Micro-USB connectors meeting USB 2.0 Standard · 2019. 10. 13. · 3 ZX Series Micro-USB connectors meeting requirements of USB 2.0 Standard Configurations Mating side configuration

12014.8w

Micro-USB connectors meeting USB 2.0 StandardZX Series

■Overview Extremely small highly reliable connectors complying with

physical, electrical and environmental requirements of Micro-USB standard (USB 2.0).

Receptacles and plugs are available in a wide variety of mounting and termination styles, allowing their use in various applications.

■Features 1. Size reduction Compared with the standard Mini-USB connectors, the

size of ZX connectors is reduced by approximately 60% while still allowing a high-speed data transfer of 480 Mbps, specified in USB 2.0.

2. Receptacle styles Two interface configurations: Micro-B and Micro-AB in

standard, mid-mount and reverse mounting styles. SMT and through-hole (shell) PC board terminations.

3. Plug styles Corresponding to the receptacle styles, two interface

configurations: Micro-A and Micro-B, with direct wire or PCB wire soldering.

Several plug styles can be used for data transmission, earphone or charging applications.

4. Smooth mating and unmating A smooth mating and unmating operation results in less

wear and a longer product life. The unique Hirose active latch mechanism produces a rel iable and durable connector. Even after repeated use, the user will experience a smooth click sensation when mating the connectors. Note: The statement above only applies when using both

plug and receptacles made by Hirose Electric.

5. Hirose was the first company to obtain a Micro-USB certification (TID number).

Note: Contact us to ascertain whether a TID number has

been acquired for an individual product.

Reverse(Top mount)Drop-in

(Mid-mount)

Standard(Bottom mount)

USB 2.0 Hi-Speed (480 Mbps)

Eye diagram measurement results: Measured with 2.4 m long USB 2.0 cable

500ps/div

200

mV

/div

TP2

Fig.1

Fig.2

Fig.3

2

ZX Series●Micro-USB connectors meeting requirements of USB 2.0 Standard

■Ordering information

ZX 62 RD - B - 5 P * 8q

q

q

w

w

w

e

r

r

r

t y u o

o

t y u i

ZX 40 - B - 5 S * - UNIT

ZX 40 - B - SLDA

●Receptacles

●Plugs

■Specifications

Ratings Current rating

1 A (per contact) or

1.8 A (contacts No. 1 and 5) and

0.5 A (contacts No. 2, 3, and 4)

Voltage rating 30 V AC

Operating temperature range -30°C to +85 °C (Note1)

Storage temperature range -30 °C to +60°C

Item Specification Conditions

1. Contact resistance 30 mø max. 100 mA

2. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute

3. Capacitance 2 pF max. Between adjacent contacts at 1,000 Hz (AC voltage)

4. Durability Contact resistance: Rise from initial value of 10 mø max. 10,000 cycles

5. Total insertion/removal force Insertion force: 35 N max., Removal force: 8 N min. Mated with corresponding connector

Note1: Includes temperature rise caused by current flow.Note2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications

for a specific part number shown.

■Materials●Receptacles

Part Material Finish Remarks

Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0

Contacts Copper alloy Selective gold plated ---------------

Shell Stainless steel Tin alloy plating ---------------

●PlugsPart Material Finish Remarks

Insulator LCP Micro-B: Black, Micro-AB: Gray UL94V-0

Contacts Copper alloy Selective gold plated ---------------

Shell Stainless steel Tin alloy plating ---------------

qSeries name ZX

wTermination style 10's: Right-angle PCB wire, SMT

20's: Straight, PCB wire

40's: Direct wire

60's: Right-angle, PCB wire

80's: Cradle SMT

eBoard mounting style Blank

(Receptacles) D

R

RD

M

Standard (Bottom mount)

Standard (Bottom mount) through hole

Reverse (Top mount)

Reverse (Top mount) through hole

Drop-in (Mid-mount)

rMating side configuration A

B

AB

Micro-A

Micro-B

Micro-AB

tNumber of contacts 5

yContact type P

S

Receptacle- Male

Plug – Female

uSerial No.

iShell termination style – Blank

Receptacles 8

SMT

Through hole (solder tab length: 0.8mm)

oComponents-plugs UNIT Assembly (Insulator/contact/lock)

Cover (Note 1)

Note 1: Classifiers such as A, B, and C are entered for *.Micro-A

Micro-B

Micro-AB

Interface Receptacle Plug

3


■ConfigurationsMating side

configurationType Part No. 3D Image Page

Re

ce

pt

ac

le

s

Micro-B

Standard

SMT ZX62-B-5PA(11) 4

SMT

+

DIP

ZX62D-B-5PA8 4

Reverse SMT ZX62R-B-5P 5

Drop-in SMT ZX62M-B-5P(01) 5

Micro-AB

Standard

SMT ZX62-AB-5PA(11) 6

SMT

+

DIP

ZX62D-AB-5P8 6

Reverse

SMT ZX62R-AB-5P 7

SMT

+

DIP

ZX62RD-AB-5P8 7

Pl

ug

s Micro-B

Direct wire soldering

Assembly (insulator/contacts/lock)

:ZX40-B-5S-UNIT(12)

Cover-top :ZX40-B-SLDA Cover-bottom :ZX40-SLDB

9 and 10

PCB wire soldering

(straight, through hole)

Assembly

(insulator/contacts/lock) :ZX20-B-5S-UNIT

Cover :ZX20-B-SLDC

11

PCB wire soldering

(SMT)

Assembly

(insulator/contacts/lock) :ZX64-B-5S-UNIT(14)

Cover-top :ZX64-B-SLDA Cover- bottom :ZX64-SLDB

12 and 13

PCB wire soldering

(SMT)

Assembly

(insulator/contacts/lock) :ZX64-B-5S-UNIT(14)

Cover :ZX64-B-SLDC

12 and 14

Micro-A Direct wire soldering

Assembly

(insulator/contacts/lock) :ZX40-A-5S-UNIT

Cover-top :ZX40-A-SLDA Cover- bottom :ZX40-SLDB

15 and 16

Cr

ad

le

s

Micro-B

SMT

+

DIP

ZX80-B-5S With lock 17

ZX80-B-5SA Without lock 17

Note: 1. Part numbers in the Plugs section of the above table list the Assembly (insulator/contacts/locks) and the corresponding Shields/Covers.Note: 2. Optional Printed Circuit boards for the Plugs are shown for reference only. Not supplied with applicable connectors.Note: 3. The color of the insulators body in the Assembly (insulator/contacts/lock) shown in the 3D Image column above is blue for clarity. Refer to

the Materials (Page 2) for correct colors.

4


■Receptacles●Micro B - Standard (Bottom mount), Shell SMT

No.57.9 2.15

7.5

2.5

0.6 5

2.8

No.1

PCB EDGE

NO CONDUCTIVE

TRACES

0.5

4.3

6.2

9.8

1.6

No.5

1.4

53

.35

1.9

1.3

50.4

1.32.6

4.1

8.3

No.1

BRecommended PCB mounting pattern

●Micro B - Standard (Bottom mount), Shell through holeAll dimensions: mm

4.852.6

0.65

1.2

5(L

AN

D)

2.9

0.8

5(T

H)

0.2

NO CONDUCTIVE TRACES

R0.325(TH)

R0.325(TH)0.5

1.3 1.9

2.7

53

.35

1.5

(TH

)

4.15.27.29.4

PCB EDGE

0.5(TH)

R0.3(TH)

0.1

R0.525(LAND)

1.05(LAND)

0.4 0.65(TH)

1.3

5

No.5

R0.5(LAND)

No.1

No.1 No.57.2

2.5

0.8

7.5

4.85

0.6 5

2.15 2.9


All dimensions: mm

Part No. HRS No. Packaging

ZX62-B-5PA(11) 242-0033-8 11 3,500 pcs/reel


ZX62D-B-5PA8 242-0056-3 2,000 pcs/reel

5


PCB EDGE

No.1No.5

0.4

R0.4

3.6

2.4

4.3

6.9

2.6

1.3

7.8

12

8.8

1.9

7.1

5

5.1

5

2.4

1.4

1.0

5

1.5

4.7

2

C0.3

No.5No.1

4.8

4.7

0.25

1.3

2.6

7.5

11.5

7.5

0.6

1.2

51

.23

2.7

4

4.3

5

5.3

1.9BRecommended PCB mounting pattern

No.5


1.3

5

2

1.3

4.1

8.3

1.9

2.9

0.4

3

3.3

5

No.1

1.4

5

2.6

0.4

5.6

9.8

3.9

6.6

0.5No.5 No.1

7.5

8.8

2.5

2.15

0.6 5


■Receptacles●Micro B - Reverse (Top mount) Shell SMT

●Micro B - Drop-in (Mid-mount), Shell SMTAll dimensions: mm

All dimensions: mm


ZX62R-B-5P 242-0028-8 2,000 pcs/reel


ZX62M-B-5P(01) 242-0024-7 01 1,500 pcs/reel

6


No.1 No.5

0.5

1.3

1.9

1.4

5

3.3

5

1.3

5

2.6

0.4

6.2

9.8

4.3

1.6

8.3

4.1

PCB EDGE

8.8 No.5No.1

7.5

2.5 2.8

2.15

50.6



■Receptacles●Micro AB - Standard (Bottom mount), Shell SMT

0.6

8.35

7.5

2.5

No.5No.1

4.45

0.6

2.025 3.125

5

2.8

1.3

1.7

1.5

0.65(TH)1.05(LAND)

R0.45(LAND)

R0.25(TH)

0.4

2.64.45

1.3

5

1.9

3.4

75

2.6

25

4.15.2

(0.5)

(0.325)

9.4

0.5

1.5

(TH

)

R0.3(TH)

R0.5(LAND)

7.35(TH)

9(TH)

1.3

0.8

5(T

H)

1.2

5(L

AN

D)

3.1

25

No.5No.1

PCB EDGE



●Micro AB - Standard (Bottom mount), Shell through hole All dimensions: mm

All dimensions: mm


ZX62-AB-5PA(11) 242-0045-7 11 3,500 pcs/reel


ZX62D-AB-5P8 242-0027-5 2,000 pcs/reel

7


2.9

4-R0.4

4.18.3

4.750.85

0.4

3

1.4

52.61.3

1.3

5

0.4

0.5

1.6

9.86.6

3.3

5

1.9

NO CONDUCTIVE TRACESNo.5 No.1

PCB EDGE

No.5 No.1

0.6 5

2.158.8

2.5

7.5


■Receptacles●Micro AB - Reverse (Top mount), Shell SMT

All dimensions: mm

0.6

PCB EDGE


9.4

No.5R0.25(TH)

No.1

9(TH)7.35(TH)

6.64.452.61.3

0.4

1.05(LAND)

R0.2MAX

R0.45(LAND)

0.65(TH)

1.3

5

1.5

1.7

3.4

75

R0.5(LAND)

2.6

251.9

1.5

(TH

)

1.30.85

2.9

4.75

(0.5)

(0.325)R0.3(TH)

3.1

25

0.5

55

1.2

5(L

AN

D)

0.8

5(T

H)

8.35

2.5

7.5 No.1No.5

4.45

50.6

2.025 3.125


●Micro AB - Reverse (Top mount), Shell through hole

All dimensions: mm


ZX62R-AB-5P 242-0035-3 2,000 pcs/reel


ZX62RD-AB-5P8 242-0025-0 2,000 pcs/reel

8


Plugs – assembled (not-terminated, without overmold) Components

ZX40-SLDB

ZX40-*-SLDACover-top

ZX40-*-5S-UNITAssembly (insulator/contacts/lock)*No PCB required

Cover-bottom

Cover

ZX20-*-SLDC

Assembly(insulator/contacts/lock)* Vertical through hole PCB

termination

ZX20-*-5S-UNIT

ZX20 - PCB wire soldering

Cover-bottom

ZX64-SLDB

Cover-top

Assembly (insulator/contacts/lock)* Right angle through hole

PCB termination

ZX64-*-5S-UNIT

ZX64-*-SLDA

ZX64 - PCB wire soldering

ZX40 - Direct wire soldering

9


●Micro B - Component, Cover-top - Direct wire soldering

22

.6

1.8

8

6.85

■Plugs●Micro B - Assembly (insulator/contacts/lock) – Direct wire soldering

14

.1

7.9

No.1No.5

4.2

All dimensions: mm

All dimensions: mm


ZX40-B-5S-UNIT(12) 242-0002-4 12 4,000 pcs/reel

Contact HRS for Cable Termination Procedure Manual.


ZX40-B-SLDA 242-0003-7 4,000 pcs/reel

10


■Plugs●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering

16

.2

8

16

.2

8

ZX40-SLDB ZX40-SLDB(3.3)

All dimensions: mm

22

.6

6.85

8.6

4.7

5

1.8

●Assembled

All dimensions: mm

Part No. HRS No. Packaging Cable dia.

ZX40-SLDB 242-0004-04,000 pcs/reel

Ø3.8

ZX40-SLDB(3.3) 242-0023-4 Ø3.3

11


All dimensions: mm

■Plugs●Micro B - Assembly (insulator/contacts/lock) - Vertical through hole PCB wire soldering (non-direct)

All dimensions: mm

1.32.6

5-0.15

1 1.4

12

.2

1.5

5

0.3

5

7.9

No.1No.5

3.9

75

4.2

1.3

2.6

8.2

1.2

(Th

rou

gh

ho

le)

0.6(Through hole)

1.5

5

10.25

5-Ø

0.7

(Thro

ugh h

ole

)

5-Ø1.1(Land)

R0.3

(Thro

ugh h

ole

)

1(Land)

1.6

(La

nd

)

R0.5

(Land)

No.1 No.5

PCB mounting pattern*PCB required (not supplied)

Max. thickness: 0.6mm

●Micro B - Component, Cover - through hole

4.4

8.4

2-0.2

8.2

2.6

1.3

12.2

1.5

5

1.8

0.3

5

0.6

1 1.4

6.85

5-0.15

Assembly(insulator/contacts/lock) Cover

●Assembled


ZX20-B-SLDC 242-0022-1 4,000 pcs/reel


ZX20-B-5S-UNIT 242-0012-8 00 4,000 pcs/pks


1.1

8.2

2-0.2

0.6

8

6.85

1.8

12

.1

12


16

.1

1.3

2.6

5-0.15

3.7

7.9No.1No.5

■Plugs●Micro B - Assembly (insulator/contacts/lock) - Right angle SMT

All dimensions: mm

No.1No.5

1.3

2.6

6.8

0.5

1.1

1.5

6

0.35

PCB mounting pattern*PCB required (not supplied)

Max. thickness: 1.0mm

●Micro B - Component, Cover-top – Right angle SMT

24

.7

6.85

8

1.8

All dimensions: mm


ZX64-B-SLDA 242-0013-0 4,000 pcs/reel


ZX64-B-5S-UNIT(14) 242-0009-3 14 1 piece


13


24.7

4.1

8.46.85

1.8

Assembly(insulator/contacts/lock) Cover-top

Cover-bottom

●Assembled

■Plugs●Micro B - Component, Cover-bottom - Right angle SMT

18.2

5

8

All dimensions: mm


ZX64-SLDB 242-0049-8 4,000 pcs/reel

16.1

6.85

8.4

4.1

1.8


Cover-bottom

●Assembled

All dimensions: mm

6.85

8

1.8

16.1

●Micro B - Component, Shell/cover – Right angle SMT

Shell/cover, without cable clamp

This shell/cover does not require ZX64-SLDB.


ZX64-B-SLDC 242-0018-4 4,000 pcs/reel

14


22

.6

8

1.8

6.85

●Micro A - Component, Cover-top - Direct wire soldering

All dimensions: mm

■Plugs●Micro A - Assembly (insulator/contacts/lock) - Direct wire soldering

12

.4

7.9

4.2

No.1No.5

Contacts

Insulator body (color grey)

All dimensions: mm


ZX40-A-SLDA 242-0011-5 4,000 pcs/reel


ZX40-A-5S-UNIT 242-0010-2 1 piece


15


4.7

5

22

.6

6.85

8.6

1.8


Cover-bottom

●Assembled

■Plugs●Micro A, Micro B - Component, Cover-bottom - Direct wire soldering

16

.2

8

16

.2

8

ZX40-SLDB ZX40-SLDB(3.3)All dimensions: mm

All dimensions: mm

Part No. HRS No. Packaging Cable dia.

ZX40-SLDB 242-0004-04,000 pcs/reel

Ø3.8

ZX40-SLDB(3.3) 242-0023-4 Ø3.3

16


8-R0.25

Contact No.5Contact No.1

2-Ø2.2(Hole)

16.55

0.3

7

8-R0.5

5

3.1

5

1.3

(Th

rou

gh

ho

le)

1.9

(La

nd

)

1.1(Land)

0.5(Through hole)

1.8

6

1.32.66.65

1.6

(Th

rou

gh

ho

le)

0.5(Through hole)0.4

2.9

2.2

1.1(Land)

2.2

(La

nd

)

●Micro B, without lock

6.85

No.5No.1

2-0.26.65

1.32.6

5-0.15

1.8

8

2.7

82

.42

0.3

72

.32

3.5

2

16.5520.55

2.57.1

13 1.15

1.8

6

3.1

5

0.7

1

R1.6

8.55

BPCB mounting pattern

■Plug-Vertical, cradle mount, Shell through hole●Micro B, with lock

6.85

No.1No.5

2-0.26.65

1.32.6

5-0.15

1.8

8

2.7

82

.42

0.3

72

.32

3.5

2

16.5520.55

2.57.1

13 1.15

1.8

6

3.1

5

0.7

1

R1.6

8.55

All dimensions: mm

All dimensions: mm


ZX80-B-5S 242-0017-1 100 pcs/pks


ZX80-B-5SA 242-0019-7 100 pcs/pks

17


BPrecautions1. Exercise care when handling the connectors. Do not subject them to excessive external forces when mating/un-mating.2. Mate and un-mate as intended, holding by the overmolded body, in the correct direction. Do not un-mate by pulling on the cable.3. Some tooling marks may be visible on the surfaces of receptacle (shell/cover). No form/fit or function is affected.4. Appearance of the surface finishes on the receptacles may vary between production runs. No affect on form, fit or function.

BRecommended Temperature Profile - Receptacles

●Using lead-free solder paste

(ç)

250 240ç 230çmin

180ç

150ç

200

150

10060S 30S

50

The temperature profile is based on the left conditions.In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Contact your solder paste and equipment manufacturer for specific recommendations.

Note 1: Up to 2 cycles of Reflow soldering are possib le under the same condi t ions, provided that there is a return to normal temperature between the first and second cycle.

Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals.

BPackaging Specifications

C

A

B1.

75 2

4 0.5

Ø1.5

Unreeling direction

●Embossed carrier tape dimensions

E

Ø13

Ø380

D

Unreeling direction

Part No. A dimension B dimension

ZX62-B-5PA(11) 24 11.5

ZX62-AB-5PA(11) 24 11.5

ZX62M-B-5P(01) 24 11.5

Other 16 7.5

Part No. D dimension E dimension

ZX62-B-5PA(11) 30.4 24.4

ZX62-AB-5PA(11) 30.4 24.4

ZX62M-B-5P(01) 30.4 24.4

Other 22.4 16.4

●Reel Dimensions

18


MEMO :

19


20


USA:HIROSE ELECTRIC (U.S.A.), INC. San Jose Office3255 Scott Boulevard, Building 7, Suite 101 Santa Clara, CA 95054Phone : +1-408-253-9640Fax : +1-408-253-9641http://www.hiroseusa.com

USA:HIROSE ELECTRIC (U.S.A.), INC. Headquarters2688 Westhills Court, Simi Valley, CA 93065-6235Phone : +1-805-522-7958Fax : +1-805-522-3217http://www.hiroseusa.com

HONG KONG:HIROSE ELECTRIC HONGKONG TRADING CO., LTD.Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong KongPhone : +852-2803-5338 Fax : +852-2591-6560http://www.hirose-hongkong.com.hk

CHINA:HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCHA1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025Phone : +86-10-5165-9332Fax : +86-10-5908-1381http://www.hirose-china.com.cn

TAIWAN:HIROSE ELECTRIC TAIWAN CO., LTD.103 8F, No.87, Zhengzhou Rd., TaipeiPhone : +886-2-2555-7377Fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw

GERMANY:HIROSE ELECTRIC EUROPE B.V. German BranchHerzog-Carl-Strasse 4 D-73760 Ostfildern(Scharnhauser Park)Phone : +49-711-4560-02-1Fax : +49-711-4560-02-299http://www.hirose.de

GERMANY:HIROSE ELECTRIC EUROPE B.V. Nuernberg OfficeMuggenhofer Str. 136 90429 NuernbergPhone : +49-911 32 68 89 63Fax : +49-911 32 68 89 69http://www.hirose.de

INDIA:HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison officeUnit No.03, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 560066 Karnataka, IndiaPhone : +91-80-4120 1907Fax : +91-80-4120 9908http://www.hirose-singapore.com.sg

SINGAPORE:HIROSE ELECTRIC SINGAPORE PTE. LTD.10 Anson Road #26-1, International Plaza 079903, SingaporePhone : +65-6324-6113 Fax : +65-6324-6123http://www.hirose-singapore.com.sg

THE NETHERLANDS:HIROSE ELECTRIC EUROPE B.V.Hogehillweg #8 1101 CC Amsterdam Z-OPhone : +31-20-6557460 Fax : +31-20-6557469http://www.hiroseeurope.com

UNITED KINGDOM:Hirose Electric Europe BV (UK Branch)4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NHPhone : +44-1908 202050Fax : +44-1908 202058

USA:HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)37677 Professional Center Drive, Suite #100C Livonia, MI 48154Phone : +1-734-542-9963Fax : +1-734-542-9964 http://www.hiroseusa.com

CHINA:HIROSE ELECTRIC (SHANGHAI) CO., LTD.1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001Phone : +86-21-6391-3355Fax : +86-21-6391-3335 http://www.hirose-china.com.cn

CHINA:HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008Phone : +86-755-8207-0851Fax : +86-755-8207-0873http://www.hirose-china.com.cn

KOREA:HIROSE KOREA CO., LTD.1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450Phone : +82-31-496-7000,7124Fax : +82-31-496-7100http://www.hirose.co.kr

INDIA:HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison OfficeSuite No. 606 5th Floor SB Tower 1A/1 Sector 16 A Filmcity Noida 201301 Uttar Pradesh-IndiaPhone : +91-120-4804917Fax : +91-120-4804949http://www.hirose.com/sg/

MALAYSIA:HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office)1-10-07, Suntech @ Penang Cybercity (1164),Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.Phone : +604-619-2564 Fax : +604-619-2574http://www.hirose.com/sg/

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPANTEL: +81-45-620-3526 Fax: +81-45-591-3726http://www.hirose.comhttp://www.hirose-connectors.com

®

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.The contents of this catalog are current as of date of 08/2014. Contents are subject to change without notice for the purpose of improvements.

Documents

Micro-USB connectors meeting USB 2.0 Standard · 2019. 10. 13. · 3 ZX Series Micro-USB connectors meeting requirements of USB 2.0 Standard Configurations Mating side configuration