Upload
duongnhu
View
217
Download
3
Embed Size (px)
Citation preview
MILLENNIUM SERIES - E022G1LProgressive Cavity Pump
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.7855
Pump DescriptionThe Liberty Millennium Series E022G1L Heavy Duty Progressive Cavity Pump is ideal for high viscosity liquids and heavy waste solids and other abrasive pumping applications such blood and waste in poultry processing facilities. The E022G1L's flow rate of 22 gallons/100 revolutions @ 55 to 99 GPM coupled to its high temperature resistance of up to 350° degrees Fahrenheit makes it an ideal solution for your industrial heavy-duty pumping needs.
The E022G1L is a standard ANSI flanged pump design manufactured with high strength cast Iron or 316 Stainless Steel pump casings and designed in 1, 2 and up to 4 stages for 85, 170, 350 psi discharge pressures making it an ideal low-cost, maintenance free drop-in replacement pump. Standard suction and discharge flange size for the E022G1L is 6".
The Millennium Series low shear and gentle pumping action enables it to pump delicate fluids and not emulsify the liquid making it an ideal polymer pump or oil/water separation pump. Solids handling capability of up to up to 50% by weight allows even the toughest application to be pumped. The Millennium's modular design comes with a positively sealed, hardened gear joint assembly, hardened tool steel rotors or stainless steel rotors both with hard chrome plating for long-life pumping and a wide selection of stators in Buna Nitrile, Viton, EPDM and Natural Rubber.
All other wetted parts are either carbon steel or 316 stainless steel. The standard seal design is a set of packing with a Lantern Ring and flush connectors. Mechanical seal options are readily available.
Contact a Liberty Process Equipment Representative today for more information about the Millennium E022G1L Series of Progressive Cavity Pumps for blood and waste in poultry processing plants.
CurvesClick Links Below
Features
MaterialsRotor:
Stator:
Motor:
Inlet:
Chrome-Plated Tool Steel or Stainless Steel
Buna Nitrile, Natural Rubber, Viton™, EPDM
1-1/2 - 10 hp
6”
Outlet: 6” - ANSI Flange
Bases: Steel and Stainless Steel
• Low Shear• Solids Handling up to 50%• Hardened Joints• Packing or Mechanical Seal• 3-Stage Options• Steel or Stainless Steel
1-Stage1E022G1L
1-Stage1E022G1L
2-Stage2E022G1L
2-Stage2E022G1L
DrawingsClick Links Below
55 69.5 84 99
G P M
Millennium E022G1L 55-99
85-350GPM
PSI
MILLENNIUM SERIES - 1E022G1LProgressive Cavity Pump
Performance Curves
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.7855
1 Stage Pump70 Durometer (Performance based on water)
160
140
120
100
80
60
40
20
0
12
10
8
6
4
2
0
PU
MP
CA
PAC
ITY
(GP
M)
0 100 200 300 400 500 600 700
0 100 200 300 400 500 600 700
PUMP SPEED (RPM)
AB
SO
RB
ED
PO
WE
R (
HP
)
70 Durometer
MILLENNIUM SERIES - 2E022G1LProgressive Cavity Pump
Performance Curves
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.7855
2 Stage Pump70 Durometer (Performance based on water)
160
140
120
100
80
60
40
20
0
201816141210
86420
PU
MP
CA
PAC
ITY
(GP
M)
0 100 200 300 400 500 600 700
0 100 200 300 400 500 600 700
PUMP SPEED (RPM)
AB
SO
RB
ED
PO
WE
R (
HP
)
70 Durometer
43.31” (+/- 0.25)
17.19” (+/- 0.12)
12.5”
6”
11”
8”
6.5”
Discharge (END)6” FlangeANSI B16.1 FF
HoleSize0.875”
1-7/8” Shaft Dia.Keyway 0.5” x 0.25”
Suction (TOP)6” Flange ANSI B16.1 FF
5.5”7.875” 18” 11.94”
6.5”
8”
MILLENNIUM SERIES - 1E022G1LProgressive Cavity Pump
Dimensional Drawings
≈ lbs.
Net weight
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.78551 Stage Pump
440(Pump Rotation is Counter Clockwise) ALL DIMN: Inches
11”
MILLENNIUM SERIES - 2E022G1LProgressive Cavity Pump
Dimensional Drawings
≈ lbs.
Net weight
2525 Clearbrook Drive Arlington Heights, IL 60005
www.libertyprocess.com
P: 847.640.7867 F: 847.640.78552 Stage Pump
520
56.19” (+/- 0.25)
30.06” (+/- 0.12)
12.5”
6”
11”
(Pump Rotation is Counter Clockwise) ALL DIMN: Inches
6.5”
8”
1-7/8” Shaft Dia.Keyway 0.5” x 0.25”
Suction (TOP)6” Flange ANSI B16.1 FF
5.5”11.75” 27” 11.94”
8”
6.5”
Discharge (END)6” FlangeANSI B16.1 FF
HoleSize0.875”
11”