· Melbourne - Head office: Unit 3, 266 Bolton Street ELTHAM VIC 3095 t: 03 9431 3500 f: 03 9431 3577 Sydney ... UltraRAE 3000

OH&S

RENTAL EQUIPMENT

2011

Solutions for Workplace and Environmental Monitoring

www.aesolutions.com.au

Melbourne - Head office: Unit 3, 266 Bolton Street ELTHAM VIC 3095 t: 03 9431 3500 f: 03 9431 3577 Sydney - office: Suite14, L2, 6-8 Holden Street ASHFIELD NSW 2131 t: 02 9716 5966 f: 02 9716 5988 Perth - office: Unit 7, 64 Bannister Road CANNING VALE WA 6155 t: 08 9456 4111 f: 08 6253 8928

[email protected] [email protected] [email protected] book on-line: www.aesolutions.com.au V2011.1

Active Environmental Solutions is a wholly owned Australian company formed in November 2001.

Our head office is located at Unit 3, 266 Bolton Street, Eltham, Victoria with offices in New South Wales, Western Australia and distribution Australia wide.

We supply a quality range of products from leading international manufacturers such as:RAE Systems• Gas Detectors, Radiation, VOC detectorsSK• C Inc Air sampling equipment and sampling mediaLa• rson Davis Noise, sound level and vibration meters TSI• Indoor air qualityOHD• Face Fit TestingArizona Instruments• Mercury MonitorsHQ Inc• Core Body Temperature

Active Environmental Solutions runs a Quality Management system to ISO 9001:2008

Our staff combine over 50 years of industry expertise and experience and we believe in finding the most cost effective and innovative solutions for the environmental and workplace monitoring needs of our customers.

We believe in the importance of superior customer satisfaction and after sales service.

Our service department is supported by qualified technicians to ensure that the correct and efficient maintenance requirements of your instruments are met. Our Service Van is also available for on-site service work.

We have an extensive range of instruments in our hire fleet for long or short term requirements Australia wide. These instruments are the newest models available and are calibrated before each rental, and serviced regularly. We can also provide all the consumables such as filters, sorbent tubes, detector tubes, etc. to complete the monitoring or survey task at hand.

Please contact us for all your monitoring requirements.

Service Workshop and On-Site Service

Rental Equipment

Company History

Sales and Technical Expert Advice

PAGE 2

PAGE 3

RAE Detector Tubes & Pumps... Gas Detection Tubes ..................................................................................4ToxiRAE Pro PID ... Personal Wireless Capable Monitor for VOCs .........................................5QRAE II ... Compact Multi-Gas Detector for H

2S, CO, O

2, and Combustibles ..........6

QRAE Plus ... Four-GasConfinedSpaceGasDetector ..................................................7MultiRAE Lite ... Wireless Portable 1 to 6 MultiGas Monitor 0-1000ppm ...........................8MultiRAE ... Wireless Portable 1 to 6 MultiGas Monitor 0-5000 ppm .........................9VRAE ... Hand-Held Five Gas Survey Monitor .........................................................10MiniRAE Lite ... Portable Handheld VOC Monitor non-datalogging ..................................11MiniRAE 3000 ... Portable Handheld VOC Monitor ...............................................................12ppbRAE 3000 ... Portable Handheld VOC Monitor - 0-9999ppb ..........................................13UltraRAE 3000 ... SpecificCompoundMonitor ......................................................................14MeshGuard ... Rapidly Deployable, Wireless Multi-gas Monitoring System ..................15AreaRAE ... Rapidly Deployable, Wireless Multi-gas Monitor .....................................16GammaRAE II R ... Personal Radiation Detector and Dosimeter ............................................17DoseRAE 2 ... Electronic Dosimeter for Personal Radiation Dosage Monitoring .........18NeutronRAE II ... Personal Neutron and Gamma Radiation Detector .................................19QuickTake 30 ... High Flow Pump for Bioaerosol and Asbestos Sampling ......................20Biological Sampler ... Sampl’air - microbial air sampler ..............................................................21Heat Stress Monitor ... QUESTemp Series Monitors ......................................................................22CorTempTM ... Core Body Temperature Monitor ...............................................................23Jerome®J405 ... Mercury Vapour Analyser ..........................................................................24Formaldehyde Monitor ... Z300XP .........................................................................................................25QuantifitOHD ... Respirator Face Fit Testing ........................................................................26Light Meters ... Heavy Duty Light Meter ..............................................................................27Real Time Dust ... TSI DustTrak Portable Dust Monitor .........................................................28Q-TRAK ... Indoor IAQ - CO2 CO Temperature and Humidity .....................................29P-TRAK ... UltrafineParticleCounter ..........................................................................30VelociCalc IAQ ... Air Velocity Meter-Multifunction Ventilation meter ..................................31Air Sampling Pumps ... from SKC .....................................................................................................32Air Sampling Pumps ... from SKC .....................................................................................................33Defender ... DEFENDER Primary Standard Calibrator .................................................34Sampling Accessories ... SKC, RAE Systems, Larson Davis & TSI ..................................................35703P Noise Dosimeters ... from Larson Davis ......................................................................................36706RC Noise Dosimeters ... from Larson Davis ......................................................................................37Sound Level Meters Type 1... System 824 SLM and LTX1 ........................................................................38Sound Level Meters Type 2... Type 2 Sound Level Meter ..........................................................................39Vibration: HVM ... Larson Davis: Human Vibration Monitor .................................................40What is a Photoionization Detector (PID)? ..............................................................................................................................41Helpful Information ... .................................................................................................................................42

Table of ContentsItem Product Page

Ordering Information email: [email protected]

Melbourne: 03 9431 3500Sydney: 02 9716 5966 Perth: 08 9456 4111

All prices are exclusive of 10% GST and freight

Why Choose Tubes Over Traditional Gas Monitors?RAE Systems detection tubes are used over other analytical methods primarily for their simplicity of use, quick response time, low cost, and ease of maintenance. Since each tube is pre-calibrated, the user does not need any calibration equipment.

RAE Detector Tubes & Pumps Gas Detection Tubes

Colorimetric Gas Detection Tubes

RAE Systems’ large selection of Colorimetric Detection Tubes offer quick, on-the-spot measurements of many gases and vapors at a low cost. The tubes are easy to read with a sharp, clear color change, provide accuracy with no need for calibration, and are manufactured by RAE Systems.

Key Features: RAE TubesEasy to read•

Easy to use•

Low cost•

Flexible•

Fast•

Specific•

Maintenance-free•

Multi-Gas detection•

Accurate •

Key Features: RAE PumpSolid metal construction with RAE • Systems’ exclusive lifetime warranty

Springless piston design for accurate • 50 and 100 cc volumes

Tube tip breaker and glass tip holder•

Clear end-of-flow indicator•

Tapered inlet design avoids leaks with • different diameter tubes

Simple stroke counter•

Addit ional accessories include • remote sampling hoses with 5 m or 11 m lengths

Gas Tubes Available

Acetone (C3H6O)

Amines (RNH2)

Ammonia (NH3)

Benzene (C6H6)

Butane (C4H10)

Carbon Dioxide (CO2)

Carbon Monoxide (CO)

Chlorine (Cl2)

Chlorine Dioxide (ClO2)

Diesel Fuel & Jet Fuel

Ethanol (C2H6O)

Formaldehyde (CH2O)

Gasoline (CnHm)

Hydrocarbons (HC)

Hydrogen Chloride (HCl)

Hydrogen Cyanide (HCN)

Hydrogen Fluoride (HF)

Hydrogen Sulfide (H2S)

MEK-Methyl Ethyl Ketone (C4H8O)

Mercaptans (RSH)

Methyl Bromide (CH3Br)

Nitrogen Dioxide (NO2)

Nitrogen Oxides (NOxv)

Ozone (O3)

Phenol (C6H6O)

Phosphine (PH3)

Sulfur Dioxide (SO2)

Toluene (C7H8)

Trichloroethylene (C2HCl3)

Vinyl Chloride (C2H3Cl)

Water Vapor (H2O)

Xylene (C8H10)

Others available on request

PAGE 4

Piston PumpHIRE RATES:

DAY: $ 50.00

WEEK: $105.00

MONTH: $215.00

Purchase tubes separately (box of 10 tubes)




ToxiRAE Pro PID Personal Wireless Capable Monitor for VOCs

The ToxiRAE Pro PID is the world’s smallest wireless volatile organic compounds (VOC) monitor. The ToxiRAE Pro PID takes worker protection to the next level by providing safety professionals wireless access to real-time instrument readings and alarm status from any location for better visibility and faster response.

Key Features Featuring RAE Systems’ next-generation PID sensor, the ToxiRAE Pro PID can promptly detect and accurately monitor over 300 VOCs. With an onboard library of 190 correction factors, the ToxiRAE Pro PID can be programmed to automatically read in concentrations of the specified compound.

Wireless access to real-time instrument • readings and alarm status from any location

Unmistakable five-way local and remote • wireless notification of alarm conditions

Reliable, rugged, and intrinsically safe •

Largest display in its class •

Continuous datalogging •

Fully automated bump testing and calibration • with AutoRAE 2

User-replaceable sensor, filter, fan, and • Lithium-ion battery

Wireless Wireless Network - RAE Systems Dedicated Wireless Network Wireless Frequency - ISM license-free bands Wireless Range - (Typical) 100 meters

Size 118 x 60 x 30 mm

Weight 235 g

Sensor Photoionization sensor with 10.6 eV (standard) or 9.8 eV lamp (contact us for availability) lamp. Response time (T90)< 15 sec. (Isobutene). Field-replaceable sensor. Easy access to lamp for cleaning

Datalogging - Continuous datalogging with a three-month capacity (at one-minute intervals)- User-configurable datalogging interval (from 1 to 3,600 seconds)

Sampling Diffusion

Detectable Gases A wide variety of ionizable chemicals using 190 built-in and over 300 published correction factors

Display readout

- Real-time reading of VOC concentrations in parts per million or mg/m3; battery status; data logging on/off; wireless on/off and reception quality- STEL, TWA, and peak values- Calibration and measurement gases; correction factors

BatteryRechargeable Lithium-ion battery- Operating time: > 12 hours (normal operation)- Recharge time: < 4 hours through charging cradle

Dust and Water Resistance

Dust and Water Resistance IP-54 rating for dust and water ingress protection (validated by an independent test laboratory)

Specifications

PAGE 5

Applications Industrial Hygiene & Safety

Oil and gas • Chemical plants • Pharmaceutical plants • Government health, safety, security, • and environmental agencies Hazardous materials teams, first • responders

Environmental Applications Environmental consulting • Soil remediation •

WORLD’S SMALLEST

ToxiRAE PRO PIDHIRE RATES:

DAY: $ 70.00

WEEK: $290.00

MONTH: $700.00




Key FeaturesPump or Diffusion models available• Rechargeable Lithium-Ion battery • pack provides up to 14 hours of continuous operation.Best EMI/RFI immunity technology for • products in its class, eliminating radio interferenceEasy access to pump, sensors, filter • and battery compartment without exposing electronic components to potential damageIP-65 water- and dust-resistant case• Strong, protective, concussion-proof • designIntuitive simple-to-operate two-button • user interface

QRAE II Compact Multi-Gas Detector for H2S, CO, O

2, and Combustibles

Why Solid Polymer Electrolyte Technology for Oxygen Measurement?Patented SPE O2™ Oxygen sensor with unique features:

Lead-f ree design that already • complies with future RoHS StandardExtended life compared to lead-type • electrochemical oxygen sensors, resulting in low cost of ownershipLeak- f ree des ign, min imiz ing • downtimeIncreased long-term stability•

The QRAE II is a full-featured, compact, one- to four-sensor gas detector for detection of hydrogen sulfide, carbon monoxide, oxygen and combustibles. Key features include easy-to-change, externally accessed battery packs (available in rechargeable and alkaline versions), a water-resistant case and a new state-of-the-art O

2 sensor with extended life.

Display can be flipped 180º with the push • of a button for easy viewing from belt or handMulti-language support• Loud 95 dB audible alarm• Bright red flashing visible alarm• Vibration alarm• Large graphic display for easy overview of • gas type and concentrationRugged housing withstands harsh • environments

DetectorSpecificationsSize 12.5 cm x 7.2cm x 3.8cm (dff) 12.5 cm x 7.2cm x 6cm (pump)Weight Pump: 350 g Diffusion: 250 gOperating Period

Diffusion: Up to 14 hours continuous operation with Lithium-ion battery, up to 10 hours with alkaline battery (typical, without alarm)Pump: up to 10 hours with Lithium-ion battery, up to 8 hours with alkaline battery

Datalogging Standard 12 days at one-minute intervalsOperating Temperature

-20° to 50° C for T4 temperature code

Approvals: IECEx

SpecificationsDefault Sensor Settings

Gas Monitor Range Resolution

Oxygen 0 to 30.0% 0.1%

Combustible 0 to 100% LEL 1% LEL

Carbon Monoxide 0 to 1000 ppm 1 ppm

HydrogenSulfide 0 to 100 ppm

0 to 1000ppm

0.1 ppm

1ppm

Sulfur Dioxide 0.1 to 100 ppm 0.1 ppm

PAGE 6

IECEx a

pproval

QRAE IIHIRE RATES:

DAY: $ 50.00

WEEK: $200.00

MONTH: $500.00




Key FeaturesOne to four plug-in “smart” sensors•

Combustibles ►

Oxygen (O ► 2)

Hydrogen Sulfide (H ► 2S)

Carbon Monoxide (CO) ►

Optional toxic sensors• Sulfur Dioxide (SO ► 2)

Nitric Oxide (NO) ►

Nitrogen Dioxide (NO ► 2)

Chlorine (Cl ► 2)

Hydrogen Cyanide (HCN) ►

Ammonia (NH ► 3)

Phosphine (PH ► 3)

Rechargeable Lithium-ion battery •pack provides up to 20 hours of continuous operation

Strong, built-in sample draw pump• draws up to 30 meters horizontally or vertically

QRAE Plus Four-GasConfinedSpaceGasDetector

What is a Confined Space?Confined space entries are part of a daily routine throughout the industrial workplace.

A Conf ined Space Is Def ined As a Space that:

Is large enough for an employee to enter • and perform work

Has limited or restricted means for entry • or exit

Is not designed for continuous human • occupancy

The QRAE Plus is a full-featured, compact, two- to four-sensor confined space gas detector. Key features include easy-to-change, externally accessed battery packs (available in both alkaline and rechargeable versions) and a water-resistant case. The rechargeable, Lithium-ion battery pack provides up to 20 hours of continuous operation.

SpecificationsSensorSpecifications


Oxygen 0 to 30.0% 0.1%



HydrogenSulfide 0 to 100 ppm 1 ppm

Sulfur Dioxide 0 to 20.0 ppm 0.1 ppm

Nitric Oxide 0 to 250 ppm 1 ppm

Nitrogen Dioxide 0 to 20.0 ppm 0.1 ppm

Chlorine 0 to 10.0 ppm 0.1 ppm

Hydrogen Cyanide 0 to 100 ppm 1 ppm

Ammonia 0 to 50 ppm 1 ppm

Phosphine 0 to 5.0 ppm 0.1 ppm

Size 11.5cm x 7.6cm x 4.6cm

Weight 425g with battery, without rubber boot

Operating Period

Pump: Up to 16 hours continuous operation with Lithium-ion battery, up to 12 hours with alkaline battery (typical without alarm)

Datalogging Standard 67 hours at one-minute intervals, with serial number of unit, user ID, site number, calibration date

Operating Temperature

-20° to 45° C

DetectorSpecifications

PAGE 7

QRAE PlusHIRE RATES:

DAY: $ 50.00

WEEK: $200.00

MONTH: $500.00




MultiRAE Lite Wireless Portable 1 to 6 MultiGas Monitor 0-1000ppm

with VOC detection 0 - 1000 ppm

The MultiRAE Lite’s wireless capability raises worker protection to the next level by providing safety officers real-time access to instrument readings and alarm status from any location. Better visibility and faster incident response. One-to-six gas monitoring solution.

Key FeaturesWireless. Versatile. Proven.

Wireless access to real-time instrument readings and alarm status from any location• Unmistakable five-way local and remote wireless notification of alarm conditions• 30 interchangeable sensor options, including PID(*) for VOCs, NDIR(*) and catalytic for • combustibles, and NDIR for CO2Intelligent sensors store calibration data, so they can be swapped in the field (*)• Large graphical display with easy-to-use, icon-driven user interface• Continuous datalogging (6 months for 5 sensors, 24x7)•

(* ask us how)

Sensor

PID Sensor VOC 10.6eV 0 to 1,000 ppm (resolution 1ppm)Combustible SensorsCatalytic LELNDIR (0-100% LEL Methane)NDIR (0-100% Vol Methane)Carbon Dioxide SensorCarbon Dioxide (CO2) NDIRElectrochemical SensorsAmmonia (NH3)Carbon Monoxide (CO) Carbon Monoxide (CO) H2-comp.CarbonMonoxide(CO)+HydrogenSulfide(H2S) comboChlorine (Cl2)Chlorine Dioxide (ClO2)Ethylene Oxide (EtO-A) (EtO-B) (EtOC)Formaldehyde (HCHO)Hydrogen Cyanide (HCN)HydrogenSulfide(H2S)Methyl MercaptanNitric Oxide (NO)Nitrogen Dioxide (NO2)Oxygen (O2)Phosphine (PH3)Sulfur Dioxide (SO2)

PAGE 8

IECEx a

pproval

MultiRAE LiteHIRE RATES:

DAY: $ 70.00

WEEK: $280.00

MONTH: $790.00




MultiRAE Wireless Portable 1 to 6 MultiGas Monitor 0-5000 ppm

with VOC detection 0-5000 ppm

The MultiRAE Lite’s wireless capability raises worker protection to the next level by providing safety officers real-time access to instrument readings and alarm status from any location. Better visibility and faster incident response. One-to-six gas monitoring solution.

Key FeaturesWireless. Versatile. Proven.

Wireless access to real-time instrument readings and alarm status from any location• Unmistakable five-way local and remote wireless notification of alarm conditions• Over 30 interchangeable sensor options, including 0.1 to 5,000 ppm PID• Extensive on-board gas libraries (190 VOCs and 55 combustible gases) • Intelligent sensors store calibration data, so they can be swapped in the field (*)• Large graphical display with easy-to-use, icon-driven user interface• Continuous datalogging (6 months for 5 sensors, 24x7)•

(* ask us how)

SensorPID Sensor VOC 10.6eV 0 to 5,000 ppm (resolution 0.1ppm)Combustible SensorsCatalytic LELNDIR (0-100% LEL Methane)NDIR (0-100% Vol Methane)Carbon Dioxide SensorCarbon Dioxide (CO2) NDIRElectrochemical SensorsAmmonia (NH3)Carbon Monoxide (CO) Carbon Monoxide (CO) H2-comp.CarbonMonoxide(CO)+HydrogenSulfide(H2S) comboChlorine (Cl2)Chlorine Dioxide (ClO2)Ethylene Oxide (EtO-A) (EtO-B) (EtOC)Formaldehyde (HCHO)Hydrogen Cyanide (HCN)HydrogenSulfide(H2S)Methyl MercaptanNitric Oxide (NO)Nitrogen Dioxide (NO2)Oxygen (O2)Phosphine (PH3)Sulfur Dioxide (SO2)

PAGE 9

IECEx a

pproval

MultiRAEHIRE RATES:

DAY: $ 80.00

WEEK: $320.00

MONTH: $880.00




Key FeaturesToxic sensors include CO, H• 2S, SO2, NO, NO2, Cl2, NH3, HCN, PH3

Large alarm activated backlit LCD • display

Visual alarm with flashing LED•

Large keys usable with gloved hand•

Rigid inlet probe•

10 hours continuous operation•

Sample collection port•

The VRAE is a powerful, pumped, one-to-five gas monitor that monitors combustibles in the percent by volume range, regardless of oxygen levels. The VRAE is capable of monitoring either combustibles, oxygen, and three toxic gases or combustibles and four toxic gases. Its durable NiMH battery, powerful internal pump and rugged case make it ideal for leak detection and site surveys.

PAGE 10

VRAE Hand-Held Five Gas Survey Monitor

Opt iona l 16 ,0 0 0 data po in ts • downloadable to PC

Strong protective rubber boot•

Internal sample draw pump for quick • response and remote sampling

Smart battery charging with status • indication and LED indicator

Snap-in regargeable NiMH or alkaline • battery pack

48 built-in correction factors for LEL • sensor

Sensor Range Extended Range Resolution

Combustible 0 to 100% LEL 0 to 100% VOL

— 1%

Oxygen 0 to 30.0% — 1%

Carbon Monoxide 0 to 500 ppm 1,500 ppm 1 ppm

HydrogenSulfide 0 to 100 ppm 500 ppm 1 ppm

Sulfur Dioxide 0 to 20.0 ppm 150 ppm 0.1 ppm

Nitric Oxide 0 to 250 ppm 1,000 ppm 1 ppm

Nitrogen Dioxide 0 to 30.0 ppm 150 ppm 0.1 ppm

Chlorine 0 to 10.0 ppm 30 ppm 0.1 ppm

Hydrogen Cyanide 0 to 100 ppm 100 ppm 1 ppm

Ammonia 0 to 50 ppm 200 ppm 1 ppm

Phosphine 0 to 5.0 ppm 20 ppm 0.1 ppm

Size 21 cm x 7.6 cm x 4.9 cm

Weight 568g with battery pack

Operating Hours 10 hours continuous operation

Datalogging Optional 16,000 points (53 hours, 5 channels at one minute intervals)


-20° C to 45° C


Why VRAE?VRAE is unique due to its ability to utilize up to four toxic sensors at once.

It also offers a unique TC sensor that can be used in atmospheres lacking oxygen (inert) and can monitor both LEL and Vol% measurements.

Specifications

VRAEHIRE RATES:

DAY: $ 60.00

WEEK: $220.00

MONTH: $550.00




Additional AdvantagesDuty-cycling™ lamp and sensor • auto-cleaning technologyTough, flexible inlet Flexi-Probe™• Large keys are operable with 3 layers • of glovesStrong, built-in sample pump draws up • to 30m horizontally or verticallyLoud, 95 dB audible alarm• Bright red flashing visible alarm• Interchangeable drop-in Lithium-ion • and alkaline battery packs

Key FeaturesProven PID technology—The patented • sensor

Provides the following unique features:•

3-second response time ►

range up to 5,000 ppm ►

humidity compensation ►

Designed for service—Easy access • to lamp and sensor in seconds without tools

Big graphic display for easy overview of • concentration

Field-interchangeable battery pack, • replaceable in seconds without tools

Integrated flashlight for better visibility • in low light

The MiniRAE Lite handheld volatile organic compound (VOC) monitor. Its photoionization detector’s (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.

Sensors Photoionization sensors with standard 10.6eV lamp

Battery Alkaline battery adapter and/or External field-replaceable lithium-ion battery pack, if specified

Operating Period 12 hours of operation on alkaline battery adapter(12 hours with lithium-ion battery pack)

Hazard Area Approval IECEx

Datalogging No

IP Rating IP-65

Direct ReadoutInstantaneous reading of: VOCs as ppm by volume High and Low values Date and Time

Alarms 95dB buzzer (at 30cm) and flashing red LED to indicate exceeded preset limits


SpecificationsSensorSpecificationsGas Range (ppm) Resolution

(ppm)Response Time T90

VOCs 0 to 999.9 0.1 < 3 seconds

VOCs 1000 to 5,000 1 < 3 seconds

Rugged housing withstands use in • harsh environments

IP-65 design ►

Strong, protective removable ►

rubber boot

PAGE 11

MiniRAE Lite Portable Handheld VOC Monitor non-datalogging

MiniRAE LiteHIRE RATES:

DAY: $ 65.00

WEEK: $270.00

MONTH: $650.00




MiniRAE 3000 Portable Handheld VOC Monitor

MiniRAE 3000 Users

Industrial hygienists, Certified •engineers and Prevent ive maintenance consultants

can quickly receive and exchange ►

data via the MiniRAE 3000’s built-in RF modem, ensuring real-time data is available as needed, without delay.

Maintenance, process and •Production managers

will appreciate the handheld unit’s ►

extended lamp life, its self-cleaning capabilities and easy access to its sensor lamp, minimizing downtime.

Corporate clean-up teams, •Environmental engineers and consultants and Government Agencies

recognize the MiniRAE 3000 as the ►

must-have tool crucial to isolating contaminated soil and pollution mapping for environmental cleanup sites.

Key FeaturesProven PID technology. The patented • sensor provides the following unique features:


Extended range up to 15,000 ppm ►

with improved linearityHumidity compensation with ►

integrated humidity and temperature sensors

Real-time wireless data transmission • with built-in RF modem or Bluetooth®

Easy access to lamp and sensor in • seconds without tools Large graphic display for easy overview • of gas type, Correction Factor and concentrationIntegrated flashlight for visability in low • light conditionsIntegrated RAE Systems Correction • Factors list for more than 200 compounds to measure more chemicals than any other PIDIP-67 waterproof design• Snap-in replacement battery pack•

The MiniRAE 3000 is the most advanced handheld volatile organic compound (VOC) monitor on the market. Its extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene to leak detection and HazMat. The RF modem allows real-time data transmissions with a base controller located up to 3.2 kilometres with optional RAELink3 portable modem.


Weight 738 g

Operating Period

16 hours of operation (12 hours with alkaline battery)

Datalogging Standard 6 months at one-minute intervals

Direct ReadoutInstantaneous reading: VOCs as ppm by volume, high values, STEL and TWA, battery and shutdown voltage, date, time and temperature.


SpecificationsSensorSpecificationsGas Range Resolution Response Time T90

VOCs 0 to 999.9 ppm 1,000 to 15,000 ppm

0.1 ppm 1 ppm

< 3 seconds < 3 seconds

PAGE 12

MiniRAE 3000HIRE RATES:

DAY: $ 70.00

WEEK: $290.00

MONTH: $700.00




ppbRAE 3000 Portable Handheld VOC Monitor - 0-9999ppb

ppbRAE 3000 UsesHaz• Mat teamsFirefighters•Arson investigators•

all know they can depend on the ►

ppbRAE 3000 to be rugged and ready for duty when they need it. The unit operates for extended periods thanks to a long life, drop-in lithium-ion battery pack.

Government Agency personnel•will appreciate RAE System’s three- ►

button user interface. Oversized buttons enable ease of use while wearing gloves. The ppbRAE 3000’s 95dB acoustic alarm is readily heard in the noisiest environments and its ultra-bright optical alarm is highly visible and easy to notice. The built-in flashlight provides additional safety and functionality in dark conditions.

Decontamination personnel• will appreciate the IP-67 rating during ►

cleaning and decontamination in water.

Key FeaturesProven PID technology. The patented • sensor provides the following unique features:


Extended range from 1 ppb to ►

10,000 ppm with improved linearityHumidity compensation with ►

integrated humidity and temperature sensors

Real-time wireless data transmission • with built-in RF modem or BluetoothDesigned for simple service • Easy access to lamp and sensor in • seconds without tools Big graphic display for easy overview • of gas type, Correction Factor and concentrationIntegrated flashlight for better view in • dark conditionsIntegrated RAE Systems Correction • Factors list for more than 200 compounds to measure more chemicals than any other PIDIP-67 waterproof design for easy cleaning • and decontamination in water

The ppbRAE 3000 is the most advanced handheld volatile organic compound (VOC) monitor on the market. Its extended range of 1ppb to 10,000 ppm makes it an ideal instrument for applications from HazMat/Homeland Security and industrial hygiene to indoor air quality and military applications. The RF modem allows real-time data transmissions with a base controller located up to 3.2 kilometres with optional RAELink3 portable modem.


Weight 738 g

Operating Period

16 hours of operation (12 hours with alkaline battery)

Datalogging Standard 6 months at one-minute intervals

Keypad 1 operation and 2 programming keys, 1 flashlight on/off


SpecificationsSensorSpecificationsGas Range Resolution Response Time T90

VOCs 0 to 9999 ppb10 to 99 ppm 100 to 999.9 ppm 1000 to 9999 ppm

1 ppb 0.01 ppm0.1 ppm 1 ppm

< 3 seconds < 3 seconds < 3 seconds< 3 seconds

PAGE 13

ppbRAE 3000HIRE RATES:

DAY: $ 90.00

WEEK: $350.00

MONTH: $990.00




Key FeaturesProven PID technology•

3-second response in VOC mode or ► 60 seconds in compound-specific mode

Extended range up to 10,000 ppm ► (in VOC mode) with improved linearity

Humidity compensation with built-in ►

humidity sensor

Automatic temperature-controlled ►

sampling time calculation

Detects benzene down to 50 ppb (0.05 ►

ppm)

Unique 15-minute benzene STEL • calculation with 15-minute real-time benzene-specific measurement and recording

Highly specific readings, combining a •

The UltraRAE 3000 - Compound-Specific Monitor. Its Photoionization Detector’s (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring. The RF modem allows real-time data transmissions with a base controller located up to 3.2 kilometres with optional RAELink3 portable modem.

SpecificationsSensorSpecifications*Gas Range Resolution Response Time (T90)VOCs 0 to 99.99 ppm 0.05 ppm < 3 sec

100 to 999.9 ppm 0.1 ppm < 3 sec

1000 to 9999 ppm 1 ppm < 3 sec

Benzene 0 to 200 ppm 0.05 ppm < 60 sec

Butadiene 0 to 200 ppm 0.05 ppm <60 sec* Specifications are subject to change

Size 25.5 x 7.6cm x 6.4cm

Weight 738g

Operating Period

16 hours of operation

Datalogging Standard 6 months at 1 minute intervals

Communication Download date and upload instrument setup from PC through charging cradle. Wireless data transmission through built-in BlueTooth.

Battery• Rechargeable, external field-replaceable lithium-ion battery pack• Alkaline battery adapter


9.8eV UV lamp and RAE-Sep™ benzene tube

New sampling probe design • provides instant tube-breakthrough visibility

Application• Confined space entry pre-screening during refinery and plant maintenance

• Hazardous material response

• Marine spill response

• Refinery down-stream monitoring

PAGE 14

UltraRAE 3000 SpecificCompoundMonitor

UltraRAEHIRE RATES:

DAY: $ 90.00

WEEK: $350.00

MONTH: $990.00

Purchase specific tubes separately (box of 10 tubes)




FMC 2000 is a multi-channel controller with built-in modem designed for integration with RAE Systems’ MeshGuard intelligent network of connected sensors. The FMC 2000 is the command and control element of the MeshGuard system, gathering data and monitoring alarms from MeshGuard toxic and flammable gas monitors. The built-in wireless modem automatically links up with MeshGuard monitors, and the controller has built-in security safeguards to resist tampering of critical parameters.

Size: 26.5cm x 9.5cm x 5.5cm

Weight: 0.6 kg

Operating range:

300 meters (tyupical)

Approvals: 4,000 points for each sensor with time stamp, serial number, user ID, site ID

Operating Time:

Toxic Gas Sensors:Up to 6 months on internal battery (up to 2 years on external)Flammable Gas Sensor:Up to 5 days on internal battery (up to 22 on external)

Approvals: IECEx Ex ia I/IIC T4

Size: 24cm x 40cm x 9.3cm

Weight: 6.5 kg excluding mounting plate

Datalogging: SD card (1GB)

4,000 points for each sensor with time stamp, serial number, user ID, site ID

Wireless 2.4GHz IEEE 802.15.4/mesh radio

WirelessApprovals:

FCC: QNT-PT2400S20-ACE EN 300320 (RTTE directive)

Housing Stainless Steel

Gas Range Resolution Response TimeCarbon Monoxide (CO) 1 to 500 ppm 1 ppm 30 secHydrogenSulfide(H2S) 0.1 to 100 ppm 0.1 ppm 20 secSulfur Dioxide (SO2) 0.1 to 20 ppm 0.1ppm 30 secFlammables (LEL) 0 to 100 % LEL 1 ppm 15 secOxygen (02) 0-30% 0.1% 15 secChlorine (Cl2) 0-10 ppm 0.1% 30 secAmmonia (NH3) 0-100 ppm 1ppm 90 sec

SensorSpecifications

DetectorSpecifications ControllerSpecifications

PAGE 15

MeshGuard Rapidly Deployable, Wireless Multi-gas Monitoring System

FMC 200 Controller

MeshGuardMeshGuard

MeshGuard

MeshGuard

MeshGuard

MeshGuard SystemHIRE RATES:

WEEK: $400.00 *

MONTH: $1200.00*

(minimum 1 week hire)

* per meshguard unit




Applications• HazMat and Emergency Response • Refineries and Petrochemical Plants • Confined Space Entry • Power Plants • Pulp and Paper Industry • Plant and Mill Turnarounds • Marine and Offshore Wells

The AreaRAE is a 1to5 sensor gas detector equipped with a wireless RF (radio frequency) modem which allows the unit to communicate and transmit readings and other information on a real-time basis with a remotely located base controller. It is also the first “lunchbox”- type multi-sensor instrument able to include a photoionization detector (PID) for parts-per-million measurement of volatile organic compounds (VOCs), as well as LEL, O2 and up to two electrochemical toxic sensors to measure specific toxic substances such as CO and H2S.

Key FeaturesUp to five sensors (PID, LEL, O2 and • two toxic)

Loud buzzer and large, extra-bright • warning light

Large LCD display and keypad •

Rugged, weather-resistant housing•

Built-in pump•

Interchangeable Lithium-ion or alkaline • battery pack

Real-time wireless data transmission • with built-in RF transceiver

View real-time sensor data and alarm • status at headquarters or command center

P r o R A E R e m o t e s o f t w a r e • simultaneously controls and displays readings for up to 32 remote detectors

License-free, ISM band RF transmission • with a communication range of up to 2 miles (extendable with RAELink2 Repeaters)

Toxic sensor socket accepts CO, H2S, • SO2, NO, NO2, Cl2, HCN, NH3, or PH3 sensors

Size 235mm L x 127mm W x 235mm D without handle

Weight 3.9 kg with battery pack

Operating Hours

36 hours continuous stand-alone operation24 hours continuous wireless operation (Lithium-ion battery)18 hours continuous wireless operation (alkaline battery)

Datalogging 4,000 points for each sensor with time stamp, serial number, user ID, site ID


-20° to 45° C

SpecificationsSensor Settings


Oxygen 0 to 30.0% 0.1%


VOCs 0 to 199 ppm 200 to 2,000 ppm

0.1 ppm 1 ppm


Carbon Monoxide 10 to 2000 ppm 10ppm

HydrogenSulfide 0 to 100 ppm 1 ppm

Sulfur Dioxide 0 to 20.0 ppm 0.1 ppm

Nitric Oxide 0 to 250 ppm 1 ppm

Nitrogen Dioxide 0 to 20.0 ppm 0.1 ppm

Chlorine 0 to 10.0 ppm 0.1 ppm

Hydrogen Cyanide 0 to 100 ppm 1 ppm

Ammonia 0 to 50 ppm 1 ppm

Phosphine 0 to 5.0 ppm 0.1 ppm


PAGE 16

AreaRAE Rapidly Deployable, Wireless Multi-gas Monitor

AreaRAEHIRE RATES:

WEEK: $400.00

MONTH: $1200.00

(minimum 1 week hire)

(The Host Controller is also available to rent - please call us for details and pricing)




Key FeaturesSensitive CsI scintillator for excellent • search capability and fast response

Energy-compensated PIN diode • sensor for high dose rate range and accurate dosimeter capabilities

Prominent visible, audible and • vibration alarm alerts

Immersible in water for easy • decontamination

Top-mounted, invertible display•

Continuous digital readout in Rem/hour • or in Sievert/hour and counts-per-second

Two operation keys, simple intuitive • programming

Large, 30,000-point datalog capacity, • downloaded via cable-free Bluetooth® connection

Two AA alkaline batteries last up to • 900 hours

Why GammaRAE II R?Designed specifically to meet the • needs of first responders

Dual functionality: Sensitive detector • and accurate dosimeter in one

Loud Alarm: alerts the wearer with a • loud audible alarm, big, bright flashing LEDs, and a built-in vibration alarm.

Certified intrinsically safe permits • operation in potentially flammable/explosive environments

GammaRAE II R is two instruments in one: it has the rapid response of a detector and the accurate dose measurements of a dosimeter. This instrument contains two separate sensors. The Cesium Iodide (CsI) scintillator provides a fast, two-second response to radiological threats, while the energy-compensated PIN diode provides high dose rate range coverage and accurate dose measurements.

SpecificationsSensors 3cc CsI (Tl) + Photodiode (low channel)

Energy-Compensated PIN Diode (high channel)Energy Range 0.06 to 3.0MeV

Dose Equivalent Rate (DER) for 137Cs

1µR/h to 10 R/h (0.01µSv/h to 0.1 Sv/h)

Accuracy of DER ±20%

Dose Range 1µR to 999.9 R (0.01µSv to 9.9 Sv)

Time to Alarm ≤ 2 seconds

Battery Runtime Up to 900 hours

ApplicationsAccurately measures accumulated • dose to the wearer

Customs and border patrols•

Law enforcement•

HazMat teams•

Fire departments•

Security officers banks, laboratories, • medical facilities, nuclear power facilities

Military and first responders•

PAGE 17

GammaRAE II R Personal Radiation Detector and Dosimeter

GammaRAE II RHIRE RATES:

DAY: $ 90.00

WEEK: $350.00

MONTH: $990.00




Key FeaturesStand-alone electronic dosimeter with • LCD display Multiple units with reader and software • can be used as a dosimetry system Continuous digital dose rate readout • in rem/h, Sv/h and R/h Continuously accumulated total dose • readout in rem,Sv and R • Prominent visible, audible, and • vibration alarms Long calibration life • Two operation keys, simple intuitive • programming Rechargeable, long-lasting battery • life

Applications

Nuclear power plants ►

Environmental survey ►

Fire Departments ►

Hazardous Material Response ►

Teams Police ►

EMS ►

Military ►

Hospitals ►

DoseRAE 2 is a compact, direct-reading and alarming electronic personal radiation detector. It uses a diode and a scintillation crystal to detect X- and gamma radiation, and provides real-time monitoring of personal dose and dose rate. The real-time radiation dose rate monitoring allows immediate reaction in case of radiation occurrences and thus reduces the radiation exposure. By measuring dose equivalent and dose equivalent rate, this detector provides the functions of a dosimeter too. It also measures radiation exposure and exposure rate, which is appropriate for controlling the exposure of emergency responders to photon radiation.

Detector Specifications

Gamma Sensors CsI (TI) + photodiode (low environment radiation)Energy-compensated PIN diode (level of radiation protection)

Dose Rate Range 0.01 μSv/h to 10 Sv/h (1 μR/h to 1140 R/h)

Accuracy of Dose Rate ±20% (from 10 μSv/h to 10 Sv/h or from 1.14 mR/h to 1140 R/h )±30% (from 0.01 μSv/h to 10 μSv/h or 1 μR/h to 1.14 mR/h)

Dose Range 0 μSv to 10 Sv (0 μR to 1140 R)

Dose Accuracy ±15%

Energy Range 20 keV to 6 MeV for X- and gamma radiations

Datalog Size More than 3000 data points

PAGE 18

DoseRAE 2 Electronic Dosimeter for Personal Radiation Dosage Monitoring

DoseRAE 2HIRE RATES:

DAY: $ 50.00

WEEK: $200.00

MONTH: $500.00




Sensor Type of Radiation Detected

Energy Range

3cc CsI (Tl) + Photodiode Gamma 0.06 to 3.0MeV

1cc LiI (Eu) + Photodiode Neutron Thermal to 14MeV

Dose Equivalent Rate (DER) for 137Cs

1 to 4,000µR/h (0.01 to 40µSv/h)

Dose Range (gamma only) 1µR to 999 R (0.01µSv to 9.9 Sv)

Time to Alarm ≤ 2 seconds (gamma) ≤ 5 seconds (neutron)

Battery Runtime Up to 900 hours 2 x AA batteries

Specifications

NeutronRAE II is the first personal radiation detector to provide rapid detection of both neutron and gamma radiation sources even in potentially flammable environments. Certified intrinsically safe and water-immersible for chemical decontamination purposes, the NeutronRAE II can be safely used in more environments than any other personal gamma and neutron radiation detector.

Key FeaturesDetects neutrons from weapons-grade • Plutonium (239Pu) and gamma rays from potential “dirty bomb” materials

Sensitive CsI and LiI scintillators for • excellent search capability and fast response

Prominent visible, audible and • vibration alarms

Immersible in water for easy • decontamination

Top-mounted, invertible display•

Continuous digital readout in • microRem/hour (µR/h) or microSievert/hour (µSv/h) and counts per second (cps) for gamma radiation, and counts per second for neutron radiation

Two operation keys and simple, • intuitive programming

Two AA alkaline batteries last up to • 900 hours

Large, 30,000-point datalog capacity, • downloaded via cable-free Bluetooth® connection

Why NeutronRAE II?Designed to meet the needs of • first responders

The NeutronRAE II is designed • for use in rough environments. It is immersible (IP67) in water for easy decontamination, and a concussion-proof case provides shock protection if the detector is dropped. The two-button operation is designed for use even in Level A protection suits with two layers of gloves.

The NeutronRAE II features fast • response time for both the neutron and gamma radiation. Alarm modes can be set to operate in “Search Mode” based on local background radiation levels or “Safety Mode” providing high and low alarm levels based on absolute dose rates.

PAGE 19

NeutronRAE II Personal Neutron and Gamma Radiation Detector

Neutron RAE IIHIRE RATES:

DAY: $ 135.00

WEEK: $ 525.00

MONTH: $1485.00




QuickTake 30 High Flow Pump for Bioaerosol and Asbestos Sampling

The SKC QuickTake 30® constant flow diaphragm pump maintains a set flow rate throughout the sampling period, compensating for the inherent back pressure created by sampling media and for any increase in back pressure as sample collects on the media.

SpecificationsFlow Range: Flow Compensation Accuracy:

10 to 30 L/min± 5% of set flow

Compensating Flow Back Pressure Range

10 L/min at 90 inches water back pressure20 L/min at 50 inches water back pressure30 L/min at 15 inches water back pressure

Weight: 2.2 kg

Biostage Ideal for use with BioStage

Easy-to-use programmable timer for unattended sampling• Select sample time presets or customize timer from 1 to 999 minutes• Continuous run with manual shutoff• Intermittent sampling• Large, easy-to-use keypadVersatile sampling accessories• Optional mounting bracket for viable impactor• Wand for ductwork and other hard-to-reach areasEasy to use• Large keypad control• End-of-cycle visible and audible alarmsHigh-contrast digital display

PAGE 20

Unlike Similar Pumps, the QuickTake 30:

Maintains true constant flow • Can be calibrated with any primary standard calibrator for valid • calibration Does not require a special rotameter or hot-wire anemometer for • calibration Can be used with remote sampling wand and media that creates • back pressure such as wall cavity samplers

Do not operate or charge in hazardous locations. Not UL Listed for intrinsic safety. Protect sample pump from weather when in use outdoors.

Key FeaturesConstant flow from 10 to 30 L/min Ideal for use with:

Viable cascade impactors including SKC • BioStage®

Spore trap cassettes such as VersaTrap®•

Wall cavity mold samplers•

Microvacuum cassettes•

Other samplers that require flows to 30 L/min•

Long run times

AC charger/adapter for extended sampling•

Reliable rechargeable lithium-ion battery • pack

Compact and portable

Weighs only 2.2 kg•

Handle for easy portability•

QuickTake 30HIRE RATES:

DAY: $ 130.00

WEEK: $ 500.00

MONTH: $1500.00

Use Ø 90 mm Petri dishes (customer to source from

laboratory supplies)

400 holes (0.25mm dia) BioStage Impactor included




Key FeaturesSecured Sampling•

Electronic speed and flowrate auto • control

Battery load indicator and secured • cycle start (not allowed if battery power not sufficient to complete cycle)

Individually tested with its grid • installed, comes with a control certificate.

ISO 14698-1 microbial air sampling • compliant and validated.

Stainless steel sampling grid (steam • sterilisable)

Durable ABS housing•

Resistant to disinfectants and • peracetic acid

Use Ø 90 mm Petri dishes •

Determination of the microbiological quality of air is vital in a num-ber of sites such as areas where pharmaceuticals and medical devices are manufactured, operating theatres and other critical areas in hospitals and food processing facilities.Sampl’air microbial air samplers enable the microbial monitoring of the air through impacting microorganisms onto a standard Petri dish.

Sampl’air® is a high performance but affordable impaction based air sampler for the monitoring of airborne contaminants.

Its performance has been evaluated according to the ISO 14698-1 standard by the UK Health Protection Agency (HPA)

Specifications

Display Volume: Adjustable from 50 litres to 10m3

Delayed Start: Adjustable from 1 second to 60 minutes

Flowrate: 100 litres/min

Battery: Lasts for 4 hours = 25 cycles of 10 min (tested on more than 10,000 uninterrupted sampling cycles)

Display: Alphanumerical display of messages and parameters

PAGE 21

Biological Sampler Sampl’air - microbial air sampler

Sampl’AirHIRE RATES:

DAY: $ 70.00

WEEK: $265.00

MONTH: $650.00

Use Ø 90 mm Petri dishes (customer to source from

laboratory supplies)




In all QUESTemp° Thermal Environment Monitors a dry bulb sensor measures ambient temperature; a wet bulb sensor takes into account evaporative cooling, giving an indication of the effects of humidity on an individual; and a globe sensor provides an indication of the radiant heat exposure on an individual due to either direct light or hot objects in an environment.

Key Features QT 34

Key Features:

Real-Time Readings for Wet/Dry Bulb, • Globe,

WBGT Indoor/Outdoor, •

Relative Humidity and Heat Index•

Optional Remote Sensors for up to (3) • Simultaneously Monitored Areas

Plus Humidex/Heat Index Reading•

Data Logging •

Description:

The QUESTemp° 34 is a rugged, • easy to use, datalogging Thermal Environment Monitor.

The QUESTemp° 34 is the datalogging • version of the QT32 Thermal Environment Monitor.

Output recorded data directly to a serial • printer or download to QuestSuite™ Professional software, “The System Solution” for storage, retrieval, analysis, reporting, and charting of all your heat stress monitoring data.

SpecificationsMeasurement Range:

Temperature: -5 to 100°C Relative Humidity: 0 to 100% (Software: QSP II Compatible)

Available Measurements:

Celsius and Fahrenheit Scales, Wet Bulb, Dry Bulb, GlobeWBGT Indoor, WBGT Outdoor, Relative HumidityHeat Index, Humidex

Datalogging: DataLoggingTime History Profile for all Displayed Parameters Datalogging Intervals1, 2, 5, 10, 15, 30 or 60 Minutes

Measurement Parameters

Temperature Range -5 to 100C (23 to 212F)

Relative Humidity Range 0 to 100%

Sensors

Dry bulb sensor - 1000 Ohm platinum RTD Accuracy and ranges: +/-0.5 from 0° C to 120° C (+/-0.9° F from 32° F to 248° F)

Wet bulb sensor - 1000 Ohm platinum RTD Accuracy and ranges: +/-0.5 from 0° C to 120° C (+/-0.9° F from 32° F to 248° F)

Globe sensor - 1000 Ohm platinum RTD Accuracy and ranges: +/-0.5 from 0° C to 120° C (+/-0.9° F from 32° F to 248° F)

Relative humidity sensor Accuracy and ranges: +/-5% from 20 to 95% (non-condensing)

PAGE 22

Heat Stress Monitor QUESTemp Series Monitors

Datalogging

DataLogging Time History Profile for all Displayed Parameters Datalogging Intervals 1, 2, 5, 10, 15, 30 or 60 Minutes

Heat Stress MonitorQT34

HIRE RATES:

DAY: $150.00

WEEK: $245.00

MONTH: $700.00




CorTemp®

The CorTemp® core body temperature monitoring system, featuring the CorTemp™ ingestible temperature sensor, monitors, records and reports core body temperature accurately, wirelessly, and comfortably...even during periods of high physical activity.

How CorTemp® sensor works

The silicone coated sensor contains a micro battery, quartz crystal, communi-cation coil and circuit board, all encapsu-lated in medical grade epoxy.

Once ingested, the crystal sensor vibrates at a frequency relative to the body’s internal temperature, produces a magnetic flux and transmits a low-frequency signal harmlessly through the body.

The sensor passes through the body at the subject’s normal rate of motility which can vary anywhere from 24-36 hours.

Monitoring can be extended by administering another sensor after the initial pill has passed.

The CorTemp® sensor is accurate to ± 0.1°C and is FDA cleared and registered as a single use device.

CorTemp® Data Recorder

The data recorder detects the signal from the CorTemp™ sensor, then dis-plays and stores the data in memory.

The unit can be preprogrammed manually or via the CorTrack™ II software.

A clinician can easily transfer the recorder’s data directly to a PC platform where the data can be read into Excel® or similar spreadsheet program for analysis.

The data recorder will monitor up to 99 different CorTemp® sensors and can be either worn by a subject for continuous monitoring or can be used to take random, manual readings of multiple subjects in a field or laboratory setting.

Polar® Heart Rate is an optional feature available on the CorTemp™ data recorder.

Specifications for CorTemp® Ingestible Thermometer PillSize: L 0.88” (22.352mm) approx.

Dia. 0.42” (10.9mm) approx.

Temperature Range: 30 degrees C to 45 degrees C Accuracy: ± 0.1 degree C

Capsule Material: Dimethyl Polysilicoxane (silicone)Complies w/21CFR177.260 & 175.300 USFDA Regulations

Specifications for CorTemp® Data Recorder

Display: Two-line liquid crystal alpha-numeric 2x16 character

Operating Range: 0 degrees C to +50 degrees C

Data Storage: 25,000 data points

PAGE 23

CorTempTM - Core Body Temperature Monitor

CorTempCore Body Temperature

MonitorHIRE RATES:

DAY: $70.00

WEEK: $265.00

MONTH: $650.00

CorTemp® Ingestible Core Body Temperature

Sensor

Sensors are for single use and ordered separatelypart # HT150002

(please call for pricing)




For mercury spill detection and cleanup analysis

The J405 utilizes the industry-proven, inherently stable and reliable gold film sensor technology and simple, one-button operation. The ergonomically-designed handle, lighter exterior case and significantly lower detection capabilities (0.5 μg/m3) have reset the bar for portable and easy, low-level mercury detection instrumentation.

FeaturesThe larger display, on-board data logging, auto zeroing, and battery-powered sensor regeneration will simplify operation and maintenance in the field. Menu-driven pro-gramming, USB data communications and SCADA compatibility via 4-20 ma output further enhance data retrieval, storage and reporting.

Detection limit down to 0.5 μg/m3 • Meets EPA & ATSDR cleanup levels • Longer sensor life • Battery powered sensor regeneration • On-board data logging (20,000 data • points) (Upgraded Model) Auto time/date stamp (Upgraded • Model) USB data output (Upgraded Model) • SCADA interface capabilities via • 4-20ma

Specifications

Measurement ranges

Resolution: Detection Range:

0.013 μg/m30.5-999 μg/m3

Precision: Accuracy: Response Time:

15% RSD @ 1 μg/m3 ±10% @ 1 μg/m3 Sample Mode: 12 seconds, Survey Mode: 2 seconds

Flow Rate: Environmental Range: Interface:

750 cc/min or 0.75 l/min 0-45°C, non-condensing, non-explosive USB host, USB slave

Dimensions: Weight:

cm L x 16 cm W x 17 cm H 2.5 kg

Internal Battery Pack: Power Requirements:

Rechargeable nickel metal hydride (NiMH) 24V DC/Power Adapter

Certifications: TUV 61010, CE

Applications

Mercury Spill Response & • Cleanup

Mercury Exclusion Testing •

Facility Monitoring •

Source Surveys •

Hazardous Waste Sites •

Fluorescent Lamps Disposal & • Recycling

Worker Safety •

Landfill Monitoring •

Exhaust Duct Monitoring •

Plant Environment Monitoring: • light bulbs, mercury switches equipment

Fish (Heated) •

PAGE 24

Jerome®J405 - Mercury Vapour Analyser

Jerome J405HIRE RATES:

DAY: $200.00

WEEK: $600.00

MONTH: $1800.00




Environmental Sensors Company’s Z-300XP Formaldehyde Meter is a desktop instrument that measures formaldehyde concentration in air with a range of 0-30 ppm and a resolution of 0.01 ppm. The high resolution and accuracy of this model make it ideal for of indoor air quality testing, air monitoring while performing operations using formaldehyde, or air monitoring in industrial environments. With the data logging feature, the meter stores all of the exposure points for up to 12 logs (a log is created in the instrument’s internal memory each time it is used). Each log contains: date, time, number of exposure points, the interval between each point, and the actual exposure points.

FeaturesHigh Resolution (0.01) • Easy to Use • Direct Reading • Internal Pump • Rechargable Battery • High Accuracy •

Specifications

Cross-Sensitivity Gases

Interferences

Measurement ranges

Sensor Technology Electrochemical Sensor w/Chemical Filter

Nominal Range: 0-30 PPM

Resolution: 0.01 ppm

Measurement Time: 3 min. normal conditions

Repeatability 0.015 PPM

Zero Drift: <0.002 PPM/min

Operating Temperature 0-400 C

Pressure Range Atm 10%

Relative Humidity 15-90%, non-condensing

PAGE 25

Formaldehyde Monitor Z300XP

Acetone Methylethyl Ketone Diethyl KetoneAcetaldehyde Acetic Acid EthyleneMethanol Ethanol I-propanolCarbon Monoxide

Care needs to be exercised about using this instrument in the presence of large concentrations of interfering gases. Contact the manufacturer if difficulties are suspected with other gases, or with other usage problems. In addition variations of the baseline, resulting from varying concentrations of compounds other than aldehydes or ketones, during the course of the measurement (about three minutes), can impact the reading.

Z300 XPFormaldehyde Monitor

HIRE RATES:

DAY: $ 90.00

WEEK: $350.00

MONTH: $990.00




Quantifit OHD Respirator Face Fit Testing

Technology

During a fit test, the respirator inlets are capped with test adapters, and the inhalation valves are removed from the mask. With the test worker holding his or her breath for no more than ten seconds, the Quantifit then establishes and maintains a slight vacuum,or controlled negativepressure, inside the mask. Since the respirator inlets are sealed, all sources of leakage into the mask are through the face-to-facepiece seal. The volume of air drawn out of the mask by the Quantifit during this short period of time is equal to the leak rate into the mask through the face-to-facepiece seal.It’s that simple….

Specifications

Measurement ranges

Dymanic Range: Leak Test Measurement: 2 – 5000 cc/minResolution: 0.1 cc/minFit Factor Computation: 6 – 53,000Resolution: 1

Pressure Sensor Parameters

Pressure Range: 0-20 inches H 2OResolution: 0.01 inch H 2OAccuracy: ± 0.25% FSOver-Pressure Limit: 60 inches H2OTemperature compensation: 15 – 30 Celcius

Instrument Accuracy: Challenge Pressure: ± 5 %Leak Rate Measurement: ±3% or ±3 cc/min, whichever is greater

Operating System: Windows 2000, XP or Vista

Adapters Required:3M Company• Bacou/Dalloz• Drager• Glendale• International Safety Inst.• Interspiro• Kemira• Mine Safety Appliances• Moldex• North Safety• Protech• Scott• Sperian (formerly Survivair)• US Safety•

Call for information on additional respirator manufacturers & models.

PAGE 26

Controlled Negative Pressure technology was accepted by OSHA in 1998, and has quickly been adopted by industry to be the quickest and most accurate way to perform respirator fit testing— the gold standard in respirator fit testing.

QuantifitHIRE RATES:

DAY: $100.00

WEEK: $500.00

MONTH: $990.00




Simultaneous display of Foot Candles or Lux

Enhance accuracy by selecting one of four lighting types plus PC interface. Microprocessor assures maximum accuracy plus special functions. Super large 1.4” (1999 count) LCD display. ±4% accuracy is enhanced by selecting lighting type (Tungsten/Daylight, Fluorescent, Sodium, Mercury)

Specifications

Circuit: Custom one-chip LSI microprocessor circuitDisplay: 3-1/2 digit (2000 count) LCD display with contrast adjustmentMeasurement ranges : LUX: 0 to 50,000 LUX (3 range); Fc: 0 to 5000 Fc (3 range); Relative mode: 0 to 1999%Data Hold: Freezes displayed readingLighting Types: Sodium, Daylight/Tungsten, Fluorescent and MercurySensor Structure: Cosine/color corrected photo-diode meets C.I.E.Memory Store/Recall: Records/Recalls Max/Min/Avg readingsSample rate: 0.4 seconds (approx.) per readingZero Adjust: Push-button procedureAuto Power Off: After approx. 10 minutesData Output: RS-232 PC serial interface (optional software/cable PN 407001)Operating conditions: 0 °C to 50 °C; <80% RHPower Supply: 9V batteryPower consumption: Approx. 5 mA DC. (approx. 200 hr battery life)Weight: 320 gDimensions: Instrument: 180 x 72 x 32 mm Sensor: 85 x 55 x 17.5 mm

Key FeaturesMeasurement Range Display Resolution Accuracy•

LUX• 2,000 LUX 0-1,999 LUX 1 LUX ± (4% + 2 digits) 20,000 LUX 1,800-19,990 LUX 10 LUX of full scale 50,000 LUX 18,000-50,000 LUX 100 LUX

Relative mode• 0-1999% 1%

Note: The accuracy specification above applies to calibration performed using a precision •

standard incandescent tungsten light source of 2856OK with meter on the tungsten setting.

PAGE 27

Light Meters Heavy Duty Light Meter

Heavy Duty Light MeterHIRE RATES:

DAY: $ 50.00

WEEK: $105.00

MONTH: $195.00




The DUSTTRAK Aerosol Monitor measures aerosols in a wide variety of environments, from offices and industrial workplaces to outdoor environmental and construction sites. TSI’s DUSTTRAK provides reliable exposure assessment by measuring particle concentrations corresponding to PM10, PM2.5, PM1.0 or respirable size fractions.

Key FeaturesThe DUSTTRAK is a portable, battery-• operated laser photometer which gives you a real-time digital readout with the added benefits of a built-in data logger. Suitable for clean office settings as well as harsh industrial workplaces and outdoor applications, the DUSTTRAK detects potential problems with airborne contaminants such as dust, smokes, fumes and mists.

The DUSTTRAK is easy to use, too. • You can perform quick spot checks or you can program the advanced logging modes for long-term sampling. You can program the start/stop times, recording intervals and other parameters. You can even set up the instrument for continuous unattended operation.

The DUSTTRAK’s new continuous • analog output and adjustable alarm output allow remote access to real-time particle concentration data. Applications include site perimeter monitoring, ambient monitoring, process area monitoring and other remote uses. The alarm output with user-defined setpoint alerts you when upset or changing conditions occur.

Optional Accessory8535 Environmental Enclosure

Specifications 8530 model

Range: 0.001 to 100 mg/m3 (Calibrated to ISO 12103-1, A1 test dust)

Resolution: ±0.1% of reading or ±0.001 mg/m3, whichever is greaterZero Stability ±0.001 mg/m3 over 24

Particle Size Range: 0.1 to approximately 10 micrometers

Datalogging: 31,000 data points (21 days of logging once/minute)

Logging Interval: Adjustable from 1 second to 1 hour

DustTrak accessories: Auxiliary Analog and Alarm Outputs,• Carrying Case, • Alkaline Batteries, • TRAKPRO• TM Data Analysis Software,Filter, Computer Cable, • 25-pin to 9-pin Adapter, • Operation Service Manual, • Calibration Certificate, • 10 mm Nylon Dorr-Oliver Cyclone, • Inlet Conditioning Kit 1.0 • 2.5 μm, Sampling Extension Tube• Service Tools•

This feature allows you to program a • switch closure at a concentration value of your choosing.

The DUSTTRAK provides a real-• time measurement based on 90° light scattering. A pump draws the sample aerosol through an optics chamber where it is measured. A sheath air system isolates the aerosol in the chamber to keep the optics clean for improved reliability and low maintenance.

PAGE 28

Real Time Dust TSI DustTrak Portable Dust Monitor

DustTrakHIRE RATES:

DAY: $ 70.00

WEEK: $295.00

MONTH: $650.00

Environmental EnclosureHIRE RATES:

DAY: $50.00

WEEK: $150.00

MONTH: $200.00




Providing a comfortable, safe and healthy indoor environment is an increasingly important concern. Good air quality increases concentration and productivity. It can also reduce lost days due to absence. TSI’s Q-TRAK IAQ Monitor provides quick, accurate information to assess key IAQ parameters.

Accurate ResultsThe Q-TRAK monitor’s state-of-the-art sensors and large, easy to-read graphics allow real-time, simultaneous display of temperature, relative humidity, CO2 and CO. The user can even review previously stored data without interrupting a test in progress.

Key Features

Measures dew point, wet bulb and • percent outside air

Displays and data logs up to 5 • measurements simultaneously

One instrument with multiple plug-in • probe options

User-selectable logging intervals and • start/stop times

Store up to 38.9 days of data collected • at one-minute log intervals

TRAKPRO™ software provided • for data logging, analysis and Documenting results

Perform single-point tests for quick • building surveys

Specifications

CO2 Sensor Type Dual-wavelength NDIR (non-dispersive infrared)Range 0 to 5,000 ppmAccuracy1 ±3.0% of reading or ±50 ppm, whichever is greaterResolution 1 ppm Response Time: 20 seconds

Temperature: Sensor Type: Thermistor Range: 0 to 60°CAccuracy: 0 to 60°CResolution: 0.1°CResponse Time: 30 seconds (90% of final value, air velocity at 2 m/s)

Relative Humidity: Sensor Type: Thin-film capacitiveRange 5 to 95% RHAccuracy2 ±3% RHResolution 0.1% RHResponse Time 20 secondsResolution 0.1% RHResponse Time 20 seconds (for 63% of final value)

% Outside Air: Range 0 to 100% Resolution 0.1%

CO Sensor: Sensor Type Electro-chemicalRange 0 to 500 ppmAccuracy ±3% of reading or 3 ppm, whichever is greaterResolution 0.1 ppmResponse Time <60 seconds to 90% step change

Easy to Use

The Q-TRAK features a menu-driven user interface for easy operation.

On-screen prompts and step-by-step instructions guide the user through operation and field calibration.

The Q-TRAK also features an ergonomic, overmolded case design and a keypad lockout to prevent tampering during unattended uses.

PAGE 29

Q-TRAK Indoor IAQ - CO2 CO Temperature and Humidity

Q-TRAKHIRE RATES:

DAY: $ 65.00

WEEK: $250.00

MONTH: $575.00




P-TRAK UltrafineParticleCounterThe TSI’s P-TRAK® Ultrafine Particle Counter (UPC) is a totally new approach to eliminating IAQ problems. This portable instrument detects and counts ultrafine or nanoparticles (smaller than 1 micrometer in aerodynamic diameter) that often accompany or signal the presence of a pollutant that is the root cause of complaints. It is now being used to track down some of the most difficult IAQ problems imaginable.

Key Features

Real-time ultrafine particle counter •

Battery operated and portable•

Easy to use •

Data log information •

Specifications

Concentration Range: 0 to 5 × 105 particles/cm3

Particle Size Range: 0.02 to greater than 1 micrometer

Flow Rate: Sample 100 cm3/minTotal 700 cm3/min (nominal)

Power Requirement: Battery type 6 AA alkalineBattery life 6 hrs at 21°C

Memory: Single points 470Data logging 1,000 hours at one-minute intervals.

Temperature Range: Operation: 0 to 38°C Storage: -40 to 70°C

Detection

The P-TRAK UPC locates obvious pollutant sources such as boilers, furnaces, vehicles and also detects the not-so-obvious sources such as photocopy machines and printers.

Use this instrument to detect the migration of toxic exhaust gases, malfunctioning office equipment, pinhole gasket leaks in boilers and a wide variety of other problems.

Accessories Included:

Carrying case•

Calibration certificate •

Telescoping sample probe •

Alcohol fill capsule with storage cap •

Alcohol cartridge •

30 ml bottles reagent grade • Isopropyl Alcohol (16)

Zero Filters (2) •

TRAKPRO™ Data Analysis • Software

Operation and service manual •

AA alkaline batteries (6)•

PAGE 30

P-TRAKHIRE RATES:

DAY: $160.00

WEEK: $375.00

MONTH: $750.00




The VelociCalc 9555-P Multi-Function Ventilation Meter is a portable, hand held ventilation test instrument. This instrument is designed to work with a wide range of plug-in probes.

Key Features

The probes allow users to • make various measurements by simply plugging in a different probe that has the features and functions best suited for a particular application.

With the optional probes, • measurements can include air velocity, temperature, humidity, pressure, CO and CO2. Calculations include air flow, heat flow, turbulence, wet bulb and dew point temperature.

Specifications: Thermoanemometer Straight Probe, 964

Range: 0 to 9,999 ft/min (0 to 50 m/s) 14 to 140°F (-10 to 60°C) 0 to 95% RH

Accuracy: ±3% of reading or ±3 ft/min (±0.015 m/s), whichever is greater ±0.5°F (±0.3°C) ±3% RH

Resolution: 1 ft/min (0.01 m/s) 0.1°F (0.1°C) 0.1% RH

Probe Dimensions: Length 40 in. (101.6 cm) Tip dia. 0.28 in. (7.0 mm) Base dia. 0.51 in. (13.0 mm)

Applications

HVAC commissioning and trouble-• shooting

Clean room certification •

Testing and balancing •

Ventilation evaluations •

Thermal comfort studies •

IAQ investigations •

Process air flow testing •

Included items: Instrument (964 Probe, see specs) Hard carrying case (2) 1.2-m rubber tubes and static pressure tip 4 alkaline batteries USB cable and downloading software Operation and service manuals Calibration certificate

PAGE 31

VelociCalc IAQ Air Velocity Meter-Multifunction Ventilation meter

VelociCalcHIRE RATES:

DAY: $ 75.00

WEEK: $375.00

MONTH: $750.00




Air Sampling Pumps

SuperiorflowcontrolsystemsSKC superior flow control systems • provide accurate air volumes and smooth, pulseless flow, even in dusty environments. Programmable models availableProgrammable sample pumps can • be preset to run unattended. Some models are programmable from a PC for multiple run schedules. WideflowrangesSKC sample pumps are available in a • variety of flows ranging from 5 ml/min to 250 L/min to cover most sampling applications. Rugged and compactSKC rugged, compact pumps are • designed to withstand extremes of industrial environments and to provide portability to users.

Reliable Performance

Consistent quality and reliability are • the reasons professionals choose SKC sample pumps time and again.

SKC AIR SAMPLING PUMPSThesepressurecompensating,constantflowpumpsare

used to draw a known volume of air through a wide variety ofsamplingmediasuchassampletubes,filtersand

impingers.

PAGE 32

Air Sampling Pumps from SKC

AIR SAMPLING PUMPS HIRE RATES:

No: DAY WEEK MONTH $ $ $ 1 50 120 245 2 80 220 460 3 110 325 700 4 130 400 920 5 150 450 1100 6 170 500 1300 7 190 550 1500 8 210 600 1650 9 230 650 1750 10 250 700 1850 11 270 750 1950 12 290 800 2050 13 310 850 2150 14 330 900 2250 15 350 950 2350 16 370 1000 2450 17 390 1050 2550 18 410 1100 2650 19 430 1150 2750 20 450 1200 2850




AirChek 52 Operating Range: 5 to 3000 ml/min• (low flow 5 to 500 ml/min requires adjustable low flow holder and CPC)LCD time display: 3 digit display of run time in minutes• Detachable “quick change” battery pack• High and Low flow capabilities• Fault shutdown with time retention•

PCXR4: Operating Range: 5 to 5000 ml/min• (low flow 5 to 500 ml/min requires adjustable low flow holder)Battery: 8 hrs min at 4000 ml/min and 20 in water back pressure (dependent on media • used)Multiple tube sampling capability, compensation with high back pressure• Sampling Pause allows user to temporarily halt sampling without loss of timing data. • Restart does not require resetting time.Timer Display Range: 1 to 9999 minutes (6.8 days). •

Pocket Pump:

Operating Range: 20 to 225 ml/min•Constant Flow Compensation: 20 to 225 ml/min up to 20 inches water back pressure• Flow fault: if flow is restricted, pump stops and holds historical data, auto-restart attempted • every 5 minutes.Run time: 13 hours at 200 ml/min, 10 inches water back pressure; indefinite when connected to • chargerBuilt-in rechargeable NiMH battery pack•

AirChek XR5000 Operating range: 5 to 5000 ml/min •(5 to 500 ml/min with requires adjustable low flow holder and CPC)Constant flow compensation: 5000 ml/min at 10 (inches water back pressure) • Easy to use three button keypad• Set and go timer for time and delayed runs to 9999 min• Large LCD displays elapsed time and accumulated run time• Flow fault indicator and auto-restart from flow fault•

Specifications

PAGE 33

Air Sampling Pumps from SKC




Defender DEFENDER Primary Standard CalibratorBuilt on next-generation DryCal® technology, the new Defender primary standard pump calibrators integrate all the advantages of the popular DC-Lite calibrator with exciting new features based on 10 years of product feedback and ongoing research. Defender calibrators were designed exclusively for the occupational health and safety industry.

Key FeaturesMenu-driven operation•

Large illuminated graphical display with • zoom feature

Sleek new molded case design with • rubber

Handgrips — slim enough to fit in a • briefcase

Integrated serial PC interface and • software for data transfer to PC

Interior shock absorbers for field use•

Improved internal valve design for • greater reliability

Flow ranges: 50 ml to 5 L•

Volumetric accuracy is 1% of reading•

Specifications

Flow Range 50 ml to 5L

Volumetric Accuracy ± 1% of reading

Time per measurement: 1 to 15 seconds (approximate)

Measurement Units Select cc/min, ml/min, L/min, or cf/min

Temperature & Pressure Sensors

Pressure: 3.5Hg (typical), 7.0mm (max) Temperature: 33.4F (0.8C) (typical), 1.3v C (max)

Includes:

100-240 V charger•

Optimizer 110 Software, •

1 metre serial cable. •

Software requires Windows 2000 (sp • 3), XP (sp 2), or Vista and available COM port

Features

An ideal three-in-one calibrator, the Defender 510 provides an enhanced audit trail — volumetric flow, temperature, and pressure — without the need for additional instrumentation.

PAGE 34

DefenderHIRE RATES:

DAY: $ 50.00

WEEK: $200.00

MONTH: $500.00




Sampling Accessories SKC, RAE Systems, Larson Davis & TSI

All sampling accessories are available for purchase. We can supply a full range of SKC, RAE Systems, Larson Davis and TSI sampling accessories.

Please contact us to complete your sampling requirements.

PAGE 35

part #: 225-1346 Tygon tubing, 1/4” ID X 3/8” OD

part #: 225-13-2 PVC Luer Adapt-ers. Luer taper connects to 1/4” tubing

part 224-29A for 6-mm OD tubes

part 224-29B for 8 mm OD tubes

part 224-26-CPC

low flow constant pressure controller

part 224-26-01

Single Adjustable Low Flow Tube Holder

part 500-100

UMEx100 Passive Sampler for Formaldehyde

part 575-001

Passive Sampler for Organic vapours

part 225-317 Diesel Particulate Matter (DPM) cassette with impactor and filters

coated filtersRAE Systems transport cases and accessories

SKC pump carry bags

RAE Systems detection tubes and Separation Tubes

part # 225-326 MCE filter (with black grid) 0.8um, 25mm (for asbestos sampling)

232-01 Sample Bags

1 Liter Sample Bag (7” X 7”) with single polypropylene septum fitting.

calibration and bump test gas

Water Trap filters for RAE Systems pumped gas detectors

SKC 225-2404

surface Lead Test Kits

Sorbent Tubes

25mm MCE filters

IOM sampler with colar clip and cover SKC part # 225-70A and 225-72A




703P Noise Dosimeters from Larson Davis

Larson Davis Noise Dosimeters 703 PlusSmall, robust and easy to use, these units are Type II and conform with all the relevant Australian Standards.703+ - Fully featured logging dosimeter with remote response capability. Complete report generation and setup using Blaze software. Can be operated and (excluding LCD and keypad for maximum security) interrogated by the 706RC.

AccessoriesMPR001: Detachable prepolarized • electret microphoneUser Manual• Two AA batteries• Form-fitting pouch with belt clip• Microphone Clip• WS002: Windscreen• DVX008: PC external infrared data • acquisition (IrDA) serial adaptorCAL150: Calibrator with 94 or 114 dB • output @ 1 kHz Blaze™ analysis software (CD and • accessible from website)

Can be operated and interrogated by the 706RC

Specifications

Blaze SoftwareFor creating first-class reports and identifying at-risk population groups, Spark’s companion Blaze™ Software is unbeatable - concise compliance reports and a clearly understood colour graph of work-shift exposure are combined on one page.

Measurement Range: 40 to 142dB (RMS): 80 to 146dB (peak) typical

Maximum Peak Level: 146 dB SPLFrequency Weighting: Am Cm Unweighted (peak)

Clock/Calendar Month, day, year, hh:mm:ss, 98 events timers

Memory: 1MB, non-volatile

Detectors: Slow, fast and peak

PAGE 36

Type II Noise Dosimeters HIRE RATES:

DAY: $ 50.00

WEEK: $195.00

MONTH: $495.00




Key Features706RC - Fully featured dosimeter • with LCD, keypad and remote control capability. Offers 4 MB memory capacity.

Full report generation and setup • using Blaze software. Gives surrogate display for 703+ or 706.

The remote control function allows • setup and control of other remote response Sparks.

Interrogates and stores data from • multiple dosimeters.

Larson Davis Noise Dosimeters 706RC

With multiple simultaneous dose calculations, ceiling and peak level displays, as well as continuous data logging, the 706 computes compliance results for any standard, present or proposed - and with quick IR download using Blaze™ software, a selection of concise, easily understood reports and color graphs are created for your review.

Accessories:

MPR001: Detachable prepolarized • electret microphoneUser Manual• Two AA batteries• Form-fitting pouch with belt clip• Microphone Clip• WS002: Windscreen • DVX008: PC external infrared data • acquisition (IrDA) serial adaptorCAL150: Calibrator with 94 or 114 • dB output @ 1 kHzBlaze™ analysis software • (CD and accessible from website)

Specifications (706 RC)

Measurement Range: 40 to 142dB (RMS): 80 to 146dB (peak) typical

Maximum Peak Level: 146 dB SPLFrequency Weighting: Am Cm Unweighted (peak)

Clock/Calendar Month, day, year, hh:mm:ss, 98 events timers

Memory: 4MB, non-volatile


PAGE 37

706RC Noise Dosimeters from Larson Davis

Type II Noise Dosimeters HIRE RATES:

DAY: $ 50.00

WEEK: $195.00

MONTH: $495.00




Larson Davis SLM

The System 824 and LXT 1 combine sound level meter and real-time analyzer capabilities in one small, rugged package. The instrument covers many important measuring functions in one user-friendly, hand-held design.

Key Features 824ANSI/IEC Type 1 Sound Level Meter •

Multiple instrument functions: Simple • SLM, combination SLM/RTA, logging SLM, high speed 1/3 octave real-time or FFT analyzer

Real-time filters: 1/1 Octave Band (16Hz • to 16kHz) and 1/3 Octave Band (12.5Hz to 20kHz)

400-line FFT: (1 Hz to 20 kHz)•

Building Acoustics: RT60, NCB and RC • calculations

Microphone: extendable up to 500’ •

Memory: 2 megabytes of efficient data • memory

Windows based software: for setup, • control and high speed data exchange

Light-weight: easy to hold, easy to • use

Power source: 3 AA alkaline batteries •

AC/DC output •

Serial Interface •

1/1, 1/3 true digital octave analysis • capabilities

Specifications

Key Features LXT1Simple Operation — with just one • hand!

20 Hours runtime on 4 AA Alkaline • Batteries

USB 2.0 Interface•

Large, Bright, High-Contrast LCD • Screen

Extremely Rugged — Compact and • Lightweight

Available in Class 1 or Class 2 • Versions

Multiple Measurements from one • Sampling Session:

Real-time dB display•

Leq (Average w/ 3 dB Exchange rate)•

TWA/Average dB (Other than 3dB • exchange rate)

Lmax/Lpeak•

Mult ip le Dose and Exposure • calculations

Time stamping of relevant metrics • 1/1, 1/3 true digital octave analysis capabilities

824 LXT1Time Weighting:

Slow, Fast, Impulse, TWA, peak (in parallel with all frequency weightings)

Time Weighting:

Slow, Fast, Impulse, TWA, peak (peak has independently selectable frequency weighting)

Frequency Weighting:

A, C, Flat (in parallel with all time weight-ings)

Frequency Weighting:

A, C, & Z, Octave, Fractional Octave (with OBA options)

Peak Range: Peak Level:

>65 dB 160 dB (2540 mic)


> 140 dB 143 dB

Octave Band Frequencies:

1/3 octave: 12.5 Hz to 20 kHz 1/1 octave: 16.0 Hz to 16 kHz

Octave Band requencies:

1/3 octave 1/1 octave

Detectors: Slow, fast and peak Detectors: Slow, fast and peak

PAGE 38

Sound Level Meters Type 1 System 824 SLM and LTX1

Type I Sound Level MetersHIRE RATES:

DAY: $ 90.00

WEEK: $350.00

MONTH: $990.00




Key Features

Simple Operation — with just one • hand!20 Hours runtime on 4 AA Alkaline • BatteriesUSB 2.0 Interface• Large, Bright, High-Contrast LCD • ScreenExtremely Rugged — Compact and • LightweightType 1 also available•

Specifications

Measurements:

SPL, Leq, TWA(2), Lmin, Lmax, Lpeak, Lpeak(max) Dose(2), Proj. Dose (2), Lep,d, E, E8, E40, SEA, Ln (6), Event Counters (3); (2 RMS, 1 Peak)

Multiple Measurements from one Sampling Session:

Real-time dB display• Leq (Average w/ 3 dB Exchange • rate)TWA/Average dB (Other than 3dB • exchange rate)Lmax• Lpeak• Multiple Dose and Exposure • calculationsTime stamping of relevant metrics•

Time Weighting: Slow, Fast, Impulse, TWA, peak (peak has independently selectable frequency weighting)

Frequency Weighting: A, C, & Z, Octave, Fractional Octave (with OBA options)


> 140 dB SPL 143 dB

Octave Band Frequencies:

1/3 octave1/1 octave


PAGE 39

Larson Davis SLMSoundTrack LxT®: The SoundTrack LxT® SLM represents a significant advance in Technology, Performance, Reliability and Ease-of-Use. This revolutionary design ensures that gathering, analyzing and presenting detailed environmental noise data, in accordance with Acoustical Standards, can be achieved by Safety and Health personnel rather than professional Acoustics Engineers

Sound Level Meters Type 2 Type 2 Sound Level Meter

Type 2 Sound Level MetersHIRE RATES:

DAY: $ 60.00

WEEK: $185.00

MONTH: $405.00




Vibration: HVM Larson Davis: Human Vibration Monitor

The Human Vibration Monitor 100 is a hand-held instrument for measuring human exposure to vibration, performing relevant calculations and providing overall metrics on its LCD display. Detailed vibration levels are easily stored in its built-in data logger, which can hold up to 100 separate time-history test files including all required metrics. This information can then be downloaded to a PC for analysis and archiving.

Key Features

Frequency weightings and • measurements for Hand-Arm and Whole Body Vibration

Conforms to ISO Standards • 2631 and 5349

Simultaneous 3-channel • Measurements: X, Y and Z axes, plus Sum (S)

Lightweight and Portable • - operates from two AA batteries or AC power supply

Records up to 200 hours of • measurement time history

Programmable AC or DC • Signal output

USB and Serial Interface to • PC (115.2 kBaud)

Specifications

Measurements:

Measuring all three axes of vibration simultaneously greatly simplifies the setup of a test and enhances the repeatability and correlation of the vibration data.

From the three channels of measured data, the HVM 100 automatically calculates the important vector sum information and presents it as a fourth set of data values.

For compliance with the latest measurement standards, the HVM100 employs digital filters for each channel that can be enabled as needed, and will never be obsolete - should standards change, the filters can upgraded - electronically!

Applications:

Product Compliance Testing• Assess Risk of Injury • Whole Body Vibration• Hand Tool Vibration• Vibration Severity Measurement• Hand-arm Vibration• Worker Exposures• Industrial Hygiene•

Units: m/s2, cm/s2, ft/s2, in/s2, g, dB

Metrics for each mode: Vibration:

Hand-arm: Whole-body:

Arms, Amin, Amax, Aeq, Amp, Peak Arms, Amin, Amax, Aeq, Amp, Peak, A(1), A(2), A(4), A(8), A(8) AET, EP Arms, Amin, Amax, Aeq, Aeq(k), Amp, Peak, CFmp, CF, VDV

Frequency weighting: Vibration:

Hand-arm: Whole-Body:

Ws (Severity), Fa (0.4 Hz to 100 Hz), Fb (0.4 Hz to 1250 Hz), Fc (6.3 Hz to 1250 Hz)WhWb, Wc, Wd, We, Wg, Wj, Wk, Wm

Memory: 100 measurements, 1 min to 99 hr

Time History: 120 samples of Arms & PEAK at a period of 1, 2, 5, 10, 20, 30, 60 sec

PAGE 40

Human Vibration MonitorHIRE RATES:

DAY: $ 90.00

WEEK: $350.00

MONTH: $990.00

HVM100ALL-41 includes:HVM100, HVM100-ALL, • 10 mV/g accelerometer with filter (SEN041F), • seatpad accelerometer (SEN027), • handle adaptor (ADP081), • cables (CBL006,DVX008A, CBL158), • case (CCS028), • Blaze® software.•

Other methods such as colorimetric tubes provide only a snapshot of the concentration and no real-time alarm, unless the sample happens to be taken at the exact time of the peak occurrence. RAE Systems PID monitors provide ongoing detection and instantaneous alarms to indicate when exposure limits have been exceeded for a wide range of chemicals.

When limits are exceeded, the datalogging feature of RAE Systems monitors allows the individual to store, recall, and “see” exactly when the levels were a problem, whereas a tube cannot indicate when a level was exceeded or whether it happened all at one time or over the course of a worker’s shift.

Data from RAE Systems monitors can be instantly accessed from a personal computer. An individual can be asked what happened to create a situation in

which exposure limits were exceeded while the individual can still recollect what happened. The answer could be as simple as cleaning with solvents or the failure of a ventilator. Therefore, with fast-acting PIDs, instantaneous alarms and datalogging, RAE Systems monitors allow safety action to be taken immediately. Other methods, such as activated charcoal sampling, can take days or weeks to get results back from a lab.

Measuring a “Witches’ Brew” of Chemicals for a Particular ToxicPIDs can be used to measure a highly toxic component of a complex mixture if its percentage in the mixture is known. For example, if a gasoline contains 1% benzene and the broadband PID reading for the entire gasoline mixture is below 50 ppm, then benzene is below its Permissible Exposure Limit (PEL) of 0.5 ppm.

What Does a PID Detect?A PID measures all compounds whose ionization energy (IE) is less than the energy of the lamp photons (see figure at right). RAE Systems offers 9.8, 10.6, and 11.7 eV lamps.

Broadband Toxic Compound Monitoring in the WorkplaceUntil recently, the only low-cost way to get a “Go” or “No Go” reading for toxic VOCs was through the use of broadband toxic sensor such as MOS (metal oxide semiconductor) or lower explosive limit (LEL) sensors. These are not sensitive enough to provide accurate warnings of most toxic vapors until the permissible exposure levels are greatly exceeded. For example, benzene’s permissible exposure limit is 1 ppm, due to its highly carcinogenic nature. PIDs can easily measure down to 0.1 ppm benzene, while MOS and LEL sensors are best used above 100 ppm and cannot detect these low levels.

Advantages of a PIDVery sensitive – low ppm readings • measured with confidence.

Instantaneous display, updated every • second, for real-time monitoring of toxic chemicals.

Threshold monitoring–visible and • audible alarms in real time for STEL (short-term exposure limit), TWA (time-weighted average), and Peak. Alarm signals vary for each condition.

Datalog for compliance and work shift • trend analysis.

Fast, simple calibration with isobutylene. • A large table of correction factors is available, alleviating the need to purchase many calibration gases.

Protection Vs. DetectionPIDs have traditionally been considered “detection” instruments, particularly well suited for use by first responders and entry teams to determine the extent of a spill or airborne emission. RAE Systems’ PIDs are “protection” monitors, quantifying chemical concentrations and alerting workers to hazardous conditions. Other applications include PID ppm and ppb monitoring for combustible gases such as jet fuel, gasoline, and solvents.

What is a Photoionization Detector (PID)?

PAGE 41

A PID, short for photoionization detector, is a broadband sensor that responds to a large variety of organic and some inorganic compounds. The general class of compounds suitable for detection is volatile organic compounds (VOCs) or hydrocarbons (HC). Because of their sensitivity and fast response at extremely low concentrations of compounds (parts per billion), PIDs protect workers not only from gases immediately dangerous to life, but also from toxic vapors that have long-term health effects.

Continuous Monitoring Alarms When Permissible Exposure Levels are Exceeded

How Does a PID Work?

Definition of TWA, STEL and Ceiling

Typically, the TWA is the lowest value, STEL is somewhat higher and the Ceiling is the highest. Ceiling is the concentration that should never be exceeded, even for one instant. The STEL is a running average concentration over the immediately previous 15-minute period.

The instantaneous concentrations may exceed the STEL value as long as they never exceed the Ceiling, and the 15-minute running average never exceeds the STEL limit. If the STEL alarm level is reached, the worker must be removed from STEL-level exposure for at least one hour.

Workers can be exposed to a maximum of four STEL periods per 8-hour shift, with at least one hour between exposure periods.

For detailed information about calculating STEL, TWA, Min, Max, and Average Values for ToxiRAE PID, refer to RAE Systems Technical Note TN-119.

Atmospheric Hazards in Confined Spaces

Atmospheric hazards in a confined space are those that expose entrants to a risk such as death, entrapment, injury, or acute illness from one or more of the following causes:

Oxygen:• An atmospheric oxygen concentration below 19.5% (oxygen deficiency), or above 23.5% (oxygen enrichment)Combustible gases•Toxic gases•

Using PIDs for 10% of LEL Decisions

One of the many requirements for enter ing conf ined spaces is the measurement of confined spaces for flammable gases. Prior to entry of a confined space, the level of flammable gases must be below 10% of LEL (lower explosive limit). The most common sensor used for measuring LEL is the Wheatstone bridge/catalytic bead/pellistor sensor (“Wheatstone bridge”).

LEL Sensor Limitations:• “Heavier” hydrocarbon vapors have

difficulty diffusing into the LEL sensor and reduce its output

• Common chemicals may poison LEL sensors

PIDs: Alternatives for 10% of LELPhotoionization detectors (PIDs) are sensitive hydrocarbon sensors originally designed to measure ppm levels of hydrocarbons for the environmental industry. PIDs are uniquely suited for measuring hydrocarbon mixtures. Because PIDs use an optical technology, they are resistant to the poisons that can ruin Wheatstone bridge sensors.

Why Monitor Benzene?

Benzene is a known human carcinogen that is present in automotive gasoline and other fuels in concentrations typically 0.2 to 3%. Its regulated exposure limit is so low (proposed 8-hour day TWA of 0.5 ppm) that its concentration alone usually defines the toxicity of the fuel vapors as a whole. Thus, it is necessary to measure low concentrations of benzene (often ≤1ppmv) in the presence of much higher concentrations (tens to hundreds of ppmv total) of the hundreds of aromatic and aliphatic compounds that make up gasoline.

SpecificBenzeneMeasurementsRAE-Sep™ benzene tubes scrub nearly all components out of gasoline vapors except benzene. This is accomplished through a proprietary absorption medium in the tubes. Further selectivity is afforded by using a 9.8 eV lamp, which responds strongly to aromatics but weakly to many hydrocarbons.

Appl icat ions inc lude tank entr y pre-screening during refinery and plant maintenance, hazardous material response, marine spill response and refinery downstream monitoring.

Helpful Information ...

What are Some Common VOC’s?

VOCs are the chemical compounds that keep industry going, and include:

• Fuels

• Oils, degreasers, heat transfer fluids

• Solvents, paints

• Plastics, resins and their precursors

VOCs are found throughout industry, from the obvious applications in the petrochemical industry to not-so-obvious applications such as sausage manufacturing.

Flame Ionization Detectors (FIDs)

Flame Ionization Detectors (FIDs) respond to a broad range of organic compounds but are non-selective.

While their linearity is excellent, their use is limited by their large size and weight, including the need to carry a hydrogen cylinder. FIDs are relatively expensive and maintenance-intensive, and this limits their use in most industries. PIDs and FIDs are often referred to generically as organic vapor analyzers, or OVAs. Many people want to know the difference between the two techniques, and the difference is really one of preference. The difference between an FID and a PID is like the difference between a meterstick and a yardstick. They effectively measure the same things, but because PIDs are smaller, easier to use, and significantly less expensive, their usefulness in industry is potentially greater than FIDs.

PAGE 42

Conversion of ppmv readings to other units (mg/m3)Conc. (ppmv) = 24.46 x Conc. (mg/m3)

m.w (g/mol)Conc. (mg/m3) = 0.041 x Conc. (ppmv) x m.w. (g/mol)

Correction Factor Alarm Limit Calculations for Simple Gas MixturesThe PID response of a mixture is weighted to the relative sensitivity and relative concentration of each compound:

TLVmix = 1 / (X1 / TLV1 + X2 / TLV2 + X3 / TLV3 + ... Xi / TLVi )

CFmix = 1 / (X1 / CF1) + X2 / CF2 + X3 / CF3 + ... Xi / CFi )

Alarm Setting = TLVmix / CFmix

where Xi , TLVi, and CFi are the mole fraction of total

VOCs, TLVs, and CFs of the individual components, respectively

Percentage to ppm

0.0001% 1 ppm

0.001% 10 ppm

0.01% 100 ppm

0.1% 1000 ppm

1% 10,000 ppm

10% 100,000 ppm

100% 1,000,000 ppm

Useful web links

Australian Workcover AuthoritiesNSW: www.workcover.nsw.gov.au NT: www.worksafe.nt.gov.auQLD: www.workcoverqld.com.au VIC: www.workcover.vic.gov.auSA: www.workcover.com WA: www.workcover.wa.gov.auTAS: www.workcover.tas.gov.au ACT: www.workcover.act.gov.au

Reference Sites:Safe Work Australia www.safeworkaustralia.gov.au

Australian Institute of Occupational Hygienists AIOH www.aioh.org.au National Institute of Occupational Safety and Health (USA) NIOSH www.cdc.gov/niosh

National Association of Testing Authorities (AUS) NATA www.nata.asn.auAmerican Conference of Governmental Industrial Hygienists ACGIH www.acgih.org

UK Health and Safety Executive HSE www.hse.gov.ukOccupational Safety and Health Administration OSHA www.osha.gov

Instrument Manufacturers:RAE Systems www.raesystems.com.au Arizona Instruments: www.azic.com

SKC Inc www.skcinc.com Occupational Health Dynamics www.ohdusa.comLarson Davis www.larsondavis.com Extech Instruments www.extech.com

Quest Technologies www.questtechnologies.com TSI www.tsi.comHQInc (CorTemp) www.hqinc.net AES Laboratorie www.aeslaboratoire.com

PAGE 43

Helpful Information ...

RENTAL EQUIPMENT

2011

Solutions for Workplace and Environmental Monitoring

www.aesolutions.com.au

Melbourne - Head office: Unit 3, 266 Bolton Street ELTHAM VIC 3095 t: 03 9431 3500 f: 03 9431 3577 Sydney - office: Suite14, L2, 6-8 Holden Street ASHFIELD NSW 2131 t: 02 9716 5966 f: 02 9716 5988 Perth - office: Unit 7, 64 Bannister Road CANNING VALE WA 6155 t: 08 9456 4111 f: 08 6253 8928

[email protected] [email protected] [email protected] book on line: www.aesolutions.com.au

Documents

· Melbourne - Head office: Unit 3, 266 Bolton Street ELTHAM VIC 3095 t: 03 9431 3500 f: 03 9431 3577 Sydney ... UltraRAE 3000