For Mini Excavators and Backhoe LoadersMINI HYDRAULIC COUPLER

• Universal design picks up buckets and attachments compatible with the world's best known OEM manufacturers with the same class weight

• Two mechanical back-up safety features

JRB PowerLatchTM - Universal Advantage

• The multi-pin grabbing PowerLatchTM picks up a range of pin spreads from the best known machine manufacturers within the 5 ton group

• CAT Mini Ex (305D, 305E, 305.5)

• Mini Ex picks up other OEM Buckets in 5 ton range (Case, Komatsu, Kubota, Takeuchi, Volvo, Doosan)

• CAT Backhoe only (416, 417, 420, 428, 430, 438) - not multi-pickup

The JRB PowerLatchTM, by Paladin, is based on a time-tested proven design and offers safety, quality and reliability in a product that will last. It provides the power to carry out a range of tasks in the same day with the same machine.

Multi-Pin Grabbing Mini Excavator and Backhoe Loader Coupler Features• Two independent mechanical locks…a "true" twin-locking

coupler~ Automatically secures both front and rear attachment

pins in the event of hydraulic failure or power loss~ Unique and patented Automatic Blocking System (ABS)

to cover the front attachment pin~ Stops attachments from swinging dangerously in

operating mode if hydraulic power is lost~ Prevents inadvertent release of attachment; release is

only possible when inverted near the ground~ Safety check valves in coupler cylinder and solenoid

valve

• Strong, lightweight cast design minimizes effect on machine performance

~ Manufactured with a process utilizing high grade steel to produce a lighter, stronger and more durable design

~ Cast design provides additional strength in the specific areas that require it, while minimizing weight in areas that are not load bearing

~ The lighter weight improves machine efficiency and reduces fuel consumption

~ Can be welded if necessary

• Operator does not have to leave cab to change attachments, process is fully automatic

• Centralized lifting eye

• Wear indicators on rear hook

Specifications and design are subject to change without notice and without liability, therefore, whenever applicable specifications are in accordance with SAE standards.

POWERLATCHTM HYDRAULIC MINI COUPLERS

Modified hook to operate the ABS

unit

Hydraulic ram with improved port positions

for easy installation

ABS Unit (Automatic Blocking System) locks

front pin and also acts as a visual indicator

Blocking bar and leverStrong, durable, high tensile precision steel

cast design frame

JRB-

Pow

erLa

tchT

M M

ini E

x Cou

pler

s 05-

14 ©

201

4 Pa

ladi

n Po

wer

ful A

ttach

men

t Too

ls

|| PH: 800.456.7100 || www.paladinattachments.com || Connect with Paladin:

Hydraulic Couplers for Caterpillar Mini Excavators

Hydraulic kit and attachment pins included Range R (400 Mini Class)305D, CAT305E 305.5

Part Number 93C0093 93C0092Coupler Weight lbs/Kg 132/60 132/60Minimum Attachment Width AW 5.87" (149mm) 5.87" (149mm)Pin Diameter D 1.77" (45mm) 1.77" (45mm)Pin Spread min Min PS 8.66" (220mm) 8.66" (220mm)Pin Spread Max Max PS 10.24" (260mm) 10.24" (260mm)Coupler Vertical Offset Vo 6.30" (160mm) 6.30" (160mm)Coupler Horizontal Offset Ho 5.31" (135mm) 5.31" (135mm)Hook (Shell) Clearance**(in) Measurement is radius from pin center HC 2.30" (58mm) 2.30" (58mm)

Box Section Clearance**(in) Measurement is radius from pin center BC 2.15" (55mm) 2.15" (55mm)

Lift Eye Rating lbs. (Tonne) 4,409 (2.2) 4,409 (2.2)

These mini excavator couplers will pick up buckets and tools made for the following machines

CAT 305D, CAT305E, 305.5Kubota K50, KX57, U48, U55, KX161Case CX40, CX45 & CX55BVolvo EC45, ECR48, EW55, EC55B, ECR55C, ECR58Takeuchi TB145, TB153FR, TB250Komatstu PC40, PC50, PC55Doosan DX55

Hydraulic Couplers for Caterpillar Backhoe Loaders

Hydraulic kit and attachment pins included Range A (Class 10)416, 417, 420, 428, 430, 438

Part Number 93C0095Coupler Weight lbs/kg 165lbs/75kg

Minimum Attachment Width AW* AW-Link = 8.1" (206mm)AW-Stick = 10.1" (256mm)Pin Diameter D 1.97" (50mm) & 1.77" (45mm)Pin Spread PS 13.6" (345mm)Coupler Vertical Offset Vo 6.53" (166mm)Coupler Horizontal Offset Ho 6.50" (165mm)Hook (Shell) Clearance**(in) Measurement is radius from pin center HC 2.72" (69mm)

Box Section Clearance**(in) Measurement is radius from pin center BC 3.54" (90mm)

Lift Eye Rating lbs. (Tonne) 11,023 (5.0)Picks up CAT® backhoe attachments only

* The front and rear of the coupler on the attachment side are different widths.