Upload
javadiaz
View
160
Download
8
Tags:
Embed Size (px)
Citation preview
eNodeB LTE V100R006 Local
Commissioning
1
www.huawei.com
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
eNodeB Local
Commissioning
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page1
Contents
1. Commissioning Overview
2. Local Commissioning through the USB Disk
3. Local Commissioning through the LMT
eNodeB LTE V100R006 Local
Commissioning
2
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page2
Introduction to Commissioning
� To ensure that the eNodeB operates normally after the installation
� Commissioning Modes:
� M2000-based Commissioning
� USB+M2000-based Commissioning
� Local Commissioning with LMT
� Commissioning Scenarios:
� Without a Security Gateway
� With a Security Gateway
� Commissioning Prerequisites:
� eNodeB hardware installed and ready
� Transport Network ready (for Remote Commissioning with M2000)
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page3
Scenario Without A Security Gateway
eNodeB LTE V100R006 Local
Commissioning
3
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page4
Scenario With A Security Gateway
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page5
Commissioning Mode – through USB
M2000 Server
M2000 Client
eNodeB
Remote Commissioning with M2000
eNodeB LTE V100R006 Local
Commissioning
4
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page6
Commissioning Mode – through LMT
M2000 Server
LMT
eNodeB
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page7
Contents
1. Commissioning Introduction
2. Local Commissioning through the USB Disk
3. Local Commissioning through the LMT
eNodeB LTE V100R006 Local
Commissioning
5
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page8
Procedure for the Local Commissioning through the USB Disk
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page9
Procedure for the Local Commissioning through the USB Disk
eNodeB LTE V100R006 Local
Commissioning
6
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page10
Prepare for the Local Commissioning through the USB Disk
1. Obtaining a Device Panel Drawing
2. Preparing a USB Flash Drive for eNodeB
3. Preparing Dialing Test Tools
4. Performing Hardware Installation and Power-On Checks
5. Preset a Bar Code Scanner
6. Download a Software Package, Data Configuration Files,
and Deployment Lists
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Obtaining a Device Panel Drawing
Page11
Step1 Obtaining accurate installation information about the
boards and modules of a base station from Huawei
technical support.
eNodeB LTE V100R006 Local
Commissioning
7
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Preparing a USB Flash Drive for eNodeB
Page12
Step1 Choose Start > Programs > iManager M2000 Client > USB
Making and Protection Tool to start the tool.
Step2 Choose Make USB > Path Settings. The Path Settings dialog
box is displayed, as shown in the following figure.
Step3 Set the local save paths for the software and files, NE type, and
working mode based on the types of USB flash drive directories.
Then click OK.
Step4 Select the NE that requires a USB flash drive and deployment
mode.
Step5 Select an encryption algorithm and an integrity protection
algorithm.
Step6 In the Output Path area, specify a save path.
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Preparing a USB Flash Drive for eNodeB
Page13
eNodeB LTE V100R006 Local
Commissioning
8
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Preparing a USB Flash Drive for eNodeB
Page14
Step7 Click Start.
Step8 Click OK in the dialog box displayed after the tool completes the
making of the USB flash drive.
Step9 Optional: If the Local Path option is selected in the Output
Path area, copy the files to the USB flash drive.
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Preparing dialing test tools
Page15
Step1 Obtaining the dialing test tools. It is used to check whether the
base station can perform services correctly. Commonly used
tools are test terminals.
eNodeB LTE V100R006 Local
Commissioning
9
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Performing hardware installation and Power-On Checks
Page16
Step1 Ensure that the base station hardware has been installed and
has passed the installation checks. Different types of base
stations have different hardware installation check procedures.
For details, see Installation Checklist in the installation guide of
the corresponding base station.
Step2 Ensure that the base station has been powered on and has
passed the power-on checks. Different types of base stations
have different power-on check procedures. For details, see
Powering On base station type in the installation guide of the
corresponding base station.
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Preset a Bar Code Scanner
Page17
Step1 Print the electronic operation guide on a piece of A4 paper to
facilitate scanning of presetting codes.
Step2 Connect the bar code scanner to the PC through a USB port.
Step3 Scan the presetting codes printed on the A4 paper.
Step4 Check whether the bar code scanner is preset correctly.
Note: Only when deployment ID is used to bind a base station, we
need to preset a bar code scanner.
eNodeB LTE V100R006 Local
Commissioning
10
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Performing Bar-Code-Based Base Station Binding
Page18
Step1 Connect the scanner to the USB port on the main control
board of the base station.
Step2 Use the scanner to read the deployment ID in the bar code.
Step3 Check whether the scanning is successful. If the scanner
emits a tone and the scanning laser turns off, the scanning is
successful.
Step4 Remove the scanner.
Note: Only when a base station is to be bound with the deployment
ID, we need to performing bar-code-based station binding.
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page19
Download & Activate the Software and Data Configuration FileStep1 Insert the USB disk in USB port on the LMPT/UMPT of the
BBU3900
Step2 eNodeB will automatically upgrade the software and download
the data configuration file, and restart. Then verify that the
loaded software and data configuration files have taken effect.
Step3 Remove the USB flash drive after loading succeeds.
eNodeB LTE V100R006 Local
Commissioning
11
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Download & Activate the Software and Data Configuration File
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Download & Activate the Software and Data Configuration File
eNodeB LTE V100R006 Local
Commissioning
12
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Download & Activate the Software and Data Configuration File
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page23
Performing Service Tests
Step1 Use the UE to visit the WWW server and browse web pages. Perform
this test 20 times. The success rate is higher than 95%, and the user
has no difficulty in browsing.
Step2 Use the UE to visit the FTP server and upload files. Perform this test
10 times. The success rate is higher than 90%, and the upload rates are
stable.
Step3 Use the UE to visit the FTP server and download files. Perform this
test 10 times. The success rate is higher than 90%, and the download
rates are stable.
Step4 Use the test UE to call another UE. Perform this test 20 times. The
access success rate is higher than 95%, calls are not dropped and there
is not obvious noise.
eNodeB LTE V100R006 Local
Commissioning
13
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page24
Performing ESN-based Base Station Binding by localStep1 The local engineer reports the site position and ESN of
each base station to the remote engineer.
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page25
Testing Installation and Deployment Quality
Step1 A local engineer checks that the test area has no
radiation and is safe for testing.
Step2 The local engineer checks that all cells of the base
station have been unblocked.
Step3 The local engineer checks the ports and rectifies the
problems. After the troubleshooting, the local engineer
instructs the remote engineer to resume the commissioning
task.
eNodeB LTE V100R006 Local
Commissioning
14
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page26
Checking Environmental Alarms
Step1 The local engineer performs a loopback test on an alarm port
of the UPEU using a twisted pair. The remote engineer checks
whether the M2000 receives an environmental alarm from the
alarm ports.
Step2 The local engineer stops the loopback test. The remote
engineer checks whether the alarm on the M2000 is cleared.
Step3 Both local and remote engineers repeat the preceding steps
until all eight of the alarm ports on the UPEU pass the tests.
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page27
Remote operations
In M2000 do the procedures for commissioning, including:
� Performing OM channel setup confirmation
� Acquire an NE commissioning verification report
� Confirm that auto deployment tasks are completed
� Setting the maximum output power for RF modules
� Set an NE to the NORMAL mode
eNodeB LTE V100R006 Local
Commissioning
15
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page28
Local and Remote Cooperation
The local and remote cooperation procedures for
commissioning, including:
� Performing ESN-based Base Station Binding
� Testing Installation and Deployment Quality
� Checking Environmental Alarms
� Handling Alarms
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page29
Contents
1. Commissioning Introduction
2. Local Commissioning through the USB Disk
3. Local Commissioning on the LMT
eNodeB LTE V100R006 Local
Commissioning
16
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page30
Procedure for the local eNodeB commissioning on the LMT
Commission the ALD device on the
LMT
Query the running status of the
eNodeB on the LMT
Commission the environment
monitoring equipment on the LMT
Handle the eNodeB alarms on the
LMT
Download the License on the LMT
Start
End
Prepare for the Local eNodeB
Commissioning on the LMT
Upgrade the eNodeB Software and
Data Configuration File on the LMT
Establish the OM link between the
M2000 and the eNodeB
Verify the basic services of the
eNodeB
Same as the operation in
“Remote Commissioning on the
M2000
”Commission the antenna system
on the LMT
Set the maximum TX power of RRU
or RFU
Set the eNodeB status
Compare the license file with the
configuration data of eNodeB
Local operation .
Remote operation
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page31
Prepare for the Local eNodeB Commissioning on the LMT� Arranging for Related Information and Tools Required for
the eNodeB Commissioning on the LMT
� Collect the information related to the eNodeB
� Refer to the operation in “eNodeB LTE Remote Commissioning”
� Arrange for the tools required for the local commissioning on
the LMT
� Laptop
� Ethernet cable for connection to LMPT / UMPT
� Adapter for Local Maintenance for connection to UMPT
eNodeB LTE V100R006 Local
Commissioning
17
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Connecting To eNodeB With LMPT
Page32
1. LMPT 2.Ethernet Cable 3. PC
Default Local OM IP
address:
192.168.0.49
Setting PC IP same
segment, such as:
192.168.0.88
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Connecting To eNodeB With UMPT
Page33
1.UMPT 2.Adapter for Local Maintenance 3. Ethernet cable 4. PC
Default Local OM IP
address:
192.168.0.49
Setting PC IP same
segment, such as:
192.168.0.88
12
4 3
eNodeB LTE V100R006 Local
Commissioning
18
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Login into Web LMT
Page34
Local OM IP address:192.168.0.49
User name: admin
Default password: hwbs@com
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page35
Configure FTP Server Info
� Configuring the FTP Server
Figure1. Software Management tab page
eNodeB LTE V100R006 Local
Commissioning
19
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page36
Configure FTP Server Info
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page37
Upgrade the eNodeB Software and Data Configuration File on the LMT
eNodeB LTE V100R006 Local
Commissioning
20
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Software Storage
Page38
eNodeBSoftware A
eNodeBSoftware B
Main Area Standby Area
Working Standby
Store downloaded softwareActivate
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Software Rollback
� Command:
� RBK SOFTWARE
� Notes: Before implement software rollback, we should
check if there is any valid software for rollback, using the
following command:
Page39
eNodeB LTE V100R006 Local
Commissioning
21
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page40
Download the License on the LMT
� After downloading the commissioning license to the eNodeB
on the LMT, you are authorized to use the eNodeB software
� Procedure
� Run the INS LICENSE command to download and activate the
license file on the eNodeB
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page41
Handle eNodeB Alarms on the LMT
� On the LMT, click the Alarm/Event button. The
Alarm/Event tab page is displayed
� Check for active alarms on the Engineering Alarm tab
page of the Browse Alarm/Event tab page
� Double-click an active alarm. Detailed Information dialog
box is displayed
� Click Solution... to know the detailed information and alarm
handling procedure. Clear the active alarm by following the
alarm handling procedure.
eNodeB LTE V100R006 Local
Commissioning
22
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Query the Running Status
� On the LMT, click the Selftest
button. On the displayed Selftest
tab page, an MML command
script with the complete
parameter settings is
automatically imported to the
command area
� Click the Go button. The test
result is displayed in the area
below the Go button
Page42
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Set the eNodeB Status
Page43
eNodeB LTE V100R006 Local
Commissioning
23
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Local Commissioning with MML
Page44
Start
Remove Default
Configuration Data
Configure Device Data
Configure Transmission
Data
Configure Radio Data
End
Configure global Data
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Remove Default Configuration Data
Page45
eNodeB LTE V100R006 Local
Commissioning
24
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Global Data
Page46
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Global Data
Page47
eNodeB LTE V100R006 Local
Commissioning
25
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page48
Configure Device Data (Procedure)
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Device Data
Page49
eNodeB LTE V100R006 Local
Commissioning
26
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Device Data
Page50
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Device Data
Page51
eNodeB LTE V100R006 Local
Commissioning
27
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure and Commission ALDs
Page52
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Commissioning RET Only
Page53
RET+STMA RET+SBT RET Only
eNodeB LTE V100R006 Local
Commissioning
28
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Commissioning RET and Smart Bias Tee
Page54
RET+STMA RET+SBT RET Only
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Commissioning RET and Smart TMA
Page55
RET+STMA RET+SBT RET Only
eNodeB LTE V100R006 Local
Commissioning
29
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Monitoring Units
Page56
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Time and Synch. Data
Page57
eNodeB LTE V100R006 Local
Commissioning
30
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Transmission Data
Page58
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Key MO to configure
Page59
ACLACLRULE
IKEPROPOSALIKEPEER
IPSECPROPOSALIPSECPOLICY
PSECBINDPACKETFILTER
CERTMKAPPCERTTRUSTCE
RT
CROSSCERT
� Digital
Certificate
ADD ETHPORT
LinkEnd Point
ADD DEVIP
ADD IPRT
ADD SCTPLNK
ADD CPBEARER
ADD S1INTERFACE
ADD X2INTERFACE
ADD IPPATH(S1&X2)
ADD ENODEBPATH
ADD DEVIP
ADD IPRT
ADD SCTPTEMPLATE
ADD SCTPHOST
ADD SCTPPEER
ADD USERPLANEHOST
ADD USERPLANEPEER
ADD EPGROUP
ADD
SCTPHOST2EPGROUP
ADD
SCTPPEER2EPGROUP
ADD
UPHOST2EPGROUP
ADD
UPPEER2EPGROUP
ADD S1
ADD X2
ADD OMCH
ADD VLANMAP
SET DSCPMAP
ADD VLANCLASS
� Transmission Security
eNodeB LTE V100R006 Local
Commissioning
31
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page60
Configuring Radio Data
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Sectors
Page61
eNodeB LTE V100R006 Local
Commissioning
32
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Cells
Page62
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved.
Configure Neighboring Cells
Page63
eNodeB LTE V100R006 Local
Commissioning
33
Copyright © 2013 Huawei Technologies Co., Ltd. All rights reserved. Page64
Summary
� eNodeB commissioning Modes
� Commissioning Preparations
� The procedure of local commissioning through the USB
Disk
� The procedure of local commissioning through the LMT
� The procedure of local commissioning through LMT with
MML commands.
Thank youwww.huawei.com