6
There are times when we may change the content of the catalogue without warning There are times when printed photographs may differ from the retailer's actual specifications Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every effort has been made to ensure safety There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color Please always ensure that you have read the instruction manual before operating this vehicle A special license (Certification of the completion of a vehicle type construction machinery skilled operator's course) is required to operate construction machinery in excess of 3 tons Operation of specified cranes requires completion of a vehicle type construction machinery skilled operator's course, or completion of a small size mobile crane skilled operator's course MINIMUM SWING RADIUS 75X.02T.01 Printed in japan

MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

● There are times when we may change the content of the catalogue without warning ● There are times when printed photographs may differ from the retailer's actual specifications ● Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every effort has been made to ensure safety ● There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color ● Please always ensure that you have read the instruction manual before operating this vehicle ● A special license (Certification of the completion of a vehicle type construction machinery skilled operator's course) is required to operate construction machinery in excess of 3 tons ● Operation of specified cranes requires completion of a vehicle type construction machinery skilled operator's course, or completion of a small size mobile crane skilled operator's course

MINIMUM SWING RADIUS

75X.02T.01 Printed in japan

● There are times when we may change the content of the catalogue without warning ● There are times when printed photographs may differ from the retailer's actual specifications ● Photographs shown above have been taken in poses for use in this catalogue. When exiting machinery, please ensure that operational equipment is always grounded, and that every effort has been made to ensure safety ● There are times when the color of catalogue photographs may, as a result of the printing process, differ from the actual color ● Please always ensure that you have read the instruction manual before operating this vehicle ● A special license (Certification of the completion of a vehicle type construction machinery skilled operator's course) is required to operate construction machinery in excess of 3 tons ● Operation of specified cranes requires completion of a vehicle type construction machinery skilled operator's course, or completion of a small size mobile crane skilled operator's course

MINIMUM SWING RADIUS

75X.02T.01 Printed in japan

Page 2: MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

MADE IN JAPAN The world knows that Japanese design and manufacturing is the best especially for industrial products. The hydraulic excavator is

not the exception when a total integration concept is required in design work involving key components, manufacturing engineer-

ing and product quality assurance in the factory.

All SUMITOMO hydraulic excavators are engineered and assembled in SUMITOMO's its one and only factory located in Chiba

City, Japan, and distributed to each country in the world. This distinctive feature is unique to SUMITOMO, giving the SUMITOMO

machine users total comfort and reliance on product quality.

(Note: Some of the items manufactured and sourced in other countries may be assembled in Japan.)

1 2

Page 3: MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

3020mm190mm 75mm2320mm

1785mm(SH60-2:1750mm)

1235mm(SH60-2:1750mm)

515mmSH60-2

kN57kN57 kN39kN39

In addition to boasting top-class compact rotational capability for cramped areas, outstanding stability, and powerful digging and drive strength have been realized. On various kinds of work-sites it can always be trusted to perform and maneuver exactly as the operator intends.

Minimum Swing Radius

Rotational ABSA rotation shock-absorber device has been installed to soften jolts that occur when the vehicle halts rotation. This is particularly useful for pinpointing position, and preventing spillages during manual operation.

Employment of speed assisted mechanicsThrough employing an oil return system in the arm and boom, speed assisted operations for digging, as well as fuel consumption, have been improved.

Diversified operational fieldRoad works Forest road works Demolition works

Clearing the Non-road Special MotorVehicle Exhaust Emission Standard

● Turbo engine with intercoolerAir intake efficiency is improved by the intercooler.

It cools air taken in, which has been heated by the

compression of the turbo charger. In addition to a

great reduction of NOx and PM, high output and

improved fuel consumption have been realized.

Suction

Cooled condensed air (flows to the engine)

External air

Suction ExhaustCompressed

hot air Turbo charger

Engine

Intercooler

Radiator

Precision movement and secure operational control, “front and back”, with a rounded body-form that minimizes excess width

Track widthExcess cab width Excess rear width

Width

Excess of full rear swing width

Minimum front swing radius

Bucket digging capacity

● Arm digging capacity

Tail swingradius

● Cooled EGR systemExhaust gas is re-circulated and combustion

temperature lowered by the EGR (Exhaust Gas

Recirculation) engine. In addition, a water-cooled

EGR system has been employed, which further

efficiently reduces NOx (nitrogen oxide).

Cooled water release Cooled water intake

Piston

Connecting rod

system EGR valve

Control unitPartial utilization

of exhaust

Exhaust

EGRcooler

3 4

Page 4: MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

Double element air cleaner

Condenser

Battery (maintenance free)

Reserve tank

Water separator

Fuel filter

Oil filter

Ease of cleaning aroundradiator

Diverse innovations designed to reduce running costs and make maintenance easy. In terms of both cost and labor, you will really come to appreciate its efficiency the longer you use it.

Maintenance

High-Performance Return Filter

The hydraulic oil change interval is 5,000 hours, and the return filter change interval is 2,000 hours. One high performance return filter keeps the same level of filtering effect as a nephron.

Ground Level Access

Various parts of the excavator can now be cleaned and changed from ground level without climbing onto the body of the vehicle. Maintenance is no longer troublesome.

●Fuel and oil filters The fuel and oil filters are installed in positions that can be accessed from ground level, so replacing them is made simple.

Engine Oil Drain Coupler

The engine oil pan is provided with a drain coupler. This makes it easier to do drain work and prevents oil from spattering because of the attached drain hose.

EMS (Easy Maintenance System) as Standard

SUMITOMO's new improved EMS keeps the pins and bushes fully lubri-cated at all times and prevents rattling. This system significantly extends the service life of the pins and bushes.

The interval of greasing around the bucket is 250 hours, and the interval for the other sections is 1,000 hours, keeping the joints lubricated for a long time and extending the service life of parts by reducing abrasion and rattling.

5 6

●Hydraulic • oil change:5,000 hours

●Life of filter:2,000 hours※The oil and filter change interval depends on the working conditions.

●Greasing interval for other sections:1,000 hours

■EMS bushing

A solid lubricant embedded in high strength brass forms a layer on the bushing surface to prevent contact between metals, maintaining an excellent lubricated state to reduce the abrasion of joints.

The surface of the pin is plated to increase the surface hardness and to improve the wear resistance accordingly.

Special bushing

Dust seal

Plated pin

Solid lubricant

High-strength brass

※The greasing interval depends on the working conditions.

●Bucket greasing interval :250 hours

① ② ③ ④

Sections equipped with EMS bushing

Precautionary use of EMSGrease is enclosed, however, greasing is necessary every 1000 hours or six months depending on the level of dusting conditions.Greasing is also necessary after any components have been submerged underwater for prolonged periods.Greasing is also recommended after use with hydraulic breakers, crushers or other high impact attachments such as rock saws etc. Bucket pins should be cleaned thoroughly when removing or attaching new buckets.

Oil coolerOil cooler

Inter-coolerInter-cooler

RadiatorRadiator

The High-Performance Return Filter is made more precisely to condense the Nephron filter function.

Conventional return filter High-performance return filter

Page 5: MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

120mmSeat slide range

120mm

120mm

Operation-consoleslide range

120mm

Total slide range

Seat slide range

Operation-consoleslide range

Total slide range

240mm240mm

Travel pedals are optional equipment

How safely, and in what level of comfort can the driver carry out daily operations?We have extended every possible care and attention to ensure that both safety and comfort are provided.

Operator Comfort and Safety

Comfortable and spacious cab

Spacious foot space

Slide-door windows

Emergency escape hammer Reversing rear-view mirror Cab roof window Membrane switch Emergency stop switch Defroster/Cup holder

Stereo speakersAM/FM radio

Full operation-console slide adjustment (Reclining seat)

Gate-type lock lever on the operation lever to prevent operational errors

Air conditioner installed as standard

An air conditioner is fitted as standard. Front facing airflow vents and a defrosting function allow a pleasant work environment to be maintained.

Employment of fluid-mount suspension to reduce fatigue

Impacts and vibrations on the cab are effectively absorbed, providing a pleasant and comfortable ride, as well as reducing noise levels inside the cab. Operator fatigue is reduced.

Floor design allows easy access to and from cab

7 8

Silicon oil

Page 6: MINIMUM SWING RADIUS · 2017. 3. 8. · 3020 mm 190 mm 2320 mm 75 mm 1785 mm (SH60-2:1750mm) 1235 mm (SH60-2:1750mm) 515 mm SH60-2 5577 kN 3399 kN In addition to boasting

9 10

B

LK

DE

A

I

CB

J

Q

G

H

F

N

O M

A

C

F G

H

I

D

E P R

■Working Range ■Dimensions

BLADE : UP ARM : STD ARM SHOE : 450G BUCKET : 0.28BUCKET

ARM LENGTH = 1.71 (m) MAXIMUM REACH = 5.52 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)

5m

4m

3m

2m

1m

0

-1m

-2m

-3m

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

1610*

1610*

1490

1340

1250

1120

1130

1010

1080

970

1100

980

1210

1070

1470

1300

2200*

1960

4.07

4.07

4.8

4.8

5.25

5.25

5.47

5.47

5.51

5.51

5.36

5.36

5.01

5.01

4.4

4.4

3.41

3.41

1360

1220

1320

1180

1270

1130

1230

1090

1210

1070

1670*

1670*

1700*

1700*

1900*

1790

1900

1690

1800

1600

1730

1530

1690

1490

1690

1490

1600*

1600*

1770*

1770*

2230*

2230*

2860*

2670

2840

2470

2720

2360

2670

2320

2680

2330

2550*

2390

2990*

2990*

2490*

2490*

3910*

3910*

4560*

4560*

3520*

3520*

Radius of Load

Max.Radius

1590*

1590*

1810*

1810*

4180*

4180*

4260*

4260*

2420*

2420*

1990*

1990*

2690*

2640*

4110*

4000*

3880*

3880*

2.88

2.88

2.56

2.56

1.39

1.39

2.11

2.11

2.2

2.2

1.78

1.78

1.11

0.98

1.11

0.99

1.72

1.72

Min.Radius

BucketHook

Height 5m 4m 3m 2m

BLADE : DOWN ARM : STD ARM SHOE : 450G BUCKET : 0.28BUCKET

ARM LENGTH = 1.71 (m) MAXIMUM REACH = 5.52 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)

5m

4m

3m

2m

1m

0

-1m

-2m

-3m

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

1610*

1610*

1560*

1340

1600*

1120

1710*

1010

1830*

970

1920*

980

2020*

1070

2120*

1300

2200*

1960

4.07

4.07

4.8

4.8

5.25

5.25

5.47

5.47

5.51

5.51

5.36

5.36

5.01

5.01

4.4

4.4

3.41

3.41

1730*

1220

1860*

1180

1990*

1130

2070*

1090

2020*

1070

1670*

1670*

1700*

1700*

1900*

1790

2190*

1690

2460*

1600

2630*

1530

2630*

1490

2410*

1490

1600*

1600*

1770*

1770*

2230*

2230*

2860*

2670

3400*

2470

3620*

2360

3570*

2320

3250*

2330

2550*

2390

2990*

2990*

2490*

2490*

3910*

3910*

4560*

4560*

3520*

3520*

Radius of Load

Max.Radius

1590*

1590*

1810*

1810*

3180*

4180*

4260*

4260*

2420*

2420*

2140*

1990*

3590*

2640*

4810*

4000*

3700*

3880*

2.88

2.88

2.56

2.56

1.86

1.39

2.11

2.11

2.2

2.2

1.86

1.78

1.86

0.98

1.86

0.99

1.86

1.72

Min.Radius

BucketHook

Height 5m 4m 3m 2m

BLADE : UP ARM : LONG ARM SHOE : 450G BUCKET : 0.22BUCKET

ARM LENGTH = 2.12 (m) MAXIMUM REACH = 5.92 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)

5m

4m

3m

2m

1m

0

-1m

-2m

-3m

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

1390*

1390*

1290

1160

1100

990

1000

900

960

860

970

870

1050

930

1230

1090

1680

1480

4.59

4.59

5.25

5.25

5.66

5.66

5.87

5.87

5.91

5.91

5.77

5.77

5.44

5.44

4.89

4.89

4.03

4.03

1420

1280

1380

1240

1330

1190

1270

1130

1220

1090

1190

1060

1430*

1430*

1490*

1490*

1700*

1700*

1930

1720

1810

1610

1730

1530

1670

1480

1660

1460

1690

1490

1920*

1920*

2560*

2560*

2880

2510

2730

2370

2650

2300

2640

2290

2680

2330

2570*

2570*

3540*

3540*

4930*

4770

4070*

4070*

Radius of Load

Max.Radius

1350*

1350*

1470*

1470*

2270*

2270*

3920*

3920*

3000*

3000*

1900*

1900*

2290*

2210*

3450*

3340*

4930*

4930*

3.29

3.29

3.03

3.03

2.08

2.08

2.03

2.03

2.13

2.13

1.69

1.69

1.11

0.98

1.11

0.98

1.11

1.11

Min.Radius

BucketHook

Height 5m 4m 3m 2m

BLADE : DOWN ARM : LONG ARM SHOE : 450G BUCKET : 0.22BUCKET

ARM LENGTH = 2.12 (m) MAXIMUM REACH = 5.92 (m) TIPPING CAPACITY (MARK: ) = 75.0 (%) HYDRAULIC CAPACITY (MARK:*) = 87.0 (%)

5m

4m

3m

2m

1m

0

-1m

-2m

-3m

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

We

Ws

1390*

1390*

1350*

1160

1370*

990

1450*

900

1590*

860

1740*

870

1830*

930

1940*

1090

2040*

1480

4.59

4.59

5.25

5.25

5.66

5.66

5.87

5.87

5.91

5.91

5.77

5.77

5.44

5.44

4.89

4.89

4.03

4.03

1500*

1280

1590*

1240

1740*

1190

1900*

1130

2020*

1090

2040*

1060

1430*

1430*

1490*

1490*

1700*

1700*

2010*

1720

2330*

1610

2550*

1530

2620*

1480

2500*

1460

2060*

1490

1920*

1920*

2560*

2560*

3180*

2510

3530*

2370

3590*

2300

3390*

2290

2880*

2330

2570*

2570*

3540*

3540*

4930*

4770

4070*

4070*

Radius of Load

Max.Radius

1350*

1350*

1470*

1470*

2270*

2270*

3920*

3920*

3000*

3000*

2220*

1900*

3230*

2210*

4610*

3340*

4310*

4930*

3.29

3.29

3.03

3.03

2.08

2.08

2.03

2.03

2.13

2.13

1.86

1.69

1.86

0.98

1.86

0.98

1.86

1.11

Min.Radius

BucketHook

Height 5m 4m 3m 2m

■Lifting Capacity

SH75X-3B

1.71m

6520mm

4140mm

7330mm

5250mm

3640mm

1785mm

1235mm

415mm

205mm

2.12m

6900mm

4540mm

7620mm

5540mm

4100mm

2085mm

SH75X-3B

STD Specifications

1.71m

0.28m3

7920kg

ISUZU AU-4LE2X

40.0kw/2000min-1

2179ml(cc)

2 variable displacement axial piston pumps

29.4Mpa

Variable displacement axial piston motor

Mechanical disc brake

Fixed displacement axial piston motor

5.1/3.3km/h

59kN

70% <35°>

35kPa

9.5min-1

57kN

38kN

100liter

97liter

0.11m3

0.10m3

STD

3

-

370mm

136kg

0.17m3

0.15m3

STD

3

-

480mm

161kg

0.22m3

0.19m3

STD

4

673mm

600mm

178kg

0.28m3

0.24m3

STD

4

804mm

730mm

204kg

0.34m3

0.30m3

STD

4

945mm

865mm

227kg

×

Max. digging radius

Max. digging depth

Max. digging height

Max. dumping height

Max. vertical wall cut depth

Min. front swing radius

Rear end swing radius

Max. lift above ground

Min. drop below ground

A

B

C

D

E

F

G

H

I

Arm length

■Working Range SH75X-3B

1.71m

5915mm

4492mm

2900mm

1425mm

2210mm

2845mm

745mm

20mm

2700mm

2225mm

1065mm

1160mm

1870mm

2320mm

2470mm

450mm

360mm

2320mm

450mm

2.12m

5910mm

4487mm

2950mm

Overall length

Length from center of machine (to arm top)

Length from center of machine (to shoe top)

Center to center of wheels

Overall track length

Overall height

Clearance height under upper structure

Shoe lug height

Cab height

Upper structure overall width

Width from center of machine (left side)

Width from center of machine (right side)

Track gauge

Overall track width with 450mm

600mm

Std. Shoe width

Minimum ground clearance

Width of blade

Height of blade

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

Arm length

■Dimensions

With side cutter

Without side cutter

1.71m arm

2.12m arm

■Bucket

◎:Suitable for materials with density up to 2000kg/m3 or less●:Standard bucket (Suitable for materials with density up to 1800kg/m3 or less)○:Suitable for materials with density up to 1600kg/m3 or less△:Suitable for materials with density up to 1200kg/m3 or less×:Not available

Bucket capacity (ISO/SAE/PCSA heaped)

Bucket capacity (CECE heaped)

Bucket type

No. of tooth

Width

Weight

Engine

Hydraulic

System

Performance

Others

■Principal specifications

Arm length

Bucket capacity (ISO heaped)

Std. Operating weight

Make & model

Rated output

Displacement

Main pump

Max pressure

Travel motor

Parking brake type

Swing motor

Travel speed

Drawbar pull

Grade ability

Ground pressure

Swing speed

Bucket

Arm

Fuel tank

Hydraulic fluid tank

■Weight & Ground pressure

Shoe type

Triple grouser shoe

Shoe width

450mm

600mm

Overall width

2320mm

2470mm

Operating weight

7920kg

8030kg

Ground pressure

35kPa

27kPa

SH75X-3BModel

SH75X-3BModel

■Standard equipment

・Quick change 4way (Kit)・Travel pedal

■Optional equipment

●Hydraulics system・High-performance return filter・One-touch idle・Changeable 2-speed-travel・Rotational ABS●Safety equipment・Rear-view mirror・Gate lock lever・Emergency escape hammer・Seat belt・Cab-top headlight

・Travel alarm・Theft prevention dog-chain・Boom holding valve・Engine emergency stop

switch●Cab/interior equipment・KAB seat・Large-size rounded cab・Fluid mount ・Air conditioner・Defroster

・Automatic lock for front facing window・Automatic point wiper

connecter・Intermittent wiper with washer・Reclining seat・Cup holder・Ashtray・Room lamp・Hat hook・AM/FM Radio

●Others・Engine that complies with

tear-3 exhaust emissions regulations

・EMS (Easy Maintenance System)

・Long life hydraulic fluid・Front-face protective net for

radiator・Aluminum radiator・Aluminum oil cooler

・Tool kit・Grease gun・Fuel filter・Double-element air cleaner

WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE

WE : OVER END WS : OVER SIDE WE : OVER END WS : OVER SIDE