Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
2015 Microchip Technology Inc. DS50002414A
MCP25625PICtail™ Plus
Daughter BoardUser’s Guide
DS50002414A-page 2 2015 Microchip Technology Inc.
Information contained in this publication regarding deviceapplications and the like is provided only for your convenienceand may be superseded by updates. It is your responsibility toensure that your application meets with your specifications.MICROCHIP MAKES NO REPRESENTATIONS ORWARRANTIES OF ANY KIND WHETHER EXPRESS ORIMPLIED, WRITTEN OR ORAL, STATUTORY OROTHERWISE, RELATED TO THE INFORMATION,INCLUDING BUT NOT LIMITED TO ITS CONDITION,QUALITY, PERFORMANCE, MERCHANTABILITY ORFITNESS FOR PURPOSE. Microchip disclaims all liabilityarising from this information and its use. Use of Microchipdevices in life support and/or safety applications is entirely atthe buyer’s risk, and the buyer agrees to defend, indemnify andhold harmless Microchip from any and all damages, claims,suits, or expenses resulting from such use. No licenses areconveyed, implicitly or otherwise, under any Microchipintellectual property rights unless otherwise stated.
Note the following details of the code protection feature on Microchip devices:• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of ourproducts. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such actsallow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.
QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV
== ISO/TS 16949 ==
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, flexPWR, JukeBlox, KEELOQ, KEELOQ logo, Kleer, LANCheck, MediaLB, MOST, MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo, RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
The Embedded Control Solutions Company and mTouch are registered trademarks of Microchip Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, KleerNet logo, MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan, WiperLock, Wireless DNA, and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology Germany II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in other countries.
All other trademarks mentioned herein are property of their respective companies.
© 2015, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.
ISBN: 978-1-63277-873-4
2015 Microchip Technology Inc. DS50002414A-page 3
Object of Declaration: MCP25625 PICtail™ Plus Daughter Board
MCP25625 PICTAIL™ PLUSDAUGHTER BOARD
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5Introduction............................................................................................................ 5Document Layout .................................................................................................. 5Conventions Used in this Guide ............................................................................ 6Recommended Reading........................................................................................ 7The Microchip Web Site ........................................................................................ 7Customer Support ................................................................................................. 7Document Revision History ................................................................................... 8
Chapter 1. Product Overview1.1 Overview ........................................................................................................ 91.2 What is the MCP25625 PICtail Plus Daughter Board? .................................. 91.3 What the MCP25625 PICtail Plus Daughter Board kit includes ..................... 9
Chapter 2. Installation and Operation2.1 Hardware Overview ...................................................................................... 112.2 Jumper settings ............................................................................................ 112.3 Connecting the Board ................................................................................... 122.4 Operation ...................................................................................................... 13
Appendix A. Schematic and LayoutsA.1 Introduction .................................................................................................. 15A.2 Board – Schematic ....................................................................................... 16A.3 Board – Top Silk .......................................................................................... 17A.4 Board – Top Copper and Silk ....................................................................... 17A.5 Board – Top Copper .................................................................................... 18A.6 Board – Bottom Copper ............................................................................... 18A.7 Board – Bottom Copper and Silk ................................................................. 19A.8 Board – Bottom Silk ..................................................................................... 19
Appendix B. Bill Of Materials (BOM)Worldwide Sales and Service .................................................................................... 22
DS50002414A-page 4 2015 Microchip Technology Inc.
MCP25625 PICTAIL™ PLUSDAUGHTER BOARD
USER’S GUIDE
Preface
INTRODUCTIONThis chapter contains general information that will be useful to know before using the MCP25625 PICtail™ Plus Daughter Board. Items discussed in this chapter include:• Document Layout• Conventions Used in this Guide• Recommended Reading• The Microchip Web Site• Customer Support• Document Revision History
DOCUMENT LAYOUTThis document describes how to use the MCP25625 PICtail Plus Daughter Board. The manual layout is as follows:• Chapter 1. “Product Overview” – Important information about the MCP25625
PICtail Plus Daughter Board.• Chapter 2. “Installation and Operation” – This chapter includes a detailed
description of each function of the demo board and instructions for how to begin using the board.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout diagrams for the MCP25625 PICtail Plus Daughter Board.
• Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the MCP25625 PICtail Plus Daughter Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is “DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level of the document.
2015 Microchip Technology Inc. DS50002414A-page 5
MCP25625 PICtail™ Plus Daughter Board User’s Guide
CONVENTIONS USED IN THIS GUIDEThis manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONSDescription Represents Examples
Arial font:Italic characters Referenced books MPLAB® IDE User’s Guide
Emphasized text ...is the only compiler...Initial caps A window the Output window
A dialog the Settings dialogA menu selection select Enable Programmer
Quotes A field name in a window or dialog
“Save project before build”
Underlined, italic text with right angle bracket
A menu path File>Save
Bold characters A dialog button Click OKA tab Click the Power tab
N‘Rnnnn A number in verilog format, where N is the total number of digits, R is the radix and n is a digit.
4‘b0010, 2‘hF1
Text in angle brackets < > A key on the keyboard Press , Courier New font:Plain Courier New Sample source code #define START
Filenames autoexec.batFile paths c:\mcc18\hKeywords _asm, _endasm, staticCommand-line options -Opa+, -Opa-Bit values 0, 1Constants 0xFF, ‘A’
Italic Courier New A variable argument file.o, where file can be any valid filename
Square brackets [ ] Optional arguments mcc18 [options] file [options]
Ellipses... Replaces repeated text var_name [, var_name...]
Represents code supplied by user
void main (void){ ...}
DS50002414A-page 6 2015 Microchip Technology Inc.
Preface
RECOMMENDED READINGThis user's guide describes how to use the MCP25625 PICtail Plus Daughter Board. The following Microchip documents are available and recommended as supplemental reference resources:• MCP25625 Data Sheet – “CAN Controller with Integrated Transceiver”
(DS20005282)This data sheet provides detailed information regarding the MCP25625 Product Family.• Explorer 16 User’s Guide –“Explorer 16 Development Board User’s Guide”
(DS50001589)This user’s guide provides detailed information regarding the Explorer 16 Development Board and its functionality.• PICkit™ Serial Analyzer User’s Guide – “PICkit™ Serial Analyzer User’s
Guide” (DS51647)This user’s guide provides detailed information regarding PICkit Serial Analyzer functionality.
THE MICROCHIP WEB SITEMicrochip provides online support via our web site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information:• Product Support – Data sheets and errata, application notes and sample
programs, design resources, user’s guides and hardware support documents, latest software releases and archived software
• General Technical Support – Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing
• Business of Microchip – Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives
CUSTOMER SUPPORTUsers of Microchip products can receive assistance through several channels:• Distributor or Representative• Local Sales Office• Field Application Engineer (FAE)• Technical Support• Development Systems Information LineCustomers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. Technical support is available through the web site at: http://www.microchip.com/support.
2015 Microchip Technology Inc. DS50002414A-page 7
http://www.microchip.com/supportwww.microchip.com
MCP25625 PICtail™ Plus Daughter Board User’s Guide
DOCUMENT REVISION HISTORY
Revision A (October 2015)• Initial release of this document.
DS50002414A-page 8 2015 Microchip Technology Inc.
MCP25625 PICTAIL™ PLUSDAUGHTER BOARD
USER’S GUIDE
Chapter 1. Product Overview
1.1 OVERVIEWThis chapter provides an overview of the MCP25625 PICtail Plus Daughter Board and covers the following topics:• Overview• What is the MCP25625 PICtail Plus Daughter Board?• What the MCP25625 PICtail Plus Daughter Board kit includes.
1.2 WHAT IS THE MCP25625 PICTAIL PLUS DAUGHTER BOARD?The MCP25625 PICtail Plus Daughter Board is a simple Controller Area Network (CAN) board designed to be used with boards containing the PICtail Plus connector. The board also has the PICkit Serial connector for interfacing to the PICkit Serial Analyzer tool.The single-chip solution CAN node consists of the MCP25625 CAN Controller with Integrated Transceiver. The PICkit Plus and PICkit Serial connectors allow the board to be interfaced to a variety of PIC® microcontrollers so that the user can develop a CAN node.The board also contains headers or test points for most of the MCP25625 pins to allow the external functions to be monitored/evaluated. Additionally, there are multiple exter-nal components and jumper configurations for added flexibility.
FIGURE 1-1: MCP25625 PICTAIL™ PLUS DAUGHTER BOARD
1.3 WHAT THE MCP25625 PICTAIL PLUS DAUGHTER BOARD KIT INCLUDESThe MCP25625 PICtail Plus Daughter Board kit includes:• MCP25625 PICtail Plus Daughter Board (02-10350)• Information Sheet
2015 Microchip Technology Inc. DS50002414A-page 9
MCP25625 PICtail™ Plus Daughter Board User’s Guide
NOTES:
DS50002414A-page 10 2015 Microchip Technology Inc.
MCP25625 PICTAIL™ PLUSDAUGHTER BOARD
USER’S GUIDE
Chapter 2. Installation and Operation
2.1 HARDWARE OVERVIEWThe MCP25625 PICtail Plus Daughter Board can be connected to either a PIC micro-controller or a development board with the PICkit Plus connector or the PICkit Serial connector. Figure 2-1 below shows the connections to the Explorer 16 Development Board (DM240001).
2.2 JUMPER SETTINGSTable 2-1 briefly describes the functions of all the board's jumpers.
TABLE 2-1: JUMPER DESCRIPTIONSIndex Description
JP1 • Drives the STBY pin of the transceiver to GND manually or via the Explorer 16 demo board when used as PICTail™ daughter board (plugged into the Explorer 16).
• Short-circuit pins 1 and 2 (top and middle) to connect to GND, or pins 2 and 3 (middle and bottom) to connect to the Explorer 16.
Default configuration: pins 1 and 2 (top and middle) short-circuited.JP2 • Powers-up the CAN Controller with 5V or 3.3V. It also feeds the VIO of
the transceiver; this voltage is determined by the MCU that the user implements (5V or 3.3V).
• Short-circuit pins 1 and 2 (left-hand side) to select 5V, or pins 2 and 3 (right-hand side) to select 3.3V.
Default configuration selects 5V operation mode.JP3(1) When disconnected, separates the RXD of the transceiver from the RXCAN of the
controller. JP4(1) When disconnected, separates the TXD of the transceiver from the TXCAN of the
controller. JP5(1) When connected, enables access to the 9V supply from the Explorer 16.JP6(1) When connected, implements a capacitor with the jumper JP7 enabled 120Ω
termination resistor. JP7(1) When connected, implements the 120Ω termination resistor.
Note 1: Jumpers JP3, JP4, JP5, JP6 and JP7 are not populated, however, they are short-circuited on the bottom layer (back) of the board. The traces can be cut in order to disconnect them.
2015 Microchip Technology Inc. DS50002414A-page 11
MCP25625 PICtail™ Plus Daughter Board User’s Guide
Figure 2-1 indicates the default settings for the jumpers.
FIGURE 2-1: DEFAULT JUMPER CONFIGURATIONS
2.3 CONNECTING THE BOARD
FIGURE 2-2: HARDWARE OVERVIEW
Legend:= pins connected with jumper header
= jumper short circuited on bottom layer (back side) of the board
MC
P25625 PICtail™
Plus
Explorer 16 Board (DM240001)
PICkit™ Serial Header
DS50002414A-page 12 2015 Microchip Technology Inc.
2.4 OPERATIONThe user can write firmware for the MCP25625 PICtail Plus Daughter Board in order to create a custom CAN node. Check the Explorer 16 and PICkit Serial Analyzer web pages for the latest firmware and/or software supporting the MCP25625 or general SPI interfaces.
2015 Microchip Technology Inc. DS50002414A-page 13
MCP25625 PICtail™ Plus Daughter Board User’s Guide
NOTES:
DS50002414A-page 14 2015 Microchip Technology Inc.
MCP25625 PICTAIL™ PLUSDAUGHTER BOARD
USER’S GUIDE
Appendix A. Schematic and Layouts
A.1 INTRODUCTIONThis appendix contains the following schematics and layouts for the MCP25625 PICtail Plus Daughter Board:• Board – Schematic• Board – Top Silk• Board – Top Copper and Silk• Board – Top Copper• Board – Bottom Copper• Board – Bottom Copper and Silk• Board – Bottom Silk
2015 Microchip Technology Inc. DS50002414A-page 15
MC
P25625 PICtail™
Plus Daughter B
oard User’s G
uide
DS
50002414A-page 16
2015 M
icrochip Technology Inc.
GND
GND
D protection
GND
GND
GND
TXCAN/TXDRXCAN/RXD
CLKOUTRX1BFRX0BF
RE8/NINT
RB5/AN5/NCS
RF7/MISORF6/SCK
RF8/MOSIGND
VDD
+9V
2
1
3
4
J4
GND
VDD
TSTSTS
47 pF200V0805
C8
47 pF200V0805
C10
10k08051%
R110k08051%
R210k08051%
R3
12
34
56
78
910 H
DR
-2.5
4 M
ale
1x10
J1
123456
HD
R-2
.54
Mal
e 1x
6J3
1 2
HDR-2.54 Male 1x2JP5
1
2
3
4
5
6
7
8
9 DE-9 MaleJ5
GND
0.1 uF25V0805
C15
GND
1CANH
1
CANL
andle
A.2 BOARD – SCHEMATIC
RF6/SCKRF8/MOSI
RB5/AN5/NCS
RF7/MISO
RE8/NINT
VDD
GND
VDD
GND
GND
GND
GND
Optional ES
GND
GND
GND GND
GND
GND
RF6/SCKRF7/MISO
RF8/MOSI
RB5/AN5/NCS
RE8/NINT
GND
TXCAN/TXDRXCAN/RXD
CLKOUT
RX1BFRX0BF
+3.3V +5V +9V+3.3V+5V+9V
+3.3V +5V +9V+3.3V+5V+9V
+3.3V +3.3V
VDD
+5V+3.3V
+5V
GND
VDD
VDD VDD
GND
GND GND
STBY
RB6/STBY
STBY
GND
RB6/STBY
GND
NTX2RNTX1RNTX0R
NTX0RTSNTX1RTS
NTX2RTS
GND
GND
GND
10 uF6.3V0805
C14
10 uF6.3V0805
C10.1 uF25V0805
C2
0.1 uF25V0805
C7
0.1 uF25V0805
C110.1 uF25V0805
C120.1 uF25V0805
C13
4700 pF100V0805
C9
470R08051%
R4470R08051%
R5
10k08051%
R6
60.4R12061%
R8
60.4R12061%
R9
12
3
HDR-2.54 Male 1x3
JP1
1 2 3
HDR-2.54 Male 1x3JP2
12
JP7
RST
SW1
1GNDTP4
1 GNDTP5
1
GND
TP61
GND
TP71
VDD
1 +3.3V
1+5V
2
31
20 MHz
X1
1 23
21 2223 2425 2627 2829 30
33 3435 3637 3839 4041 4243 4445 4647 4849 5051 5253 5455 5657 5859 6061 62
65 6667 6869 7071 7273 7475 7677 7879 8081 8283 8485 8687 8889 9091 9293 9495 9697 9899 100
101 102103 104105 106107 108109 110111 112113 114115 116117 118119 120
45 67 89 10
11 1213 1415 1617 1819 20
EDGE 80P Male
J2
12JP3 12 JP4
12 JP6
REDTXD
REDRXD
REDINT
470R08051%
R7
1
23
MM
BZ
27V
CL
T1GD3
1
23
MM
BZ
27V
CL
T1GD4
SJ61A11
PAD1
SJ61A11
PAD2
SJ61A11
PAD3
SJ61A11
PAD4
Shunt 2.54 mm 1x2 H
JP1_shunt
Shunt 2.54 mm 1x2 Handle
JP2_shunt
CS1
RESET2
VDD3
TxCAN 4RxCAN5
CLKOUT 6
Tx0RTS7
Tx1RTS8
Tx2RTS9
RxD10
VIO11
CANL 12
CANH 13
NC 14
STBY15
TxD 16
NC 17
VSS 18
VDDA19
OSC220
OSC121
GND 22
Rx1BF 23Rx0BF 24
INT 25
SCK26
SI27
SO28
EP 29
MCP25625
U2
A.3 BOARD – TOP SILK
A.4 BOARD – TOP COPPER AND SILK
2015 Microchip Technology Inc. DS50002414A-page 17
MCP25625 PICtail™ Plus Daughter Board User’s Guide
A.5 BOARD – TOP COPPER
A.6 BOARD – BOTTOM COPPER
DS50002414A-page 18 2015 Microchip Technology Inc.
A.7 BOARD – BOTTOM COPPER AND SILK
A.8 BOARD – BOTTOM SILK
2015 Microchip Technology Inc. DS50002414A-page 19
MCP25625 PICtail™ Plus Daughter Board User’s Guide
NOTES:
DS50002414A-page 20 2015 Microchip Technology Inc.
MCP25625 PICTAIL™ PLUSDAUGHTER BOARD
USER’S GUIDE
Appendix B. Bill Of Materials (BOM)
TABLE B-1: BILL OF MATERIALSQty. Reference Description Manufacturer Part Number
9 +3.3V, +5V, CANH, CANL, TP4, TP5, TP6, TP7, VDD
Conn. TP Loop Tin SMD Harwin Plc. S1751-46R
2 C1, C14 Cap. ceramic 10 µF 6.3V 10% X5R SMD 0805 KEMET® C0805C106K9PACTU6 C2, C7, C11,
C12, C13, C15Cap. ceramic 0.1 µF 25V 10% X7R SMD 0805 Murata Electronics® GRM21BR71E104KA01L
2 C8, C10 Cap. ceramic 47 pF 200V 5% C0G, NP0 SMD 0805
KEMET C0805C470J2GACTU
1 C9 Cap. ceramic 4700 pF 100V 10% X7R SMD 0805
TDK Corporation C2012X7R2A472K
2 D3, D4 Diode TVS MMBZ27VCLT1G 22V 40W SOT-23-3
ON Semiconductor® MMBZ27VCLT1G
3 INT, RXD, TXD Diode LED red 1.7V 20 mA 11.7mcd Diffuse SMD 0805
CML Technologies GmbH & Co. KG
7012X1
1 J1 Conn. header-2.54 male 1x10 Gold 5.84MH TH vert.
Samtec, Inc. TSW-110-07-L-S
1 J3 Conn. header-2.54 male 1x6 Tin 5.84MH TH vert.
Sullins Connector Solutions
PEC06SAAN
1 J5 Conn. DSUB DE-9 male TH R/A FCI 10090097-P094VLF2 JP1, JP2 Conn. header-2.54 male 1x3 Tin 5.84MH TH
vert.Samtec, Inc. TSW-103-07-T-S
2 JP1_shunt, JP2_shunt
Mech. HW Jumper 2.54 mm 1x2 Handle Gold TE Connectivity 881545-2
5 JP3, JP4, JP5, JP6, JP7
Conn. header-2.54 male 1x2 Tin 6.10MH TH vert.
Molex® 0022284020
4 PAD1, PAD2, PAD3, PAD4
Mech. HW Rubber pad Cylindrical D7.9 H5.3 black
3M SJ61A11
1 PCB RoHS Compliant Bare PCB,MCP25625 PICtail™ Plus Daughter Board
Microchip Technology Inc.
104-10350
4 R1, R2, R3, R6 Res. TKF 10 kΩ 1% 1/8W SMD 0805 Panasonic® – ECG ERJ-6ENF1002V3 R4, R5, R7 Res. TKF 470R 1% 1/16W SMD 0805 Stackpole
Electronics, Inc.RMCF0805FT470R
2 R8, R9 Res. TKF 60.4R 1% 1/4W SMD 1206 Yageo Corporation RC1206FR-0760R4L1 SW1 Switch Tact. SPST 32V 50 mA KSR231GLFS
SMDC&K Components KSR231GLFS
1 U2 MCHP Interface CAN MCP25625-E/ML QFN-28 Microchip Technology Inc.
MCP25625T-E/SO
1 X1 Resonator 20M Hz 0.1% SMD CSTCE Murata Electronics CSTCE20M0V13L99-R0
Note: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM used in manufacturing uses all RoHS-compliant components.
2015 Microchip Technology Inc. DS50002414A-page 21
DS50002414A-page 22 2015 Microchip Technology Inc.
AMERICASCorporate Office2355 West Chandler Blvd.Chandler, AZ 85224-6199Tel: 480-792-7200 Fax: 480-792-7277Technical Support: http://www.microchip.com/supportWeb Address: www.microchip.comAtlantaDuluth, GA Tel: 678-957-9614 Fax: 678-957-1455Austin, TXTel: 512-257-3370 BostonWestborough, MA Tel: 774-760-0087 Fax: 774-760-0088ChicagoItasca, IL Tel: 630-285-0071 Fax: 630-285-0075ClevelandIndependence, OH Tel: 216-447-0464 Fax: 216-447-0643DallasAddison, TX Tel: 972-818-7423 Fax: 972-818-2924DetroitNovi, MI Tel: 248-848-4000Houston, TX Tel: 281-894-5983IndianapolisNoblesville, IN Tel: 317-773-8323Fax: 317-773-5453Los AngelesMission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608New York, NY Tel: 631-435-6000San Jose, CA Tel: 408-735-9110Canada - TorontoTel: 905-673-0699 Fax: 905-673-6509
ASIA/PACIFICAsia Pacific OfficeSuites 3707-14, 37th FloorTower 6, The GatewayHarbour City, KowloonHong KongTel: 852-2943-5100Fax: 852-2401-3431Australia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755China - BeijingTel: 86-10-8569-7000 Fax: 86-10-8528-2104China - ChengduTel: 86-28-8665-5511Fax: 86-28-8665-7889China - ChongqingTel: 86-23-8980-9588Fax: 86-23-8980-9500China - DongguanTel: 86-769-8702-9880 China - HangzhouTel: 86-571-8792-8115 Fax: 86-571-8792-8116China - Hong Kong SARTel: 852-2943-5100 Fax: 852-2401-3431China - NanjingTel: 86-25-8473-2460Fax: 86-25-8473-2470China - QingdaoTel: 86-532-8502-7355Fax: 86-532-8502-7205China - ShanghaiTel: 86-21-5407-5533 Fax: 86-21-5407-5066China - ShenyangTel: 86-24-2334-2829Fax: 86-24-2334-2393China - ShenzhenTel: 86-755-8864-2200 Fax: 86-755-8203-1760China - WuhanTel: 86-27-5980-5300Fax: 86-27-5980-5118China - XianTel: 86-29-8833-7252Fax: 86-29-8833-7256
ASIA/PACIFICChina - XiamenTel: 86-592-2388138 Fax: 86-592-2388130China - ZhuhaiTel: 86-756-3210040 Fax: 86-756-3210049India - BangaloreTel: 91-80-3090-4444 Fax: 91-80-3090-4123India - New DelhiTel: 91-11-4160-8631Fax: 91-11-4160-8632India - PuneTel: 91-20-3019-1500Japan - OsakaTel: 81-6-6152-7160 Fax: 81-6-6152-9310Japan - TokyoTel: 81-3-6880- 3770 Fax: 81-3-6880-3771Korea - DaeguTel: 82-53-744-4301Fax: 82-53-744-4302Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or 82-2-558-5934Malaysia - Kuala LumpurTel: 60-3-6201-9857Fax: 60-3-6201-9859Malaysia - PenangTel: 60-4-227-8870Fax: 60-4-227-4068Philippines - ManilaTel: 63-2-634-9065Fax: 63-2-634-9069SingaporeTel: 65-6334-8870Fax: 65-6334-8850Taiwan - Hsin ChuTel: 886-3-5778-366Fax: 886-3-5770-955Taiwan - KaohsiungTel: 886-7-213-7828Taiwan - TaipeiTel: 886-2-2508-8600 Fax: 886-2-2508-0102Thailand - BangkokTel: 66-2-694-1351Fax: 66-2-694-1350
EUROPEAustria - WelsTel: 43-7242-2244-39Fax: 43-7242-2244-393Denmark - CopenhagenTel: 45-4450-2828 Fax: 45-4485-2829France - ParisTel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79Germany - DusseldorfTel: 49-2129-3766400Germany - KarlsruheTel: 49-721-625370Germany - MunichTel: 49-89-627-144-0 Fax: 49-89-627-144-44Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781Italy - VeniceTel: 39-049-7625286 Netherlands - DrunenTel: 31-416-690399 Fax: 31-416-690340Poland - WarsawTel: 48-22-3325737 Spain - MadridTel: 34-91-708-08-90Fax: 34-91-708-08-91Sweden - StockholmTel: 46-8-5090-4654UK - WokinghamTel: 44-118-921-5800Fax: 44-118-921-5820
Worldwide Sales and Service
07/14/15
http://support.microchip.comhttp://www.microchip.com
TrademarksDeclaration of Conformity LetterTable of ContentsPrefaceIntroductionDocument LayoutConventions Used in this GuideRecommended ReadingThe Microchip Web SiteCustomer SupportDocument Revision History
Chapter 1. Product Overview1.1 Overview1.2 What is the MCP25625 PICtail Plus Daughter Board?Figure 1-1: MCP25625 PICtail™ Plus Daughter Board
1.3 What the MCP25625 PICtail Plus Daughter Board kit includes
Chapter 2. Installation and Operation2.1 Hardware Overview2.2 Jumper settingsTable 2-1: Jumper DescriptionsFigure 2-1: Default Jumper Configurations
2.3 Connecting the BoardFigure 2-2: Hardware Overview
2.4 Operation
Appendix A. Schematic and LayoutsA.1 IntroductionA.2 Board – SchematicA.3 Board – Top SilkA.4 Board – Top Copper and SilkA.5 Board – Top CopperA.6 Board – Bottom CopperA.7 Board – Bottom Copper and SilkA.8 Board – Bottom Silk
Appendix B. Bill Of Materials (BOM)Table B-1: Bill of Materials
Worldwide Sales and Service