Thank you for purchasing the Media-Jukebox-X. The following out-of-the-box Quickstart provides all of the basic instructions you will need to get files on to your MJX and ready for playback.

I. Connecting the MJX to a computer

What you will need:

• A computer with a USB 2.0 port and Windows XP

1. Connect the small end of the USB cable to the USB 2.0 output on the MJX2. Connect the other end(s) to a USB 2.0 port on your computer

The included USB 2.0 cable is double-ended. If you have two USB 2.0 ports available on your computer, plug in both ends. If there is only one USB 2.0 port available, you can connect one end only but make sure it is the correct end. See diagram below for only connecting one end of the USB 2.0 cable to a computer.

3. Open up My Computer to find the Media-Jukebox-X. It will be called ‘Local Disc (F:)’.

NOTE: If the MJX does not appear in your My Computer folder, this could be because there is already an (F:) drive on your computer. If this is the case, you will need to change the MJX’s drive letter (section II). If not, go directly to the Loading Files on to the MJX section (Section III).

II. Changing the Drive Letter

1. Open MY COMPUTER2. Click on CONTROL PANEL on the left side of the window3. Double-click on the “Administrative Tools” icon4. Double-click on the “Computer Management” icon5. Click on “Disk Management” on the left hand menu of the “Computer Management” window6. In the lower right hand window, scroll down until you find the drive that is labeled:

Local Disc (F:)232 GB FAT 32

7. Right-click on this drive and click on “Change Drive Letter and Paths...”8. Click on the “Change...” button.9. Make sure “Assign the following drive letter:” is selected. Click on the arrow box on the right.hand side and change the letter to “M” or any other letter that is not being used.10. If a confirmation window pops up, press “Yes”.11. Open MY COMPUTER again and look for Drive (M:)

Media-Jukebox-X Out-of-the-Box Quikstart

1

III. Loading files on to the Media-Jukebox-X

There are two ways to load the MJX:

1. Load CD+G files directly from a CD+G disc using the included CD+G to AVI Ripper program2. Rename and load Mp4 files that are already on your computer

The following instructions explain, step by step, both of the above situations.

• Load CD+G files directly from a CD+G disc using the included CD+G to AVI Ripper program

A. Installing the CD+G to AVI Ripper Program

1. Insert the CD+G to AVI Ripper disc into your computer’s disc drive. A “CD+G to AVI Ripper” window will appear.2. Click on “Install CD+G to AVI Ripper” to begin installation. The Welcome window will appear3. Click Next in the Welcome window. The License Agreement window will appear.4. Click the button next to “I Accept the Agreement” then click NEXT. The Select Destination Location will appear.5. Click NEXT. The Select Start Menu window will appear.6. Click NEXT. The Select Additional Tasks window will appear.7. Click the “Create a Desktop Icon” and the “Download LAME Mp3 Encoder” box so that they both have in them. Click NEXT. The Ready to Install window will appear.8. Click INSTALL. The Completing the Setup Wizard window will appear.9. If you want to run the program immediately, click the “Launch CD+G to AVI Ripper” box so that it has an in it and then click FINISH.

Media-Jukebox-X Out-of-the-Box Quikstart

2

B. Converting CD+G files directly from a CD+G Disc using the Power CD+G to AVI Ripper Program

Setup

1. Create a new folder on the desktop and title it MJ Karaoke 2. Insert a CD+G disc into a disc drive on your computer3. If the program is already open, click on the REFRESH button in the program window. Otherwise open the program.

Beginning from the top of the program window down:

1. Make sure there is an X next to “CD+G INPUT”2. Make sure the window next to DEVICE displays the name of the disc drive that contains the CD+G disc that you have loaded.3. In the Track window, click the boxes next to the tracks that you want to convert and load. There will be an X next to each track.4. In the Output section, click the button next to Output Directory. Now click on the button with three periods on it, to the right of the Output Section. Choose the MJ Karaoke folder and click OK.5. Click the box next to the “Add File Number Starting with” so that there is an X in it. If this is the first time, make sure the number in the box is at “00001”. If have already done this before, there is no need to do it again. 6. Make sure the Video and Audio options are the same as the diagram below.7. Click CONVERT.

Loading the Files on to the MJX

1. Make sure the MJX is connected to the computer2. Open MY COMPUTER3. Open the MJX4. Drag the MJ Karaoke folder from the desktop in to MJX window5. Once the files have been loaded they can now be viewed on a TV screen for playback

• Renaming and Loading Mp4 Files That are Already on your Computer

If there are already files on your computer that you want to play on the Media-Jukebox, you can use the included File Renamer program to insert a five-digit number to the beginning of each file.

Installing the File Renamer Basic program

1. Go to MY COMPUTER and open up the Media-Jukebox-X2. Find the “downloads-FileRenamerBasic.EXE” file and drag it to the desktop3. Double-click on the “downloads-FileRenamerBasic.EXE” icon to begin installation. The Welcome window will appear.4. Click Next in the Welcome window. The License Agreement window will appear.5. Click Yes in the License Agreement window. The Select Destination Directory window will appear.6. Click Next in the Select Destination Directory window. The Select Program Folder window will appear.7. Click Next in the Select Program Folder window. The Summary window will appear.8. Click Install in the Summary window.9. To start the program immediately make sure there is an X in the Launch Program File box before clicking Finish. Otherwise just click Finish.

Media-Jukebox-X Out-of-the-Box Quikstart

3

Renaming the files using the File Renamer Basic program

1. Make sure all of the files to be renamed are grouped in a single folder2. Select the folder in the left explorer window 3. In the Filename section at the bottom of the window, click the Place Unique Filename Before Paramater box so that there is an in it4. In the Unique Parameter section at the bottom of the window, make sure there are five 0s (00000). By default there will only be four and you must add one more. 5. Click PREVIEW to see what the new file names will look like6. Click APPLY to make the changes 7. The files are now ready to be stored inside the Media-Jukebox-X

Media-Jukebox-X Out-of-the-Box Quikstart

4www.vocopro.com