Measuring systems. - d3is8fue1tbsks.cloudfront.netd3is8fue1tbsks.cloudfront.net/PDF/Hilti/Hilti PR 26.pdf · PR 35 rotating laser. Page 38 ... Measuring systems. | T 131 292. Measuring

Measuring systems.

Hilti. Outperform. Outlast.

2

23www.hilti.com.au | T 131 292

Measuring systems

02 Measuring systems

Range meters

Line, point and combi lasers

Rotating lasers

Location and detection systems

PD 4 laser range meter Page 26PD 40 laser range meter Page 27PD 42 laser range meter Page 28

Accessories Page 29

PMP 34 point laser Page 30PMP 45 point laser Page 31PML 32-R line laser Page 32

PMC 46 combi laser Page 33Accessories Page 34-35

PRE 3 rotating laser Page 36PR 25 IF rotating laser Page 37

PR 35 rotating laser Page 38PRI 2 rotating laser Page 39

PR 26 rotating laser Page 40Accessories Page 41-43

PX 10 transpointer Page 44Accessories Page 45

PS 35 rebar detector Page 46PS 200 ferroscan Page 47

24 www.hilti.com.au | T 131 29202 Measuring systems

Measuring systems

llllllllllll

Only with laser receiver

Working range

Measuring tools 10 30 50 100 m 200 m 300 m Applications

PD 42With target plate

With target plate

PMP 34

With laser receiver

* radius distance

*

PR 35 (New)

Distance measuringHorizontal alignment

Vertical alignment and plumb

90° layout

Slope

Indo

orO

utdo

or

Rot

atin

g la

sers

Lase

r ra

nge

met

ers

PMC 46With laser receiver

PD 40

PRE 3

l Optimal use¢ Possible use

PD 470 m

PML 32-RWith laser receiver

*

With laser receiver*

PRI 2


PR 26


PR 25 IF

Mul

tidire

ctio

nal l

aser

s

PMP 45 (New)

¢¢llllllll¢¢

2


Measuring systems


PX 10Localise 1.35 m0,05 m

PS 200Detection 160 mm0 m

Locate start and exit points for drilling and coring

Rebar detection and analysis

Det

ectio

n /

Loca

lise

PS 35Localise 120 mm0 m Locate rebars and

non-ferrous objects before drilling

80 mmRebars Non-ferrous objects

Hilti Laser repair facility andCalibration Service■ In order to ensure reliability in accordance with standards and

statutory requirements, Hilti recommends that laser measuring and detection tools are checked regularly. In normal use, measuring tools should be checked annually.

■ TheHiltiCalibrationServiceprovidesconfirmationthatthetooltestedisinconformancewiththespecificationsgiveninitsoperatinginstructions.

■ Hiltiprovidesverificationofcalibrationbyapplyingalabeltoeachtool tested.

■ WrittenconfirmationofaccuracycanalsobeprovidedbyHiltiatthetime of calibration of the measuring tool. This may be required to comply with ISO 9001.

Hilti now offers an in-house repair facility for all Hilti measuring and detection tools:

■ PD laser range meters

■ PM multi-directional lasers (point, line and combi lasers)

■ PR rotating lasers

■ PX locators

■ PS detectors

Detection

Location and detection tools Working range Applications


Measuring systems

Laser range meterPD 4

Applications n Measuring distances between 0.2m and 70m with great accuracy n Measuring quickly and safely in places where access is difficult

Ordering

Product description Package Contents Item Number

Laser range meter PD 4 PD 4 laser range meter complete with soft pouch, hand strap, 2x AA batteries and operating instructions.

00202416

Triple PD 4 combo 3x PD 4 laser range meter complete with soft pouch, hand strap, 2x AA batteries and operating instructions.

03439615

Technical data

PD 4

Max. measuring distance 70 m

Min. measuring distance 0.2 m

Laser 635 nm, Class 2 (IEC 825-1), Class II (FDA 21 CFR)

Accuracy ± 2 mm

IP protection class IP X5

Battery type 2 x AA

Operating temperature range -15 - 50 °C

Dimensions (LxWxH) 120 x 45 x 28 mm

Weight without batteries 180 g

For easy, everyday measuring.

Advantages n 100% waterproof and dust tight. Very ruggedly built, with an

extremely robust casing to withstand the harshest jobsite conditions

n Single button operation. Extremely easy to use. Makes measuring a one person task. Ergonomic design for a unique level of operating convenience

n Laser precision for very reliable measurements

2


Measuring systems



Applications n Measuring distances of 0.05m to 100m with laser precision n Direct distance measurements and area calculations n Measuring quickly and safely in places where access is difficult

Ordering


Laser range meter PD 40 PD 40, hand strap, 2 x AA alkaline batteries, canvas pouch, battery compartment key and operating instructions.

00388214

Technical data

PD 40



Calculation functions +, -, Area


Accuracy ± 1 mm

IP protection class IP 54

Battery type 2 x AA




Ruggedly built. For good measure.

Advantages n Only one person required for most tasks n Easy to use n Measure distances in less than a second n Quick and easy calculation of areas n Safe and easy measurements with the help of a measuring

extension in inaccessible areas


Measuring systems


Applications n Measuring distances of 0.05m to 200m with laser precision even

under the toughest outdoor conditions n Direct distance measurements, area, volume, Pythagoras and

many more calculations n Checking parallels and right angles with the MIN/MAX function n Measuring quickly and safely in places where access is difficult

Ordering


Laser range meter PD 42 In cardboard box, with PDA 65 soft pouch, hand strap, PDA 51 target plate, 2 AA batteries and operating instructions.

00388215

Technical data

PD 42



Calculation function +, -, Area, Volume, Pythagoras (3x), Timer, Memory (30x), min/max, Painters area, Setting out


Accuracy ± 1 mm


Battery type 2 x AA




Made to measure. Everywhere.

Advantages n Only one person required for most measuring tasks, even in

bright sunlight n Built-in optical sight for outdoor use n Graphical user interface with many functions n Save highly accurate measurements in memory - no need to

re-measure n Safe and easy measurements with the help of a measuring

extension in inaccessible areas

2


Measuring systems


Accessories

PD 4

PD 4

0

PD 4

2

Product description Item Number

Target plate PDA 50 To increase the measuring range outdoorsSize 130 x 120 mm

n n n 00282388

Target plate PDA 52 To increase the measuring range outdoorsSize 296 x 210 mm

n n n 00226879

Laser visibility glasses PUA 60 For improved visibility of the laser spot or line

n n n 00284988

Tool pouch PDA 64 For PD 4

n 00226880

Tool pouch PDA 65 For PD 40/42

n n 00226877

Measuring extension PDA 71 For comfortable measurements from the floor and from inaccessible places

n 00226878

Marker pen PUA 70 set For marking on all kind of building surfaces

n n n 00340806


Measuring systems

Point laserPMP 34

Applications n Plumbing, levelling, setting out right angle/inclines and

transferring measuring points n An interior range of up to 30 meters, quick exterior alignment n Mechanical installation: transfer pipe fastening points from floor

to ceiling n Steel construction: vertical alignment of steel columns n Drywall installation: setting out of drywall partitions at a perfect

right angle

Ordering


Point laser PMP 34 PMP 34 point laser, soft pouch, 2 target plates, PMA 73 drywall adapter, 4 batteries and operating instructions.

00286135

Point laser PMP 34 kit PMP 34 point laser, soft pouch, PA 250 frame clamp, 2 target plates, PMA 71 wall mount, PMA 73 drywall adapter, PMA 74 magnetic bracket, 4 batteries, PMP 34 operating instructions, PMA operating instructions, producer certificate. Supplied in a Hilti toolbox.

00286141

Technical data

PMP 34

Laser functionality One plumb, One 90° laser beam


Accuracy ± 3 mm @ 10 m


Battery type 4 x “AA” alkaline




Plumb bob, builder’s square and spirit level at the touch of a button.

Advantages n Two vertical measuring points, plumbing above and below n Two measuring points at a 90° angle n Horizontal alignment n Automatic self-levelling up to +/- 5°

2


Measuring systems


Point laserPMP 45

Applications n Setting out drywall tracks for partitioning n Transferring fastening points from floors to ceilings n Vertical alignment of windows and doors n Vertical alignment of steel and timber structures

Ordering


Point laser PMP 45 Complete with soft pouch, 4 batteries, manufacturer’s certificate and operating instructions.

00411279

Technical data

PMP 45

Laser functionality Plumb, Square, Level, Align

Laser 620-690 nm, Class II






Plumb, square, level and align: the winner on points.

Advantages n Impact Protection System (IPS) for maximum durability n Plumb, square, level and align n 5 laser beams n Ideal shape and brightness of laser point n Fixed foot with built-in magnets for easy attachment to drywall

tracks n Compact and efficient design


Measuring systems

Line laserPML 32-R

Applications n Line laser for rapid and simple levelling and vertical aligning n Horizontal aligning of suspended ceilings or cable trays n Vertical aligning of pipe clamps n Horizontal and vertical alignment of tiles

Ordering


Line laser PML 32-R PML 32-R line laser, PUA 60 laser visibility glasses, soft pouch, 2 target plates, 4 AA batteries and operating instructions.

00331454

Line laser PML 32-R kit PML 32-R line laser, PUA 60 laser visibility glasses, soft pouch, 2 target plates, 2 marking pencils, 4 AA batteries, PMA 71 wall mount, PMA 70 pipe adaptor, PRA 50 target plate and operating instructions. Supplied in a Hilti toolbox.

00331451

Line laser PML 32-R / PMA 30 PML 32-R line laser, PMA 30 laser receiver, PUA 60 laser visibility glasses, 2 soft pouches, 2 target plates, 6 AA batteries and operating instructions.

00381367

Technical data

PML 32-R

Laser functionality One horizontal line, One vertical line laser beam

Operating range with laser receiver

2 m - 30 m



Battery type 4 x “AA” alkaline or rechargeable NiMH batteries




Always the right tool at hand.

Advantages n Easy, single button operation for all applications n Hands remain free for working along the precisely aligned

reference line n The PMA 30 laser receiver saves time by “catching” the laser

line and allowing use of the tool even in very bright conditions n Automatic self levelling system (± 5°) n The laser line blinks to warn the user when the tool is outside its

self levelling range for reliable results every time n Versatile accessories simplify levelling and aligning at various

heights

2


Measuring systems


Combi laserPMC 46

Applications n Transferring reference heights n Vertical alignment of pipes n Levelling electric sockets, cable trays and pipe installations n Levelling and aligning doors and windows n Setting out drywall tracks for partitioning n Transferring fastening points from floors to ceilings

Ordering


Combi laser PMC 46 kit Complete with soft pouch, PMA 78 universal adapter, PMA 20 compact tripod, 4x AA batteries, manufacture’s certificate and operating instructions. Supplied in a Hilti toolbox.

00411210

PMC 46 kit + PMA 31 receiver combo Complete with soft pouch, PMA 31 receiver, PMA 78 universal adapter, PMA 20 compact tripod, 4x AA batteries, manufacture’s certificate and operating instructions. Supplied in a Hilti toolbox.

03468565

Combi laser PMC 46 (tool only) Complete with soft pouch, 4x AA batteries, manufacture’s certificate and operating instructions.

00411207

Combi laser PMC 46 (tool only) + PMA 78 + target plate combo

Complete with soft pouch, 4x AA batteries, PMA 78 universal adapter, target plate and operating instructions.

03473984

Technical data

PMC 46

Laser functionality Level, Align, Plumb, Square

Laser 620-690 nm, class II






Level, align, plumb and square: all in one.

Advantages n New (IPS) Impact Protection System, with rugged inner

pendulum housing n Offers the complete solution for measuring applications, with

everything required in one toolbox n Complete with an innovative universal adapter and compact

tripod for placing or mounting the tool wherever needed


Measuring systems

Accessories

PMP

34

PMP

45

PML

32-R

PMC

46


Laser receiver PMA 30 n 00002842

Laser receiver PMA 31 n 00411288

Target plate PMA 54 (mm) Enhances the visibility of the laser point

n n 00411289

Target plate PMA 50 (cm) kit Enhances the visibility of the laser point; centimeter scaling

n n 00286147

Target plate PRA 51 (cm/in) n n n n 00285416

2


Measuring systems


Accessories

PMP

34

PMP

45

PML

32-R

PMC

46


Universal adapter PMA 78 n n n n 00411286

Tripod PMA 20 n n n n 00411287

Pipe adapter PMA 70 For fixing the PML 32 or the PMP 34 on pipes (20 to 60 mm dia.) or on PUA 10 telescopic brace

n n 00378037

Wall mount PMA 71 For installing the PML 32 or the PMP 34 on a wall at any height or for use with PMA 70 pipe adapter and PUA 10 telescopic brace

n n 00378036

Magnetic bracket PMA 74 To fasten the tool on magnetic surfaces

n n n n 00286150

Drywall stand PMA 75 Simplifies the floor-to-ceiling alignment of drywall channels

n 00287176

Ceiling clamp PMA 76 For simple and fast fastening on the ceiling profile

n n n n 00272707

Telescopic brace PUA 10 For use with both PMA 71 wall mount and PMA 70 pipe adapter, adjustable length 1.35 to 2.8 m

n n n n 00378038

Laser visibility glasses PUA 60 For improved visibility of the laser spot or line

n n n n 00284988

Frame clamp PMA 25 n n n n 00272790


n n n n 00340806

Laser warning sign n n n n 03092084


Measuring systems

Rotating laserPRE 3

Applications n General levelling and setting out slopes n Excavation work n Transferring reference heights and meter marks n Formwork and pouring concrete n Checking heights

Ordering


PRE 3 all-in-one combo PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, + PRA 80 laser receiver holder, PRA 85 mains adapter, PUA 20 tripod, PUA 50 levelling staff, PRA 78 slope adapter and PRA 81 height transfer device. Supplied in a Hilti toolbox.

03459237

PRE 3 complete kit + Slope adaptor PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, PRA 80 laser receiver holder, PRA 85 mains adapter, PUA 20 tripod, PUA 50 levelling staff and PRA 78 slope adapter. Supplied in a Hilti toolbox.

03455736

PRE 3 complete kit PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, PRA 80 laser receiver holder, PRA 85 mains adapter, PUA 20 tripod and PUA 50 levelling staff. Supplied in a Hilti toolbox.

03455735

Rotating laser PRE 3 PRE 3 rotating laser, PRA 84 battery pack, PRA 31 laser receiver, PRA 80 laser receiver holder and PRA 85 mains adapter. Supplied in a Hilti toolbox.

00211937

Technical data

PRE 3


2 m - 400 m

Laser 635 nm, Class II

Accuracy (at 24°) ± 0.5 mm @ 10 m

Levelling system Fully automatic

Self levelling range ±5 °


Battery type Li-Ion



Weight without batteries 2.4 kg

Fast, simple and rugged. For maximum efficiency outdoors.

Advantages n One button operation makes the tool extremely easy to use n Digital measurement faster and more accurate for checking

offsets n Li-ion battery and ability to charge during operation means no

down time and no need to buy new batteries n Unaffected by the sun and other light sources thanks to

PulsePower technology n Clever accessories that meet the needs of a whole range of

users

2


Measuring systems


Rotating laserPR 25 IF

Applications n Interior and exterior applications n Horizontal, vertical alignment and setting out inclines n Transferring right angles, stationary laser line for exact alignment n Applications for which traditional levelling tools, such as spirit

level, plumb bob or chalk line are used n Drywall installation, suspended ceiling, electrical and mechanical

installations n Building construction, civil engineering and steel construction

Ordering


PR 25 IF complete kit PR 25 IF rotating laser, PRA 25 laser receiver, PRA 50 target plate, manufacturer’s certificate, operating instructions, PUA 20 Tripod, PUA 50 levelling staff and PRA 75 receiver holder. Supplied in a Hilti toolbox.

03457979

PR 25 IF + wall bracket combo PR 25 IF rotating laser, PRA 25 laser receiver, PRA 50 target plate, manufacturer’s certificate, operating instructions and PRA 70 Wall mount. Supplied in a Hilti toolbox.

03441096

Rotating laser PR 25 IF PR 25 IF rotating laser, PRA 25 laser receiver, PRA 50 target plate, manufacturer’s certificate and operating instructions. Supplied in a Hilti toolbox.

00286210

Technical data

PR 25 IF


2 m - 300 m

Laser 635 nm, Class 3R (IEC 825-1), Class IIIa (FDA 21 CFR)

Accuracy (at 24°) ± 0.75 mm @ 10 m




Battery type 3 “D” alkaline batteries or recharg. battery pack




Visibly superior all round.

Advantages n Auto Alignment System quickly aligns the laser beam by the

touch of a button n Remote control and electronic receiver in one device n Unique levelling system helps ensure the highest accuracy every

time n 4 handle design for superior tool protection n A fully enclosed rotating head for added protection n PR 25 IF is weather and dust resistant with an IP 56 protection

code


Measuring systems

Rotating laserPR 35

Applications n Levelling (transfering heights, pouring concrete, excavation) n Aligning (transfering building lines, aligning columns, facades) n Grading (ramps, parking lots, pipes) n Squaring (walls, partitions)

Ordering


Rotating laser PR 35 PR 35 rotating laser, PRA 35 remote control / laser receiver, PRA 84 Li-Ion battery pack, PRA 80 laser receiver holder, PRA 85 mains adapter, PRA 50 target plate, 2x “AA” alkaline batteries and operating instructions. Supplied in a Hilti toolbox.

00426381

Technical data

PR 35


2 m - 300 m

Laser 635 nm, Class II

Accuracy (at 24°) ±0.75 mm @ 10 m



IP Protection class IP 56

Battery type Li-Ion




Versatility that works for you.

Advantages n Digital measurement - read offsets from the PRA 35 remote

control / laser receiver n Auto alignment lets the tool align the beam for you n Digital slope display simplifies grading tasks n Surveillance mode - the tool checks accuracy at regular intervals n Remote control with 100m operating range - makes alignment a

one person task

2


Measuring systems


Rotating LaserPRI 2

Applications n Specially designed for interior applications n Alignment in the horizontal, vertical and inclined planes n Transferring heights n Setting out right angles

Ordering


Rotating laser PRI 2 PRI 2 rotating laser, PRA 2 remote control, PRA 50 target plate and operating instructions. Supplied in a Hilti toolbox.

00331411

Technical data

PRI 2


2 m - 300 m

Laser 635 nm, Class 3R (IEC 825-1), Class IIIa (FDA 21 CFR)

Accuracy (at 24°) ± 1 mm @ 10 m




Battery type 2 “D” alkaline batteries or re-charg. battery pack




Interior finishing made easy.

Advantages n Quick, easy and accurate results n The rotating laser beam can be switched at any time, by infrared

remote control, to a stationary laser line that can be shifted in the horizontal or vertical planes

n 360° remote control for easy, convenient operation n Robustly built for jobsite use, especially for all indoor

applications n Automatic shock warning and cut-out when knocked off level by

an impact or excessive vibration, for reliable results at all times n The finely adjustable PRA 70 wall bracket further simplifies

countless levelling and alignment applications


Measuring systems

Rotating laserPR 26

Applications n Levelling suspended ceilings n Positioning drywall tracks n Aligning raised floors n Installation of pipes and cable trays n Aligning formwork

Ordering


Rotating laser PR 26 PR 26 rotating laser, rechargeable battery with charger, PRA 26 laser receiver, 2 batteries (type AA, alkaline), PRA 54 target plate and operating instructions. Supplied in a Hilti toolbox.

00388029

PR 26 + PRA 70 wall mount bracket combo

PR 26 rotating laser, rechargeable battery with charger, PRA 26 laser receiver, 2 batteries (type AA, alkaline), PRA 54 target plate, PRA 70 wall mount bracket and operating instructions. Supplied in a Hilti toolbox.

03445410

PR 26 complete kit PR 26 rotating laser, rechargeable battery with charger, PRA 26 laser receiver, 2 batteries (type AA, alkaline), PRA 75 laser receiver holder, PUA 20 tripod, PUA 50 staff, PRA 54 target plate and operating instructions. Supplied in a Hilti toolbox.

03457978

Technical data

PR 26


2 m - 300 m

Laser 532 nm, Class 3R

Accuracy (at 24°) ± 1 mm @ 10 m

Levelling system Self-levelling



Battery type 3 “D” alkaline batteries or recharg. battery pack




Green beam - the new colour of visibility.

Advantages n Green lasers are up to 4 times brighter than conventional lasers

and thus ensure significantly better visibility n Rechargeable battery pack comes standard with every tool

(NiMh) n Perfect for highly luminous environments and laying out

distances n PRA 26 remote control and electronic receiver in one device

2


Measuring systems


Accessories

PRE

3

PR 2

5 IF

PR 3

5

PRI 2

PR 2

6


Laser receiver PRA 31 For locating the rotating laser beam easily and accurately within an area of 300m in diameter (metric)

n n 00426386

Laser receiver holder PRA 80 For easy attachment of the laser receiver to a levelling staff

n n 00360058

Height transfer device PRA 81 (mm) For transferring meter marks with a built-in measuring tape, extendable up to 1m. To be used in conjunction with PRA 31, PRA 35 or PRA 38

n n 00368627

Laser receiver holder PRA 75 For attaching the PRA 20 and PRA 25 detector to the PA 951 measuring staff or other staff

n n 00282837

Remote control / laser receiver PRA 35 For locating the rotating laser beam easily and accurately within an area of 300m in diameter (metric) and for remote control of the PR 35

n 00426384

Remote control PRA 2 Remote maintenance of the PRI 2 up to 30 m

n 00331418

Laser receiver PRA 22 Use the full potential of your rotating lasers and get the highest versatility for all the applications

n 00331419

Laser receiver holder PRA 77 For use with PRA 22 laser reciever

n 00331420

Remote control / laser receiver PRA 26 n 00388031

Remote control / laser receiver PRA 25 n 00286212

Target plate PRA 51 (cm/in) n n 00285416

Target plate PRA 54 (cm/in) n 00226976


Measuring systems

Accessories

PRE

3

PR 2

5 IF

PR 3

5

PRI 2

PR 2

6


Battery pack PRA 84 Li-Ion CPC battery for PRE 3 rotating laser

n n 00360055

Mains adapter PRA 85 Adapter for recharging the PRA 84 battery pack (in the tool or externally)

n n 00360056

Car battery plug PRA 86 For recharging the PRA 84 battery in a motor vehicle

n n 00360057

Batter-board adapter PRA 750 n n n 00435441

Batter-board receiver holder PRA 751 n n n 00435442

Battery charging set rotating lasers(For PR 25/ 25 IF/ 26 supply with PRA 801 and PUA 80)

n n 03427995

Battery pack PRA 801 Battery pack includes battery charger AD-7C, battery NiMH, battery holder, operating instructions

n n 00282834

Battery charger PUA 80 Replacement or additional charger for charging single battery pack

n n 00377458

Facade adapter PRA 760 n 00435439

Vertical angle PRA 770 n 00435440

Wall mount PRA 70 (cm) Mount the PR 26, PR 25 IF, PR 25, PR 20 to wall, tripod, column or stud

n n n n 00285314


n n n n n 00340806

Laser warning sign n n n n n 03092084

2


Measuring systems


Accessories

PRE

3

PR 2

5 IF

PR 3

5

PRI 2

PR 2

6


Slope calculator PRA 52 Calculating a slope in %, grade, height is now easier than everPocket-size aid for easy setting out on slopes

n n n n n 00282838

Slope adapter PRA 78 For setting PRE 3 or PR 20 / 25 / 26 to inclinations of up to 60%

n n n n 00360059

Telescopic staff PA 951 (cm) Length 1.25 m - 5 m, high-grade fiberglass reinforced plastic, electrically non-conductive, suitable for outdoor applications, screw mounting point for attaching the PA 350 laser receiver directly to the rod for measuring

n n n n n 00338129

Measuring rod PUA 50 (cm) Aluminium, adjustable in height from 0.88 to 4 m; magnetic nail holder at the base of the staff for setting nails into formwork

n n n n n 00400935

Measuring rod PUA 55 (cm) Aluminium, adjustable in height from 1.31 to 2.42 m

n n n n n 00435443

Tripod PUA 20 kit PUA 20 tripod with 5/8” thread, adjustable in height from 1.06 to 1.70 m, metal tripod head, self-locking mechanism for the legs and PUA 50 aluminium measuring staff, adjustable to 4m, measuring scale in cm

n n n n n 00400936

Tripod PUA 20 PUA 20 tripod with 5/8” thread, adjustable in height from 1.06 to 1.70 m, metal tripod head, self-locking mechanism for the legs

n n n n n 00400934

Crank tripod PA 921 The PA 921 is the type of tripod most frequently encountered in interior finishing perfect for transferring benchmarks (datum marks). Height adjustable crank tripod (0.73 to 1.63 m) with 5/8” thread, built-in bubble level for quick and easy setup

n n n n n 00378663

Crank tripod PA 931 (cm) Height adjustable crank tripod (0.86 to 2.87 m) with 5/8” thread, integrated measuring scale in mm allows accurate tool positioning

n n n n n 00315998

Tripod bag PUA 40 The perfect bag to carry tripods and levelling staff

n n n n n 00377847


Measuring systems

TranspointerPX 10

Applications n Finding the drill bit exit point or transferring the starting point

before drilling through-holes in floors or walls with diamond coring equipment or rotary hammer drills on concrete or masonry

n Wall thickness measurement for easy selection of the required drill or core bit length

Ordering


Transpointer PX 10 PX 10T transmitter, PX 10R receiver, two PDA 60 hand straps, PUA 91 adhesive putty, PUA 92 adhesive strips, two 9v alkaline batteries and operating instructions. Supplied in a Hilti toolbox.

00273124

Transpointer PX 10 kit PX 10T transmitter, PX 10R receiver, two PDA 60 hand straps, PUA 91 adhesive putty, PUA 92 adhesive strips, two 9v alkaline batteries, PX 10 operating instructions, PUA 70 marker and PXA 70 slope adapter. Supplied in a Hilti toolbox.

00273126

Technical data

PX 10

Accuracy Positioning accuracy: ± 2mm @ 200mm wall thickness,

Thickness measuring accuracy: ±5% of wall thickness

Measuring range 5 cm - 135 cm


Operation time with alkaline battery

17 h

Battery type 1 x 9v

Dimensions PX10 (LxWxH) PX10T: 160 x 95 x 33 mmPX10R: 210 x 95 x 33 mm

Weight PX10T 240 g

Weight PX10R 275 g

Point through floors and walls. Reliable through-holes thanks to magnetic field detection.

Advantages n Allows drilling to be carried out quickly, efficiently and safely n No need for time consuming procedures such as drilling pilot

holes, measuring out manually or “trial and error” n Overhead drilling becomes unnecessary n Positions can be transposed through floors and walls n Direction arrows for easy, user friendly operation n The unique slope adapter allows the drill bit exit point or starting

point to be determined for a given angle or, alternatively, the required drilling angle to be determined for a given exit point and starting point

2


Measuring systems


Accessories

PX 1

0


Slope adapter PXA 70

n

00273130

Adhesive putty PUA 91 n 00273131

Adhesive strip PUA 92 n 00273132


Measuring systems

Rebar detectorPS 35

Applications n Locating reinforcement, copper or aluminium pipes in concrete n Locating copper or aluminium pipes in brick walls n Determining the position and depth of existing rebars for

post-installed rebar connections n Checking concrete cover over reinforcement for trouble-free

anchor setting

Ordering


PS 35 rebar detector PS 35 rebar detector, hand strap, 4x AAA batteries, pouch, marker and operating instructions. Supplied in a Hilti toolbox.

00407961

PS 35 + PX 10 kit combo PS 35 rebar detector, PX 10 kit and operating instructions. Supplied in a Hilti toolbox.

03469711

Technical data

PS 35

Accuracy of depth measurement for rebar

±3mm - ±11 mm

Materials detected Ferrous, non-ferrous objects

Max. detection depth 120 mm


Battery type Alkaline (AAA)




The best way to avoid rebar hits.

Advantages n Avoiding hitting rebar increases drill bit lifetime n Avoids damage to rebar, copper and aluminium pipes when

drilling n High depth measurement precision for rebar n Simple, user-friendly operation n Clear indication of detection with red/green LED n Ruggedly built for job site use

2


Measuring systems


FerroscanPS 200

Applications n Verification of reinforcement: locate rebar when plans are not

at hand, for acceptance inspections, before structural repair or change of loads on a structure

n Verification of concrete cover over reinforcement: obtain concrete cover information over large areas for acceptance inspections, before renovation or for quality control

n Avoiding rebar hits: Avoid cutting through critical reinforcement or costly rebar hits

n Coring and hammer drilling without costly rebar hits and avoidance of damage caused by cutting through structurally significant reinforcement

Technical data

PS 200

Storage memory(Scanner)

9 Image scans plus up to 30m (100ft) Quickscan recordings

Storage memory(Monitor and scanner)

1000 Image scans or 500 Quickscans plus 1h Voice

Max. detection depth 160 mm (at 36 mm rebar diameter)


Monitor dimensions 264 mm x 57 mm x 152 mm

Scanner dimensions 260 mm x 132 mm x 132 mm

Monitor weight 1.4 kg

Scanner weight (incl. battery) 1.4 kg

The complete system for rebar detection, cover measurement and rebar diameter estimation.

Advantages n Quick, easy scanning of large areas n Individual scans over lengths of up to 30m n Immediately viewable true image of reinforcement shown on the

monitor n Data transfer from scanner by infrared link for monitor viewing n Cordless scanner for maximum freedom of movement n Professional data evaluation and management software n Engineering support services available

Ordering


Ferroscan system PS 200 Comprising: PS 200 S scanner, hand strap and soft pouch, PS 200 M monitor, soft pouch and memory card, headset, 2 battery packs, 2 battery chargers, carry belt, reference grid set, adhesive tape, marker set, USB data cable, PC-software on CD-ROM and operating instructions. Supplied in a Hilti toolbox.

00377638

Scanner PS 200 S kit PS 200 S scanner, PS 200 M monitor, PSA 94 memory card, headset, 2 battery packs, 2 battery chargers, 10 (2x5) reference grid sets, data cable, soft pouches, adhesive tape, marker set, hand strap and PC software. Supplied in a Hilti toolbox.

00237293

NO COSTS

MANUFACTURERS WARRANTY

REPAIR COST LIMIT

LIFETIME SERVICE

1 Year up to

Lifetime Lifetime

Documents

Measuring systems. - d3is8fue1tbsks.cloudfront.netd3is8fue1tbsks.cloudfront.net/PDF/Hilti/Hilti PR 26.pdf · PR 35 rotating laser. Page 38 ... Measuring systems. | T 131 292. Measuring