MCM

The Asset Management and Maintenance Journal May - July 2012

19

Alstom MSc [email protected] www.alstommsc.com.au

CM PRODUCTAlstom MSc is a premium provider of condition monitoring solutions to industry. The unique benefit that we offer is an integrated package of leading technologies, expert consultancy skills, training and customer support. This means that we can tailor solutions to meet the needs of our customers, ranging from fully outsourced monitoring services, through to the provision of portable and online systems complete with commissioning, training and support. In dealing with Alstom MSc, you can be assured we have the product range, technical know-how and resources to deliver and support a machinery health monitoring package that works for you.Our product range includes:• PORTABLE VIBRATION MONITORING VMI hand held vibration meters and analysers plus the world renowned range of Emerson CSi Machinery Health Analyzers with AMS Machinery Manager software.• ONLINE VIBRATION MONITORING Give your machines the best possible protection from

19

The 2012 Listing of Condition Monitoring (CM) Products and Services was compiled by Len Bradshaw (May 2012). The data given is as received from the respondents.

Listing of Condition Monitoring Products and Services

failure with smart wireless monitoring systems, online systems and full turbine supervisory protection from Emerson. • VIBRATION SENSORSThe extensive range of CTC accelerometers, cables and mounting hardware for monitoring online or inaccessible plant includes the PRO line of 4-20mA sensors for simple online monitoring and proximity probes for turbomachinery.• OIL QUALITY SENSORSThe powerful and easy to use Tan Delta Oil Quality Sensor allows online monitoring of oil condition for fixed and mobile plant.• IR THERMOGRAPHYLow cost thermal imagers from IRISYS and advanced portable and online cameras from Thermoteknix. Applications include electrical panels, mechanical and refractory fault detection.• LUBRICATION ANALYSIS PRODUCTSEmerson CSI oil analysers and laboratory data management software and UVLM greasing monitoring devices. • MEASUREMENT & TEST PRODUCTS Shaft laser alignment systems from KohTect and Emerson, new pulley and roll alignment systems from Seiffert Industrial, a complete range of ultrasonic thickness meters from Checkline,

IntroducIng Artesis McM

Artesis MCM is A new ApproACh to Condition Monitoring, providing All the benefits without the high CoMpliCAtion And Cost of trAditionAl systeMs.

Artesis MCM Monitors the Condition of equipMent driven by An eleCtriC Motor, effeCtively using the Motor itself As A sophistiCAted trAnsduCer. it requires only ConneCtion into the Motor’s eleCtriCAl supply, Avoiding the need for speCiAlised sensors. beCAuse Artesis MCM is perMAnently instAlled, it provides Continuous fAult Monitoring And doesn’t depend on expensive MAnuAl dAtA ColleCtion.

Artesis MCM uses AdvAnCed, nAsA-developed teChnology to provide A self-leArning CApAbility in A CoMpACt, AffordAble, pAnel-Mounted instruMent. it AutoMAtiCAlly teAChes itself About the norMAl operAtion environMent of your equipMent so thAt it CAn ACCurAtely identify And diAgnose fAults long before they beCoMe A threAt.

this greAtly reduCes the speCiAlist diAgnostiC skills required of the user, MAking the benefits of Condition Monitoring AvAilAble to MAny groups who hAve Considered it too diffiCult in the pAst.

NA

S AD E V E L O P E D

TECHNOLOGY

“...IT SIMPLY WORKS

SIMPLe TO InSTaLL and uSe

COnTInuOuS MOnITORIng and fauLT deTeCTIOn

ReLIabLe auTOMaTed fauLT dIagnOSIS

RObuST

COnneCTS WITh OTheR SYSTeMS

COST effeCTIve fOR WIdeST Range Of equIPMenT

mcmmotor condition monitor

www.assetpartnership.com

In Australasia, contact:Stephen YoungTHE ASSET PARTNERSHIPSuite 1, 2 Culdees Road Burwood, NSW 2136. AUSTRALIA(+ 61) 2 9715 [email protected]

Simple, effective condition monitoring

IntroducIng Artesis McM

Artesis MCM is A new ApproACh to Condition Monitoring, providing All the benefits without the high CoMpliCAtion And Cost of trAditionAl systeMs.

Artesis MCM Monitors the Condition of equipMent driven by An eleCtriC Motor, effeCtively using the Motor itself As A sophistiCAted trAnsduCer. it requires only ConneCtion into the Motor’s eleCtriCAl supply, Avoiding the need for speCiAlised sensors. beCAuse Artesis MCM is perMAnently instAlled, it provides Continuous fAult Monitoring And doesn’t depend on expensive MAnuAl dAtA ColleCtion.

Artesis MCM uses AdvAnCed, nAsA-developed teChnology to provide A self-leArning CApAbility in A CoMpACt, AffordAble, pAnel-Mounted instruMent. it AutoMAtiCAlly teAChes itself About the norMAl operAtion environMent of your equipMent so thAt it CAn ACCurAtely identify And diAgnose fAults long before they beCoMe A threAt.

this greAtly reduCes the speCiAlist diAgnostiC skills required of the user, MAking the benefits of Condition Monitoring AvAilAble to MAny groups who hAve Considered it too diffiCult in the pAst.

NA

S AD E V E L O P E D

TECHNOLOGY

“...IT SIMPLY WORKS

SIMPLe TO InSTaLL and uSe

COnTInuOuS MOnITORIng and fauLT deTeCTIOn

ReLIabLe auTOMaTed fauLT dIagnOSIS

RObuST

COnneCTS WITh OTheR SYSTeMS

COST effeCTIve fOR WIdeST Range Of equIPMenT

mcmmotor condition monitor

www.assetpartnership.com

In Australasia, contact:Stephen YoungTHE ASSET PARTNERSHIPSuite 1, 2 Culdees Road Burwood, NSW 2136. AUSTRALIA(+ 61) 2 9715 [email protected]

Simple, effective condition monitoring


20

• SYSTEM DESIGN COMMMISIONING:Online system commissioning, DCS integration, instrumentation testing.• REMOTE MONITORING &DIAGNOSTIC CENTRE (RMDC): Alstom MSc can remotely monitor your critical machines from our RMDC in Melbourne.

apt Group (of Companies)

[email protected] www.aptgroup.com.au

CM PRODUCTSThe apt Group (of Companies) has Exclusive Distribution rights for a number of well respected Condition Monitoring Products, for assessing Mechanical & Electrical plant.The range is suitable for both large and small industrial facilities, production critical and balance of plant machines.• SPM Instrument – Condition Monitoring SolutionsA wide product portfolio is available, from high-tech portable instruments to online systems and comprehensive, advanced software. SPM (Shock Pulse Method) is a patented technique for using signals from rotating rolling bearings as the basis for efficient condition monitoring of machines. From the innovation of the method in 1969 it has now been further developed and broadened and is now a worldwide accepted philosophy for condition

Ultrasonic fault detectors from EFI, strobes from Checkline and tachometers from Compact• REMOTE VIEWING SCOPES: We have a comprehensive new range of industrial videoscopes for machinery inspections.CM SERVICESAlstom MSc has a 20 strong technical team, with experienced condition monitoring technicians and engineers in every mainland state providing a variety of technical services.• TRAINING:We partner with the globally recognized Vibration Institute to offer their certification program, as well as a range of courses on CM other technologies.• CUSTOMER SUPPORT: Our entire range of products is backed up by our dedicated direct support team.• ROTOR DYNAMICS:Multichannel monitoring, troubleshooting and balancing on gas, steam, hydro and wind turbines.• VIBRATION MONITORING:Routine vibration surveys, advanced troubleshooting and diagnostics.• ALIGNMENT AND BALANCING:In-situ balancing, shaft alignment and pulley alignment.• IR THERMOGRAPHY:Electrical, refractory and mechanical routine scanning and investigations.• OIL ANALYSIS:Full range of laboratory tests for contamination detection, wear analysis and lubricant condition.• CM PROGRAM ASSISTANCE: Database tailoring, mentoring, auditing.

20

monitoring of rolling bearings and machine maintenance. SPM®HD is a refined version of the classical True SPM®-method, using digital signal processing and advanced algorithms, to ensure the highest possible quality of measurement results, even on low speed machines – down to 1 RPM.These intelligent solutions from SPM Instrument, are cost-effective, constructive and complete. They make an excellent foundation for a proactive approach to maintenance and to integrate into normal maintenance activities, providing an overall picture. Immediate and evaluated condition information is presented as green – yellow – red condition codes, for instant and easy recognition of trouble spots. This greatly improves the effectiveness of available resources. The range includes:

Portable Instruments – the BearingChecker is a lightweight and pocket sized instrument for measurement and evaluation of bearing condition, the VibChecker provides fast and cost effective on-site vibration measurements and assessment, whereas the Leonova™ Infinity is a multifunction handheld data logger and analyser.Continuous Monitoring – the MG-4 is a standalone continuous monitoring unit, the CMM is of modular configuration, whereas the Intellinova® is a high performance online system; all use well-proven measurement methods and modern technology. Shaft Alignment & Balancing - is an optional Leonova™ Infinity function. When applied, component wear will be reduced, downtime will be minimised and energy consumption lowered. A wide range of SPM Shim kits, balance weights, sensors & accessories are also available.


TechnologyPart of the apt Group

For full specifi cations & product brochures visit aptgroup.com.au or call our friendly sales team on 1300 700 002.

RESELLERS WANTED

Bearing monitoring as you’ve never seen it!

Immediate evaluation in . . . Utilised in bearings operating from 1 RPM – 20,000 RPM

Removes irrelevant signals

Crystal clear root cause analysis

Razor sharp spectrum andtime signal


21

Mechanical DisciplineMachinery Diagnostics; Vibration Analysis; Modeling; Alignment; Balancing; NDT; Oil Analysis; Reliability Analysis.Electrical Discipline (LV & HV) Motor Circuit Analysis; Electrical Signature Analysis; Thermal Imaging; Switchboard Inspections; Power Factor Correction/Condition Analysis; Insulation Resistance; Sweep Frequency Response Analysis; Tan Delta; Excitation Current; Partial Discharge Etc.For Substations, Circuit Breakers, Busbars, Motors, Transformers, DC Systems and Power Cables. Support ServicesPlant Surveys; Installation & Commissioning; Database Establishment/Management; Data Analysis; Training/Seminar Programs; Technical Support; Repair & Calibration.On-site and remote data analysis/management services are available “around the clock”.The apt Group (of Companies), promote Precision Engineering / Maintenance practices. Both in-house personnel and world-renowned advisors are available to undertake site audits, review in-house processes and assist with change as needed.

Aquip Systems

[email protected] www.aquip.com.au

CM PRODUCTS PRÜFTECHNIK’s Condition Monitoring products include both online and offline formats. The OMNITREND PC platform is common to all systems, allowing you to create comprehensive databases and archives along with flexibility and reliability

• ALL-TEST ProTM – Electric Motor DiagnosticsA comprehensive range of hand held instruments covering off-line and on-line testing of motors, generators and transformers.To detect & measure the severity of AC motor stator and rotor problems, DC motor field winding problems, power problems and cable issues. Motor Circuit Analysis (MCA) - portable off-line static impedance based testing instruments, assess the condition of AC/DC motors, providing in-depth analysis of the motor circuits - turn-to-turn shorts, open turns/coils, reversed coils, coil-to-coil shorts, connection defects, air gap defects, rotor defects - broken bars, eccentricity and casting voids.Electrical Signature Analysis (ESA) - instrumentation for complete on-line dynamic Motor/Power Diagnostics. • Guide Infrared Cameras For Predictive Maintenance; Research Development; Machine Vision and Surveillance.• APIPro – Asset Management Software and APT – Asset Performance ToolsFor managing resources; scheduling activities; tracking performance; calculating and optimizing asset performance.

CM SERVICES The apt Group (of Companies) is an Independent Engineering Consultancy – providing Condition Monitoring Services, focusing on Plant Reliability.Contractual/one-off plant surveys, project engineering and advise in system/component selection/implementation is available. Highly qualified personnel apply best practices, international standards and corrective recommendations in the following disciplines:

21

OFF-LINE SYSTEMS: Data collectors and Analysers:VIBXPERT II: A high performance, full-feature 1 or 2 channel FFT data collector and signal analyzer for the monitoring & diagnosis of machine condition. Full VGA colour screen for immediate analysis. Optional features include Balancing and Orbits.VIBSCANNER: Expandable mid-range data collector for vibration data, temperature, speed and process parameters. Add-on modules available for Full Spectrum, Time Waveform, Balancing & Laser Alignment.VIBCODE: The breakthrough vibration transducer with automatic measurement point identification for all systems, guaranteeing accuracy, repeatability and measurement integrity.

ON-LINE:Machine protection and Vibration AnalysisVIBNODE, VIBROWEB XP, VIBROWEB, VIBRONET SIGNAL MASTER : Intelligent machine monitoring systems that can perform measurements, evaluation, archiving & alarm warning. Very-fast-multiplexer systems are available with up to 120 measurement channels. The internal web server & email server within these systems provides convenient remote access from any PC.

Prüftechnik Laser Alignment 25 years of excellence from the Inventors and Market Leaders!Rotalign Ultra: The tool of choice for Service providers and OEMs, the Rotalign Ultra is now capable of performing Vibration Acceptance checks with the new VIBTOOL functionality.Measuring vibration levels to ISO 10816-3 standards, the VIBTOOL sends data to Rotalign Ultra via Bluetooth for storage along with Alignment data and report generation. Many new

features are now available including ; flatness, positional displacement measurement, parallelism, multi-coupling, and bore alignment.

New Modular Systems:Because one size does not fit all! OPTALIGNsmart and SHAFTALIGN incorporate a range of Prüftechnik’s patented features as standard along with the latest technology in graphics and human interface. Systems are tailored to suit your needs by selecting only the features you require. If your needs change in the future and you wish to add-on, additional features are simply unlocked with a password – no time off-site!

CM SERVICES Aquip Systems provides expert ongoing condition monitoring services as well as ad-hoc machine diagnosis. We provide a range of training courses to suit all experience levels. Condition monitoring and laser shaft alignment courses focus on theoretical aspects and practical applications to suit the clients’ site requirements. We also operate the sole PRÜFTECHNIK certified service centre in Australia, and are fully equipped to carry out services, repairs and calibration checks (calichek) on all PRÜFTECHNIK equipment.

Asset Partnership

[email protected]

CM PRODUCTS Artesis MCM is a new approach to condition monitoring, providing all the benefits without the high complication and cost of traditional systems. Artesis MCM monitors the condition of equipment driven by an electric motor, effectively using the



22

FLIR Systems Australia

[email protected]/thg

FLIR Systems is the world leader in infrared cameras, having the widest range and offering the highest standard of any supplier for predictive and preventative maintenance. The FLIR range includes:• The low cost, powerful little revolutionary FLIR i3, producing snapshots of temperature differences equal to 3,600 readouts from a single spotmeter with the i5 and i7 producing even more.• The ground-breaking FLIR E-Series extends performance and affordability with features like Bluetooth® and industry-first Wi-Fi connectivity, 3.5” touchscreen and iPhone/iPad /Android using the FLIR Tools Mobile App. Add to this MeterLink, the pioneering wireless connection from FLIR, that connects your infrared camera with your ClampMeter.• The FLIR T-Series offers an optimum mix of ergonomics and flexibility and also has class leading features of touchscreen, Bluetooth® and Wi-Fi connectivity to iPhone/iPad/Android using the FLIR Tools Mobile App. The T400-Series provides advanced performance and features required by professional thermographers. Whilst the T600-Series are the best available industrial thermography systems, which take quality of image to a whole new level and have a long list of impressive features, including GPS, continuous focus and the new MSX (multi spectral imaging) feature.

motor itself as a sophisticated transducer. It requires only connection into the motor’s electrical supply, avoiding the need for specialised sensors. Because Artesis MCM is permanently installed, it provides continuous fault monitoring and does not depend on expensive manual data collection. Artesis MCM uses advanced, NASA-developed technology to provide a self-learning capability in a compact, affordable, panel-mounted instrument. It automatically teaches itself about the normal operation environment of your equipment so that it can accurately identify and diagnose faults long before they become a threat. This greatly reduces the specialist diagnostic skills required of the user, making the benefits of condition monitoring available to many groups who have considered it too difficult in the past.CM SERVICES Two services are provided: Option 1 is to purchase the Artesis MCM unit and install. We provide installation and commissioning support and training to ensure you obtain the best result from the device.

Option 2 enables a complete outsourcing of the condition monitoring of selected equipment. Under his option, the selected equipment is monitored 24/7 from our office and we provide a monthly executive summary report on the condition of your equipment. In the event a problem is identified we immediately contact the owner of the equipment with warning of the impending problem and advice upon the urgency of action together with a detailed report on the fault or impending fault condition.

22


• FLIR’s GF-Series optical gas detection cameras letting you find hydrocarbon, natural gas, carbon monoxide, refrigerant gases and SF6 leaks quickly, accurately and safely without shutting systems down for inspection.• A variety of software packages turning tools into solutions. All users of FLIR’s thermal imaging camera systems can work more efficiently and productively by utilising the most professional camera-software combinations.• New FLIR Quality infrared viewing windows.

CM SERVICESFLIR offers unsurpassed support in before and after sales service.This includes demonstrations and advice on the right camera for the application, training options, as well as rental systems and a dedicated service department.

When you buy or rent an infrared camera from FLIR, it comes fully guaranteed, and now many FLIR cameras are eligible for coverage under FLIR’s industry-leading 2-year product and 10-year detector warranties*. ( * Terms and conditions apply )At FLIR we understand that turnaround times are critical, so we have an in-house, dedicated service department offering full service, repairs and re-calibration.FLIR Systems’ certified service centre is headed by its factory trained and experienced service manager.FLIR also provides various levels of infrared training, from half day introduction courses, onsite training through to FLIR’s ITC course.The Infrared Training Center (ITC) offers the world’s leading infrared training and thermographer certification programs.

FLIR Systems Pty Ltd. 10 Business Park Drive, Notting Hill, Victoria 3168, Australia Tel AU: 1300 729 987 NZ: 0800 785 492 Email: [email protected] www.flir.com

Disclaimer: Images for illustrative purposes only. Specifications subject to change without notice. ISO No. FLIR20858

FLIR IR Windows – the safer way to avoid arc flashAs all technicians know, opening electrical cabinets to

perform IR and visual inspections of live components is

dangerous work.

Now you can put the added safety of new FLIR IR Windows

between you and potential danger by eliminating the need

for opening electrical cabinets.

Much easier to install and use than other brands, FLIR IR

Windows help you work faster with greater confidence,

perform inspections more efficiently, reduce the threat of

arc flash injury and stay within compliance regulations.

All FLIR IR Windows – compatible with all thermal cameras

– feature a secure, permanently-hinged cover that opens

easily with one hand, which means there’s nothing to

remove, drop or lose.

◊ Easy Installation

◊ PIRma-Lock™ Reliability

◊ Quick Access Hinged Cover

◊ Broadband Crystal Lens

◊ Greater Productivity and ROI

◊ Comprehensively tested

One hole to cut.Easy placement.Single PIRma-Lock™ ring nut.


23

Fluke Australia

[email protected] www.fluke.com.au

CM PRODUCTSA Fluke thermal imager can save time and money by finding potential problems before they become costly disasters. With Fluke’s NEW Ti100 Series range you can efficiently inspect an entire facility for hidden issues or monitor a thermal process frame-by-frame. Fluke’s imagers immediately make you more productive, so you spend less time finding problems and more time solving them. The revolutionary IR-OptiFlex™ focus system helps you perform industrial, electrical and mechanical inspections significantly faster than ever before. Following Fluke’s over 60-year heritage of making the world’s finest test tools, our new industrial imagers are the lightest, most rugged, easiest-to-use professional imagers on the market.Six innovations with Fluke Thermal Imagers that make your job easier:

• IR-OptiFlex™focussystemDiscover issues significantly faster with Fluke’s revolutionary, ultra-rugged focus system. The IR-OptiFlex focus system gives you optimum focus by combining focus-free ease-of-use with the flexibility of manual focus on the same camera!• IR-Fusion®technologyEnjoy the industry’s only point-and-shoot IR-Fusion camera. Fluke patented technology blends digital and infrared images into a single image to precisely document problem areas.• Ruggedone-handoperationExperience the most rugged and reliable, lightweight professional camera around. One-touch focus, laser pointer, and torch. Point-and-shoot simplicity

• Multi-modevideorecordingTroubleshoot with the industry’s only thermal imager that records focus-free video in visible light and infrared with full IR-Fusion capabilities. Easily download to PCs for video viewing and analysis.• IR-PhotoNotes™annotationsystemGet an exact reference to your problem area by capturing up to three digital photos per file

• ElectroniccompassMake sure you and others know the location of the problem. Compass readings easily appear in images and reports.

Take a vibration expert alongFluke redefines mechanical troubleshooting with it revolutionary vibration products: The Fluke 810 Vibration Tester, the most advanced troubleshooting tool for mechanical maintenance teams who need an answer NOW! Control unplanned downtime, prevent recurring problems, set repair priorities and manage your resources with an entirely new approach to vibration testing.The Fluke 810 is designed specifically for maintenance professionals who need to troubleshoot mechanical problems and quickly understand the root cause of equipment condition.Not to mention the NEW Fluke 805 Vibration Meter. Where vibration pens have tried, the Fluke 805 Vibration Meter succeeds. (May 2012 release).

• FOOLPROOF Testing instead of false alarms.• REPEATABLE Results you can trust instead of random readings.• EASY TO USE Instead of confusing indicators and menus.

CM SERVICESThermal Imaging and Troubleshooting Motors and Drives training courses run throughout the year by Fluke Australia.

23


SLIGHT SERIOUS EXTREMEMODERATE

TAKE A VIBRATION EXPERT ALONG

Fluke 810 Vibration TesterThe simple way to identify

machine problems

Finally, an easy way to check the health of your machines and get instant answers. With the Fluke 810 Vibration

Tester you can assess the level of mechanical wear in motors, water pumps,

compressors and the like without the need for historical data. The Fluke 810

simply displays the severity of the condition so you can decide if action is needed.

Click here to “SEE WHAT’S SHAKIN” within Fluke’s Vibration Solution Centre

Contact Fluke Australia today for your FREE Trial:

[email protected] +61 2 8850 3333


2424

Machinery Vibration Specialists Australia

[email protected]

CM PRODUCTSCM OverviewMVS Aust P/L is a specialist company supplying products, support services and technical training for the maintenance and repair of rotating machinery.CM ProductsSPM Instrument - AB of SwedenOriginator of the “True Shock Pulse Method” for bearing measurement & analysis.Innovator of the NEWSPMHD for low speed (1 to 20,000 rpm) bearing measurements.BearingChecker --- Low cost, pocket, bearing measurement & evaluation instrument.VibChecker ---- Low cost, pocket, vibration instrument to ISO 10816 with FFT spectrum.LeonovaInfinity ---- 2-Channel Bearing/ Vibration Analyser with Balancing, Laser Shaft Alignment, Bump Tests, Orbit & Lubrication Analysis Order Tracking and Phase Analysis.On-LineMachineMonitoringandProtectionMachine Guard -- single/multi channel with relays, Modbus, 4-20mA.Intellinova --- Up to 32 Channels SPM HD, vibration, analogue in/out.Intellinova Compact --- Units with 6, 12 &18 channels very cost effectiveUses SPM HD, vibration, analogue in, 3G interface

Mobius Institute

[email protected]

CM PRODUCTS Mobius Institute offers the self-paced, computer-based e-learning iLearn products for condition monitoring and reliability improvement. Products include iLearnVibration, iLearnAlignment, and the new iLearnBalancing. The Interpreter product can provide analysis assistance by examining the spectrum on the computer screen and identifying patterns and suggesting fault conditions. And if you have an iPhone or Android phone, look for the new Mobius iVibe application.

CM SERVICES Mobius Institute provides vibration training courses and certification examination according to ISO 18436-2. Certification is ISO/IEC 17024 accredited. Training is provided in Australia & New Zealand via the Vibration Institute of Australia but is also available in 50 countries through licensed partners. Distance learning courses are available through Mobius Institute. Mobius Institute training is unique in the world; the use of animations and simulations make the complex topics of vibration analysis, alignment and balancing easy to understand.

NoriaCorporation

[email protected] www.noria.com

CM SERVICES Noria Corporation is an unconventional publisher. In addition to publishing and providing conferences and training, Noria provides a range of services related to advanced machine reliability and maintenance technologies. The majority of our editorial staff are practicing professionals who make up the leadership of Noria’s consulting and service team. In fact, Noria’s service practice represents the largest part of our business.

All designed to monitor complex machines such as container cranes, wind generators, rolling mills, paper machines, cement plant machinery and mining conveyor and crushing systems. Especially Ultra Low Speeds (<10 rpm)

CEMB SpA - Italy

Maintenance & Process Dynamic Balancing Machines.True “Hard Bearing “ force measuring machines, horizontal & vertical.Maintenance & Production for 10Kg to 50,000Kg.IRD Balancing LLC - USA Maintenance Dynamic Balancing Machines. “Soft Bearing” motion measuring machines, horizontal Transportable, from 10Kg to 200,000Kg.Lexseco--- Motor Core Loss Testers form 10 to 300KVA.

Support Instruments.Rayhome Ltd.------ High quality pre-cut SS shims in packets of 10 or boxed kits.Hilger u. Kern GmbH ----- Laser Belt Tension Instrument & Leak Detectors.

CM SERVICES MVSSupportServices.• Instrument and machine repair and calibration to NMI standards.• SPM CM Software installation and Commissioning• Monitor and On-Line Startup Commisioning• On-site machine trouble - shooting bearing & vibration problems.• Vibration / Balancing / Alignment Training Courses.• Precision Dynamic Balancing service of rotors up to 3-5Kg.

We believe that practicing in the field about which we publish improves the quality, timeliness and usefulness of our Machinery Lubrication editorial content. We don’t just write about it – we actually do it! Noria Corporation is impacting the way people think about machinery lubrication and is the education resource of choice for numerous Fortune 500 companies.

NVMSMeasurementSystems

[email protected] www.nvms.com.auCM PRODUCTSNoise & Vibration Measurement Systems PTY Ltd (NVMS) represents only the world’s leading manufactures - Brüel & Kjær S&V, Brüel & Kjær Vibro, Hottinger Baldwin Messtechnik (HBM), Sensear, FLIR Systems – and our own world-class project engineering.Compact Vibration Monitor-VIBROCONTROL1500(VC-500)Ideal for monitoring on pumps, fans, motors, blowers,… it fills the gap between high end vibration monitoring and ordinary vibration switches. VC 1500 captures also trends casing vibrations, rolling-element bearing and temperature condition and even provides frequency information in one device. Machine protection & CM VIBROCONTROL6000(VC-6000);Offers the highest flexibility for machine protection and online condition monitoring. The latest hardware platform ensures highest channel density for hundreds of channels with the world fastest reaction time of 10ms in online machine condition monitoring. OnlineMachineCMUserinterface-COMPASS6000;Is a modern windows based user platform for comprehensive condition-based machine monitoring and diagnostic on critical machines like Turbines, Compressors, Generators,…tools like Envelope, FFT, CPB spectra, Orbit, Waterfall plotsdescribe only a few of the capabilities to detect



2525


machine failures in a very early stage. Portable Vibration Analyser - VIBROTEST60(VT-60);Is a combination of vibration Analyser, data collector and balancing device. OnlineCMinharshenvironment-VDAU-6000:This 16 channel powerful system comes in an IP65 enclosure and provides Zone II ATEX Certification. Fits perfect in hazard areas as required as on mine sides and offshore platforms. The installation can be carryout close to the rotating equipment. Machine data can be transfers wireless / hardwired into a server.Alarming and diagnostic capabilities helps to plan maintenance ahead.SENSORS and Accessories: for the various diagnostic & monitoring tasks we have over 1000 products available including a large range of transducers, accelerometers, velocity/displacement sensors and probes. Equipment for structural durability, stress analysis andtesting:HBM’s product range covers strain gauges, torque, pressure, load cells transducers, amplifiers and rugged data acquisition systems as well as software for structural durability investigations, tests and analysis. Thermalimagingcameras–Flir:Detect problems on bearings, electrical circuits, fuses…with the world leaders in thermal imaging.

CM SERVICES NVMS has developed it’s service and project support reputation through a close partnerships with our valued clients and suppliers. Each customer has unique requirements, so the “one size fits all” product/service concept simply doesn’t apply to plant-wide monitoring applications.

We provide extensive “full circle” service and support packages that closely match the specific requirements of a wide range of industries and machines, and these can be easily fine-tuned to the customer’s specific application.• Instrumentation for machine protection and condition based monitoring• Support and implementation of predictive maintenance strategies• Engineering and Design• Project management• Performance monitoring• Installation and commissioning• Test and Measurements solutions for structure Analysis and durability• Service and products in all industries Power/Oil & Gas/Mining/Wind/Solar power• Industry recognised training courses tailored to your requirements in our own training facility in Perth. • NATA accredited calibration lab

SIRF Roundtables

[email protected] www.sirfrt.com.au

CM SERVICESSIRF Roundtables facilitates regional shared learning networks across Australia and New Zealand for organisations seeking best business performance.Membership groups include: Industrial Maintenance Roundtable (IMRt), Manufacturing Excellence Roundtable (MERt), Knowledge Management Roundtable (KMRt) and Sustainability Roundtable (SARt).

Services related to condition monitoring include:• Facilitates the sharing of Condition Monitoring best practice between IMRt/ MERt members• Coordinates the annual Condition Monitoring and Lubrication forum 15 to 16 October in Sydney sirfrt.com.au/cmlnf• Training on Management and Operation of CM & Inspection systems for non-specialists• Training on Basic Condition Monitoring for non-specialists• Carrying out Predictive Maintenance Strategy ReviewsSIRF Roundtables annually runs a National Forum on Condition Monitoring and Lubrication. It is an opportunity to listen to leading industry practitioners on techniques and proven strategies they use in their operation.Attendees learn from the presentations & discussion groups and are able to take back tips and ideas and adapt into their own environment.The forum provides not only a learning platform but also many networking opportunities amongst delegates with similar roles and challenges so people can learn from one another.

SKF Australia

[email protected]/reliability

CM PRODUCTSSKF is the leading supplier of condition monitoring and maintenance diagnostic systems, hardware and software that enables us to monitor operations and identify problems both mechanical and electrical faults. 1. Basic Condition MonitoringSKF Basic condition monitoring kits combine instruments to enable a “multi-parameter” approach to monitoring that includes vibration, oil condition,

temperature, speed, and more to help ensure the accurate and reliable assessment of machine condition.2. Portable data-collectors/Analyzers for Condition MonitoringSKF offers a wide variety of portable data collectors/analyzers including data collection, machinery vibration analysis and monitoring, early detection of bearing defects or gear tooth wear, electric motor monitoring and field machinery balancing. Easy menu selection and control enable the user to quickly and efficiently perform a wide variety of operations.3. Online Surveillance condition monitoring systemsSKF’s On-line surveillance systems complement the use of periodic data collection instruments, facilitating a round-the-clock monitoring of machinery that collects data 24 hours per day, 7 days per week from permanently installed sensors.4. On-Line Machinery Protection SystemsSKF Condition Monitoring offers a spectrum of machinery protection and monitoring solutions backed by decades of experience and global support that includes monitoring, protection, analysis and diagnosis of critical machinery.5. Baker Motor Testing and Diagnostic Systems:SKF acquired Baker Instruments in June 2007. Baker Instruments Company is dedicated in developing and manufacturing motor reliability tools that offer a broad spectrum of capabilities. Dynamic (on-line) monitoring combined with comprehensive static testing (offline), enhances motor condition awareness including efficiency and performance information.6. Measurement and Laser alignment Systems:SKF is an exclusive distributor for Easy-Laser, precision laser alignment system for industrial applications. SKF also offers a suite of other complimentary products such as Online and Offline Thermography systems, Ultrasonic Inspection kits, low cost vibration sensors etc.


2626


CM SERVICES

SKF RELIABILITY SYSTEMSSKF offers Asset Efficiency optimization (AEO), a management process designed to achieve maximum efficiency and effectiveness from work management activities focused on business goals, increasing profitability

1. SKF Energy and Sustainability Management (ESM)This program provides benefits to a customer by establishing an “opportunity map” of potential savings and improved practices, including potential areas for:• Reducing energy consumption• Improving poorly operating energy intensive systems• Improving facility economic performance• Improving facility environmental performance

2. Maintenance Strategy.SKF can assist in developing and implementing maintenance strategies using the following commonly applied techniques:• RCM: Reliability Centered Maintenance:• SRCM®: Streamlined Reliability Centered Maintenance:• RBM: Risk Based Maintenance3. Work identification.For increasing plant reliability SKF recommends following processes/programs to identify appropriate maintenance tasks:• Operator Driven Reliability (ODR):• SKF Predictive maintenance (PdM)• SKF Proactive Reliability Maintenance (PRM)• Motor testing and diagnostics service4. Work Execution.SKF can assist by providing project management, supervision, and inspection, mechanical installation

FixturlaserLeaders in laser shaft alignment and specialist measurement solutions. • XA - Shaft alignment system• PAT - pulley alignment tool• Dirigo - entry level alignment systems• OL2R - dynamic movement measurement system• Roll and Geometric alignment systems

Vibro-Meter CM SystemsVibro-Meter provides advanced and highly reliable sensing, protection and condition monitoring systems for thousands of high capital rotating machines worldwide. Superior quality sensors for harsh environments as well as high performance condition monitoring systems and software. Vibro-Meter’s VM600 platform integrates all protection, condition and performance monitoring functions in a single system.Wilcoxon ResearchFor over 40-years manufacturers of accelerometers, vibration sensors, and accessories for industrial condition based monitoring (CBM) applications.• Industrial accelerometers, cables and terminations solutions• 4-20mA loop powered Transducers• Signal Conditioners• LifeTime Warranty available

SDT Ultrasound Systems Portable ultrasound instruments designed for predictive maintenance.Mobius - iLearn InteractiveInnovative and interactive computer-based vibration and shaft alignment training products, vibration analysis tools and vibration certification courses.

• iLearn Vibration• iLearn Alignment • Distance Learning

FLIR SystemsThe global leader in Infrared Cameras, offer a wide range of low cost, innovative and high end Infrared

skills where customers do not have either the tools or specialized knowledge in these tasks.1.Applicationknowledge: SKF has extensive application knowledge through branch offices around Australia, as well as the industrial specialists to draw on to solve customer problems with regards to rotating equipments.2.ReliabilityTraining: SKF engineers are on hand to provide specialist knowledge and training for our customers. We have offices both globally and locally, as one of largest global suppliers of condition monitoring/ reliability services.

Vitech Reliability [email protected] www.vitechreliability.com

Vitech Reliability has been providing a specialist approach to condition monitoring and reliability based technologies in Australia since 1994. We service Australia, New Zealand and South East Asia with offices in Perth, Melbourne and Brisbane.Vitech Reliability provides accurate, durable and cost effective solutions designed to ensure customers improve overall reliability and productivity.

CM PRODUCTS CommtestDevelopers of the revolutionary:• Vb Series portable data collectors, analysers and balancing systems. • Vb Online multi-channel plant surveillance systems.• Ascent analysis / data management software.

Cameras for Predictive and Preventative Maintenance. These include: • InfraCam and InfraCam SD – Low cost portable infrared cameras Beran InstrumentsManufacturers of online and portable turbine diagnostic and monitoring solutions.• 767 - 32-ch portable multi-channel diagnostic and motoring system• 766 - 32-ch on-line multi-channel diagnostic and motoring systemEndevcoWorld leaders in extreme vibration and pressure sensing technologies.• Extreme temperature industrial accelerometers• Precision pressure transducers• Test & measurement accelerometersPDMAElectric motor and generator testing systems / asset management.• MCE – Offline motor testing• Emax – Online motor testing• MCEmax – Combined testerArtesisOnline motor condition monitoring systems• MCM Online motor monitors• MCM Scada motor management softwareBaseline SeriesVibration tools and termination products. • BLS-UVLA vibration listening amplifier for data collectors or stand alone stethoscope use. • BLS-TB series accelerometer termination boxes• Assorted accelerometer mounting hardware.

CM SERVICES Vitech Asia Pacific provides the following service:• Product, VA and Alignment Training (class room & customised on site)• Installation & Commissioning of systems

Documents

MCM