Upload
hoangtram
View
220
Download
4
Embed Size (px)
Citation preview
Applied Mechanics and Materials Vols. 716-717
Mechanical Engineering and Materials Science
Selected, peer reviewed papers from the 2014 International Conference on Intelligent Mechanics and MaterialsEngineering (ICIMME 2014), December 27-28, 2014, Shenzhen, China
vonM.R. Xue
1. Auflage
Trans Tech Publications 2015
Verlag C.H. Beck im Internet:www.beck.de
ISBN 978 3 03835 386 7
schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG
Table of Contents
Preface
Chapter 1: Materials Science and Processing Technologies, ChemicalProcesses and Biotechnologies
Dyeing Process of PSA/MPIA Blended FiberC.S. Ling 3
The Irradiation Crosslinking of Poly(vinylidene fluoride-chlorotrifluoroethylene)J. Chen 7
Study on the Preparation of Oil-Coal-Water SlurryH.L. Qi, K. Gai, D.P. Ma and B. Zheng 11
Performance Study of Coal Water SlurryK. Gai, H.L. Qi, D.P. Ma and W.L. Liang 16
Electronic Structure and Optical Properties of Cu-Doped SnO2M. Xu 20
Effect of Ferulic Acid and its Oxide on Qualities of Soy Protein-Isolate/Chitosan CompositeFilmsC. Zhang, X.F. Guo, Y. Ma and X.Y. Zhao 24
Ferulic Acid and its Oxide Enhance Performance of Soy Protein-Isolate/ChitosanComposite FilmsC. Zhang, X.F. Guo, Y. Ma and X.Y. Zhao 28
Preparation and Luminescent Properties of the La3+ Doped Tb3+-HydroxyapatiteW.B. Liu, Adu, Y.G. Lv, L.L. Yu, Y.X. Du, W.E. Wang, C.X. Wang, J.H. Zheng, H.B. Gao, L.Zhang and D. Song 32
A Novel Compound Machining of AISI 321 Stainless Steel Using Small Diameter ElectrodesY. Shen, Y.H. Liu, H. Dong and R.J. Ji 36
Fabrication of Fe3O4 Nanoparticles Decorated Multi-Walled Carbon Nanotubes MagneticNanocompositeL.L. Chen 41
Modification of PLA with Chain ExtenderA.S.M. Elhassan, H.A.M. Saeed, Y.A. Eltahir, Y.M. Xia and Y.P. Wang 44
Development of New Microalloyed Steel by Alloying with TungstenJ.W. Zhao and Z.Y. Jiang 48
Effect of Cr Addition on Microstructure and Mechanical Property of Cu-17Ni-3Al-1.2FeAlloyW. Wu, C. Zhao, Y.H. Weng, Z.Q. Luo and W.W. Zhang 52
Application of ANOVA into the Evaluation of Homogeneity of MaterialsR.B. Ning, Q. Li and S.N. Xu 57
Yellowish-White Emission from Sol-Gel Mediated Lithium and Aluminium Co-Doped ZincOxide Thin FilmsX.L. Tan, W.H. Zhang and J.W. Wang 63
The Research of Grading Dehydration Technology on Slurry Pipeline Grade ConveyorH.W. Liu, H.T. Chen, G.Y. Pu and C.L. Pan 67
Damping Performance of CB Filled NR/ENR, NR/BR and NR/IIR CompoundsY.Q. Wang, Z. Peng, J.P. Zhong, K. Xu, C.J. Yang, Y.Y. Luo and P.W. Li 70
Microstructure and Mechanical Properties of Low-Si Spring Steels Produced byQuenching- Isothermal-Quenching-Tempering ProcessF. Zhao, H. Zhang and Y.L. Liang 74
Determination of Competitive Adsorption Isotherm of the Etodolac Enantiomers UsingInverse MethodS. Qi, L. Hui and W.F. Yu 79
Research on the Thermal Conductivity and Thermal Diffusivity of Magnesium AlloyR.H. Guo, J.Y. Zhang, L.M. Wang, Y. Fan and Y.J. Guo 84
A Study on the Cool Charge Characteristics of Ice Storage Plate Filled with Eutectic SaltC.F. Ji, X.Y. Yu and G. Liu 88
Modeling of Single Flow Zinc-Nickel Battery for System Efficiency ImprovementY.X. Li, M.C. Dong, P.C. Zhao and Y.D. Han 94
Study Status of Giant Magnetostrictive Material Applied in Measurement FieldH.F. Liu, J.C. Zhang, K.R. Li and Y. Li 98
Study of Ozone Decomposition Using TiO2-Graphene CompositesX. Tan, Q.Q. Shang and S.Y. Wang 102
Fractional Extraction and Structural Characterization of Coconut Shell HemicelluloseF.H. Zhao, Y. Chen, R.L. Chen, M. Liu, Y.Q. Guo and G.L. Fu 108
Preparation of Al-MCM-48 and Ti-MCM-48Z.X. Zhao, L.M. Zhang and P. Chen 114
Influence of Inorganic Salts on the Refraction Index of WaterX.Y. Zhao, Y.F. Peng, C.C. Zhai, X.Y. Han and Y. Zhang 118
Study on Heat Stability of Polyphenol Oxidase from Purple Sweet PotatoL. Gao, L. Lin, L.C. Zhao and F. Wu 122
Synthesis of Alkyl Polyglycoside and its Application in the GlyphosateG.M. Xu and T.J. Shi 126
Development of an Organic Acid Antifreeze CoolantJ.M. Chen, G.J. Leng, R.J. Yi and B. Gao 130
Numerical Simulation of Dendrite Growth of Binary Alloy Using Phase-Field MethodF.H. Liu and M. Gao 133
Study of Secondary Electron Emission Depended on Surface Charge of Space InsulatorMaterialsN. Feng, D.T. Li, S.S. Yang, Y.F. Chen, D.T. Tang and C.X. Zhao 137
Steam Gasification of Biomass Coupled with Lime-Based CO2 Capture in a Dual FluidizedBed: A Modeling StudyX.M. Wang, X.B. Xiao, X.J. Chen, J. Liu and W.Y. Li 142
Study on the Pathogens Carrier Rate of “Red Globe” Table Grape at DifferentTemperaturesL. Zhang, L. Gao, X.H. Li, P.Y. Zhao, F. Li, C.X. Shao, Y.Y. Li and H.Y. Ma 146
The Effects of the Post-Annealing Atmosphere on the Ultraviolet Responsivity of n-ZnO/p-Silicon Nanowire HeterojunctionH. Zhou, Y.D. Zhu, C. Hu and A.Y. Zuo 150
Prediction of Mechanics Behaviors and Analysis on Dynamic Characteristics for FiberReinforced Metal Matrix Composites (MMC) ShaftsY.D. Sha, L. Luo and Q.Y. Jia 154
Structural and Magnetic Properties of CoFe2O4 Thin Films via Sol-Gel MethodS.H. Yang, D.G. Li, H.B. Yang and H.C. Yan 159
Synthesis, Spectroscopic Properties of Bis-Boc-L-alanine Modified 1,8-NaphthyridineLigand Induced by Cr3+
G.Z. Gou, B. Zhou, L. Shi, N. Wu, X.L. Chen and W. Liu 163
Electronic Structures and Theoretical Electronic Spcetra of Meso-Phenyl and 3,5-diarylSubstituted BODIPY DyesG.Z. Gou, L. Shi, B. Zhou, X.L. Chen, W. Liu and C.Y. Mang 167
Grain Refinement Strengthening of Sm in AZ61 AlloyQ. Zhang, Q.A. Li, J. Chen and X.Y. Zhang 171
Controlled Synthesis and Optical Properties of CuInS2 NanocrystalsX.C. Guo and W.H. Zhou 175
The QSPR Study for the Net Heat of Combustion of Esters Based on Ant ColonyOptimizationH.Y. Cao and R. Wang 180
Review the Effect of Welding Processes on the Comprehensive Mechanical Properties ofMagnesium Alloy JointsZ.J. Zhang, B.L. He, Z.M. Lv and K. Wei 184
The Factors Impacting the Surface Quality of Machining and Modifying MeasuresS.F. Peng and T.G. Liu 188
b Mechanical Engineering and Materials Science
Research on Curing Processes in RTM by FEMY.J. Yu 192
First-Principle Study on the Hexagonal Phase Properties for ZnO under High-PressureC. Yang 196
Study on the Cutting Process for Remanufacture Deposited MaterialsZ.Y. Wu, K. Zhang, X.J. Tang, X.L. Tian and S.H. Wang 200
Split Tire Tread Rubber Processing Machinery and Fixture Design ExplorationY.J. Gao 204
Study on the Structure of the Alloy Welding Mold and the Welding SpecificationsK.L. Yu 208
Chapter 2: Construction and Structural Engineering, Materials andTechnologies
Design and Implementation of Green Design in Architectural Design SystemJ. Xi and X.J. Chu 215
Study on Flow Characteristics inside a Spillway Tunnel of Hydropower StationH.Q. Zhang, B. Cao, Y.L. Lou and W.K. Tan 219
Research on Numerical Model for Earthquake Induced Progressive Collapse of High-RiseBuildingsY.X. Wang and L. Huang 223
Research on Optimum Design of Underground Diaphragm Wall with Interior BracingX.Z. Sui and X.C. Liu 227
The Exploration of the Design Principle of the Railway Station SquareJ. Zhao 232
Experiment Study on Concrete Resistance to Chloride Ion PenetrationW.H. Li, Y.Y. Xu and Y.H. Wang 236
Research on Measures of Civil Engineering Construction to Achieve the Landscape GreenEnergy SavingL. Ke, J.C. Chang and Q. Zheng 240
Pressure Distribution of Pressure and Non-Pressure Sections of a Hydropower StationSpillway TunnelH.Q. Zhang, W.K. Tan, Y.L. Lou and Q. Zhao 244
Rational Research of Deep Concave Open-Pit Slope Angle of Lower PartX.L. Ma, G. Zhang, Q.G. Ren and X.L. Jiang 248
Calculating Stability Factor Using Linear Sliding Method is Not Suitable for all Sandy SoilSlopesW.W. Zhu 252
Study on the Information System of Tunnel Stability in Arching Process of SurroundingRockX.D. Liang 256
Preliminary Exploration on Landscape Planning around Lake Zone in the CityH.G. Yang, C. Huang, Y. Wang, F.Y. Wang, H.L. Sun and Y.B. Huang 260
Research on the Application of Energy Saving Technology in Building OperationsY.G. Zhang and X.H. He 265
Research on Green Public Building Construction IndustryQ. Liu 269
Research on Decoration Engineering Design and its Application Based on Value ChainAnalysisX.N. Yu, Y. Wang and X.S. He 273
Application on Green Building Energy Design Evaluation Based on Support VectorMachine ModelY. Wang, X.N. Yu and L.F. Zhang 276
Research on Spatial Coupling of the Urban Planning Based on Master and Main FunctionalAreaJ. Zhao and J. Zhao 280
Applied Mechanics and Materials Vols. 716-717 c
Effects of Cnoidal Wave-Induced Seepage on Vertical Breakwater Resting on PermeableElastic SeabedJ.K. Yang, H. Huang, L. Guo, J.R. Lin, Q.Y. Zhu and J.M. Zhan 284
Causations and Properties of Gate Pier Cracks of Concrete Dam in Northern Cold RegionL.Y. Zhou, C.D. Liu, X.G. Zhou and J. Yan 289
The Implementation of a Green Roof Self-Management SystemH. Luo, N. Wang, X.Y. Ye, L. Gao, J.C. Li and T. Jing 294
The Application of Building Information Model in the Design of Precast ConcreteStructuresE.W. Guo, Y.X. Qian and C.G. Li 299
The Application of Building Information Model in the Deepen Design of PrestressedConcrete StructuresE.W. Guo, Y.X. Qian, G. Xu, J.D. Gao and C.G. Li 303
Study on Cement Concrete Pavement Treatment Methods of Common Damage DiseasesZ.G. Liu, F.M. Xu and G.B. Cao 307
The Analysis of Reconstruction Planning on Service Area of Mount Wudang, HanshiExpressway in Hubei Province by GIS TechnologyQ. Zheng and D.D. Shen 310
Study on Anti-Skid Performance Degradation of Coating-Type Color Anti-Skid PavementF. Liu and J. Sun 314
Coated Thermal Resistance/Heat Reflection Pavement Construction TechnologyJ. Sun, F. Liu, L.C. Feng and N. Xie 319
Experimental Study of Bellows Duct Grouting Compactness with Quantitative DetectionF. Chu, Y. Cao, G.Z. Qi and L. Gao 322
The Application of Superiority Evaluation Method in Bid Evaluation of ArchitecturalEngineering ConstructionJ.E. Liu and M.J. Bi 328
A Review of Numerical Study of Micro-Scale Modeling for Asphalt MixtureD.F. Li and J.T. Zhang 332
Numerical Analysis of Natural Foundation Settlement under Different Subgrade Height inthe Yellow River Flood AreaJ. Geng, X.G. Ren, X.G. Wang and Z. Jin 338
Typical Portal Structure for Single Track High Speed Railway Tunnel in RuggedMountainous Area with High and Abrupt SlopeX.J. Zhou, B. Jiang, Y.F. Zhou and Y. Yu 342
Influence of Waterproof Wall in Approach Channel of Double-Line Ship Lock on FlowConditionJ.T. Li and W. Peng 347
Design of Rational Concatenation between Bridge and Portal for Mountain Tunnel on Highand Steep SlopeX.J. Zhou, B. Jiang, Y.F. Zhou and Y. Yu 351
Research on the Post-Evaluation Method for Common Highway Bridge StrengtheningJ. Liao, H.Y. Wu, F. Yang and C.J. Wang 355
Research on Number of High-Pressure Grouting of Hierarchical Multiple for Slope Basedon Reliability AnalysisZ.H. Xie, D. Yang, S.S. Liang and Z.Y. Jia 363
Application of High Strength Additives in SMA Asphalt MixtureW. Pan and J. Wu 370
Study on the Durability of Air Entrained Concrete after Long-Term Soaking in Multi-SaltSolutionX.P. Su and T.T. Wang 375
Research on Crack Prevention of Premixed Concrete of Pump Station Built in SummerY.J. Bie, J.Y. Huang, Y. He, M.D. Zhu, N.N. Zhang and S. Qiang 379
Experimental Research on Gravel Soil Shear StrengthW.F. Teng and W. Wang 383
Simulation on the Energy-Saving Design Model in Construction for Considering the Multi-Level FeaturesX. Xiang 387
d Mechanical Engineering and Materials Science
Simulation of the Pressure-Bearing Capacity Test Model in Architectural DecorationDesignL.M. Guo and A.M. Xiao 391
Stability Analysis of Loess Landslides Induced by IrrigationZ. Duan, Z.G. He and H.Z. Lin 395
Analysis Carrying Capacity of Hydraulic Concrete DamC.M. Cheng 400
Shear Isolation Design under Reinforced BlockadeS.J. Wang 406
Review of the Research Progress of Rock BurstY.B. Zhang, G.Y. Yu, B.Z. Tian and X.X. Liu 410
The Study on Early Cracking Mechanism of Cast-in-Place BoardJ.W. Xu 414
Analysis on Construction Influence of the Underpass of Oblique Crossing Subway TunnelM. Zhang, J. Fan and B.Y. Pan 418
Analysis of Causes of Deformation Modulus Mismatches Degree of Columnar JointedBasalt BlocksY.F. Wei, X.H. Xun and D.X. Nei 424
Feasibility Analysis of Radiant Floor Cooling and Heating System ApplicationsY. Du 428
Exploration into Architectural Design under the Concept of Sustainable DevelopmentS.Y. Ding, H.X. Yu and N. Qing 431
Analysis of Construction Project Basing on Concrete DurabilityK.K. Sun, Y. Zheng, M.F. Li, Z.P. Yang and S. Guo 435
The Optimization Research of Concrete Mixing Station LocationM. Lu, M.F. Li and X. Li 439
Current Status of Research on Two-Layer Porous AsphaltG.Q. Tang, M.L. Li, T.J. Ji and Z. Liu 443
Finite Element Simulation Analysis of Separate Overpass StructureY.L. Liu 448
Application and Construction Suggestions of Unbonded Prestressed for the Large Structureof Oxidation DitchT. Wang, L.J. Dou and K. Yin 452
Study on Shaking Table Model Test Design Scheme of Mechanical Response of GroundFissure Strongly under Seismic LoadM.M. Liu 456
Torsional Design Method of Bottom Frame Structure with Irregular PlaneH.Y. Deng and B.T. Sun 460
Research on Alignment Control of Cable-Stayed Bridge during ConstructionJ.J. Liang, K.W. Zhai, J. Fan and C.L. Shi 465
Model Simulation of Power Saving and Heat Saving in Intelligent Building Energy SavingDesignJ. Lu, X. Wu, Y. Yan and X.Y. Zhang 470
Simulation and Empirical Analysis on Real Estate Prediction Based on Friction ModelY. Yang and S. Li 474
Radiation and Sunlight Greenhouse Light Environment ModelW.X. Yang and X.Z. Wang 479
The Passenger Transfer Characteristic Analysis of Shenyang Subway Based onComparative Analysis MethodX. Qian 484
A Research on the Optimization of Earthwork AllocationX.K. Ren, L. Fan, J.W. Feng and X.D. Ning 488
Application Approach and Prospects of the Foundry Waste Sand and Slag in EngineeringT.Z. Zhang, C.Y. Wang and J. Wu 493
On Sustained Development of Green Building MaterialsA. Wang and R.F. Chu 497
Simulation Analysis of Baochuan Reinforced Concrete Beam-Supported AqueductD.Y. Ji 500
Applied Mechanics and Materials Vols. 716-717 e
Research on the Board of Supervisors Effect of Building Materials in SMEsM.S. Gao, Y. Wu and C. Zhao 504
Research on Test of Sunlight Greenhouse Illumination EnvironmentW.X. Yang and X.Z. Wang 509
Numerical Simulation of Projectile Penetration into UHMWPE Fiber Reinforced ConcreteY.W. Zhang, L.H. Yan and L.F. Li 513
Study on Environmental Protection Decorative Building Formwork Material and itsProduction MethodY. Li 517
Design and Implementation of Information System of 3D City of Geotechnical EngineeringQ. Luo 521
Research on the Application of Digital Technology in the Landscape DesignC.L. Yao 525
Design Light Environment Dining SpaceY.C. Xing and Y. Zong 529
The Selection of Commercial Residential Building Energy Saving Reconstruction ObjectResearchJ. Wang and Z.S. Yang 533
Research on Planning of Urban Plant LandscapeX.D. Zhou, H. Qi, Y. Qi, Y. Cai and L.H. Yang 537
Research on the Design of Community Landscape Planning under Eco-House PerspectiveX.D. Zhou, C.L. Zhao, Y. Qi, H. Qi and D.W. Jiang 541
Extension Method to Creative Design of Highway Rock Slope GreeningW.W. Zhu and Y.Y. Tan 545
Engineering Design and Recheck Computation of Trench-Buried Inverted SiphonY.L. Liu 549
Structure Design and Finite Element Analysis of Liujiaba Inverted SiphonD.Y. Ji 553
Interior Design Function of Computer-Aided SystemsS.H. Li 557
Study on Innovation of Indoor Spatial Curved Surface on WebY.J. Song 562
Chapter 3: General Mechanical Engineering, Applied Mechanics andManufacturing, Equipment
Research on the Geometry Nonlinearity of Wind Turbine BladeD. Tang, Z.L. Lu, B.B. Lv and T.Q. Guo 569
The Selection of Ceramic Dry Granulating Machine Spray Device Based on the DPM ModelN.X. Wu, T.T. Zhan and Z.T. Jiang 573
Analysis on Static Characteristics of Flipping Horizontal Machining CenterR. Shao, D.W. Yu, P.F. Feng and H.S. Jia 577
Numerical Simulation on Finned Heat Pipe under the Condition of ConvectionX.H. Zhong, T.T. Xue and C. Liu 582
Strength Analysis of Aircraft Accessory Gearbox ShellY.Y. Shi, N. Du, R. Yang, M.Q. Zhang and H. Sun 585
Motion of Transverse Shock Tester Guided by Parallelogram MechanismZ.D. Wen, M. Yan and L. Zhang 590
Strength and Movement of Flexible Plate Oriented Horizontal Shock Testing PlatformM. Yan, Z.D. Wen and J.Y. Du 595
Sensitivity Analysis of Measurement Parameters of Marine Inter-Cooled Gas Turbine withLow-Pressure Compressor FoulingX. He, Y.J. Li and Y.B. Liu 600
Design of Konjac Planting MachineY.M. Chen and X.R. Lv 604
Analysis and Improvement of Vacuum Dampening MachineZ.K. Li, M. Yu, Y.S. Zou, Y. Luo and G.Y. Liu 607
f Mechanical Engineering and Materials Science
Improvement of Drum Loose Dampening FeederZ.K. Li, Z.J. Wang, Y.K. Xu, S.Z. Wang and W.Y. Li 611
Nonlinear Dynamic Analysis of Drill String System for Horizontal Oil Well with DifferentPositions of StabilizersM. Zhao, X.Z. Zhu and C.L. Wang 615
Application of Variable Damping Hydraulic Buffer in Braking Large Mass Impact LoadingProblemZ.Y. Tang, G. Wu, J.Y. Lu, Y.F. Li and X. Li 619
Application of Improved Bingham Model in Braking Large-Mass Unidirectional ImpactLoading ProblemZ.Y. Tang, G. Wu, J.Y. Lu, Y.F. Li and R.F. Ma 623
Flow Field Theoretical Optimization and Experimental Verification of Centrifugal PumpY.S. Lin, Q. Zhang, L. Dai and X. Hu 627
Investigation on Power Transmission for the Isolation System Mounting on Plate-ShellCoupled StructureL. Dai, T.J. Yang, X. Hu and H.B. Ke 631
A Method of Parametric Design of Automobile Synchronizer Ring Based on UG SecondaryDevelopment ToolsH.Y. Cui, N. Tian, R.C. Li and X.H. Men 635
Multi-Stage Centrifugal Pump Impeller Hydraulic Model Modification and PerformanceAnalysisY.G. Xu and W.W. Song 639
A Study of Silt Erosion on Inner Buckets of Pelton TurbinesS. Wei, W.W. Song, F. Jie and C. Yong 644
Design and Research of Concrete Spraying MachineH. Song, H.W. Chen, N. Liu and C.J. Cao 650
Finite Element Analysis of one New Type Hybrid Bus FrameG.J. Liu, T.Z. Zhang, H.X. Yin, H.X. Zhang, L.Z. Zhang and B.M. Duan 654
Wire Tension Force Variable Universe Fuzzy Control in Fixed Abrasive Wire SawManufacturingW.B. Bi, P.Q. Ge and Y.F. Gao 658
Numerical Study of the Characteristics of Rotary Spool Orifice in Water HydraulicsJ.J. Wu, Y.S. Yang, J.Y. Li, G.G. Yu and Z.X. Jiao 662
Analysis on Contact Stress after Gear Meshing and Finite Element of StiffnessR.Y. Wu 670
Modal Analysis on the Simulation of the Missile Launchers Based on ABAQUSC. Huang, Y. Jiang and H. Zhang 676
The Thickness of an Aircraft Wing Skins Optimization Based on ABAQUSZ.R. Yang, Y. Jiang and C. Huang 679
Ellipsoid Reticulated Shell of Parametric Design and Analysis of Mechanical CharacteristicsX.Y. Lu, J. Xin, R. An, J.M. Liu, L. Wang and F.C. Liu 682
Analysis on the Parametric Design and Static Performance of the Hyperbolic ParaboloidShells with Rectangular ProjectionX.Y. Lu, R. An, S.B. Lu, L. Wang, J. Xin and F.C. Liu 686
The Machining Method of Numerical Control Lathe to Irregular Curve ProfileY.Q. Zhou, B. Wei and S.Y. Xue 690
Research on Key Energy Saving Techniques of Automobile PaintingQ.L. Zhang 694
Adjustable Cross Wheel Design and Experimental StudyL.B. Wu 698
Coupling Effect of Temperature Stress in Butterfly Valve Mechanical System Based onFLUENT Numerical SimulationX.Z. Wang, H.H. Zhu and Z.G. Liu 702
CNC Cylindrical Grinding Machine Reliability Analysis and OptimizationJ.W. Fan, X.L. Yi, C. Liu and Y.J. Liu 707
Numerical Simulation of Cold Swirl Field for Solid Fuel Ramjet with NACA AirfoilJ. Yu, X. Chen and H.W. Li 711
Applied Mechanics and Materials Vols. 716-717 g
FANUC CNC Lathe System Based on Macro Processing of Special CurvesS. Wu 717
Design of the Globoidal Cam Mechanism Based on MATLAB and CATIAC. Zhang and Z.H. Zhang 720
Flight Dynamic Characteristic Analysis of a Generic Airbreathing Hypersonic VehicleR.G. Yang, J.Q. Yu and Y.C. Shen 724
The Effect on the Stability of Rear Drive Vehicle with Viscous Limited Slip DifferentialL.Q. Jin, Z.W. Wang and D.X. Yin 730
Mechanism Analysis of Anchor Bolt and Cable Synergistic Action in Coal RoadwaySupportP. Cheng, J. Zhang and A.Q. Liu 735
Analysis of Stamping Residual Stress Influenced on Body StiffnessC.H. Han, Z.D. Qu and Y.L. Chen 739
Establishment of the Dynamics Modal for the Fire-Suction Hydraulic ImpactorZ.F. Bao, Y.Z. Zhang and J.P. Wang 743
Theoretical and Experimental Research on Matching of Cooling System Property ofHousehole Ice-Making MachineH.Y. Chen, J. Qu, F.Y. Cai and Y. Wu 747
Calculation on Crack Parameter by Extended Finite Element MethodB. Zhou, D.X. Wang and S.F. Xue 751
Analysis and Evaluation of Wind Turbine Flow Field and Noise Simulation Based on CFDSoftwareL.X. Weng, J.N. Xu and Z.X. Hu 755
The New Warhead Concrete Simulation ResearchJ.P. Wang, Z.H. Yuan and T. Han 760
Optimization Calculation of Javelin Throwing ResultsM. Jiang and J.H. Zhou 764
Analysis the Response of Aerated Flow Depth to the VOF ModelH.Q. Zhang, Y.L. Lou, Q. Zhao and W.K. Tan 767
Optimal Operation of Boiler Based on Anti-Balance AlgorithmX.W. Li 771
Research on Longitudinal Motion Prediction of Hybrid Monohull Considering Based onNumerical SimulationB. Tian, H.L. Ren and Z.Y. Dong 776
The Experimental Study and Numerical Simulation of the Gas Flow Field in the ColdStorage of Procambarus ClarkiiS. Li, S.C. Wang, F. Cheng and G.B. Xia 780
Analysis of Thermoelastic Damping in Bilayered Circular Microplate ResonatorsW.L. Zuo and P. Li 785
Study on Floating Roof Tank Nitrogen Lightning Protection SystemJ.J. Wen, B. Ding and L. Zhang 790
Attenuation for Multiple Scattering of Laser in Atmospheric AerosolsH.X. Wang, Q.H. Zhang and H.H. Sun 795
Design and Construction of Solar Absorption Refrigerator Using Organic Compound(R134a and Tetraethelene Glycol Dimethyl Ether)M.H. Jin 799
Advances in Ground Source Heat Pump Systems Applied in Most Areas of China: A ReviewX. Wang, H. Liu and D.D. Xue 805
Research on Design and Construction Issues of Oxygen Pipeline in Chemical PlantX.Y. Yang 809
For Retrofit Applications of Biomass Briquette Industrial BoilersC. Cheng, G.M. Fu, W. Lv and X.Y. Lin 813
Optimization Design for Beam Structures of Rail Weld CNC Fine Milling Machine Basedon Ansys WorkbenchH.J. Mao, M. Shu, C. Li and B.J. Zhang 817
Vibration Analysis of Transmission System on the Small Aquatic Harvesting MachineL.Z. Zhang, Y.H. Lei, J.L. Kang and Q. Yang 825
h Mechanical Engineering and Materials Science
Review of Soil Temperature Recovery Characteristics of the GSHP SystemD.D. Xue, X. Wang and Z.W. Cheng 829
Influence of Front Wheel Alignment Parameters on Handling Stability of Vehicle Based onJoint SimulationH. Wang and X.Z. Wang 832
The Simulation Model Establishment of Single Trailing Arm Suspension Vehicle Based onADAMSH. Wang and X.Z. Wang 837
Chapter 4: Measurements, Instrumentation, Testing, Monitoring,Analysis and Detection Technologies
Coal-Rock Interface Identification Method Based on Dimensionless Parameters andSupport Vector MachineY.M. Li, E.M. Liu, G.H. Xue and W. Miao 843
Research on Broken Filament Detection Method of Silk ProductC.N. Yang and X.B. Sun 848
Research on Jumper and Connector Detection of Silk ProductsC.N. Yang and X.B. Sun 851
Detection of Demagnetization Fault in Interior Permanent Magnet Synchronous Motors forEV Based on UKFT. Chen 854
Research on SVDD Network Intrusion Detection of the Optimal Feature Selection forParticle SwarmX.Y. Zhang, Z.W. Wei and X. Lin 860
A Study on the Key Technology of the Online Measurement Device for Joint InternalThreadQ. Zhou and Z.Q. Shuang 864
The Research on the Target Tracking of Infrared and Wireless Temperature MeasurementSystemF. Liu, G. Wang and Y.Q. Wang 871
Analysis of Influence on Seawater Electric Field Measurement by Sphericity SensorX.B. Wang, L. Xia, X.J. Wang and D. Ji 876
Temperature Measurement System Design Based on LonWorks Power LineCommunication TechnologyK. Ma, W. Ling and X.R. Kong 880
A Kind of Gas Density Monitor System Based on CC2530Z.D. Li, Q. Guo, Y.X. He, K. Tu and Y. Wei 884
Design of Gas Density Monitor System Based on Wireless Sensor NetworkZ.D. Li, G.H. Feng, X. Feng, Q. Sun and S.L. Cheng 888
Development of Defect Detection Algorithm in Cellular Denitration CatalystL.R. Chen and E.H. Zheng 892
Design of the Embedded RLC Measurement ModuleJ. Chen, L.L. Bao, Y.Y. Yu and F. Ding 898
A Simple and Sensitive Method of Monitoring Crack and Load in Three-Point BendingFracture Mechanics Specimens Using Strain GagesX.P. Zhang, Y.Q. Chen, H.N. Xing, L.Q. Jin and D. Li 902
Remote Rainfall Monitoring System Based on GPRSW.B. Liu, T. Wang and Y. Liu 907
Research on Mine Water Quality Monitoring System Based on SOPCR. Wang, K.Y. Zhang and L. Zhang 911
The Design and Implementation of the Rice Lesion Identification SystemS. Qiao 915
Passive Automotive Electronic Identity Pavement Covered Blind Area Problem AnalysisX.N. Li 919
Fault Signal Detection System of Large Scale Integrated Circuit Based on Single ChipMicrocomputerX.Y. Li, C.P. Liu and R.F. Mei 924
Applied Mechanics and Materials Vols. 716-717 i
Parallel Measurement Based on Laue EffectM.H. Yang 928
Infrared Image Simulation of Ground Maneuver Target and Scene Based on OGREC.P. Mu, M.S. Peng, Q.X. Dong, X. Gao and R.H. Zhang 932
Fast Face Detection Based on AdaBoost and Canny OperatorsL. Zhang 936
The Design of Bearing Monitoring System Based on Acoustic Emission SignalK. Huang, Z.K. Bu, C. Zhang and H.L. Xie 940
Characterization Method of Radar for Air Surveillance CoverageW.Q. Wu, S.S. Tian and T. Liu 944
Fault Diagnosis Based on Vibration Signal of Rotating MachineryW.W. Zhang, N. Li and Y.F. Ma 949
Research on Automatic Identification of MCS Based on Infrared Satellite Cloud Image ofFY2DL. Duan, J.J. Wu and F. Liu 954
A Kind of Multi-Functional Wall Surface Nondestructive Testing DeviceJ.W. Fan, Y.J. Liu, L. Chen, S. Ji and S. Yuan 958
Design and Development of a Resistive Grain Moisture MeterW.P. Wang 961
The Wireless Monitoring System of Shipbuilding Gantry Cranes Based on S3C6410Y.P. Tang, H.B. Wu and H.L. Liu 965
An Error-Detecting System of Books Based on Two-Dimensional Code ScanningH.Z. Xu 970
Error Items Analysis of the Cantilever CMM with REVO AppliedH.T. Zhang and S.G. Liu 974
Research on Digital Baseband Converting Methods in Interference Measurement SystemX.M. Hou, S.J. Wei and X. Lian 978
Aerocraft Real-Time Measured Data Processing Method Based on Combined FilteringY. Li, H.J. Liu, G.L. Bian and M.H. Liu 983
Research and Design of Abnormal Sound Online Monitoring and Positioning System forSubstation EquipmentX.H. Tang, F.Y. Zhu, X.F. Gao, J.W. Qian and X.X. Wang 987
Design and Optimization of the Sensor Gear Set in EPSJ. Ma and J. Wang 992
Calibration Error Analysis for Six-Axis Force Sensor Used in Docking SystemS. Lin, L.X. Zhang, J.M. Shao and C.F. Zhang 998
An Indoor Air Quality Manager Based on the Smart Mini-CarH. Luo, L. Gao, X.Y. Ye, T. Jing, N. Wang, N.J. Jin and X. Yue 1002
The Adjacent Vehicle Coordination System on the ExpresswayF.Z. Zhang, H. Jiang and Y. Lv 1006
Development of Sensor and Application of Biologic SensorE.Y. Tang 1012
Finite Element Modal Analysis and Size Optimization of Annular Piezoelectric ResonatorX.W. Liu and C.Y. Liu 1016
Frequency Spectrum Estimate Based on FLOS in Various Radar Clutter NoisesEnvironmentsP. Li, H.C. Xie, H.B. Wang, J.B. Long and D.F. Zha 1021
Force Acquisition for Impact TesterG.H. Han and T.L. Shi 1026
Development of Portable NIR Spectrum Acquisition and Analysis SoftwareC.L. Liu, S.L. Dou and Y.J. Hu 1034
RFLP Analysis of Soil Microbial Diversity Chromium Contaminated Soil RemediationProcessJ.P. Yang, F. Lu, J.M. Luo and J. Chen 1039
New Method of Optimal Deployment of Radar NetworkY.J. Cui 1043
A New Imaging Method for Circular Trace Scanning SAR with Wide ObservationH. Jiang, M. Han and H.C. Zhao 1047
j Mechanical Engineering and Materials Science
Optimal Design of Sensitive Structure in Gas Pendulum Tilt SensorY.H. Zheng, S.L. Peng and H.W. Wang 1051
A Method for Designing Low Peak to Average Power Cognitive Radar WaveformX.M. Wang, C.Y. Wang, Y. Chen, Y.X. Yu and H.Y. Sun 1055
Study on the Design Method of Ocean Bottom Seismometer Based on Field SourceCharacteristics and Coupling TheoryP. Cui and Y.C. Wu 1060
Soil Moisture Inversion Based on AMSR-E and MODIS Data Fusion: A Case Study ofHuaihe River BasinJ.W. Xu, Y.P. Wang, J.F. Zhao, F.Y. Pu and P. Wang 1064
Temperature and Humidity Measuring System Based on ZigBee and GPRSM.F. Gong, F.J. Yin, Q. Gu, B.Y. Song and Y.J. Yu 1068
Research on Miniature Bio-Mimetic Robot Detection System for Gastrointestinal Tract andMotion CompatibilityC.F. Zhang, H.W. Chen, B.Y. Wang and Y.Z. Fan 1072
Research on the Temperature and Humidity Environmental Testing & Analysis of ClosedBreeding Plant SystemW.X. Yang, B. Hu and C.W. Ma 1076
A Finite Element Analysis on SAW Sensor for Torque MeasuringL.J. Wang and Y.T. Zhang 1080
Flight Tests Data Processing in Engineering for Light Aircrafts Take-Off PerformanceX.M. Yu, H. Zhang and W.J. Zhao 1084
Research on Automatic Tracking of MCS Based on Infrared Satellite Cloud Image of FY2DL. Duan, J.J. Wu and F. Liu 1089
Chapter 5: Electronics and Microelectronics, Embedded and IntegratedSystems, Communications and Signal Processing, Power and Energy,Electric and Magnetic Systems
Design of SVG Application in MicrogridsD. Ba, L. Feng and Y.Q. Li 1095
8PSK Signals with 50% RZ Clock for Optical Access System Applications Using PhaseEqualization Technique in MSPEY.F. Shao, S.K. Wang, A.R. Wang, S.L. Shen, L. Chen and F.P. Chen 1099
The Sensitivity Analysis of Power Loads and Meteorological Factors in Typhoon WeatherJ.C. Hu, Z.X. Fu, S. Jiang and Y.J. Zhang 1103
Droplet Mobility Actuated by Surface Acoustic WaveY.G. Li and J.F. Zhang 1108
Acoustic Field Calculation of Ultrasonic Phased Array Concave Cylindrical TransducerL.J. Wang and S. Li 1111
Simulation-Based Performance Degradation Prognostics of Electro-Hydraulic Servo ValveZ.T. Zhao and J.B. Guo 1114
Research on the Orthogonal Test of Spot Welding Parameters of Power Battery PacksJ.D. Yang, C.L. Tian, H.Y. Hu and H. Yan 1118
Protecting Distance of Scattering between DC Transmission Line and Receiving Station ofAMX.F. Liu, J.G. Zhang, Z.Y. Gan and B. Tang 1123
The Short-Term Reliability Assessment of Distribution Network Based on ConditionsDependent Element Failure RateG.X. Yuan, S. Lin, Y. Xu, C. Zhao, L. Dong and K.W. Liu 1130
Analysis and Governance of Hoist Converter Harmonic Based on Improved HHTJ.Y. Zheng, Z.B. Li and L.Z. Zhang 1136
Discussion on Active Television Interference Characteristic of UHV AC Transmission LineH.C. Xie, J.G. Zhang and Z.Y. Zhou 1139
Development and Implementation of SVPWM Three-Phase InverterC.L. Dong and L.J. Zhu 1144
Applied Mechanics and Materials Vols. 716-717 k
Research of the Effects of On-Grid Distributed Generation on Traditional DistributionNetworkD.M. Zhao and X. Wang 1148
A Comprehensive Dispatch Management System for Distributed Generation Based onCloud-Computing TechnologyJ.X. Zhang, Y. Zhang, Z.H. Cao, J.S. Liu and X.X. Gu 1156
Study on the Characteristics of Low-Frequency Vibration of the Core of Single PhaseTransformer Set Caused by GICX.R. Pei and L.G. Liu 1162
Research on the Alarm Device Based on the Expert Control AlgorithmL.X. Liu and W.J. Zhang 1168
Adaptation Evaluation Method of Distribution Network to Accept Distributed GenerationsY. Hui, X. Wang, D.M. Zhao, J. Su, P. Wang and H.T. Liu 1172
Analysis on the Impacts of Different Distributed Generation Grid-Connected Modes onPower QualityP. Wang, Z.Y. Ren, D.M. Zhao, W.X. Sheng, H. Yu and H.T. Liu 1180
Design of Low Voltage High Current DC-DC Converter Based on TPS54810A. Wang, W.G. Wang, R. Wu and Q. Zhang 1185
A Research on Effective Communication Distance for Surface Wave PropagationJ.W. Li, H.D. Quan and P.Z. Cui 1189
Effect of Antenna Layout on the Capacity of Massive MIMOX.Y. Li, X.F. Zhang, D.Z. Xu and Q.M. Zhu 1194
Transplantation of U-Boot on NAND Flash Based on S3C2440 ProcessorP. Zhang, Z.W. Peng, J.W. Lv and Z.Y. Ding 1199
Design and Implementation of Speech Navigation System Based on AndroidL.P. Yang, W. Wang and D.W. Xu 1203
Design of Multi-Route Intelligence Electric SystemL.J. Wang and P.J. Zhang 1207
Research on the Failure Characteristics of Porous Ceramic Capacitor Based on NumericalSimulation TechnologyY. Chao 1212
A New Index to Evaluate the Severity of Discharges Based on Energy CalculationX.Y. Lu 1217
Research on the Mathematical Model Construction and Algorithm of Dynamic ReactivePower Optimization about Distribution NetworkK.Y. Zheng 1221
Realization of Automatic Power Control in HVDC Control and Protection SystemR. Zhang, Y.H. Shen, C. Yu, F.L. Li, K.W. Pang and L. Zhang 1226
Design of Voice Communication System Based on the ZigBee Technology for Power PlantC.W. Xue 1230
Encoding and Decoding Schemes for MIMO System Combined with Convolutional CodeJ. Geng 1234
Multi-Bit Flip-Flop Replacement Method Optimization and Synthesis ImpactA.J. Wang and Y.Z. Fu 1239
Research on Interference Model of Cooperative Cognitive Radio Networks over RayleighFading ChannelJ. Li and S.H. Li 1244
Realization of Programmable Analog Circuits with Digital PotentiometerG.J. Zhou, J. Cheng and L.J. Qi 1248
Adaptive Algorithm for Anti-Jamming in Broadband CommunicationJ.H. Cui and N.P. Cheng 1252
Design of Mobile Communication Non Intersymbol Interference System Based on CalmanFilter and PID ControlC.C. Huang, L.J. Yu and L.H. Sun 1257
Mobile Communication Inter-Symbol Crosstalk Cancellation Based on Calman DigitalEqualizer FilterL.H. Sun, C.C. Huang and L.J. Yu 1262
l Mechanical Engineering and Materials Science
Simulation Design on Kalman Filter with Mobile and No-Intersymbol Interference SystemBased on MATLABL.J. Yu, L.H. Sun and C.C. Huang 1267
Design of Voice Signal Visualization Acquisition System Based on Sound Card andMATLABY.P. Wei and H.L. Xiao 1272
A Design of Powered Device Interface Chip under PoE SystemL.F. Qi, Z.H. Ning and L.N. He 1277
An Improved Adaptive Beamforming Method for Spatially Non-Collocated Vector SensorArrayX.L. Dong, H.Y. Li and L. Wang 1283
Optimum Design Algorithms and Simulation Analysis of Power Transmission NetworkBased on EPOCHSL. Hui 1288
An Analog-Digital Clock DLL Control Circuit Used for High-Speed High-ResolutionDigital-to-Analog ConverterT.H. Li, R.T. Zhang, W.D. Yang and G.B. Chen 1293
A New Method of Doppler Frequency and DOA Estimation Based on Gradient-Time-DelayH.Y. Sun, C.Y. Wang, Y.X. Yu, Y. Chen and X.M. Wang 1298
Research of the VLF Atmospheric Noise Statistical PredictionG.M. Li, C.J. Li and Q.N. Li 1303
Research on the Effects of Iron Loss to the Maximum Wind Power Point TrackingH. Xiao, G.G. Gao, X.W. Zeng and Z.Y. Pei 1308
Energy-Efficient Resource Allocation in CoMP Systems with Backhaul CapacityConstraintsQ.W. Wan, X.M. Wen, Z.M. Lu, H.J. Zhang and J. Zhao 1312
Potential Function for Acoustic Multipole Logging on Guided Waves in TransverselyIsotropic MediumL. Zhang, G.H. Wang and J.J. Lu 1318
An Improved Sensor Positioning for Wireless Sensor NetworksJ.T. Lin, G.Y. Fan, W.H. Liu and Y.D. Hu 1322
Simulation on the Temperature Properties of EAST Lower Hybrid Wave AntennaJ. Li, F.K. Liu, T.J. Liu, C.X. Guo and X.Y. Ying 1326
Development of RFID Reader System Based on AndroidJ.H. Chen and Q.J. Li 1330
The Pulse Signal Preprocessing and Feature Points Recognition Based on MATLABL.Y. He, M.S. Liu and Q.Y. Chen 1334
Application of Halcon in Digital Image and SignalY.M. He, Y.Q. He, G.Y. Xiong and M.F. Zhu 1338
Improvements of Infrared Touch Screen Calibration Algorithm Based on AffineTransformationW.M. Guo and G. Wang 1341
Nine-Dimensional Eight-Order Chaotic System and its Circuit ImplementationJ.L. Zhu, J. Dong and H.Q. Gao 1346
Realization of Digital Chaotic Signal Generation CircuitsH.Q. Gao, Y.J. Wang, S.Q. Kang, Z. Le, J.Q. Wang and J.J. Wei 1352
PWM Based DC-DC Converter Design with Feedforward Voltage for a Fuel CellJ.M. Xiao, W.T. Zhang, S.J. Wen and D.Y. Wang 1356
Feedback Network Applied in Frequency Locking of Resonator GyroX.Q. Jiao, X.L. Wang, J.B. Chen and Y.Q. Zheng 1360
The Application of Multi-Functional Portable Field Electric Check TerminalK.A. Hou, L.X. Yang, L. Fan, H.P. Ding and D. Yu 1367
Sensing System of Environmental Parameters Based on SMS ModuleF. Yang, Q.J. Wang and Y.F. Gan 1371
Simulation Study on Decoupling Control of Active and Reactive Power in Doubly FedInduction GeneratorB.L. Zhang 1376
Applied Mechanics and Materials Vols. 716-717 m
Digital Hardware Design Formal Verification Based on HOL SystemD. Xiao, Y.F. Zhu, S.L. Liu, D.X. Wang and Y.Q. Luo 1382
Design of a New Digital Dual MCU SynchronoscopeG.D. Xu and Z.L. Wu 1387
Research on FBG Temperature Sensing NetworkK.X. Liu 1391
Research of Adaptive Control Bi-OADM in Passive Optical NetworkK. Yang, M. Zhang and Y.J. Yue 1395
Using Artificial Neural Network to Execute Demand Response Considering Indoor ThermalComfort and Forecast Load-SheddingY.C. Chang, J.T. Lu, Y.C. Liu and C.H. Wang 1399
Dispatching Technology Application in India Large Scale BlackoutJ.Y. Sui, M. Zhao, W.Y. Zhou and P. Jin 1409
Realization and Design of SMS Alarm System in Satellite TT&C Ground StationT. Zhang, W.G. Li and Y.C. Li 1413
Study of TD-LTE Coverage and Uplink/Downlink Power Budget in High-Speed TrainQ. Hou, Y.F. Zhou, X. Peng and L. Zhang 1417
Design and Realization of Smart Home System Based on Wireless Sensor NetworksY. Ruan 1421
Performance Verification of MIMO Technology in WLAN System and Diversity Gain IssueY.H. Zhu and C. Shen 1425
A Method Based on Hash Table to Implement the NAS Layer Decryption in LTE Big DataPlatformT. Zheng and Z.Z. Zhang 1430
Fabrication and Characterisation of 1200V 4H-SiC VJFETG. Chen, S. Bai, A. Liu, R.H. Huang, Y.H. Tao, L. Wang, Y. Li and Z.F. Zhao 1434
The Modeling of Solar CellsC. Li and S.Q. Zhou 1438
Anti-Collision System on Embedded Visual Distance Measurement Based on ARMW.R. Yang, C.H. Liu and K. Shuai 1442
Study on Pre-Processing Method and Software Platform Development for Three-Dimensional Finite Element of Electric Transmission Lines Based on Solid ModelingZ.H. Liu, Y. Lu, H.C. Xie, J.G. Zhang, H. Wan, Y.L. Chen and R. Huang 1446
Positioning Technology Research of Mobile Vehicle GroupS. Ge and Y. Piao 1451
Chapter 6: Mechatronics, Robotics, Automation and Control
Design of Automatic Thermostat Control System for Substation Inspection RobotY.Q. Luan, W. Yang, P. Xiao, Z.F. Ma and H.P. Wang 1457
Design of Mechanical Structure & Control System of a Lower Limb Rehabilitative RobotX.H. Shi, Y.S. Lu, H. Lu and H.B. Wang 1461
Energy Optimization of the Wire Part Driven by Three Different Motors in Paper MachineF.L. Yao and C.Y. Cao 1465
Design and Simulation of In-Wheel Driving System with Two-Speed TransmissionJ.D. Shi and K. Song 1470
The Application of Emotional Design on Service RobotsD.S. Song, Y.X. Huang and S.W. Cheng 1476
Gas Control Technology in Heading Laneway Based on Gas Migration CharacterS.F. Wang, Y.M. Zheng and J.C. Zhang 1481
Chaos Generation of Induction Motor Based on Time-Delayed State Variable FeedbackJ. Wang 1486
Study of Electricity Powered Four-Wheel Steering System Based on Fuzzy Neural NetworkW.D. Li and Y. Zhang 1494
Study of Building Automation Systems EngineeringR.S. Lv and R. Yang 1500
n Mechanical Engineering and Materials Science
Modeling and Simulation for Anti-Lock Braking System (ABS) of Automobiles Based onSimulinkT. Gong, H. Yan and P.F. Liu 1504
Design of Control System for Automatic Welding Machine for Battery Packs of New EnergyAutomobileH.Y. Hu and J.D. Yang 1508
Backward Path Tracking of Mobile Robot with Two TrailersY. Ma, Y. Zhang, J. Cheng and Q.J. Zhao 1512
The Analysis on Manufacture Cost of Fire Robot Based on Modular DesignS. Fang, Y. Xu and F. Dong 1518
Application of Man-Machine Isolation Automation Assembly for Industrial ElectricDetonatorH.J. Li, J.J. Yan, L. Yan and W. Chen 1522
Control System Designed for a Four Rotors Unmanned Aerial VehicleW.M. He, G.J. He and J.Q. Zhang 1527
Parameters Tuning and Performance Analysis of PID Controller for Gas Tank PressureJ. Zhang, S. Zhang and Z.H. Dan 1531
The Analysis on Suspension of Fire Robot Based on FEAY. Xu, S. Fang and J.Q. Fu 1536
The Speed Control Design Based on Fuzzy LogicT. Gong and H. Yan 1540
Manufacturing Accuracy Control of Precision Machine Tool Based on Taguchi MethodC.L. Wang, Q.C. Sun, X.K. Mu and B.W. Shi 1545
Research on TSC Type Reactive Power Compensation Control System for Coal Mine Basedon STM32P.P. Yang, C.L. Dong and Y. Wang 1551
The Simulation and Analyses of Timing-Optimal Trajectory Planning for 6DOF RobotZ.J. Gou 1555
Design of the Automatic Spraying Equipment for Tubular PartsJ.C. Dong and C. Zhou 1559
Design of Intelligent Traffic Light Control System Based on Multi CPUW.L. Wu 1562
Aviation Flight Attitude Control TechnologyJ. Hu 1567
Synchronization Controller Design for Chaotic System with Input Sampled-Data MissingT. Ren, Q. Zhang, M.Q. Tang and Y.F. Yang 1572
The Combined Simulation of High-Speed Parallel Manipulator Based on MATLAB,SolidWorks and ADAMSZ. Zhen, C.Y. Liu, Y.K. Zhang and C.M. Hao 1578
Dual Closed-Loop Electric Power Steering System on the Mixed H2/H∞ Control StrategyW.Y. Wei, J.Y. Chen and H.L. Li 1582
Based on PLC the Automatic Constant Pressure Control Water Supply System DesignX.L. Mo 1587
Design of the Intelligent Control System Integration of Wastewater TreatmentW.H. Chen, Q. Cai and X. Wang 1591
Pneumatic High-Pressure Mud Pump Based on PLC ControlY.H. Xu and C.S. Zhu 1595
Modeling and Simulation of Mechatronic Technology Based on Intelligent Network ControlZ.X. Hu, J.N. Xu and L.X. Weng 1599
Design of Multi-Intelligent Robot Wireless Communication System Based on ZigBeeAutomation ControlJ. Chen and H.G. Xiong 1604
Fuzzy Fractional Order Proportional Integral Controllers for UAV Lateral AttitudeControl SystemY.D. Liu, C.Y. Wang, M.Q. Li, C.J. Tian and D.Y. Bai 1609
Robust Fractional Order Proportional Integral Control for Large Time-Delay SystemR.H. Xin, C.Y. Wang, X.L. Liu, M.Q. Li and D.Y. Bai 1614
Applied Mechanics and Materials Vols. 716-717 o
Optimization of Fractional Order Controller ParametersP. Zhang, P. Li and Q.R. Li 1620
Robust Gain-Scheduling Controller for Airbreathing Hypersonic Flight VehicleY.C. Shen, J.Q. Yu, G.C. Luo and R.G. Yang 1624
Estimate the Size of the Moving Vehicle LWH Based on Machine VisionJ. Wang and T.Q. Li 1631
Design of an Intelligent Lighting Control SystemH.Y. Yang and D.X. Cui 1636
A Study on Outdoor SVG Overheat Capacity Reduction Control StrategyC.Y. Bai, Y.N. Wang, Z. Ren and S.H. Wang 1639
The Analyse on Stiffness Model of 3-PPSR Flexible Parallel RobotY.L. Luan, W.B. Rong and L.N. Sun 1643
Control for Grid Connected Inverter under Unbalanced Grid Voltage Based on PI-QRControllerJ.J. Pan, Y.C. Liu, C. Wang and Q.J. Zhang 1648
Research on a Gantry Robot Based on PLCA.I.I. Mahir and S.P. Deng 1654
Application of Active Disturbance Rejection in Main Steam Temperature Control ofThermal Power PlantD. Wang and R.B. Zhu 1658
Optimization Design of Fuzzy Control Rules Based on Ant Colony AlgorithmY.L. Xing, H. Xin and J.C. Zhao 1662
Mechanical Cutting Process of Cutting Robot Based on CAD/CAM Integrated SystemJ.N. Xu, Z.X. Hu and L.X. Weng 1666
Computer Control Software Design Model Based on Improved PID AlgorithmX.J. Qian, G.X. Hu, Q.L. Fu and B. Yang 1671
Using Image Registration Method to Register UAVY. Zhang, J.Z. Li, P.P. Jiang, Y.L. Du and S.F. Gong 1675
Study of the Time-Delay System with Integral-TypeD.Z. Wang, S.J. Wu and T. Akiyama 1680
Analysis of the Reactive Power Control Strategy Based on Improved Particle SwarmAlgorithmZ. Yu 1684
Flight Attitude Sliding Mode Control Design Based on the Compensation of Extended StateObserverH.L. Xing and J. Li 1689
Fuzzy Nonsingular Terminal Sliding Mode Control for Attitude of Flapping Wing MicroAerial VehicleS.B. Hu, J.F. Yin, H.J. Liang and H. Liu 1694
Temperature Optimal Control Model Design of the Metal Material SmeltingZ.Y. Wu 1699
Study on Application of Expert Systems in PID Thermostatic ControlX.K. Yang 1703
Research on the Cooling System of High-Speed Motorized SpindleC.L. Lei, Z.Y. Rui, T. Li and Q. Wu 1707