MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo

MODEL-BASED DEFINITIONDESIGN WITH 2D AND 3D DETAILING

Michael FridmanProduct Manager for MBD & Detailing, PTC

November 29th , 2019

22

AGENDA• MBD-MBE opportunities

• Creo MBD evolution and annotation types

• Creo 6.0 core MBD enhancements

• Future MBD Roadmap and Creo 7.0 outlook

• Questions

3

MBD-MBE OPPORTUNITIES

4

• Model Based Definition:– An annotated model and its

associated data elements that define the product in a manner that can be used effectively without a drawing graphic sheet.

• Model Based Enterprise:– An organization that uses

model-based definitions for the purpose of commission, operation, service, and decommission of a product.

UNDERSTANDING MBD & MBE

Annotated 3D

CAD Model

5

*Selected feedback from pilots and real world use by PTC customers

MBD offers the potential for significant time and cost savings

MBD-MBE VALUE OPPORTUNITIES

Annotated 3D CAD Model

With fully semantic &

correctly applied GD&T

Faster Product Development

Faster Manufacturing and Inspection

Reduced Errors and Non-

conformances

40% faster

documentation creation

Proven Benefits *

60% reduction

in First article inspection time

90% less

product non-conformances

6

CREO MBD EVOLUTION & ANNOTATION TYPES

7

MBD IN CREO – EVOLUTION IN RECENT RELEASES

Creo 4.0

Streamlined annotation workflows(modernized standalone anno.)

Improved support for ASME/ISO standards

Full semantic definition

Semantic PMI with STEP AP242

GD&T Advisor Integration Creo 6.0

Creo 4.0 MORs& Creo 5.0

Annotation conversion

Improved anno. UX

Semantic query

Modernized annotation cont’d

Improved annotation features

Anno. support for advancedmodeling concepts (DSF & MC)

8

Standalone annotations Annotation Elements owned by features

In the ribbon:

In the model tree:

CREO ANNOTATION TYPES OVERVIEW

9

• Annotations that were modernized in Creo 4.0:

• Common capabilities for the modernized standalone annotations and for all annotations elements owned by annotation features:

– Similar graphical appearance and basic properties

STANDALONE ANNOTATIONS VS. ANNOTATION FEATURES

10




– Manage their references


11





– Add and manage their parameters


12






– Designate as control characteristics to Windchill


13







– Errors about reference failures are reported in the notification center


14







– Errors about reference failures are reported in the notification center

– Can be queried with Semantic Query• Available for the modernized annotation types only


15

• Special capabilities of Annotation Features owning Annotation Elements:

– Annotation grouping & organization


16



– Support for feature operations• Pattern

• Copy

• Suppress

• UDF

• Etc.


17



– Support for feature operations• Pattern

• Copy

• Suppress

• UDF

• Etc.

– Annotation Elements can be propagated via data sharing features(merge, copy geometry, etc.)


18

STANDALONE ANNOTATION EVOLUTION

Standalone Annotation Types

Creo 4.0

Capabilities

Support for DS features

Future Releases

Special Feature Operations

Suppress/Exclude

Creo 6.0

GroupingCreo 5.0

Future looking information subject to change without notice

19

CREO 6.0 CORE MBD ENHANCEMENTS

20

• Creation & Editing– Context sensitive format ribbon for notes

– Snapping guides for tangent/normal placement on edges

– Improved dragging behavior for ‘on item’ type note

– Consolidated legacy dialogs of properties & format commands into modern UI tools• Tip: Legacy note properties dialog may be restored with the

following config: “hide_pre_creo6_note_properties yes*/no”

• Standalone Annotation Behavior– Can have parameters

– Can be designated as Control Characteristic for MPMLink

– Issues are reported in Notification Center

MODERNIZATION OF NOTES

Benefits

• Easier note creation workflows

• Contextual ribbon

• Consolidated formatting options

• Modern standalone capabilities

21

• Semantic Definition Support– Reference collector button in the ribbon

– Attachment reference is automatically added

– Can have multiple semantic references

– Supports semantic query highligting

• Modernized notes are also available for drawings

MODERNIZATION OF NOTES

22

• New “My symbols” section is available in the note’s text editor dialog

• My symbols list shows the user the most recently used symbols and being updated as the user inputs additional symbols

MOST RECENTLY USED SYMBOLS BAND IN NOTE’S TEXT EDITOR

Available with:

Creo 6.0.1.0

23

• New ‘Exclude‘ state for annotations with missing references– Excluded annotations are not displayed in graphics

• Configurable behavior– Annotations with regeneration failure/warning are being highlighted on screen (legacy behavior)

OR

– Annotations being excluded and not visible on screen (new behavior)

IMPROVED PARENT/CHILD BEHAVIOR FOR ANNOTATIONS

Missing References

Pre Creo 6.0 behavior

Creo 6.0 behavior (Optional)

24

• Supported for:– Modernized standalone annotations

– Annotation feature owned, annotation elements

• Annotations may be excluded due to parent feature being:– Excluded by family table

– Excluded by Simplified representation

– Suppressed

– Deleted

– Section which is deactivated & hidden • Supported for: Modernized standalone annotations

except for ordinate dimension

• Controlled with 4 new detail options:– excl_annotations_of_suppressed/deleted/excluded/section


Benefits

• Easier management of annotation visibility

• Failed annotations can be removed from screen

25

• New column for model tree: “Annotation status”, informs about the status of the annotation:– Excluded

– Missing references

– Failed

– Unconverted

– Not available – for standalone non modernized type annotations

• Search tool updated for annotation status query– Can help find all annotations that are sharing a

selected status


26

• Stacked annotations propagation is improved

• Example for external merge:

• Manual selection of a stack member annotation will propagate the whole stack

• Supported for annotations feature owned, annotation elements

ENHANCED PROPAGATION OF ANNOTATION ELEMENTS FOR DATA SHARING FEATURES

Benefits

• More robust annotation propagation

• Help maintain design intent

27

• Annotation Elements (AE) can be moved to other Annotation Features (AF) of the same top model without actual editing any AF

• Annotations can be selected from Model tree/Detail tree/Graphics

• AEs that belong to different AF can also be relocated by this enhancement

• Stacked Annotation will move together to the target AF

ENHANCED FLEXIBILITY WHEN WORKING WITH ANNOTATION FEATURES

Also Available with: Creo 4.0 M080 / Creo 5.0.5.0

28

• Drawing name can now automatically be extracted from the model name

AUTOMATIC DRAWING NAMING

Benefits

• Saves time

• Eliminates typing errors

29

• Modelcheck can report about MBD related situations in your model:

– Annotations that are not referencing any surfaces

– Surfaces not referenced by any GD&T

– Annotations not found on any combined state or annotations that are shown in more than one combined state

– Combined State Names do not adhere to pre-defined naming convention

• User can selectively decide which annotations will not be reported

NEW MBD CHECKS IN MODELCHECK

Benefits

Help users to verify their design intent & identify errors

30

FUTURE MBD ROADMAP & CREO 7.0 OUTLOOK

31

MBD IN CREO – EVOLUTION IN RECENT RELEASES

Creo 4.0

Streamlined annotation workflows(modernized standalone anno.)

Improved support for ASME/ISO standards

Full semantic definition

Semantic PMI with STEP AP242

GD&T Advisor Integration Creo 6.0

Creo 4.0 MORs& Creo 5.0

Future Releases

Annotation conversion

Improved anno. UX

Semantic query

Modernized annotation cont’d

Improved annotation features

Anno. Support for advancedmodeling concepts (DS & MC)

Standards

Productivity & UX


Symbols

32

• Updated compliance to ISO 1101:2017 & ASME Y14.5-2018 standards:– New palette symbols

– Syntax checker update

– Model level setting for tolerance standard

– Additional gtol indicator values

– Gap control for indicators

– Support for multiple normal/tangent leaders in drawings

– Improved spacing alignment for composite gtols

CREO 7.0 – IMPROVED STANDARDS COMPLIANCE


33

CREO EZ TOLERANCE ANALYSIS INTEGRATION


Powered by

• Capabilities: – Define & visualize multiple 1-D tolerance stack-up

analysis using existing model surfaces, assemblyconstraints and GD&T

– Evaluate impact of GD&T stack-ups on areas of concern using common statistical & quality metrics

– Generates detailed html reports

– Indicates when more complex analysis is advised(CETOL 6σ)

– Removes the need of working with spreadsheets

• Integration details:– Co-existing with TAE for Creo 4.0 M110 / 5.0.6.0 / 6.0.3.0 integrations

– TAE will be retired with Creo 7.0.0.0

– EZ Tolerance analysis will be available with the existing TAE license

Documents

MODEL-BASED DEFINITIONptcuser.nl/.../MBD-Design-with-2D-and-3D-Detailing.pdf · DESIGN WITH 2D AND 3D DETAILING Michael Fridman Product Manager for MBD & Detailing, PTC ... •Creo