Upload
jeane
View
219
Download
0
Embed Size (px)
Citation preview
7/23/2019 molteni-505-datasheet (4)
1/18
505 is a carrier shoulder system with an extensive range of modular furnishings in 7 widths, 3 depths and
9 heights, designed to house books and a television. The finishes, matt or glossy lacquered or woods and
glasses can be mixed and matched to obtain different solutions in order to answer to the modern needs. As
well as the standard hinged opening with handle, 505 also has hinged doors, internal and external drawers,
flap doors with pressure opening, sliding doors and vertical sliding doors. To complete the system, there are
multimedia compartments, different worktops, but also the possibility to compose set of containers, placed
directly on the floor or hung just above floor level.
NICOLA GALLIZIA 2012
505
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
DATASHEET
REGISTEREDDESIGN
IX.2015
1
15
7/23/2019 molteni-505-datasheet (4)
2/18
MODULARITY
Measurements
Wall to wall widths:
315 - 473 - 630 - 945 - 1260 - 1417 - 1890 + 28 mm for end piece12 3/8- 18 5/8 - 24 7/8 - 37 1/4 - 49 5/8 - 55 3/4- 74 3/8+ 1 1/8
Heights:
397 - 717 - 1037- 1357 - 1677- 1997 - 2317 - 2637 - 2957 mm
15 5/8 - 28 1/4- 40 7/8 - 53 3/8 - 66 - 78 5/8 - 91 1/4 - 103 7/8 - 116 3/8
Structure depth:
304 - 400 - 540 mm (12 - 15 3/4 - 21 1/4)
Depth with pressure opening th 40(1 5/8) / glass doors with shaped profile:
348 - 444 - 584 mm (13 3/4 - 17 1/2 - 23)
Depth with pressure opening or handle th 22(7/8):
330 - 426 - 566 mm (13 - 16 3/4 - 22 1/4)
Depth with glass pressure opening th 5(1/4):
313 - 409 - 549 mm (12 3/8 - 16 1/8 - 21 5/8)
Heights and depth of the units
resting on the floor
Notes
A minimum extra height space of 30 mm (1 1/8)is required forinstallation purposes; the same applies for the width if placed
in a niche. Width, height, depth reductions are made with
an interval of 32 mm (1 1/4).
The minimum width is 315 mm (12 3/8), therefore
no reductions is forseen for units of 315 mm (12 3/8).
No reduction possible for:
Internal and external drawers
Sliding doors
Glass hinged doors
Vertical sliding doors
Flap doors th 40 (1 5/8) and th 22 (7/8)
Hinged doors th 40 (1 5/8)
TV compartment D 400 (15 3/4)
722 7/8
0
2957116 3/8
2637103 7/8
231791 1/4
199778 5/8
167766
135753 3/8
103740 7/8
71728 1/4
39715 5/8
304 12400 15 3/4
540 21 1/4
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
2
DATASHEET
REGISTEREDDESIGN
IX.2015
505
NICOLA
GALLIZIA
2012
15
7/23/2019 molteni-505-datasheet (4)
3/18
FINISHES
Wood grain
Pressure opening th 40
- HORIZONTAL GRAIN for vertical sliding doors,drawers and flap doors
- HORIZONTAL AND VERTICAL GRAIN for
hinged and sliding doors
Pressure opening th 22
- HORIZONTAL GRAIN for drawers and flap doors
- VERTICAL GRAIN for hinged doors
Handle opening th. 22
- HORIZONTAL GRAIN for drawers
- VERTICAL GRAIN for hinged doors
Handle
type B
handle opening th 22 (7/8)
(always horizontally positioned).
Upon request can be mounted on a
vertical sliding door
finishes:
- shiny chrome
- black chrome
- pewter colour
section A-A
matt
lacquer
colours
glossy
lacquer
colours
woods special
woods
transparent
glass
hinged sliding sliding
coloured
glass
coloured
etched
glass
shiny
aluminium/
black chrome/
pewter colour
structure and plinth
bridges
backs
rear finishing panels
internal drawer units
door opening th. 40 (hinged/sliding/flap/vertical sliding)
doors/external drawers with handle or pressure opening th. 22
glass doors with shaped profile
doors/external drawers with pressure opening th. 5
shelves
tops
central finishing tops th. 40
backs for TV
trim
glass
components
finishes
Matt
lacquer
BC chalk white
AV ivory
PE pearl
DN dune
PL platinum
PB lead
NE blackBO bordeaux
AT anthracite
SE mustard
SI silica
DO dolomite grey
AL clay
MK moka
CM caramel
CZ light blue grey
SA sand
RU ruby
CI cadmium
Coloured etched
glass
BC chalk white
PE pearl
DN dune
PL platinum
PB lead
NE black
BO bordeauxAT anthracite
SE mustard
SI silica
DO dolomite grey
AL clay
MK moka
CM caramel
CZ light blue grey
SA sand
RU ruby
CI cadmium
Glossy
lacquer
BC chalk white
PE pearl
DN dune
PL platinum
PB lead
NE black
BO bordeauxAT anthracite
SE mustard
SI silica
DO dolomite grey
AL clay
MK moka
CM caramel
CZ light blue grey
SA sand
RU ruby
CI cadmium
Woods
EU eucalyptus
RG grey oak
RN black oak
Special
woods
OC light elm
OS dark elm
Coloured glass
BC chalk white
PE pearl
DN dune
PL platinum
PB lead
NE black
BO bordeaux
AT anthraciteSE mustard
SI silica
DO dolomite grey
AL clay
MK moka
CM caramel
CZ light blue grey
SA sand
RU ruby
CI cadmium
colours
22 7/8
8 3/8
A
A
25 1 hole 64 2 1/2
25 1100 4
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
3
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
7/23/2019 molteni-505-datasheet (4)
4/18
TECHNICAL INFORMATION
SIDES, SHELVES TH. 28, BACKS
Chipboard covered with Oak (Quercus), Eucalyptus (Eucalyptus globulus) or melamine painted in colours fromthe Molteni range.
BASEBOARDAnodised extruded aluminium painted in colours from the Molteni range or covered with Oak or Eucalyptus.
WOODEN DOORS TH. 22 AND EXTERNAL DRAWER FRONT TH. 22Chipboard covered with Oak, Elm (Ulmus rubra), Eucalyptus or melamine painted in colours from the Molteni Range.
DOOR AND DRAWER FRONT TH. 40Honeycomb core wood panel covered in Oak, Elm, Eucalyptus sliced wood veneer or melamine facing, paintedin the colours of the Molteni Range.
BACKS FOR TVChipboard covered with Oak, Elm, Eucalyptus or melamine painted in colours from the Molteni range.
GLASS DOORS WITH SHAPED PROFILEAnodised extruded aluminium frame. Toughened glass 5 mm thick, clear, coloured in colours from the Molteni
Range.
GLASS DOORS AND GLASS DRAWER FRONT TH. 5Chipboard covered with painted melamine with applied 5 mm thick tempered crystal painted in colours fromthe Molteni Range.
WOODEN TOP TH. 10MDF covered with Oak, Elm, Eucalyptus sliced wood or melamine covered, painted in colours from the MolteniRange.
GLASS TOPTempered glass (th. 8 mm) with edge in extruded aluminium or tempered glass (th. 10 mm) painted in thecolours of the Molteni Range.
INSIDE DRAWER BOTTOM AND SIDES
Chipboard covered with melamine.
HANDLES AND WIRE HOLEIn several materials and finishes available.
GLASS SHELVES8 mm thick tempered clear crystal.
LADDERPainted aluminium.
SLIDING DOOR TRACK, BRIDGE BARAnodised extruded aluminium (several finishes).
1
9 9
3
8
8
4
8
7
5
6
2
2
10 10
BOTTOM
SIDES
DRAWER
FRONT
1 BACK
2 SIDE
3 SHELVES TH. 28
4 PLINTH OR SLIDING TRACK
5 TV BACK
6 BRIDGE BAR
7 TOP
8 DOORS TH. 40
9 DOORS TH. 22
10 EXTERNAL DRAWER
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
4
DATASHEET
REGISTEREDDESIGN
IX.2015
505
NICOLA
GALLIZIA
2012
15
7/23/2019 molteni-505-datasheet (4)
5/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
5
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
OPEN CORNER COMPOSITIONS
Features
In order to create the compositions shown here, the partitions (always in D 304 12) closeto the connection, must be positioned as illustrated in options A and B.
To calculate the price of the plinths, please note that the length is the same as the base.
These corner compositions are only available in the depth of 400 (15 3/4).
The sections between the two compulsory central partitions cannot be closed by
any kind of fronts and are always without back panels.
Internal corner
No slide rail
A
A
A
B
B
The section between
the two mandatory
central partitions has a
load capacity of 10 Kg,
evenly distributed
Features
In order to create the compositions shown here, the partitions (always in D 304 12) close
to the connection, must be positioned as illustrated in options A and B.
The price of one ZO/44 for completing the corner has to be added to the price of the plinths.
These corner compositions are only available in the depth of 400 (15 3/4).
The sections between the two compulsory central partitions cannot be closed by
any kind of fronts and are always without back panels.
External corner
No slide rail
A
A
A
B
B The section between
the two mandatory
central partitions has a
load capacity of 10 Kg,
evenly distributed
7/23/2019 molteni-505-datasheet (4)
6/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
6
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
INTERNAL DRAWER UNITS
For open compartments, sliding doors and glass hinged doors
with shaped profile
The internal drawer units can be positioned between two shelves th. 28 mm (1 1/8)(example A)or between two tops with th. 10 mm (3/8)(example B). These 10 mm (3/8) tops are specific
for these internal drawer units.
All drawers are always with pressure opening and always fully extractable.
If the compartments are open, or closed by a sliding door, the drawer unit is flush with the
structure. When the internal drawer units are behind a glass hinged door they are recessed
of 18 mm (3/4) and aligned with the internal shelves.
The compartment that holds the internal drawer unit must always have a back
panel or a rear finishing panel.
Example A
Example B
cover/standard shelfth. 28 (1 1/8)
th. 22 (7/8)
th. 22 (7/8)
standard shelfth. 28 (1 1/8)
601/91623 5/8/36
601/91623 5/8/36
525/840
20 5/8/ 33
525/84020 5/8/ 33
281 1/8
281 1/8
281 1/8
281 1/8
1465 3/4
1465 3/4
1465 3/4
1465 3/4
103/8
103/8
103/8
103/8
103/8
103/8
H 29211 1/2
H 29211 1/2
382/522
15/ 20 1/2
382/52215/ 20 1/2
364/50414 3/8/ 19 7/8
364/50414 3/8/ 19 7/8
For compartments with wood hinged doors 22 mm (7/8) pressure opening
or with handle
The internal drawer units are always positioned between two shelves th. 28 (1 1/8).
All drawers are always with pressure opening and always fully extractable.
The internal drawer units are recessed of 18 mm and aligned with the internal shelves.
The compartment that holds the internal drawer unit must always have a back
panel or a rear finishing panel.
Example
cover/standard shelfth. 28 (1 1/8)
th. 22 (7/8)
standard shelfth. 28 (1 1/8)
525/84020 5/8/ 33
381 1/2
381 1/2
183/4
H 29211 1/2
364/50414 3/8/ 19 7/8
601/91623 5/8/36
80 3 1/8
7/23/2019 molteni-505-datasheet (4)
7/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
7
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
BRIDGES
Bridges, available in various widths and depths of 304 and 400,
can be composed with either a support bar or fixed to the wall.
Upper and lower shelves are always full size and the internal subdivision
must be made based on the same building methods as for modulesW 1260-1417-1890 (internal shelf max W 916 mm).
A bridge D 400 can also be subdivided internally by inserting
components D 304.
bar
bar
wall attachment wall attachmentwall attachment
bar
Example 1 Example 2 Example 3
Wall attachment
Wall attachment can be completed with an invisible mount system
inserted in the central structural panels. A bridge with full-height
central structural panels (see examples 1 and 2) requires a wallmount for each panel. A bridge with central structural panels for a
H 1 module (see example 3) must be provided with a number of wall
mounts distributed over the entire height of the bridge, privileging the
lower part. The central structural panel with the wall mount must be
accessible from above for adjustments, and therefore another panels
cannot be placed on top of it. The price of the wall mount must be
added to the price of the central panels.
Notes
For wall mounted assembly (examples 1/2) a space of at least 18 cm from
the ceiling is required
max 916
Desk use TV shelf
Wall attachment capacity
The wall mount system includes nylon toggle bolts.
Wall attachment must be performed up to standard on walls (solid or
perforated) suitable for mounting bolts.
Molteni&C is not responsible for any attachments that do not comply
with the aforementioned information.
Upon request a chemical bolt kit is available as indicated on theprevious page (minimum wall thickness of 100 mm).
Max load per mount of 150 kg uniformly distributed.
Worktop D 400
Using the bridge bar and a specific back panel, the bridge shelves can
be transformed into a desk or a TV shelf.
The top and sides of adjacent lateral unit may be equipped with a wire
hole. Covered with a back panel the bar is always in black lacquer.
Above the bridge shelf a central finishing top can be added th. 40 in
depths 446 or 586.
back panel
wire hole
back panel
wire hole
7/23/2019 molteni-505-datasheet (4)
8/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
DATASHEET
REGISTEREDDESIGN
IX.2015
15
8
505
NICOLA
GALLIZIA
2012
H-FI COMPARTMENT D 400
By using module widths of 1260-1417-1890 a Hi-Fi compartment can
be created which can be closed by sliding door, or by flap door, or by
flap door + vertical sliding door. The back of the Hi-Fi compartment is
specifically equipped for suspended TV or standing TV. This back canbe fixed or removed from the front part.
The structural shelf closing the Hi-Fi compartment must have the
bridge bar even if some wall mount are used.
The back is shorter than the Hi-Fi compartment height for the passage
of cables, (see details A and B).
TV signal receiver
The 18 sensor is always positioned in the lower part of the TV back.
Specify right or left when ordering. IR bars can only be placed in a
compartment adjacent or below the TV back (to be specified whenordering). The cost of a wire hole is not included. The bar can only be
fixed to the structural panels.
Wire Hole
The Hi-Fi compartment may be connected using a wire hole to adjacent
or lower compartments. The wire hole is located behind the TV back.
TV signal receiver system
IR sensor(right position)
detail A - Suspended TV
detail B - Resting TV
- open compartment
- flap door
- drawers (wire hole is not possible)
- hinged doors
IR bar
294
1231-1389-1861
TV back
H 3 modules and
H 4 modules only
for W 1861
7/23/2019 molteni-505-datasheet (4)
9/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
9
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
TV COMPARTMENTS WITH SHELVES D 400
TV compartments can be created using module widths of 1260-1417-
1890 and a height of 4 modules (1252 mm). These compartments can
be equipped with glass shelves at the top or at the bottom. The TV can
rest on a central shelf or a base, or be mounted to the back panel. Theback panel can be fixed or removed from the front part. The unit follows
the rules for bridge-style compositions: a bridge bar must be used.
Only one glass shelf can be installed in each groove on the back panel.
A rectangular wire passage is always provided in the position shown
on the back panel.
No central finishing tops can be placed on these TV compartments.
The shelves have a load capacity of 10 Kg, evenly distributed.
Examples of a TV compartment with shelves
TV signal receiver
The 18 sensor is always positioned in the lower part of the TV back.
Specify right or left when ordering. IR bars can only be placed in a
compartment adjacent or below the TV back (to be specified whenordering). The cost of a wire passage is not included. The bar can only
be fixed to the structural panels.
Wire passage
The TV compartment may be connected using a wire passage to
adjacent or lower compartments. The wire passage is located behind
the TV back.
- open compartment
- flap door
- drawers (wire passage is not possible)
- hinged doors
1231-1389-1861
1231-1389-1861
1231-1389-1861
1077-1235-1707
1077-1235-1707
1077-1235-1707
H 4 modules
mm 1252
H 4 modules
mm 1252
H 4 modules
mm 1252
H 952
=
=
=
=
=
=
H 142
H 142
H 142
H 139
IR sensor
IR sensor
IR sensor
IR bar
IR bar
IR bar
7/23/2019 molteni-505-datasheet (4)
10/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
10
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
VERTICAL SLIDING DOORS TH 40
The units in 505 compositions W 1260-1417 can be closed with
vertical sliding doors for H 2 modules. The upper and lower shelves
must be structural shelves with interruption in the back. The
central structural panels and internal shelves of the compartmentare always D 304 mm to enable the sliding of the door. The
subdivision of the central structural panels is according to the
indicated rules. The vertical sliding door cannot be used in units
D 304 mm. For the movement of the vertical sliding door, the
upper 2 compartments must remain open. The vertical sliding
mechanism is completely contained in the compartment for
H 2 or H 3 modules if paired with a flap door. It is possible to compose a
Hi-Fi compartment by using the vertical door together with the flap door
(total H of 3 modules). The bridge bar and the TV back are to be added.
Two vertical sliding doors cannot be placed side by side.
Example of flap on base
Example of flap door hinged to a structural shelf
Notes
The price of the vertical sliding elements includes the tracks attached
to the sides. Upon request, at no extra charge, the vertical sliding door
can be created with a type B handle fixed centrally at the bottom.
* wood only with horizontal grain
close
flap flap
vertical sliding
always open
D 304
open
mm7
5
close
flap
always open
vertical sliding
open
always open
7/23/2019 molteni-505-datasheet (4)
11/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
11
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
DOORS
pressure
and sliding opening th 40
pressure opening
th 22
glass door with
shaped profile
hinged and sliding doorsthis handle is not available
for external drawers
opening with the handle
th 22
pressure opening
glass th 5
EXTERNAL DRAWERS
Standard version comes with partially extractable runners.
Fully extractable runners are availables with a surcharge.
* wooden drawers only with horizontal grain
Notes
External drawers can be inserted into compartments with a height of
1 or 2 modules. A back panel of 16 mm th. and a pair of sides listed
below must be added.
Drawers placed on the base Drawers within the unit
1or2modules
1or2modules
pairs of sides
for insertionth. 14 mm
pairs of sidesfor insertionth. 14 mm
side
side
shelf
shelf
base unitwith plinth
7/23/2019 molteni-505-datasheet (4)
12/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
12
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
SAMPLE COMPOSITIONS
CDC01 (left comp.) CDC01 (right comp.)
CDC02
composition 1
finish: matt chalk white lacquer
composition 2
finish: matt chalk white lacquer
292
292
1292
292
2921
997
1997
1997
1916
drawer th. 22
drawer th. 40
sliding door th. 40
2 shelves SHM4/12
916 916
38081890 1890 28
1916
292
292
400
400
444
444
400
7/23/2019 molteni-505-datasheet (4)
13/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
13
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
CDC03
CDC04
composition 3
finish: matt chalk white lacquer
composition 4
finish: matt chalk white lacquer
1252
636
956
316
1997
400
400
1308
23
17
1009
444
444
28
1890
1417 945 1417
3804
3807
1417 473 28
vertical sliding door th. 40
flap th. 40
doorth. 40 doorth. 40
doorth. 40
doorth. 40
drawerth. 40
2 shelves SHM4/12
SAMPLE COMPOSITIONS
7/23/2019 molteni-505-datasheet (4)
14/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
14
DATASHEET
REGISTEREDDESIGN
IX.2015
505
NICOLA
GALLIZIA
2012
15
SAMPLE COMPOSITIONS
CDC05
CDC06
composition 5
finish: matt chalk white lacquer
doors in transparent glass with shiny aluminium profile
composition 6
finish: matt chalk white lacquer
sliding door in coloured glass with shiny aluminium profile
2317
1687
400
400
444
444
1417
945945 945473 473 28
473 473 473 473 28
3337
3809
vertical sliding door th. 40
flap th. 40
7/23/2019 molteni-505-datasheet (4)
15/18
Dimensions in millimeters and inches. The right to discontinue and make changes is reserved. This information is based onthe latest product information available at the time of printing.molteni.it
15
DATASHEET
REGISTEREDDESIGN
IX.2015
15
505
NICOLA
GALLIZIA
2012
SAMPLE COMPOSITIONS
CDC07
composition 7
finish: matt chalk white lacquer
doors in transparent glass with shiny aluminium profile.
1687
400
444
945 945 473 28473
2864
drawer th. 22
drawer th. 22
drawer th. 22
door th. 40 door th. 40 door th. 40
CDC08
composition 8
finish: matt chalk white lacquer
727
540
584
630 630630 630 28
2548
CDC09
composition 9
finish: matt chalk white lacquer
727
348
400
444
1417 473 473 282391
flap th. 40 door th. 22 door th. 22
7/23/2019 molteni-505-datasheet (4)
16/18
FINISHESMOLTENI&CRANGEIX.2015
CHALK WHITE
IVORY
PEARL
SILICA
SAND
PLATINUM
DUNE
CLAY
DOLOMITE GREY
BORDEAUX
RUBY
CARAMEL
MOKA
MUSTARD
CADMIUM
LIGHT BLUE GREY
LEAD
ANTHRACITE
BLACK
MATTLACQ
UER
OPENGRAINLACQUER
GLOSSYLA
CQUER
COLOURED
GLASS
ETCHEDCO
LOUREDGLASS
PLASTERL
ACQUERED
CARTAPAGLIALACQUERED
onlyGlissM
aster
only matt lacquerLESSLESS RED
7/23/2019 molteni-505-datasheet (4)
17/18
FINISHESMOLTENI&CRANGEIX.2015
The finishes shown are indicative and refer to the entire production range. We recommend that you consult the
Colour Range samples which shown the complete range of finishes, including those not shown here. Molteni&C
reserves the right to modify the range without warning.
BROWN ALUMINIUM
ANODISED ALUMINIUM
DWELL
DOOR FRAME, TRACK COVERING PROFILES
CEDAR
BLACK MARQUINA
AMERICAN WALNUT RED LAGUNA
BLACK OAK
EMPERADOR DARKGREY OAK
BLACK CHROME
METAL PARTS
GRES
DARK ELM
SHINY ALUMINIUM
LIGHT ELM
PEWTER COLOUR
WOODS
EUCALYPTUS WHITE CARRARA
ANTHRACITE
WHITE
MARBLES
7/23/2019 molteni-505-datasheet (4)
18/18
FINISHESMOLTENI&CRANGEIX.2015
ANTHRACITE
SILICA
DARK
LARIX DARK
HEMP
GREY
DARK BROWN
CARTAPAGLIA
GLISS MASTER FRONT
GLISS QUICK, GLISS WALK-IN FRONT
WHITE
PEARL NATURAL
GREY SHANTUNG
MINK
CHALK WHITE PEARL
WHITE SHANTUNG
IVORY
MILLERIGHE
GLISS QUICK FRONT
MILLERIGHE
GLISS QUICK, GLISS-UP STRUCTURE
SILICA
PLASTER only Gliss Master
MELAMINE STRUCTURE only Gliss Master
ECO SKIN only Gliss Master
only Gliss MasterLarix dark finish available also for Gliss Walk-In
where specifically indicated in the pricelist