1. If you were awarded a project, you will start work:a. One
week before the approval of the authoritiesb. After the approval of
the authoritiesc. One day before the approval of the authorities2.
Project Scope Management:a. Define scope and control scopeb.
Executing scope and verify scopec. Closing process and Create work
breakdown structured. All of the abovee. Only A & B3. Scope
Management starts with is:a. To identify the client requirementsb.
Meet the teamc. Review strategic plan4. Final as built drawings for
what purposea. To keep record for later maintenanceb. To give more
work to architectc. To be used for further renovation5. Control
department work startsa. From the beginning of the projectb. During
constructionc. After construction6. Project management is ideally
suited excepta. Accountabilityb. Flexibilityc. Innovationd. Speede.
Repeatability7. A critical path is the ----------------------in the
project management:a. longest b. shortest c. none8. The forward
pass review of the project management will indicate the
following:a. The earliest start of the taskb. The earliest finish
of the taskc. Critical path (longest path)d. Only A & Be. All
of the above9. The back pass review of the project will indicate
the following:a. The latest start of the task.b. The earliest
finish of the task.c. The critical path.d. Only A & Ce. All of
the above. 10. Intersecting point for WBS and OBSa. Cost accountb.
Intersect matrixc. Project matrixd. None of above11. For operation
and designed auto mobile factorya. Mechanical Engineerb. Civil
Engineerc. Chemical Engineerd. Petroleum Engineer12. Which of the
following discipline is most suitable for doing a natural gas
pipeline work?a. Mechanical Engg b. Petroleum Engg c. Chemical Engg
d. Civil Engg 13. Gypsum board at residence and industrial building
used excepta. Low cost b. Ease of installationc. Recyclability14.
Stress defineda. Strain time forceb. Mass divide volumec. Pressure
time length d. None of above15. What is the last of estimation for
projecta. Estimationb. Assembly schedule16. Which one of the
following is suitable in engineering manner? Decision shall be
based on reason than situation .a. Quantity Thinking. b. Logical
Thinking.c. Interpersonal Skills.d. Honesty. 17. What is QSAS?a.
Qatar Sustainability Assessment System18. An activity in a project
network can be represented by which of the following?a. Arrow b.
Line c. Noded. All of the above 19. Before starting work at site,
the major factor has to be checked is?a. Access to site (EFE) b.
Storage of Water, tools & equipments c. Safety d. Approval from
MMUP / Civil / Defence etc. e. All of the above20. Software
programming flowa. Plan, Do, Check, Actb. Plan, Do, Act, Checkc.
Plan, Act, Do, Check21. First step of Scope planning starts witha.
Budgetingb. Current earning estimationc. Objectives and
requirements to satisfy customer 22. In network which point getting
more inward flowa. Floatb. Critical pathc. Slackd. Merging point23.
What is the least level of WBSa. Deliverableb. Costc. Work
packaged. Lowest sub deliverable24. The best place to build an
exhibition and convention center (near the Airport? Or in satellite
place far from Urban? Etc)25. One situation for cancel project.26.
What is the most sensitive period in the project?
