I N T RO D U C I N G I A L L N E W T4

Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the

equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures

in place.

NH36145267 • 111215 • SP • PRINTED IN U.S.A.

Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.

© 2012 CNH America LLC. New Holland is a registered trademark of CNH America LLC.

SOLIDIFY YOUR PLACE. . .

MODELS T4.85 T4.95 T4.105Engine

Type 4-cylinder

Displacement cu. in. (L) 207 (3.4)

Gross engine HP 84 98 106

PTO HP 70 82 91

Emissions Tier 4A with Cooled Exhaust Gas Recirculation (CEGR) with Diesel Particulate Filter (DPF)

Transmissions

Standard 12X12 Mechanical shuttle

Option 1 20X12 Mechanical shuttle w/ creeper

Option 2 12X12 Power shuttle

Option 3 20X20 Power shuttle w/ creeper

3-Point hitch

Lift Capacity @ 24" lbs. (kg) 5,620 (2549)

Optional lift ram @ 24" lbs. (kg) 7,351 (3334)

PTO

Base PTO speeds rpm 540/1000

Optional PTO speeds rpm 540

Hydraulics

Base rear remotes 1

Optional rear remotes 2

Main pump fl ow gpm (l/min) 12.5 (47.5)

Optional main pump fl ow gpm (l/min) 16.9 (64)

Steering & services pump gpm (l/min) 7.3 (27.5)

Optional steering and services pump

gpm (l/min) 9.7 (37)

Key Confi gurations

Operator’s platform Cab or ROPS

Front axle 2WD or 4WD

Dimensions*

Minimum length in. (mm) 159.4 (4049)

Minimum width in. (mm) 75.7 (1922)

Minimum height in. (mm) 102.5 (2603)

Minimum weight lbs. (kg) 7,055 (3200)

SPECIFICATIONS

LOADER MODEL 655TL 665TLCompatible T4 models All models with

30” tires or smallerAll models

Loader type: NSL (non self-leveling) or MSL (mechanical self-leveling)

NSL MSL NSL MSL

Maximum lift height, in. 126 125 134 135

Dump clearance in. 93 93 101 102

Digging depth, in. 8 8 7 6

Lift capacity @ 800mm from bucket pivot point, lbs.

2,478 3,179 2,632 3,428

Breakout force @ 800mm from bucket pivot point, lbs.

3,739 3,860 4,455 5,661

Reach @ maximum lift, in. 39 39 43 43

Reach @ ground level, in. 90 90 91 93

Bucket rollback angle, degrees

45 40 44 40

Bucket dump angle, degrees 145 145 145 145

Attachment type Skid steer style

LOADER SPECIFICATIONS

FRONT AXLES TO FIT YOUR NEEDSWhether you need 4WD to dig out a heavy bucket of pen-packed manure in the barnyard or 2WD for light in the fi elds, T4 Series tractors are here to help you out. Rugged 2WD and 4WD front axles are available on all models.

*Tractor confi gured with 4WD, cab, and 18.4R34 rear tires

SOLIDIFY YOUR PLACE. . .

I N T RO D U C I N G I A L L N E W T4

Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the

equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures

in place.

NH36145267 • 111215 • SP • PRINTED IN U.S.A.

Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.

© 2012 CNH America LLC. New Holland is a registered trademark of CNH America LLC.

SOLIDIFY YOUR PLACE. . .

MODELS T4.85 T4.95 T4.105Engine

Type 4-cylinder

Displacement cu. in. (L) 207 (3.4)

Gross engine HP 84 98 106

PTO HP 70 82 91

Emissions Tier 4A with Cooled Exhaust Gas Recirculation (CEGR) with Diesel Particulate Filter (DPF)

Transmissions

Standard 12X12 Mechanical shuttle

Option 1 20X12 Mechanical shuttle w/ creeper

Option 2 12X12 Power shuttle

Option 3 20X20 Power shuttle w/ creeper

3-Point hitch

Lift Capacity @ 24" lbs. (kg) 5,620 (2549)

Optional lift ram @ 24" lbs. (kg) 7,351 (3334)

PTO

Base PTO speeds rpm 540/1000

Optional PTO speeds rpm 540

Hydraulics

Base rear remotes 1

Optional rear remotes 2

Main pump fl ow gpm (l/min) 12.5 (47.5)

Optional main pump fl ow gpm (l/min) 16.9 (64)

Steering & services pump gpm (l/min) 7.3 (27.5)

Optional steering and services pump

gpm (l/min) 9.7 (37)

Key Confi gurations

Operator’s platform Cab or ROPS

Front axle 2WD or 4WD

Dimensions*

Minimum length in. (mm) 159.4 (4049)

Minimum width in. (mm) 75.7 (1922)

Minimum height in. (mm) 102.5 (2603)

Minimum weight lbs. (kg) 7,055 (3200)

SPECIFICATIONS

LOADER MODEL 655TL 665TLCompatible T4 models All models with

30” tires or smallerAll models

Loader type: NSL (non self-leveling) or MSL (mechanical self-leveling)

NSL MSL NSL MSL

Maximum lift height, in. 126 125 134 135

Dump clearance in. 93 93 101 102

Digging depth, in. 8 8 7 6

Lift capacity @ 800mm from bucket pivot point, lbs.

2,478 3,179 2,632 3,428

Breakout force @ 800mm from bucket pivot point, lbs.

3,739 3,860 4,455 5,661

Reach @ maximum lift, in. 39 39 43 43

Reach @ ground level, in. 90 90 91 93

Bucket rollback angle, degrees

45 40 44 40

Bucket dump angle, degrees 145 145 145 145

Attachment type Skid steer style

LOADER SPECIFICATIONS

FRONT AXLES TO FIT YOUR NEEDSWhether you need 4WD to dig out a heavy bucket of pen-packed manure in the barnyard or 2WD for light in the fi elds, T4 Series tractors are here to help you out. Rugged 2WD and 4WD front axles are available on all models.

*Tractor confi gured with 4WD, cab, and 18.4R34 rear tires

AS BOSS OF THE BARN AND FOREMAN OF THE FIELD...

MEET THE ULTIMATE FARMHAND

LOADS OF LOADER OPTIONS Strong 655TL and 665TL loaders make T4 Series tractors the ultimate tractor for loader work. Both loader models are available with mechani-cal and non-self-leveling functions, as well as 72- and 84-inch buckets.

TRANSMISSIONS TAILORED FOR YOUChoose the transmission that’s right for you. Select a 12X12 transmission with either a mechanical or power shuttle. If going slow is important, both options can be equipped with a creeper gear.

HANDLES HEAVY LIFTINGStandard three-point lift capacity is a hefty 5,620 pounds. For even more capacity, an additional lift ram provides you with 7,351 pounds of lift. A main implement pump flow of 12.5 gpm and a steering and services pump with 7.3 gpm provide you with a total hydraulic flow of 19.8 gpm.

SERVICEABILITY THAT’S SECOND TO NONEYou spend less time on maintaining a T4 Series tractor thanks to 500-hour service intervals. And, the one-piece hood and ground-level service points make checks easy.

DEPENDABLE ENGINESNew Holland FPT F5C 207-cubic-inch, four-cylinder engines with common rail fuel injection systems power T4 Series tractors. All models are Tier 4A emissions compliant thanks to a Cooled Exhaust Gas Recirculation (CEGR) system and a Diesel Particulate Filter (DPF).

THE HELP YOU’VE BEEN LOOKING FORWhen you hire someone to work on the farm, what do you look for? The ideal farmhand should be:

Versatile – able to adapt to any task at hand

DepenDable – ready to report to work when you need them

strong – has the endurance to put in long hours out in the fields and in the barn

You’re guaranteed to find all these traits in the new T4 tractors from New Holland. Their good looks don’t hurt either!

A COMFORTABLE CHOICEYou work the farm in comfort in T4 Series tractors. Choose a ROPS platform with a convenient FOPS canopy or the ergonomic VisionView™ cab with a high-visibility panel that’s perfect for loader work. The full-size instructor seat and ten repositionable vents for heating and air conditioning keep you and your companion comfortable no matter what the outside temperature. The CommandArc™ console conveniently places the controls you use most frequently in a natural position around your body.

I N T RO D U C I N G I A L L N E W T4

Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the

equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures

in place.

NH36145267 • 111215 • SP • PRINTED IN U.S.A.

Visit our Web site at www.newholland.com/na Or, call toll-free: 1-888-290-7377Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.

© 2012 CNH America LLC. New Holland is a registered trademark of CNH America LLC.

SOLIDIFY YOUR PLACE. . .

MODELS T4.85 T4.95 T4.105Engine

Type 4-cylinder

Displacement cu. in. (L) 207 (3.4)

Gross engine HP 84 98 106

PTO HP 70 82 91

Emissions Tier 4A with Cooled Exhaust Gas Recirculation (CEGR) with Diesel Particulate Filter (DPF)

Transmissions

Standard 12X12 Mechanical shuttle

Option 1 20X12 Mechanical shuttle w/ creeper

Option 2 12X12 Power shuttle

Option 3 20X20 Power shuttle w/ creeper

3-Point hitch

Lift Capacity @ 24" lbs. (kg) 5,620 (2549)

Optional lift ram @ 24" lbs. (kg) 7,351 (3334)

PTO

Base PTO speeds rpm 540/1000

Optional PTO speeds rpm 540

Hydraulics

Base rear remotes 1

Optional rear remotes 2

Main pump fl ow gpm (l/min) 12.5 (47.5)

Optional main pump fl ow gpm (l/min) 16.9 (64)

Steering & services pump gpm (l/min) 7.3 (27.5)

Optional steering and services pump

gpm (l/min) 9.7 (37)

Key Confi gurations

Operator’s platform Cab or ROPS

Front axle 2WD or 4WD

Dimensions*

Minimum length in. (mm) 159.4 (4049)

Minimum width in. (mm) 75.7 (1922)

Minimum height in. (mm) 102.5 (2603)

Minimum weight lbs. (kg) 7,055 (3200)

SPECIFICATIONS

LOADER MODEL 655TL 665TLCompatible T4 models All models with

30” tires or smallerAll models

Loader type: NSL (non self-leveling) or MSL (mechanical self-leveling)

NSL MSL NSL MSL

Maximum lift height, in. 126 125 134 135

Dump clearance in. 93 93 101 102

Digging depth, in. 8 8 7 6

Lift capacity @ 800mm from bucket pivot point, lbs.

2,478 3,179 2,632 3,428

Breakout force @ 800mm from bucket pivot point, lbs.

3,739 3,860 4,455 5,661

Reach @ maximum lift, in. 39 39 43 43

Reach @ ground level, in. 90 90 91 93

Bucket rollback angle, degrees

45 40 44 40

Bucket dump angle, degrees 145 145 145 145

Attachment type Skid steer style

LOADER SPECIFICATIONS

FRONT AXLES TO FIT YOUR NEEDSWhether you need 4WD to dig out a heavy bucket of pen-packed manure in the barnyard or 2WD for light in the fi elds, T4 Series tractors are here to help you out. Rugged 2WD and 4WD front axles are available on all models.

*Tractor confi gured with 4WD, cab, and 18.4R34 rear tires