Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
P. O. Box 6577, Dammam 32447, Saudi Arabia.
Tel.: +966 13 8226550 / 8187940 / Mobile: 0592222757
Email: [email protected], Website: www.shamranifact.com
Dammam, Dallah Industrial, Abu Hadriyah Highway Road
Factory Tel. : +966 13 8226550 / 8187940
Fax. : +966 13 8202438
TOYOTASHOW-ROOM
VEHICLES PERIODICINSPECTION CENTRE
HALF MOONBEACH
AZIZIA BAHRAIN KUWAIT ABU HADRIYA HIGHWAY
DALLAH
JUBAIL ROAD
ARAMCO
DH
AH
RAN
ABQ
AIQ
RO
AD
NEW
AIR
PORT
DA
MM
AM
DA
MM
AM
IBN
KH
ALD
OO
N R
OA
D
DA
MM
AM
TO
WN
DRIVING SCHOOL
MOHAMMAD O. ALSHAMRANIFACTORY FOR METAL INDUSTRIES
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
COMPANY PROFILE
We provide the best solutions for Steel products
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
INTRODUCTION
MISSION & VISION
OUR PRODUCTS
LIST OF MANPOWER
GALLERY
SAFETY PROGRAM
CERTIFICATES
INDEX
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
INTRODUCTION
We are glad to introduce ourselves as one of the leading manufactures in the field of advanced heavy
industries .That is due to the long and wide experience in the manufacturing of heavy equipments
and structure like Flat bed Trailer, Low bed Trailer, Genset Trailer, Dumpers, Tankers, Cement Bulkers
& Mixing drums, Storage Tanks, Car Carriers, Cool & Dry Boxes, Insulated Boxes, Portable Houses,
Hangers, Storage Racks etc. and all kind of steel structural works not only in Kingdom of Saudi
Arabia but also the Arabian Gulf areas . More over we have special experiences in the supporting
service for the oil field companies like Schlumberger group of companies, Arabian Drilling Co. etc .
We are also providing our facilities for supporting services like rolling of sheet, dishing cutting &
bending of sheets etc . for our valued customers. We are always careful to exert more efforts to devel-
op better quality, quick performance and fast delivery as well as uncompetitive reasonable prices.
We wish to make very good business relationship with your concern.
The Al Shamrani Factory has a full range of armored trucks that includes Bullet proof Automobiles,
Trucks, and Vehicles Cash in Transit Armored Vans Swat / Police Tractical Armored Vehicles
If you honor us with any of your requirement , we will supply that with very much pleasure to your
satisfaction.
We assure our best service and prompt execution always .
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
MISSION & VISION
Mission
To deliver exceptional value of our clients, to provide
them with more than just an on time, cost efficient steel
products structural designing and engineering products,
but also provide them with performance while maintain-
ing the highest level of compliance with the international
standard of quality and safety.
Vision
To be recognized as the premier company in the field
of engineering and structural fabrication driven by
excellence and thrive on client satisfaction.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
VACUUM TANK 32,000 LITER SPECIFICATION
Overall dimensions (LxWxH) (mm) 11000x2500x4400
Tank capacity (ltrs) 32,000
Tank body 6 mm
Vacuum pump MORO M9 pump or Equivalent
Engine DEUTZ STANDARD ENGINE MODEL : F3L912
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface preparation Shot blast
Tank interior Sand blast
Accessories Rear ladder Two manhole Walkway Mudguard Rear bumper Toolbox Water Tank (Plastic)
Tank interior Sand Blasted SA 2,5 and painted with two coats of primer and 2 cots of finished paint Single color as per customer ‘s choice.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
CEMENT BULKER 30 TON SPECIFICATION
Overall dimensions(LxWxHx)(mm) 10000x2650x4000
Main body 5 mm
Capacity (m3) 30 Ton
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear ladder Two manhole Walkway Mudguard Rear bumper Toolbox Water Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
WATER TANK 32,000 LITER SPECIFICATION
Overall dimensions (LxWxH) (mm) 12000x2500x3500
Tank capacity (ltrs) 32000
Tare weight (Kg) 9000
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear Loading ladder Inspection manhole Walkway Mudguard Rear bumper Toolbox Water Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
DUMP TRUCK SEMI TRAILER 22cbm SPECIFICATION
Overall dimensions(LxWxHx)(mm) 9000x2500x3250
Tare weight (m3) 22 cbm
Lifting Hydraulic piston HYVA brand or Binotto telebrand
Side wall thickness 6 mm
Floor thickness 8 mm
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel (IPE 400)
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear ladder Walkway Mudguard Rear bumper ToolboxWater Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
HIGH BED TRAILER 30 TON SPECIFICATION
Overall dimensions(LxWxHx)(mm) 13600x2600x1500
Tare weight (ton) 30 ton
Loading deck thickness 4 mm (chequered plate)
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear ladderMudguardRear bumperSpare tire holderToolboxWater Tank (Plastic)
MOHAMMED O.ALSHAMRANI FACTORY FOR METAL INDUSTRIES
LOW BED 70 TON SPCIFICATION
Overall dimensions(LxWxHx)(mm) 17000x3000x1300
Tare weight (ton) 70 ton
Loading deck thickness 6 mm
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Mudguard Rear bumper Spare tire holder ToolboxWater Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
IFUEL TANK SEMI – TRAILER SPECIFICATION
Overall dimensions(LxWxHx)(mm) 12000x2500x3500
Laden height (mm) 3000
Tare weight (Kg) 9000
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear loading ladderInspection ManholeWalkwayMudguardRear BumperToolboxWater Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
PIPE DOLLY 40 T0N SPECIFICATION
Overall dimensions(LxWxHx)(mm) 25000x2500x1500
Tare weight (Ton) 40 Ton
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main Tube High tensile steel
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear ladder Inspection manhole Walkway Toolbox Mudguard Rear Bumper Water Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
MUD TANK 22.000 LITER SPECIFICATION
Overall dimensions(LxWxHx)(mm) 11000x2500x4400
Tank capacity 22,000
Main body thikness 6 mm
Suspension system Leaf spring or airbag suspension
Axle Various axles like BPW,YORK and AAMC with various bearings
Tire Various brands of bias tire or radial tires
King pin Forged steel,2” or 3.5” welded or bolt-in
Landing gear 24T ,25T
Main beam High tensile steel
Surface Preparation Shot blast
Electrical system Standard electrical equipment
Accessories Rear LadderTwo manholeWalkwayMudguardRear bumperToolboxWater Tank (Plastic)
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
LIST OF MANPOWER
QA/QC Manager
Civil Engineers
Mechanical Engineers
Safety Engineers
Supervisors / Foremen
Technicians
Secretaries
Draftmen
Heavy and Light Drivers
Welders
Labors
Fabricators
Mechanical Helper
Electricians
Rigger & Erecter
Instrument Technicians
Instrument Fitters
Spray Painter
Insulators
Steel Fixers
Safety Officers
03
02
02
01
10
13
09
03
35
30
50
21
05
10
05
07
07
05
05
06
02
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
GALLERY
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Container Trailer Portable House
Portable House Portable House
GALLERY
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Hangar Building Hangar Building
Hangar BuildingHangar Building
GALLERY
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Dump Truck
Cement Bulker Fuel Tank Semi-trailer
Low Bed Trailers
GALLERY
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Cash Transit Vehicles
Garbage Truck. Water Tank
Cash Transit Vehicles
SAFETY PROGRAM
Health and safety management system
Environmental policy
Introduction
Safety Induction
Employee Responsibilities
Manager Responsibilities
HSE Coordinator
Safety Representative
Employees Practices in Yards or Suppliers Premises
Drug Abuse Policy
Smoking
Maximum Working Hours
Personnel Protective Equipment’s
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Al Shamrani Factory is fully committed to meeting its responsibilities to the
requirements of clients and local legislative requirements both as an employer
and as a company. To achieve these objectives it has appointed a designated
member of staff to be responsible for occupational health and safety, to keep
workplace health and safety authorities wherever necessary, and keep the com-
pany and board of directors abreast of new legislation, regulation to ensure
ongoing compliance with the law.
The main responsibility for health and safety lies with the chief executive officer.
The company is bound by any acts and or omissions of the chief executive
officer, any manager, giving rise to legal liability, provided only that such acts and
or omissions arise out of in the course of company business.
To comply with its statutory and common law duties, Mohammed Fahd Al-Ajmy
Cont. Est. has arranged insurance against liability for death, injury and or disease
suffered by any of its employees arising out of and in the course of employment,
SAFETY PROGRAM
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Al Shamrani Factory employees agree as part of their contract of employment, to
comply with their individual duties under local legislative requirement and will
cooperate with employer to enable him to carry out his health and safety duties.
Failure to comply with health and safety duties, regulation, work rules and proce-
dures regarding health and safety, on the part of any employee may lead to
dismissal, in case of serious breaches or repeated breaches, such dismissal may
be instant and without prior warning.
Al Shamrani Factory has instituted a system of reporting accidents, diseases and
dangerous occurrences.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Al Shamrani Factory will comply with its duties towards employees under local
legislative requirements so far as is reasonably practicable in order to:
Provide and maintain plant and systems of work that are safe and without risks
to heath, a safe place of work and a safe system of work.
Ensure the safety and absence of risks to health in connection with the use,
handling, storage and transport of articles and substances.
Provide such information, instruction, training and supervision as may be neces-
sary to ensure the health and safety at work of its employees.
Make regular risk assessments available to employees and take appropriate
preventative / protective measures. Provide employees with health surveillance
where necessary.
Appoint competent personnel to secure compliance with statutory duties and
to undertake reviews of the policy as necessary.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Al Shamrani Factory will comply with its duties towards employees under local
legislative requirements so far as is reasonably practicable in order to:
Provide and maintain plant and systems of work that are safe and without
risks to heath, a safe place of work and a safe system of work.
Ensure the safety and absence of risks to health in connection with the use,
handling, storage and transport of articles and substances.
Provide such information, instruction, training and supervision as may be
necessary to ensure the health and safety at work of its employees.
Make regular risk assessments available to employees and take appropriate
preventative / protective measures. Provide employees with health surveil-
lance where necessary.
Appoint competent personnel to secure compliance with statutory duties
and to undertake reviews of the policy as necessary.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
We shall comply fully with and keep abreast of all legal obligations connect-
ed with our operations past, present and future.
We will ensure that new projects are managed in a way which minimizes
their impact on the environment.
We shall make efficient and environmentally responsible use energy and
water
Environmental policy
Al Shamrani Factory comprises inspection and projects division. Within these
divisions we provide a comprehensive service of inspection, auditing, expedit-
ing, procurement, provision of personnel, training to clients of international
standing throughout kingdom of Saudi Arabia.
We are determined to ensure that environmental benefits strengthen the
spectrum of our operation. Specifically we will do this by the application of
environmental management within the framework of the company and
through the efficient operation of Al Shamrani Factory by providing resources
and expertise to make this a practical reality.
In order to achieve this aim Al Shamrani Factory has the following key objective.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
These commitments will be demonstrated through the introduction of policies
and practices.
Their effectiveness will be monitored by evaluating the company’s environmen-
tal performance the results of which will communicate to employees and the
community.
This policy statement will be subjected to annual review and is made available
to all employees and other interested parties.
Promote environmentally responsible procurement of goods and service.
Minimize waste production as far as is practicable, to reuse or recycle waste
where appropriate.
To minimize the impact of transport on the environment arising from its
own vehicles
To maintain its building and grounds in an environmentally sensitive way.
To raise awareness amongst our employee on the company’s environmen-
tal activities and performance.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Introduction
This document provides an overview how Al Shamrani Factory expects employ-
ee to work safely.
Identifies the issues which concern our employees for health and safety.
Identifies the responsibilities of our organization.
Safety Induction
All personnel working for Al Shamrani Factory will be given their own copy of
this safety manual when they join our company. We recognize that you will have
the necessary qualification, competence and experience to carry out the role
you a tasked with however Al Shamrani Factory will also provide you with specif-
ic instructions and guidance relating to your new worksite or office.
Direct manager is responsible for conducting a “Safety Induction “as soon as
practicable.
NB: The safety induction shall include the following as appropriate to your work-
site however where this involves an assignment to a supplier’s work or a custom-
er / client facility then their safety induction process will take precedence.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Organization at the workplace.
Emergency response plan and its location.
Emergency alarms
Work areas including fire muster, welfare and first aid.
Firefighting equipment and alarm points.
Safety signs and their meaning.
Safety representative.
Safety notice board.
Smoking policy and smoking /no smoking areas.
Location general information including traffic information.
Safety documentation relevant to the work task.
Hazard identification and supplier risk assessment checklists.
Safe systems of work.
Handing of dangerous substances.
Protective clothing and what you must use in your job.
Reporting safety observations.
Incidents, accidents and injuries.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Reports all unsafe events or equipment however minor and bring it to the
attention of your manager.
Beware of safety issues even after work has finished.
Take an active part in the promotion of working safely.
Do not take short cuts or become complacent in your work tasks with
regard to safety.
Think about the hazards to yourself and others before you begin a work task
and take the necessary precautions.
Make sure that you carry out your work activities in accordance with
procedures and policies approved by Al Shamrani Factory or in the case of
an assignment then this will be in accordance with the supplier, customers
/ clients safety management system which will be explained to you on arriv-
al at their workplace..
SAFETY PROGRAM
Employee Responsibilities
Al Shamrani Factory employees have a responsibility to ensure the safety and
welfare of themselves and their co-worker as well as preventing damage to
equipment or the environment.
These responsibilities include minimum as the following:-
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
NB: If unsafe acts / conditions are observed, it is your responsibility to report
those hazards immediately to that supplier or client’s management.
Immediately after you must then contact Al Shamrani Factory Management
reporting the same unsafe acts / conditions observed, Al Shamrani Factory Man-
agement following analysis and assessment will inform you of your next course
of action.
This may consist of the following if not already in place.
1. Request that you remove yourself immediately from the area to a safe distance
from the unsafe acts / conditions.
2. Make specific recommendations. e.g. stopping your work, safe distance, addi-
tionalPPE requirements.
3. Requesting that you complete a risk assessment checklist to formally identify
those unsafe acts / conditions.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Manager Responsibilities
Managers have overall responsibility and accept that they will be held accounta-
ble for the safety of employees.
Their responsibilities include such safety activities as conducting and participat-
ing in risk assessments, providing safe operational procedures, providing safe
equipment where appropriate, conducting safety induction / familiarization
training.
HSE Coordinator
Al Shamrani Factory has a HSE Coordinator who has the responsibility to ensure
the implementation of the safety and Environmental policies.
Provide additional safety consultants as required to provide additional
support and expertise.
Provide independent audits.
Coordinate risk assessments.
Coordinate accident incident reporting and statistics.
Assist with investigations.
Act as a focal point on all HSE issues including first aid.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Safety Representative
Al Shamrani Factory encourages the active participation of all employees in
promoting safe working practices throughout all our operations.
Al Shamrani Factory believe that its operations and competent employees all
contribute towards providing a safe place of work and as such Al Shamrani
Factory provides regular forums to enable our employees to discuss issues of
concern and make proposals to improve safety performance.
Safety representatives are usually identified to all employees during their induc-
tion and on the safety notice board or similar.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Employees Practices in Yards or Suppliers Premises
In addition to any specific instruction communicated during a safety induction
or as directed by safety representative, all Al Shamrani Factory employees shall
observe the following:-
Do not consider entering any designated danger areas unless this is essential
for the performance of the work and most importantly it is safe to do so.
Do not consider entering any designated danger areas unless authorization
has been obtained from a responsible representative of the works / site.
In pipe mills and other factories keep to the marked out or railed walkways.
Do not pass within barriers surrounding presses or similar machines.
Take care when materials are being offloaded or stacked.
Do not pass between pipe stacks.
Keep hands and feet from between pipe and other stacked materials.
Observe speed restrictions when driving in plants or work sites.
Watch out for overhead loads and obey signals from banksman / operators.
Wear personal protective equipment (PPE) e.g. protective helmet, safety
boots / shoes, coveralls, safety glasses / goggles, gloves ear protectors
selected in accordance with the type of hazards involved.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
Never approach grinding, welding or other obvious hot work operations
without the appropriate approval and personal protective equipment (PPE).
When radiography is being carried out observe all safety signs, barriers,
audible alarms and verbal instruction.
Ensure that all scaffolding and ladders are tagged and safe to use before you
climb onto them and correct working at height procedures are followed.
Do not enter any confined spaces unless a permit to work system is in place
and a risk assessment has been carried out.
Do not work at height above 6.5 meters unless the ladder is caged, a safety
rail is present or a safety line is used in conjunction with a harness.
Take extreme care when in the presence of high pressure liquids and gasses
/ hydro tests / gas leak test obey all barriers and safe systems of work.
Do not approach or use any dangerous substances without first ensuring
that the substances have been assessed by a responsible person and that all
precautions have been identified.
SAFETY PROGRAM
When on site always ensure that you know the escape routes, first aid points and
emergency contacts and also ensure that you seek out advice on:
Permit to work systems
Lifting operations
Manual Handling
Dangerous Substances
Working at Heights
Personal Protective Equipment (PPE)
Confined Spaces
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Drug Abuse Policy
Al Shamrani Factory prohibits the possession of, or drinking of alcohol at all
times. The possession or use of illegal non-prescribed drugs is prohibited at all
times. Breach of this policy is a disciplinary offence, which may lead to employee
dismissal.
Smoking
Al Shamrani Factory operates a policy of having designated smoking areas
where smoking may be permitted these areas are in place to minimize the risk
from passive smoking and also to prevent the risk from accidental fires.
Employees who smoke must also request the location of similar designated
smoking areas when visiting suppliers / clients sites or offices, in many cases the
carrying of lighters or matches is prohibitive.
Always comply with “No Smoking” signs.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Mobile Phones Use Whilst Driving
Whilst driving you should not use a hand-held phone as you are not in full
control of the vehicle, the phone should be switched off at all times whilst you
are driving.
It is not recommended that hand-free phones are used as these can also cause a
distraction as you will not be concentrating fully on the road / traffic conditions.
For the safety of other road users and yourself please use voicemail whilst driving
and retrieve your messages at the end of the journey.
Maximum Working Hours
As part of our health and safety system, envisaged working more than a twelve
hour day require approval from either the Al Shamrani Factory or clients direct.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Personnel Protective Equipment’s
Clothing
Al Shamrani Factory employees regularly working on assignments in the plant
work areas shall wear long sleeve shirts & paints.
For specific exposures that may pose unusual hazards, special types of protective
clothing shall be provided. Examples of this are leather aprons for welding and
chemical resistant jackets or coveralls for acids and caustics.
Safety footwear
Al Shamrani Factory employees working in plant work areas shall wear safety
footwear (i.e. safety shoes or boots).
The safety footwear shall meet the ANSI Z41 safety standard. Dielectric boots are
mandatory in the cell line / membrane areas.
Al Shamrani Factory employees shall be issued one pair of safety footwear initial-
ly and will be issued one pair each year. Worn out footwear can be replaced with
approval of employees supervisor.
Non-slip soles shoes shall be worn for working on slick surfaces, such as the top
of tanks, etc.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Eye protection
Al Shamrani Factory employees entering the plant work areas shall wear
approved eye protection (e.g chemical goggles or safety glasses). Chemical gog-
gles shall be carried on each person entering plant work areas and used for
added eye protection and entry into goggle areas.
Al Shamrani Factory shall furnish one pair of prescription safety glasses including
an industrial safety frame to employees at company expense.
Spectacles with side shields that meet ANSI Z.87.1-1989 specification (or
equivalent) shall be mandatory for personnel exposed to flying particles and
foreign bodies.
The tinted safety glasses shall not be permitted to be worn at night, or indoors.
All employees shall wear eye and face protection in all areas where personnel are
exposed to flying particles, glare, liquids / chemicals, injurious radiation, or a
combination of these hazards.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Safety Hard Hats
Al Shamrani Factory employees entering the plant work areas shall wear safety
hard hats except inside office buildings control rooms and the security main
gate. Under certain conditions (e.g. overhead hazards), wearing your safety hard
hats in buildings may be required.
Hard hats for protection from impact and penetration by falling or flying objects,
electric shock and burns shall meet the specification of ANSI Z89.1-1997. Appro-
priate class of helmets as given in ANSI Z89.1-1997 shall be used for the electrical
voltage being handled.
Employees shall wear head protection (hard hats) in all areas where there is a
possible danger of head injury from impact by falling or flying objects, or
electrical shock and burns.
Users should visually inspect hardhats for components (shells, suspension, head-
bands, sweatbands, etc.) prior to use. Any hard hats with dents, cracks, penetra-
tions or other damage due to impact, rough treatment, or wear that might
reduce the degree of safety originally provided shall be discarded from service.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Safety hardhat headband and suspension system shall be adjusted so that the
hat is firmly on the head and that there is no interference with the suspension
system.
Liners designed to be worn with hardhat are available for issue from the ware-
house. Other lining material may interfere with the proper functioning of the
headband and suspension system and shall not be used.
To help secure your safety hard hats while working at height, confined spaces, or
high wind the use of a strap or tightening down on the suspension ratchet is
recommended.
Hearing Protection
All areas / activities where the noise level is 90 DBA or greater shall be estab-
lished and clearly identified. All such areas / activities shall be designated for
mandatory wearing of hearing protection. Work operations with noise level
equivalent to 90 DBA or greater shall be posted as hearing protection designat-
ed areas.
Hearing protection shall be selected to reduce the noise level upto 90 DBA.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Hand & Finger Protection
Gloves shall be used for hands and fingers protection. The glove type shall be
selected depending on the work environment and the material handling.
Cotton gloves shall provide protection against dirt and chafing.
Natural rubber gloves, neoprene synthetic rubber gloves and vinyl gloves shall
be worn by personnel forprotection against various chemicals.
Leather gloves with gauntlets shall be worn by welders and for protection
against moderate heat, ultraviolet, infrared rays and sharp or rough objects.
Barrier cream can be used as hand and fingers protection “(e.g. water repellent
barrier creams and solvent repellent barrier creams). They are not a substitute for
gloves and shall only be used when there is occasional and minor contact with
a solvent or around rotating machinery where gloves cannot be worn because
of the hazards. IS&S Industrial hygienist shall be contacted for more information.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Rubber gloves, which meet the ASTM 1991 standard specification for leather
protectors for rubber insulating gloves and mittens, shall be worn by electricians
working on live or energized electrical circuits. They shall be worn under a pair of
leather gloves.
Inhalation / Respiratory Protection
Canister and Cartridge masks
Masks and its Canister / Cartridge shall meet the National Institute for Occupa-
tional Safety and Health (NIOSH) standard, for the hazardous gas that is to be
handled.
Appropriate Canister / Cartridge shall be connected to gas mask. Consideration
shall be given to the concentration and type of hazardous / toxic gas that has to
be handled when selecting the canister / cartridge.
A system shall be in place to verify the validity of the canister / cartridge. All
expired canister/cartridges shall be taken out of service and disposed off.
Canister / cartridge masks shall not be used in atmosphere containing less than
19.5% oxygen.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
Canister / cartridge mask shall not be used in areas wher he concentration of
hazardous gas is in excess to the maximum permitted limit of the canister /
cartridge that is connected to the mask.
Dust Mask
Dust masks shall not be used in atmosphere containing toxic / hazardous gas
above its Threshold Limit Value (TLV).
Dust mask shall provide adequate protection against greater than 0.3 micron
size particles and dry oil or non-oil based aerosols.
Dust masks shall meet NIOSH standard 42 CFR Part 84.
High Elevation Protection.
Safety harnesses / Lifelines.
Use of safety belt shall not be permitted.
Safety harnesses / Lifelines shall meet the NFPA 1983 fire service Life harness and
hardware standard and OSHA 29 CFR 1926.500, subpart M.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
SAFETY PROGRAM
The user shall inspect safety harnesses / lifelines for obvious defects or evidence
of mistreatment, prior to use. Safety harnesses and lanyards that received an
impact load shall be immediately removed from service until subjected to the
above NFPA standard inspection.
Lifeline (minimum 19 mm rope) shall be supported independently of the
scaffold, carriage, or platform from which the work is being done. The lifeline
shall be tied off as short as the necessary movement of the worker will permit, in
order to limit the length of any possible free fall. An anchor point shall be capa-
ble of supporting the potential impact load of a worker’s fall.
Safety harness with lanyard, meeting the NFPA fire service life harness and hard-
ware standard, shall be used by personnel anytime it is necessary to perform
work from an elevated area above 2 meters which does not have a guard rail,
safety net, or any other items to prevent falling.
Safety harnesses / lifelines that come in contact with chemicals during use shall
be cleaned immediately and report to supervision.
Safety harness and buckles shall be fastened securely.
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
CERTIFICATES
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
CERTIFICATES
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES
CERTIFICATES
MOHAMMED O. ALSHAMRANI FACTORY FOR METAL INDUSTRIES