Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
The Fourth Chinese International Turbomachinery Conference & Exhibition
Time
9:00-9:40
9:40-10:20
10:20-10:50
No./Title
☆202009958 ((Invited Talk))
Turbomachinery instability traceability diagnosis
and self-recovery regulation
☆202010986 ((Invited Talk))
Investigation of flow mechanism on the develop-
ing characteristics and the interaction of rotating
stall and surge in centrifugal compressors
Coffee Break
Author/Affiliation
Jin-ji GaoBeijing University of Chemical Technology
Guang XiXi’an Jiaotong University
8:30-9:00
Chairman: Chu-hua Zhang
Opening CeremonySpeech delivered by:Yong Zhang,Chief engineer,Shenyang Blower Works Group Corporation
Guang Xi,Vice Principal ,Xi’an Jiaotong University
Gang Wang, Party Secretary, Hangzhou Steam Turbine Co.,Ltd.
31th Oct,2020 KEYNOTE LECTURES English Session
Meeting Room:Wen Hua Ballroom
Chairperson:Hong Wang Gang Wang
10:50-11:30
11:30-12:10
☆2020101016 ((Invited Talk))
Investigation of the flow in the tip region of a
compressor cascade and its coupling with blade
vibration
☆202010969 ((Invited Talk))
Optimization of compressor rotor integrated with
casing treatment
Hong-wei Ma
Beihang University
Hai-xin Chen
Tsinghua University
·· 1
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct KEYNOTE LECTURES English Session
Meeting Room:Wen Hua ballroom Chairman:Cun-liang Liu
Time
13:40-14:20
14:20-15:00
15:00-15:40
15:40-16:00
16:00-16:40
16:40-17:20
No./ Title
☆2020101035 (Invited Talk)
Studyonvibrationlocalizationinducedby typical mis-
tuning in impellers with cyclic symmetry and its con-
trolling
☆2020101034 (Invited Talk)
Multi- objective, multi- disciplinary inverse design
based automatic optimization of turbomachinery
☆202010967 (Invited Talk)
Stability issues for new generation of engines appli-
cation of ML in turbomachinery
Coffee Break
☆202009939 (Invited Talk)
Multi- component multi- discipline multi- scale inter-
actions-challenges and opportunities for turboma-
chinery CFD
☆202010961 (Invited Talk)
Surface vortex flow control and heat transfer en-
hancement-from gas turbine blade cooling to heat ex-
changer performance improvement
Author/Affiliation
Jia-zhong Zhang
Xi'an Jiaotong University
Mehrdad Zangeneh
Department of Mechanical Engineering, University college
London,UK
Mehdi Vahdati
Imperial College London,UK
Li He
University of Oxford,UK
Yu Rao
Shanghai Jiao Tong University
·· 2
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct KEYNOTE LECTURES:PUMPS AND HYDROTURBINES English Session
Meeting Room:Jia Hua Ballroom Chairman: Hong-xun Chen
Time
13:40-14:20
14:20-15:00
15:00-15:40
15:40-16:00
Chairman: Wei Han
16:00-16:40
16:40-17:20
17:20-18:00
No./ Title
☆202001784 (Invited Talk)
Thermodynamic effects on Venturi cavitation
characteristics
☆2020101036 (Invited Talk)
On the physical mechanisms and mitigation of tip
vortex cavitation
☆2020101039 (Invited Talk)
Influences of the heavy medium on characteristics
of an axial flow pump
Coffee Break
☆202006880 (Invited Talk)
Pressure pulsation mechanism of centrifugal pump
and its relationship with vibration
☆2020101019 (Invited Talk)
Centrifugal pump flow analysis: state of the art and
perspectives
☆2020101017 (Invited Talk)
Maximum Likelihood Identification of Flow Instabil-
ities in Cavitating Inducers
Author/Affiliation
Shu-hong Liu
Tsinghua University
Farhat Mohamed
Eole Polytechnique Federale De Lausanne,Switzerland
Cong-xin Yang
Lanzhou University of Technology
Hong-xun Chen
Shanghai University
Gerard Bois
Arts et Metiers ParisTech,France
Luca d' Agostino
University of Pisa,Italy
·· 3
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct KEYNOTE LECTURES:NEW TECHNOLOGY English Session
Meeting Room:Yao Hu hall Chairman: Hai-xin Chen
Time
13:40-14:20
14:20-15:00
15:00-15:40
15:40-16:00
No./ Title
☆2020101032 (Invited Talk)
Advanced simulation and analysis techniques for axi-
al fan noise and the hot gas ingress into the rim seal
of an axial turbine
☆201912659 (Invited Talk)
Foil bearing technology for high speed single stage
air compressors for fuel cell applications
☆202010966 (Invited Talk)
De-centralized gas turbine solutions for the challeng-
es of tomorrow
Coffee Break
Author/Affiliation
Matthias Meinke
Institute of Aerodynamics,RWTH Aachen University,Germany
Kim Daejong
University of Texas at Arlington,USA
Robert Krewinkel
MAN Engergy Solutions SE,Germany
·· 4
The Fourth Chinese International Turbomachinery Conference & Exhibition
13:40-14:20
14:20-15:00
15:00-15:40
15:40-16:00
☆202009951 (Invited Talk)
A key for turbomachinery digital twin solution:
generalized deep learning analytics for cross- fleet
fault diagnostics
☆2020101022 (Invited Talk)
The development and applications of an in- house
CFD code for turbomachinery
☆202010976 (Invited Talk)
Research on external infrared radiation loading tech-
nology for hot components in aero-engine
Coffee Break
Xiao-mo Jiang
Dalian University of Technolagy
Fang-fei Ning
Beihang University
Xian-long Meng
Northwestern Polytechnical University
31th Oct KEYNOTE LECTURES:NEW TECHNOLOGY Chinese Session
Meeting Room:Hui Jian Hall Chairman: Xiao-fang Wang
Time No./ Title Author/Affiliation
·· 5
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS English Session
Meeting Room:Shang Qing hall Chairman: Rong Xie
Time
13:20-13:40
13:40-14:00
14:00-14:20
14:20-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
No./ Title
202009924
Effect of working fluid physical properties on aero-
dynamic performance of subsonic axial compressor
rotor
202010960
Effect of dimple's depth- diameter ratio on highly-
loaded compressor cascade
202009913
Numerical investigation of the flow field and aerody-
namic load on impellers under radial inlet guide
vanes with trailing edge blowing in centrifugal com-
pressor
202005851
Study on the method of expanding stability of cen-
trifugal compressor
201910622
Research on the unsteadiness in the tip flowfield for
axial compressor
202004838
Analysis of jet suppressing root leakage in plane cas-
cade
201909590
Aerodynamic optimal design of multi- stage axial-
flow industry compressor configurations using air-
craft engine technology
Coffee Break
Author/Affiliation
Zhi-tao Tian1;Adil Malik2;Long Wang1; Hua-wei Lu1
1.Dalian Maritime University;
2.Harbin Engineering University
Long Wang1;Hua-wei Lu1;Zi-xin Ping1;Shuang Guo2;
Zhi-tao Tian1;Xiao-zhi Kong 1
1.Marine Engineering College,Dalian Maritime University;
2.School of Energy and Power Engineering, Dalian University
of Technology
Jian- chi Xin1;Hai- tao Liu2;Zhi- tao Tian1;Xiang- yang
Liu1;Xiao-zhi Kong1;Xiao-fang Wang2
1.Dalian Maritime University;
2.Dalian University of Technology
Chun-yang Li;Chun-jun Ji
Dalian University of Technology, School of Energy and Power
Engineering
Mo-ru Song;Bo Yang
Shanghai Jiao Tong University
Meng Tang;Xin Fu;Ying-ying Xu
Nanjing University of Aeronautics and Astronautics
Fan Lei; Ya-ping Ju; Chu-hua Zhang
School of Energy and Power Engineering, Xi’an Jiaotong Uni-
versity
·· 6
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS English Session
Meeting Room:Shang Qing Hall Chairman: Jin-guang Yang
Time
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
No./ Title
201909589
Optimzation of a 40MW SCO2 cycle and aerodynam-
ic design of compressor
202002814
Research on the effect of partial pressure side wing-
let on the performance of high-loaded compressor ro-
tor
202010989
Modeling and analysis of the compressor for the
large continuous wind tunnel on anti-surge process
202002812
Effect of elliptical leading edge on the aerodynamic
perfomance of a compressor static blade
2020101020
An investigation of the shell-side flow of a shell-and-
tube exchanger with impingment plate
202009903
Numerical investigation of leaned strake in the ram-
rotor
Author/Affiliation
Hao Li1; Ya-ping Ju1;Yong Zhang2;Chu-hua Zhang1
1.School of Energy and Power Engineering, Xi’an Jiaotong
University;
2.Shenyang Blower Works Group Corporation
Han Teng1;Jing-jun Zhong2
1.Dalian Maritime University;
2.Shanghai Maritime University
Yong-rui Sun;Li-xin Yao;Xin Jin;Yu-ying Sun;
Chen Tao
Shenyang Blower Works Group Corporation
Ling Yang1;Jing-jun Zhong1;Xiao-xu Kan1;Lei Duan2
1.Shanghai Maritime University;
2.Dalian Maritime University
Yi Wang1,2;Guo-liang Qin1;Shu-hua Yang2;Yong Zhang2;
Qin Cui1;Cheng Jia1
1.School of Energy and Power Engineering, Xi'an Jiaotong
University;
2.Shenyang Blower Works Group Corporation
Jian Guan1;Ji-ang Han1;Ke-xin Yu1;Jing-jun Zhong2
1.Naval Architecture and Ocean Engineering College, Dalian
Maritime University;
2.Merchant Marine College, Shanghai Maritime University
·· 7
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct EXPERIMENTS AND MEASUREMENT TECHNIQUES English Session
Meeting Room:Lu Shan Hall Chairman:Hua-wei Lu
Time
14:00-14:40
14:40-15:20
15:20-15:40
15:40-16:00
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
No./ Title
☆2020101011 (Invited Talk)
Pressure sensitive paint systems and industrial appli-
cations
☆2020101008 (Invited Talk)
Research of five- hole probe testing system used in
turbomachinery cascade experiment
202005859
Research on the adjustable guide vane in a compres-
sor sector cascade
Coffee Break
202009950
An experimental platform with rotating airflow exci-
tation and stationary blisk vibration measurement
201910617
Design of basic stage performance test rig for axial
compressor
202002804
Effect of solid heat conduction on accuracy and effi-
ciency in steady-state liquid-crystal measurement of
flat gas film heat transfer coefficient
202001767
Characteristics of the supersonic flow dominated by
large-scale streamwise vortices
201910620
Experimental investigation and optimal design of
power turbine generator set
202002813
Experimental Investigation of the Influence on com-
pressor cascade characteristics at high subsonic
speed with pressure surface tip winglets
Author/Affiliation
Hong-jie Zhong
AVIC Aerodynamics Research Institute
Hua-wei Lu
Dalian Maritime University
Wen-feng Xu1;Peng Sun2;Guo-gang Yang1
1.Dalian Maritime University, Dalian, China;
2.Civil Aviation University of China
Luo-hui Ouyang1;Qing-zhen Bi1;Hai Shang1;
Li-min Zhu1;Jian-hua Yu2
1.Shanghai Jiao Tong University;
2.AECC Commercial Aircraft Engine Co., Ltd.
Yi-tian Wang;Ji-cheng Duan;Hong-min Zhao;
Mei-ying Wang;Dong Ren;Xue Yang;Wei-bo Yan
Xi’an ShaanGu Power Co.,Ltd.
Qi-chao Xue;Hong-yu Gao;Xue-ying Li;,Jing Ren
Department of Energy and Power Engineering, Tsinghua Uni-
versity
Qian-cheng Wang;Yu-xin zhao;Cheng-long Wang
Science &Technology on Scramjet Laboratory, National Uni-
versity of Defense Technology
Pei-jun Qin;Zi-jian Zhang;Jie-wei Peng;Jing-fen Li
Shanghai Marine Diesel Engine Research Institute
Wan-yang Wu;Jing-jun Zhong
Merchant Marine College, Shanghai Maritime University
·· 8
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct HEAT TRANSFER English Session
Meeting Room:Mei Ling Hall Chairman:Hai-wang Li,Guang-chao Li
Time
14:00-14:40
14:40-15:20
15:20-15:40
15:40-16:00
16:00-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
No./ Title
☆202009952 (Invited Talk)
Advancement in turbine endwall film cooling
☆2020101023 (Invited Talk)
Temperature Effect on the Lifetime of Turbine Blade
202003828
Numerical study on particle deposition characteris-
tics of impingement effusion cooling structure
Coffee Break
☆202009919 (Invited Talk)
Degradation of the cooling performance of the dou-
ble wall nozzle guide vane in an engine
201909570
Numerical research on film cooling characteristics
of BESA hole with mist-air two-phase flow
201909583
Exit- shape effect of film holes at pressure side on
trailing edge cutback film cooling characteristics
202009917
Impact of blade leading edge film coolant on the
blade tip phantom cooling
202004850
Effects of equivalent porosity of impingement plate
on the flow and cooling characteristic of afterburner
heat shield
Author/Affiliation
Kun Du1;Cun-liang Liu1;Jun Li2;Bengt Sunden3
1.Northwestern Polytechnical University;
2.Xi’an Jiaotong University;
3.Lund University
Hai-wang Li; Ru-quan You
Beihang University
Bing- ran Li;Cun- liang Liu;Lin Li;Wen- bin Chen;Yi-
hong He
Northwestern Polytechnical University
Guang-chao Li
Shenyang Aerospace University
Kang Huang;Hu-sheng Ma ;Pei-jie Shi;Dong-jian Liu
China Aerodynamics Research and Development Center
Jian Pu1;Jian-hua Wang1;Wei Song2;Wei-long Wu1
1.CAS Key Laboratory of Mechanical Behavior and Design
of Materials, Department of Thermal Science and Energy En-
gineering, University of Science and Technology of China;
2.Aero- engine Institute of Aviation Industry Corporation of
China
Feng Li;Zhao Liu;Zhen-ping Feng
Xi’an Jiaotong University
Rui Wang;Cun-liang Liu;Hai-yong Liu;Jia-jia Niu;
Hong-ren Sui
School of Power and Energy, Northwestern Polytechnical Uni-
versity
·· 9
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct MATERIALS AND MANUFACTURING PROCESS Chinese Session
Meeting Room:Dong Shan Hall Chairman:Ming-yue Sun
Time
14:00-14:40
14:40-15:20
15:20-15:40
15:40-16:00
No./ Title
☆202007894 (Invited Talk)
Application of the friction technology to the new
materials and structures of aeroengine
☆2020101007 (Invited Talk)
Research progress on inclusion clusters of ni- based
superalloy(s)
201912725
Cryogenic properties of abradable seal coating
Coffee Break
Author/Affiliation
Wen-hui Zhu
AVIC shenyang Liming Aero-Engine Group Corporation
Zhi-gang Wang
Fushun Special Steel Co.,Ltd.
Ke-ping Chen
Hangzhou Hang yang expander Co.,Ltd .
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
201912652
Study on acid corrosion characteristics in low-pres-
sure stage initial condensation zone of supercritical
H2O/CO2 turbine
2020101009
Investigation on high- temperature creep properties
of the materials for turbine compressors rotor
2020101010
Effect of gradient layer number on microstructure
and property of laser deposition TA15/TI2ALNB
transition zone
202008896
Analysis of influence of retrogression and reaging
treatment on mechanical properties of 7075 alumini-
um alloy
Zi-yue Ma;Xiao-fang Wang;Tao Jiang;Wei Wang;
Yang Xu
Dalian University of Technology
Cui-min Bao;Rui Chen;Zhi-peng Yang;Wei Chen;
Sheng-chi Wang
Shenyang Blower Works Group Corporation
Bo He1;Ying-tong Lin1;Guang Yang1;Qing-jun Zhou2;
Xiang-ming Wang3
1.School of mechanical and electrical engineering, Shenyang
University of Aeronautics and Astronautics;
2.Capital Aerospace Machinery Co., Ltd;
3.Shenyang Aircraft Design and Research Institute,Aviation
Industry Corporation of China
Cai-yu Tang1;Rui-ming Su2
1.Shenyang Blower Works Group Corporation;
2.Shenyang University of Technology
·· 10
The Fourth Chinese International Turbomachinery Conference & Exhibition
31th Oct STRUCTURAL DESIGN:STRENGTH & VIBRATION English Session
Meeting Room:Boardroom Chairman: Yue-fang Wang
Time
14:00-14:40
14:40-15:20
15:20-15:40
15:40-16:00
No./ Title
☆202001783 (Invited Talk)
Harmonic balance method applied to vibration of air-
craft engine in the presence of contact nonlinearities
☆202009925 (Invited Talk)
Influence of tip clearance distribution on blade vibra-
tion in a radial turbine
202002794
The study of the contact interface for compressor blisk
with ring damper using noninear modal analysis
Coffee Break
Author/Affiliation
Loic Salles
Imperial College London
Lei Pan;Ming-yang Yang;Shou-ta Murae;Wataru Sa-
to;Naoto Shimohara;Akihiro Yamagata
Shanghai Jiao Tong University;
IHI Corporation, Yokohama, Japan
Ye-kai Sun;Jie Yuan;Enora Denimal; Loic Salles
Department of Mechanical Engineering, Imperial College Lon-
don
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
202001789
Research on structural parameters of array impinge-
ment jet cooling in gas turbine combustor liner
202007892
Low- speed straight flow wind tunnel design for
wind turbine test
201912731
Multiple critical areas life verification under single
low pressure turbine spin rig test based on safe life
approach
202009937
Research on intelligent diagnosis method for typical
vibration faults of rotating equipment
202010973
Investigation of time-series prediction for turbine
machinery condition monitoring
2021909573
Fault identification and health monitoring of gas
turbine engines using hybrid machine learning-based
strategies
Rong Xie;Hao Wang;Bao-peng Xu;Wei Wang
1.Key Laboratory of Ocean Energy Utilization and Energy
Conservation of Ministry of Education;
2.School of Energy and Power Engineering ,Dalian University
of Technology
Jin Xiong;Yi Xiang;Peng-hua Guo;Jing-yin Li
School of Energy and Power Engineering, Xi’an Jiaotong Uni-
versity
Da-cheng Liu;Zhong-yan An;Guo-dong Chen
Strength Test Department, Shenyang Engine Research Institute
Xin Pan;Xian-cheng Zhang;Cong-cong Xu;Kun Feng;
Guo-cheng Tian
Beijing Key Laboratory of Health Monitoring and Self-recov-
ery for High-end Mechanical Equipment, Beijing University of
Chemical Technology;
2 Huadian Electric Power Research Institute Corporation
Chang-jun Liu1;Hai-tao Liu1;Chao Bian1;
Xu-dong Chen1;Shu-hua Yang2;Xiao-fang Wang1;
1.School of Energy and Power Engineering, Dalian University
of Technology;
2.Shenyang Blower Works Group Corporation
Yan-yan Shen;Khashayar Khorasani
Department of Electrical and Computer Engineering
Concordia Institute of Aerospace Design and Innovation
Concordia University Montreal, Quebec CANADA
·· 11
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov KEYNOTE LECTURES: INDUSTRY Chinese Session
☆Invited Talk Meeting Room:Wen Hua ballroom Chairman:Guang Xi
Time
8:30-9:00
9:00-9:30
9:30-10:00
10:00-10:30
10:30-11:00
11:00-11:30
11:30-12:00
12:00-13:30
No./ Title
Three kinds of compressors for ethylene plant: devel-
opment and future
HTC industrial steam turbine technology develop-
ment and industrial application
A new generation of high- efficiency energy- saving
equipment based on aero engines
Coffee Break
Application of DongFang turbine technology in in-
dustrial field
Gas turbine technology and products of AECC
Research progress on homogenization manufactur-
ing of heavy components by metal additive forging
Buffet Lunch
Author/Affiliation
Yong Zhang
Shenyang Blower Works Group Corporation
Xiao-fei Ma
Hangzhou Steam Turbine Co.,Ltd.
Guang-ping Lu
Chengdu Chengfa Science & Energy Power Engineering Co.,
Ltd.
He Li
Dongfang Turbine Co., Ltd.
Xin-he Gao
AECC Gas Turbine Co., Ltd.
Ming-yue Sun
Institute of Metal Research,Chinese Academy of Science
Chairman:Guang-ping Lu
13:30-14:00
14:00-14:30
14:30-15:00
15:00-15:30
15:30-16:00
Introduction of advanced technology and products
of Harbin Turbine Co., Ltd
Independent research and development progress of
Advanced Micro gas turbines
The evolution of FS-Elliot integrally gear compres-
sor
Technology import, digestion and absorption of
AP1000 nuclear pump
Coffee Break
Jing-sheng Wang
Harbin Turbine Company Limited
Cheng-qin Li
ENN Group
Ming-zhe Chen
FS-Elliott (Shanghai) Machinery Co.,Ltd.
Hong-chang Yu
Shenyang Blower Works Group Nuclear Pump Co.,Ltd.
16:00-16:30
16:30-17:00
17:00-17:30
17:30-18:00
Briefing on the turbo compressor technology deveo-
pment of MAN ES
Shaangu intelligent exploration and practice
Investigation of design elements of flow passage for
small high speed and high efficiency steam turbine
Energy- saving and efficiency increasing of pump
unit system based on digital method
Wen-ling Xiong
MAN Energy Solutions
Zhong Liu
Xi'an Shaangu Power Co., Ltd.
Hao Xu
Jin Tong Ling Technology Group Co., Ltd.
Bao-gang Wang
KSB Group
·· 12
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov SEAL TECHNOLOGY English Session
Meeting Room:Hui Jian Hall Chairman:Jun Li
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:10
10:10-10:30
Chairman:Dan Sun
10:30-10:50
10:50-11:10
11:10-11:30
11:30-11:50
11:50-12:10
No./ Title
☆202010962 (Invited Talk)
Numerical prediction models for static and rotordy-
namic characteristics of annular seals operating un-
der two phase (liquid/gas) conditions
202009940
Design method and research of high temperature gas
floating ring seal with slightly variable gap
202003829
Structural parameter analysis of self-tightening met-
al U-shaped seal ring
202003826
Research and parameter optimization of magnetic
grease seal structure for fan shaft end
Coffee Break
201912729
Enhancing film stability of dry gas seal via proper
design of surface groove
201912661
Study on the influence of high temperature and high
speed working conditions on the leakage characteris-
tics of flexible bristle brush seal
201909587
Experimental investigation on leakage and wear
characteristics of carbon seal for aero-engine
201909565
Numerical investigations on the leakage and rotordy-
namic characteristics of two novel hole-pattern seals
with axially or circumferentially oblique cavity
201912681
Performance analysis of internal spiral groove dry
gas seal based on fluid-solid-thermal coupling meth-
od
Author/Affiliation
Zhi-gang Li;zhi fang;Jun Li
Xi'an Jiao Tong University
Ren-jie Shi;Shuang-xi Li;Rao Zhen;Li-jun Ma;
Jing-bo Zhang
Mechanical and Electrical Engineering, Beijing University of
Chemical Technology
Tian-fu Cheng;Shuang-xi Li
Beijing University of Chemical Technology
Shu-wen Li;Rao Zheng;Qiu-xiang Zhang;Shuang-xi Li
Beijing University of Chemical Technology
Jin-bo Jiang;Ji-yun Li;Xu-dong Peng
Engineering Research Center of Process Equipment and Its Re-
manufacturing of Ministry of Education, Zhejiang University
of Technology
Yu-huMa1;Shuang-xiLi1;Shan-yuZhang2;Hao-ranLiao1;
Lian-xiang Sha1
1.Mechanical and Electrical Engineering, Beijing University of
Chemical Technology;
2.China Aerospace Standardization Research Institute
Guo-qing Li1,2;Zhang Qian3;Jian-qin Zhu4;Qiang-peng
Yu5;Xin-gen Lu1,2
1. Institute of Engineering Thermophysics, Chinese Academy
of Sciences;2. University of Chinese Academy of Sciences;3.
Research Institute of Petroleum Exploration and Development;
4. Beihang University;5. AECC Commercial Aircraft Engine
Co., Ltd.
Zhi Fang, Zhi-gang Li, Jun Li
Institute of Turbomachinery, Xi’an Jiaotong University
Shuang- xi Li;Hao- ran Liao;Rao Zheng;Shi- cong Li;
Yu-hu Ma; Kun-yi Chen
Beijing University of Chemical Technology
·· 13
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov INDUSTRIAL FANS Chinese Session
Meeting Room:Shang Qing Hall Chairman:Xiao-min Liu
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:10
Chairman:Song Li
10:10-10:30
10:30-10:50
10:50-11:10
11:10-11:30
11:30-11:50
11:50-12:10
No./ Title
☆202009911 (Invited Talk)
A review on optimal design of fluid machinery
based on machine learning method
201910627
Fan optimization of self- ventilated traction motor
based on similar design theory
202001775
Numerical study of a new method of collecting fume
for an exhaust hook
Coffee Break
201911638
Investigation of noise characteristics of periodic jet
impinging on a flat plate
202002791
Numerical study of different blade types on large
double suction and double support centrifugal fan
201909545
Numerical study on the influence of different intake
structure on double-suction centrifugal blower
202002803
Optimization design and verification of centrifugal
fan based on parametric modeling
202001782
Design method applied to magnetic bearing system
in high-speed centrifugal blower
202003824
Rotor Dynamics Test of 75kW Oil- free Turbo
Blower
Author/Affiliation
Yi- ran Wang;Wen- jun Zhao;Lian- guo Liang;Qi Wu;
Han-hui Jin;Can-xing Wang
School of Aeronautics and Aerospace, Zhejiang University;
Hangzhou Dunli Electric Appliance Co., Ltd.;
Zhejiang Zhefeng Science and Technology Co., Ltd.
Zheng Shen;Wei-Lin He;Li-Ming Tang;Yi-Hui Wang
CRRC Zhuzhou Electric Co.,Ltd.
Xue-jiang Chen;Qi-shao Zhao
Xi’an Jiaotong University
Xin Liu;He-yuan Huang;Xiao-liang Guo;Jun-long Xie
School of Energy and Power Engineering, Huazhong Universi-
ty of Science & Technology
Du-Ping Fan;Xiao-ping Cao
Changsha blower Co.,Ltd.;
Changsha Radio & TV University
Xiao-ping Cao;Du-ping Fan
Hunan Radio and Television University;
Changsha Blower Co.,Ltd.
Min-biao Lu;Yong-chao Pan;Xiao-bing Yang;
Zhe Zhang;Ming Zhang
Nanjing Tianfu Software Co.,Ltd.
Ying-zhe Zhang;Jun-pu Niu
Shandong Tomorrow Machinery Group Co.,Ltd.
Wen-lin Luan1;Fang-cheng Xu2;Liu-kai Hou3;Bo He4;
Bin Wu5;Guang Zhao1
1.Dalian University of Technology, School of Energy and
Power Engineering;
2.Dalian University of Technology, School of Control Science
and Engineering;
3.Beijing Aerospace Propulsion Institute;
4.Shijiazhuang Kingston Bearing Technology Co., Ltd.;
5.Suzhou Dongling Vibration Test Instrument Co., Ltd.
·· 14
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov PUMPS AND HYDROTURBINES English Session
Meeting Room:Mei Ling Hall Chairman:Xiao-rui Cheng
Time
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:30
No./ Title
202009955
Effect of tip clearance change on the flow structure
of tip leakage flow in centrifugal pump
2020101029
Influence of inlet flow field uniformity on the perfor-
mance of the nuclear main pump
201912674
Optimization design of centrifugal pump impeller
based on intelligent optimization algorithm
201911640
Tesla bladed pump (disc bladed pump) preliminary
experimental performance analysis
202007893
The influence of wall roughness on centrifugal
pump performance
Coffee Break
Author/Affiliation
Yi-meng Jiang;Xiao-rui Cheng
Lanzhou University of Technology
Long Sha;Shu-hua Yang;Xiang-dong Kong;Hui Su;
Lin Pei
Shenyang Blower Works Group Corporation;
Wei-wei Wang;Lei Guo
Beijing Hi-Key Tech Co.,Ltd.
Qi- feng Jiang1;Yu- ming Han1;Hui- yu Zhang1;Wei- bin
Zhang1;Ya-guang Heng1;Gérard Bois1,2;Xiao-bing Liu1
1.Key Laboratory of Fluid and Power Machinery, Xihua Uni-
versity;
2.LMFL, FRE CNRS 3723, ENSAM59046 Lille CEDEX,
France
Von-Hao Wang;Kun-Hang Li;Jing-Yin Li
School of Energy and Power Engineering, Xi’an Jiaotong Uni-
versity
·· 15
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov KEYNOTE LECTURES English Session
Meeting Room:Jia Hua Ballroom Chairman: Hua Chen
Time
13:40-14:20
14:20-15:00
15:00-15:40
15:40-16:00
16:00-16:40
16:40-17:20
17:20-18:00
No./ Title
☆202009929 ((Invited Talk))
Low speed modelling of axial compressor stages
with large relative tip clearance – a review on 25
years of research at the LSRC Dresden
☆2020101031 ((Invited Talk))
Propulsion system aerodynamics
☆202009938 ((Invited Talk))
Investigation on the coupling effect between nacelle
inlet and compressor
Coffee Break
202009922
Towards enhanced reliability of Turbomachinery
CFD predictions
2020101015
Responsible aviation options
202009921
High speed spindles supported with aerostatic
bearings: design methodology and prototypes
Author/Affiliation
Martin Lange
Technische Universität Dresden,Germany
Pavlos K.Zachos
School of Aerospace, Cranfield University,UK
Li Zhou
Northwestern Polytechnical University
Hirsch Charles
NUMECA
Peter RN Childs
Imperial Couege London
Federico Colombo
Department of Mechanical and Aerospace Engineering,
Politecnico di Torino, Italy
·· 16
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: GAS TURBINES English Session
Meeting Room:Shang Qing Hall Chairman:Qun Zheng
Time
14:00-14:40
14:40-15:20
15:20-15:40
15:40-16:00
16:00-16:20
16:20-16:40
No./ Title
☆2020101040 (Invited Talk)
The design and flow control of highly loaded com-
pressor
☆202010988 (Invited Talk)
The effect of investigation of complex flow pattern
at combustor exit on the aero- thermal performance
of high-pressure turbine
202002815
Investigation on axial turbine similarity criterion and
performance modeling methods
Coffee Break
201912717
Investigation of the effect of geometric scaling on
aerodynamic performance of a compressor rotor
201911641
Investigation on interaction between geometry and
performance and design of S-CO2 radial inflow tur-
bine's vaneless inlet volute
Author/Affiliation
Song-tao Wang
Harbin Institute of Technology
Wei-lin Yi
Beijing Institute of Technology
Peng- hui Wang1;Wei- hao Zhang1; Shou- min Jiang2;
Qiang Chen2; Yun Chen2;Bei Hang2
1.Beihang University;
2.AECC Shenyang Engine Research Institute;
Hang-kong Wu;Ding-xi Wang;Xiu-quan Huang;
Bo-qian Wang
Northwestern Polytechnical University
Chang Zhu1;Wen-yang Shao1;Zi-yue Ma1;
Guo-chuan Lv2; Xiao-fang Wang1
1.Dalian University of Technology;
2.AVIC Nanjing Mechanical and Electrical Technology Co.,
Ltd.
·· 17
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: GAS TURBINES English Session
Meeting Room:Shang Qing Hall Chairman:Xin-rong Su
Time
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
No./ Title
202003822
Laminar separation simulation and passive flow con-
trol within a low speed axial turbine at ultra low
Reynolds number
202001762
A Numerical Investigation on Flow Characteristics
of Transonic Tip Gap Flow
201909560
Analysis of the relationship between turbulence char-
acteristics and loss mechanism in the tip leakage
flow of turbine blade
201912656
The influence mechanism of rim sealing flow to the
performance of the axial turbine
Author/Affiliation
Xiao-dong Wang1; Zhong Kang1; Ming-yang Chen1;
Jun-yu Liang2
1.Key Laboratory of Power Station Energy Transfer Conver-
sion and System, Ministry of Education, North China Electric
Power University;
2.Electric Power Science Research Institute, Yunnan Electric
Power Grid Co., Ltd.
Cheng-long Wang;Wu-heng Feng;Qian-cheng Wang;
Yu-xin Zhao
Science and Technology on Scramjet Laboratory, National Uni-
versity of Defense Technology
Hui Li; Xin-rong Su; Xin Yuan
Tsinghua University
Wei-pengXue;Wei-taoZhang;JunZeng;Guo-qingTang
AECC Sichuan Gas Turbine Establishment
·· 18
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov AIRCRAFT ENGINE English Session
Meeting Room:Jing De Hall Chairman:Hong Yan
Time
14:00-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
16:00-16:20
No./ Title
☆202001745 (Invited Talk)
CFD based through flow method and its application
in turbomachinery and aeroengine simulation
202004836
Rapid prediction method of fan broadband noise
based on three-dimensional sound source model
202005852
Study on the aerodynamic performance and internal/
external flow interaction effects of distributed duct-
ed fan in
202001749
Three- dimensional CFD simulation of micro turbo-
jet engine
202009941
Numerical study on the influence of chord length ra-
tio of axial supersonic through-flow tandem configu-
ration on aerodynamic performance
202005872
Volumetric entropy generation rate associated with
tip clearance flow in linear cascade
Author/Affiliation
Jin-guang Yang
Dalian University of Technology
Ye Yang1,2;Dang-guo Yang1,2;Liang-feng Wang1,2
1.High Speed Institute of China Aerodynamics Research and
Development Center;
2.State Key Lab of Aerodynamics
Tian-yu Gong1;Peng-xiang Liang1;Zhuo-qi Wang2;
Wei Yuan1
1.National Key Laboratory of Science and Technology on
Aero- Engine Aero- thermodynamics, School of Energy and
Power Engineering, Beihang University;
2. Unmanned System Institute, Beihang University
Min Zhang1;Tong-yi Li2;Nan Su2,3;Jin-guang Yang2;Yan
Liu2
1.Key Laboratory of Ocean Energy Utilization and Energy
Conservation of Ministry of Education, School of Energy and
Power, Dalian University of Technology ;
2.National Petroleum and Natural Gas Pipe Network Group
Co., Ltd.;
3.State Key Laboratory of Structural Analysis for Industrial
Equipment, Department of Engineering Mechanics, Dalian
University of Technology
Jia-qi Hao1;Shi- jun Sun1;Ju-tao Yang1;Ling Zhou1;Lu-
cheng Ji2
1.School of Aerospace Engineering, Beijing Institute of Tech-
nology;
2. Institute for Aero Engine, Tsinghua University
Bing-xiang Long;Qin Chen;Ze-bin Ren;Da-xiong Liao
Chinese Aerodynamics Research and Development Center
·· 19
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov SUSPENDING TURBOMACHINERY English Session
Meeting Room:Yao Hu Hall Chairman: Lei Zhao Qing Wei
Time
13:40-14:20
14:20-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:20-16:00
No./ Title
☆202001788 (invited talk)
Design approach of foil bearings for refrigerant tur-
bo compressors and orc generators
202009953
Magnetic bearing based high- speed motor system
and its applications in turbo-machinery
202009959
Development and applications of universal modular
control system of active magnetic bearing
202005854
Research on the relationship between dynamic be-
havior of active magnetic bearing system and the
performance of the auxiliary bearing
202010981
Design of industrial high speed compressor with
magnetic bearings
Coffee Break
Author/Affiliation
Dajong Kim
University of Texas at Arlington
Qing Wei
Esurging(Tianjin)Technology Co.,Ltd.
Cheng-ke Yin
School of mechanical and electrical engineering, Soochow Uni-
versity;
Supermag magnetic bearing motor
Zhe Sun1,2,3;Guo-jun Yang1,2,3;Jing-jing Zhao1,2,3;
Xun-shi Yan1,2,3;Zhen-gang Shi 1,2,3
1. Institute of Nuclear and New Energy Technology, Tsinghua
University;
2.Collaborative Innovation Center of Advanced Nuclear Ener-
gy Technology;
3. The Key Laboratory of Advanced Reactor Engineering and
Safety, Ministry of Education
Hong-yang Liang;Xian-hao Ma;Chun-yan Wang;
Hua-jun Wang
Suzhou Palboom Electric Co.,Ltd.
·· 20
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov SUSPENDING TURBOMACHINERY English Session
Meeting Room:Yao Hu Hall Chairman: Lei Zhao Qing Wei
Time
16:00-16:40
16:40-17:00
No./ Title
202005853
Analysis of dynamic behaviors in an nonlinear
active magnetic bearing-rotor system
202001751
Research on the active vibration isolation method by
magnetic bearing
Author/Affiliation
Xiao- shen Zhang1,2,3;Zhe Sun1,2,3;Lei Zhao1,2,3;Xun- shi
Yan1,2,3;Jing-jing Zhao1,2,3;Zhen-gang Shi 1,2,3
1.Institute of Nuclear and New Energy Technology, Tsinghua
University;
2.Collaborative Innovation Center of Advanced Nuclear
Energy Technology;
3.The Key Laboratory of Advanced Reactor Engineering and
Safety, Ministry of Education
Run-hui Yao;Jin Zhou;Hai-tong Wu
Nanjing University of Aeronautics and Astronautics
·· 21
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov FUNDAMENTAL THEORY AND METHODOLOGY English Session
Meeting Room:Boardroom Chairman: Jia-zhong Zhang
Time
14:20-15:00
15:00-15:40
15:40-16:00
16:00-16:20
No./ Title
☆2020101025 (Invited Talk)
Toward realization of numerical towing- tank tests
by wall- resolved large EDDY simulation based on
32 billion grid finite-element computation
☆201909581 (Invited Talk)
A parallel continous adjoint method for design opti-
mization of a transonic compressor rotor
Coffee Break
201909585
Coherent structures in a turbulent plane jet predicted
by large eddy simulations
Author/Affiliation
Chisachi Kato
University of Tokyo
Yu-jie Zhu1;An Liu1;Ya-ping Ju1;Chu-hua Zhang2
1.School of Energy and Power Engineering, Xi’an Jiaotong
University;
2.State Key Laboratory for Strength and Vibration of Mechani-
cal Structures, Xi’an Jiaotong University
Qi-lin Liu, Huan-xin Lai
East China University of Science and Technology
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
201912723
A high- accuracy and conservative overset grid data
transfer method for numerical simulation of turboma-
chinery
202009915
Study of turbulent flow field and noise in low mach
number chevrons nozzles
202009948
A comparative study on multi-task learning methods
for modeling and analysis of multi- fidelity simula-
tion data
202010968
Impact of exploration-exploitation trade-off on UCB-
based bayesian optimization
Peng-cheng Cui;Jing Tang;Bin Li;Huan Li;Xiao-quan
Gong;Ming-sheng Ma
China Aerodynamics Research and Development Center
Qing-bo Meng;Huan-xin Lai
East China University of Science and Technology
Kai Wu;Xiao-fang Wang;Chao Bian;Hai-tao Liu
School of Energy and Power Engineering, Dalian University
of Technology
Chao Bian; Xiao-fang Wang; Chang-jun Liu; Xin-yu Xie;
Hai-tao Liu
Dalian University of Technology
·· 22
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov ROTORDYNAMIC AND BEARINGS Chinese Session
Meeting Room:Lu Shan Hall Chairman: Wei-min Wang
Time
14:00-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
No./ Title
☆202009910 ((Invited Talk))
Study on dynamic characteristics of seal- rotor-
system with crack damage faults
202004834
Analysis and Experimental Study on Dynamic Char-
acteristics of an Aero-engine Power Turbine Rotor
202009906
Analysis of rotor dynamic characteristics and no-
load test on industrial steam turbine with high speed
202009926
Research on aero-engine rotor dynamics considering
bolt loosening characteristics
Coffee Break
Author/Affiliation
Yue-gangLuo;Hai-fengJia;TaoZhou;Feng-chaoHuang
College of Mechanical and Electronic Engineering, Dalian
Minzu University;
Key Laboratory of Intelligent Perception and Advanced
Control of State Ethnic Affairs Commission, Dalian Minzu
University
Wei-jian Nie1,2;Wang-Qun Deng1,2;Ya-nong Chen1,2
1. AECC Hunan Aviation Powerplant Research Institute;
2. Key Laboratory of Aero engine Vibration Technology, Aero
Engine Corporation of China
Long Wang1;Gao-hui Xiao1;Chuan-yue Zhou2
1.Shanghai Electric Power Generation Equipment Co., Ltd,
Turbine Plant;
2.Beijing EMAX Technology Co.,Ltd.
Qing-shan Zhang;Shi-yuan Pei;Jun Hong
Xi’an Jiaotong University
16:00-16:20
202009918
Rotordynamic stability analysis of centrifugal
compressor with impeller aerodynamic effect
Shu-hua Yang1;Xing-yu Tai1;Ji-gang Meng1;
Zhong-hui Xiao1;Xiao-fang Wang2
1.Shenyang Blower Works Group Corporation;
2.School of Energy and Power Engineering, Dalian University
of Technology
·· 23
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov ROTORDYNAMIC AND BEARINGS Chinese Session
Meeting Room:Lu Shan Hall Chairman: Xin Pan
Time
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
No./ Title
201912679
Effects of scratches on the performance degradation
of a thrust bearing
202004839
Dynamic analysis and experimental research on the
cantilever high speed rotor of turbofan engine
202001774
Study on hybrid dynamic modeling method of high-
speed gearbox multi-parallel shafting-bearing-box
201912703
Research on vibration properties of multi-span pow-
er turbine system
201911643
Rotordynamic analysis of centrifugal compressor in-
cluding support flexibility effects
Author/Affiliation
Wen-bin Zheng;Shi-yuan Pei;Jun Hong
Xi'an Jiaotong University
Wei- jian Nie;Wang- qun Deng;Sheng Yuan;Ya- nong
Chen
AECC Hunan Aviation Powerplant Research Institute;
Key Laboratory of Aero engine Vibration Technology, Aero En-
gine Corporation of China
Fang- hui Zhao1;Wei- min Wang1,2;Deng- peng Zhang1;
Jia-le Wang1
1.Beijing University of Chemical Technology. Beijing key Lab-
oratory of Health Monitoring and self-healing of High-end Ma-
chinery and equipment;2.State Key Laboratory of Compressor
Technology
Zhi-lian Zhang1;Ling-yu Wang1;Qiang Lu2;
Jing-chun Liu3
1.Beijing University of Petrochemical Technology;
2.AVIC APC Integration Equipment Co., Ltd.;
3.AVIC Xi’an Aero-engine Ltd.
Xing-yu Tai;Kai-hua Li;Yun Li;Ji-gang Meng; Zhong-
hui Xiao;Jian-wei Li
Shenyang Blower Works Group Corporation
·· 24
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov PUMPS AND HYDROTURBINES English Session
Meeting Room:Hui Jian Hal Chairman: Shu-hong Liu
Time
14:00-14:40
14:40-15:20
15:20-15:40
15:40-16:00
No./ Title
☆202010965 (Invited Talk)
Analysis of cavitation erosion risk in a water jet
pump
☆2020101026 (Invited Talk)
Developing innovative active flow control so-
lutions for hydropower in the frame of
the AFC4Hydro project
202004845
Study on the calculation method for pumping pro-
cess in a vacuum system
Coffee Break
Author/Affiliation
Richard Bensow
Chalmers University of Technology,Sweden
Xavier Escal
Universitat Politècnica de Catalunya (UPC),Spain
Si Huang1;Jia-wei Guo1;Tian-kun Yi1;Song-feng Li2;Tai-
zhong Wu2
1.School of Mechanical and Automotive Engineering, South
China University of Technology;
2.Guangdong Kenflo Pump Co., Ltd.
·· 25
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov PUMPS AND HYDROTURBINES English Session
Meeting Room:Hui Jian Hall Chairman: Zhi-gang Zuo
Time
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
18:00-18:20
No./ Title
2020101024
Data reduction procedure for two-phase flow perfor-
mance analysis in centrifugal pumps
202004837
Research the influence of hydraulic model on vibra-
tion of pump
201912682
Analysis of image filling of impeller blade region in
piv particle image in centrifugal pump
201909529
Numerical study on internal flow characteristics of a
semi- open centrifugal impeller with splitter blades
under off-design conditions
201912737
Numerical study on hydrodynamic characteristics in
a centrifugal pump at low flow rate based on cycling-
system model
202010999
Effects of openings of guide vane and different flow
rates on flow characteristics in pump mode of pump-
turbine with splitter blades
202009956
The effect of V- shaped cutting of blade outlet edge
on the noise of centrifugal pump
Author/Affiliation
Ya-guang Heng1;Qiao-rui Si1;Wei-bin Zhang1;
Gérard Bois2;Qi-feng Jiang1
1.Key Laboratory of Fluid and Power Machinery,Xihua Uni-
versity;
2.National Research Center of Pumps, Jiangsu University
Feng Zhao;He Li;Duo Liu;Tian-long Cui
1.Shenyang Blower Works Group Co., Ltd.;
2.School of Mechanical Engineering and Automation, North-
eastern University
Xiao-dong Liu;Zhu-qing Liu;Qiang Zhong;Yao-jun Li;
Wei Yang;Zhi-fengYao
College of Water Resources & Civil Engineering, China Agri-
cultural University
Yong-shun Zeng1;Xiao-lin Hao2;Zhi-feng Yao1,3;
Fu-jun Wang1,3;Min Yang2
1.College of Water Resources & Civil Engineering, China Agri-
cultural University;
2.Beijing Aerospace Petrochemical Technology and Equip-
ment Engineering Corporation;
3.Beijing Engineering Research Center of Safety and Energy
Saving Technology for Water Supply Network System
Wen-hui Yin;Xi Wang;Tao Yu;Jie Jian;
Xiang-yuan Zhang;Chen-xing Jiang;Zhi-jun Shuai;
Wan-you Li
College of Power and Energy Engineering, Harbin Engineer-
ing University
Jin- feng Zhang1;Ya- jing Xiao1;Shi- bin Jin2;Hai- kun
Cai1;Hai-qin Song1
1.Jiangsu University;
2.Institute of Quality Supervision and Inspection
Tian-peng Li;Xiao-rui Cheng
LanZhou University of Technology, College of Energy and
Power Engineering;
Key Laboratory of Fluid machinery and Systems
·· 26
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov OPERATIONAL MAINTENANCE AND REPAIR Chinese Session
Meeting Room:Mei Ling Hall Chairman: Hao Sun Da-wei Sun
Time
14:00-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
No./ Title
☆202009954 (Invited Talk)
Technical characteristics and evolution of H- class
advanced industrial gas turbine
☆ (Invited Talk)
Operation and maintenance of 9E gas turbine power
plant
☆202010977 (Invited Talk)
Status evaluation and troubleshoot of rotating ma-
chinery based on vibration signal
201912716
Automatic recognition method of shaft orbit based
on deep learning
Coffee Break
Author/Affiliation
Gang Han
Suzhou Advanced Integrated Mechanical Solutions
Xiao-xiang Feng
Golden Concord Holdings Limited
Min-gang Cheng
Jiangsu Xindaoge Automatic Control Solutions Co.,Ltd.
Fu-min Wang;Xiao-mo Jiang;Sheng-li Xu;
Hai-xin Zhao;Yun-qing Gong
Dalian University of Technology;
Shenyang Blower Group Co., Ltd.
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
202001776
Design and validation of the simulation system of
gas turbine for low heating value syngas
201909522
The root cause analysis and solution for aluminium
blade corrosion
201912734
Bayes- LSTM approach to system identification of
rotating machinery
201912730
Research on deep peak shaving adaptation retrofit of
single-row forced draft fan for a 350MW coal-fired
unit
201912714
Kernel density estimation based bayesian method
for fault identification of rotating machinery
202009934
Reason analysis and solution to rubbing viberation
of import steam turbine
Bo Zhang;Yan-fei Mu;Xin-ming Chen;Shu Yan; Shao-
ping Shi
State Key Laboratory of Coal- Based Clean Energy (Huaneng
Clean Energy Research Institute
Da-jiang Li
Howden Hua Engineering Co.,Ltd.
Lin Lin1;Xiao- mo Jiang1;Sheng- li Xu1;Fu- min Wang1;
Yun-Qing Gong2
1.Dalian University of Technology; 2.Shenyang Blower Works
Group Monitoring and Control Co., Ltd.
Hong Yan1;De-sheng Chen1;Jin Zheng1;Bo Yang2
1.Xi’an Thermal Power Research Institute Co., Ltd. ;
2.Chinalco Ningxia Energy Group Liupanshan Thermal Power
Plant
Hai- xin Zhao1;Xiao- mo Jiang1;Sheng- li Xu1;Lin Lin1;
Yun-qing Gong2
1.Dalian University of Technology;
2.Shenyang Blower Group Co., Ltd.
Xi-De Zhang1;Abudurehemu.tuohuti1;Zi-long Wang1;
Kai-fa Wang2;De-liao Yang1;Yu Hu1
1.China Petroleum Tarim Petrochemical Company;
2.China Petroleum Tarim Oilfield Company
·· 27
The Fourth Chinese International Turbomachinery Conference & Exhibition
1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS Chinese Session
Meeting Room:Dong Shan Hall Chairman: Tong Wang
Time
14:00-14:20
14:20-14:40
14:40-15:00
15:00-15:20
15:20-15:40
15:40-16:00
No./ Title
202004848
Stall flow field analysis of centrifugal compressor
vaned diffuser based on DMD
202009945
Research on the effect of blended blade tip and wing-
let on aerodynamic performance of a axial fan
201912695
Steady and unsteady analysis of tip-leakage vortex
202001766
Research on axial thrust calculation method of
shrouded impeller in centrifugal compressor
201912671
Study on the influence of dynamic/static interfer-
ence on the integrated stationary blade of multistage
centrifugal compressor
Coffee Break
Author/Affiliation
Zheng Guo1;Sheng-li Xu1;Ming-zhou Wang1;
Ji-gang Meng2;Qiang Zhao2
1.School of Energy and Power Engineering, Dalian University
of Technology ;
2.Shenyang Blower Works Group Corporation
Chun Zhang1;Ling Zhou2;Jing-bo Tan2;Lu-cheng Ji1
1.School of Aerospace Engineering, Beijing Institute of Tech-
nology;
2.Institute for Aero Engine, Tsinghua University
Wei Tan;Zi- qing Zhang;Xiao Qu;Ying- jie Zhang; Xin-
gen Lu;Yan-feng Zhang
Laboratory of Light-duty Gas-turbine, Institute of Engineering
Thermophysics;
University of Chinese Academy of Science
Fu-an Lu;Ji-qiong Ren;Yu-ying Sun;Wei-nan Jin;
Qiang Zhao;Yue-kun Qu
Shenyang Blower Works Group Corporation
Chun-yang Li;Chun-jun Ji;Ling-xuan Du;Jun-yi Fang
Dalian University of Technology
·· 28
The Fourth Chinese International Turbomachinery Conference & Exhibition
16:00-16:20
16:20-16:40
16:40-17:00
17:00-17:20
17:20-17:40
17:40-18:00
202009944
Research on influence of circumferential groove cas-
ing treatment on aerodynamic performance of cas-
cade
201909603
Numerical study of the structural parameters and in-
let Reynolds effect on the performance of honey-
comb
202009912
Structure and aerodynamic optimization design of ro-
tatable blade nozzle of turbine
201909597
Multi-objective optimization design method for tur-
bocharger compressor
201909575
Influence of trailing edge thickening on aerodynam-
ic performance of compressor cascade
202001785
The accuracy analysis of unsteady numerical simula-
tion on the compressor models
Jing-bo Tan1;Ling Zhou1;Chun Zhang1;Lu-cheng Ji2
1.School of Aerospace Engineering,Beijing Institute of Tech-
nology;
2.Institute for Aero Engine, Tsinghua University
Yu-ying Sun;Sheng-min Wang;Fu-an Lu;Yun Li
Shenyang Blower Works Group Corporation
Wen-hui Ji;Zhi-wei Shao;Ying Wang
Hadian National Engineering Research Center- Power Equip-
ment Company Ltd.
Gang Chen;Jian- fei Yan;Bi- sheng Sun;Ai- guo Zhu;
Zhuo-pei Zhang
Tianjin North Tianli Turbocharging Technology Co.,Ltd。
Jun Ding;Xiao- peng Xin;Hong- ze Wang;Yong- feng
Sui;Hong- wei Zhang;Ji- bing Lan;Jian- sheng Zheng;
Yao Tu;Qun Zheng
Hangzhou Steam Turbine Co., Ltd.;
College of Power and Energy Engineering, Harbin Engineer-
ing University;
Hangzhou Turbine Power Group Co., Ltd.;
Zhejiang Rancon Turbine Machinery Co.,Ltd.;
Yang Wang;Wen-li Yi;Xiao Guan
Shen Yang Blower Works Group Corporation
1th Nov AERODYNAMIC DESIGN AND OPTIMIZATION: COMPRESSORS Chinese Session
Meeting Room:Dong Shan Hall Chairman: Zhi-heng Wang
Time No./ Title Author/Affiliation
·· 29
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov KEYNOTE LECTURES English Session
Meeting Room:Jia Hua ballroom Chairman: Hong-wei Ma
Time
8:30-9:10
9:10-9:50
9:50-10:20
10:20-11:00
11:00-11:40
No./ Title
☆201912696 (Invited Talk)
Compressor design with highly variable fluid proper-
ties near the critical point and liquid
☆201909576 (Invited Talk)
Use of conversion equations of influence coeffi-
cients on two-plane balancing
Coffee Break
☆2020101033 (Invited Talk)
Advances in the design and performance of vaned
diffusers for centrifugal compressors
☆2020101014 (Invited Talk)
Operating range limitations in high speed compres-
sors - aerodynamic, acoustic coupling and vibrations
at low mass flow rate
Author/Affiliation
Mark R.Anderson
Concepts NREC,US
John J. Yu;Nicolas Peton
Bently Nevada, Baker Hughes, a GE company,US
Stephen Spence
Department of Mechanical, Manufacturing and Biomedical En-
gineering Trinity College Dublin, Ireland,,UK
Xavier Ottavy
Fluid Mechanics and Acoustics Laboratory(Ecole Centrale de
Lyon),France
·· 30
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov AEROELASTIC,SURGE AND STALL English Session
Meeting Room:Hui Jian Hall Chairman: Guo-liang Qin
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:20
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
No./ Title
☆201910623 (Invited Talk)
Study of compressor stall margin enhancement us-
ing tip air injection
202001756
Flow field analysis of surge in a vaneless diffuser
centrifugal compressor by numerical simulation with
plenum model
201912707
Simulation of non-synchronous blade vibration exci-
tation of a FLE fan
Coffee Break
201910624
Numerical investigation of the effect of geometric
mistuning on compressor aerodynamic performance
202001777
A study of stall condition of a multi-stage axial
compressor based on CFD and experimental meth-
ods
202006879
Bifurcation characteristics of airfoil- NESs cou-
pling system
201912697
Performance and stall process of the boundary lay-
er ingesting fan
Author/Affiliation
Hong Yan;Jie Xu
Northwestern Polytechnical University
Cheng Jia1;Guo-liang Qin1;Yi Wang1,2;Qin Cui1
1.Xi'an Jiaotong University;
2.Shenyang Blower Works Group Corporation
Qing-zhe Gao;Yun Zheng;Xiu-bo Jin;Kang Xu
School of Energy and Power Engineering, Beihang University;
Collaborate Innovation Center for Advance Aero-Engine
Dong-ming Cao;Ding-xi Wang;Xiu-quan Huang
Northwestern Polytechnical University
Rui Wang1;Hai-lun Wang1;Shuo Jiang1,2;Jia-jian Tan1;
Hong-kun Li1;Ji-qiong Ren1
1.Shenyang Blower Works Group Corporation;
2.School of Mechanical Engineering, Dalian University of
Technology
Wen- fan Zhang;Gen- biao Zhou;Ya- feng Zhou;Lei
Wang;Jia-zhong Zhang
Xi’an ShaanGu Power Co., Ltd;
School of Energy and Power Engineering, Xi'an Jiaotong
University
Wen-qiang Zhang;Mehdi Vahdati
Imperial College London,UK
·· 31
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov STRUCTURAL DESIGN:STRENGTH & VIBRATION Chinese Session
Meeting Room:Shang Qing Hall Chairman: Yun-dong Sha
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:20
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:20
No./ Title
☆2020101038 (Invited Talk)
A Random Fatigue Strength Analysis and Verifica-
tion Method for Thin-walled Structures
202010972
Shaft configuration analysis of bottoming supercriti-
cal CO2 power unit at off-design conditions
202002807
Analysis of crack propagation of the rotor structural
component
Coffee Break
2020101013
Advanced design based on additive manufacturing
201912662
Experimental study on strength check of spreader
for engine packing case
201909579
Performance optimization based on topological
method of centrifugal compressor
202009923
The influence of key parameters of transient dy-
namics analysis on the accuracy of compressor
blades dynamic calculation
201909538
Numerical simulation of semi-open centrifugal im-
peller axial thrust and method to reduce the axial
thrust
202009901
Design, optimization and experiment research of
turbine impeller assembly for LWD
Author/Affiliation
Yun-dong Sha
Shenyang Aerospace University
Ti-Shun Zhang
SoftInWay
Guang-chen Jiao;Zhi-jie Li
CONSYS GROUP LIMITED
Xiao-dong Kou
PERA Corporation Ltd.
Zhi-shuai Yu;Zhen Tang;Shan Lin;Jia-chao Sun;
Jing Jin
AECC Shenyang Engine Research Institute
Jing Liu;Wen-hao Huo;Jian-bao Yuan;Hao Sun;
Chongqing General Industry (Group) Co., Ltd.
Ting Guo;Xiao Guan;Yue-fang Wang
Dalian Turbomachinery Technology Development Co.,Ltd.
Shenyang Blower Works Group;
Department of Engineering Mechanics, Dalian University of
Technology
Jun-yi Fang;Chun-jun Ji;Chun-yang Li;
Xue-wei Zhang;Qi Sun
Dalian University of Technology
Xiao-jiang Yao1;Shang Jie1;Li Yang2;Yan Chen2
1. China Oilfield Services Limited;
2. NUMECA(Beijing)Software Limited
·· 32
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov AIRCRAFT ENGINE English Session
Meeting Room:Yao Hu Hall Chairman: Li Zhou
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:20
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
No./ Title
☆202003830 (Invited Talk)
Discussion of aeroengine compressor design technol-
ogy development
202004847
The swirl distortion flow field simulation technolo-
gy based on S-shaped inlet
201912728
Acoustic mode identification of broadband noise in
the duct at the fan inlet
Coffee Break
201912721
Calculation and analysis of interaction flowfield
over tiltrotor aircraft in conversion mode
202005867
Design and flow rate improvement of a small aeroen-
gine turbine
202001753
Effect of hot streak- swirl on film cooling perfor-
mance of leading edge of guide vane
202002796
An improved design of a swirl distortion generator
202005870
Effects of inlet distortion on the aerodynamic losses
in a transonic axial- flow fan under different operat-
ing conditions
Author/Affiliation
Zhi-peng Cao
AECC Sichuan Gas Turbine Establishment
Jia-le Wang;Bang-qin Cheng;Lu-ning Feng;
Jun Li;Yao-ze Yao
Aeronautics Engineering College, Air Force Engineering Uni-
versity
Liang-feng Wang1;Wei-yang Qiao2
1.China Aerodynamics Research and Development Center,
2.School of Power and Energy, Northwestern Polytechnical
University
Huan Li;Xiao-jun Wu;Hong-yin Jia;Gui-yu Zhou;
Peng-cheng Cui;Bin Li
Computational Aerodynamics Institute, China Aerodynamics
Research and Development Center
Zhu-yu Jiang;Ming Qiu;Deng-wen Yang
China Aerodynamics Research and Development Center
Xiao Chen; Wei-lin Yi
Beijing University of Technology
Lu- ning Feng;Bang- qin Cheng;Jia- le Wang;Jun Li;
Xiao-wen Fei
Aeronautical Engineering College, Air Force Engineering Uni-
versity
Zhe Yang1;Hanan Lu1;Qiu-shi Li1,2
1. National Key Laboratory of Science and Technology on
Aero- Engine Aero- Thermodynamics, School of Energy and
Power Engineering;
2. Key Laboratory of Fluid and Power Machinery, Xihua Uni-
versity
·· 33
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov PUMPS AND HYDROTURBINES Chinese Session
Meeting Room:Dong Shan Hall Chairman: De-min Liu Chen-xing Jiang
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:20
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
12:00-12:20
No./ Title
☆202009905 (Invited Talk)
Research on key technology of pump turbine of su-
per head pumped storage
202010975
Research on Modeling Method of Rotordynamic
System for Multistage Condensate Pump
201912667
A Review on Hydrodynamic Damping Characteris-
tics of Hydraulic Machinery
Coffee Break
202001757
Multi- objective optimization design of impeller in
multiphase rotodynamic pump
202009930
Study on cutting law of multi-stage centrifugal
pump impeller
201912670
Analysis of influence of outlet angle of guide vane
on pump performance
202002792
The influence of symmetrical drainage hole on the
external characteristics of spiral axial flow gas- liq-
uid mixed transportation pump
202009935
Research on relative velocity field based on time se-
ries of particle images in centrifugal pump
202010995
Automatic optimization of vertical long- axis fire
pump overload based on particle swarm optimiza-
tion algorithm
Author/Affiliation
De-min Liu
Research & Development Center of Dongfang Electric Machin-
ery Co., (DFEM)Ltd.
Ji-gang Meng1;Bai-jun Qiu1;Zhon-hui Xiao1;
Zuo-wen Zhong2;Min Sun2
1.Shenyang Blower Works Group Corporation;
2.Shenyang Blower Works Group Nuclear Pump Co., Ltd.
Yong-shun Zeng1;zhi-feng Yao 1, 2;Fu-jun Wang1, 2;
Ruo-fu Xiao1, 2
1. College of Water Resources & Civil Engineering, China Ag-
ricultural University;
2. Beijing Engineering Research Center of Safety and Energy
Saving Technology for Water Supply Network System
Wen-wu Zhang;Bao-shan Zhu
Tsinghua University
Lei Liu1,2;Heng Zhang1;Li-jun Liu3
1.Department of Fluid Machinery and Engineering, School of
Energy and Power Engineering, Xi’an Jiaotong University;
2.Shenyang Blower Works Group Corporation;
3.Shenyang Industrial Pump Manufacturing Co., Ltd.
Chun-jun Ji ;Ling-xuan Du ;Chun-yang Li ;Mao Shi
Dalian University of Technology
Cheng-kun Yang
College of energy and power engineering, Lanzhou University
of technology
Xiao-dong Liu ;Zhu-qing Liu ;Qiang Zhong;
Fu-jun Wang
China Agricultural University
Jin-feng Zhang;Zhi-jun Yang;Liang-qing Lai2
Hai-qing Song;Cheng-ming Jing
Jiangsu University
·· 34
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov ROTORDYNAMIC AND BEARING English Session
Meeting Room:Boardroom Chairman: Zhi-gangli
Time
8:30-8:50
8:50-9:10
9:10-9:30
9:30-9:50
9:50-10:20
Chairman: Bao-gang Wen
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
No./ Title
201912698
Reliable operation of turbomachinery through bear-
ing upgrades
202009936
Analysis of cage slip in angular contact ball bearing
considering non-newtonian behavior of elastohydro-
dynamic lubrication
202009942
Research on structure characteristics of the helium-
lubricated spiral grooved thrust bearing for helium
turbine expander
202009932
Study on bearing stiffness and its evolution rule un-
der excessive preload
Coffee Break
202009943
Numerical analysis of the static characteristic of ori-
fice-type throttled aerostatic journal bearings
201909562
Torsional Vibration analysis and life accessment of
certain gas turbine generator unit shaft train
202010974
A comparative study on the numerical solution algo-
rithms of gas Reynolds equation
201912654
Experimental study on the performance of the gas
centrifugal seal with continuous injection and dis-
charge of sealing fluid
Author/Affiliation
Jongsoo Kim
Waukesha Bearings,USA
Bao-gang Wen;Mei-ling Wang;Xiang-he Yun;
Xu Zhang;Qing-kai Han
School of Mechanical Engineering and Automation, Dalian
Polytechnic University
Xiao-hua Zhang1,2;Chang-lei Ke1;Kong-rong Li1;
Nan Peng1;Li-qiang Liu1,2;Lian-you Xiong 1,2
1. Technical Institute of Physics and Chemistry, Chinese Acad-
emy of Sciences;
2. University of Chinese Academy of Sciences
Xiang-he Yun1;Ning Li1;Bao-gang Wen2; Qing-kai Han1
1.School of Mechanical Engineering, Dalian University of
Technology;
2.School of Mechanical Engineering and Automation, Dalian
Polytechnic University
Xiao-hua Zhang1,2;Chang-lei Ke1;Bin Dong1;
Nan Peng1;Li-qiang Liu1,2
1.Technical Institute of Physics and Chemistry, Chinese Acade-
my of Sciences;
2. University of Chinese Academy of Sciences
Pei-jiong Yu;Ming Che ;Zhe Deng;Ji-bing Lan ;
Yong-feng Sui;Zhi-yong Yan
Hangzhou Steam Turbine Co.,Ltd.;
Hangzhou Steam Turbine & Power Group Co.,Ltd.;
Yong-liang Wang;Yi Wang;Long-kai Zheng
Dalian Maritime University
Kun-yi Chen;Shuang-xi Li
College of Mechanical and Electrical Engineering,Beijing Uni-
versity of Chemical Technology
·· 35
The Fourth Chinese International Turbomachinery Conference & Exhibition
2nd Nov SEAL TEHCNOLOGY Chinese Session
Meeting Room:Mei Ling Hall Chairman: Xu-dong Peng
Time
8:30-9:10
9:10-9:30
9:30-9:50
9:50-10:20
10:20-10:40
10:40-11:00
11:00-11:20
11:20-11:40
11:40-12:00
No./ Title
☆2020101030 (Invited Talk)
Thoughts of the independent development of dry gas
seals used in high-parameter turbo compressor
2020101006
Research and application of dry gas seal for super-
critical CO2 power generation project
201912704
Experimental study on the leakage performance of
the outward pumping gas film end face seal
Coffee Break
201907474
Numerical and experimental investigation on the
bristle contact deflections characteristics of brush
seals based on ALE algorithm
201912699
Experimental analysis of leakage characteristics of
high speed spiral seal
201912678
Numerical study on the influence of structural pa-
rameters of flexible wire brush seal on leakage char-
acteristics
201912677
Experimental study on leakage characteristics of
ring-lobe floating ring seal
201907475
Numerical and experimental study on adaptive con-
centric performance of floating seal
Author/Affiliation
Xu-dong Peng
Zhejiang University of Technology
Ze-ping Wang
Sinoseal Holding Co, Ltd
Xing-hua Liu;Shuang-xi Li;Hao-ran Liao;Qing-zhan Li
Research Center of Fluid Sealing Technology, Beijing Univer-
sity of Chemical Technology
Chen-yu Du;Dan Sun;Huan Zhao;Guo-chen Zhang
Shenyang Aerospace University
Xiao-zhu Chen;Rao Zheng;Shuang-xi Li;Xiang Zhao
Beijing University of Chemical Technology
Lian-xiang Sha;Shuang-xi Li;Rao Zheng;
Shan-yu Zhang;Yu-hu Ma
Beijing University of Chemical Technology
Xiang Zhao;Run-mei Ma;Shuang-xi Li; Jia-xing Wang;
Xiao-zhu Chen
Beijing University of Chemical Technology
Ping Wang;Dan Sun;Chen-Du Yu;Zhong-Jiao Ze;
Min Zhou
Shenyang Aerospace University
·· 36