TENUTE SETTORE NAVALE MECHANICAL SEALS FOR NAVAL SECTOR
MICROTEM Via Valdilocchi, 6 - 19126 LA SPEZIA · ITALY Tel.
+39.0187.984276 · Fax +39.0187.911318
[email protected] · www.microtem.it Made in Italy
TENUTE MECCANICHE ASSE ELICA · STERNTUBE MECHANICAL SEALS
900
901 400
The MTM900 series, designed and produced from the diameter 35 mm (1
3/8” inches) to the diameter 200 mm (8” inches), is an innovative
product that provides high capacity to compensate for angular,
axial and radial misalignment. Realized for the market of small and
medium-sized
vessels, it is a more high-tech alternative to the rubber bellows
seals market. The design of the MTM900 series is standardly
manufactured in technopolymer which guarantees not to have problems
of wearing, drilling or fire to which instead the rubber is subject
. Being all components of the seal made by CNC machines, we can
produce the MTM900 of any size and material. Thanks to the pre-load
system, the mechanical seal is
easy to install and does not require additional controls. In
addition to the connection hole for the lubrication with water,
other holes (optional) can be added, on which the sensors can be
connected in order to control the flow, the pressure, the water
temperature and the axial and radial vibrations The MTM900 series
can be provided in several versions:
MTM904, with the sliding rings in two halves; MTM905, with the
sliding rings in two halves and with the pneumatic barrier system
(Watershield®) integrated; MTM908, with the pneumatic barrier
system (Watershield®) integrated. MTM909, with the pneumatic
barrier system (Watershield®) integrated and with the body of the
seal completely designed in two halves. The “two halves repair
kit”, which is available for the
versions with the Watershield® and with the sliding rings in two
halves, ensures the reduction of the tripping time and of the cost
by operating directly in water and without moving any of the
components of the propulsion line. It is particularly essential in
the V-Drive propulsion systems. Thanks to the FEM simulation
technology and to the
tests performed both in the laboratory and into the sea, the MTM900
Series guarantees the achievement of performance exceeding 25,000
hours of continuous operation. The recreational marine has never
been so safe and simple.
La serie MTM900, progettata e realizzata dal diametro 35 mm (1 3/8”
inches) sino al diametro 200 mm (8” inches), è un prodotto
innovativo che assicura un’elevata capacità di compensazione ai
disallineamenti angolari,assiali e radiali. Realizzata per il
mercato delle piccole e medie
imbarcazioni, si candida come alternativa, a più alto contenuto
tecnologico, al mercato delle tenute con soffietto in gomma. La
MTM900 è realizzata, di serie, in tecnopolimero che
garantisce di non aver problemi di invecchiamento, di foratura o di
incendio a cui invece è soggetta la gomma.
Realizzata totalmente da macchine CNC, possiamo costruire MTM900 di
qualsiasi dimensione e materiale. Grazie al sistema di precarico
integrato nella tenuta,
risulta di facile installazione e non richiede controlli
aggiuntivi. Oltre al foro di connessione per la lubrificazione con
acqua, possono essere aggiunti altri fori (opzionali) a cui poter
connettere la sensoristica per il controllo del flusso, della
pressione, della temperatura dell’acqua e delle vibrazioni assiali
e radiali. La serie MTM900 è prevista in più versioni: MTM904
con
anelli striscianti in due metà; MTM905 con anelli striscianti in
due metà e sistema pneumatico di sbarramento (Watershield®)
integrato; MTM908 con sistema pneumatico di sbarramento
(Watershield®) integrato; MTM909 con sistema pneumatico di
sbarramento (Watershield®) integrato e corpo della tenuta
totalmente in due metà. Per le versioni con anelli striscianti in
due metà e
Watershield® è disponibile il “two halves repair kit” che
garantisce la riduzione del tempo di intervento e del costo
operando direttamente in acqua e senza dover muovere nessuno dei
componenti della linea di propulsione. Particolarmente essenziale
nei sistemi di propulsione “V-Drive”. Grazie alla tecnologia di
simulazione FEM, ai numerosi
test compiuti in laboratorio e direttamente in mare, la serie
MTM900 garantisce il raggiungimento di performance superiori alle
25.000 ore di funzionamento continuativo. Il diporto non è mai
stato così sicuro e semplice.
COMPANY PROFILE Microtem è un’azienda Italiana specializzata
nella
progettazione e costruzione di sistemi di tenuta dinamici. Fondata
nel 2005 si è evoluta in tutti questi anni concentrandosi
sulla tecnologia, la ricerca di materiali all’avanguardia e sul
valore delle persone che la costituiscono. In Microtem l’obiettivo
è quello di fornire componenti di alta
qualità, un servizio di elevata professionalità, dando ai nostri
clienti la tranquillità di potersi concentrare sul loro business.
Responsabilità è il basamento su cui si fonda Microtem.
Viene, infatti, affidato ai nostri prodotti, determinare il
risultato finale delle produzioni dei nostri clienti. Sia che si
parli di una piccola pompa per acqua o di una nave transoceanica,
la nostra responsabilità è quella di produrre componenti che
possano garantire un vantaggio competitivo. Siamo partner da anni
di produttori di pompe, compressori
(aria e gas), agitatori, mixer , turbine ed inoltre, il punto di
riferimento dei più grandi e famosi cantieri mondiali di yachts e
mega-yachts. Lavoriamo in tutti i settori in cui le tenute
meccaniche
trovano applicazione come quello Industriale, OIl & Gas,
Energetico, Alimentare, Navale e Militare. La combinazione delle
specificità di tutti questi settori, ci ha permesso di comprendere
a fondo i nostri prodotti. Pur essendo molto giovani, oggi Microtem
vanta una rete di
Distributori Ufficiali che copre America, Asia ed Europa, che crede
in noi e nella gamma di prodotti offerti. Nel Dicembre 2016 ci
siamo trasferiti in una nuova sede
produttiva, situata a 300 metri dal porto di La Spezia, dove, in
accordo con la nostra filosofia aziendale, abbiamo creato spazi
dedicati alla ricerca e sviluppo, ai test condotti in una delle più
avanzate sale prove per le tenute meccaniche.
LA NOSTRA MISSION Ricerca e sviluppo, qualità elevatissima,
processi produttivi
automatizzati, passione, responsabilità e rispetto del cliente:
queste sono le parole chiave e i valori Microtem. Crediamo nella
tecnologia e la sfruttiamo interamente nella ricerca di prodotti
che garantiscano elevati standard qualitativi. Risolvere un
problema, condividere la nostra conoscenza tecnica è il fondamento
su cui ruota tutta la nostra attività. Ambiamo ad essere un partner
con cui condividere un percorso fatto di fiducia, competenza e
lealtà.
LA NOSTRA VISIONE Essere il punto di riferimento del settore,
sognando di
creare nuove tecnologie, lasciando un impronta e regalando ai
futuri progettisti elementi con cui continuare un progresso capace
di migliorare non solo l’efficienza delle macchine, ma soprattutto
la vita di chi le utilizza. I vostri prodotti sono il forziere che
grazie alle nostre chiavi, terremo al sicuro per sempre.
COMPANY PROFILE Microtem is an Italian company specializing in the
design
and manufacture of dynamic sealing systems. Established in 2005, it
has evolved over the years focusing
on technology, on the search of cutting-edge materials and on the
value of its people. In Microtem, the goal is to provide
high-quality components,
a service of high professionalism, giving our customers the peace
of mind to concentrate on their business. Responsibility is the
base on which Microtem is based. It
comes in fact, entrusted to our products, to determine the end
result of our customers’ productions. Whether it’s a small water
pump or a transoceanic ship, our responsibility is to produce
components that can grant a competitive advantage. We have been
partnering with manufacturers of pumps,
compressors (air and gas), agitators, mixers, turbines and,
moreover, the reference point of the world’s largest and most
famous yachts and mega yachts. We work in all sectors where
mechanical seals can be
applied such as Industrial, Oil & Gas, Power, Food, Naval and
Military. The combination of the specificities of all these sectors
has enabled us to fully understand our products. While being very
young today, Microtem has a network of
Official Distributors covering America, Asia and Europe, who
believes in us and in the range of products we offer. In December
2016, we moved to a new production site,
located just 300 meters from the port of La Spezia where, according
to our business philosophy, we have created spaces dedicated to
research and development, and to tests conducted in one of the most
advanced Test room for mechanical seals.
OUR MISSION Research and development, high quality, automated
production processes, passion, responsibility and customer respect:
these are the keywords and the Microtem values. We believe in
technology and we exploit it entirely in the search for products
that guarantee high quality standards. Solving a problem and
sharing our technical knowledge are the pivot on which our entire
business rotates. We want to be a partner to share a path of trust,
competence and loyalty.
OUR VISION Being the point of reference for the sector, dreaming
of
creating new technologies, leaving a permanent mark and giving
future designers elements to make progress that can improve not
only the efficiency of the machines, but above all the lives of
those who use them. Your products are like a chest which will be
kept safe forever thanks to our keys.
M TM
90 0_
Fl ye
r- R
ev .0
6/ D
ec .2
01 7
900 SERIES TENUTA MECCANICA ASSE ELICA · STERN TUBE MECHANICAL SEAL
VERSIONI ALTERNATIVE · ALTERNATIVE VERSIONS
Tutte le dimensioni possono essere personalizzate su richiesta -
Remarks: other shaft sizes (d1) on request · other stern tube sizes
(d3) on request · All dimensions can have customizations on
request
Tenuta meccanica con sistema idraulico di sbarramento integrato
nella flangia stazionaria e anelli di contatto in versione “semi
split”. VANTAGGI: economica, facile da montare, grazie al kit di
manutenzione in due metà, permette di poter compiere la revisione
della tenuta meccanica direttamente in acqua e senza muovere nessun
componente della linea di propulsione. Nessuna esigenza di
cantiere, nessun fermo temporale.
Mechanical seal with a hydraulic barrier system integrated in the
stationary flange and with sliding rings in “semi split” version.
ADVANTAGES: Economical, easy to assemble, thanks to the maintenance
kit in two halves you can perform the mechanical seal recondition
directly in the water and without moving any component of the
propulsion line. No need for a yard, no waste of time.
Tenuta meccanica con sistema idraulico di sbarramento integrato
nella cassa stazionaria direttamente prima del tubo astuccio.
VANTAGGI: economica, facile da montare, consente di aumentare la
sicurezza di bordo anche sulle piccole imbarcazioni, fino ad ora
sprovviste. Può essere realizzata in tutte le dimensioni e
facilmente installabile nei refitting.
Mechanical seal with a hydraulic barrier system integrated into the
stationary case directly before the stern tube. ADVANTAGES:
Economical, easy to assemble, it allows you to increase the onboard
safety even on small boats,
which was missing until now. It can be manufactured in all sizes
and it can be easily installed in refitting.
Tenuta meccanica con sistema idraulico di sbarramento integrato
nella cassa stazionaria e anelli di contatto in versione “full
split”. VANTAGGI: economica, facile da montare.
La versione “full split” permette di disaccoppiare completamente la
tenuta meccanica direttamente in acqua e senza muovere nessun
componente della linea di propulsione.
Oltre alla manutenzione sul posto è possibile sostituire ogni suo
componente o avvalersi del service Microtem. Nessuna esigenza di
cantiere, nessun fermo temporale.
Mechanical seal with a hydraulic barrier system integrated in the
stationary case and with sliding rings in “full split” version.
ADVANTAGES: economical, easy to assemble.
The “full split” version enables to fully decouple the mechanical
seal directly into the water and without moving any component of
the propulsion line. In addition to the on-site maintenance, you
can replace any component or use the Microtem service. No need for
a yard, no waste of time.
Lista parti / Part List
Viste in dettaglio / Detail views
ENGINE SIDE
905
Tenuta meccanica con anelli di contatto in versione “semi split”.
VANTAGGI: economica, facile da montare, grazie al kit di
manutenzione in due metà, permette di poter compiere la revisione
della tenuta meccanica senza muovere nessun componente della linea
di propulsione.
Mechanical seal with sliding rings in “semi split” version.
ADVANTAGES: Economical, easy to assemble, thanks to the maintenance
kit in two halves you can perform the mechanical seal recondition
without moving any component of the propulsion line.
904
908
909
Materiali: ogni tipo di materiale è disponibile su richiesta
Materials: any kind of material is available on request
Operating limits
Shaft diameter: 35 up to 200 mm Speed: 20 m/s
Temp.:-30 +90 °C (-22 ° + 194 °F) Pressure: max 2.5 barg
Limiti operativi
Diametro: da 35 a 200 mm Velocità: 20 m/s
Temp.: -30 +90 °C (-22 ° + 194 °F) Pressione: max 2.5 barg
Optionals monitoring Instruments
Axial and radial vibration sensor
Strumenti di monitoraggio opzionali
Indicatore di controllo flusso Sensore di vibrazioni assiali e
radiali
Bureau Veritas Rules for the Classification of Steel Ships (NR467)
· Bureau Veritas Rules for the Classification of Naval Ships
(NR483) · Bureau Veritas Rules for the Classification of Yachts
(NR500)
ENGINE SIDE
ENGINE SIDE
ENGINE SIDE
INNOVAZIONE TECNOLOGICA
La Serie MTM900 prevede l’introduzione del primo sistema pneumatico
di sbarramento integrato
in una tenuta meccanica predisposta per l’attacco su
tubo.
barrier system, which is integrated in a mechanical
seal suitable for the installation on the stern tube.
ITEM COMPONENT MATERIAL OPTIONAL MATERIALS QT.Y
1 STERN TUBE CASE COMPOSITE SS 316 - ALLUMINIUM - DUPLEX 1
2 GRUB SCREW CONTAINER SS 316 3
3 GRUB SCREW SS 316 3
4 O-RING NBR EPDM 1
5 FLEXIBLE PIPE SUPPORT SS 316 1
6 O-RING NBR EPDM 1
7 STATIONARY RING CARBON 1
8 ROTARY RING SS 316 1
9 O-RING NBR 2
11 CAP SS 316 1
12 PRELOAD SCREW SS 316 4
13 ANTIROTATION SCREW SS 316 4
14 SPRING SS 316 16
15 CAP SS 316 -
17 STATIONARY HOLDER SS 316 DUPLEX - ALLUMINIUM 1
18 LOCKING SCREW SS 316 4
19 GASKET NBR EPDM 1
20 PRELOAD RING SS 316 1
21 STATIONARY INSERT SILICON CARBIDE TUNGSTEN CARBIDE 1
22 ROTARY INSERT SILICON CARBIDE TUNGSTEN CARBIDE 1
23 O-RING NBR EPDM 1
24 ROTARY HOLDER SS 316 DUPLEX - ALLUMINIUM 1
25 INTEGRATED INFLATABLE ELASTOMER RING CHLOROPRENE 1
26 VALVE SS 316 1
27 NUT SS 316 1
28 SPLIT STERN TUBE CASE COMPOSITE SS 316 1
29 SPLIT INSERT STATIONARY CASE SS 316 SS 316 - ALLUMINIUM - DUPLEX
1
30 SPLIT INSERT ROTARY CASE SS 316 1
Sistema elastico multimolla / Multispring elastic system Foro di
spurgo per l’aria / Air vent hole Vite di precarico / Preload
screwForo per connessione opzionale / Hole for the optional
connection Vite di antirotazione / Anti-rotation screw
ENGINE SIDE
35 100 50 1/8” 120 50
40 100 55 1/8” 120 50
45 120 60 1/8” 120 50
50 120 65 3/8” 140 50
55 125 70 3/8” 140 50
60 125 75 3/8” 140 50
65 125 80 3/8” 140 50
70 155 85 3/8” 140 50
75 155 90 3/8” 140 50
80 160 95 3/8” 140 50
85 160 100 3/8” 140 50
90 180 105 3/8” 155 50
95 180 110 3/8” 155 50
100 180 115 1/2” 155 50
105 190 120 1/2” 155 50
110 190 125 1/2” 155 50
115 190 130 1/2” 155 50
120 200 135 1/2” 165 50
125 200 140 1/2” 165 50
130 200 145 1/2” 180 50
135 200 150 1/2” 180 50
140 200 155 1/2” 180 50
145 200 160 1/2” 180 50
150 210 165 1/2” 180 50
155 210 170 1/2” 180 50
160 210 175 1/2” 200 50
165 210 180 1/2” 200 50
170 210 185 1/2” 200 50
175 210 190 1/2” 200 50
180 220 195 1/2” 200 50
185 220 200 1/2” 200 50
190 220 205 1/2” 200 50
195 220 210 1/2” 200 50
200 240 215 1/2” 250 50
d1 D2 J min K L1 L2 d1 D2 J min K L1 L2 d1 D2 J min K L1 L2 d1 D2 J
min K L1 L2
1 3/8’’ 4’’ 2’’ 1/8” 4 3/4’’ 2’’
1 1/2’’ 4’’ 2 1/4’’ 1/8” 4 3/4’’ 2’’
1 3/4’’ 4 3/4’’ 2 3/8’’ 1/8” 4 3/4’’ 2’’
2’’ 4 3/4’’ 2 1/2’’ 3/8” 5 1/2’’ 2’’
2 1/4’’ 5’’ 2 3/4’’ 3/8” 5 1/2’’ 2’’
2 3/8’’ 5’’ 3’’ 3/8” 5 1/2’’ 2’’
2 1/2’’ 5’’ 3 1/4’’ 3/8” 5 1/2’’ 2’’
2 3/4’’ 6 1/4’’ 3 3/8’’ 3/8” 5 1/2’’ 2’’
3’’ 6 1/4’’ 3 1/2’’ 3/8” 5 1/2’’ 2’’
3 1/4’’ 6 3/8’’ 3 3/4’’ 3/8” 5 1/2’’ 2’’
3 3/8’’ 6 3/8’’ 4’’ 3/8” 5 1/2’’ 2’’
3 1/2’’ 7’’ 4 1/4’’ 3/8” 6 1/4’’ 2’’
3 3/4’’ 7’’ 4 3/8’’ 3/8” 6 1/4’’ 2’’
4’’ 7’’ 4 1/2’’ 1/2” 6 1/4’’ 2’’
4 1/4’’ 7 1/2’’ 4 3/4’’ 1/2” 6 1/4’’ 2’’
4 3/8’’ 7 1/2’’ 5’’ 1/2” 6 1/4’’ 2’’
4 1/2’’ 7 1/2’’ 5 1/4’’ 1/2” 6 1/4’’ 2’’
4 3/4’’ 8’’ 5 3/8’’ 1/2” 165 2’’
5’’ 8’’ 5 1/2’’ 1/2” 165 2’’
5 1/4’’ 8’’ 5 3/4’’ 1/2” 7’’ 2’’
5 3/8’’ 8’’ 6’’ 1/2” 7’’ 2’’
5 1/2’’ 8’’ 6 1/4’’ 1/2” 7’’ 2’’
5 3/4’’ 8’’ 6 3/8’’ 1/2” 7’’ 2’’
6’’ 8 1/4’’ 6 1/2’’ 1/2” 7’’ 2’’
6 1/4’’ 8 1/4’’ 6 3/4’’ 1/2” 7’’ 2’’
6 3/8’’ 8 1/4’’ 7’’ 1/2” 8’’ 2’’
6 1/2’’ 8 1/4’’ 7 1/4’’ 1/2” 8’’ 2’’
6 3/4’’ 8 1/4’’ 7 3/8’’ 1/2” 8’’ 2’’
7’’ 8 1/4’’ 7 1/2’’ 1/2” 8’’ 2’’
7 1/4’’ 8 3/4’’ 7 3/4’’ 1/2” 8’’ 2’’
7 3/8’’ 8 3/4’’ 8 1/2” 8’’ 2’’
7 1/2’’ 8 3/4’’ 8 1/4’’ 1/2” 8’’ 2’’
7 3/4’’ 8 3/4’’ 8 3/8’’ 1/2” 8’’ 2’’
8’’ 9 1/2” 8 1/2’’ 1/2” 9 3/4’’ 2’’
d1 D2 J min K L1 L2 d1 D2 J min K L1 L2 d1 D2 J min K L1 L2 d1 D2 J
min K L1 L2
17 18 19 20 21 22 23 24
27
25