Upload
others
View
29
Download
0
Embed Size (px)
Citation preview
Model CR-1-120VSpecification Grade
PatentedElectrical Specifications
120 volts AC 60 Hz.1000W Ballast, 600W Tungsten
1/6 HP Motor Load
Always observe N.E.C. & local codes.
Mechanical SpecificationsLow Voltage Side:snaps into 1/2 KOHigh Voltage Side:
H 1-3/8” W 1-7/8” L 1-3/8”
5 YEAR WARRANTY
LISTEDAPPLIANCE CONTROL
18HK
CLOSET LIGHT CONTROLUSING NORMALLY OPEN SWITCH
(MAGNETIC TYPE SWITCH, Surface or Concealed)
Note: For double doors, wire N.O. switches in seriesSwitch is open when door is open,
Switch is closed when door is closed
20 AMP CIRCUITBREAKER
LINE HOT
LINE NEUTRAL
LOAD
WHITE
RED
BLACK
ORANGEBLUE
YELLOWN.O.
LIGHTIS ON
* Dry Contact Input
*Model CR-1-120
For clarity, not all internal
components are shown.
Model CR-1-120 Specifications & Wiring Diagrams
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
www.closetlightrelay.com
High Voltage
Low
Voltage
1-3/8”
1-3/8”
1-7/8”
Heavy Dutyversions available,please contact LVS
with load requirements
20 AMP CIRCUITBREAKER
LINE HOT
LINE NEUTRAL
LOAD
WHITE
RED
BLACK
ORANGEBLUE
YELLOW
N.C.LIGHTIS ON *
CLOSET LIGHT CONTROLUSING NORMALLY CLOSED SWITCH
(MECHANICAL PUSH BUTTON TYPE SWITCH)
Note: For double doors, wire N.C. switches in parallelSwitch is closed when door is open, Switch is open when door is closed
* Dry Contact Input
Model CR-1-120
For clarity, not all internal
components are shown.