MAXAIR® Systems – A full-capability line of particulate filtering PAPRs

MAXAIR CAPR®, 700, 800, and 300 advanced designs incorporate highly differentiated advantages over conventional Powered Air Purifying Respirator designs.

• Integrated Helmet eliminates cumbersome breathing tubes and bulky waist mounted blower units• Always-On-And-Visible Safety Status LEDs ensure real-time awareness of safe air flow and battery

charge level• 3-Level User Selectable Air Flow Ranges provide added user comfort• Easy de-con saves time and cost• Easy don/doff, Low Cost Disposables plus No Fit Testing make MAXAIR the most cost effective system

MAXAIR Systems provide the most cost effective solutions for High Efficiency particulate filtration protection across many industries and for many applications.

CAPR Cuff CAPR Shroud CAPR Double Shroud CAPR Hood

700 Cuff 700 Shroud

800 Hood 300 Double Shroud Hood

MAXAIR’s highly integrated design eliminates the conventional PAPR’s reliance on cumbersome air tubes and bulky blower units. When compared to conventional PAPRs and N95 respirator masks, the lightweight MAXAIR helmets, with their positive pressure air flow and unique safety LEDs, standout as a superior method of personal respiratory protection.

The CAPR Cuff System is optimized for routine use while caring for patients in health care facilities. It includes a unique, Snap On - Snap Off DLC (Disposable Lens Cuff).

CAPR provides greater safety, comfort, convenience, patient friendliness, and cost effectiveness than N95s and conventional PAPRs due to MAXAIR’s exclusive NO Hose, NO bulky blower unit, and unique LED safety indicators.

CAPR Shroud and Hood Configurations are available for added contact protection and higher risk situations.

MAXAIR CAPR COMPETITOR (CONVENTIONAL) PAPRs

NOTE: Face seals, Cuff, Shroud, or Hood, and Comfort Strips for the front Helmet headband are purchased separately, as are additional filters.

MAXAIR CAPR Standard System Configuration Components

The 700 Cuff Systems are optimized for medical health care facilities, including Emergency Preparedness, ED, EH&S, and general patient care. The 700’s unique, Disposable Cuff and integrated Filter Cover-Lens provides fast de-con and change between uses. Greater safety, comfort, convenience, patient friendliness, and cost effectiveness verses conventional PAPRs is due to MAXAIR’s exclusive NO Hose, NO bulky blower unit, and unique LED safety indicators.The 700 Shroud Systems are optimized for activities throughout medical health care facilities as well as many bio-medical and industrial applications. They include a unique, Disposable Shroud and integrated Filter Cover-Lens for faster de-con, and greater safety, comfort, convenience, patient friendliness, and cost effectiveness. The shroud can easily be changed to a cuff for added versatility.

NOTE: Face seals, Cuff or Shroud, and Comfort Strips for the front and rear Helmet headbands are purchased separately, as are additional filters

All MAXAIR Systems’ Helmets have exclusive always on and visible safety LEDs to uniquely provide unobtrusive visual monitoring, in the users peripheral vision, of all-important indications of battery charge status and air flow.

These indicators eliminate the need for peripheral test equipment and off-use time for manually measuring these key operational safety parameters.

MAXAIR Systems’ Helmets have five LED Safety Status Indicators located on their underside front that are always visible in the user’s peripheral vision. They alert the user to the safe operating conditions of the system.

During real-time use, they provide advanced warning alert to the user when the MAXAIR System is no longer able to maintain adequate airflow and/or battery charge to provide adequate or continuing protection for the user.

MAXAIR 700 Standard System Configuration Components

The MAXAIR integrated system design minimizes the number of parts and interconnections, thereby reducing time for assembly and disassembly. Fewer parts with smoother design consistency greatly facilitates ease, speed, and cost effectiveness of de-con between uses.

The 800 Hood Systems are optimized for maximum contact protection and versatile infection prevention activities in Bio-Medical and Industrial, pharmaceutical manufacturing, and Nuclear applications. They include a single piece integrated 360o protection breathable hood-filter-lens for easy change-out between uses. MAXAIR provides the advantage of greater safety, comfort, convenience and cost effectiveness as compared to conventional PAPRs due to MAXAIR’s exclusive NO Hose, NO bulky blower unit, and unique LED safety indicators.

The 300 Double Shroud Hood System is optimized for maximum contact protection and versatile infection prevention in Bio-Medical and Industrial applications such as BSL-3 labs. The single piece 360o protection hood with breathable double shroud, High Efficiency filter, and lens allows easy change-out provides maximum protection and allows easy change-out between uses. For these very high risk applications, the 300 System provides greater safety, comfort, convenience and cost effectiveness than conventional PAPRs. MAXAIR provides a unique combination of LED safety indicators plus NO Hose, plus NO bulky blower unit.

NOTE: Hoods and Comfort Strips for the front and rear Helmet headbands are purchased separately

MAXAIR 800 and 300 Standard System Configuration Components

CAPR Cuff System Components Competitor Cuff System ComponentslHighly integrated, few items lLow Level of integration, many componentslEasy, time conserving de-con lTime consuming, arduous de-con

MAXAIR Helmets are highly reliable with virtually no maintenance. The integrated blower air flow is uniquely microcomputer controlled to automatically compensate for filter loading during real-time use to ensure continuous safe air flow to the user.

MAXAIR Helmets and Helmet Accessories

Order no. Description QTY

2070-03 CAPR System Helmet (includes 2071-01 Liner)

1/Box

2061-03 Filter Cover Cap (FCC)(2070-03 Helmet)

3/Box

2071-01 Helmet Liner (2070-03 Helmet)

1/Box

2065-03 2000-700/800 Helmet 1/Box

2061-01 Filter Cover(2065-03 Helmet)

1/Box

2025-03 2000-300 Helmet 1/Box

2000-201 Comfort Strips (Typically replaced when the face seal, Cuff, DLC, Shroud, Hood, is replaced)

36/box

00722175 Helmet Power Cord (59”) 1ea

00722152 Right Angle Helmet Power Cord (49”) 1ea

MAXAIR’s unique channeled air flow and low-noise motor provide the quietest and coolest PAPR for excellent communications and protection against heat stress.MAXAIR provides users more selection than conventional PAPRs of air flow volume to match their work level and breathing requirements.

MAXAIR Filters and Filter Cartridges

Use with Helmet

Order No. Description QTY Filter Cartridge Use With

2000-36 Battery

2000-30Battery

2070-03

2164-10 HE Filter Cartridge 3/Box

2165-10 Post Filter Cartridge

(required for all hood configurations)

3/Box

2163-10XP HE Filter Cartridge 3/Box

2065-03 2025-03

2160-10 HE Filter Cap 10/Box

MAXAIR’s advantages helmet designs are matched only by their advantageous face seal and head cover designs.Low Cost, fast don/doff designs as the CAPR DLC (Disposable Lens Cuff), provide the lowest cost respiratory protection for long term routine use.

MAXAIR Face Seals and Head Covers

Use with Helmet

Order No. Description QTY

2070-03

2365-02SM DLC – Small/Medium 40/Box

2365-02ML DLC – Medium/Large 40/Box

2260-05SM

2260-05ML

DLC Shroud – Small/Medium

DLC Shroud – Medium/Large

20/Box

20/Box

2261-01SM

2261-01ML

DLC Double Shroud – Small/Medium

DLC Double Shroud – Medium/Large

20/Box

20/Box

2270-01SM

2270-01ML

DLC Pre Filter Hood – Small/Medium

DLC Pre Filter Hood – Medium/Large

20/Box

20/Box

2270-03SM

2270-03ML

DLC XP Pre Filter Hood – Small/Medium

DLC XP Pre Filter Hood – Medium/Large

20/Box

20/Box

Cost analyses vs. both N95 Mask respirators and conventional PAPRs demonstrate that MAXAIR Systems with their lower cost disposables provide lower ongoing operating cost while providing superior safety, comfort, and convenience.

Unique face seal and head cover designs are both comfortable and cost effective.MAXAIR’s face seals and head covers provide appropriate PPE protection across many industries and numerous applications where respiratory protection is an issue.

MAXAIR Face Seals and Head Covers

Use with Helmet

Order No. Description QTY

2065-03

2360-012360-02

Disposable Cuff, SM

Disposable Cuff, ML

20/Box

20/Box

2260-01

2260-02

Disposable Shroud, SM

Disposable Shroud, ML

20/Box

20/Box

2000-25DMA Hood 10/Box

2000-29 Pre-Filter Hood 10/Box

2025-03 2120-10 Hood, Double Shroud 20/box

MAXAIR’s Li-Ion Batteries provide industry leading, extended continuous use per charge.The Standard battery provides up to 8-10 hours of continuous use.The Extended battery provides up to 16-20 hours of continuous use.

MAXAIR Batteries and Belts

MAXAIR Chargers

Order No. Description QTY

2000-36 Li-Ion Battery 4 Cell(Typically 8-10 hours continuous use per full charge)

1/Box

2000-30 Li-Ion Battery 8 Cell(Typically 16-20 hours of continuous use per full charge)

1/Box

2000-76 Battery Belt 1/Bag

Order No. Description QTY

2600-01 Battery Charger

1/box

2601-06

6-Gang Charger includes six 2600-01 Chargers

6 Gang Charger

1/box

2601-06B

6-Gang Charger Bracket accommodates up to six 2600-01 Chargers, purchased separately.

6 Gang Charger Bracket

1/box

Order No.

Description QTY

2000-204 Helmet Hooks

6/pkg

2000-206 Liner Foam Kit

5/box

2000-SB Carry Bag 1/pkg

MAXAIR System Accessories

MAXAIR Systems offers the industry’s total solution for deploying optimum safe, comfortable, and cost effective PPE. The MAXAIR 2780-06 CART provides storage of six systems and typical accessories. The mobile CART provides rapid deployment around the institution as well as secure storage when systems are not in use.

Storage

Mobility

Security

Everything you need

Wherever you need it

Whenever you need it

• Six Complete MAXAIR Systems• Charging Station – All batteries, Always Ready• Box of Comfort Strips• Boxes of Current-Use and Spare DLCs• Space for Box of Gloves• Decon Wipe Cannister Holder• Quick Reference Don/Doff, Assembly Poster• Single Lock for Doors and Lid