Meyer Catalog

Engl

ish

Gag

e Se

tsM

etric

Gag

e Se

tsC

lass

XG

age

Sets

Cus

tom

Len

gth

Cla

ss X

& Z

ZG

O/N

OG

OG

ages

&A

cces

s.Ta

perlo

cks

& T

riloc

ks

Meyer Gage Company, Inc.230 Burnham Street, South Windsor, CT 06074Tel.860 528-6526Toll Free 1 800 243-7087Fax 860 528-1428 (24Hours)www.meyergage.com

Distributed by:

WARRANTY: Meyer Gage warrants all gages for 30 days from the date ofshipment, except in cases of customer error or mishandling.This 30 day period allows ample time for all gages to beinspected for any manufacturing inaccuracies.

ORDERING INFORMATION: Visit our Distributor locater @www.meyergage.com to find yourlocal Distributor, or call us direct for a Distributor nearest you.

RETURNS AND EXCHANGES: An RMA is required for all exchanges and returns. Please contactour customer service department for assistance.

CERTIFICATIONS: For details see page 27.

MINIMUM ORDER CHARGE:There is a twenty dollar minimum charge.

Ring

Gag

es

© 2005 Meyer Gage Company, Inc. Prices subject to change without notice. Not responsible for typographic pricing errors. Printed in U.S.A.

QUALITY POLICY STATEMENT:Meyer Gage Co. will strive to ensure customer satisfaction bycontinuously improving the effectiveness of our process, andproviding on time delivery of defect free products to our valuedcustomers.

Complete Customer Satisfaction is our Goal.

All Meyer gages andsets are made in theU.S.A.

Fixed Limit Gages2005/2006 Catalog

G a g e M a k e r s f o r t h e Wo r l d

MEYER GAGE

ISO 9001CERTIFIED

2.

Plug Gage Measuring - the art of using pre-sized precisionmetal plugs to determine the acceptability of diameters ofdrilled or machined holes.

GO/NOGO Measurement - A GO gage is used to check thelower limit of a hole. A NOGO gage is used to check the upper limit of a hole. If the GO gage enters the hole and theNOGO gage is unable to enter, the design specifications of thehole have been met.

Uses - for precision GO/NOGO measuring of hole sizes anddepths, checking hole location and distance, and settingmicrometers. All gages are uniformly 2” long with groundends, allowing you to use both ends for increased gage life.Gages are Carbon Chrome Alloy Steel (grade 52100 bearingquality steel) and heat treated to a 60-62 Rockwell C hardness.All of our products come with a Certificate of ClassConformance, traceable to NIST (National Institute forStandards Technology). The size and “+” (GO) or “-”(NOGO) are laser etched with a Meyer Exclusive SerialNumber feature to ensure traceability on your shop floor onall gages that are .061” and larger.

Class ZZ Gages - These gages have an inch tolerance of.0002” and a metric tolerance of .005mm. They are practicalwhere good precision and speed are important.

Class Z Gages - These gages have an inch tolerance of .0001”and a metric tolerance of .0025mm. They are one half thedeviation of the ZZ for a better fit.

Class X Gages - These gages are available with an inchtolerance of .00004” and a metric tolerance of .001mm. These

The ABC’s of Plug Gages

Gage Makers Tolerance ChartPlain Plug, Plain Ring & Master Gage Tolerances

INCH

METRIC

RANGE CLASS XX X Y Z ZZ

.0009” to .8250” .000020” .000040” .000070” .000100” .000200.8251” to 1.5100” .000030” .000060” .000090” .000120” .000240”1.5101” to 2.5100” .000040” .000080” .000120” .000160” .000320”2.5101” to 4.5100” .000050” .000100” .000150” .000200” .000400”4.5101” to 6.5100” .000065” .000130” .000190” .000250” .000500”6.5101” to 9.0100” .000080” .000160” .000240” .000320” .000640”9.0101” to 12.2600” .000100” .000200” .000300” .000400” .000800”

1.00mm to 21.00mm .0005mm .0010mm .0018mm .0025mm .0050mm21.01mm to 38.00mm .0008mm .0015mm .0023mm .0030mm .0060mm38.01mm to 64.00mm .0010mm .0020mm .0030mm .0040mm .0080mm64.01mm to 115.00mm .0013mm .0025mm .0038mm .0050mm .0100mm115.01mm to 165.00mm .0017mm .0033mm .0048mm .0060mm .0130mm165.01mm to 230.00mm .0020mm .0041mm .0061mm .0080mm .0160mm230.01mm to 300.00mm .0025mm .0051mm .0076mm .0100mm .0200mm

gages are used where greater precision is needed.

Class XX Gages - These gages have an inch tolerance of.00002” and a metric tolerance of .0005mm. They are one halfof the deviation of the X. Great for your most critical needs.

Length and Finish - All gages are 2 inches or 51mm longwith ground ends for long life.

52100 Steel - This is bearing quality, Carbon Chrome AlloySteel, heat treated to 60-62 Rockwell C hardness and isconsidered the preferred material for the highest qualityplug gages.

Certificate of Class Conformance - Assurance issuedwith each shipment of quality gages that conformancecharacteristics are traceable to NIST.

NIST - National Institute of Standards and Technology

Serial Number Etching - A feature that is exclusive to MeyerGages and essential in assuring traceability on the shop flooron all gages over .060”.

Information on How to Take Careof your Meyer Gage

Clean the part before gaging.Get rid of dirt, coolant,

and chips.

Do not force the gage.Use light pressure.

Protect the gage from damage.Nicks and burrs allow

inaccurate results.

Keep gages clean and oiled.This increases wear life.

Avoid handling gaging surfaces.Fingerprints cause rust.

3.

Meyer Gage Corporate MessageThere has always been a Meyer in the house. From founder Albert Meyer to John and James today, theMeyer feel for product quality and customer satisfaction is always guiding the growth of the company.“We are plug gage specialists selling to a segment of the market, that demands the most consistent, highlevel quality, at sensible prices, and we never forget it.”

At Meyer Gage, everybody is very aware that the world of manufacturing and quality is changingconstantly. Since 1965, we have been focused on producing the very finest, fixed limit gages, available inthe world. Our company logo says it all, “Gage Makers for the World.”

Keep your eyes on us in 2005 and 2006. We are changing to meet the challenges and needs of our mostvalued asset, you the customer. Everything from computer software to hardware, is on the move. InAugust 2004 we installed a new computer network with Prophet 21 software to better serve your needs.In 2003-2004, our factory acquired the finest grinding and lapping equipment available.

Quality Policy Statement

Meyer Gage Co. will strive to ensure customer satisfaction by continuously improving the effectiveness ofour process and providing on time delivery of defect free products to our valued customers.

Table of ContentsThe ABC’s of Plug Gages . . . . . . . . . . . . . . . . . . . . . . . 2

Corporate Message . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Care of Gages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

English Class Z Gage Sets . . . . . . . . . . . . . . . . . . . . . 4

English Class Z Library Series . . . . . . . . . . . . . . . . . . 5

Metric Class Z Gage Sets . . . . . . . . . . . . . . . . . . . . . . 6

Metric Class Z Library Series . . . . . . . . . . . . . . . . . . . 7

English Class X Gage Sets . . . . . . . . . . . . . . . . . . . . . 8

English Class X Library Series . . . . . . . . . . . . . . . . . . 9

MG-25 Series Class X Tenth Sets . . . . . . . . . . . . . . . 10

Custom Length Class ZZ Gages . . . . . . . . . . . . . . . 11

Custom Length Class X Gages . . . . . . . . . . . . . . . . 12

English & Metric Individual Class Z Pins . . . . . . 13

English & Metric Individual Class X Pins . . . . . . 14

English & Metric Individual Class XX Pins . . . . . 14

English GO/NOGO Assemblies . . . . . . . . . . . . . . 15

Metric GO/NOGO Assemblies . . . . . . . . . . . . . . . 16

Gage Handles & Bushings . . . . . . . . . . . . . . . . . . . . 17

Gage Storage Accessories . . . . . . . . . . . . . . . . . . . . . 18

Taperlock Style Gages . . . . . . . . . . . . . . . . . . . . . . . . 19

Trilock Style Gages . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Ring Gages Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Ring Gages Steel & Carbide . . . . . . . . . . . . . . . . . . . 22

Progressive Style Gages . . . . . . . . . . . . . . . . . . . . . . 23

Master Setting Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Hex Gages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Thread Measuring Wires . . . . . . . . . . . . . . . . . . . . . 26

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

EnglishGage Sets

Engl

ish

Gag

e Se

ts

Meyer GageClass Z Pin SetsWe started making theoriginal ZZ back in 1965and our competition hastried, but can’t copy thequality of these affordablepin gage sets. We nowhave taken the extra stepfor the better pin gage,Class Z. Introducing theMEYER Z. A closertolerance (.0001), moreaccurate and better foryour needs. (See top rightcorner of page for details.)We have done it again.We’ve made a better pingage that no other hasattempted with the samegreat features listed below.

Gage Set No. Gage - Size Pieces Wt./Lbs. PriceFEATURES:MORE FEATURES THANGAGES COSTING TWICETHE PRICE.❑ All gages and sets are

traceable to N.I.S.T.❑ Boxes and gages both

marked ❑ Size and serial number

laser etched on eachpiece (M-O not etched)

❑ Material: 52100Bearing Steel

❑ No sharp edges❑ All members 2” long

USES:❑ Checking locations❑ Measuring hole sizes

and depth❑ GO & NO/GO gaging❑ Setting micrometers❑ Checking distances

between holes

Finish:❑ Centerless lapped❑ Each gage is inspected

and has a 8 microfinishor better

❑ Heat treated to a hard -ness of 60-62 Rockwell C

❑ All English gages with .0001” limit

4.

M0M - minus .011 to .060 50 1 $64.20M0P - plus .011 to .060 50 1 $64.20M05M - minus .0115 to .0605 50 1 $64.20M05P - plus .0115 to .0605 50 1 $64.20M1M - minus .061 to .250 190 7 $144.45M1P - plus .061 to .250 190 7 $144.45M15M - minus .0615 to .2505 190 7 $144.45M15P - plus .0615 to .2505 190 7 $144.45C10M - minus .011 to .250 240 7 $197.95C10P - plus .011 to .250 240 7 $197.95C105M - minus .0115 to .2505 240 7 $197.95C105P - plus .0115 to .2505 240 7 $197.95M2M - minus .251 to .500 250 23 $214.00M2P - plus .251 to .500 250 23 $214.00M25M - minus .2515 to .5005 250 23 $214.00M25P - plus .2515 to .5005 250 23 $214.00M3M - minus .501 to .625 125 24 $251.45M3P - plus .501 to .625 125 24 $251.45M35M - minus .5015 to .6255 125 24 $251.45M35P - plus .5015 to .6255 125 24 $251.45M4M - minus .626 to .750 125 33 $278.20M4P - plus .626 to .750 125 33 $278.20M45M - minus .6265 to .7505 125 33 $278.20M45P - plus .6265 to .7505 125 33 $278.20M5M - minus .751 to .832 82 29 $472.50M5P - plus .751 to .832 82 29 $472.50M55M - minus .7515 to .8325 82 29 $472.50M55P - plus .7515 to .8325 82 29 $472.50M6M - minus .833 to .916 84 35 $551.25M6P - plus .833 to .916 84 35 $551.25M65M - minus .8335 to .9165 84 35 $551.25M65P - plus .8335 to .9165 84 35 $551.25M7M - minus .917 to 1.000 84 41 $577.50M7P - plus .917 to 1.000 84 41 $577.50M75M - minus .9175 to 1.0005 84 41 $577.50M75P - plus .9175 to 1.0005 84 41 $577.50

IMPROVED

Here is a comparison of the Class ZZ and theClass Z gage pin specifications.

OLD NEWClass ZZ Class ZSize deviation .0002” Size deviation .0001”Roundness geometry .0001” Roundness geometry .00005”Surface finish 10 micro Surface finish 8 micro

The Meyer Gage Class Z gage pin will meet or exceed therequirements of Class ZZ, and can replace the Class ZZ inany situation or application.

English Library Series

5.

EnglishG

age Sets.0001 CLASS Z LIBRARY SERIESModel Number Wt./Lbs. Size Range Number of Members PriceL-C - minus 120 .011” to .750” (740 gages) $1,106.00L-C - plus 120 .011” to .750” (740 gages) 1,106.00L-1 - minus 120 .061” to .750” (690 gages) 1,056.00L-1 - plus 120 .061” to .750” (690 gages) 1,056.00L-2 - minus 95 .061” to .5005” (880 gages in .0005” increments) 896.00L-2 - plus 95 .061” to .5005” (880 gages in .0005” increments) 896.00L-2C - minus 96 .011” to .5005” (980 gages in .0005” increments) 996.00L-2C - plus 96 .011” to .5005” (980 gages in .0005” increments) 996.00L-3** - minus 240 .061” to 1.000” (940 gages) 2,692.00L-3** - plus 240 .061” to 1.000” (940 gages) 2,692.00L-4** - minus 240 .011” to 1.000” (990 gages) 2,742.00L-4** - plus 240 .011” to 1.000” (990 gages) 2,742.00L-5 - minus 140 .751” to 1.000” (250 gages) 1,761.00L-5 - plus 140 .751” to 1.000” (250 gages) 1,761.00** Consists of one seven-drawer cabinet

Upgrade Existing SetsModel Number Wt./Lbs PriceL-E4 38 four drawer cabinet, empty $265.00L-IN4 46 four drawer cabinet with four inserts of your choice 325.00L-E7 57 seven drawer cabinet, empty $400.00L-IN7 65 seven drawer cabinet with seven inserts of your choice 505.00

M0MMM - minus .22 to 1.50 65 1 $83.46M0MMP - plus .22 to 1.50 65 1 $83.46M01MMM - minus .23 to 1.51 65 1 $83.46M01MMP - plus .23 to 1.51 65 1 $83.46M1MMM - minus 1.52 to 7.70 310 10 $294.25M1MMP - plus 1.52 to 7.70 310 10 $294.25M11MMM - minus 1.53 to 7.71 310 10 $294.25M11MMP - plus 1.53 to 7.71 310 10 $294.25M2MMM - minus 7.72 to 12.70 250 25 $316.72M2MMP - plus 7.72 to 12.70 250 25 $316.72M21MMM - minus 7.73 to 12.71 250 25 $316.72M21MMP - plus 7.73 to 12.71 250 25 $316.72M3MMM - minus 12.72 to 15.30 130 24 $350.96M3MMP - plus 12.72 to 15.30 130 24 $350.96M31MMM - minus 12.73 to 15.31 130 24 $350.96M31MMP - plus 12.73 to 15.31 130 24 $350.96M4MMM - minus 15.32 to 17.80 125 30 $372.36M4MMP - plus 15.32 to 17.80 125 30 $372.36M41MMM - minus 15.33 to 17.81 125 30 $372.36M41MMP - plus 15.33 to 17.81 125 30 $372.36M5MMM - minus 17.82 to 20.36 128 38 $442.05M5MMP - plus 17.82 to 20.36 128 38 $442.05M51MMM - minus 17.83 to 20.37 128 38 $442.05M51MMP - plus 17.83 to 20.37 128 38 $442.05M6MMM - minus 20.38 to 22.04 84 32 $529.20M6MMP - plus 20.38 to 22.04 84 32 $529.20M61MMM - minus 20.39 to 22.05 84 32 $529.20M61MMP - plus 20.39 to 22.05 84 32 $529.20M7MMM - minus 22.06 to 23.72 84 37 $611.10M7MMP - plus 22.06 to 23.72 84 37 $611.10M71MMM - minus 22.07 to 23.73 84 37 $611.10M71MMP - plus 22.07 to 23.73 84 37 $611.10M8MMM - minus 23.74 to 25.40 84 41 $627.90M8MMP - plus 23.74 to 25.40 84 41 $627.90M81MMM - minus 23.75 to 25.41 84 41 $627.90M81MMP - plus 23.75 to 25.41 84 41 $627.90

MetricGage Sets

6.

Just look at this selection ofMetric gage pin sets. If wedon’t make it you probablydon’t need it! These setshave all the features of ourEnglish sets, but provide thefiner increments in size thatyou just can’t get by convert-ing English to Metric.

FEATURES:MORE FEATURES THANGAGES COSTING TWICETHE PRICE.

❑ All gages and sets are traceable to N.I.S.T.

❑ Boxes and gages bothmarked

❑ Size and serial numberlaser etched on eachpiece (M-O not etched)


❑ No sharp edges❑ 51mm overall length❑ All sets in .02mm

increments



between holes


and has a 8 microfinish or better


❑ All metric gages with .0025mm tolerance limit

Gage Set No. Gage - Size Pieces Wt./Lbs. Price

Met

ricG

age

Sets

Meyer GageClass Z Pin Sets

Class Z

IMPROVED

7.

Metric

Gage Sets

Metric Library Series.0025 METRIC LIBRARY SERIESModel Number Wt./Lbs. Size Range Number of Members Price

L-10mm - minus 124 1.52mm to 17.80mm (815 gages) $1,473.00L-10mm - plus 124 1.52mm to 17.80mm (815 gages) 1,473.00L-11mm - minus 124 1.53mm to 17.81mm (815 gages) 1,473.00L-11mm - plus 124 1.53mm to 17.81mm (815 gages) 1,473.00L-20mm - minus 183 17.82mm to 25.40mm (380 gages) 2,331.00L-20mm - plus 183 17.82mm to 25.40mm (380 gages) 2,331.00L-21mm - minus 183 17.83mm to 25.41mm (380 gages) 2,331.00L-21mm - plus 183 17.83mm to 25.41mm (380 gages) 2,331.00L-30mm - minus** 305 1.52mm to 25.40mm (1195 gages) 3,804.00L-30mm - plus** 305 1.52mm to 25.40mm (1195 gages) 3,804.00L-31mm - minus** 305 1.53mm to 25.41mm (1195 gages) 3,804.00L-31mm - plus** 305 1.53mm to 25.41mm (1195 gages) 3,804.00** Consists of 2 four drawer cabinets


*IMPORTANT: Specify PLUS or MINUS when ordering individual members.

8.

Class XGage Sets

Cla

ss X

Gag

e Se

ts Offers the same “features” asour Class Z pin gages butwith .00004” tolerance limitand .00002” roundness limit.These pins are perfect forcritical inspection needs orwhen you want to maximizeyour GO/NOGO tolerancelimits. They're also a great way to calibrate measuring equipment, micrometers and calipers.

Gage Set No. Gage - Size Pieces Wt./Lbs. PriceFEATURES:

❑ All gages and sets aretraceable to N.I.S.T.

❑ Boxes and gages bothmarked

❑ Size and serial numberlaser etched on eachpiece (M-OX not etched)


❑ No sharp edges❑ All members 2” long



between holes


and has a 2 microfinishor better


❑ All English gages with .00004” limit

M0XM - minus .011 to .060 50 1 $374.00M0XP - plus .011 to .060 50 1 $374.00M05XM - minus .0115 to .0605 50 1 $374.00M05XP - plus .0115 to .0605 50 1 $374.00M1XM - minus .061 to .250 190 7 $982.80M1XP - plus .061 to .250 190 7 $982.80M15XM - minus .0615 to .2505 190 7 $982.80M15XP - plus .0615 to .2505 190 7 $982.80C10XM - minus .011 to .250 240 7 $1300.00C10XP - plus .011 to .250 240 7 $1300.00C105XM - minus .0115 to .2505 240 7 $1300.00C105XP - plus .0115 to .2505 240 7 $1300.00M2XM - minus .251 to .500 250 23 $1300.00M2XP - plus .251 to .500 250 23 $1300.00M25XM - minus .2515 to .5005 250 23 $1300.00M25XP - plus .2515 to .5005 250 23 $1300.00M3XM - minus .501 to .625 125 24 $1104.00M3XP - plus .501 to .625 125 24 $1104.00M35XM - minus .5015 to .6255 125 24 $1104.00M35XP - plus .5015 to .6255 125 24 $1104.00M4XM - minus .626 to .750 125 33 $1170.00M4XP - plus .626 to .750 125 33 $1170.00M45XM - minus .6265 to .7505 125 33 $1170.00M45XP - plus .6265 to .7505 125 33 $1170.00M5XM - minus .751 to .832 82 29 $983.00M5XP - plus .751 to .832 82 29 $983.00M55XM - minus .7515 to .8325 82 29 $983.00M55XP - plus .7515 to .8325 82 29 $983.00M6XM - minus .833 to .916 84 35 $1035.00M6XP - plus .833 to .916 84 35 $1035.00M65XM - minus .8335 to .9165 84 35 $1035.00M65XP - plus .8335 to .9165 84 35 $1035.00M7XM - minus .917 to 1.000 84 41 $1187.00M7XP - plus .917 to 1.000 84 41 $1187.00M75XM - minus .9175 to 1.0005 84 41 $1187.00M75XP - plus .9175 to 1.0005 84 41 $1187.00

100% Inspectedfor ACCURACY!


.00004” CLASS X LIBRARY SERIESModel Number Wt./Lbs. Size Range Number of Members PriceL-CX - minus 120 .011” to .750” (740 gages) $4,874.00L-CX - plus 120 .011” to .750” (740 gages) 4,874.00L-1X - minus 120 .061” to .750” (690 gages) 4,520.00L-1X - plus 120 .061” to .750” (690 gages) 4,520.00L-2X - minus 95 .061" to .5005” (880 gages in .0005” increments) 4,443.00L-2X - plus 95 .061” to .5005” (880 gages in .0005” increments) 4,443.00L-2CX - minus 96 .011” to .5005” (980 gages in .0005” increments) 5,080.00L-2CX - plus 96 .011” to .5005” (980 gages in .0005” increments) 5,080.00L-3X** - minus 240 .061” to 1.000” (940 gages) 7,636.00L-3X** - plus 240 .061” to 1.000” (940 gages) 7,636.00L-4X** - minus 240 .011” to 1.000” (990 gages) 7,938.00L-4X** - plus 240 .011” to 1.000” (990 gages) 7,938.00** Consists of one seven-drawer cabinet

CLASS X Library Series

9.

Class X

Gage Sets

GAGE SET NO. NOMINAL SIZE RANGE SET PRICEEnglish or Metric

MG1-25 .0110 to .0609 11.28mm to 1.54mm $199.00MG2-25 .0610 to .2509 11.55mm to 6.37mm $ 99.00MG3-25 .2510 to .5009 16.38mm to 12.72mm $114.13MG4-25 .5010 to .7499 12.73mm to 19.04mm $157.50MG5-25 .7500 to .8129 19.05mm to 20.64mm $220.50

To order, simply select your nominal size from any .0001” English or .01mm Metric increment and direction of tolerance.Then refer to the above chart to find the set price.

Telephone 860 528 6526 or 1 800 243 7087 FAX 860 528 1428www.meyergage.com

ClassXMG-25 SeriesMG-25 PIN GAGE SETSin .0001” increments or .01mm increments.

Used as masters to calibrate measuringequipment and check linearity of comparators,micrometers, and calipers. These “Tenth Step”gage sets have unlimited applications, suchasquality control inspection, prototype work andproduction layout. Inspectors select from therange of pins to find the size of a hole or slot.These round masters simulate a cylindrical partwhich, unlike flat blocks, can detect uneven wearon the tips of micrometers and calipers. The thin“line” of contact detects uneven face wear better than flat gageblocks with large contact area.

Features:

❏ Each set contains 25 pieces of Class X tolerance (.00004”) gage pins. Traceable to NIST.

❏ Choice of two tolerances: Plus (+.00004”) or Minus (-.00004”)

❏ Sets consist of a center nominal size, and 12 gages larger in .0001” steps and 12 gages smaller in .0001”steps.

❏ Each gage is inspected and has a 2 microfinish or better.

❏ Heat treated and through hardened to 60-62 Rockwell C

❏ All pin gages over .060” or 1. 51mm are laser marked with size direction of tolerance and serial number fortraceability.

10.

Cla

ss X

Gag

e Se

ts

As little as

$3.96 per

gage in sets

11.

ClassZZGages

Reversible pin gages up to 12”lengths. These are invaluablewhen you need to gage deepor hard to reach holes or slots.❑ Centerless ground to a 10

microfinish or better❑ Made from HSS Steel❑ Plus, Minus or Bilateral

tolerance❑ NIST Traceable❑ Stabilized and heat treated

to 62-64RC

CustomLength

Diameter Range 2.5” 3” 4” 5” 6” 9” 12”

0.0110” to 0.0629" 0.279mm to 1.575mm $35.91 $36.86 $37.59 $39.27 $41.37 $43.05 $162.48

0.0630” to 0.1879” 1.576mm to 4.750mm 35.81 35.91 36.02 37.28 39.06 42.11 63.42

0.1880” to 0.2509” 4.751mm to 6.350mm 36.33 36.65 36.54 37.59 39.59 44.73 65.21

0.2510” to o.3129” 6.351mm to 7.925mm 37.80 37.91 38.12 38.22 39.80 47.15 68.04

0.3130” to 0.3759” 7.926mm to 9.525mm 39.17 39.27 39.38 39.48 42.11 51.45 74.45

0.3760” to 0.4389” 9.526mm to 11.125mm 44.73 44.94 45.05 45.15 45.26 54.71 79.91

0.4390” to 0.5009” 11.126mm to 12.700mm 43.16 50.40 50.40 48.72 44.94 58.80 83.69

0.5010” to 0.5319” 12.701mm to 13.487mm 44.63 49.98 49.98 51.66 47.15 57.96 82.32

0.5320” to 0.5639” 13.488mm to 14.300mm 45.36 51.14 51.14 53.13 48.72 60.38 85.05

0.5640” to 0.5949” 14.301mm to15.088mm 46.10 52.29 52.29 54.60 50.19 62.58 88.94

0.5950” to 0.6259” 15.089mm to 15.875mm 46.83 53.55 53.55 56.07 51.66 65.10 91.88

0.6260” to 0.6569” 15.876mm to 16.662mm 47.67 55.34 55.34 57.86 57.86 68.67 96.18

0.6570” to 0.6879” 16.663mm to 17.450mm 48.41 56.60 56.60 59.22 59.22 71.09 99.96

0.6880” to 0.7189” 17.451mm to 18.237mm 49.56 57.96 57.96 61.43 61.43 73.82 103.95

0.7190” to 0.7509” 18.238mm to 19.050mm 50.09 59.01 59.01 62.58 62.58 76.02 105.42

0.7510” to 0.7819” 19.051mm to 19.837mm 51.14 59.96 59.96 64.58 64.58 77.91 107.94

0.7820” t0 0.8129” 19.838mm to 20.625mm 52.19 61.22 61.22 66.68 66.68 80.33 111.93

0.8130” to 0.8439” 20.626mm to 21.412mm 52.82 62.27 62.27 68.04 68.04 82.53 115.40

0.8440” to 0.8759” 21.413mm to 22.225mm 53.76 63.84 63.84 70.04 70.04 85.58 118.55

0.8760” to 0.9069” 22.226mm to 23.012mm 54.50 65.31 65.31 71.40 71.40 88.52 124.43

0.9070” to 0.9379” 23.013mm to 23.800mm 55.55 66.68 66.68 73.40 73.40 91.35 127.79

0.9380” to 0.9689” 23.801mm to 24.587mm 56.49 68.04 68.04 75.29 75.29 94.08 131.99

0.9690” to 1.0009" 24.588mm to 25.400mm 57.75 69.93 69.93 77.81 77.81 97.97 137.03

Custom

LengthX

Gages

12.

Class X GagesC

usto

m L

engt

hX

Gag

es

❑ Centerless lapped to a 5 microfinish❑ Up to 6” long❑ NIST Traceable❑ Stabilized and heat treated to 60-62 RC❑ Plus, Minus or Bilateral tolerance

Reversible pin gages in English andMetric up to 6” lengths. Ideal for deepand hard to reach holes or slots.

OVERALL LENGTH: 3 inchesInch Size Millimeter Size Price

.0100” to .0299” .254mm to .761mm $ 103.93

.0300” to .0599” .762mm to 1.52mm 55.90

.0600” to .2009” 1.53mm to 5.10mm 38.08

.2010” to .3749” 5.11mm to 9.52mm 40.05

.3750” to .6349” 9.53mm to 16.12mm 42.69

.6350” to .7500” 16.13mm to 19.05mm 42.69

.7501” to .8750” 19.06mm to 22.22mm 74.94

.8751” to 1.000” 22.23mm to 25.40mm 84.03


.0100” to .0299” .254mm to .761mm $ 258.85

.0300” to .0599” .762mm to 1.52mm 138.82

.0600” to .2009” 1.53mm to 5.10mm 71.87

.2010” to .3749” 5.11mm to 9.52mm 73.71

.3750” to .6349” 9.53mm to 16.12mm 77.40

.6350” to .7500” 16.13mm to 19.05mm 83.54

.7501” to .8750” 19.06mm to 22.22mm 133.05

.8751” to 1.000” 22.23mm to 25.40mm 152.95


.0100” to .0299” .254mm to .761mm $ 334.95

.0300” to .0599” .762mm to 1.52mm 186.54

.0600” to .2009” 1.53mm to 5.10mm 82.25

.2010” to .3749” 5.11mm to 9.52mm 83.48

.3750” to .6349” 9.53mm to 16.12mm 84.77

.6350” to .7500” 16.13mm to 19.05mm 92.14

.7501” to .8750” 19.06mm to 22.22mm 165.48

.8751” to .9375” 22.23mm to 23.81mm 187.10

.9376” to 1.000” 23.82mm to 25.40mm 211.43


.0100” to .0299” .254mm to .761mm $ 142.08

.0300” to .0599” .762mm to 1.52mm 76.17

.0600” to .2009” 1.53mm to 5.10mm 52.22

.2010” to .3749” 5.11mm to 9.52mm 53.19

.3750” to .6349” 9.53mm to 16.12mm 56.39

.6350” to .7500” 16.13mm to 19.05mm 58.04

.7501” to .8750” 19.06mm to 22.22mm 100.24

.8751” to 1.000” 22.23mm to 25.40mm 110.20

Custom Lengths

13.

.005 to .0105 $5.30

.011 to .0605 $2.41

.061 to .5005 $2.14

.501 to .6255 $2.94

.626 to .7505 $4.28

.751 to .8325 $6.42

.833 to .9165 $7.35

.917 to 1.0005 $7.61

English Individual Class Z Gage Pins*Replace missing pins! Don’t live with broken sets.We stock these replacement pins in evenhalf thousand sizes for immediate shipment. All pins over .060” are laser marked with sizeand direction of tolerance. But we don’t stop there, we’ve also added a serial numberlasered onto each piece for traceability.

*IMPORTANT: Specify PLUS or MINUS whenordering individual members.

Metric Individual Class Z Gage Pins*Replace missing pins! Don’t live with broken sets.We stock these replacement pinsin all sizes for immediate shipment. All pins over 1.51mm are laser marked with sizeand direction of tolerance. But we don’t stop there, we’ve also added a serial numberlasered on to each piece for traceability.

.22 to 1.51 $2.941.52 to 12.71 $2.6812.72 to 15.31 $3.3715.32 to 17.81 $5.3017.82 to 20.37 $6.3720.38 to 22.05 $7.4422.06 to 23.73 $8.3523.74 to 25.41 $9.40

*IMPORTANT: Specify PLUS or MINUS whenordering individual members.

What's the Big Deal about Laser Marking?Our computer based, non-contact, thermal process produces a permanent medical grade mark on our gages. Through computermonitoring the mark is carefully controlled to give consistentmaterialpenetration. This method gives superior quality control com-pared to other marking systems and traceability by serial number. All pins over .060” are marked with size and direction of tolerance.

NEW!

NEW!

14.

CLASS X Individual Gage Pins*

.0110 to .0759” $12.34

.0760 to .5009” 9.98

.5010 to .7499” 14.18

.7500 to 1.000” 17.59

These pins have the same features as our Class Z pins but with a .00004 tolerance limitand a .00002 roundness limit. They are great for your inspection needs or when you wantto maximize your GO/NOGO tolerance limit. They’re also a great way to calibrate measur-ing equipment, micrometers and calipers. We make all sizes for your special needs. Allpins over .060” or 1.51 mm are laser marked with size and direction of tolerance. We’vealso added a serial number lasered onto each piece for traceability.

English

Metric

.28 to 1.90mm $12.341.91 to 12.70mm 9.9812.71 to 19.02mm 14.1819.03 to 25.40mm 17.59

*Please Specify PLUS or MINUS.

Also Available CLASS X BILATERAL (split tolerance)add 25% to above prices.

NewCLASS XX Individual Gage Pins*

.0110 to .0759” $24.68

.0760 to .5009” 19.96

.5010 to .7499” 28.36

.7500 to 1.000” 35.18

When an even tighter tolerance is needed, Meyer Gage now makes XX pin gages.With a tolerance of .00002 and a roundness limit of .00001, it’s our tightest tolerance yetfor your most critical inspection needs. They’re our best gages to calibrate your measuringequipment, micrometers and calipers. All pins over .060” or 1.51mm are laser marked withsize and direction of tolerance. We’ve also added the serial number for traceability.

English

Metric

.28 to 1.90mm $24.681.91 to 12.70mm 19.9612.71 to 19.02mm 28.3619.03 to 25.40mm 35.18

*Please Specify PLUS or MINUS.

15.

ENGLISH GO/NOGO GAGESClass XX GO

Class Z Class Z Class X Class X GO Class XX Assembly Diameter GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGORange Assembly Assembly Assembly Assembly Assembly Assembly

.011” - .075” $12.34 $ 8.14 $32.29 $17.85 $164.58 $35.70

.076” - .180” 12.23 7.88 28.09 15.75 56.18 31.50

.181” - .281” 13.13 8.66 28.35 16.01 56.70 32.02

.282” - .406” 13.39 8.93 29.14 16.54 58.28 33.08

.407” - .500” 15.49 10.76 31.24 17.85 62.48 35.70

.501” - .510” 16.80 11.03 39.64 22.05 79.28 44.10

.511” - .625” 20.48 13.65 43.31 25.20 86.62 50.40

.626” - .635” 23.26 15.23 43.31 25.20 86.62 50.40

.636” - .750” 24.57 16.28 44.63 26.25 89.26 52.50

.751” - .760” 28.77 18.38 51.45 29.66 102.90 59.32

.761” - .832” 35.18 23.63 57.17 34.39 114.34 68.78

.833” - .916” 36.23 24.68 57.17 34.39 114.34 68.78

.917” -1.000” 37.01 25.73 57.17 34.39 114.34 68.78

One complete GO/NOGO gage includes: one Plus member (GO), one Minus member (NOGO), one Double End Handle with Bushings assembled.GO gage includes: one Plus member with Single End Handle and Bushing assembled.NOGO gage includes: one Minus member with Single End Handle and Bushing assembled.GO/NOGO gages are available with special diameter or length gages, prices on request.Gage Handles marked with size and direction of tolerance. *Additional markings $0.15 per character.

English GO/NOGOGage Assemblies

Use these GO/NOGOassemblies for in-processinspection on the shop floor.Detect out of tolerancesbefore your customer does.Available in English Class Z,Class X and Class XX.

GO

/NO

GO

Gages&

Access.

16.

GO

/NO

GO

Gag

es&

Acc

ess.

Metric GO/NOGOGage Assemblies

One complete GO/NOGO gage includes: one Plus member (GO), one Minus member (NOGO), one Double End Handle with Bushings assembled.GO gage includes: one Plus member with Single End Handle and Bushing assembled.NOGO gage includes: one Minus member with Single End Handle and Bushing assembled.GO/NOGO gages are available with special diameter or length gages, prices on request.Gage Handles marked with size and direction of tolerance. *Additional markings $0.15 per character.

METRIC GO/NOGO GAGESClass Z GO Class XX GO

Diameter Class Z Assembly Class X Class X GO Class XX AssemblyRange GO/NOGO or NOGO GO/NOGO or NOGO GO/NOGO or NOGO(mm) Assembly Assembly Assembly Assembly Assembly Assembly

.22 -1.90 $13.39 $8.40 $32.29 $17.85 $164.58 $35.70

1.91 - 4.56 13.39 8.40 28.09 15.75 56.18 31.50

4.57 - 7.14 13.65 8.66 28.35 16.01 56.70 32.02

7.15 - 10.32 14.44 9.19 29.14 16.54 58.28 33.08

10.33 - 12.70 16.54 10.50 31.24 17.85 62.48 35.70

12.71 - 12.96 17.90 11.18 39.64 22.05 79.28 44.10

12.97 - 15.30 21.58 14.33 43.31 25.20 86.62 50.40

15.31 - 16.20 25.36 16.22 43.31 25.20 86.62 50.40

16.21 - 19.30 28.77 17.27 44.63 26.25 89.26 52.50

19.31 - 20.36 34.49 23.05 51.45 29.69 102.90 59.38

20.37 - 22.04 36.59 24.10 57.17 34.39 114.34 68.78

22.05 - 23.72 38.69 25.15 57.17 34.39 114.34 68.78

23.73 - 25.41 40.79 26.20 57.17 34.39 114.34 68.78

Use the GO/NOGO assemblies forin-process inspection on the shopfloor. Detect out of tolerancesbefore your customer does.Available in Metric Class Z,Class X and Class XX.

17.

Bushings

Gage HandlesPlug Gage Double End Single EndDiameter (mm) Handle # Price Handle # Price

.005"-.075" (.22 -1.90) 1 W D.E. $3.94 1 W S.E. $3.68

.076"-.180" (1.91- 4.56) 2 W D.E. 4.46 2 W S.E. 3.94

.181"-.281" (4.57-7.14) 3 W D.E. 4.73 3 W S.E. 4.20

.282"-.406" (7.15 -10.32) 4 W D.E. 5.51 4 W S.E. 4.73

.407"-.510" (10.33 -12.96) 5 W D.E. 7.61 5 W S.E. 6.04

.511"-.635" (12.97-16.12) 6 W D.E. 9.71 6 W S.E. 8.40

.636"-.760" (16.13-19.30) 7 W D.E. 11.03 7 W S.E. 9.45

.761"-1.010" (19.31-25.65) 8 W D.E. 16.75 8 W S.E. 14.18

1W010 thru 5W510....................$1.84 each6W532 thru 8W1.00...................$2.63 each

MATERIAL1W thru 5W..........................................................BRASS6W thru 8W...................................................ALUMINUM

English Wire type, Cylindrical Gage BushingsRange

Bushing # Above Thru

1W010 .005 .010

1W015 .010 .015

1W020 .015 .020

1W025 .020 .025

1W030 .025 .030

1W035 .030 .035

1W040 .035 .040

1W045 .040 .045

1W050 .045 .050

1W055 .050 .055

1W060 .055 .060

1W065 .060 .065

1W070 .065 .070

1W075 .070 .075

2W082 .075 .082

2W089 .082 .089

2W096 .089 .096

2W103 .096 .103

2W110 .103 .110

2W117 .110 .117

2W124 .117 .124

2W131 .124 .131

2W138 .131 .138

2W145 .138 .145

2W152 .145 .152

2W159 .152 .159

2W166 .159 .166

2W173 .166 .173

RangeBushing # Above Thru

2W180 .173 .180

3W188 .180 .188

3W196 .188 .196

3W204 .196 .204

3W212 .204 .212

3W220 .212 .220

3W228 .220 .228

3W236 .228 .236

3W244 .236 .244

3W252 .244 .252

3W261 .252 .261

3W271 .261 .271

3W281 .271 .281

4W291 .281 .291

4W301 .291 .301

4W311 .301 .311

4W321 .311 .321

4W331 .321 .331

4W341 .331 .341

4W351 .341 .351

4W361 .351 .361

4W371 .361 .371

4W382 .371 .382

4W394 .382 .394

4W406 .394 .406

5W420 .406 .420

5W435 .420 .435

5W450 .435 .450

RangeBushing # Above Thru

5W465 .450 .465

5W480 .465 .480

5W495 .480 .495

5W510 .495 .510

6W532 .510 .532

6W547 .532 .547

6W563 .547 .563

6W579 .563 .579

6W594 .579 .594

6W610 .594 .610

6W625 .610 .625

6W635 .625 .635

7W656 .635 .656

7W672 .656 .672

7W688 .672 .688

7W704 .688 .704

7W719 .704 .719

7W735 .719 .735

7W750 .735 .750

7W760 .750 .760

8W781 .760 .781

8W812 .781 .812

8W843 .812 .843

8W875 .843 .875

8W906 .875 .906

8W937 .906 .937

8W968 .937 .968

8W1.000 .968 1.010

GO

/NO

GO

Gages&

Access.

Gage Accessories

Handles furnished without bushings. Bushings sold separately.Custom Engraving available at $0.15 per character.

18.

Durable Poly Cases Poly Inserts Gage Storage Accessories

Poly Case for M-O Set.................................................$15.00 eachPoly Case for M-1 thru M-8 Set...................................$30.00 eachPoly Case and insert for M-O Set............................... $30.00 eachPoly Case with insert for M-1 thru M-8 sets................ $60.00 eachEach hole size marked on insert.

Poly Insert for M-0 set...........................$15.00 eachPoly Insert for M-1 thru M-8 sets..........$30.00 each

Each hole size marked on insert.


GO

/NO

GO

Gag

es&

Acc

ess.

HeavyDuty MetalStorageCabinets

Taperlocks*Steel & Chrome

*Quick changeover!The members pop out for quick replacement.Excellent choice for larger diameter inspection.

19.

Taperlocks - Steel and ChromeUnilateral Tolerances • GO = PLUS tolerance, NOGO = MINUS toleranceChrome Plates - Add 30% For XXX - Add 100% to XX prices.

Size Range Std. GO Member Only ` Std. NOGO Member Only HandleClass Length 1 2-4 5-10 Length 1 2-4 5-10 No. Price

XX $46.81 $41.58 $36.41 $42.19 $37.57 $35.20 .105 " to .150" X 3/8 " 39.88 36.41 31.79 7/32 " 36.41 32.62 30.91

2.67mm to 3.81mm Y 9.5mm 35.42 32.34 28.33 5.6mm 32.34 29.15 27.17 00 $7.72Z 31.19 28.33 25.41 29.15 26.51 24.86

XX 44.50 39.88 35.20 40.15 36.41 33.17.150" to .230 " X 13/32 " 37.90 34.10 30.64 9/32 " 36.41 32.34 30.64

3.81mm to 5.84mm Y 10.3mm 34.65 31.19 27.72 7.1mm 31.74 29.15 26.84 0 7.72Z 28.33 26.02 23.71 27.17 24.86 22.99

XX 46.20 41.03 36.41 42.19 37.57 34.43.230 " to .365 " X 3/4 " 38.72 35.81 31.19 5/16 " 36.41 32.34 30.64

5.84mm to 9.27mm Y 19.1mm 35.81 32.34 28.88 7.9mm 32.34 29.76 27.72 1 6.62Z 29.48 27.17 24.26 27.72 25.41 23.65

XX 47.96 42.19 38.12 43.89 38.72 35.70.365 " to .510 " X 1 " 40.43 36.96 32.95 3/8 " 37.57 33.22 31.79

9.27mm to 12.95mm Y 25.4mm 36.96 33.50 30.03 9.5mm 33.50 30.64 28.88 2 6.62Z 30.64 27.72 24.86 28.88 26.18 24.26

XX 49.67 43.89 39.88 45.65 40.15 36.69.510 " to .825 " X 1 1/4 " 42.15 38.12 33.50 1/2 " 38.72 35.20 32.62

12.95mm to 20.96mm Y 31.8mm 38.12 34.10 31.19 12.7mm 34.65 34.46 30.31 3 6.62Z 32.34 28.88 25.41 30.36 27.17 25.41

XX 57.20 50.82 45.65 51.43 45.65 41.86.825 " to 1.135 " X 1 1/2 " 46.20 42.19 36.41 5/8 " 42.19 38.72 35.37

20.96mm to 28.83mm Y 38.1mm 39.88 37.57 32.34 15.9mm 36.69 35.42 30.91 4 7.72Z 35.81 32.34 28.33 32.95 30.31 27.72

XX 60.06 53.13 45.38 53.74 48.24 44.281.135 " to 1.510 " X 1 5/8" 54.89 49.12 42.74 3/4 " 49.67 45.05 41.03

28.83mm to 38.35mm Y 41.3mm 45.05 41.58 36.41 19.1mm 41.03 36.96 34.10 5 8.82Z 38.12 35.20 30.64 36.41 32.23 30.25

*Taperlocks are not returnable for credit or cancellation.

TaperlocksSteel &

Chrom

e

❑ NIST traceable❑ Plus, Minus or

Bilateral tolerances❑ Class XX, X, Y or Z.❑ Steel or Chrome

Trilocks*Steel& Chrome*Got really big inspection jobs? These are yourbest choice for large diameters. Made to order, thisis only a partial listing of what we offer. Call us forprice and delivery on larger sizes.

20.

Trilo

cks

Stee

l & C

hrom

e

Trilocks - Steel and ChromeUnilateral Tolerances • GO = PLUS tolerance, NOGO = MINUS toleranceChrome Plates - Add 30% For XXX - Add 100% to XX prices up to 1.510" only.

Size Range Std. GO Member Only ` Std. NOGO Member Only HandleClass Length 1 2-4 5-10 Length 1 2-4 5-10 No. Price

XX $54.89 $45.82 $43.59 $49.67 $43.89 $39.88.760 " to .947 " X 1 1/4 " 46.48 41.42 37.90 3/4 " 42.74 37.95 35.20

19.30mm to 24.05mm Y 31.8mm 39.88 35.70 33.17 19.1mm 36.69 32.89 30.31 2 1/2 $11.03Z 33.17 30.31 28.27 31.19 28.44 26.46

XX 55.72 49.01 44.61 50.22 44.61 39.88.947 " to 1.135 " X 1 3/8 " 47.74 42.41 39.11 3/4 " 43.67 38.89 35.70

24.05mm to 28.83mm Y 34.9mm 40.98 36.69 33.50 19.1mm 37.51 33.77 30.91 3 1/2 11.60Z 35.37 31.90 29.37 33.17 30.03 27.72

XX 59.84 52.53 47.74 53.68 47.91 43.621.135 " to 1.510 " X 1 1/2 " 52.20 46.48 42.02 3/4 " 47.63 42.13 38.72

28.83mm to 38.25mm Y 38.1mm 43.29 38.67 35.42 19.1mm 39.49 35.42 32.34 4 1/2 12.71Z 36.69 32.89 30.31 34.05 30.58 28.33

XX 88.50 79.48 67.38 80.19 71.94 62.101.510 " to 2.010 " X 1 7/8 " 74.80 65.84 57.37 7/8 " 65.23 59.90 52.58

38.25mm to 51.05mm Y 47.6mm 67.21 60.28 52.53 22.2mm 58.61 53.90 47.80 5 1/2 13.81Z 54.78 49.34 43.89 51.26 45.93 41.47

XX 106.26 93.23 79.59 96.69 86.90 75.082.010 " to 2.510 " X 2 " 88.50 78.32 67.49 7/8 " 80.19 71.94 62.10

51.05mm to 63.75mm Y 50.8mm 78.32 69.08 60.06 22.2mm 68.48 62.76 54.78 6 14.33Z 65.84 58.91 51.37 58.30 52.53 49.12

XX 120.58 104.72 91.03 105.99 96.47 82.502.510" to 3.010 " X 2 " 102.80 90.09 77.06 1 " 85.97 80.85 69.80

63.75mm to 76.45mm Y 50.8mm 88.50 78.32 65.84 25.4mm 77.06 71.94 62.10 7 15.44Z 73.32 64.96 56.71 66.39 58.91 51.26

XX 147.24 129.20 110.11 126.94 117.10 99.943.010 " to 3.510 " X 2" 112.59 108.35 92.68 1 " 104.78 98.67 85.36

76.45mm to 89.15mm Y 50.8mm 105.11 92.68 80.85 25.4mm 91.74 86.63 75.57 7 15.44Z 90.09 80.85 70.13 78.98 72.00 62.37

*Trilocks are not returnable for credit or cancellation.

Ring*

GagesThe Meyer Difference.❑ The Material. We use only superb quality steels

such as 06 or Alloy Steels such as 8620 and HeatTreat our blanks to a minimum of 58RC.

❑ The Stabilization Process. Subsequent grindingoperations can introduce heat and stress. Meyer puts all blanks through a stabilization process,cycling them through temperature extremes from -130˚F to +300˚F.

❑ The Precision Lapping Process. “Lapping” is the finishing process that removes small amounts of material from the gage surface and brings it within its final tolerance limits.

❑ Inspection with NIST - traceable gages. In ourMetrology area conditions are a strict, cool 68˚Fwhere the relative humidity is between 30- 50% and allof our masters are traceable to NIST.

Chrome Ring Gages .125" - 4.010" (3.18 mm - 101.85 mm)

Size Range

Inches Milimeters Class XX Class X Class Y Class Z

Above to and Above to and In Quantities of: In Quantities of: In Quantities of: In Quantities of:

including including 1 2 3-5 1 2 3-5 1 2 3-5 1 2

.125 - .150 3.18 - 3.81 $124.69 $109.60 $102.05 $112.88 $100.40 $92.20 $104.01 $91.55 $85.31 $100.08 $87.61

.150 - .185 3.81 - 4.69 124.69 112.21 102.05 112.88 100.40 92.20 104.01 91.55 85.31 100.08 87.61

.185 - .230 4.69 - 5.84 121.40 106.64 99.09 109.59 96.46 89.58 101.39 88.92 83.34 97.13 85.31

.230 - .365 5.84 - 9.27 124.69 109.59 102.05 112.88 100.40 92.20 104.01 91.55 85.31 100.08 87.61

.365 - .510 9.27 - 12.95 130.92 115.83 107.63 120.75 105.99 99.09 111.56 98.44 91.55 108.94 95.81

.510 - .825 12.95 - 20.96 147.33 130.26 121.40 132.89 117.14 108.94 123.38 108.28 100.74 117.80 104.01

.825 - 1.135 20.96 - 28.83 164.06 144.70 134.53 148.96 130.92 122.06 137.15 120.75 112.21 131.58 115.83

1.135 - 1.510 28.83 - 38.35 183.42 161.11 150.28 165.38 146.01 135.84 152.90 134.53 125.34 146.01 128.95

1.510 - 2.010 38.35 - 51.05 223.13 197.20 183.42 202.45 177.84 165.38 186.05 164.06 152.90 179.15 157.17

2.010 - 2.510 51.05 - 63.75 266.11 234.28 219.19 241.17 212.30 197.20 221.81 195.56 181.78 213.61 187.36

2.510 - 3.010 63.75 - 76.45 310.08 273.00 253.64 279.89 246.75 228.70 259.21 227.39 212.30 248.06 217.88

3.010 - 3.510 76.45 - 89.15 360.94 316.96 294.99 325.16 286.78 267.42 292.03 264.46 246.75 288.09 253.64

3.510 - 4.010 89.15 - 101.85 431.49 378.99 359.63 390.14 343.21 319.59 359.63 316.96 294.99 344.53 303.19

❑ MASTER: bilateral (split) tolerance. ❑ GO: unilateral (one way) minus tolerance. ❑ NOGO: unilateral (one way) plus tolerance.Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TAPER of all gages will not exceed50% of applicable gagemaker's size tolerance and are nonaccumulative.

*Ring gages are not returnable for credit or cancellation.

21.

RingG

ages

Ring

Gag

es

Steel Ring Gages .040" - 4.010" (1.02 mm - 101.85 mm)

Size Range




.040 - .070 1.02 - 1.78 $127.89 $114.66 $108.05 $114.39 $102.92 $96.92 $111.52 $100.33 $94.59 $105.79 $95.15

.070 - .100 1.78 - 2.54 111.35 101.21 95.48 100.88 90.85 86.00 98.29 88.86 84.01 93.44 84.57

.100 - .125 2.54 - 3.18 99.23 89.47 84.57 90.85 82.25 77.67 87.15 78.83 74.87 82.86 75.14

.125 - .150 3.18 - 3.81 87.98 79.72 75.41 80.54 73.10 69.46 77.40 70.23 66.81 73.98 67.37

.150 - .185 3.81 - 4.70 87.98 79.72 75.41 79.99 72.54 68.80 77.12 70.23 66.49 73.87 67.37

.185 - .240 4.70 - 6.10 86.55 78.28 74.26 79.99 72.54 68.80 76.24 69.35 65.66 72.77 66.20

.240 - .365 6.10 - 9.27 87.98 79.72 75.41 80.54 73.10 69.35 76.79 70.23 66.49 73.98 67.37

.365 - .510 9.27 - 12.95 98.02 88.59 83.69 89.47 80.82 76.51 86.00 77.95 73.65 81.97 74.26

.510 - .825 12.95 - 20.96 106.40 95.75 90.30 97.19 87.71 82.86 93.17 84.28 79.72 88.54 80.26

.825 - 1.135 20.96 - 28.83 116.37 104.63 98.62 105.18 94.87 89.47 101.77 91.73 86.54 96.58 87.15

1.135 - 1.510 28.83 - 38.35 128.11 114.93 108.38 116.37 104.63 98.62 111.52 100.33 94.59 106.06 95.48

1.510 - 2.010 38.35 - 51.05 151.65 135.61 127.56 137.32 122.99 115.76 131.59 118.14 111.25 125.02 112.07

2.010 - 2.510 51.01 - 63.75 178.28 159.10 149.33 159.98 143.05 134.45 154.25 137.87 129.55 146.19 130.70

2.510 - 3.010 63.75 - 76.45 203.25 181.15 170.01 182.57 162.84 153.08 176.57 157.66 147.90 166.26 148.51

3.010 - 3.510 76.45 - 89.15 245.97 218.74 204.96 218.41 194.38 182.30 211.85 188.64 176.84 200.38 178.61

3.510 - 4.010 89.15 - 101.85 279.21 247.96 232.19 247.67 220.17 206.39 239.90 213.28 200.11 226.45 201.01

❑ MASTER: bilateral (split) tolerance. ❑ GO: unilateral (one way) minus tolerance. ❑ NOGO: unilateral (one way) plus tolerance.Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TAPER of all gages will not exceed 50% of applicable gagemaker's sizetolerance and are nonaccumulative.

TungstenCarbideRingGages .040"- 2.510" (1.02mm-63.75mm)

Size Range




.040 - .070 1.02 - 1.78 $157.66 $140.73 $132.42 $139.73 $130.98 $123.26 $136.71 $122.38 $115.22 $129.55 $116.10

.070 - .125 1.78 - 3.18 139.91 125.24 117.80 124.31 116.64 109.81 121.50 108.93 102.65 115.22 103.47

.125 - .150 3.18 - 3.81 124.70 111.79 105.18 110.99 104.35 98.34 108.65 103.19 97.73 103.19 92.88

.150 - .240 3.81 - 6.10 128.11 114.88 108.05 114.02 107.22 101.16 111.79 100.33 94.87 106.06 95.48

.240 - .365 6.10 - 9.27 132.74 118.97 112.95 119.12 110.91 104.35 115.54 103.80 97.73 109.48 98.46

.365 - .510 9.27 - 12.95 152.81 136.44 128.45 135.56 127.28 119.85 132.74 118.97 111.79 125.58 112.68

.510 - .665 12.95 - 16.89 182.03 162.18 152.20 160.64 150.77 141.61 157.93 141.02 132.74 149.06 133.30

.665 - .825 16.89 - 20.96 190.90 170.01 159.64 168.49 157.93 148.51 165.10 147.19 138.47 156.17 139.58

.825 - .980 20.96 - 24.89 253.13 224.74 210.69 222.42 208.37 195.48 217.85 193.77 181.74 205.84 183.18

.980 - 1.135 24.89 - 28.83 272.87 242.22 226.73 239.36 224.14 210.41 234.78 208.71 195.48 221.88 197.24

1.135 - 1.355 28.83 - 33.91 289.35 257.71 241.06 254.49 238.48 223.31 249.66 221.82 207.83 235.61 209.53

1.355- 1.510 33.91 - 38.35 332.41 294.70 275.74 291.10 272.59 255.12 285.22 253.13 237.04 269.45 238.97

1.510 - 1.760 38.35 - 44.70 420.22 371.76 347.73 367.13 343.71 321.32 360.02 318.79 298.39 339.69 300.35

1.760 - 2.010 44.70 - 51.05 485.00 428.82 400.76 423.15 396.13 369.34 415.10 367.47 343.43 391.56 346.85

2.010 - 2.260 51.05 - 57.40 558.09 493.04 409.91 435.67 455.50 425.40 476.99 421.65 394.15 450.04 398.17

2.260 - 2.510 57.40 - 63.75 618.62 550.76 510.24 538.78 504.23 470.99 528.59 467.24 436.59 498.23 440.56

❑ ALL RINGS tungsten carbide inserts with steel jackets. ❑ MASTER: bilateral (split) tolerance. ❑ GO: unilateral (one way) minus tolerance. ❑ NOGO: unilateral(one way) plus tolerance. Ring Gages are manufactured in accordance with ANSI spec B89.1.6 - 1989. ROUNDNESS and TAPER of all gages will not exceed 50% of applicable gagemaker's size tolerance and are nonaccumulative. ❑ SIZES ABOVE AND BELOW THOSE LISTED will be quoted on request.

22.

23.

When you need to check partsquickly, Progressive plug gagesare the best choice. Both theGO and NOGO diameters arestepped on a single gage mem-ber. All members are securelyattached to either a trilock ortaperlock handle. All handlesare marked with sizes anddirection of tolerance.

❑ Class XX, X, Y, or Z❑ NIST traceable❑ GO, NOGO tolerances❑ Tool Steel 60/62 Rockwell C❑ Certificate of Accuracy

included❑ Additional marking available

$0.15 per character

Unilateral Tolerance, GO - Plus Tolerance, NOGO - Minus Tolerance, Chrome Plates - Add 30%

AGD Progressive Member Quantities HandleTolerance Member GO NOGO

Size – Range Class Inches Length Portion Portion 1 2-4 5-10 No. PriceTAPERLOCK XX .00002 83.32 77.28 73.65

STYLE X .00004 23/32 in. 3/8 in. 7/32 in. 67.62 64.00 60.38 00 $7.72.105 in. to .150 in. Y .00007 18.3 mm 9.5 mm 5.6 mm 57.96 53.13 50.722.67 mm to 3.81 mm Z .00010 48.30 45.89 43.47

XX .00002 76.07 72.45 68.83.1501 in. to .230 in. X .00004 13/16 in. 13/32 in. 9/32 in. 64.00 60.38 57.96 0 $7.723.81 mm to 5.84 mm Y .00007 20.6 mm 10.3 mm 7.1 mm 56.75 51.92 49.51

Z .00010 43.47 41.06 38.64XX .00002 82.11 76.07 72.45

.2301 in. to .365 in. X .00004 13/16 in. 3/4 in. 5/16 in. 66.41 62.79 59.17 1 $6.625.84 mm to 9.27 mm Y .00007 30.2 mm 19.1 mm 7.9 mm 57.96 53.13 50.72

Z .00010 45.89 43.47 41.06XX .00002 86.94 82.11 77.28

.3651 in. to .510 in. X .00004 11/2 in. 1 in. 3/8 in. 70.04 66.41 62.79 2 $6.629.27 mm to 12.95 mm Y .00007 38.1 mm 25.4 mm 9.5 mm 61.58 57.96 55.55

Z .00010 48.30 45.89 43.46XX .00002 90.56 85.73 80.90

.5101 in. to .825 in. X .00004 17/8 in. 11/4 in. 1/2 in. 72.45 68.83 65.21 3 $6.6212.95 mm to 20.96 mm Y .00007 47.6 mm 31.8 mm 12.7 mm 65.21 61.58 57.96

Z .00010 50.72 48.30 45.89XX .00003 106.26 100.22 95.39

.8251 in. to 1.135 in. X .00006 21/8 in. 13/8 in. 5/8 in. 82.11 76.07 72.45 4 $7.7220.96 mm to 28.83 mm Y .00009 54.0 mm 34.9 mm 15.9 mm 67.62 64.00 60.38

Z .00012 59.17 55.55 51.92XX .00003 114.71 108.68 102.64

1.1351 in. to 1.510 in. X .00006 23/8 in. 11/2 in. 3/4 in. 102.64 96.60 87.40 5 $8.8228.83 mm to 38.35 mm Y .00009 60.3 mm 38.1 mm 19.1 mm 82.11 76.07 72.45

Z .00012 68.83 65.21 61.58TRILOCK XX .00004 170.26 161.81 152.15

STYLE X .00008 27/8 in. 17/8 in. 7/8 in. 136.45 128.00 121.96 51/2 $13.811.5101 in. to 2.010 in. Y .00012 73.0 mm 47.6 mm 22.2 mm 119.55 113.51 107.4738.35 mm to 51.05 mm Z .00016 96.60 91.77 86.94

XX .00004 213.73 201.65 192.002.0101 in. to 2.510 in. X .00008 3 in. 2 in. 7/8 in. 172.67 164.22 154.56 6 $14.3351.05 mm to 63.75 mm Y .00012 76.2 mm 50.8 mm 22.2 mm 146.11 138.86 131.62

Z .00016 120.75 114.71 108.68XX .00005 232.30 230.63 218.56

2.5101 in. to 3.010 in. X .00010 3 in. 2 in. 7/8 in. 199.24 189.58 178.71 7 $15.4463.75 mm to 76.45 mm Y .00015 76.2 mm 50.8 mm 22.2 mm 171.47 163.01 153.35

Z .00020 141.28 134.03 125.58XX .00005 288.59 272.90 256.61

3.0101 in. to 3.510 in. X .00010 3 in. 2 in. 7/8 in. 222.18 211.31 199.24 7 $15.4476.45 mm to 89.15 mm Y .00015 76.2 mm 50.8 mm 22.2 mm 198.03 188.37 177.50

Z .00020 165.43 156.98 148.52XX .00005 335.69 302.45 300.67


Z .00020 195.62 185.96 175.09XX .00005 380.36 362.25 342.93


Z .00020 218.56 207.69 195.62

*Progressives are not returnable for credit or cancellation.

Custom Progressive Gages*

24.

Master Setting Discs* You can use these Master Discs to calibrate your measuringequipment. They are a must for your calibration lab and yourinspection areas. Meyer’s Master Discs are available in threestyles and come with a Certificate of Accuracy.

❑ Class XX, X or Y❑ GO, NOGO, Bilateral tolerances available❑ Steel 60/62 Rockwell C❑ Comes complete with end grips❑ All inch masters are furnished with black insulators❑ All metric masters are furnished with yellow insulators❑ Red and Green insulators are available on special order❑ Roundness is within half of tolerance

*Note: For the range above 1.510” to and including 8.510”A.G.D. standards for style #2 calll for style #3 master discsseparated by an A.G.D. separator plate and linked togetherwith a tie rod and insulators.

STYLE #1 – Bilateral (Split) toleranceSTYLE #2 – Unilateral (GO plus NOGO minus)STYLE #3 – Bilateral (Split) tolerance

Tolerance Style #1 Style #2 Style #3Size – Range Class Inches Lgth. Steel Chrome Lgth. Steel Chrome Lgth. Steel Chrome

XX .00002 80.90 103.85 136.45 177.50 73.66 96.60.150 in. to .230 in. X .00004 7/8 in. 60.38 78.49 7/8 in. 101.43 132.83 7/16 in. 55.55 71.243.81 mm to 5.84 mm Y .00007 22.2 mm 49.51 71.24 22.2 mm 90.56 118.34 11.1 mm 50.72 66.41

XX .00002 83.32 108.68 137.66 184.75 74.87 97.81.2301 in. to .365 in. X .00004 1 in. 61.58 80.90 1 in. 102.64 135.24 1/2 in. 56.75 73.665.84 mm to 9.27 mm Y .00007 25.4 mm 56.75 73.66 25.4 mm 91.77 119.54 12.7 mm 51.92 68.83



XX .00003 90.56 118.34 156.98 202.86 85.73 112.30.8251 in. to 1.135 in. X .00006 13/8 in. 68.83 90.56 13/8 in. 117.13 152.15 11/16 in. 64.00 83.3220.96 mm to 28.83 mm Y .00009 34.9 mm 67.62 89.36 34.9 mm 114.71 148.52 17.5 mm 60.38 78.49

XX .00003 99.02 129.20 171.47 223.39 91.77 119.541.1351 in. to 1.510 in. X .00006 15/8 in. 73.66 96.60 15/8 in. 129.20 169.05 13/16 in. 67.62 88.1528.83 mm to 38.35 mm Y .00009 41.3 mm 68.83 90.56 41.3 mm 114.71 148.52 20.6 mm 61.58 78.49

XX .00004 114.71 148.52 194.41 252.37 103.85 136.451.5101 in. to 2.010 in. X .00008 17/8 in. 85.73 112.30 2 in. 144.90 189.58 7/8 in. 78.49 102.6438.35 mm to 51.05 mm Y .00012 47.6 mm 73.66 96.60 50.8 mm 131.62 170.26 22.2 mm 68.83 90.56

XX .00004 131.62 170.26 228.22 297.05 123.17 161.812.0101 in. to 2.510 in. X .00008 2 in. 96.60 128.58 2 in. 169.05 219.77 7/8 in. 92.98 120.7551.05 mm to 63.75 mm Y .00012 50.8 mm 88.15 112.30 50.8 mm 146.11 190.79 22.2 mm 78.49 102.64

XX .00005 152.15 198.03 263.24 342.93 138.86 179.922.5101 in. to 3.010 in. X .00010 2 in. 118.34 153.35 21/4 in. 195.62 253.58 1 in. 102.64 135.2463.75 mm to 76.45 mm Y .00015 50.8 mm 99.02 129.20 57.2 mm 167.84 218.56 25.4 mm 89.36 115.92

XX .00005 170.26 222.18 310.33 403.31 161.81 211.313.0101 in. to 3.510 in. X .00010 2 in. 129.20 169.05 21/4 in. 233.05 301.87 1 in. 121.96 159.3976.45 mm to 89.15 mm Y .00015 50.8 mm 114.71 148.52 57.2 mm 201.65 263.24 25.4 mm 101.43 132.83

XX .00005 199.24 260.82 332.06 432.29 170.26 222.183.5101 in. to 4.010 in. X .00010 21/8 in. 148.52 194.41 21/4 in. 263.24 342.94 1 in. 138.86 179.9289.15 mm to 101.85 mm Y .00015 54.0 mm 129.20 169.05 57.2 mm 224.60 293.42 25.4 mm 118.34 153.35


XX .000065 224.60 293.42 363.46 472.13 187.16 243.924.5101 in. to 5.010 in. X .00013 2in. 170.26 222.18 21/4 in. 287.39 373.12 1 in. 147.32 191.99114.55 mm to 127.25 mm Y .00019 54.0 mm 148.52 194.41 57.2 mm 254.78 332.06 25.4 mm 135.24 175.09



Anything over above size - call for pricing.

*Master Discs are not returnable for credit or cancellation.

25.

Meyer Gage now has acomplete line ofGO/NOGO Hex PlugGages manufactured tospecs ANSI/ASMEB107.17M and ANSIB18.3. Hex gages areperfect for inspectingmachine head fasteners.All Hex gage assembliesare marked with thesize.

❑ All Hex Gages areClass Z tolerance

❑ Made of steel❑ Heat treated to 60/62

Rockwell C❑ All prices include a

GO/NOGO andhandle

❑ NIST traceable❑ Additional marking

available for $0.15per character

❑ Certificate ofAccuracy included

Fractional SizesD.E. Hex Gages to ANSI B18.3

Size Price Size Price0.028 $312.74 7/32” $223.390.035 294.63 1/4” 223.390.05 255.99 5/16” 234.261/16” 255.99 3/8” 243.925/64” 255.99 7/16” 243.923/32” 255.99 1/2” 243.927/64” 255.99 9/16” 266.861/8” 223.39 5/8” 266.869/64” 223.39 3/4” 277.735/32” 223.39 7/8” 305.503/16” 223.39 1” 332.06

Metric SizesD.E. Hex Gages to ANSI B18.3

Size Price Size Price0.70 mm $312.74 6.00 mm $223.390.90 mm 294.63 8.00 mm 223.391.30 mm 255.99 10.00 mm 234.261.50 mm 255.99 12.00 mm 243.922.00 mm 255.99 14.00 mm 243.922.50 mm 255.99 17.00 mm 266.863.00 mm 223.39 19.00 mm 277.734.00 mm 223.39 22.00 mm 305.505.00 mm 223.39 24.00 mm 332.06

Fractional SizesD.E. Hex Gages to ANSI/ASME B107.17M

Size Price Size Price1/8” $222.18 15/16” $323.615/32” 222.18 13/8” 356.213/16” 222.18 17/16” 392.4413/64” 222.18 11/2” 398.487/32” 222.18 19/16” 398.4815/64” 222.18 15/8” 398.481/4” 222.18 111/16” 398.489/32” 233.05 13/4” 398.485/16” 233.05 113/16” 460.0611/32” 233.05 17/8” 460.063/8” 233.05 115/16” 460.067/16” 233.05 2” 460.061/2” 233.05 21/16” 460.069/16” 233.05 21/8” 460.0619/32” 233.05 23/16” 493.875/8” 241.50 21/4” 493.87

21/32” 241.50 25/16” 493.8711/16” 241.50 23/8” 493.873/4” 241.50 27/16” 519.23

25/32” 268.07 21/2” 519.2313/16” 268.07 29/16” 519.237/8” 268.07 25/8” 519.23

15/16” 268.07 211/16” 519.231” 268.07 23/4” 597.71

11/16” 294.63 213/16” 597.7111/8” 294.63 27/8” 597.7113/16” 294.63 215/16” 597.7111/4” 294.63 3” 601.34

Metric SizesD.E. Hex Gages to ANSI/ASME B107.17M

Size Price Size Price2 mm $255.99 28 mm $294.633 mm 255.99 29 mm 294.63

3.2 mm 222.18 30 mm 294.634 mm 222.18 31 mm 294.635 mm 222.18 32 mm 323.61

5.5 mm 222.18 33 mm 323.616 mm 222.18 34 mm 356.21

6.3 mm 222.18 35 mm 356.217 mm 233.05 36 mm 392.448 mm 233.05 37 mm 398.489 mm 233.05 38 mm 398.4810 mm 233.05 39 mm 398.4811 mm 233.05 40 mm 398.4812 mm 233.05 41 mm 398.4813 mm 233.05 42 mm 398.4814 mm 233.05 43 mm 398.4815 mm 233.05 44 mm 458.8516 mm 241.50 45 mm 458.8517 mm 241.50 46 mm 458.8518 mm 241.50 47 mm 458.8519 mm 268.07 48 mm 458.8520 mm 268.07 49 mm 458.8521 mm 268.07 50 mm 458.8522 mm 268.07 55 mm 493.8723 mm 268.07 60 mm 493.8724 mm 268.07 65 mm 519.2325 mm 268.07 70 mm 597.7126 mm 294.63 75 mm 597.7127 mm 294.63

HexGages*

*Hex Gages are not returnable for credit or cancellation.

26.

60º ThreadMeasuring Wires

60° Threads(G) (G)

(n) Nominal (n) NominalThreads Best (C) Price Threads Best (C) Price

per Wire Nominal (Set of per Wire Nominal (Set ofInch Diameter Constant Three) Inch Diameter Constant Three)120 .00481” .00722” $90.00 16 .03608” .05413” $55.00100 .00577 .00866 90.00 14 .04124 .06186 55.0096 .00601 .00902 90.00 13 .04441 .06662 55.0090 .00642 .00962 90.00 12 .04811 .07217 55.0080 .00722 .01083 90.00 11 1/2 .05020 .07531 55.0072 .00802 .01203 90.00 11 .05249 .07873 55.0064 .00902 .01353 90.00 10 .05774 .08660 55.0056 .01031 .01546 90.00 9 .06415 .09623 55.0050 .01155 .01732 90.00 8 .07217 .10825 55.0048 .01203 .01804 55.00 7 1/2 .07698 .11547 55.0044 .01312 .01968 55.00 7 .08248 .12372 55.0040 .01443 .02165 55.00 6 .09623 .14434 55.0036 .01604 .02406 55.00 5 1/2 .10497 .15746 90.0032 .01804 .02706 55.00 5 .11547 .17321 90.0030 .01925 .02887 55.00 4 1/2 .12830 .19245 90.0028 .02062 .03093 55.00 4 .14434 .21651 90.0027 .02138 .03208 55.00 3 1/2 .16496 .24744 90.0026 .02221 .03331 55.00 3 1/4 .17765 .26647 90.0024 .02406 .03608 55.00 3 .19245 .28868 90.0022 .02624 .03936 55.00 2 3/4 .20995 .31492 90.0020 .02887 .04330 55.00 2 1/2 .23094 .34641 90.0018 .03208 .04811 55.00 2 .28868 .43301 90.00

29° Acme Best ThreadsThreads Diameter Price

per Best (Set Inch Size of (n) Wire Three)

1 .51645” $103.751 1/3 .38734 103.751 1/2 .34430 103.751 3/4 .29511 103.752 .25823 103.752 1/2 .20658 103.753 .17215 103.753 1/2 .14756 82.504 .12911 82.504 1/2 .11477 82.505 .10329 82.505 1/2 .09390 82.506 .08608 82.507 .07378 82.508 .06456 82.509 .05738 82.5010 .05164 82.5012 .04304 82.5014 .03689 82.5016 .03228 .82.5018 .02869 82.5020 .02582 82.50

Meyer Gage Thread MeasuringWires together with a micrometer,are used to quickly & accuratelymeasure pitch diameters of exter-nal threads. They are perfect forcalibrating or checking wearthreads plug gages, and are usedto monitor and control pitch diame-ters manufactured threads. Atolerance of +/- .00001” of theexact size of the wires and within+/- .00002 of the best wirediameter (G) as specified forGrade A Wires.

❑ 100% inspection❑ 2 microfinish or better❑ Tool Steel❑ All members 2” long❑ Meets former federal

Specification GGG-W-366bfor Grade A Master ThreadWires

60° Metric ThreadsNominal Price

Best Wire Nominal (Set Pitch Diameter Constant ofmm mm mm Three)

.2 .1155 .1732 $90.00.225 .1299 .1949 90.00.25 .1443 .2165 90.00.3 .1732 .2598 90.00

.35 .2021 .3031 90.00.4 .2309 .3464 90.00

.45 .2598 .3897 90.00.5 .2887 .4330 90.00.6 .3464 .5196 90.00.7 .4041 .6062 90.00

.75 .4330 .6495 55.00.8 .4619 .6928 55.00.9 .5196 .7794 55.00

1.0 .5774 .8660 55.001.25 .7217 1.0825 55.001.5 .8660 1.2990 55.00

1.75 1.0104 1.5155 55.002.0 1.1547 1.7321 55.002.5 1.4434 2.1651 55.003.0 1.7321 2.5981 55.003.5 2.0207 3.0311 55.004.0 2.3094 3.4641 55.004.5 2.5981 3.8971 55.005.0 2.8868 4.3301 90.005.5 3.1754 4.7631 90.006.0 3.4641 5.1962 90.007.0 4.0415 6.0622 90.008.0 4.6188 6.9282 90.009.0 5.1962 7.7942 90.00

10.0 5.7735 8.6603 90.00

Thread Measuring Wire Sets60 Degree ThreadMeasuring Wires PriceSet No. 30 HS* $1,821.0030 Sizes (5 to 80 TPI) withwood caseSet No. 34 HS* $2,163.0034 Sizes (4 to 80 TPI) withwood caseSet No. 20 HS* $1,171.0020 Sizes (6 to 36 TPI) withwood case

60 Degree Metric ThreadMeasuring WiresSet No. 30M $2,245.0030 Sizes (.2 pitch to 10 pitch)with wood caseSet No. 23M $1,621.0023 Sizes (.3 pitch to 6 pitch)with wood case

*7-1/2 & 22 TPI not included in these sets.**Not all sizes available.

Certificate of Class /Conformance (short form)Furnished FREE with all ordersfrom Meyer Gage

Certificate of Calibration (long form)Furnished with readings that are 5 decimal places to the right of the decimal point. These readingsinclude 3 measurements per gageperformed at the center and 1/16”in from the edge of the radius atboth ends of the gage. Serialnumbers are recorded on gagepins over .060”. Included is a tam-per proof sticker with papercertificate.

Long form Calibration Price ListNew Gages Used Gages*

Class ZZ or Z Pin Sets $ 1.25 per pin $ 2.00 per pin

Class ZZ or Z individual pins $ 2.00 per pin $ 2.00 per pin

Class X or XX Pin Sets $10.00 per pin $15.00 per pin

Class X or XX individual pins $15.00 per pin $25.00 per pin

Trilocks (all classes) $25.00 per gage $30.00 per gage

Taper Locks (all classes) $25.00 per gage $30.00 per gage

Ring Gages (all classes) $25.00 per gage $30.00 per gage

Special Lengths Class ZZ $ 2.00 per gage $ 2.00 per gage

Special Length Class X $15.00 per gage $25.00 per gage

* RMA number required on all used gages sent in for calibration. Please contact our Customer Service Department for authorization.

Certifications:

27.

Documents

Meyer Catalog