Upload
karob87
View
222
Download
5
Embed Size (px)
DESCRIPTION
Materiales Avalados Por La Nsr-10 - Normas Astm
Citation preview
MATERIALES AVALADOS POR LA NSR-10(Literales F.2.1.5 - F.4.1.2 - F.4.5.3 - F.4.8.2 - F.5.2)
APLICACIÓN NORMA ASTM TÍTULO
A36/A36M JIS SS400 EN S275 BS 4360 43A 17100 St 44-2 Standard specification for Carbon Structural Steel
A529/A529M Standard specification for High-Strength Carbon-Manganese Steel of Structural Quality
A572/A572M Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A588/A588M
A709/A709M Standard specification for Structural Steel for Bridges
A913/A913M
A992/A992M Standard specification for Structural Steel Shapes
A1043/A1043M Standard specification for Structural Steel with Low Yield to Tensile Ratio for use in Buildings
Tubería Estructural
A500
A501 Standard specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A618/A618M
A847/A847M
Tubería Circular A53/A53M Gr.B
Planchas
A36/A36M Standard specification for Carbon Structural SteelA242/A242M Standard specification for High-Strength Low-Alloy Structural Steel
A283/A283M Standard specification for Low and Intermediate Tensile Strenght Carbon Steel Plates
A514/A514M
A529/A529M Standard specification for High-Strength Carbon-Manganese Steel of Structural Quality
A572/A572M Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A588/A588M
A709/A709M Standard specification for Structural Steel for Bridges
A852/A852M
A1011/A1011M
A1043/A1043M Standard specification for Structural Steel with Low Yield to Tensile Ratio for use in Buildings
Barras Planas
A36/A36M Standard specification for Carbon Structural Steel
A529/A529M Standard specification for High-Strength Carbon-Manganese Steel of Structural Quality
A572/A572M Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A709/A709M Standard specification for Structural Steel for Bridges
Láminas
A606/A606M
A1011 SS, HSLAS y HSLAS-F
A6/A6M
A216/A216M Gr.WCB-S11
A668/A668M Standard specification for Steel Forgings, Carbon-Alloy, for General Industrial Use
Pernos
A307
A325/A325M
A354
A449 Standard Specification for Quenched and Tempered Steel Bolts and Studs
A490/A490M
F1852
F2280
TuercasA194/A194M
A563/A563M Standard Specification for Carbon and Alloy Steel Nuts
ArandelasF436/F436M Standard Specification for Hardened Steel Washers
F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F959/F959M
A36/A36M Standard specification for Carbon Structural Steel
A193/A193M
A354
A449 Standard Specification for Quenched and Tempered Steel Bolts and Studs
A572/A572M Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
EQUIVALENCIA NORMA Japanese Industrial Standards JIS
EQUIVALENCIA NORMAS Europäische Normen EN
EQUIVALENCIA NORMAS British
Standards BS
EQUIVALENCIA NORMAS Deutsches Institut für
Normung DIN
Perfiles estructurales laminados en caliente
Standard specification for High-Strength Low-Alloy Structural Steel, up to 50ksi (345MPa) Minimum yield Point, with Atmospheric Corrosion Resistance
Standard specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, produced by Quenching and Self-Tempering process
Standard specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in rounds and shapes
Standard specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
Standard specification for Cold-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing with improved Atmospheric Corrosion Resistance
Standard specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
Standard specification for High-Yield-Strenght, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
Standard specification for High-Strength Low-Alloy Structural Steel, up to 50ksi (345MPa) Minimum yield Point, with Atmospheric Corrosion Resistance
Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
Standard specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strenght Low-Alloy, High-Strenght Low-Alloy with improved Formability, and Ultra-High-Strength
Standard specification for Steel, Sheet and Strip, High-Strenght, Low-Alloy, Hot-Rolled and Cold-Rolled, with improved Atmospheric Corrosion Resitance
Standard specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strenght Low-Alloy, High-Strenght Low-Alloy with improved Formability, and Ultra-High-Strength
Perfiles estructurales pesados laminados en
caliente o armados (aletas de espesor superior a 38mm y placas de espesor superior a 50mm)
Standard specification for General Requirments for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
Fundición y piezas forjadas de acero
Standard specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
Indicadores directos de tensión tipo Arandela
CompresibleStandard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
Pernos de anclaje y barras roscadas
Standard specification for Alloy-Steel and Stainless Steel bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
MATERIALES AVALADOS POR LA NSR-10(Literales F.2.1.5 - F.4.1.2 - F.4.5.3 - F.4.8.2 - F.5.2)
APLICACIÓN NORMA ASTM TÍTULOEQUIVALENCIA NORMA Japanese Industrial Standards JIS
EQUIVALENCIA NORMAS Europäische Normen EN
EQUIVALENCIA NORMAS British
Standards BS
EQUIVALENCIA NORMAS Deutsches Institut für
Normung DIN
A588/A588M
F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength- Fasteners for Use in Structural Applications, Includes Supplement- Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding- Specification For Low-alloy Steel Electrodes For Shielded Metal Arc Welding
- Specification for Carbon Steel Electrodes and Fluxes for Submerged-Arc Welding
- Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
- Carbon Steel Electrodes for Flux Cored Arc Welding
- Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc Welding
- Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding
- Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding
- Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding
- Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding
- Welding Consumables - Gases and Gas Mixtures for fusion welding and Allied Processes
Conectores tipo espigo - Structural Welding Code-Steel
A36/A36M Standard specification for Carbon Structural SteelA242/A242M Standard specification for High-Strength Low-Alloy Structural Steel
A572 Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A283/A283M Standard specification for Low and Intermediate Tensile Strenght Carbon Steel Plates
A529/A529M Standard specification for High-Strength Carbon-Manganese Steel of Structural Quality
A606
A500
A847
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Pernos de anclaje y barras roscadas
Standard specification for High-Strength Low-Alloy Structural Steel, up to 50ksi (345MPa) Minimum yield Point, with Atmospheric Corrosion Resistance
Metal de aporte y fundente para
soldadura
Perfiles de lámina formada en frío
A1011/A1011M SS Gr. 30, 33, 36 tipos 1 y 2, 40, 45, 50 y 55
Standard specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strenght Low-Alloy, High-Strenght Low-Alloy with improved Formability, and Ultra-High-Strength
A1011/A1011M HSLAS Clase 1 y 2 Gr. 45, 50, 55, 60, 65 y 70
A1011/A1011M HSLAS-F Gr. 50, 60, 70 y 80
A588/A588M (345Mpa hasta 100mm (4") de espesor)
Standard specification for High-Strength Low-Alloy Structural Steel, up to 50ksi (345MPa) Minimum yield Point, with Atmospheric Corrosion Resistance
Standard specification for Steel, Sheet and Strip, High-Strenght, Low-Alloy, Hot-Rolled and Cold-Rolled, with improved Atmospheric Corrosion Resitance
A653/A653M SS Clase 1 y 3 Gr. 33, 37, 40 y 50 Standard specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip ProcessA653/A653M HSLA Tipo A y B Gr. 40, 50, 60, 70 y 80
A792 Gr. 33, 37, 40 y 50 Clase 1
Standard specification for Steel Sheet, 55% Aluminium-Zinc Alloy-Coated by the Hot-Dip Process
Standard specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in rounds and shapes
A1008 SS Gr. 25, 30, 33 Tipos 1 y 2, y 40 Tipos 1 y 2
Standard specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High Strength Low-Alloy, High-Strength Low-Alloy with improved Formability, Solution Hardened, and Bake Hardenable
A1008 HSLAS Clases 1 y 2 Gr. 45, 50,55, 60, 65 y 70
A1008 HSLAS-F Gr. 50, 60, 70 y 80
Standard specification for Cold-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing with improved Atmospheric Corrosion Resistance
A875 SS Gr. 33, 37, 40 y 50 Clase 1 y 3 Standard specification for Steel Sheet, Zinc-5?% Aluminium Alloy-Coated by the Hot-Dip
ProcessA875 HSLAS Tipos A y B Gr. 50, 60, 70 y 80
A1003 ST Gr. 50H, 40H, 37H, 33H
Standard specification for Steel Sheet, Carbon, Metallic-and Nonmetallic-Coated for Cold-Formed Framing Members
A1039 SS Gr. 40, 50, 55, 60, 70 y 80
Standard specification for Steel, Sheet, Hot-Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
Aleaciones de Aluminio tratadas en caliente
ISO 209-1: Aleaciones trabajadas de aluminio y de aluminio - composición Química y formas de productos - la Parte 1: Composición química. Especifica las definiciones y el acomodamiento químico. Da reglas para redondear, para la determinación del cumplimiento (A de anexo) y guía para designaciones de la ISO (B de anexo). Edición 1989. Estado: retirada.
Aleaciones de Aluminio no tratadas en caliente
MATERIALES AVALADOS POR LA NSR-10(Literales F.2.1.5 - F.4.1.2 - F.4.5.3 - F.4.8.2 - F.5.2)
NORMA NTC EQUIVALENTE
MATERIALES AVALADOS POR LA NSR-10(Literales F.2.1.5 - F.4.1.2 - F.4.5.3 - F.4.8.2 - F.5.2)
NORMA NTC EQUIVALENTE