METINVEST GROUP’S PIPES ARE MADE BY ONE OF THE WORLD’S LARGEST LSAW PIPE PRODUCERS - KHARTSYZSK PIPE. THE MAIN SUPPLIERS OF PLATES FOR PIPE PRODUCTION ARE AZOVSTAL L SW AND ILYCH L SW OF MARIUPOL.

KHARTSYZSK PIPE PRODUCES MORE THAN 500 TYPES OF LONGITUDINALLY SUBMERGED ARC WELDED PIPES FOR OIL GAS PIPELINES INCLUDING PIPES FOR HEATING SUPPLY NETWORKS AND OFFSHORE SOUR SERVICE. THE CAPACITY OF THE PLANT’S PRODUCTION FACILITIES IS 1.3 MILLION MTPY.

KHARTSYZSK PIPE COMMISSIONED A NEW PRODUCTION LINE IN 2007 FOR SINGLE-SEAM PIPES WITH DIAMETERS OF 406-1422 MM AND WALL THICKNESSES OF UP TO 40 MM. THE LINE IS EQUIPPED WITH UP-TO-DATE EQUIPMENT SUPPLIED BY GLOBALLY RECOGNIZED COMPANIES HAEU-SLER (SWITZERLAND), LINSINGER (AUSTRIA), UHRHAN SCHWILL (GERMANY), KRAUTKRAMER (GERMANY), UNIWELD (GERMANY), HEINRICH GEORG GMBH (GERMANY).

UPON REQUEST, EXTERNAL ANTICORROSION AND INTERNAL COATINGS (FLOW OR ANTICORROSION) CAN BE APPLIED TO THE ENTIRE RANGE OF PRODUCTS. COATINGS ARE APPLIED USING EQUIPMENT FROM SMS MEER (GERMANY), BAUHUIS (THE NETHERLANDS), LUIGI BANDERA (ITALY), CARLO BANFI (ITALY) AND RADYNE (UK).

THE QUALITY OF THE COATINGS MEET THE REQUIREMENTS OF DIN 30670, NFA 49-710, CSA Z245.20 SERIES - 10, CSA Z245.21 SERIES-10, ISO 21809-1, API RP 5L2, ANSI/AWWA C210 AND DOMESTIC REGULATORY DOCUMENTS. COATING MATERIALS ARE SUPPLIED BY JOTUN (NORWAY), 3M (USA, RUSSIA), 3M EWOOD (UK), AKZO NOBEL (GERMANY), BOREALIS (FINLAND), MPB (ITALY), ARKEMA (FRANCE), TOTAL PETROCHEMICALS (FRANCE).

4 | S A L E S . M E T I N V E S T H O L D I N G . C O M

5W W W . M E T I N V E S T H O L D I N G . C O M |

KHARTSYZSK PIPE IS A CERTIFIED PIPE PRODUCER. IT HAS BEEN CERTIFIED BY API (USA) AND ZETOM (POLAND) ACC. TO API SPEC 5L PSL1 AND PSL2, INCL. ANNEX H (PIPES FOR SOUR SERVICE) AND ANNEX J (PIPE FOR OFFSHORE SERVICE), API SPEC 2B, EN 10208-2. KHARTSYZSK PIPE’S WELDING PROCESS WAS CERTI-FIED BY THE PATONCERT INTERNATIONAL SCIENTIFIC AND TECHNICAL CENTER AS COMPLYING WITH THE REQUIREMENTS OF ISO 3834-2.

THE COMPANY’S QUALITY MANAGEMENT SYSTEM IS CERTIFIED BY API SPEC Q1 (API), ISO 9001 (SAI GLOBAL), DSTY ISO 9001 (VNITI-TEST), AND STO GAZPROM 9001 (RUSSIAN REGISTER). ITS ENVIRONMENTAL AND LABOR SAFETY MANAGEMENT SYSTEMS MEET INTERNATIONAL STANDARDS ISO 14001 AND OHSAS 18001 (SAI GLOBAL), RESPECTIVELY.

6 | S A L E S . M E T I N V E S T H O L D I N G . C O M

STANDARD

ON, ISNEMID EPIP ММ PIPE DIMENSION, INCHES

STEEL GRADE OR STRENGTH GRADEOUTER

DIAMETERWALL

THICKNESSOUTER

DIAMETERWALL

THICKNESS

P I P E S F O R T R U N K P I P E L I N E S

508 8.0-15.9 20 0.315-0.626

A (L210),BM (L245M),

X42M (L290M),X46M (L320M), X52M (L360M),X56M (L390M), X60M (L415M),X65M (L450M), X70M (L485M),X80M (L555M)

558 8.0-19.0 22 0.315-0.748

610 8.0-15.9 24 0.315-0.626

660 8.0-15.9 26 0.315-0.626

711 8.0-14.0 28 0.315-0.551

762 12.5-21.0 30 0.492-0.827

813 8.0-14.0 32 0.315-0.551

864 8.0-14.0 34 0.315-0.551

914 8.0-17.0 36 0.315-0.669

965 10.5-17.0 38 0.413-0.669

1016 8.0-22.5 40 0.315-0.886

1067 8.5-23.0 42 0.335-0.906

1219* 8.0-32.0 48 0.315-1.260

1422* 13.7-32.7 56 0.539-1.287

P I P E S F O R P I P E L I N E S W I T H C O M B U S T I B L E F L U I D S

EN 10208-2:2009 508 8.0-15.9 20 0.315-0.626

L245MB, L290MB, L360MB, L415MB, L450MB,L485MB, L555MB

558 8.0-19.0 22 0.315-0.748

610 8.0-15.9 24 0.315-0.626

660 8.0-15.9 26 0.315-0.626

711 8.0-17.0 28 0.315-0.551

762 12.5-21.0 30 0.492-0.827

813 8.0-14.0 32 0.315-0.551

864 8.0-14.0 34 0.315-0.551

914 8.0-17.0 36 0.315-0.669

965 10.5-17.0 38 0.413-0.669

1016 8.0-22.5 40 0.315-0.886

1067 8.5-23.0 42 0.335-0.906

1219* 8.0-32.0 48 0.315-1.260

1422* 13.7-32.7 56 0.539-1.287

LARGE DIAMETER LSAW PIPES

* 1219-1422 MM PIPES ARE PRODUCED WITH BOTH ONE AND TWO LONGITUDINAL SEAMS.

API SPEC 5L, ISO 3183 FOR PSL 1 AND PSL 2, INCL. ANNEX H (PIPE ORDERED FOR SOUR SERVICE), ANNEX J (PIPE ORDERED FOR OFFSHORE SERVICE)

7W W W . M E T I N V E S T H O L D I N G . C O M |

STANDARD

P I P E D I M E N S I O N SSTEEL GRADE

OR STRENGTH GRADEOUTER DIAMETER, MM

WALL THICKNESS, MM

GO I L A S A N D P I P E S

TU U 27.2-00191135-1873:2009 1220; 1420 13.8-24.8 09G2FB, 09G2BT

TU U 27.2-00191135-017:2012 508-1220 10.0-30.0 Х46, Х52, Х56, Х60, К48, К50, К52

TU U 27.2-00191135-020:2008 530, 630, 720,820, 920, 1020 8.0-32.7 20F (K48), 13HFА (K52), 09GSF (K52),

08HМFCHА (K52)

TU U 27.2-00191135-016:2007 711-1220 8.0-20.0 13GS, 13GS-U, 13G1S-U, 13G1SB-U, 17G1S-U, 09G2FB, 10G2FB, X60, X65, X70

TU U 27.2-00191135-007:2005 530-1220* 8.0-32.0 К42, К48, К50, К52, К54, К55, К56, К60

TU U 27.2-00191135-096:2007 530-1420 8.0-32.7 К52, К55, К56, К60, Х60, X65, Х70

ТU U 27.2-00191135-024:2011 530-1220* 8.0-32.0 К50, К52, К54, К55, К56, К60

TU U 14-8-2-97 1220** 9.5-21.9 13GS, 13GS-U, 13G1S-U, 13G1SB-U, 10G2FB

TU U 14-3-1938-2000 1420** 13.7-23.2 10G2FB, X70

GOST 20295-85 530-1420 8.0-32.7 К38, К42, К50, К52, К54, К55, К56, К60

GOST R 52079-2003 530-1420 8.0-32.7 K34, К38, К42, K48, К50, К52, К54, К55, К56, К60

P I P E S F O R H E A T I N G S U P P LY N E T W O R K S

TU U 322-8-14-96 530, 630, 720, 820 8.0-12.0 STЗSP (S315Т, S345T), 13GS, 13GS-U,13G1S-U

G E N E R A L P U R P O S E P I P E S

GOST 10706-76 530-1420* 8.0-32.7 CARBON AND LOW-ALLOYED STEEL

* 1219-1422 MM DIAMETER PIPES ARE PRODUCED BOTH WITH ONE AND TWO LONGITUDINAL SEAMS.** 1220-1420 MM DIAMETER PIPES ARE PRODUCED WITH TWO LONGITUDINAL SEAMS.

LARGE DIAMETER LSAW PIPES (CONTINUED)

8 | S A L E S . M E T I N V E S T H O L D I N G . C O M

LAUNCH OF NEW PRODUCTS

DOUBLE-SEAMLSAW PIPES OF HIGH-STRENGTH STEEL X80 (K65).

KHARTSYZSK PIPE CONTINUOUSLY IMPROVES TECHNOLOGY IN ORDER TO CONSISTENTLY PRODUCE HIGH QUALITY PRODUCTS EVEN WITH SIGNIFICANT SOPHISTICATION IN ITS PRODUCT RANGE.

LSAW PIPES WITH INTERNAL EPOXY COATING (FLOW COATING TO IMPROVE PIPELINE CAPACITY, AND ANTICORROSION COATING FOR OIL AND WATER PIPELINES).

ACCORDING

LSAW PIPES 1067-1220 MM OF K56 AND K60 FOR THE CONSTRUCTION OF THE EASTERN SIBERIA-PACIFIC OCEAN OIL PIPELINE WITH WORK-ING PRESSURE UP TO 14 MPA USED IN REGIONS WITH UP TO 8 MORE POINTS SEISMICITY.

ACCORDING TO THE (Х70) FOR SECTIONS OF B (CS) HIGHEST CATEGORY GAS PIPELINES WITH WORKING PRESSURE OF 7.4 MPA.

LSAW PIPES WITH A SINGLE SEAM 711-1067 MM (28"-42") WITH WALL THICK-NESSES OF UP TO 17.5 MM AND LENGTHS OF UP TO 12 M FOR OIL GAS PIPELINES.

REQUIREMENTS OF JSC TRANSNEFT.

9W W W . M E T I N V E S T H O L D I N G . C O M |

THE

LAUNCH OF NEW PRODUCTS (CONTINUED)

LSAW SINGLE-WELDED PIPES OF UP TO 1422 MM (56"), WALL THICKNESSES OF UP TO 40 MM AND LENGTHS OF UP TO 12 M FOR OIL GAS PIPELINES.

ACCORDING TO

OIL GAS

10 | S A L E S . M E T I N V E S T H O L D I N G . C O M

TECHNOLOGICAL PROCESS FORSINGLE SEAM PIPE PRODUCTION

W W W . M E T I N V E S T H O L D I N G . C O M |

-

11

TECHNOLOGICAL PROCESS FOR SINGLE SEAM PIPES PRODUCTION (CONTINUED)

12 | S A L E S . M E T I N V E S T H O L D I N G . C O M

TECHNOLOGICAL PROCESS FORDOUBLE SEAM PIPE PRODUCTION

13W W W . M E T I N V E S T H O L D I N G . C O M |

TECHNOLOGICAL PROCESS FOR DOUBLE SEAM PIPE PRODUCTION (CONTINUED)

14 | S A L E S . M E T I N V E S T H O L D I N G . C O M

TECHNOLOGICAL PROCESS OF 3-LAYER EXTERNAL ANTICORROSION COATING APPLICATION

W W W . M E T I N V E S T H O L D I N G . C O M |

-

15

TECHNOLOGICAL PROCESS OFINTERNAL COATING APPLICATION

16 | S A L E S . M E T I N V E S T H O L D I N G . C O M

TECHNICAL CHARACTERISTICS OF EXTERNAL ANTICORROSION COATING

ТU U

27.2-00191135-014:2007

ТU U 27.2-00191135-

009:2005

ТU U 27.2-00191135-

025:2011ТU U 14-8-23-2000

DIAMETER, M M 530-1420 530-1220 530-1420

OPERATING T°

NORMAL, SPECIAL VERSION: FROM -20 °C

TO +60 °C

THERMORESISTANT VERSION: FROM -20 °C

TO +80 °C

FROM -20 °C TO +60 °CHEAT-RESISTANT VERSION:

FROM -20 °C TO +80 °C

FROM -20 °С TO +60 °СHEAT-RESISTANT VERSION:

FROM -20 °С TO +80 °С

FROST-RESISTANT VERSION: FROM -40°С TO +60°С

TO +60 °C

COATING SYSTEM 3-LAYER POLYETHYLENE

MINIMAL COATING THICKNESS IN MM, FOR PIPES WITH DIAMETER OF (MM):

530 NORMAL, THERMORESISTANT

VERSION - 2.5. SPECIAL VERSION - 3.0**

2.2; 2.5 (TYPE 4) –

530 - 820* 2.5; 3.0 (TYPE 4) –

≤1020 – – 2.5

820 – 1420***

NORMAL, THERMORESISTANT

VERSION - 3.0. SPECIAL VERSION - 3.5**

3.0; 3.5 (TYPE 4) –

≥1020

NORMAL, THERMORESISTANT

VERSION - 3.0.

SPECIAL VERSION - 3.5

– 3.0

1420**** – – 3.5

UPON REQUEST – INCREASED HIGHLY REINFORCED, 3.5

* INCLUDING 820 MM** FOR PIPES WITH WALL THICKNESSES OF OVER 18 MM, THE MINIMAL COATING THICKNESS MUST BE INCREASED BY 0.5 MM.

**** WALL THICKNESS 18.3 MM AND UP*** INCLUDING 1420 MM

17W W W . M E T I N V E S T H O L D I N G . C O M |

TECHNICAL CHARACTERISTICS OF EXTERNALANTICORROSION COATING (CONTINUED)

DIN 30670

DIAMETER, MM 508-1422

OPERATING T° FROM -20 °C TO +60 °C (TYPE N)FROM -40 °C TO +80 °C (TYPE S)

COATING SYSTEM 3-LAYER POLYETHYLENE

MINIMAL COATING THICKNESS IN MM, FOR PIPES WITH DIAMETER OF (MM):

NORMAL REINFORCED

500-800 2.5 3.2

≥ 800 3.0 3.7

18 | S A L E S . M E T I N V E S T H O L D I N G . C O M

INTERNAL COATING

API RP 5L2 ANSI/AWWA С210 TU U 27.2-00191135-011:2007

TU U27.2-00191135-021:2010

DIAMETER, M M 508-1422 508-1422 530-1420 508-1422

OPERATING T° – – FROM - 20°С TO +60°C FROM -20°С TO +60°C

COATING THICKNESS, μm MIN. 38 MIN. 406 60-150MIN. 60 (А MODIFICATION)

MIN. 200 (B MODIFICATION)MIN. 300 (V MODIFICATION)

FLOW COATING IS BASED ON EPOXY TWO-PART COMPONENT MATERIALS PRODUCED BY ЗМ E. WOOD (UK), AKZO NOBEL (SWEDEN).

CONTENT OF SOLVENTS OR WITHOUT SOLVENTS FOR ANTICORROSION PROTECTION OF OIL PIPELINES, WATER PIPELINES, INCLUDING DRINKABLE WATER, ACCORDING TO ANSI/AWWA C210 «LIQUID-EPOXY COATING SYSTEMS FOR THE INTERIOR AND EXTERIOR OF STEEL WATER PIPELINES» STANDARD REQUIREMENTS AND TU U 27.2-00191135-021:2010.

INTERNAL FLOW COATING WITH THICKNESSES OF 60-80 µm IS DESIGNED TO INCREASE THE CARRYING CAPACITY OF GAS PIPELINES AND PROTECT THE INTERNAL SURFACE OF PIPES DURING STORAGE. THE QUALITY OF INTERNAL FLOW COATING CONFORMS WITH THE STANDARD REQUIREMENTS OF API RP 5L2 «RECOMMENDED PRACTICE FOR INTERNAL COATING OF LINE PIPE FOR NON-CORROSIVE GAS TRANSMIS-SION SERVICE», TU U 27.2-00191135-011:2007, AND THE TECHNICAL SPECIFICATIONS OF CUSTOMERS.

CONTENT OF SOLVENTS OR WITHOUT SOLVENTS FOR ANTICORROSIONPROTECTION OF OIL PIPELINES, WATER PIPELINES, INCLUDINGDRINKABLE WATER, ACCORDING TO THE STANDARD REQUIREMENTS OF ANSI/AWWA C210 «LIQUID EPOXY COATING SYSTEMS FOR THE INTERIOR AND EXTERIOR OF STEEL WATER PIPELINES» AND TU U 27.2-00191135-021:2010.

INTERNAL COATING IS THE EPOXY TWO-PART COMPONENT MATERIAL NAVIGUARD NM, TANKGUARD 412 PRODUCED BY JOTUN (NORWAY) AND VIKING PRODUCED BY ERNESTO STOPPANI S.P.A (ITALY).

19W W W . M E T I N V E S T H O L D I N G . C O M |

IN PARTNERSHIP WITH METINVEST

OUR PROJECTS

OUR BUYERS

GAS PIPELINES:URENGOI - PETROVSKURENGOI - UZHGORODURENGOI - NOVOPSKOVSKURENGOI - CENTER 1URENGOI - CENTER 2YAMBURG - YELETS 1NADYM - PUNGASRTO - TORZHOKMYLDZHINO - VERTIKOSCENTRAL ASIA - CENTERSHATLYK - KHIVAYAMAL - WESTERN EUROPEDZHANKOI - FEODOSIA - KERCHANANYEV - IZMAILBLUE STREAM (RUSSIA-TURKEY)ZAPOLYARNOE - URENGOIEGYPT - JORDANEELAM - KERMANSHAH (IRAN)

CENTRAL ASIA - CHINA (А,В, С)

POCHINKI - GRYAZOVETSEAST - WEST (TURKMENISTAN)BEINEU - BOZOY - SHYMKENT (KAZAKHSTAN)

OIL PIPELINES:DRUZHBA 1DRUZHBA 2PRIVOLZHSK OILS - WESTERN BORDERUST-BALYK - UFA - KURGAN - ALMETYEVSKNIZHNEVARTOVSK - KURGAN - KUIBYSHEVSURGUT - POLOTSKKHOLMOGORY - KLINTENGIZ - GURYEV - ASTRAKHAN - GROZNYIODESSA - BRODYBRODY - UZHGORODKENKIYAK - KUMKOL (KAZAKHSTAN)ZHANAZHOL OIL FIELD - KS13 (KAZAKHSTAN - CHINA)ATASU - ALASHANKOU (KAZAKHSTAN - CHINA)EASTERN SIBERIA - PACIFIC OCEAN - 1, 2 EXTENSION

WATER PIPELINES:GUANDU - REDUC (BRAZIL)CHIGIL - NISHAN (UZBEKISTAN)

UKRTRANSGAS AC, UKRAINEOJSC UKRTRANSNAFTA, UKRAINEOJSC GAZPROM, RUSSIAGAZKOMPLEKTIMPEX LLC, RUSSIAOJSC SC TRANSNEFT, RUSSIAOJSC ROSTRANSNEFT, RUSSIAOJSC STROITRANSGAZ, RUSSIAEURASIAN PIPELINE CONSORTIUM LLC, RUSSIAJSC KAZTRANSGAS, KAZAKHSTANJSC KAZTRANSOIL, KAZAKHSTANJSC CNPC - AKTOBEMUNAIGAZ, KAZAKHSTANJSC OGCC KAZSTROYSERVICE, KAZAKHSTANCJSC INTERGAZ CENTRAL ASIA, KAZAKHSTANJSC UZTRANSGAS, UZBEKISTANNHC UZBEKNEFTEGAS, UZBEKISTANSC TURKMENGAS, TURKMENISTANSC TURKMENNEFT, TURKMENISTANSC TURKMENNEFTEGAZSTROY, TURKMENISTAN

SOCAR, АZERBAIJANGOGC, GEORGIAOJSC BELTRANSGAS, BELARUSSPA BELENERGY, BELARUSOJSC BELARUSKALI, BELARUSTHYSSENKRUPP ENERGOSTAL S.A., POLANDPREUSSAG HANDEL A.G., GERMANYMOBAR ENGINEERING GMBH, GERMANYC4GAS, FRANCEKUWAIT PIPE INDUSTRIES & OIL SERVICES CO., KUWAITLARSEN & TOURBO LIMITED, INDIANIGC, IRANCNPC, CHINASTEMCOR INC., USAMAN FERROSTAAL AG, USAPETROBRAS, BRAZIL

CONTACTS

WEBSITE

SALES SERVICE WEBSITE

Metinvest International SAInternational export sales (outside the CIS and Ukraine)

2 Rue Vallin, Geneva1201, Switzerlandtel. +41 22 906 18 28sales@metinvest-international.com

WORLD

Via XII Ottobre, 316121 Genova, Italytel.: +39 010 576 29 11fax: +39 010 576 29 90sales@metinvest-westerneurope.com

1 Dobrudzha Str., 1000 Sofia, Bulgariatel.: +359 886 007 204office.sofia@promet.bg

EUROPEMetinvest Western Europe Metinvest South-East Europe

Metinvest DistributionSales to Belarus

2 Tolbukhina St., Office 30, Minsk,220012, Belarustel. + 37 (517) 336 55 56

Metinvest-SMCRetail sales in Ukraine

15A Leiptsyzka str., Kyiv,01015, Ukrainetel. 0800303070, +38 (044) 581 44 37 sales@metinvest-smc.com

Metinvest EurasiaWholesale and retail sales in Russia

17 Vereyskaya St, Office 105, Moscow,121357, Russiatel. + 7 (495) 739 26 26sales@metinvest-eurasia.com

CIS