Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Mobilfunk GebäudeversorgungPassive-Distributed Antenna Systems (DAS)
2 | KATHREIN | Inhalt
Inhalt
Unternehmensporträt 3Mobilfunk und Gebäudeversorgung 4Einführung Passive-DAS 5Grundprinzip Passive-DAS 6Indoor Antennen 7Planungsbeispiel 8Serviceleistungen 9
Übersicht - Systemkomponenten
Datenblatt - Donor Antenne 11Datenblatt - Donor Antenne 12Datenblatt - Tappers & Splitters 13Datenblatt - Indoor Antenne 14Datenblatt - Indoor Antenne 15Datenblatt - Indoor Antenne 16Datenblatt - Indoor Antenne 17Datenblatt - Koaxialkabel 18
Unternehmensporträt | KATHREIN | 3
Kathrein ist ein international führender Spezialist für
zuverlässige, hochwertige Kommunikationstechnik.
Wir sind Innovations- und Technologieführer in der ver-
netzten Welt von heute. Durch unsere Lösungs- und
Systemkompetenz können Menschen weltweit kommu-
nizieren, sich informieren und Medien nutzen - ob zu
Hause, im Büro oder unterwegs. Dabei decken wir ein
breites Spektrum ab: von Mobilfunklösungen für Außen-
und Innenbereiche über Satellitenempfangs-, Breitband
und Rundfunktechnik bis zu Sende- und Empfangssys-
temen in Fahrzeugen.
Als Hidden Champion und Familienunternehmen arbeiten
wir seit 1919 an den Technologien von morgen. Mit hoch
engagierten Mitarbeitern und Leidenschaft für Kunden
und Qualität.
Wer wir sindwofür wir stehenund
Unsere Lösungen
Erfahren Sie mehr über uns auf www.kathrein-gmbh.at
4 | KATHREIN | Mobilfunk und Gebäudeversorgung
Hohe Immissionen Geringe Immissionen (Passive-DAS)
Einführung In Gebäuden wie zum Beispiel Einkaufszentren, Hotels
oder Büros besteht oft keine optimale Versorgung durch
das bestehende Mobilfunknetz. Gesprächsabbrüche sind
die Folge. Hier hilft eine eigene Gebäudeversorgung -
dabei wird das Signal der Mobilfunkanlage auf mehrere
Antennen innerhalb des Gebäudes aufgeteilt.
Die Sendeleistung und die Immissionen pro Antenne
verringern sich und eine gleichmäßige Versorgung des
Gebäudes mit Mobilfunk ist gewährleistet. Von Vorteil ist
die Empfangsqualität im Innenbereich. Handys können -
ohne dicke Mauern oder Fensterscheiben überwinden zu
müssen - eine optimale Verbindung zum Mobilfunknetz
herstellen.
Mobiltelefone und AntennenDie Sendeleistung jedes Mobiltelefons steigt, wenn die
Entfernung zwischen dem Gerät und einer Mobilfunk-
anlage größer wird, oder dicke Wände den Empfang
verschlechtern. Bei minimalem Empfang sendet das
Handy wie auch die Mobilfunkanlage mit maximaler
Sendeleistung. Durch den optimalen Empfang bei einer
Gebäudeversorgung regelt das Handy automatisch die
Sendeleistung auf ein Minimum zurück.
Planung und Bau Um ein Gebäude gleichmäßig mit Mobilfunk zu versor-
gen, werden mehrere Antennen installiert. Bei guter
Planung braucht eine einzelne Antenne nur mehr eine
Sendeleistung von ca. 0,1 Watt. Damit ist ein optimaler
Empfang für alle Mobiltelefone im Gebäude garantiert.
Immissionen Immissionen (Funkwellen) können technisch berechnet
oder direkt vor Ort gemessen werden. Das Ergebnis
ist die Leistungsflussdichte, die in Watt pro Quadrat-
meter (W/m2) angegeben wird. Die Fernmeldebehörde
prüft durch Messungen die Einhaltung der Grenzwerte
der Weltgesundheitsorganisation (siehe ÖVE/ÖNORM
E 8850). Die Messwerte bei einer Gebäudeversorgung
liegen ungefähr um das 4.500-fache unter den ver-
bindlichen Grenzwerten!
Sicherheit und Personenschutz Direkt vor der Antenne beträgt der Sicherheitsabstand
aufgrund der geringen Sendeleistung nur wenige Zenti-
meter, welche sich aufgrund der Bauform der Antenne
innerhalb des Gehäuses befinden. Die Antenne ist an der
Geschoßdecke montiert, daher ist dieser Sicherheits-
bereich auch nicht zugänglich bzw. erreichbar.
Eine große Anzahl von Studien wurde in den vergange-
nen zwei Jahrzehnten durchgeführt, um festzustellen,
ob Mobiltelefone ein potenzielles Gesundheitsrisiko dar-
stellen. Bisher wurden keine gesundheitsschädigenden
Wirkungen durch die Handynutzung festgestellt.
Kann eine Gebäudeversorgung medizinische Geräte
stören? Störfestigkeits- und Imissionsanforderungen
werden durch Normen, EU-Direktiven und nationale
Gesetze geregelt. Alle elektronischen Geräte müssen
so beschaffen sein, dass die Erzeugung elektromag-
netischer Störungen begrenzt ist, damit ein Betrieb von
weiteren Geräten gleichzeitig möglich ist.
Mobilfunk und Gebäudeversorgung
Any previous data sheet issues have now become invalid.
936.
5120
/a
Sub
ject
to
alte
ratio
n.
1-Port IndoorOmni AntennaVertical Polarization
790–960 1425–3800 5150–6000
V
1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi
Type No. 80020249Frequency range MHz 790 – 960
1425 – 38005150 – 6000
Polarization VerticalGain, typ. dBi ≈ 2Impedance Ω 50VSWR 790 – 806 MHz: < 1.7
806 – 960 MHz: < 1.51425 – 1710 MHz: < 2.01710 – 2200 MHz: < 1.42200 – 3800 MHz: < 1.65150 – 5300 MHz: < 2.45300 – 6000 MHz: < 2.0
Intermodulation IM3 dBc 790 – 960 MHz: < –140 (2 x 40 dBm carrier)1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)5150 – 6000 MHz: not relevant
Max. power W 50 (at 50 °C ambient temperature)Input 1 x 4.3-10 femaleProtection class IP 30Weight g
lbApprox. 500Approx. 1.1
Packing size mminches
278 x 278 x 17110.9 x 10.9 x 6.7
Diameter mminches
25810.2
Height mminches
94 (without connector)3.7 (without connector)
Fire load kWh 2.12
Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White. Additional painting is possible.
Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the 4.3-10 connector a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.
Available accessories: Broadband power splitters and tappers.
4.3-10 connector, female
Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws.
3 ho
les
dia.
5 m
m3
hole
s di
a. 0
.2 in
ches
dia.
160
mm
dia.
6.3
inch
es
min. Ø 35 mmmin. Ø 1.4 inches
∅ 258 mm | 10.2 inches
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com 80020249 Page 1 of 1
■ The antenna can be operated in all frequency ranges simultaneously.
■ The antenna needs no additional groundplane.
Einführung Passive-DAS | KATHREIN | 5
Mit steigendem Datenverkehr und dem Wunsch nach
permanenter Verfügbarkeit ist die Bereitstellung von
Mobilfunknetzen in Indoor-Umgebungen unentbehrlich
geworden. Die zur Verfügung gestellte Netzabdeckung
ist teilweise nicht ausreichend. Es entstehen Durch-
dringungsverluste bei bestimmten Fassadenmaterialien,
die zu einer schlechten Innenabdeckung führen.
Abhilfe schafft hier das Passive-DAS, welches bereits
in zahlreichen Gebäuden wie Einkaufszentren, Hotels,
Krankenhäusern usw. eingesetzt wird. Alternativ zum
Aktiv-DAS bietet das Passive-DAS Lösungen mit hoher
Zuverlässigkeit, geringe Material- und Wartungskosten
bei einfacher Planung und Ausführung.
Eine ABI-Studie vom Januar 2016 sieht die Verdopplung
der bestehenden Mobilfunk-Gebäudeversorungsanlagen
bis zum Jahr 2020 voraus.
Mit mehr als 3 Millionen verkauften Indoor-Produkten
und einer 20-jährigen Erfahrung in passiven Innen-
systemen ist KATHREIN der richtige Partner für künftige
Investitionen im Indoor-Bereich.
Abgesehen von unseren Qualitätsprodukten für den
Bereich DAS bieten wir Ihnen die komplette Dienst-
leistung von der Planung bis hin zur Installation (über
unsere qualifizierten Installationsbetriebe).
Passive Distributed Antenna Systems (DAS)
6 | KATHREIN | Grundprinzip Passive-DAS
In einer passiven Mobilfunk-Gebäudeversorgung
sind alle Komponenten, die für die Signalver-
teilung verwendet werden, vollständig passiv
ausgelegt und bestehen aus den folgenden vier
Hauptebenen:
A) Signalquelle
Die Signalversorgung für die
Innenräume des Gebäudes:
- Standard-Basisstation (BTS)
- Donor-Antenne
B) Signalverstärker
Das Signal wird in einem Repeater verstärkt
und an die Signalverteilung weitergeleitet.
C) Signalverteilung
Elektrisches Zubehör wie Splitter und Tapper
werden eingesetzt um den korrekten Signalpegel
auf die verschiedenen Antennen aufzuteilen.
D) Indoor Antennen
Multi-Band-Antennen werden für die
Abstrahlung des Signals in den einzelnen
Räumen benutzt.
Funktionsschichten eines Passive-DAS
4 I
Functional Layers of a Passive DAS
Passive DAS I Technical Description
In a passive DAS, all components which
are used for the distribution of the source
signals throughout the indoor location are
passive devices. A passive indoor system
consists of 4 main levels:
1. Signal source
The signal supply for the indoor
system can be fed into the building in
different ways:
a.Donor antenna + repeater
b.Standard base station (BTS)
c. Baseband unit (BBU) plus Remote
Radio Head (RRH)
2. Combiner (Point of Interface, POI)
The different source signals and diffe-
rent frequencies are interconnected to
a common interface
3.Signal distribution
Electrical accessories like splitters
and tappers are used to achieve the
correct signal level on the different
antennas
4. Indoor antennas
Multi-band antennas are used for the
distribution of the signal in the building
Basisstation BTS
Donor-Antenne
Tapper
Tapper
Repeater
Splitter
Indoor-Antennen
Indoor-Antennen
Splitter
Indoor Antennen | KATHREIN | 7
Bei einer Gebäudeversorgungen sind die Indoor Antennen
die einzig sichtbaren Elemente. Die Sichtfläche ist auf ein
Minimum reduziert und stört optisch somit die Raum-
gestaltung kaum noch.
Durch das unauffällige Breitbanddesign der KATHREIN
Indoor Antennen sind sie für verschiedene Anwendungen
einsetzbar:
Frequenzbereich: 370 - 470 MHz / 694 - 6000 MHz
Decken- oder Wandmontage
Omnidirektional oder gerichtet
MIMO-fähig
Die Auswahl der Antennen erfolgt in der Regel abhängig
von den Installationsanforderungen des Gebäudes, wo-
bei der Trend eindeutig zur vollständigen Integration geht.
Antennen können in Zwischenböden, unterschiedlichen
Deckenkonstruktionen und abgehängte Decken teilweise
oder vollständig integriert werden.
Für eine MIMO-Unterstützung empfiehlt es sich, anstelle
von zwei Einzelantennen eine spezielle MIMO-Antenne
mit zwei Polarisationen zu verwenden. Während der
Planungsphase ist auf ein potenziell erforderliches
MIMO-Setup zu achten (eventuelle Doppelverkabelung).
Abgehängte Decken aus Polystyrol, Steinwolle oderKunststoff (keine sichtbare Abdeckung). Ein Montagering
fixiert die Antenne über der abgehängten Decke.
Bei abgehängten Decken aus Holz, Gipskarton oder ähnlichen Materialien verwenden Sie die kleine
Abdeckplatte mit 250 mm Durchmesser.
Bei abgehängten Decken aus Metall, Edelstahl oder Aluminium verwenden Sie die große Abdeckplatte mit 385 mm Durchmesser.
Montage-Beispiele:
Indoor-Antenne
I 13
With our new Omni Antenna series for ceiling mounting, you
have the possibility to choose between different types of cover
plates, depending upon the type of suspension used for the
ceiling. We developed three different types to cover all possible
use-cases. The antenna module is always identical, but there
are different cover plates.
Solution 1
With a suspended ceiling made of polystyrene, rock wool or
plastic, there is no need to have a visible cover. You can use our
calibration ring to fix the antenna above the suspended ceiling.
Solution 2
With a suspended ceiling made of wood, plasterboard or similar
materials, you will require our small cover plate for a hole with a
diameter of 250 mm.
Solution 3
With a suspended ceiling made of metal, stainless steel or alu-
minium, you will require our large cover plate for a hole with a
diameter of 385 mm.
K-BOW I Antennas and Design
K-BOW is a next generation future-proof system.
With the pure fibre infrastructure between C-Hub,
E-Hub and RU, Kathrein is providing a system
which reduces costly additional cable installation
when an extension to future technologies and
adjusted traffic requirements is needed. Typically,
building infrastructures make use of universal
cabling, connecting radio, WiFi, IP and sensoring
networks.
K-BOW is based on a fibre cabling concept which
supports distances between the E-Hub and desig-
nated RUs of up to 3 km. Between C-Hub and E-Hub,
we support up to 20 km in distance.
This enables best-in-class applications for campus
or Micro C-RAN solutions in a dense urban high
traffic scenario.
By installing hybrid fibre cable (HFC), you have the
advantage of a thin flexible cable combined with the
option to reduce investments by a future-proof
broadband connection.
Cabling of a DAS System
Profile of a hybrid fibre cable
I 13
With our new Omni Antenna series for ceiling mounting, you
have the possibility to choose between different types of cover
plates, depending upon the type of suspension used for the
ceiling. We developed three different types to cover all possible
use-cases. The antenna module is always identical, but there
are different cover plates.
Solution 1
With a suspended ceiling made of polystyrene, rock wool or
plastic, there is no need to have a visible cover. You can use our
calibration ring to fix the antenna above the suspended ceiling.
Solution 2
With a suspended ceiling made of wood, plasterboard or similar
materials, you will require our small cover plate for a hole with a
diameter of 250 mm.
Solution 3
With a suspended ceiling made of metal, stainless steel or alu-
minium, you will require our large cover plate for a hole with a
diameter of 385 mm.
K-BOW I Antennas and Design
K-BOW is a next generation future-proof system.
With the pure fibre infrastructure between C-Hub,
E-Hub and RU, Kathrein is providing a system
which reduces costly additional cable installation
when an extension to future technologies and
adjusted traffic requirements is needed. Typically,
building infrastructures make use of universal
cabling, connecting radio, WiFi, IP and sensoring
networks.
K-BOW is based on a fibre cabling concept which
supports distances between the E-Hub and desig-
nated RUs of up to 3 km. Between C-Hub and E-Hub,
we support up to 20 km in distance.
This enables best-in-class applications for campus
or Micro C-RAN solutions in a dense urban high
traffic scenario.
By installing hybrid fibre cable (HFC), you have the
advantage of a thin flexible cable combined with the
option to reduce investments by a future-proof
broadband connection.
Cabling of a DAS System
Profile of a hybrid fibre cable
I 13
With our new Omni Antenna series for ceiling mounting, you
have the possibility to choose between different types of cover
plates, depending upon the type of suspension used for the
ceiling. We developed three different types to cover all possible
use-cases. The antenna module is always identical, but there
are different cover plates.
Solution 1
With a suspended ceiling made of polystyrene, rock wool or
plastic, there is no need to have a visible cover. You can use our
calibration ring to fix the antenna above the suspended ceiling.
Solution 2
With a suspended ceiling made of wood, plasterboard or similar
materials, you will require our small cover plate for a hole with a
diameter of 250 mm.
Solution 3
With a suspended ceiling made of metal, stainless steel or alu-
minium, you will require our large cover plate for a hole with a
diameter of 385 mm.
K-BOW I Antennas and Design
K-BOW is a next generation future-proof system.
With the pure fibre infrastructure between C-Hub,
E-Hub and RU, Kathrein is providing a system
which reduces costly additional cable installation
when an extension to future technologies and
adjusted traffic requirements is needed. Typically,
building infrastructures make use of universal
cabling, connecting radio, WiFi, IP and sensoring
networks.
K-BOW is based on a fibre cabling concept which
supports distances between the E-Hub and desig-
nated RUs of up to 3 km. Between C-Hub and E-Hub,
we support up to 20 km in distance.
This enables best-in-class applications for campus
or Micro C-RAN solutions in a dense urban high
traffic scenario.
By installing hybrid fibre cable (HFC), you have the
advantage of a thin flexible cable combined with the
option to reduce investments by a future-proof
broadband connection.
Cabling of a DAS System
Profile of a hybrid fibre cable
8 I Passive DAS I Application
8 | KATHREIN | Planungsbeispiel Passive-DAS
Um eine annähernd gleichmäßige HF-Leistungs-
verteilung auf jeder Etage eines 4-stöckigen Ge-
bäudes zu erreichen, werden unterschiedliche
Splitter und Tapper-Versionen eingesetzt.
Durch Auswahl der richtigen Komponenten kön-
nen die Dämpfungsverhältnisse exakt eingestellt
werden.
Die Darstellung zeigt eine schematische Be-
rechnung der benötigten Splitter und Tapper zur
gleichmäßigen Signalverteilung. Leitungsverluste
sind nicht berücksichtigt.
Signalverteilung in einem Passive-DAS
4-fach Splitter
-4 dB
-1 dB
-0,4 dB
-4 dB
-7 dB
-10 dB
4-fach Splitter
2-fach Splitter
2-fach Splitter
2-fach Tapper
2-fach Tapper3-fach Splitter
Serviceleistungen | KATHREIN | 9
KATHREIN bietet eine Vielzahl an Dienstleistungen rund
um ein Passive-DAS Projekt. Die große Erfahrung des
Innovations- und Technologieführers im Mobilfunk,
sowie die Einsatzbereitschaft eines motivierten und
engagierten Teams sind einzigartig. Planungs- und
Projekttechniker vor Ort, zusammen mit dem Kathrein
Service-Hub in Rosenheim, bilden die Basis unserer
Support-Einheit.
Top-Qualität ist ein Synonym für KATHREIN-Produkte
und diese Qualität findet sich auch in unseren Dienst-
leistungen. Wir helfen Ihnen bei der Realisierung Ihres
individuellen Passive-DAS Projektes.
Wir konzentrieren uns auf die Bedürfnisse unserer
Kunden und stellen unsere Unterstützung gerne zur
Verfügung - für kleine Sonderlösungen, wie auch für
Großprojekte. Wir kümmern uns um die Details, damit
Sie sich auf Ihre Schwerpunkte konzentrieren können.
Folgende Services werden angeboten:
Planung: Wir bieten Ihnen den kompletten Service von
der Machbarkeitsstudie über die technische Planung bis
zum verbindlichen Angebot.
Realisierung: Wir übernehmen für Sie das komplette
Projekt-Management mit Installations-Überwachung,
Inbetriebnahme und technischer Abnahme.
Material-Lieferung: Wir liefern sämtliche notwendigen
Materialien „turn-key“ und „on-time“ und stellen Ersatz-
teilversorgung und Reparatur-Service sicher.
Optimierung: Auch nach der Inbetriebnahme bieten wir
Ihnen Messungen (walk-tests), Ist-/Soll-Analysen und
Optimierungs-Konzepte an, damit Sie über viele Jahre
eine optimale Mobilfunk-Gebäudeversorgung nutzen
können.
Machbarkeitsstudie
Standortaufnahme
Technische Planung
Angebot
Lieferung auf Baustelle
Zubehör von Drittlieferanten
Ersatzteile
Reparaturservice
Projektmanagement
Installation
Inbetriebnahme
Technische Abnahme
Messungen / walk-tests
Ist-/Soll-Analyse
Optimierungs-Konzepte
KATHREIN Services für das Passive-DAS
PLANNING SERVICES IMPLEMENTATION SERVICES
MATERIAL SERVICES OPTIMISATION SERVICES
10 | KATHREIN | Datenblätter
Übersicht - Systemkomponenten
Datenblatt - Donor Antenne 11Datenblatt - Donor Antenne 12Datenblatt - Tappers & Splitters 13Datenblatt - Indoor Antenne 14Datenblatt - Indoor Antenne 15Datenblatt - Indoor Antenne 16Datenblatt - Indoor Antenne 17Datenblatt - Koaxialkabel 18
Datenblatt - Donor Antenne | KATHREIN | 11
1-Port LogPer 690–2690 67° 11dBi
Type No. 742192V02Frequency range MHz 690 – 880 880 – 960 960 – 1695 1695 – 2200 2200 – 2490 2490 – 2690
VSWR < 1.6 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5
Gain dBi 10.1 10.6 11.0 11.0 11.0 11.0
Impedance Ω 50 50 50 50 50 50
Polarization Vertical Vertical Vertical Vertical Vertical Vertical
Front-to-back ratio db > 25 > 25 > 25 > 25 > 22 > 25
Half-power beam widthhorizontalvertical
°6954
6453
5750
5348
4746
4544
Intermodulation IM3(2 x 43 dBm carrier)
dBc < –150 < –150 < –150 < –150 < –150 < –150
Max. power W 300 300 250 200 170 150Total power W 500 (at 50 °C ambient temperature)
742192V02 Page 1 of 2
936.
5038
/b
Sub
ject
to
alte
ratio
n.
1-Port Logarithmic PeriodicVertical PolarizationHalf-power Beam Width
690–2690
V
67°
690 – 1695 MHz
1695 – 2690 MHz
62°
3 dB
10
0
52°
3 dB
10
0
47°
3 dB
10
0
45°
3 dB
10
0
Horizontal Pattern
Horizontal Pattern
Vertical Pattern
Vertical Pattern
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
Mechanical specifi cations
Input 1 x 7-16 femaleConnector position BottomWind load(at Rated Wind Speed: 150 km/h)
N | lbf Frontal 20 | 4Lateral 210 | 47Rearside 30 | 7
Max. wind velocity km/hmph
241150
Height / width / depth mminches
300 / 155 / 78511.8 / 6.1 / 30.9
Weight kglb
5.512.1
Packing size mminches
360 x 175 x 100014.2 x 6.9 x 39.4
1-Port LogPer 690–2690 67° 11dBi
Type No. 742192V02Frequency range MHz 690 – 880 880 – 960 960 – 1695 1695 – 2200 2200 – 2490 2490 – 2690
VSWR < 1.6 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5
Gain dBi 10.1 10.6 11.0 11.0 11.0 11.0
Impedance Ω 50 50 50 50 50 50
Polarization Vertical Vertical Vertical Vertical Vertical Vertical
Front-to-back ratio db > 25 > 25 > 25 > 25 > 22 > 25
Half-power beam widthhorizontalvertical
°6954
6453
5750
5348
4746
4544
Intermodulation IM3(2 x 43 dBm carrier)
dBc < –150 < –150 < –150 < –150 < –150 < –150
Max. power W 300 300 250 200 170 150Total power W 500 (at 50 °C ambient temperature)
742192V02 Page 1 of 2
936.
5038
/b
Sub
ject
to
alte
ratio
n.
1-Port Logarithmic PeriodicVertical PolarizationHalf-power Beam Width
690–2690
V
67°
690 – 1695 MHz
1695 – 2690 MHz
62°
3 dB
10
0
52°
3 dB
10
0
47°
3 dB
10
0
45°
3 dB
10
0
Horizontal Pattern
Horizontal Pattern
Vertical Pattern
Vertical Pattern
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
Mechanical specifi cations
Input 1 x 7-16 femaleConnector position BottomWind load(at Rated Wind Speed: 150 km/h)
N | lbf Frontal 20 | 4Lateral 210 | 47Rearside 30 | 7
Max. wind velocity km/hmph
241150
Height / width / depth mminches
300 / 155 / 78511.8 / 6.1 / 30.9
Weight kglb
5.512.1
Packing size mminches
360 x 175 x 100014.2 x 6.9 x 39.4
1-Port Logarithmic Periodic 690–2690Vertical PolarizationHalf-power Beam Width 67°
Typ 742192V02
Frequency range [MHz] 690 – 880 880 – 960 960 – 1695 1695 – 2200 2200 – 2490 2490 – 2690
VSWR < 1.6 < 1.5 < 1.5 < 1.5 < 1.5 < 1.5
Gain [dBi] 10.1 10.6 11.0 11.0 11.0 11.0
Impedance [Ω] 50 50 50 50 50 50
Polarization Vertical Vertical Vertical Vertical Vertical Vertical
Front-to-back ratio [db] > 25 > 25 > 25 > 25 > 25 > 25
Half-power beam width [°]horizontal vertical
6954
6453
5750
5348
4746
4544
Intermodulation IM3(2 x 43 dBm carrier) [dBc]
< –150 < –150 < –150 < –150 < –150 < –150
Max. power [W] 300 300 250 200 170 150
Total power [W] 500 (at 50 °C ambient temperature)
Mechanical specifications
Input 1 x 7-16 female
Connector position bottom
Wind load (at Rated WindSpeed: 150 km/h) [N|lbf]
Frontal 20 | 4 Lateral 210 | 47 Rearside 30 | 7
Max. wind velocity [km/h] 241
Height / width / depth [mm] 300 / 155 / 785
Weight [kg] 5.5
Packing size [mm] 360 x 175 x 1000
1-Port LogPer 690–2690 67° 11dBi
Material: Radiator: Tin-plated copper. Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, color: Grey. All screws and nuts: Stainless steel
Mounting: The antenna can be mounted on
tubular mast with supplied clamps:
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
Any previous data sheet issues have now become invalid.Page 2 of 2 742192V02
936.
5038
/b
Sub
ject
to
alte
ratio
n.
AccessoriesGeneral Information
Material: Radiator: Tin-plated copper. Refl ector screen: Weather-proof aluminum. Radome: Fiberglass, color: Grey.All screws and nuts: Stainless steel
Mounting: The antenna can be mounted on tubular mast with supplied clamps:
Mast diametermm | inches
Wind speedkm/h | mph
30–70 | 1.2–2.848–70 | 1.9–2.8
< 200 | 124< 241 | 150
Recommended Torque: MA = 25 Nm.Please note: Kathrein does not recommend to use counter nuts.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Pressure test: The antenna has passed a pressure test according to Offi cial Journal of the European Communities L245/171 from 12.09.2002 for the use of the antenna in train tunnels for high speed railways.During test the antenna was subject to alternating pressure with a number of 1x106 alternations of load.The antenna exceeds the standard as follows:Pressure difference according to L245/171: 10 kPaPressure difference during test: 20 kPa
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
All dimensions in mm / inches
Any previous data sheet issues have now become invalid.Page 2 of 2 742192V02
936.
5038
/b
Sub
ject
to
alte
ratio
n.
AccessoriesGeneral Information
Material: Radiator: Tin-plated copper. Refl ector screen: Weather-proof aluminum. Radome: Fiberglass, color: Grey.All screws and nuts: Stainless steel
Mounting: The antenna can be mounted on tubular mast with supplied clamps:
Mast diametermm | inches
Wind speedkm/h | mph
30–70 | 1.2–2.848–70 | 1.9–2.8
< 200 | 124< 241 | 150
Recommended Torque: MA = 25 Nm.Please note: Kathrein does not recommend to use counter nuts.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Pressure test: The antenna has passed a pressure test according to Offi cial Journal of the European Communities L245/171 from 12.09.2002 for the use of the antenna in train tunnels for high speed railways.During test the antenna was subject to alternating pressure with a number of 1x106 alternations of load.The antenna exceeds the standard as follows:Pressure difference according to L245/171: 10 kPaPressure difference during test: 20 kPa
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
All dimensions in mm / inches
Any previous data sheet issues have now become invalid.Page 2 of 2 742192V02
936.
5038
/b
Sub
ject
to
alte
ratio
n.
AccessoriesGeneral Information
Material: Radiator: Tin-plated copper. Refl ector screen: Weather-proof aluminum. Radome: Fiberglass, color: Grey.All screws and nuts: Stainless steel
Mounting: The antenna can be mounted on tubular mast with supplied clamps:
Mast diametermm | inches
Wind speedkm/h | mph
30–70 | 1.2–2.848–70 | 1.9–2.8
< 200 | 124< 241 | 150
Recommended Torque: MA = 25 Nm.Please note: Kathrein does not recommend to use counter nuts.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Pressure test: The antenna has passed a pressure test according to Offi cial Journal of the European Communities L245/171 from 12.09.2002 for the use of the antenna in train tunnels for high speed railways.During test the antenna was subject to alternating pressure with a number of 1x106 alternations of load.The antenna exceeds the standard as follows:Pressure difference according to L245/171: 10 kPaPressure difference during test: 20 kPa
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
All dimensions in mm / inches
Mast diameter [mm] Wind speed [km/h]
30–70 < 200
48–70 < 241
12 | KATHREIN | Donor Antenne
1-Port BiDir Antenna 694–960 / 1710–2690Vertical PolarizationHalf-power Beam Width 65°
Typ 738447 738448
Input 1 x 7-16 female 1 x N female
Frequency range [MHz] 694 – 960, 1710 – 2690
VSWR 694 – 960 MHz: < 2.01710 – 2690 MHz: < 1.7
Gain [dBi] 694 – 806 MHz: 5.0 806 – 960 MHz: 5.51710 – 2690 MHz: 6.5
Impedance [Ω] 50
Polarization Vertical
Intermodulation IM3 [dBc] < –150 ( 2 x 43 dBm carrier)
Total power [W] 200 (at 50 °C ambient temperature)
Weight [kg] 1.1
Wind load (at 150 km/h) [N|lbf] Frontal: 30 | 7 Lateral: 70 | 16 Rearside: 35 | 8
Max. wind velocity [km/h] 200
Packing size [mm] 450 x 205 x 110
Height/width/depth [mm] 428 / 180 / 79
Fire load [kWh] 4.46
Type No. Description Mast diameter [mm]
approx. Weight [g]
Units per antenna
734360 2 clamps 34 – 60 60 1
734361 2 clamps 60 – 80 70 1
734362 2 clamps 80 – 100 80 1
734363 2 clamps 100 – 120 90 1
734364 2 clamps 120 – 140 110 1
734365 2 clamps 45 – 125 80 1
1-Port BiDir 694–960/1710–2690 65° 5dBi
Accessories (order separately)
Material: Radiator: Tin-plated copper.
Reflector screen: Weather-proof aluminum.
Radome: High impact plastic, color: Grey.
All screws and nuts: Stainless steel
Mounting: Wall mounting: No additional mounting kit needed.
For pipe mast mounting use clamps (Accessories list).
Ice protection: The radiating system is protected by the radome.
Due to its very sturdy construction, the antenna
remains operational even under icy conditions.
Grounding: All metal parts of the antenna as well as
the inner conductor are DC grounded.
Any previous data sheet issues have now become invalid.Page 2 of 2 742192V02
936.
5038
/b
Sub
ject
to
alte
ratio
n.
AccessoriesGeneral Information
Material: Radiator: Tin-plated copper. Refl ector screen: Weather-proof aluminum. Radome: Fiberglass, color: Grey.All screws and nuts: Stainless steel
Mounting: The antenna can be mounted on tubular mast with supplied clamps:
Mast diametermm | inches
Wind speedkm/h | mph
30–70 | 1.2–2.848–70 | 1.9–2.8
< 200 | 124< 241 | 150
Recommended Torque: MA = 25 Nm.Please note: Kathrein does not recommend to use counter nuts.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Pressure test: The antenna has passed a pressure test according to Offi cial Journal of the European Communities L245/171 from 12.09.2002 for the use of the antenna in train tunnels for high speed railways.During test the antenna was subject to alternating pressure with a number of 1x106 alternations of load.The antenna exceeds the standard as follows:Pressure difference according to L245/171: 10 kPaPressure difference during test: 20 kPa
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
All dimensions in mm / inches
Any previous data sheet issues have now become invalid.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
936.
4670
/d
Sub
ject
to
alte
ratio
n.
738447, 738448 Page 1 of 1
1-Port BiDir AntennaVertical PolarizationHPBW
694–960/1710–2690
V
65°
Bd
10
3
0
Bd
70°
10
3
0
Bd
10
3
0
55°
Horizontal Pattern Vertical Pattern694–960 MHz
Vertical Pattern1710–2690 MHz
1-Port BiDir 694–960/1710–2690 65° 5dBi
Type No. 738447 738448Input 1 x 7-16 female 1 x N femaleFrequency range MHz 694 – 960, 1710 – 2690VSWR 694 – 960 MHz: < 2.0
1710 – 2690 MHz: < 1.7Gain dBi 694 – 806 MHz: 5.0
806 – 960 MHz: 5.51710 – 2690 MHz: 6.5
Impedance Ω 50Polarization VerticalIntermodulation IM3 dBc < –150 ( 2 x 43 dBm carrier)Max. power (total) W 200 (at 50 °C ambient temperature)Weight kg
lb1.12.4
Wind load(at 150 km/h)
N | lbf Frontal: 30 | 7Lateral: 70 | 16Rearside: 35 | 8
Max. wind velocity km/hmph
200124
Packing size mminches
450 x 205 x 11017.7 x 8.1 x 4.3
Height/width/depth mminches
428 / 180 / 7916.9 / 7.1 / 3.1
Fire load kWh 4.46
Material: Radiator: Tin-plated copper.Refl ector: Weather-proof aluminum. Radome: High impact plastic, color: Grey.All screws and nuts: Stainless steel.
Mounting: Wall mounting: No additional mounting kit needed.For pipe mast mounting use clamps listed below (order separately).
Ice protection: The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
All dimensions in mm | inches
79 | 3.1
371
| 14.
6
400
| 15.
7
428
| 16.
9
180 | 7.1
8.5
| 0.
33
Accessories (order separately)
Type No. Description Mast diametermm | inches
Weightapprox. g | lb
Units perantenna
734360 2 clamps 34 – 60 | 1.3 – 2.4 60 | 0.13 1734361 2 clamps 60 – 80 | 2.4 – 3.1 70 | 0.15 1734362 2 clamps 80 – 100 | 3.1 – 3.9 80 | 0.18 1734363 2 clamps 100 – 120 | 3.9 – 4.7 90 | 0.20 1734364 2 clamps 120 – 140 | 4.7 – 5.5 110 | 0.24 1734365 2 clamps 45 – 125 | 1.8 – 4.9 80 | 0.18 1
Any previous data sheet issues have now become invalid.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
936.
4670
/d
Sub
ject
to
alte
ratio
n.
738447, 738448 Page 1 of 1
1-Port BiDir AntennaVertical PolarizationHPBW
694–960/1710–2690
V
65°
Bd
10
3
0
Bd
70°
10
3
0
Bd
10
3
0
55°
Horizontal Pattern Vertical Pattern694–960 MHz
Vertical Pattern1710–2690 MHz
1-Port BiDir 694–960/1710–2690 65° 5dBi
Type No. 738447 738448Input 1 x 7-16 female 1 x N femaleFrequency range MHz 694 – 960, 1710 – 2690VSWR 694 – 960 MHz: < 2.0
1710 – 2690 MHz: < 1.7Gain dBi 694 – 806 MHz: 5.0
806 – 960 MHz: 5.51710 – 2690 MHz: 6.5
Impedance Ω 50Polarization VerticalIntermodulation IM3 dBc < –150 ( 2 x 43 dBm carrier)Max. power (total) W 200 (at 50 °C ambient temperature)Weight kg
lb1.12.4
Wind load(at 150 km/h)
N | lbf Frontal: 30 | 7Lateral: 70 | 16Rearside: 35 | 8
Max. wind velocity km/hmph
200124
Packing size mminches
450 x 205 x 11017.7 x 8.1 x 4.3
Height/width/depth mminches
428 / 180 / 7916.9 / 7.1 / 3.1
Fire load kWh 4.46
Material: Radiator: Tin-plated copper.Refl ector: Weather-proof aluminum. Radome: High impact plastic, color: Grey.All screws and nuts: Stainless steel.
Mounting: Wall mounting: No additional mounting kit needed.For pipe mast mounting use clamps listed below (order separately).
Ice protection: The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
All dimensions in mm | inches
79 | 3.1
371
| 14.
6
400
| 15.
7
428
| 16.
9
180 | 7.1
8.5
| 0.
33
Accessories (order separately)
Type No. Description Mast diametermm | inches
Weightapprox. g | lb
Units perantenna
734360 2 clamps 34 – 60 | 1.3 – 2.4 60 | 0.13 1734361 2 clamps 60 – 80 | 2.4 – 3.1 70 | 0.15 1734362 2 clamps 80 – 100 | 3.1 – 3.9 80 | 0.18 1734363 2 clamps 100 – 120 | 3.9 – 4.7 90 | 0.20 1734364 2 clamps 120 – 140 | 4.7 – 5.5 110 | 0.24 1734365 2 clamps 45 – 125 | 1.8 – 4.9 80 | 0.18 1
Any previous data sheet issues have now become invalid.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
936.
4670
/d
Sub
ject
to
alte
ratio
n.
738447, 738448 Page 1 of 1
1-Port BiDir AntennaVertical PolarizationHPBW
694–960/1710–2690
V
65°
Bd
10
3
0
Bd
70°
10
3
0
Bd
10
3
0
55°
Horizontal Pattern Vertical Pattern694–960 MHz
Vertical Pattern1710–2690 MHz
1-Port BiDir 694–960/1710–2690 65° 5dBi
Type No. 738447 738448Input 1 x 7-16 female 1 x N femaleFrequency range MHz 694 – 960, 1710 – 2690VSWR 694 – 960 MHz: < 2.0
1710 – 2690 MHz: < 1.7Gain dBi 694 – 806 MHz: 5.0
806 – 960 MHz: 5.51710 – 2690 MHz: 6.5
Impedance Ω 50Polarization VerticalIntermodulation IM3 dBc < –150 ( 2 x 43 dBm carrier)Max. power (total) W 200 (at 50 °C ambient temperature)Weight kg
lb1.12.4
Wind load(at 150 km/h)
N | lbf Frontal: 30 | 7Lateral: 70 | 16Rearside: 35 | 8
Max. wind velocity km/hmph
200124
Packing size mminches
450 x 205 x 11017.7 x 8.1 x 4.3
Height/width/depth mminches
428 / 180 / 7916.9 / 7.1 / 3.1
Fire load kWh 4.46
Material: Radiator: Tin-plated copper.Refl ector: Weather-proof aluminum. Radome: High impact plastic, color: Grey.All screws and nuts: Stainless steel.
Mounting: Wall mounting: No additional mounting kit needed.For pipe mast mounting use clamps listed below (order separately).
Ice protection: The radiating system is protected by the radome. Due to its very sturdy construction, the antenna remains operational even under icy conditions.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
All dimensions in mm | inches
79 | 3.1
371
| 14.
6
400
| 15.
7
428
| 16.
9
180 | 7.1
8.5
| 0.
33
Accessories (order separately)
Type No. Description Mast diametermm | inches
Weightapprox. g | lb
Units perantenna
734360 2 clamps 34 – 60 | 1.3 – 2.4 60 | 0.13 1734361 2 clamps 60 – 80 | 2.4 – 3.1 70 | 0.15 1734362 2 clamps 80 – 100 | 3.1 – 3.9 80 | 0.18 1734363 2 clamps 100 – 120 | 3.9 – 4.7 90 | 0.20 1734364 2 clamps 120 – 140 | 4.7 – 5.5 110 | 0.24 1734365 2 clamps 45 – 125 | 1.8 – 4.9 80 | 0.18 1
Datenblatt - Tappers & Splitters | KATHREIN | 13
Any previous data sheet issues have now become invalid. 86020136, ... Page 1 of 1
936.
5133
S
ubje
ct t
o al
tera
tion.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
For indoor and outdoor use.
Low-loss Power TappersMulti-band
694–2700
2-way Tapper 694–2700 7.0 /1.0dB2-way Tapper 694–2700 10.4/0.4dB2-way Tapper 694–2700 15.1/0.1dB
Type No. 86020136 86020137 86020138Frequency range MHz 694 – 2700 MHzTap LossInput ↔ P1Input ↔ P2
dB– 1.0– 7.0
– 0.4– 10.4
– 0.1– 15.1
For connecting ... antennas 2Insertion loss dB < 0.05Impedance Ω 50VSWR 694 – 790 MHz: < 2.0
790 – 2500 MHz: < 1.52500 – 2700 MHz: < 2.0
Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connectors 4.3-10 femaleWeight g
lb5001.1
Profi le cross-section mminches
25 x 251.0 x 1.0
Packing size mminches
253 x 73 x 9210.0 x 2.9 x 3.6
Max. size mminches
247 / 66 / 259.7 / 2.6 / 1.0
Material: Housing: Aluminum.Inner conductor: Brass.
DC capability: DC transmission only between input and port P1.P2 is coupled capacitively.
Environmental conditions: IP 65
P2
P1
Input
86020138
Any previous data sheet issues have now become invalid. 86020017, ... Page 1 of 1
936.
5126
S
ubje
ct t
o al
tera
tion.
For indoor and outdoor use.
Low-loss Power SplittersMulti-band
694–3800
2-way Splitter 694–38003-way Splitter 694–38004-way Splitter 694–3800
Type No. 86020017 86020018 86020019Frequency range MHz 694 – 3800For connecting ... antennas 2 3 4Insertion loss dB < 0.05Impedance Ω 50VSWR 694–2100 MHz
2100–2700 MHz2700–3800 MHz
< 1.3< 1.3< 1.5
< 1.3< 1.4< 1.5
< 1.3< 1.3< 1.6
Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier)Max. power W 100 (at 50 °C ambient temperature)Connector 4.3-10 femaleWeight kg
lb0.420.93
0.450.99
0.481.06
Profi le cross-section mminches
25 x 251.0 x 1.0
Packing size mminches
248 x 73 x 869.8 x 2.9 x 3.4
Max. size mminches
237 / 66 / 469.3 / 2.6 / 1.8
Material: Housing: Aluminum.Inner conductor: Brass.
DC capability: DC transmission between all terminations (suitbale for remote power supply systems).
Environmental conditions: IP 65
Input
86020019
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.comAny previous data sheet issues have now become invalid.86020017, ... Page 1 of 1
936.5126 Subject to alteration.
For indoor and outdoor use.
Low-loss Power SplittersMulti-band
694–3800
2-way Splitter 694–38003-way Splitter 694–38004-way Splitter 694–3800
Type No.860200178602001886020019Frequency rangeMHz694 – 3800For connecting ... antennas234Insertion lossdB< 0.05ImpedanceΩ50VSWR 694–2100 MHz
2100–2700 MHz2700–3800 MHz
< 1.3< 1.3< 1.5
< 1.3< 1.4< 1.5
< 1.3< 1.3< 1.6
Intermodulation IM3dBc< –150 (2 x 43 dBm carrier)Max. powerW100 (at 50 °C ambient temperature)Connector4.3-10 femaleWeightkg
lb0.420.93
0.450.99
0.481.06
Profi le cross-sectionmminches
25 x 251.0 x 1.0
Packing sizemminches
248 x 73 x 869.8 x 2.9 x 3.4
Max. sizemminches
237 / 66 / 469.3 / 2.6 / 1.8
Material:Housing: Aluminum.Inner conductor: Brass.
DC capability:DC transmission between all terminations (suitbale for remote power supply systems).
Environmental conditions:IP 65
Input
86020019
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
Low-loss Power Tappers 694–2700Multi-band
Low-loss Power Splitters 694–3800Multi-band
Typ 86020136 86020137 86020138
Frequency range [MHz] 694 – 2700
Tap Loss [dB]Input - P1Input - P2
– 1.0– 7.0
– 0.4– 10.4
– 0.1– 15.1
For connecting ... antennas 2
Insertion loss [dB] < 0.05
Impedance [Ω] 50
VSWR694 – 790 MHz: < 2.0790 – 2500 MHz: < 1.52500 – 2700 MHz: < 2.0
Intermodulation IM3 [dBc] < –150 (2 x 43 dBm carrier)
Max. power [W] 100 (at 50 °C ambient temperature)
Connectors 4.3-10 female
Weight [g] 500
Profile cross-section [mm] 25 x 25
Packing size [mm] 253 x 73 x 92
Max. size [mm] 247 / 66 / 25
Typ 86020017 86020018 86020019
Frequency range [MHz] 694 – 3800
For connecting ... antennas 2 3 4
Insertion loss [dB] < 0.05
Impedance [Ω] 50
VSWR 694–2100 MHz 2100–2700 MHz 2700–3800 MHz
< 1.3< 1.3< 1.5
< 1.3< 1.4< 1.5
< 1.3< 1.3< 1.6
Intermodulation IM3 [dBc] < –150 (2 x 43 dBm carrier)
Max. power [W] 100 (at 50 °C ambient temperature)
Connectors 4.3-10 female
Weight [g] 420 450 480
Profile cross-section [mm] 25 x 25
Packing size [mm] 248 x 73 x 86
Max. size [mm] 237 / 66 / 46
2-way Tapper 694–2700 7.0 /1.0dB 2-way Tapper 694–2700 10.4/0.4dB 2-way Tapper 694–2700 15.1/0.1dB
2-way Splitter 694–38003-way Splitter 694–38004-way Splitter 694–3800
For indoor and outdoor use.
For indoor and outdoor use.
Material: Housing: Aluminum.
Inner conductor: Brass.
DC capability: DC transmission only between input
and port P1.P2 is coupled capacitively.
Environmental conditions: IP 65
Material: Housing: Aluminum.
Inner conductor: Brass.
DC capability: DC transmission between all
terminations (suitbale for remote
power supply systems).
Environmental conditions: IP 65
14 | KATHREIN | Datenblatt - Indoor Antenne
1-Port Indoor 790–960 / 1425–3800 / 5150–6000Omni AntennaVertical Polarization
Typ 80020249
Frequency range [MHz]790 – 960
1425 – 38005150 – 6000
VSWR
790 – 806 MHz: < 1.7 806 – 960 MHz: < 1.51425 – 1710 MHz: < 2.01710 – 2200 MHz: < 1.42200 – 3800 MHz: < 1.65150 – 5300 MHz: < 2.45300 – 6000 MHz: < 2.0
Gain [dBi] ≈ 2
Impedance [Ω] 50
Polarization Vertical
Intermodulation IM3 [dBc] 790 – 960 MHz: < –140 (2 x 40 dBm carrier)1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)
5150 – 6000 MHz: not relevant
Total power [W] 50 (at 50 °C ambient temperature)
Input 1 x 4.3-10 female
Protection class IP 30
Weight [g] 500
Packing size [mm] 278 x 278 x 171
Diameter [mm] 258
Height [mm] 94 (without connector)
Fire load [kWh] 2.12
1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi
The antenna can be operated in all frequency rangessimultaneously and needs no additional groundplane.
Material: Reflector: Aluminum.
Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied.
For the 4.3-10 connector a hole in the ceilingwith a diameter of 35 mm is required.
Available accessories: Broadband power splitters and tappers.
Any
pre
vio
us d
ata
shee
t is
sues
hav
e no
w b
eco
me
inva
lid.
Pag
e 2
of 2
74
2192
V02
936.5038/b Subject to alteration.
Acc
esso
ries
Gen
eral
Info
rmat
ion
Mat
eria
l:R
adia
tor:
Tin
-pla
ted
cop
per
. Refl
ect
or
scre
en: W
eath
er-p
roof
alu
min
um.
Rad
om
e: F
iber
glas
s, c
olor
: Gre
y.A
ll sc
rew
s an
d n
uts:
Sta
inle
ss s
teel
Mo
unti
ng:
The
ante
nna
can
be
mou
nted
on
tub
ular
mas
t w
ith s
upp
lied
cla
mp
s:
Mas
t d
iam
eter
mm
| in
ches
Win
d s
pee
dkm
/h |
mp
h
30–
70 |
1.2
–2.
848
–70
| 1.
9–
2.8
< 2
00 |
124
< 2
41 |
150
Rec
omm
end
ed T
orq
ue: M
A =
25
Nm
.P
leas
e no
te: K
athr
ein
do
es n
ot
reco
mm
end
to
use
co
unte
r nu
ts.
Gro
und
ing
:A
ll m
etal
par
ts o
f the
ant
enna
as
wel
l as
the
inne
r co
nduc
tor
are
DC
gro
und
ed.
Env
iro
nmen
tal t
ests
:K
athr
ein
ante
nnas
hav
e p
asse
d e
nviro
nmen
tal t
ests
as
reco
mm
end
ed
in E
TS 3
00 0
19-2
-4. T
he h
omog
enou
s d
esig
n of
Kat
hrei
n’s
ante
nna
fam
ilies
use
iden
tical
mod
ules
and
mat
eria
ls. E
xten
sive
tes
ts h
ave
bee
n p
erfo
rmed
on
typ
ical
sam
ple
s an
d m
odul
es.
Pre
ssur
e te
st:
The
ante
nna
has
pas
sed
a p
ress
ure
test
acc
ord
ing
to O
ffi ci
al J
ourn
al o
f th
e E
urop
ean
Com
mun
ities
L24
5/17
1 fr
om 1
2.09
.200
2 fo
r th
e us
e of
the
an
tenn
a in
tra
in t
unne
ls fo
r hi
gh s
pee
d r
ailw
ays.
Dur
ing
test
the
ant
enna
was
sub
ject
to
alte
rnat
ing
pre
ssur
e w
ith a
num
ber
of
1x1
06 a
ltern
atio
ns o
f loa
d.
The
ante
nna
exce
eds
the
stan
dar
d a
s fo
llow
s:P
ress
ure
diff
eren
ce a
ccor
din
g to
L24
5/17
1: 1
0 kP
aP
ress
ure
diff
eren
ce d
urin
g te
st:
20 k
Pa
KAT
HR
EIN
-Wer
ke K
G ·
Ant
on-K
athr
ein-
Str
aße
1-3
· P.O
. Box
10
04 4
4 · 8
3004
RO
SE
NH
EIM
· G
ER
MA
NY
· P
hone
+49
803
1 18
4-0
· Fax
+49
803
1 18
4-82
0
ww
w.k
athr
ein.
com
All
dim
ensi
ons
in m
m /
inch
es
Any previous data sheet issues have now become invalid.
936.
5120
/a
Sub
ject
to
alte
ratio
n.
1-Port IndoorOmni AntennaVertical Polarization
790–960 1425–3800 5150–6000
V
1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi
Type No. 80020249Frequency range MHz 790 – 960
1425 – 38005150 – 6000
Polarization VerticalGain, typ. dBi ≈ 2Impedance Ω 50VSWR 790 – 806 MHz: < 1.7
806 – 960 MHz: < 1.51425 – 1710 MHz: < 2.01710 – 2200 MHz: < 1.42200 – 3800 MHz: < 1.65150 – 5300 MHz: < 2.45300 – 6000 MHz: < 2.0
Intermodulation IM3 dBc 790 – 960 MHz: < –140 (2 x 40 dBm carrier)1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)5150 – 6000 MHz: not relevant
Max. power W 50 (at 50 °C ambient temperature)Input 1 x 4.3-10 femaleProtection class IP 30Weight g
lbApprox. 500Approx. 1.1
Packing size mminches
278 x 278 x 17110.9 x 10.9 x 6.7
Diameter mminches
25810.2
Height mminches
94 (without connector)3.7 (without connector)
Fire load kWh 2.12
Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White. Additional painting is possible.
Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the 4.3-10 connector a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.
Available accessories: Broadband power splitters and tappers.
4.3-10 connector, female
Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws.
3 ho
les
dia.
5 m
m3
hole
s di
a. 0
.2 in
ches
dia.
160
mm
dia.
6.3
inch
es
min. Ø 35 mmmin. Ø 1.4 inches
∅ 258 mm | 10.2 inches
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com 80020249 Page 1 of 1
■ The antenna can be operated in all frequency ranges simultaneously.
■ The antenna needs no additional groundplane.
Any previous data sheet issues have now become invalid.
936.
5120
/a
Sub
ject
to
alte
ratio
n.
1-Port IndoorOmni AntennaVertical Polarization
790–960 1425–3800 5150–6000
V
1-Port Indoor 790–960/1425–3800/5150–6000 360° 2dBi
Type No. 80020249Frequency range MHz 790 – 960
1425 – 38005150 – 6000
Polarization VerticalGain, typ. dBi ≈ 2Impedance Ω 50VSWR 790 – 806 MHz: < 1.7
806 – 960 MHz: < 1.51425 – 1710 MHz: < 2.01710 – 2200 MHz: < 1.42200 – 3800 MHz: < 1.65150 – 5300 MHz: < 2.45300 – 6000 MHz: < 2.0
Intermodulation IM3 dBc 790 – 960 MHz: < –140 (2 x 40 dBm carrier)1710 – 3800 MHz: < –140 (2 x 40 dBm carrier)5150 – 6000 MHz: not relevant
Max. power W 50 (at 50 °C ambient temperature)Input 1 x 4.3-10 femaleProtection class IP 30Weight g
lbApprox. 500Approx. 1.1
Packing size mminches
278 x 278 x 17110.9 x 10.9 x 6.7
Diameter mminches
25810.2
Height mminches
94 (without connector)3.7 (without connector)
Fire load kWh 2.12
Material: Refl ector: Aluminum.Radome: High impact polystyrol, colour: White. Additional painting is possible.
Mounting: Three holes in the base enable a mounting on the ceiling. Two types of screws are supplied. For the 4.3-10 connector a hole in the ceiling with a diameter of 35 mm | 1.4 inches is required.
Available accessories: Broadband power splitters and tappers.
4.3-10 connector, female
Clip the protective housing into position after the antenna has been mounted with the help of the three supplied screws.
3 ho
les
dia.
5 m
m3
hole
s di
a. 0
.2 in
ches
dia.
160
mm
dia.
6.3
inch
es
min. Ø 35 mmmin. Ø 1.4 inches
∅ 258 mm | 10.2 inches
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com 80020249 Page 1 of 1
■ The antenna can be operated in all frequency ranges simultaneously.
■ The antenna needs no additional groundplane.
Any p
revious d
ata sheet issues have now
beco
me invalid
.
936.5120/a Subject to alteration. 1-Po
rt Indo
or
Om
ni Antenna
Vertical Po
larization
790–
9601425
–3800
5150–
6000
V
1-Po
rt Indo
or 790–960/1425–3800/5150–6000 360° 2d
Bi
Type N
o.
80020249Freq
uency rangeM
Hz
790 – 9601425 – 38005150 – 6000
Polarization
VerticalG
ain, typ.
dB
i≈ 2
Imp
edance
Ω50
VS
WR
790 – 806 MH
z: < 1.7
806 – 960 MH
z: < 1.5
1425 – 1710 MH
z: < 2.0
1710 – 2200 MH
z: < 1.4
2200 – 3800 MH
z: < 1.6
5150 – 5300 MH
z: < 2.4
5300 – 6000 MH
z: < 2.0
Intermod
ulation IM3
dB
c790 –
960 MH
z: < –140 (2 x 40 d
Bm
carrier)1710 – 3800 M
Hz: <
–140 (2 x 40 dB
m carrier)
5150 – 6000 MH
z: not relevantM
ax. pow
erW
50 (at 50 °C am
bient tem
perature)
Input
1 x 4.3-10 female
Protection class
IP 30
Weight
glbA
pp
rox. 500A
pp
rox. 1.1P
acking sizem
minches
278 x 278 x 17110.9 x 10.9 x 6.7
Diam
eterm
minches
25810.2
Height
mm
inches94 (w
ithout connector)3.7 (w
ithout connector)Fire load
kWh
2.12
Material:
Refl ector: A
luminum
.R
adom
e: High im
pact p
olystyrol, colour: White.
Ad
ditional p
ainting is possib
le.
Mounting:
Three holes in the base enab
le a mounting on
the ceiling. Two typ
es of screws are sup
plied
. For the 4.3-10 connector a hole in the ceiling w
ith a diam
eter of 35 mm
| 1.4 inches is required
.
Availab
le accessories:B
roadb
and p
ower sp
litters and tap
pers.
4.3-10 connector, female
Clip
the protective housing into p
osition after the antenna has b
een mounted
with
the help of the three sup
plied
screws.
3 holes dia. 5 mm3 holes dia. 0.2 inches
dia. 160 mmdia. 6.3 inches
min. Ø
35 mm
min. Ø
1.4 inches
∅ 258 m
m | 10.2 inches
KATH
RE
IN-W
erke KG
· Anton-K
athrein-Straße 1-3 · P.O
. Box 10 04 44 · 83004 R
OS
EN
HE
IM · G
ER
MA
NY
· Phone +
49 8031 184-0 · Fax +49 8031 184-820
ww
w.kathrein.com
80020249 Page 1 of 1
■ The antenna can be op
erated in all freq
uency ranges sim
ultaneously.■ The antenna need
s no add
itional groundp
lane.
Datenblatt - Indoor Antenne | KATHREIN | 15
2-Port Indoor 694–5920 / 694–5920MIMO Omni AntennaVertical Polarization
Typ 80010712
Frequency rangePort 1 and Port 2 [MHz]
Port 1694 – 960
1427 – 15181695 – 26903400 – 38004920 – 5920
Port 2694 – 960
1427 – 15181695 – 26903400 – 38004920 – 5920
VSWR
694 – 960 MHz: < 2.01427 – 1518 MHz: < 2.01695 – 2690 MHz: < 2.03400 – 3800 MHz: < 2.04920 – 5920 MHz: < 2.0
Gain, typ. [dBi] 2
Gain, max. [dBi]
694 – 960 MHz: 4.0 – 5.51427 – 1518 MHz: 5.0 – 5.51695 – 2690 MHz: 5.0 – 7.53400 – 3800 MHz: 5.5 – 7.04920 – 5920 MHz: 7.0 – 8.0
Impedance [Ω] 50
Polarization Dual Vertical
Intermodulation IM3 (2 x 40 dBm carrier) [dBc]
694 – 960 MHz: < –1501427 – 1518 MHz: < –1501695 – 2690 MHz: < –1503400 – 3800 MHz: < –150
4920 – 5920 MHz: not relevant
Isolation [dB]
694 – 960 MHz: > 201427 – 1518 MHz: > 201695 – 2690 MHz: > 203400 – 3800 MHz: > 204920 – 5920 MHz: > 20
Max. power per input(at 50 °C ambienttemperature) [W]
694 – 960 MHz: 20 1427 – 1518 MHz: 20 1695 – 2690 MHz: 20 3400 – 3800 MHz: 10 4920 – 5920 MHz: 5
Max. effektive powerfor the antenna [W]
20(at 50 °C ambient temperature)
Input 2 x 4.3-10 female(angular connector required)
Protection class IP 30
Weight [g] 950
Packing size [mm] 350 x 350 x 150
Diameter (antenna module) [mm] 320
Height (antenna module) [mm] 89
Fire load [kWh] 3.18
2-Port Indoor 694–5920 360° 2dBiThe antenna can be operated in all indicated frequency ranges simultaneously.
Material: Reflector: Aluminum.
Radome: ASA/PC blend, colour: White.
Additional painting is possible.
Mounting: - On-ceiling mounting: Mounting kit 85010200 required
- Concealed antenna installation (ceiling thickness 3-35 mm):
Mounting kit 85010201 required
- Hidden antenna installation in double layer ceiling,
floors or similar
Any
pre
vio
us d
ata
shee
t is
sues
hav
e no
w b
eco
me
inva
lid.
Pag
e 2
of 2
74
2192
V02
936.5038/b Subject to alteration.
Acc
esso
ries
Gen
eral
Info
rmat
ion
Mat
eria
l:R
adia
tor:
Tin
-pla
ted
cop
per
. Refl
ect
or
scre
en: W
eath
er-p
roof
alu
min
um.
Rad
om
e: F
iber
glas
s, c
olor
: Gre
y.A
ll sc
rew
s an
d n
uts:
Sta
inle
ss s
teel
Mo
unti
ng:
The
ante
nna
can
be
mou
nted
on
tub
ular
mas
t w
ith s
upp
lied
cla
mp
s:
Mas
t d
iam
eter
mm
| in
ches
Win
d s
pee
dkm
/h |
mp
h
30–
70 |
1.2
–2.
848
–70
| 1.
9–
2.8
< 2
00 |
124
< 2
41 |
150
Rec
omm
end
ed T
orq
ue: M
A =
25
Nm
.P
leas
e no
te: K
athr
ein
do
es n
ot
reco
mm
end
to
use
co
unte
r nu
ts.
Gro
und
ing
:A
ll m
etal
par
ts o
f the
ant
enna
as
wel
l as
the
inne
r co
nduc
tor
are
DC
gro
und
ed.
Env
iro
nmen
tal t
ests
:K
athr
ein
ante
nnas
hav
e p
asse
d e
nviro
nmen
tal t
ests
as
reco
mm
end
ed
in E
TS 3
00 0
19-2
-4. T
he h
omog
enou
s d
esig
n of
Kat
hrei
n’s
ante
nna
fam
ilies
use
iden
tical
mod
ules
and
mat
eria
ls. E
xten
sive
tes
ts h
ave
bee
n p
erfo
rmed
on
typ
ical
sam
ple
s an
d m
odul
es.
Pre
ssur
e te
st:
The
ante
nna
has
pas
sed
a p
ress
ure
test
acc
ord
ing
to O
ffi ci
al J
ourn
al o
f th
e E
urop
ean
Com
mun
ities
L24
5/17
1 fr
om 1
2.09
.200
2 fo
r th
e us
e of
the
an
tenn
a in
tra
in t
unne
ls fo
r hi
gh s
pee
d r
ailw
ays.
Dur
ing
test
the
ant
enna
was
sub
ject
to
alte
rnat
ing
pre
ssur
e w
ith a
num
ber
of
1x1
06 a
ltern
atio
ns o
f loa
d.
The
ante
nna
exce
eds
the
stan
dar
d a
s fo
llow
s:P
ress
ure
diff
eren
ce a
ccor
din
g to
L24
5/17
1: 1
0 kP
aP
ress
ure
diff
eren
ce d
urin
g te
st:
20 k
Pa
KAT
HR
EIN
-Wer
ke K
G ·
Ant
on-K
athr
ein-
Str
aße
1-3
· P.O
. Box
10
04 4
4 · 8
3004
RO
SE
NH
EIM
· G
ER
MA
NY
· P
hone
+49
803
1 18
4-0
· Fax
+49
803
1 18
4-82
0
ww
w.k
athr
ein.
com
All
dim
ensi
ons
in m
m /
inch
es
936.
5360
/b
Sub
ject
to
alte
ratio
n.
2-Port IndoorMIMO Omni AntennaVertical Polarization
694–5920 694–5920
V V
2-Port Indoor 694–5920 360° 2dBi
Type No. 80010712Frequency rangePort 1 and Port 2
MHz Port 1 694 – 9601427 – 15181695 – 26903400 – 38004920 – 5920
Port 2 694 – 9601427 – 15181695 – 26903400 – 38004920 – 5920
Polarization Dual VerticalGain, typ. dBi 2Gain, max. dBi 694 – 960 MHz: 4.0 – 5.5
1427 – 1518 MHz: 5.0 – 5.51695 – 2690 MHz: 5.0 – 7.53400 – 3800 MHz: 5.5 – 7.04920 – 5920 MHz: 7.0 – 8.0
Impedance Ω 50VSWR 694 – 960 MHz: < 2.0
1427 – 1518 MHz: < 2.01695 – 2690 MHz: < 2.03400 – 3800 MHz: < 2.04920 – 5920 MHz: < 2.0
Isolation dB 694 – 960 MHz: > 201427 – 1518 MHz: > 201695 – 2690 MHz: > 203400 – 3800 MHz: > 204920 – 5920 MHz: > 20
Intermodulation IM3(2 x 40 dBm carrier)
dBc 694 – 960 MHz: < –1501427 – 1518 MHz: < –1501695 – 2690 MHz: < –1503400 – 3800 MHz: < –150
4920 – 5920 MHz: not relevantMax. power per input(at 50 °C ambient temperature)
W 694 – 960 MHz: 201427 – 1518 MHz: 201695 – 2690 MHz: 203400 – 3800 MHz: 104920 – 5920 MHz: 5
Max. effektive power for the antenna
W 20(at 50 °C ambient temperature)
Input 2 x 4.3-10 female(angular connector required)
Protection class IP 30Weight g
lb9502.1
Packing size mminches
350 x 350 x 15013.8 x 13.8 x 5.9
Diameter(antenna module)
mminches
32012.6
Height(antenna module)
mminches
893.5
Fire load kWh 3.18
Material: Refl ector: Aluminum.Radome: ASA/PC blend, colour: White. Additional painting is possible.
Mounting: – On-ceiling mounting:Mounting kit 85010200 required
– Concealed antenna installation (ceiling thickness 3 – 35 mm | 0.12 – 1.38 inches):Mounting kit 85010201 required
– Hidden antenna installation in double l ayer ceiling, fl oors or similar – no additional mounting kit required
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com 80010712 Page 1 of 4
Accessories (order separately if required)
Type No. Description
85010200 On-ceiling mounting kit85010201 Support ring for concealed antenna
installation
■ The antenna can be operated in all indicated frequency ranges simultaneously.
2-Port IndoorMIMO Omni AntennaVertical Polarization
694–5920 694–5920
V V
936.
5360
/b
Sub
ject
to
alte
ratio
n.
Antenna module:
44 | 1.7
284 | 11.2
320 | 12.6
43 |
1.7
89 |
3.5
All dimensions in mm | inches
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.comPage 2 of 4 80010712
2-Port IndoorMIMO Omni AntennaVertical Polarization
694–5920 694–5920
V V
105
| 4.1
Option 1:feeder cable
antenna module
on-ceilingmounting frame
Option 2:feeder cable
ceiling
All dimensions in mm | inches
On-ceiling mounting option:
ZZ
mechanical interface betweenantenna and mounting kit
feeder cablesangular connectorsrequired
85010200on ceilingmounting frame
screws5 | 0.2
(not included)
antenna module
Insert the antenna into the pre-assembled mounting tray 85010200and turn clockwise until it locks into place.
936.
5360
/b
Sub
ject
to
alte
ratio
n.
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com 80010712 Page 3 of 4
16 | KATHREIN | Datenblatt - Indoor Antenne
Indoor Multi-band 694–960 / 1710–2690Directional Antenna, Dual PolarizationHalf-power Beam Width (80° / 65°)Integrated Combiner
Typ 80010882
Frequency range [MHz] 694 – 960 1710 – 2690
Polarization [°] + 45, – 45 + 45, – 45
Gain [dBi] 7 7
Half-power beamwidth; hor., ver. [°]
typ. 80 typ. 65
VSWR 694 – 960 MHz: ≤ 2.21710 – 2690 MHz: ≤ 2.2
Impedance [Ω] 50
Isolation, betweenports [dB]
694 – 806 MHz: ≥ 16 806 – 960 MHz: ≥ 201710 – 2690 MHz: ≥ 20
Passive IntermodulationPIM 3 [dBc]
< –140 (at 2 x 40 dBm carrier)
Max. power per port [W] 20 (at 50 °C ambient temperature)
Input 2 x 4.3-10 female
Protection class IP 30
Weight [g] 1600
Packing size [mm] 417 / 281 / 141
Height/width/depth [mm] 399 / 237 / 63
Operating temperaturerange [°C]
– 5 … + 55
Fire protection classification UL 94-V2
Fire load [kWh] 5.3
2-Port Indoor 694–960/1710–2690 C 80°/65° 7dBi
Material: Reflector: Brass.
Radome: ASA / PC, colour: White.
Mounting: Position: Wall and ceiling possible. The antenna is mounted
with four screws (4.5 mm nominal diameter, screw head
diameter max. 9 mm). Screws are not supplied. After
antenna mounting install the antenna cover.
Available accessories: Broadband power splitters and tappers (380 – 5920 MHz).
Any
pre
vio
us d
ata
shee
t is
sues
hav
e no
w b
eco
me
inva
lid.
Pag
e 2
of 2
74
2192
V02
936.5038/b Subject to alteration.
Acc
esso
ries
Gen
eral
Info
rmat
ion
Mat
eria
l:R
adia
tor:
Tin
-pla
ted
cop
per
. Refl
ect
or
scre
en: W
eath
er-p
roof
alu
min
um.
Rad
om
e: F
iber
glas
s, c
olor
: Gre
y.A
ll sc
rew
s an
d n
uts:
Sta
inle
ss s
teel
Mo
unti
ng:
The
ante
nna
can
be
mou
nted
on
tub
ular
mas
t w
ith s
upp
lied
cla
mp
s:
Mas
t d
iam
eter
mm
| in
ches
Win
d s
pee
dkm
/h |
mp
h
30–
70 |
1.2
–2.
848
–70
| 1.
9–
2.8
< 2
00 |
124
< 2
41 |
150
Rec
omm
end
ed T
orq
ue: M
A =
25
Nm
.P
leas
e no
te: K
athr
ein
do
es n
ot
reco
mm
end
to
use
co
unte
r nu
ts.
Gro
und
ing
:A
ll m
etal
par
ts o
f the
ant
enna
as
wel
l as
the
inne
r co
nduc
tor
are
DC
gro
und
ed.
Env
iro
nmen
tal t
ests
:K
athr
ein
ante
nnas
hav
e p
asse
d e
nviro
nmen
tal t
ests
as
reco
mm
end
ed
in E
TS 3
00 0
19-2
-4. T
he h
omog
enou
s d
esig
n of
Kat
hrei
n’s
ante
nna
fam
ilies
use
iden
tical
mod
ules
and
mat
eria
ls. E
xten
sive
tes
ts h
ave
bee
n p
erfo
rmed
on
typ
ical
sam
ple
s an
d m
odul
es.
Pre
ssur
e te
st:
The
ante
nna
has
pas
sed
a p
ress
ure
test
acc
ord
ing
to O
ffi ci
al J
ourn
al o
f th
e E
urop
ean
Com
mun
ities
L24
5/17
1 fr
om 1
2.09
.200
2 fo
r th
e us
e of
the
an
tenn
a in
tra
in t
unne
ls fo
r hi
gh s
pee
d r
ailw
ays.
Dur
ing
test
the
ant
enna
was
sub
ject
to
alte
rnat
ing
pre
ssur
e w
ith a
num
ber
of
1x1
06 a
ltern
atio
ns o
f loa
d.
The
ante
nna
exce
eds
the
stan
dar
d a
s fo
llow
s:P
ress
ure
diff
eren
ce a
ccor
din
g to
L24
5/17
1: 1
0 kP
aP
ress
ure
diff
eren
ce d
urin
g te
st:
20 k
Pa
KAT
HR
EIN
-Wer
ke K
G ·
Ant
on-K
athr
ein-
Str
aße
1-3
· P.O
. Box
10
04 4
4 · 8
3004
RO
SE
NH
EIM
· G
ER
MA
NY
· P
hone
+49
803
1 18
4-0
· Fax
+49
803
1 18
4-82
0
ww
w.k
athr
ein.
com
All
dim
ensi
ons
in m
m /
inch
es
Any previous data sheet issues have now become invalid.
2-Port Indoor 694–960/1710–2690 C 80°/65° 7dBi
Type No. 80010882Frequency range MHz 694 – 960 1710 – 2690Polarization ° +45, –45 +45, –45Gain dBi 7 7Half-power beam width; hor., ver. ° typ. 80 typ. 65
Impedance Ω 50VSWR 694 – 960 MHz: ≤ 2.2
1710 – 2690 MHz: ≤ 2.2Isolation, between ports dB
694 – 806 MHz: ≥ 16 806 – 960 MHz: ≥ 201710 – 2690 MHz: ≥ 20
Max. power per port W 20 (at 50 °C ambient temperature)Passive Inter-modulation PIM 3 dBc < –140 (at 2 x 40 dBm carrier)
Input 2 x 4.3-10 femaleProtection class IP 30Weight kg 1.6Packing size mm 417 / 281 / 141Height/width/depth mm 399 / 237 / 63Operating temperature range °C –5 … +55
Fire protection classification UL 94-V2Fire load kWh 5.3
Material: Reflector: Brass.Radome: ASA / PC, colour: White.
Mounting: Position: Wall and ceiling possible.The antenna is mounted with four screws (4.5 mm nominal diameter, srew head dia meter max. 9 mm). Screws are not supplied. After antenna mounting install the antenna cover.
Available accessories: Broadband power splitters and tappers (380 – 5920 MHz).
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
936.
5144
/a
Sub
ject
to
alte
ratio
n.
80010882 Page 1 of 1
Indoor Multi-bandDirectional AntennaDual PolarizationHalf-power Beam WidthIntegrated Combiner
1710–2690694–960
XX
65°80°
C
3 dB
10
0
80°
3 dB
10
0
65°
Horizontal / Vertical Pattern694 – 960 MHz
Horizontal / Vertical Pattern1710 – 2690 MHz
Antenna rearside with four drilling holes
Antenna and antenna cover
C
4.3-10
694–960–45°
1710–2690–45°
C
4.3-10
694–960+45°
1710–2690+45°
260
205
Any previous data sheet issues have now become invalid.
2-Port Indoor 694–960/1710–2690 C 80°/65° 7dBi
Type No. 80010882Frequency range MHz 694 – 960 1710 – 2690Polarization ° +45, –45 +45, –45Gain dBi 7 7Half-power beam width; hor., ver. ° typ. 80 typ. 65
Impedance Ω 50VSWR 694 – 960 MHz: ≤ 2.2
1710 – 2690 MHz: ≤ 2.2Isolation, between ports dB
694 – 806 MHz: ≥ 16 806 – 960 MHz: ≥ 201710 – 2690 MHz: ≥ 20
Max. power per port W 20 (at 50 °C ambient temperature)Passive Inter-modulation PIM 3 dBc < –140 (at 2 x 40 dBm carrier)
Input 2 x 4.3-10 femaleProtection class IP 30Weight kg 1.6Packing size mm 417 / 281 / 141Height/width/depth mm 399 / 237 / 63Operating temperature range °C –5 … +55
Fire protection classification UL 94-V2Fire load kWh 5.3
Material: Reflector: Brass.Radome: ASA / PC, colour: White.
Mounting: Position: Wall and ceiling possible.The antenna is mounted with four screws (4.5 mm nominal diameter, srew head dia meter max. 9 mm). Screws are not supplied. After antenna mounting install the antenna cover.
Available accessories: Broadband power splitters and tappers (380 – 5920 MHz).
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
936.
5144
/a
Sub
ject
to
alte
ratio
n.
80010882 Page 1 of 1
Indoor Multi-bandDirectional AntennaDual PolarizationHalf-power Beam WidthIntegrated Combiner
1710–2690694–960
XX
65°80°
C
3 dB
10
0
80°
3 dB
10
0
65°
Horizontal / Vertical Pattern694 – 960 MHz
Horizontal / Vertical Pattern1710 – 2690 MHz
Antenna rearside with four drilling holes
Antenna and antenna cover
C
4.3-10
694–960–45°
1710–2690–45°
C
4.3-10
694–960+45°
1710–2690+45°
260
205
Any previous data sheet issues have now become invalid.
2-Port Indoor 694–960/1710–2690 C 80°/65° 7dBi
Type No. 80010882Frequency range MHz 694 – 960 1710 – 2690Polarization ° +45, –45 +45, –45Gain dBi 7 7Half-power beam width; hor., ver. ° typ. 80 typ. 65
Impedance Ω 50VSWR 694 – 960 MHz: ≤ 2.2
1710 – 2690 MHz: ≤ 2.2Isolation, between ports dB
694 – 806 MHz: ≥ 16 806 – 960 MHz: ≥ 201710 – 2690 MHz: ≥ 20
Max. power per port W 20 (at 50 °C ambient temperature)Passive Inter-modulation PIM 3 dBc < –140 (at 2 x 40 dBm carrier)
Input 2 x 4.3-10 femaleProtection class IP 30Weight kg 1.6Packing size mm 417 / 281 / 141Height/width/depth mm 399 / 237 / 63Operating temperature range °C –5 … +55
Fire protection classification UL 94-V2Fire load kWh 5.3
Material: Reflector: Brass.Radome: ASA / PC, colour: White.
Mounting: Position: Wall and ceiling possible.The antenna is mounted with four screws (4.5 mm nominal diameter, srew head dia meter max. 9 mm). Screws are not supplied. After antenna mounting install the antenna cover.
Available accessories: Broadband power splitters and tappers (380 – 5920 MHz).
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
936.
5144
/a
Sub
ject
to
alte
ratio
n.
80010882 Page 1 of 1
Indoor Multi-bandDirectional AntennaDual PolarizationHalf-power Beam WidthIntegrated Combiner
1710–2690694–960
XX
65°80°
C
3 dB
10
0
80°
3 dB
10
0
65°
Horizontal / Vertical Pattern694 – 960 MHz
Horizontal / Vertical Pattern1710 – 2690 MHz
Antenna rearside with four drilling holes
Antenna and antenna cover
C
4.3-10
694–960–45°
1710–2690–45°
C
4.3-10
694–960+45°
1710–2690+45°
260
205
Datenblatt - Indoor Antenne | KATHREIN | 17
KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, GermanyPhone +49 8031 184-0 | Fax +49 8031 184-820 | www.kathrein.com | [email protected]
78510802V02 | Page
PRELIMINARY
Datasheet
936.
A32
90 |
Sub
ject
to
chan
ges
Ordering information ▪ External Omnidirectional
antenna Ceiling mounted: 78510802V02 Scope of Delivery ▪ Omnidirectional antenna in
carton – optional mounting kits to be ordered separately! ▪ Mounting instructions with
drilling template
K-BOW External Omnidirectional antenna Ceiling mounted 694 – 960 MHz, 1710 – 2690 MHz (MiMo)
Remarks
▪ Easiest installation with customized mounting kits
▪ Small form factor for any indoor application
▪ MiMo support for high bands 1710 – 2690 MHz
The K-BOW Omnidirectional Antenna offers highest performance at lowest
impact on interior design. Based on its small dimensions and designed for
“in ceiling” installation it is the ideal fit for any indoor coverage demands.
Three different mounting options provide a solution for nearly any ceiling
material, no matter if mineral wool, wooden or sheet metal.
The visible part of the polycarbonate blend housing can be painted using
conventional acrylic lacquer.
In the high band, the antenna supports full polarization MiMo based on
orthogonal antenna dipoles with a high isolation.
1 of 2
Specifications
RF ports and connector type 2 x N female
Impedance [Ω] 50
Gain [dBi] Approx. 2
VSWR < 2.0
Main port: Frequency range Polarization
[MHz] 694 – 960 and 1710 – 2690Vertical
MiMo port: Frequency range Polarization
[MHz] 1710 – 2690Horizontal
Max. total RF Power [W] 20 (@ 50 °C ambient temperature)
Isolation (Main <–> MiMo) [dB] > 25
Passive Intermodulation IM3 [dBc] < -140 (@ 2 x 40 dBm carrier)
Protection Class IP 30
Height (without connectors) [mm] 120
Diameter [mm] 292
Weight [g] Approx. 700
Package dimensions (W x H x D) [mm] 325 x 173 x 325
Storage temperature range [°C] -10 … +85
Operational temperature range [°C] -5 … +55
120
11
ø260
ø292
© 2015 KATHREIN-Werke KG The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibi-ted. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
K-BOW - External Omnidirectional antenna694 – 960 MHz, 1710 – 2690 MHz (MiMo)Ceiling mounted
Typ 78510802V02
RF ports and connector type 2 x N female
VSWR < 2.0
Gain [dBi] approx. 2
Impedance [Ω] 50
Main port:Frequency rangePolarization [MHz]
694 – 960 and 1710 – 2690
Vertical
MiMo port:Frequency rangePolarization [MHz]
1710 – 2690
Horizontal
Max. total RF Power [W] 20 (@ 50 °C ambient temperature)
Isolation (Main <–> MiMo) [dB] > 25
Passive Intermodulation IM3 [dBc] < -140 (@ 2 x 40 dBm carrier)
Protection class IP 30
Height (without connectors) [mm] 120
Diameter [mm] 292
Weight [g] approx. 700
Packing size [mm] 325 x 173 x 325
Storage temperature range [°C] -10 … +85
Operational temperature range [°C] -5 … +55
Easiest installation with customized mounting kitsSmall form factor for any indoor applicationMiMo support for high bands 1710 – 2690 MHz
The K-BOW - Omnidirectional Antenna offers highest performance at lowest impact on interior design. Based on its small dimensions and designed for “in ceiling” installation it is the ideal fit for any indoor coverage demands. Three different mounting options provide a solution for nearly any ceiling material, no matter if mineral wool, wooden or sheet metal.
The visible part of the polycarbonate blend housing can be painted using conventional acrylic lacquer.
In the high band, the antenna supports full polarization MiMo based on orthogonal antenna dipoles with a high isolation.
Any previous data sheet issues have now become invalid.Page 2 of 2 742192V02
936.
5038
/b
Sub
ject
to
alte
ratio
n.
AccessoriesGeneral Information
Material: Radiator: Tin-plated copper. Refl ector screen: Weather-proof aluminum. Radome: Fiberglass, color: Grey.All screws and nuts: Stainless steel
Mounting: The antenna can be mounted on tubular mast with supplied clamps:
Mast diametermm | inches
Wind speedkm/h | mph
30–70 | 1.2–2.848–70 | 1.9–2.8
< 200 | 124< 241 | 150
Recommended Torque: MA = 25 Nm.Please note: Kathrein does not recommend to use counter nuts.
Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.
Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules.
Pressure test: The antenna has passed a pressure test according to Offi cial Journal of the European Communities L245/171 from 12.09.2002 for the use of the antenna in train tunnels for high speed railways.During test the antenna was subject to alternating pressure with a number of 1x106 alternations of load.The antenna exceeds the standard as follows:Pressure difference according to L245/171: 10 kPaPressure difference during test: 20 kPa
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
www.kathrein.com
All dimensions in mm / inches
KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, GermanyPhone +49 8031 184-0 | Fax +49 8031 184-820 | www.kathrein.com | [email protected]
78510802V02 | Page
PRELIMINARY
Datasheet
936.
A32
90 |
Sub
ject
to
chan
ges
Ordering information ▪ External Omnidirectional
antenna Ceiling mounted: 78510802V02 Scope of Delivery ▪ Omnidirectional antenna in
carton – optional mounting kits to be ordered separately! ▪ Mounting instructions with
drilling template
K-BOW External Omnidirectional antenna Ceiling mounted 694 – 960 MHz, 1710 – 2690 MHz (MiMo)
Remarks
▪ Easiest installation with customized mounting kits
▪ Small form factor for any indoor application
▪ MiMo support for high bands 1710 – 2690 MHz
The K-BOW Omnidirectional Antenna offers highest performance at lowest
impact on interior design. Based on its small dimensions and designed for
“in ceiling” installation it is the ideal fit for any indoor coverage demands.
Three different mounting options provide a solution for nearly any ceiling
material, no matter if mineral wool, wooden or sheet metal.
The visible part of the polycarbonate blend housing can be painted using
conventional acrylic lacquer.
In the high band, the antenna supports full polarization MiMo based on
orthogonal antenna dipoles with a high isolation.
1 of 2
Specifications
RF ports and connector type 2 x N female
Impedance [Ω] 50
Gain [dBi] Approx. 2
VSWR < 2.0
Main port: Frequency range Polarization
[MHz] 694 – 960 and 1710 – 2690Vertical
MiMo port: Frequency range Polarization
[MHz] 1710 – 2690Horizontal
Max. total RF Power [W] 20 (@ 50 °C ambient temperature)
Isolation (Main <–> MiMo) [dB] > 25
Passive Intermodulation IM3 [dBc] < -140 (@ 2 x 40 dBm carrier)
Protection Class IP 30
Height (without connectors) [mm] 120
Diameter [mm] 292
Weight [g] Approx. 700
Package dimensions (W x H x D) [mm] 325 x 173 x 325
Storage temperature range [°C] -10 … +85
Operational temperature range [°C] -5 … +55
120
11
ø260
ø292
© 2015 KATHREIN-Werke KG The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibi-ted. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
KATHREIN-Werke KG, Anton-Kathrein-Straße 1-3, 83022 Rosenheim, GermanyPhone +49 8031 184-0 | Fax +49 8031 184-820 | www.kathrein.com | [email protected]
78510802V02 | Page
PRELIMINARY
Datasheet
2 of 2
78510810V02
Cover plate for omni antenna 250 mm aperture
For material with a lower density, like wood
78510811V02
Cover plate for omni antenna 400 mm aperture
For dense materials like sheet metal or stone
78510812V02
Fixture for omni antenna concealed installation
For light ceiling materials, like mineral wool
Optional Mounting Kits:
936.
A32
90 |
Sub
ject
to
chan
ges
Optional Mounting Kits:
78510810V02Cover plate for omni antenna 250 mm aperture. For material with a lower density, like wood
78510811V02Cover plate for omni antenna 400 mm aperture. For dense materials like sheet metal or stone
78510812V02Fixture for omni antenna concealed installationFor light ceiling materials, like mineral wool
18 | KATHREIN | Datenblatt - Koaxialkabel
KoaxialkabelTyp SPN LCF 7/8“-50JTyp SPN LCF 1/2“-50J
Typ SPN LCF 7/8“-50J SPN LCF 1/2“-50J
BN 930807 930801
Aufbau: Innenleiter [mm] 9,32 4,8
Material Cu/blank Cu/blank
Isolation [mm] 22,4 11,9
Material Foam-PE Foam-PE
Abschirmung Cu-Rohr Cu-Rohr
Mantel [mm] 27,8 15,8
Material PE PE
Farbe schwarz schwarz
Elektrische Daten:
Wellenwiderstand [Ω] 50+/-1% 50+/-1%
Dämpfung: 50 MHz 100 MHz 200 MHz
0.81.131.62
1.52.163.08
Dämpfung bei 20°C/dB/100m 400 MHz 600 MHz 900 MHz 1200 MHz 1500 MHz 1800 MHz 2100 MHz 2500 MHz 3000 MHz
2,322,883,574,274,715,215,676,256,93
3,81 5,486,88,128,979,9110,811,913,2
Schirmungsmaß 100 - 900 MHz 900 -2000 MHz 2000 - 3000 MHz
>100>100>100
>100>100>100
Kapazität pF/m 74 76
Verkürzungsfaktor v/c 0,9 0,88
Gleichstromwiderstand Inner [Ω/km] 1,54 1,57
Gleichstromwiderstand [Ω/km] 1,55 2,7
Biegeradius single [mm] <120 <70
Biegeradius repeated [mm] <250 <125
Low Attenuation:The low attenuation of CELLFLEX® coaxial cable results in
highly efficient signal transferin your RF system.
Complete Shielding:The solid outer conductor of CELLFLEX® coaxial cable
creates a continuous RFI/EMI shield that minimizes
system interference.
Low VSWR:Special low VSWR versions of CELLFLEX® coaxial cables
contribute to low system noise.
Outstanding Intermodulation Performance:CELLFLEX® coaxial cabels solid inner and outer conduc-
tors virtually eliminate intermods. Intermodulation perfor-
mance is also confirmed with state-of-the-art equipment
at the RFS factory.
High Power Rating:Due to their low attenuation, outstanding heat transfer
properties and temperature stabilized dielectric materials,
CELLFLEX® cable provides safe long term operating life
at high transmit power levels.
Wide Range of Application:Typical areas of application are: feedlines for broadcast
and terrestrial microwave antennas, wireless cellular,
PCS and ESMR base stations, cabling of antenna arrays,
and radio equipment interconnects.
SPN LCF 1/2“-50J1/2“ CELLFLEX® Low-Loss Foam
Dielectric Coaxial Cable
SPN LCF 7/8“-50J7/8“ CELLFLEX® Low-Loss Foam
Dielectric Coaxial Cable
KATHREIN-Vertriebsgesellschaft m.b.H.Gnigler Straße 565020 SalzburgÖsterreich
Tel: +43 662 875531Fax: +43 662 878344-9E-Mail: [email protected]
Niederlassung WESTLandesstraße 186176 VölsÖsterreich
Tel.: +43 512 304602Fax: +43 512 304602-13E-Mail: [email protected]
Niederlassung OSTHertha-Kräftner-Gasse 4a1210 WienÖsterreich
Tel.: +43 1 3322321 Fax: +43 1 3322317-22E-Mail: [email protected]
03/2
017
| Te
chni
sche
Änd
erun
gen
vorb
ehal
ten.