Upload
phamdan
View
225
Download
0
Embed Size (px)
Citation preview
Types of audits with Evaluation of Microbiological control
• Contract manufacture
• Contract microbiology laboratory
• Excipient manufacturer
• Active ingredient manufacturer
• Combination of any of the above
• Internal manufacture or laboratory
Quality Systems Inspection
Quality system
Production system
Laboratory controls system
Materials system
Packaging and labeling system
Facilities and equipment system
Risk by route of administration
Low
HighParenteral
Tablet, Capsule
Ophthalmic
Liquid-filled capsules
Wound topicals
Topical ointment
Inhaled - MDI
Inhaled - DPI
Intranasal solution
Topical cream
Nebulizer solution
Otic
Oral solutions, suspensions
Lab tests risk from impact of results
High
Low
Sterility Test
Bacterial endotoxin test
Antimicrobial Preservatives Effectiveness Test
Biological assays
Microbial enumeration and Specified microorganisms tests
Microbial identification
Media growth promotion
Materials risk of contamination
High
Low
Animal or plant origin (e.g. lactose)
Synthetic origin (e.g. povidone)
Mineral origin (e.g. Talc)
Mineral origin (e.g. dyes, aromatics)
Semi-synthetic origin (e.g. captisol, HPM)
Unprocessed
Highly processed
Some bioburden reductionprocessing
ClassificationManufacturing process
Origin and Growth
• Water (H2O)
• Nutrition (CHO, CHON, CHOOH, minerals, etc.)
• Presence or absence of components of air
Microbial Origin and Survival
• moderate to extreme environments
• solid to liquid
• dense to dilute
• atmosphere, humans and other living organisms (animals - vegetation), water, soil
ControlHow to manipulate the environment
• Understand microbial growth limitations
• Determine how to reduce or eliminatemicrobial growth
• Understand dynamics of environment and microbiological growth / survival
Understand Thoroughly?
Do you have the appropriate background and experience for microbiological investigation?
If you do not, then partner with a Microbiologist
How does Risk fit Inspection decisions?
• High risk – on-site inspection mandatory
• Moderate risk – questionnaire assessment or on-site inspection
• Low risk – questionnaire
Process flow chart
Release of raw materials
Fermentation
Centrifugation
Chromatography
Bulk substance
Filtration
Final packaged product
Excipients Water
Micronization
Separation
Drying
HydrationWater
Sterile filtration
Filling
and
Process analysis
Details of Process with Controls
• HACCP plan
• Perform a virtual HACCP analysis using tour, procedures and assessment survey
• Amount of detail depends on level of risk
Audit Findings Template
• Same document format as Lead auditor
Or
• Modified document for notes during audit
For efficiency and clarity.
• Agreed on format with Lead auditor
Objectives
I perform an audit with these intended goals:
1. Determine quality systems in place for microbiological control
2. Determine level of knowledge and capabilities of audited site
3. Determine if continuous improvement is part of culture
Objectives (cont.)
4. Determine if culture matches ours
5. Share knowledge and perspective with client where adds value
6. Develop a relationship based on respect, shared learning, communications
Right People Participants
To ensure that adequate and timely information is generated during an audit
Questions should be directed to the Microbiologist who has accountability and responsibility, and possibly to their staff
Additionally, communicate with operators, or validation scientists, if appropriate
(e.g. for sterile operations)
Success or Failure
The results from an audit depend on the accuracy of information
A non-microbiologist should have effective access to someone who is educated in pharmaceutical microbiology
Criteria to Consider for Manufacturing Audits
Excipient control – C of A, specs, QC testing, material storage, weighing
Process flow –containment, gowningProcess equipment – validation, cleaning,
sterilization, microbial monitoringProcess areas – cleaning, sanitization, access
control, gowning, gloves, microbial monitoring, ‘classification’ qualification
Source of water, water system control and monitoring
Criteria to Consider for Manufacturing Audits
Formulation – excipient and component handling, bulk material handling, in-process sampling, hold time qualifications
Dosage dependent manufacture controls (e.g. mixing, drying, milling, compaction)
Finish/fill operations – sampling, cleaning, operator technique/intervention, controls (e.g. filtration, sterilization, closure control), process qualification
Finished product QC testing, stability testing
Criteria to Consider for Laboratory Audits
Organization and reporting structure
Laboratory layout
Sample tracking, storage
Media control, made or purchased
Supplies, reagents control
Instrument control – calib., PM
Lab and instrument cleaning, disinfection
Criteria to Consider for Laboratory Audits
Lab monitoring
SOPs and their control
Microbial identification process
Exceeded limit or atypical result procedure
Quality improvement program, measures
Proficiency testing
Test methodology
Method suitability procedures