Module00 About Training

7/27/2019 Module00 About Training

1/10

Infrastructure for All-IP Broadband Mobile Wireless

Accelerating Access Anywhere

Airvana 1xEV-DO Technology TrainingCourse: Introductions and Schedule

Dr. Jay WeitzenAirvana Performance Engineering


2/10

Confidential & Proprietary 2

Training Goals

Provide a solid understanding of 1xEV-DOairlink,signaling and higher layer functions, so youcan debug system problems

Using CLI and EMS to manage, configure, andcommission your network

Planning, parameter setting, and optimizingnetwork

Network troubleshooting: Airlink, RAN, and Core

Network Knowledge exchange based on our experience

deploying 1xEV-DO networks

Make your team as self sufficient as possible


3/10


About Your Instructor

Airvanas lead performance engineer Responsible for end-to-end analysis, measurement, and

performance optimization of deployed networks

Frequent interaction with Nortel core CDMA team

Member of Airvana QA, tech services, and BTS group

Participated in every Airvana trial and deployment

20 years of wireless data experience with GTE, Nextwave,

adaptive broadband Involved in first deployments of IS-95

Developed early verification of polarization diversity

Developed GRANET, MaxPlan and other planning tools

Professor, ECE at university of Massachusetts Lowell Teach classes in wireless, data networking, and communication

theory

Nominated IEEE fellow


4/10


My Teaching Philosophy

Knowledge transfer is why I am here

Please tell me to speed up or slow down depending on yourinterests

Please ask questions

If I do not know the answer, I will get it for you

There are no dumb questions you are here to learn

The schedule is flexible

It serves as a framework for the discussion

We can focus on any area of your interest

Some extra time has been built into the schedule

Have fun and enjoy! (P.S. There are no exams

)


5/10


Day 1: 1xEV-DO Airlink and Call Flows

09:00 09:30 Introduction to 1xEV-DO and comparison with IS-2000

09:30 10:00 1xEV-DO RF and Airlink Characteristics

10:00 11:30 Forward & Reverse Channels: Traffic, Access, Control,

Paging11:30 12:30 1xEV-DO Signaling, and Looking at Messages on CAIT

12:30 13:30 Lunch

13:30 15:00 1xEV-DO Call Flows Continued15:00 16:00 Hybrid Mode Operation


6/10


Day 2: Planning and Optimizing the Network

09:00 11:30 RF planning, airlink parameter setting, and optimization

12:00 13:00 Lunch

13:00 14:00 RNC and DOM CLI

14:00 15:00 RAN and Core Network Planning for 1xEV-DO

15:00 16:00 Higher Layers and associated CLI commands


7/10


Day 3: Managing and Configuring the Network

09:00 10:30 Introduction to the EMS

10:30 11:30 Data collection subsystem

11:30 12:30 Logging subsystem

12:30 13:30 Lunch

13:30 14:30 Using the EMS to configure the network

14:30 15:00 Traps, alarms and notifications

15:00 16:00 Default OM template and post processing


8/10


Day 4: Troubleshooting the Network

09:00 11:30 Troubleshooting RAN Functionality

12:00 13:00 Lunch

13:00 14:00 Configuring and Using CAIT for troubleshooting

14:00 16:00 Troubleshooting RAN Performance

Using other Performance tools: windump,etherreal, sniffer

A discussion of Day 5 Trouble shooting Test cases


9/10


Day 5: Hands on Troubleshooting

09:00 09:30 Discussion of Troubleshooting Test Cases

09:30 12:00 Hands-on 1xEV-DO Network Troubleshooting

12:00 13:00 Lunch

13:00 16:30 Hands-on 1xEV-DO Network Troubleshooting


10/10

Lets Get Started!

Accelerating Access Anywhere

Documents

Module00 About Training