Idra OL-4000

Cells Three (3)

Available

Cells Include: Idra OL 4000 cold chamber machine, Striko/Dynarad Ingot Preheater, Striko/Dynarad

Melting Furnace, Striko/Dynarad Holding Furnace, Dosing Pumps, ABB 6600 robot for die spraying, ABB

6600 robot for Extracting, Two (2) Idra (RoboPress) 72 ton gap frame, tilt bed trimming presses, One (1)

Metal Mechanics 75 Ton trimming press, parts handling conveyors, scrap handling conveyors.

Call our office at 1.847.360.9170 to schedule your under-power inspection of any of these three machines. The

newest machine, installed in 2006 has less than 7,000 hours of total run time. Take advantage of this rare

opportunity to purchase these excellent machines at fraction of the new cost.

Maximum Rated Tonnage 4,400 Tons

Magnesium & Aluminum Capable

Installed in 2006

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Below is a sample of cold chamber die cast machines available from stock. To view all available machines,

surf to www.diecastmachinery.com click on “View Machinery” and click on the “Cold Chamber” link.

Prince Model 3569 CCA, 3,500 tons locking force, 69 inches(1752 mm) clearance between tie bars, dual automatic tie barpullers, Allen Bradley PLC controls, three (3) available. Ourinventory numbers: 1530, 1531 and 1532 (left picture)

Buhler Evolution 220 DV-2.0, new in 2001. Equipped with 2243(metric ton) clamping force, 63 inches (1600 mm) clearancebetween tie bars. Includes Striko-Westofen Dosing Furnace,Wollin Programmable Die Sprayer, ABB Robot extractor, 50 TonTechnopress, modle KZP-50. Our inventory number: 1575

Prince Model 2057 CCA, 2,000 ton locking force, 57inches (1447 mm) clearance between tie bars, dualautomatic tie bar pullers, PLC controls, new 1989. Call oremail for details. (Right picture)

Buhler Evolution 180 DV-4.0 New in 2005. Equipped with1835(metric tons) clamping force, 55 inches (1400 mm)clearance between. tie bars. Complete cell includes:Striko-Westofen Dosing Furnace, ABB IRB 6600 robotSprayer on fixed platen, ABB IRB 6600 robot extractor (onfloor) and 50 ton trim press. Our inventory number: 1577(Left picture)

Prince 1246 CCA , 1,200 ton locking force, 46.5 inches (1181 mm)clearance between tie bars, dual automatic tie bar pullers, Allen BradleyPLC 5 series controls, new between 1990 - 2000 (six available). All are complete cells including MPH furnaces, Rimrock auto ladles, Rimrock410 Sprayers, ABB Robots and Metal Mechanics 75 ton four postvertical trim press. Call or email for details. (Pictured Right)

Prince 3569 - 3,500 ton

Prince 2057 CCA - 2,000 ton

Buhler Evolution 180 DV-4.0 1800 Ton

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Prince Model 1651 CCA, 1,600 ton locking force, 51 inches (1295mm) clearance between tie bars, dual automatic tie bar pullers, PLCcontrols, new 1986 rebuilt in 2004. This is a complete cell includingAll Therm furnace, Rimrock 405 auto ladle, Rimrock 410 Sprayer,GE/Fanuc S-400 Robot and Metal Mechanics 75 ton four postvertical trim press. Call or email for details.

HPM II-1200-A, 1200 ton locking force, 45 inches (1143 mm)clearance between tie bars, new in 1989. Equipped with PLCcontrols, hydraulic bumper plate ejection, automatic tie bar puller oftop operator side tie bar, HPM servo-shot plus shot system, centerand -15" shot positions Our Inventory number: 1436 (Pictured right)

HPM II-900-A, 900 ton locking force, new in 1998, only 10,199 totalrun hours since new. Equipped with Automatic Tie Bar Puller on TopOperator Side Tie Bar, Allen Bradley SLC 5/03 Controls. Ourinventory number: 1588 (Pictured Left)

Prince 940 CCA, 950 ton locking force, 40.5 inches (1028 mm)clearance between tie bars, dual automatic tie bar pullers, AllenBradley PLC 5 controls, new 1990. Just available, call or email fordetails.

Idra OL/900 DG, 900 ton (metric) cold chamber die cast machine,34.5 inches (875 mm) clearance between tie bars, Allen BradleyPLC controls. This is a complete cell including: Dynarad MS-600electric Melting/holding furnace, Rimrock model 305 auto ladle,Rimrock 414 die sprayer, ABB/Rimrock Model 4400 foundryrobot (new 2007) for automated parts extraction & trimming . Justavailable, call or email for details. (Pictured Right)

Ube 800 HVSC , 800 (metric) ton clamping force, with squeeze cast,slurry, semi-sold, New Rheocast processes capabilities, includes: diecast machine, furnace, Ube auto-lade, Ube RRS-8 slurry productionequipment, Fanuc robot for slurry loading, Ube sprayer, Fanuc robotfor extracting castings. This is a horizontal clamp, vertical dockingshot machine! Our inventory number: 1417. (Pictured left)

7 Ube 800 HVSC Machine

HPM II-1200-A

HPM II-900-A

Idra OL/900 DG

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Toshiba DC-800 C, four available, new 1993 - 1996.Equipped with 800 ton (metric) clamping force, 33.5 inches(850 mm) tie bar clearance. Each machine equipped withgas furnace, Toshiba auto-ladle, Toshiba Die Sprayer andToshiba controls. Priced to Sell!. (Pictured right)

Italpresse IP-750 SC , 750 ton (metric) clamping force.Equipped with Italpresse SC shot control system andItalpresse Siemens PLC controls. Just available - call oremail for details.

Italpresse Model IP-750-SC, 700 ton (metric) cold chamber diecast machine, new in 2000. Equipped with top operator side tiebar puller, Italpresse SC shot control system, Siemens PLCcontrols. Just available, call or email for details. (Pictured Left)

Ube 700 G II, 700 ton clamping force, new 1996.Complete cell including: Ube Uni-FF shot system,Rimrock model 410 die sprayer, Rimrock model 320operator side extractor, Ube factory installed auto ladle,Dynarad Model EC-1500 electric melting/holdingfurnace. Just available - call or email for details.

Buhler H-630-SC 725 ton clamping force, new 1995. Complete cellincluding: automatic ladle, automatic die sprayer and Pickmatextractor. Just available - call or email for details. (Pictured above)

Prince 629 CCA, 650 ton clamping force and 29.25 inch (742 mm)clearance between tie bars. This machine was rebuilt and upgradedby Prince including the installation of new Prince Binary shot end,new Allen Bradley PLC 5 series controls with Prince softwarepackage. Our inventory number: 1413. (Pictured Left)

7Prince 629 CCA - Our Inventory Number: 1413

One of four Toshiba DC-800 Machines

Italpresse IP-700 - New in 2000

Buhler H-630 SC - Complete Cell

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Prince, Model 528 CCA, 500 ton clamping force, 28 inches(711 mm) clearance between tie bars. Equipped with:Automatic Tie Bar Puller on Top Operator Side Tie Bar,Allen Bradley PLC 5/25 Controls, Prince Pro-AnalyzerHuman Interface and Trabon automatic lubrication system.Machine is a complete cell and also includes: StrikoDynarad EC 950 electric holding furnace, Rimrock 305auto ladle and Rimock 320 Multi-Link Extractor withTriangle Controls, Advance Reciprocating Die Sprayer anda mesh type parts conveyor with forced air cooling.(Pictured left)

Buhler H-400 SC, 500 ton clamping force, new 1993, limiteduse, only three years in production, 25.19 inches (640 mm)clearance between tie bars, Purchase of machine includesBuhler Pickmat extractor and Snair automatic ladle. (PicturedRight)

Buhler H-400 SCL

HPM II-400-A, 400 ton clamping force, cold chamber Magnesium & Aluminum capable die casting machine, serialnumber: 88-281, new in 1988. Equipped with Allen Bradley SLC 5/03 controls, top operator side automatic tie barpulling system, three core circuits, hydraulic bumper platen ejection system, hydraulic motorized die height adjustment,center & six inch below center shot positions, Trabon lubrication system. DCM Inventory Number: 1789.

Prince 528 CCA - Complete Cell

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Complete Die Cast Cell

HPM II-400-A, 400 ton clamping force Cold Chamber Magnesium/Aluminum capable die casting machine. Equippedwith Allen Bradley SLC 5/02 controls with Panel View 550 display, three core circuits, automatic tie bar pulling systemon top, operator side tie bar, hydraulic bumper platen ejection system. This is a complete cell which includes a Rimrockmodel 410 reciprocating die sprayer, ABB 4400 Extractor (new in 2004), Metal Mechanics model DCT 35, 35 ton fourpost vertical trim press and a Dynarad MS-400 melting and holding furnace. (Pictured Below)

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Idra (Robopres), Model: TNC 72, 72 Ton Hydraulic Gap FrameTrim Press with Tilting Bed, Serial Number: 148, Manufacturednew 2005. Specifications include: moving platen stroke of 1,400mm, bed (base platen) tilts 130 degrees for dumping scrap, platensize: 1800 mm (left to right) by 1200 mm (front to back). Total offour (4) units available. (Pictured right)

Metal Mechanics 35 Ton 4 Post Hydraulic TrimPress, serial number 22611. Equipped with AllenBradley SLC 500 controls, three (3) core circuits,Air Safety Ratchet, Dual Operator pull-out bars,37-1/4" left to right, by 27-1/4" front to backclearance between tie bars, 32" daylight, 23" stroke,9" shut height. (Pictured below)

Metal Mechanics, Model: DCT 75, 75 Ton Wide Bed 4 PostHydraulic Trim Press, Serial Number: 2781, New in 2006,Equipped with Allen Bradley SLC 5/01 controls, three (3) sidecore/punch circuits, Air Safety Ratchet, 72" left to right, by 65"front to back clearance between tie bars, 86" left to right by 78 frontto back bed size, 80" daylight, 60" stroke, 60" shut height.(Pictured above)

Idra (Robopres) TNC 72 - Four (4) Available

Metal Mechanics 75 Ton Press

Metal Mechanics 35 Ton

This is only a sample of trim presses that are available, to viewall available trim presses go to www.diecastmachinery.com click on “view machinery” and then click on either: “Trim Presses, Vertical” or click on “Trim Presses, Horizontal”

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Mokon 18 KW Dual Zone Die TemperatureControl Unit - 17 Units in Stock!

Samsco SWE-I 33 Gallon Per Hour Waste WaterEvaporator - Long Life Stainless Steel Tank

Industrial Innovations Hone for Shot Sleeves

Fondarex Model P Vacuum SystemTwo Units Available (including valve blocks)

This is only a sample of plant support items that areavailable. To view all available plant support items,go to www.diecastmachinery.com click on “viewmachinery” and then click on “Plant Support Items”

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Frech model DAW 20 S DCRC Like new Condition - New in 2001 - Less than one year of use. Equipped with FrechData Control Real-Time Shot System, 24 ton Hot Chamber Die Cast Machine, very low hours, includes Frech diesprayer and MelTec electric melting furnace, serial number 1412904 and 1412903 - Two machines available.

Brother TC-R2A high speed vertical CNC mill/drill/tapmachine, new in 2003 and Okuma & Howa CNC Lathe.

To view more pictures of the above machines or other hot chamber machines, go to: www.diecastmachinery.com click on “View Machinery” and then click on “Hot Chamber” and then click on ID # 1528.

To view these and other CNC machines, go towww.diecastmachinery.com

and click on “View Machinery” and then click on the “CNC” link.

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

ID # Manufacturer Size Description

1611 ABB 4400 Foundry plus robot for extracting die castings

1720 ABB 6400 Foundry grade industrial robot used to load/unload die cast machine

1721 ABB 6400 Foundry grade industrial robot set up for die spay application

1732 ABB 6400 Foundry grade industrial robot used to load/unload die cast machine

1733 ABB 6400 Foundry grade industrial robot set up for die spay application

1702 ABB 6600 Foundry grade industrial robot set up for die spay application

1221 Advance Products 25 Advance Products, proportional, central die lube system.

1591 Fondarex P Fondarex Model P Vaccu P Minimum Fill Time Vacuum System

1592 Fondarex P Fondarex Model P Vaccu P Minimum Fill Time Vacuum System

1020 Rimrock 305 Rimrock Model 305 Auto ladle

1021 Rimrock 305 Rimrock Model 305 Auto ladle

1022 Rimrock 305 Rimrock Model 305 Auto ladle

1468 Rimrock 305 Rimrock Model 305 Auto ladle

1469 Rimrock 305 Rimrock Model 305 Auto ladle

1470 Rimrock 305 Rimrock Model 305 Auto ladle

1475 Rimrock 305 Rimrock Model 305 Auto ladle

1520 Rimrock 305 Rimrock Model 305 Auto ladle

1087 Rimrock 305 100 Assorted Size Rimrock ladle cups, unused for model 305 or 405 ladles

1481 Rimrock 310 Rimrock 310, 47 Inch stroke die spray reciprocator

1482 Rimrock 310 Rimrock 310, 47 Inch stroke die spray reciprocator

1484 Rimrock 310 Rimrock 310, 60 Inch stroke die spray reciprocator

1486 Rimrock 310 Rimrock 310, 60 Inch stroke die spray reciprocator

1155 Rimrock 410 Rimrock Model 410, 47 Inch stroke die spray reciprocator

1480 Rimrock 410 Rimrock Model 410, 47 Inch stroke die spray reciprocator

1485 Rimrock 410 Rimrock Model 410, 60 inch stroke die spray reciprocator

1487 Rimrock 410 Rimrock Model 410, 60 inch stroke die spray reciprocator

Below is a sample of die cast automation available from stock. To view all available units, surf to

www.diecastmachinery.com click on “View Machinery” and click on the “Die Cast Automation” link.

ABB IRB 4400Rimrock 405 & 410 Sprayer & ladle ABB IRB 6650 (with 7 axis linear slide)th

Die Cast Machinery, LLC Phone 1.847.360.9170www.diecastmachinery.com Fax: 1.847.360.9189

Over 1,000 pieces of die cast related machinery available at: www.diecastmachinery.com

Inventory Brand Size Model

1498 DME 810 Standard Duty, Double Unit, Hot Chamber

1497 DME 912 Standard Duty, Double Unit, Hot Chamber

1404 DME 1012 Standard Duty, Single Unit, Cold Chamber

1431 DME 1012 Standard duty, Single Unit, Cold Chamber

1433 DME 1012 Standard Duty, Double Unit, Cold Chamber

1488 DME 1012 Standard Duty, Double Unit, Hot Chamber

1491 DME 1012 Standard Duty, Double Unit, Hot Chamber

1493 DME 1012 Standard Duty, Double Unit, Hot Chamber

1501 DME 1012 Standard Duty, Double Unit, Hot Chamber

1490 DME 1013 Standard Duty, Double Unit, Hot Chamber

1494 DME 1013 Standard Duty, Double Unit, Hot Chamber

1495 DME 1013 Standard Duty, Double Unit, Hot Chamber

1403 DME 1215 Standard Duty, Single Unit, Cold Chamber

1489 DME 1215 Standard Duty, Double Unit, Hot Chamber

1496 DME 1215 Standard Duty, Double Unit, Hot Chamber

1499 DME 1215 Standard Duty, Double Unit, Hot Chamber

1500 DME 1215 Standard Duty, Double Unit, Hot Chamber

1757 DME 1215 Standard Duty, Double Unit, Cold Chamber

1758 DME 1215 Standard Duty, Double Unit, Cold Chamber

1005 DME 1518 Standard Duty, Single Unit, Cold Chamber

1006 DME 1518 Standard Duty, Single Unit, Cold Chamber

1058 DME 1518 Heavy Duty, Single Unit, Cold Chamber

1059 DME 1518 Heavy Duty, Single Unit, Cold Chamber

1060 DME 1518 Heavy Duty, Single Unit, Cold Chamber

1061 DME 1518 Heavy Duty, Double Unit, Cold Chamber

1401 DME 1518 Standard Duty, Single Unit, Cold Chamber

Below is a sample of DME type master unit die holders available from stock. To view all available units,

surf to www.diecastmachinery.com click on “View Machinery” and click on the “Tooling” link.

Die Cast Machinery, LLC3246 W Monroe Street Address Service Requested

Waukegan, Il 60085

Die Cast Machinery, LLC In this Issue:

Idra OL/4000 (Three Available)

Prince 3569 (Three Available)

Prince 2057

Prince 1246 CCA (Five Available)

HPM II-1200-A

Prince 940 CCA (complete cell)

Idra OL/900 DG (complete cell)

Ube 800 HV/SC (squeeze or slurry cast)

Ube 700 G II

Italpresse IP-750 SC (two available)

Prince 528 CCA (complete cell)

HPM II-400-A (complete cell)

Trim Presses

Plant Support Items (many types)

Frech Hot Chamber Machines

Brother CNC Machines

Die Cast Automation

DME Die HoldersUbe 800 HV/SC Horizontal Clamp, Vertical Shot, full squeeze

and slurry cast capabilities (includes slurry production equipment)