Features and Benefits* Double offset seat/disc/stem geometry to provide superior sealing with minimal seat contact and wear* Machined, tapered seat multiple sealing edges.* Single piece shaft and disc designed for maximum strength and Cv. * Internally cast disc position stop to prevent disc over travel while maintaining optimum disc/seat contact.* Stem is centered in the adjustable stem packing by oversized bearings eliminating stem leakage and fugitive emissions.* Disc spacers to center disc in seat to eliminate seat distortion.* Blow out proof stem to prevent injury and product loss.* Combination mechanical and pressure energized seal design for repeatable and reliable sealing performance and extended cycle life.* Seat retaining ring designed for dead end service (lug style) and provides easy removal for seat replacement.* Stem/disc connection allows minimal loss motion and high strength.

Product RangeSize/ASME Class: 2-1/2" - 24", Class 150 & 300Body Configuration: Wafer and Lug

Operators Available10 Position Lever Handle, Gear Operators, Pneumatic and Electric Actuators

Material of Standard ConstructionBody Carbon Steel or 316 Stainless SteelDisc 316 Stainless SteelStem 17-4 PH Stainless Steel

Seat RTFE/Stainless Garter Spring

SpecificationsValve Sizes 2 1/2" through 24" Flanged End Connections per ANSI B16.5.

Valve face to face dimension per MSS-SP-68.

Valve bodies are cast high quality steel, withstandard availability in ASTM-A-216 WCB CS andASTM A-351 CF8M SS. Body wall thickness meets ASME/ANSI B16.34 and complies with quality standard for steel casting MSS-SP-55.

High performance valve design meets the requirements of MSS-SP-68 for double offset design.

Valve pressure tests meet MSS-SP-61, API 598 and ANSI B16.104 valve inspection and testing.

Tagging meets the requirements of MSS-SP-25 and API 609B.

For NACE applications consult factory.

Bearing Stainless backed RTFE

Pressure Ratings(Cold Working Pressure) 2-1/2" through 24" 2-1/2" through 16" Class 150 Class 300Carbon Steel 285 psi 740 psiStainless Steel 275 psi 720 psi

HP SeriesMilwaukee Valve CompanyHigh Performance Butterfly Valves

MILWAUKEE VALVE

The information presented on this sheet is correct at the time of publication. Milwaukee Valve Company reserves the right to changedesign, and/or material specifications without notice. For the most current information access www.milwaukeevalve.com

MILWAUKEE VALVE

-2.685714-201.4286 -335.7143468.5714 334.2857

HPBV Pressure/Temperature Chart150/300 Pound Class WCB

0100200300400500600700800

-20 100 200 225 300 350 400Temperature (deg. F)

Pre

ssu

re (

psi

g)

RTFE

Steam Limit

150 Pound Class

Rev. 0904

300 CLASS

Valve A B C D E F G H S K L

Size Height Height Stem Lg Stem Dia Face Width Width Fastener Square Key Length Wafer Lug Qty Fastener

*2.5 5.59 9.46 1.63 0.625 1.750 2.30 2.30 1/4-20 0.46 0.88 10 15 8 3/4-10

3 5.59 9.46 1.63 0.625 1.875 2.30 2.30 1/4-20 0.46 0.88 11 20 8 3/4-10

4 6.25 11.00 1.63 0.625 2.125 2.30 2.30 1/4-20 0.46 0.88 16 23 8 3/4-10

*5 7.69 13.50 1.69 0.875 2.125 3.00 3.00 3/8-16 0.64 1.00 26 30 8 3/4-10

6 7.69 14.50 1.69 0.875 2.310 3.00 3.00 3/8-16 0.64 1.00 31 43 12 3/4-10

8 9.51 17.32 1.86 1.125 2.875 3.36 3.36 1/2-13 0.250 1.50 50 80 12 7/8-9

10 10.81 19.81 5.50 1.375 3.252 3.88 1.38 1/2-13 0.312 1.50 95 150 16 1-8

12 11.62 22.62 5.50 1.500 3.625 3.88 2.00 1/2-13 0.375 1.50 152 200 16 1 1/8-8

14 13.50 26.75 5.50 2.000 4.625 5.75 2.50 1/2-13 0.500 1.50 210 320 20 1 1/8-8

16 15.00 29.75 5.50 2.250 5.250 5.75 2.50 1/2-13 0.500 1.50 260 420 20 1 1/4-8

* Lug Only

Flange Data

Bare Stem J

Dimensions Mounting Flange Stem Connection Weight (lbs.)

SERIESANSI

CLASSBODY STYLE

BODY MATERIAL

DISC MATERIAL

STEM MATERIAL

SEAT MATERIAL

STEM PACKIING OPERATOR EXT. OPTIONS SIZE

XX X X X X X X X X X X XXXHP 1-150 L-LUG C-WCB S-CF8M 4-17-4 SS 1-PTFE 1-PTFE 1-BARE STEM A-ASSEMBLE DRY 020-240

3-300 W-WAFER S-CF8M 3-316 SS 2-RPTFE G-GRAPHITE 2-LEVER O-OXYGEN CLEAN4-UHMWPE 3-GEAR OP

4-ELECT5-PNEUMATIC

HOW TO ORDER MILWAUKEE VALVES HP SERIES HIGH PERFORMANCE BUTTERFLY VALVE

HP1LCS4111 040 = 4 INCH,HIGH PERFORMANCE,CLASS 150,LUG PATTERN,CARBON STEEL BODY,17-4 STEM,PTFE SEAT,PTFE PACKING,BARE STEM WITH NO EXT OPTIONS

PART NUMBER EXAMPLE

HP Series

150 CLASS

Valve A B C D E F G H S K L

Size Height Height Stem Lg Stem Dia Face Width Width Fastener Square Key Length Wafer Lug Qty Fastener

*2.5 5.59 9.46 1.63 0.625 1.750 2.30 2.30 1/4-20 0.46 0.88 10 12 4 5/8-113 5.59 9.46 1.63 0.625 1.875 2.30 2.30 1/4-20 0.46 0.88 11 13 4 5/8-114 6.25 11.00 1.63 0.625 2.125 2.30 2.30 1/4-20 0.46 0.88 16 23 8 5/8-11

*5 7.69 13.50 1.69 0.875 2.125 3.00 3.00 3/8-16 0.64 1.00 26 30 8 3/4-106 7.69 13.50 1.69 0.875 2.250 3.00 3.00 3/8-16 0.64 1.00 31 36 8 3/4-108 9.51 17.32 1.86 1.125 2.625 3.36 3.36 1/2-13 0.250 1.50 48 57 8 3/4-10

10" Lug 10.5 19.12 1.82 1.125 2.812 3.36 3.36 1/2-13 0.250 1.50 71 105 12 7/8-910 8.63 17.12 3.72 1.125 2.812 3.88 1.38 1/2-13 0.250 1.50 71 105 12 7/8-912 11.62 21.75 5.50 1.375 3.188 3.88 2.00 1/2-13 0.312 1.50 110 135 12 7/8-914 12.00 23.88 5.50 1.500 3.625 3.88 2.00 1/2-13 0.375 1.50 138 185 12 1-816 14.00 27.50 5.50 2.000 4.000 5.75 2.50 1/2-13 0.500 1.50 190 240 16 1-818 15.00 28.25 5.50 2.250 4.500 5.75 2.50 1/2-13 0.500 1.50 249 320 16 1 1/8-820 17.00 32.50 6.00 2.500 5.000 6.00 4.00 1/2-13 0.750 2.00 350 434 20 1 1/8-824 19.50 36.75 6.50 3.000 6.062 6.00 4.00 3/4-10 0.750 2.50 535 732 20 1 1/4-8

*Lug Only

Flange Data

Bare Stem J

Dimensions Mounting Flange Stem Connection Weight (lbs.)