Industrial Connection Systems, Marking and Mounting Material

Clipline

Industrial Plug Connectors

plusCon

PCB Connection Systems and Electronic Housings

CombiCon

Surge Protection

TrabTeCh

Signal Converters, Switching Devices and Power Supplies

inTerfaCe

Components and Systems

auTomaTion

PHOENIX CONTACT GmbH & Co. KG32823 Blomberg, GermanyPhone: +49/52 35/3-00Fax: +49/52 35/3-1 07 99www.phoenixcontact.com

Further information on the products introduced here and on the world of solutions from Phoenix Contact can be found at www.phoenixcontact.com

or contact us directly!

MN

R 5

2004

103/

15.0

4.20

08-0

0

P

rint

ed in

Ger

man

y

©

PH

OEN

IX C

ON

TAC

T 2

008

power supply unitsFor superior system availability

2 PHOENIX CONTACT

News –The latest technology in every class

The performance and reliability of a power

supply is critical to the operation of today´s

complex control systems. Phoenix Contact

power supplies are designed to meet and

exceed the demands of modern control

systems in order to ensure optimum

system performance.

Worldwide use due to wide-range input •

and international approvals

High system reliability due to long mains •

failure bridging times with full load and

high MTBF > 500.000 h

To connect in parallel to •

increase power or achieve

redundancy

Simplified startup with •

LED-signaling

sTep poWerThe new device series is ideal for installation in distributor boards and lowprofile control panels. Now available with double power density and high energy efficiency with ten devices offered in four different pitches.

QuinT poWerThese highly functional devices are equipped with Power Boost, preventive function monitoring and Selective Fusebreaking Technology (SFB) and are now available in 12 and 48 VDC versions as well.

Trio poWer TRIO POWER is used in series applications. The new 24 V / 5 A is a flexible device that can be operated with two and three-phase mains connection. New areas of application open up with 12 and 48 VDC output voltages.

mini poWer Used in distributed automation, this power supply unit with an integrated UPS provides a buffer time of up to 45 minutes. It also features extensive signaling and optimized battery management.

PHOENIX CONTACT 54 PHOENIX CONTACT

Compact power supply units of the new

QUINT POWER generation maximize

system availability. Even standard power

circuit-breakers can be triggered quickly

and reliably with SFB technology (Selective

Fusebreaking Technology) with six times

the nominal current for 12 ms. Defective

current paths are selectively disconnected,

the defect is limited and the important

system parts remain in operation.

A comprehensive diagnosis is made by

continuously monitoring the output voltage

and current. This preventive function

monitoring visualizes the critical operating

modes and reports them to the control

unit before an error occurs.

QUINT POWER guarantees superior

system availability.

QUINT POWER power supply units – Superior system availability with SFB technology

efficiently selective protection with sfb technology

In order to be able to trigger standard power circuit-breakers magnetically and quickly, power supply units must be able to supply a multiple of the nominal current for a short period. With the SFB technology (Selective Fusebreaking Technology), six times the nominal current for 12 ms, this current reserve is always available.

Worn display cable: The fuse triggers; the lower level display is dark. The control unit and the sensor and actuator systems continue to operate without any interruption. The production continues.

6 PHOENIX CONTACT PHOENIX CONTACT 7

QUINT POWER power supply units offer

functional advantages in an especially slim

design. The unique SFB technology and the

extended preventive function monitoring

increase application availability.

QUINT POWER power supply units – For superior system availability

Compensation of voltage dips

preventive function monitoring

Reports the critical operating states before any error occurs by continuously monitoring the output voltage and current

Remote monitoring using active switching outputs and floating relay contacts

service-friendly connection technology

COMBICON connectors (up to and including 10 A)

reliable starting of heavy loads

static power reserve POWER BOOST contiuous with up to 1.5 times the nominal current

Slim design

saves up to 50% space in the control cabinet

rugged design

Metal housing and wide temperature range of -25 to +70°C

Third minus terminal as grounding terminal block

minimize the installation costs

Quick triggering of the commercial power circuit-breakers

Dynamic power reserve SFB technology (Selective Fusebreaking Technology) with six times the nominal current for 12 ms

Output voltage can be set on the front side

A voltage range of 5 ... 60 V DC is covered with three power supply units with output voltages of 12, 24 and 48 V DC

Worldwide use due to wide-range input and international approvals

high operational reliability due to high MTBF > 500.000 h and long mains buffering times > 20 ms, high voltage resistance of single-phase devices up to 300 V AC

To connect in parallel to increase power and achieve redundancy

semi f47-200 meets the requirements of the semiconductor industry as regards mains voltage dips

Three-phase devices proper operation even when a phase permanently fails, high surge voltage strength up to 6 kV using integrated gas arrester

8 PHOENIX CONTACT PHOENIX CONTACT 9

TRIO POWER combines basic functionality

with high quality and reliability. This makes

them ideal for use in series applications.

TRIO POWER power supply units – Basic functionality at the highest level

A new developed ASIC, enables maximum energy efficiency and uniquely low power dissipation in idling mode

saving energy

High MTBF >500000 h

U/I characteristic curve for the supply of capacitive loads

reliable supply

Wide temperature range from -25 to +70°C

outdoor installation

For installation distributors and flat

operatorl panels, STEP POWER, the new

family of power supply units, is the ideal

choice. The low power dissipation in idling

mode and high degree of efficiency make

for maximum power efficiency in their

class.

STEP POWER power supply units – Specially designed for building automation

Metal housing and wide temperature range of -25 to +70°C

rugged design

high operational reliability

High MTBF >500000 h

High voltage resistance of single-phase devices up to 300 V AC

Third minus terminal serves as g rounding terminal block

minimize the installation costs

Output voltage can be set on the front side

Compensation of voltage dips

Snap onto the DIN rail or direct panel mounting

easy to mount

Uninterruptible power supply units (UPS)

provide power even if the mains fails.

An uninterruptible solution consists of

three functional units.

Uniterruptible power supply units – The ideal solution at a glance

select the desired buffer time as well as the required load current. The color code gives you the ideal solution.

20 A shall be buffered for 10 min. The color code “orange” indicates the solution of the electronic switchover unit QUINT-DC-UPS/24DC/20A in combination with the energy storage QUINT-BAT/24DC/7.2AH. An additional power supply unit is required.

example

Power supply unit Electronic switchover unit

Energy storage

flexible• : QUINT DC-UPS 20 or 40 A in combination with 3.4, 7.2 or 12 Ah, modular combination of electronic switchover unit and energy storage

retrofitting made easy:• QUINT DC-UPS 10 A, electronic switchover unit with integrated battery as energy storage

space-saving:• MINI DC-UPS, com-bines power supply unit and electronic switchover unit in the same housing

maintenance-free: • Buffer module, energy storage capacitor-based for short-term failures

0.2 0.5 1 4 2 3 5 6 7 8 9 10 20 30 45 1 2 3

1 A

2 A

3 A

5 A 1+1

7 A 1+1

10 A 1+1

15 A 1+1 1+1

20 A 1+1 1+1

25 A 1+1 1+1

30 A 1+1 1+1

35 A 1+1

40 A 1+1

1+1= In this case, two battery modules of the same capacity are required

Seconds Minutes Hours Buffer time/ Load current

input: 22,5 to 30 V DC output: 24 V DC (Uin -0,5 V) buffer mode: 27,9–19,2 V DC

24 V / 20 A 24 V / 10 A 24 V / 20 A 24 V / 20 A

QUINT-BUFFER/24DC/20 28 66 21 3

QUINT-DC-UPS/24DC/10 28 66 22 6

QUINT-DC-UPS/24DC/20 28 66 23 9

QUINT-DC-UPS/24DC/20 28 66 23 9

maintenance-free capacitor-based

power buffer

With integrated 1.3 ah battery module

QUINT-BAT/24DC/3.4AH 28 66 34 9

QUINT-BAT/24DC/7.2AH 28 66 35 2

QuinT ups / QuinT baT

125

130

123

156

16466

123

145

125

130

66 112

125

130

100

125

130

64

F U u c

input: 1-phase, 85 to 264 V AC, 100 to 350 V DC output: 24 V DC (Uin -0,5 V) buffer mode: 27,9–19,2 V DC

24 V / 2 A 24 V / 2 A

MINI-DC-UPS/24DC/2 28 66 64 0

MINI-DC-UPS/24DC/2 28 66 64 0

MINI-BAT/24DC/0.8AH 28 66 66 6

MINI-BAT/24DC/1.3AH 28 66 41 7

mini ups / mini baT

107

99

67,5

107

99

67,5

110

130

52

107

99

67,5

input: 22,5 to 30 V DC output: 24 V DC (Uin -0,5 V) buffer mode: 27,9–19,2 V DC

24 V / 20 A 24 V / 25 A 24 V / 40 A 24 V / 40 A

QUINT-DC-UPS/24DC/20 28 66 23 9

QUINT-DC-UPS/24DC/40 28 66 24 2

QUINT-DC-UPS/24DC/40 28 66 24 2

QUINT-DC-UPS/24DC/40 28 66 24 2

QUINT-BAT/24DC/12AH 28 66 36 5

QUINT-BAT/24DC/3.4AH 28 66 34 9

QUINT-BAT/24DC/7.2AH 28 66 35 2

QUINT-BAT/24DC/12AH 28 66 36 5

QuinT ups / QuinT baT

123

156

125

130

125

130

123

145

125

130

23166

123

156

1646611266

123

156

125

23166

F U u c

130

~ + –

~ + –~ + – ~ + – ~ + – ~ + –~ + –

~ + –~ + – ~ + –~ + – ~ + –~ + – ~ + –~ + –

~ + – ~ + – ~ + –

u c

PHOENIX CONTACT 1512 PHOENIX CONTACT

3 3 3 3Worldwide use due to wide-range input and international approval package

3 3 3 3high operational reliability thanks to high MTBF > 500.000 h

3 3 3 3 To connect in parallel to increase power or achieve redundancy

3 3 3 3simplified startup with LED-signaling

3 3 3 3 outdoor installation possible thanks to wide temperature range

3 3 3Compensation of voltage dips and recharging of batteries based ondefinable output voltage

3 3 3high operational reliability withlong mains failure bridging times > 20 ms

3 3optimum device connection with COMBICON plug connectors(up to and including 10 A)

3 3active function monitoring via switching output for remote diagnostics

3 3reliable starting of heavy loads with power reserve POWER BOOST

3 3proper operation of three-phase devices even withpermanent failure of one phase

3function monitoring via floating relay contact for remote diagnostics

QU

INT

POW

ER

TRI

O P

OW

ER

M

INI P

OW

ER

STE

P PO

WER

Trio poWer 1˜ u c Trio poWer 3˜ u c

input: 1-phase, 85 to 264 V AC

24 V / 2,5 A 24 V / 5 A 24 V / 10 A 24 V / 20 A

TRIO-PS/1AC/24DC/2.5 28 66 26 8

TRIO-PS/1AC/24DC/5 28 66 31 0

TRIO-PS/1AC/24DC/10 28 66 32 3

TRIO-PS/1AC/24DC/20 28 66 38 1

12 V / 5 A 12 V / 10 A 48 V / 5 A 48 V / 10 A

TRIO-PS/1AC/12DC/5 28 66 47 5

TRIO-PS/1AC/12DC/10 28 66 48 8

TRIO-PS/1AC/48DC/5 28 66 49 1

TRIO-PS/1AC/48DC/10 28 66 50 1

input: 3-phase, 3 x 320 to 575 V AC

24 V / 5 A 24 V / 10 A 24 V / 20 A 24 V / 40 A

TRIO-PS/3AC/24DC/5 28 66 46 2

TRIO-PS/3AC/24DC/10 28 66 45 9

TRIO-PS/3AC/24DC/20 28 66 39 4

TRIO-PS/3AC/24DC/40 28 66 40 4

115

130

115

130

152,5

130

152,5

130

32 40 60 115

115

130

40

152,5

130

115

190

130

139

input: 10–32 V DC, 36–75 V DC input: 18–32 V DC

24 V / 1 A 24 V / 10 A

MINI-PS-12-24DC/24DC/1 28 66 28 4

QUINT-PS-24DC/24DC/10 28 66 37 8

24 V / 1 A

MINI-PS-48-60DC/24DC/1 28 66 27 1

DC-DC-Wandler

125

130

107

99

8022,5

F

U u c

sTep poWer j u c

input: 1-phase, 85 to 264 V AC, 95 to 250 V DC

24 V / 0.75 A 24 V / 1.75 A 24 V / 2.5 A 5 V / 6.5 A 24 V / 4.2 A

STEP-PS/1AC/24DC/0.75 28 68 63 5

STEP-PS/1AC/24DC/1.75 28 68 64 8

STEP-PS/1AC/24DC/2.5 28 68 65 1

STEP-PS/1AC/5DC/6.5 28 68 54 1

STEP-PS/1AC/24DC/4.2 28 68 66 4

12 V / 1.5 A 12 V / 3 A 12 V / 5 A 15 V / 4 A 48 V / 2 A

STEP-PS/1AC/12DC/1.5 28 68 56 7

STEP-PS/1AC/12DC/3 28 68 57 0

STEP-PS/1AC/12DC/5 28 68 58 3

STEP-PS/1AC/15DC/4 28 68 61 9

STEP-PS/1AC/48DC/2 28 68 68 0

24 V / 2 x 30 A / 1 x 60 A

QUINT-DIODE/40 29 38 96 3

94,5

62

84

Diode U u c

QuinT poWer 3˜ input: 3-phase, 3 x 320 to 575 V AC, 450 to 800 V DC

24 V / 5 A 24 V / 10 A 24 V / 20 A 48 V / 10 A 24 V / 40 A

QUINT-PS/3AC/24DC/5 28 66 73 4

QUINT-PS/3AC/24DC/10 28 66 70 5

QUINT-PS/3AC/24DC/20 28 66 79 2

QUINT-PS-3x400-500AC/48DC/10 29 38 21 9

QUINT-PS-3x400-500AC/24DC/40 29 38 64 6

48 V / 20 A

QUINT-PS-3x400-500AC/48DC/20 29 38 22 2

125

130

40

125

130

60

125

130

240

QuinT poWer 1˜ input: 1-phase, 85 to 264 V AC, 90 to 350 V DC

24 V / 3.5 A 24 V / 5 A 24 V / 10 A 24 V / 20 A 24 V / 40 A

QUINT-PS/1AC/24DC/3.5 28 66 74 7

QUINT-PS/1AC/24DC/5 28 66 75 0

QUINT-PS/1AC/24DC/10 28 66 76 3

QUINT-PS/1AC/24DC/20 28 66 77 6

QUINT-PS-100-240AC/24DC/40 29 38 87 9

48 V / 5 A 48 V / 10 A 48 V / 20 A

QUINT-PS/1AC/48DC/5 28 66 67 9

QUINT-PS/1AC/48DC/10 28 66 68 2

QUINT-PS-100-240AC/48DC/20 29 38 97 6

12 V / 15 A 12 V / 20 A

QUINT-PS/1AC/12DC/15 28 66 71 8

QUINT-PS/1AC/12DC/20 28 66 72 1

125

130

125

4032

125

130

125

130

125

130

60 90 240

130

mini poWer U u c

input: 1-phase, 85 to 264 V AC, (MINI-PS... 90–350 V DC)

24 V / 1,3 A 24 V / 1,5 A 24 V / 2 A ± 15 V / 1 A 24 V / 4 A 24 V / 100 W

MINI-PS-100-240AC/24DC/1,3 28 66 44 6

MINI-SYS-PS-100-240AC/24DC/1.5 28 66 98 3

MINI-PS-100-240AC/24DC/2 29 38 73 0

MINI-PS-100-240AC/2x15DC/1 29 38 74 3

MINI-PS-100-240AC/24DC/4 29 38 83 7

MINI-PS-100-240AC/24DC/C2LPS 28 66 33 6

5 V / 3 A 24 V / 1,5 A 10-15 V / 2 A 10-15 V / 8 A

MINI-PS-100-240AC/5DC/3 29 38 71 4

MINI-PS-100-240AC/24DC/1.5/EX 28 66 65 3

MINI-PS-100-240AC/10-15DC/2 29 38 75 6

MINI-PS-100-240AC/10-15DC/8 28 66 29 7

* optional, for supplying further modules of the same system with a regulated 24 V DC voltage. Two are required per power supply unit.

107

99

45

107

99

45

107

99

22,5

95

99

35

107

99

67,5

Din rail connector

me 17,5 Tbus 1.5/ 5-sT-3,82 Gn

27 09 56 1

*

99

107

67,5

125

130

69

61

90

36

61

90

54 72

61

90

61

90

90

asi U u c

input: 85 to 264 V AC, 90 to 350 V DC

30 V / 2,4 A

ASI QUINT 100-240/2.4 EFD 27 36 68 6

30 V / 4,8 A

ASI QUINT 100-240/4.8 EFD 27 36 69 9

125

145

70

eX F U u c

input: 85 to 264 V AC, 90 to 350 V DC

24 V / 5 A

QUINT-PS-100-240AC/24DC/5/EX 29 38 85 3

24 V / 10 A

QUINT-PS-100-240AC/24DC/10/EX 29 38 86 6

125

130

85

125

130

55

125

55

145

125

130

160

115

130

40

F F

FIn preparation:

72

61

90

F

F For QUINT POWER SFB in preparation:F B j u c (nur 24 V) F

For QUINT POWER SFB in preparation:F B j u c (nur 24 V)

Choose your power supply unit here from

our extensive range of products. Refer

to the table for the technical features of

QUINT POWER, TRIO POWER,

MINI POWER and STEP POWER.

Power supply units fromPHOENIX CONTACT –All the advantages at a glance