2- Side Frames 2- Wine Racks 4- Feet1 Tray 4- Levelers 24- Screws

1. Attach one of the wine racks to one of the side frames.

Note: A Phillips screwdriver is required for assembly.

Parts List:

MODEL 655147ASSEMBLY INSTRUCTIONS

2. Attach the second wine rack to the side frame as in step 1.

4. Attach the feet to the bottom of the stand and insert the levelers into the feet.

HoleFaces

In

The studs on the winerack must be insertedino the holes in the sideframe.

The holes in thebottom of the winerack and in thebottom of the sideframe should bealigned as shown.

3. Lay the second side frame down on a clean non-abrasive surface. Insert the studs on the wine racks into the holes in the side frame and attach the racks to the side frame as in step 1.

5. Turn the stand upright and adjust the levelers so that the stand sits level on the floor and does not rock. Place the tray on top of the stand.

©Copyright Howard Miller Clock Company PD1236510/08

When placing the tray on top of thestand, the metal studs on top of thestand must be inserted into the holesin the bottom of the tray so that thetray does not slide off the stand.

Note: