Monitor LCD Samsung Model-RS24A

8/8/2019 Monitor LCD Samsung Model-RS24A

1/70

TFT-LCD M ON ITORRS21A*/RS24A*

Manual

SERVICE TFT-LCD M ON ITOR CON TEN TS

1. Precautions

2. Product Specifications

3. Disassembly & Reassembly

4. Alignment & Adjustments

5. Troubleshooting

6. Exploded View & Parts List

7. Electrical Parts List

8. Block Diagram

9. Wiring Diagram

10. Schematic Diagrams

11. Panel Description

CONFIDENTI


2/70

1-1-1 Warnings1. For continued safety, do not attempt to modify the

circuit board .

2. Disconnect the AC power and DC Power Jack before servicing.

1-1-2 Servicing the LCD M onitor1. When servicing the LCD Monitor Disconnect the

AC line cord from the AC outlet.

2. It is essential that service technicians have anaccurate voltage meter available at all times. Check the calibration of this meter periodically.

1-1-3 Fire and Shock HazardBefore returning the m onitor to the user, perform th efollowing safety checks:

1. Inspect each lead dress to make certain that theleads are not pinched or that hardw are is notlodged between the chassis and other m etal parts inthe monitor.

2. Inspect all protective devices such as nonmetalliccontrol knobs, insulating materials, cabinet backs,adjustment and compartm ent covers or shields,isolation resistor-capacitor networks, mechanicalinsulators, etc.

3. Leakage Current Hot Check (Figure 1-1):

WARNING:Do not use an isolation transformer during this test.Use a leakage curren t tester or a m etering systemthat complies with American National Standar dsInstitute ( ANSI C101.1, Leakage Current for

Appliances ), and Und erwriters Laboratories ( ULPublication UL1410, 59.7 ).

Figure 1-1. Leakage Current Test Circuit

4. With the unit completely reassembled, plug the ACline cord d irectly into a 120V AC outlet. With theunits AC switch first in the ON position and thenOFF, measure the current between a kn own earthground (metal water pipe, conduit, etc.) and allexposed m etal parts, including: metal cabinets,screwheads and control shafts. The currentmeasur ed sh ould not exceed 0.5 milliamp . Reversethe power-plug p rongs in the AC outlet and repeatthe test.

1-1-4 Product Safety NoticesSome electrical and mechanical parts have specialsafety-related characteristics which are often notevident from visual inspection. The protection they givemay not be obtained by rep lacing them w ithcomponents rated for higher voltage, wattage, etc. Partsthat have special safety characteristics are identified by

on schematics and p arts lists. A substitutereplacement that does not have the sam e safetycharacteristics as the recommend ed rep lacement p art

might create shock, fire and / or other hazard s. Productsafety is under review continuou sly and newinstructions are issued whenever ap prop riate.

RS21A* /RS24A* 1-1

CONFIDENTIAL

1 PrecautionsFollow these safety, servicing and ESD precautions to prevent dam age and to protect against potential hazards such aselectrical sh ock.

1-1 Safety Precautions

DEVICEUNDERTEST

TEST ALLEXPOSED METAL

SURFACES

(READING SHOULDNOT BE ABOVE 0.5mA)

LEAKAGECURRENT

TESTER

2-WIRE CORD

ALSO TEST WITHPLUG REVERSED

(USING AC ADAPTERPLUG AS REQUIRED) EARTH

GROUND

!


3/70

1-2-1 General Servicing Precautions1. Always unplug the units AC power cord from the

AC power sour ce and disconnect the DC PowerJack before attempting to:(a) remove or reinstall any componen t or assembly,(b) disconnect PCB plugs or con nectors, (c) connecta test compon ent in parallel with an electrolyticcapacitor.

2. Some components are raised above the printedcircuit board for safety. An insulation tube or tapeis sometimes used. The internal wiring issometimes clamp ed to p revent contact withthermally hot components. Reinstall all suchelements to their original position.

3. After servicing, alway s check that the screws,components and wiring have been correctlyreinstalled. Make sure that the area arou nd th eserviced part has not been damaged.

1. Immediately before handling any semiconductorcomponents or assemblies, drain the electrostaticcharge from your body by touching a known earthground . Alternatively, wear a discharging wrist-strap d evice. To avoid a shock hazard , be sure toremove the wrist strap before applying power tothe monitor.

2. After removing an ESD-equipped assembly, place iton a condu ctive surface such as aluminum foil toprevent accum ulation of an electrostatic charge.

3. Do not use freon-propelled chemicals. These cangenerate electrical charges sufficient to damage

ESDs.4. Use only a grounded-tip soldering iron to solder or

desolder ESDs.

5. Use only an anti-static solder removal device. Somesolder removal devices not classified as anti-staticcan generate electrical charges sufficient to damageESDs.

4. Check the insulation between the blades of the ACplug and accessible conductive parts (examples:metal pan els, input term inals and earp hone jacks).

5. Insulation Checking Procedure: Disconnect thepower cord from the AC source and turn the powerswitch ON. Connect an insulation r esistance meter(500 V) to the blad es of the AC p lug.

The insulation resistance between each blade of theAC plug and accessible conductive parts (seeabove) should be greater than 1 megohm.

6. Always connect a test instruments ground lead tothe instrum ent chassis ground before connectingthe positive lead; always r emove the instrumentsground lead last.

6. Do not remove a replacement ESD from itsprotective package until you are r eady to install it.Most replacement ESDs are p ackaged with leadsthat ar e electrically shorted together by condu ctivefoam, aluminum foil or other cond uctive materials.

7. Immediately before removing the protectivematerial from the leads of a replacement ESD,touch the protective material to the chassis orcircuit assembly into which the device will beinstalled.

Caution: Be sure no pow er is applied to thechassis or circuit and observe all

other safety precautions.8. Minimize body motions when handling

unp ackaged replacement ESDs. Motions such asbrushing clothes together, or lifting your foot froma carpeted floor can generate enough staticelectricity to damage an ESD.

1 Precautions

1-2 RS21A* / RS24A*

CONFIDENTIAL

1-3 Electrostatical ly Sensitive Devices (ESD) PrecautionsSome semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonlycalled Electrostat ically Sensitive Devices (ESD). Examples of typ ical ESD devices are int egrated circuits and some field-effect transistors. The following techniques will reduce the incidence of component damage caused by static electricity.

1-2 Servicing PrecautionsWARNING: An electrolytic capacitor installed with the wrong polarity might explode.

Caution: Before servicing units covered by this service manual, read and follow the Safety Precautionssection of this manual.

Note: If unforeseen circumstances create conflict between the following servicing precautions and any of thesafety p recautions, always follow the safety p recautions.


4/70

CONFIDENTIAL

2 Product Specifications

2-1 Specifications

LCD Panel TFT-LCD panel, RGB vertical stripe, normally black TFT-LCD panel, RGB vertical stripe, transmissive, (21.3-Inch) viewable, 0.27 pixel pitch transmissive, (24.06-Inch) viewable, 0

Scanning Frequency Horizontal : 30 kHz ~ 85 kHz (Analog)Vertical : 55 Hz ~ 85 Hz

Display Colors 16,777,216 Million colors

Maximum Resolut ion Horizontal : 1600 Pixels 1920 PixelsVertical : 1200 Pixels 1200 Pixels

Input Video Signal Analog, 0.7 Vp-p 5% positive at 75 ,internally terminated

Input Sync Signal Type : Seperate H/V sync, Composi te H/V, Sync-on-GreenLevel : TTL level

Maximum Pixel Clock rate 162 MHz 193 MHz

Active DisplayHorizontal/Vertical

AC power voltage & Frequency AC 90 ~ 264 Volts, 60~50 Hz 3 Hz

Power Consumption 110W (max) 120W (max)

DimensionsUnit (W x D x H) 25.98 x 8.38 x 18.58 Inches (568.5 x 213 x 472 mm)25.98 x 8.38 x 18.58 Inches (660 x 213 x 472 mm)Carton (W x D x H) 30.55 x 24.01 x 13.62 Inches (687 x 608 x 340 mm)30.55 x 24.01 x 13.62 Inches (776 x 610 x 346 mm)

Weight (Net / Gross)Environmental Considerations Operating Temperature : 50F ~ 104F (10C ~ 40C)

Humidity : 10 % ~ 80 %Storage Temperature : -4F ~ 113F (-20C ~ 45C)Humidity : 5 % ~ 95 %

TV System

Sound Characteri st ics Max Internal speaker Out : Rightc 5 W / Leftc 5 W

Bass control Range : -6 2dB ~ +6 2dB TREBLE control Range : -10 2dB ~ +10 2dB Output f requency : RFc 80 Hz~15 KHz / A /Vc 80 Hz~20 KHz Line out : RFc 80 Hz~15 KHz / A /Vc 80 Hz~20 KHz

SyncMaster RS21A* / RS24A* comply with SWEDAC (MPRII) recommendations for reduced electromagnetic f ields. Designs and specifications are subject to change wi thout prior notice.

RS21A* /RS24A* 2-1

ItemDescription

RS21A* RS24A*

518.4 3 mm / 324 3 mm

10.0 kg (26.78 lbs) / 20.2 kg ( 49.6 lbs) 12.15 kg (26.78 lbs) / 22.5 kg ( 49.6 lbs)

Antena Input 75 , Coaxial Cable

Tunning Frequency SynthesizeColor PAL, SECAMSound NICAM, A2 STEREO


5/70

CONFIDENTIAL2 Product Specifications

2-2 RS21A* / RS24A*

2-2 Pin Assignments

SyncType

Pin No.

15-Pin Signal Cable Connector

Separate Composite Sync-on-green

123456789101112131415

RedGreenBlueGNDGND (DDC Return)GND-RedGND-GreenGND-BlueNo ConnectionGND-Sync./Self TestGNDDDC DataHorizontal sync.Vertical sync.DDC Clock

RedGreenBlueGNDGND (DDC Return)GND-RedGND-GreenGND-BlueNo ConnectionGND-Sync./Self TestGNDDDC DataH/V-Sync.Not UsedDDC Clock

RedGreen + H/V Sync.BlueGNDGND (DDC Return)GND-RedGND-GreenGND-BlueNot UsedGND-Sync./Self TestGNDDDC DataNot UsedNot UsedDDC Clock


6/70


RS21A* /RS24A* 2-3

2-3 Timing Chart

This section of the service manual describes the timing that the computer industry recognizes as standardfor computer-generated video signals.

48.1

1040

120

64

800

56

72.2

666

6

23

600

37

50.000

PositivePositive

Separate

37.9

1056

128

88

800

40

60.3

628

4

23

600

1

40.000

PositivePositive

Separate

35.2

1024

72

128

800

24

56.3

625

2

22

600

1

36.000

/+ /+

Separate

SVGA/56 Hz800 x 600

SVGA/60 Hz800 x 600

SVGA/72 Hz800 x 600

M AC/66 Hz640 x 480

35.0

864

64

96

640

64

66.7

525

3

39

480

3

30.240

NegativeNegative

Separate

fH (kHz)

A sec

B sec

C sec

D sec

E sec

fV (Hz)

O msec

P msec

Q msec

R msec

S msec

ClockFreq.(MHz)

Polarity

H.SyncV.Sync

Remark

VGA3/60 Hz640 x 480

VGA/72 Hz640 x 480

VGA/75 Hz640 x 480

VGA/85 Hz640 x 480

M AC/60 Hz640 x 480

Table 2-1 Timing Chart

31.5

800

96

40

640

8

60.0

525

2

25

480

2

25.175

NegativeNegative

Separate

37.9

832

40

120

640

16

72.8

520

3

20

480

1

31.500

NegativeNegative

Separate

37.5

840

64

120

640

16

75.0

500

3

16

480

1

31.500

NegativeNegative

Separate

43.3

832

56

80

640

56

85.0

509

3

25

480

1

36.000

NegativeNegative

Separate

31.5

800

96

48

640

16

60.0

525

2

33

480

10

25.175

NegativeNegative

Separate

Mode

Timing

Q R S

P

O

Video

Sync Sync

Horizontal Vertical

C D E

P

O

B

A

Video

Sync Sync

Separate Sync

C D

A O

E

B P

Video

Sync Sync

Video

Q R S

A : Line time total B : Horizontal sync width O : Frame time total P : Vertical sync width

C : Back porch D : Active time Q : Back porch R : Active time

E : Front porch S : Front porch


7/70


2-4 RS21A* / RS24A*

68.7

1456

128

144

1152

32

75.1915

3

39

870

3

100.000

Negative

Negative

Separate

67.5

1600

128

256

1152

64

75.0900

3

32

864

1

108.000

Positive

Positive

Separate

60.2

1328

96

176

1024

32

74.9804

3

30

768

3

80.000

Negative

Negative

Separate

M AC/74 Hz

1024 x 768

VESA/75 Hz

1152 x 864M AC/75 Hz1152 x 870

M AC/60 Hz

1024 x 768

48.8

1312

96

128

1024

64

60.0813

6

33

768

6

64.000

Negative

Negative

Separate

46.9

1056

80

160

800

16

75.0625

3

21

600

1

49.500

Positive

Positive

Separate

fH (kHz)

A sec

B sec

C sec

D sec

E sec

fV (Hz)O msec

P msec

Q msec

R msec

S msec

ClockFreq.(MHz)

PolarityH.Sync

V.Sync

Remark

M AC/74 Hz

832 x 624XGA/60 Hz1024 x 768

XGA/70 Hz1024 x 768

XGA/75 Hz1024 x 768

XGA/85 Hz1024 x 768

SVGA/75 Hz

800 x 600

SVGA/85 Hz

800 x 600

Table 2-2 Timing Chart (continued)

53.7

1048

64

152

800

32

85.1631

3

27

600

1

56.250

Positive

Positive

Separate

49.7

1152

64

224

832

32

74.6667

3

39

624

1

57.284

Negative

Negative

Separate

48.4

1344

136

160

1024

24

60.0806

6

29

768

3

65.000

Negative

Negative

Separate

56.5

1328

136

144

1024

24

70.1806

6

29

768

3

75.000

Negative

Negative

Separate

60.0

1312

96

176

1024

16

75.0800

3

28

768

1

78.750

Positive

Positive

Separate

68.7

1376

96

208

1024

48

85.0808

3

36

768

1

94.500

Positive

Positive

Separate

Mode

Timing

Q R S

P

O

Video

Sync Sync

Horizontal Vertical

C D E

P

O

B

A

Video

Sync Sync

Separate Sync

C D

A O

E

B P

Video

Sync Sync

Video

Q R S





8/70


RS21A* /RS24A* 2-5

Q R S

P

O

Video

Sync Sync

Horizontal Vertical

C D E

P

O

B

A

Video

Sync Sync

Separate Sync

C D

A O

E

B P

Video

Sync Sync

Video

Q R S




fH (kHz)

A sec

B sec

C sec

D sec

E sec

fV (Hz)

O msec

P msec

Q msec

R msec

S msec

ClockFrequency(MHz)

PolarityH.SyncV.Sync

Remark

SUN/76 Hz1280 x 1024

SXGA/60 Hz1280 x 1024

SUN/76 Hz1152 x 900

71.7

1472

96

208

1152

16

76.0

943

8

33

900

2

105.561

NegativeNegative

Separate

SUN/66 Hz1152 x 900

61.8

1528

128

208

1152

40

66.0

937

4

31

900

2

94.500

/+ /+

Separate

64.0

1688

112

248

1280

48

60.0

1066

3

38

1024

1

108.000

PositivePositive

Separate

74.4

1680

160

208

1280

32

70.0

1063

3

36

1024

0

125.000

NegativeNegative

Separate

80.0

1688

144

248

1280

16

75.0

1066

3

38

1024

1

135.000

PositivePositive

Separate

81.1

1664

64

288

1280

32

76.1

1066

8

32

1024

2

135.000

NegativeNegative

Separate

SXGA/75 Hz1280 x 1024

78.1

1728

192

192

1280

64

72.0

1085

3

55

1024

3

135.000

NegativeNegative

Separate

HP/72 Hz1280 x 1024

NCD/70 Hz1280 x 1024


Mode

Timing


9/70


2-6 RS21A* / RS24A*

Q R S

P

O

Video

Sync Sync

Horizontal Vertical

C D E

P

O

B

A

Video

Sync Sync

Separate Sync

C D

A O

E

B P

Video

Sync Sync

Video

Q R S





fH (kHz)

A sec

B sec

C sec

D sec

E sec

fV (Hz)O msec

P msec

Q msec

R msec

S msec

ClockFrequency(MHz)

PolarityH.Sync

V.SyncRemark

UXGA/70Hz1600 x 1200

UXGA/65Hz1600 x 1200

81.25

2160

192

304

1600

64

651250

3

46

1200

1

175.500

/+

/+

Separate

UXGA/60Hz1600 x 1200

75

2160

192

304

1600

64

601250

3

46

1200

1

162.000

/+

/+

Separate

87.5

2160

192

304

1600

64

701250

3

46

1200

1

189.000

/+

/+

Separate

80.038

2124

160

308

1600

56

64.4431242

3

38

1200

1

170.000

/+

/+

Separate

74.52

2592

208

336

1920

128

601242

3

38

1200

1

193.156

Negative

Positive

Separate

WUXGA2/60 Hz

1920 x 1200

89.286

2240

256

368

1600

16

66.9311334

10

44

1200

80

200.000

/+

/+

Separate

SUN/66 Hz1600 x 1200

NCD/64Hz1600 x 1200

Mode

Timing


10/70

3-1-1 Removing the Stand

1. Disconnect power cord and signal cable.

2. Remove 2 screws and bushing on the eachside of stand.

3-1-2 M ain Body Disassembly1. Remove the tuner-box.

2. Remove 3 cap-screw and screws on the RearCover.

3. Remove Rear Cover from the Front Cover.

4. Remove 1 screw on the PCB and remove thetuner-guide.

5. Remove 9 screws on the shield and removethe shield.

6. Disconnect Inverter wire, Function PCB wire,Aud io wire, Interface wire, and IR sensor w ire .Remove 6 screws on the main PCB and 4screws on the Inverter PCB.

7. Remove the main PCB Assembly and InverterPCB.

8. Remove 4 screws on the Rear Panel Bracket.

9. Remove the Bracket Assembly from the FrontCover.

10. Remove 4 screws on the panel and thenremove the pan el.

11. Remove 8 screws on th e Bracket Hinge.

12. Remove the Braket Hinge.

RS21A* /RS24A* 3-1

CONFIDENTIAL

3 Disassembly and ReassemblyThis section of the service manual describes the disassembly and reassembly procedures for theRS21A*/ RS24A* monitor .

WARNING: This monitor contains electrostat ically sensitive devices. Use caution when handlingthese components.

3-1 Disassembly

Cautions: 1. Disconnect the m onitor from the pow er source before disassembl y.2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.


11/70

CONFIDENTIAL3 Disassembly and Reassembly

3-2 RS21A* / RS24A*

3-2 Replacement Order of Lamp Assemblies

1. Remove the lamp wire holding tape fromthe metal chassis on the bottom side.

1-1. Taking ou t the lamp w ire fromthe lamp w ire holder.

2. Unscrewing the screw.Unscrew ing force : 0.8 ~ 1Kg - f.cm

3. Pulling out the lamp Assembly withstable Power and direction slowly.Be careful, do not tw ist the lamp reflectorwhen pulling the lamp.


12/70

CONFIDENTIAL3 Disassembly and Reassembly

RS21A* /RS24A* 3-3

3-3 Reassembly

Reassembly procedures are in the reverse order of Disassembly procedures.

* Replacement of lamp unit should be done at the pow er off state and rcommend ed clean benchcondition.

4. Dis-Assembled the lamp Assy from LCDcompletely.


13/70

Memo

3 Disassembly and Reassembly

3-4 RS21A* / RS24A*

CONFIDENTIAL


14/70

CONFIDENTIAL

RS21A* /RS24A* 4-1

4 Alignments and Adjustments

This section of the service manual explains how to use the DDC JIG to adjust the black, red, green, and bluelevels of the FPD when you replace the AD Board, and how to up date the m icroprocessor when youchange the Panel or Lamp(s).

4-1 General Alignment Instuction1. Usually, a color TV-VCR needs only slight touch-up ad justment u pon installation.

Check the basic characteristics such as h eight, horizontal an d v ertical sync.

2. Use the specified test equipment or its equivalent.

3. Correct impedance matching is essential.

4. Avoid overload. Excessive signal from a sweep generator might overload the front-end

of the TV. When inserting signal markers,do not allow the marker generator to distort

test result.

5. Connect the TV only to an DC pow er source with voltage and frequency as specified on

the backcover nameplate.

6. Do not attempt to connect or disconnect any wire wh ile the TV is turned on . Make sure

that the pow er cord is d isconnected before replacing any parts.

7. To protect aganist shock hazard,use an isolation transform.

4-2 Adjustment ProceduresUse the following procedures whenever you replace the AD Board, Panel, or one or both of the Lamps.

4-2-1 (a) Color Auto Adjustment1. After displaying 16-Gray pattern of XGA mode press chann el +, , and m enu buttons.

2. During normal execution of Auto Algorithm the screen image may change. If Auto Algorithm d oesnot excute p roperly, try one more.

3. After normal execution of Auto Algorithm, confirm op timal settings by observing the contrast of several different patterns on the display.

4-2-2 (b) White Balance Adjustment1. After displaying w hite pattern (on the WUXGA mode), press chann el +, and Exit buttons.

2. During normal execution df wh ite balance the screen, image may change.


15/70

Memo

4 Alignments and Adjustments

4-2 RS21A* / RS24A*

CONFIDENTIAL


16/70

CONFIDENTIAL

RS21A* /RS24A* 5-1

5 Troubleshooting

Does proper DC 14 V appear at

DC jack connected to CN800?Check SM PS PCB and Adapter.

Yes

No

Does proper DC 5 V appear atPin 2 of IC815 and IC816? Check IC815 and IC 816

Check IC811 and IC817.

Yes

No

Does proper DC 2.5 V appear atPin 2 of IC804 and IC806?

Check IC804 and IC806.

Yes

No

Does proper DC 3.3 V appear atPin 2 of IC800, IC801 and IC805?

Check IC800, IC801 and IC805.

Yes

No

Does proper DC 5 V appear atPin 2 of IC810? Check IC810.

Yes

No

5-1 No Power


17/70

CONFIDENTIAL5 Troubleshooting

5-2 RS21A* / RS24A*

5-2 No Video (PC Analog Signal)

Power indicator is green

Does the signal appear at Pin 7,15 and 22 of IC203, IC206?

Check R226, R228, R229,C237, C238, C239, R246, R247,

R249, C258, C260, C262.

Yes

No

Does the clock pulse appear atPin 115 and 117 of IC203? Check IC203 and related circuit of IC203.

Yes

No

Does the colck pluseappear at Pin 8 of IC207? Check related circuit of IC207.

Yes

No

Replace LCD Panel.


18/70


RS21A* /RS24A* 5-3

5-3 No Picture (CVBS, S-VHS, Scart Video)

Check Pin 4 (5V_Tuner) of IC816Pin 20 (Scart_Vin) of CN302.

Check CN301 (Tuner),CN302 (Scart connector).

Yes

No

Check Pin 15(RF_CVBS) of CN301. Replace Tuner.

Yes

No

Check IC303 (VPC3230D). Check related circuit of IC303and replace IC303.

Yes

No

IC105 and IC106 and replace it.


19/70


5-4 RS21A* / RS24A*

Does the Low signal atPin 9 and of IC101? Check Pin 4 and 6 of CN102.

Yes

No

Check Pin 1 and 5 of IC101? Replace IC101.

Yes

No

Check Pin 67 ofIC103 (MSP3451)? Replace IC103 (MSP3451).

Yes

No

Check CN301 and tuner andrelated circuit of CN301 and tuner.

5-4 No Sound


20/70

RS21A* /RS24A*

6 Exploded View and Parts List

6-1 RS21A*


21/70

6-2 RS24A*

6 Exploded View & Parts List

6-2


22/70


23/70


24/70


25/70


26/70


27/70

2007-000070 R745 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R746 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R747 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R748 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R749 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R750 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R751 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R752 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R753 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R754 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R755 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R756 R-CHI P 0ohm,5%,1/16W,DA,TP,16082007-000070 R757 R-CHI P 0ohm,5%,1/16W,DA,TP,1608

2007-000071 R135 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R136 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R137 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R138 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R139 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R149 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R150 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R151 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R152 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R153 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R157 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R209 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R226 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R228 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R229 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R230 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R233 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R246 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R247 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R249 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R250 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R399 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R418 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R419 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R501 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R505 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R508 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R509 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R510 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R511 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R512 R-CHI P 22ohm,5%,1/16W,DA,TP,1608

2007-000071 R513 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R514 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R515 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R516 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R517 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R518 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R519 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R520 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R521 R-CHI P 22ohm,5%,1/16W,DA,TP,1608

Page 6


28/70


2007-000071 R608 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R609 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R610 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R611 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R612 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R613 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R614 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R616 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R617 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R620 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R621 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R622 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R623 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R624 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R625 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R626 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R700 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R703 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R705 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 R709 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000071 RA101 R-CHI P 22ohm,5%,1/16W,DA,TP,16082007-000074 R108 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R109 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R110 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R111 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R112 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R113 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R114 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R115 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R116 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R119 R-CHI P 100ohm,5%,1/16W,DA,TP,1608


Page 7


29/70


2007-000074 R316 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R325 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R328 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R330 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R332 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R337 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R338 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R339 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R344 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R348 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R349 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R350 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R359 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R360 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R362 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R365 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R370 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R371 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R379 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R386 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R390 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R522 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R524 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R526 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R527 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R528 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R529 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R530 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R531 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R532 R-CHI P 100ohm,5%,1/16W,DA,TP,16082007-000074 R533 R-CHI P 100ohm,5%,1/16W,DA,TP,1608


Page 8


30/70

2007-000075 R421 R-CHI P 220ohm,5%,1/16W,DA,TP,16082007-000076 R313 R-CHI P 330ohm,5%,1/16W,DA,TP,16082007-000076 R318 R-CHI P 330ohm,5%,1/16W,DA,TP,16082007-000077 R327 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R377 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R812 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R815 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R821 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R822 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R823 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000077 R824 R-CHI P 470ohm,5%,1/16W,DA,TP,16082007-000078 R101 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R104 R-CHI P 1Kohm,5%,1/16W,DA,TP,1608

2007-000078 R117 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R118 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R120 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R123 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R125 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R213 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R214 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R317 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R319 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R340 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R345 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R346 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R347 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R353 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R357 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R363 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R422 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000078 R423 R-CHI P 1Kohm,5%,1/16W,DA,TP,16082007-000080 R388 R-CHI P 2Kohm,5%,1/16W,DA,TP,16082007-000080 R392 R-CHI P 2Kohm,5%,1/16W,DA,TP,16082007-000080 R393 R-CHI P 2Kohm,5%,1/16W,DA,TP,16082007-000082 R105 R-CHI P 3. 3Kohm,5%,1/16W,DA,TP,16082007-000082 R215 R-CHI P 3. 3Kohm,5%,1/16W,DA,TP,16082007-000082 R237 R-CHI P 3. 3Kohm,5%,1/16W,DA,TP,16082007-000084 R131 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R142 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R143 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R144 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R145 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R146 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R147 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,1608

2007-000084 R148 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R154 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R155 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R156 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R158 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R301 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R351 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R352 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,16082007-000084 R366 R-CHI P 4. 7Kohm,5%,1/16W,DA,TP,1608

Page 9


31/70


32/70


33/70


34/70


35/70


36/70


37/70


38/70


39/70


40/70


41/70


42/70


43/70


44/70

2409-001035 C274 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12409-001035 C566 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12409-001035 C640 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12409-001035 C815 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12409-001035 C823 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12409-001035 C824 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12409-001035 C831 C-ORGANI C 10uF,20%,10V,LZ,TP,5. 4x4. 3x4. 3mm,12503-001018 CA200 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA201 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA202 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA203 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA204 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA205 C-NETWORK 15PFX4,10%,50V,-

2503-001018 CA206 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA207 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA208 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA209 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA210 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA211 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA600 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA601 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA602 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA603 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA604 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA605 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA606 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA607 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA608 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA609 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA610 C-NETWORK 15PFX4,10%,50V,-2503-001018 CA611 C-NETWORK 15PFX4,10%,50V,-2703-000271 L308 I NDUCTOR-SMD 4. 7uH,10%,2x1. 25x1. 25mm2703-000271 L309 I NDUCTOR-SMD 4. 7uH,10%,2x1. 25x1. 25mm2703-000271 L310 I NDUCTOR-SMD 4. 7uH,10%,2x1. 25x1. 25mm2703-000271 L311 I NDUCTOR-SMD 4. 7uH,10%,2x1. 25x1. 25mm2703-000398 L101 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L102 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L105 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L106 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L301 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L302 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L303 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L304 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L305 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm

2703-000398 L306 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-000398 L307 I NDUCTOR-SMD 10uH,10%,3. 2x2. 5x2. 2mm2703-001070 L312 I NDUCTOR-SMD 100uH,10%,4. 5x3. 2x3. 2mm2703-001334 BD204 I NDUCTOR-SMD 1. 5uH,10%,2x1. 25x0. 85mm2703-001334 BD205 I NDUCTOR-SMD 1. 5uH,10%,2x1. 25x0. 85mm2703-001334 BD206 I NDUCTOR-SMD 1. 5uH,10%,2x1. 25x0. 85mm2703-001334 BD207 I NDUCTOR-SMD 1. 5uH,10%,2x1. 25x0. 85mm2703-001334 BD400 I NDUCTOR-SMD 1. 5uH,10%,2x1. 25x0. 85mm2703-001778 L103 I NDUCTOR-SMD 3. 3UH,20%,3. 2X2. 5X2. 2MM

Page 23


45/70


46/70


47/70

BN69-00131H CI S PALLET-PACKI NG RS24NS,WOODEN, 1220, 775,120, -, -, - BN69-00240A CI S CUSHI ON-R/L RU24NS,EPS, -, -, -, -, -, -,M50 BN92-00424A - ASSY BOX LW24R15WX/XEU, SEUK, UNI TED KI NGDOM BN68-00135A CI S LABEL BAR CODE -,ALL,MPRI I ,DOM,ART-PAPER 90G, -,WHT,BLACK,-, -, - BN69-00109A CI S BOX LW24R15W, GUJU, CB-DW3, YEL, A-1, -, -, -, L761*W596*H316, - BN92-00605L - ASSY ACCESSORY LW24R15WX/XEC, SESA, SPAI N BN96-00175L CI S ASSY ACCESSORY LW24R15WX/XEC,SESA,SPAI N0203-000214 CI S TAPE-OPP MASKI NG OPP/W50/CLR, T0. 05, W50,L400000, 4301-000121 CI S BATTERY-MN 1. 5V, -,AAA, 10. 5x44. 5m, HOLDER 6801-001009 CI S CARD-WARRANTY EUROPE(12), 8 6801-001014 CI S CARD-REGI STRATI ON XEU,ENG, MOJO100, L150,W392, -, - 6801-001015 CI S CARD-REGI STRATI ON XEG, GERMAN, MOJO100, L150, W392, -, - 6801-001016 CI S CARD-REGI STRATI ON XEF, FRENCH, MOJO100, L150, W392, -, -

6801-001017 CI S CARD-REGI STRATI ON XEC, SPANI SH, MOJO100, L150, W392, -, - 6801-001019 CI S CARD-REGI STRATI ON XEN,DUTCH,MOJO100,L150,W392, -, - 6801-001020 CI S CARD-REGI STRATI ON XEP, PORTUGAL, MOJO100, L150, W392, -, - BH39-00120A CI S CBF SI GNAL -,2000MM,-,-,UL2851#28,-BH39-10339H CI S CBF POWER CORD DET, H05VV-F,250V/10,16A, BLK,25BH69-30348D CI S BAG-PE LDPE, T0. 05, W240*L356, Y, -, CMG73 BN39-00115A CI S CBF SI GNAL NL5MO,15P/15P,2990,1830MM, UL2990,BLACK, D-SUB/MALE, -, -, -BN59-00228A CI S REMOCON -,TM71,RUBENS,37,GR20,BLUE,PAL,-,-,-,-BN68-00169E CI S MANUAL USERS LW24R15W,SAMSUNG,E/F/G/NE/I T/SP/P, EDC, MI MOJO80GBN69-00054B CI S BOX-ACCESSORY PC24PB, CB SW-1, YEL, KSD-21, 45, 300, 230, -, - BN80-00001A CI S WRENCH RU24AS,SCM, M8, 5, WHT,L80 BN92-00619K - ASSY LABEL LW24R15WX/XEC AA68-50502A CI S LABEL-CONFORMATI ON W/P100(G),CTV, I TALY, 170x110, BL BN68-00241B CI S LABEL RATI NG RU24AS, EDC, PE, T0. 05, 65, 79, -, -, PE NATURE, -, - BN68-00255B CI S LABEL DOLBY - STI CKER, PE T0. 05, 79, 19, POLYESTER MATTE COLO

Page 26


48/70

CONFIDENTIAL

8 Block Diagram

RS21A* /RS24A* 8-1

S c a

l e r

J a g u a r

2 0 0

A n a

l o g

t o D i g i t a l

C o n v e r t e r

( A D 9 8 8 4 )

A n a

l o g

R G B

P C

A n a

l o g

A n a

l o g

R G B

P C

A n a

l o g

A n a

l o g

t o D i g i t a l

C o n v e r t e r

( A D 9 8 8 4 )

E n h a n c e r

( F L I 2 2 2 0 )

D o u

b l e

S c a n

R a t o r

( F L I 2 2 0 0 )

M e m o r y

K 4 S 6 4 3 2 3 2 C - T

C 7 0

V i d e o

D e c o d e r

( V P C 3 2 3 0 )

T T X I C ( S A A 5 2 6 4 )

A u d

i o A m p .

( T P A 0 3 2 )

M e m o r y

K 4 S 6 4 3 2 C - T

C 6 0

M e m o r y

K 4 S 6 4 3 2 C - T

C 6 0

M I C O M

( T S C 8 0 2 5 1 G 2 D )

S c a

l e r

J a g u a r

2 0 0

S o u n d

P r o c e s s o r

( M S P 3 4 5 1 )

3 X 1 6

R G B

3 X 1 6

R G B

L V D S

D S 9 0 C 3 8 7

C V B S

_ T T X

,

V_ S

y n c ,

H_ S

y n c

R G B

,

B L A N K 2 4

" L C D

Y U V

S c a r t

i n p u

t

R C A - J a c

k

V C R i n p u

t

T u n e r

C V B S

P C A u d

i o V i d e o

A u d

i o

R E A u d

i o

S P K L

S P K R


49/70

CONFIDENTIALMemo

8 Block Diagrams

8-2 RS21A* / RS24A*


50/70

RS21A* /RS24A*

VOLO+VOL-CH+CH-EXITMENUBUZZERLEDAUTOPIPSOURCE

S C R 1

S C L 1

S C R 1

S C L 1 A

U D I O O U T ( R )

A U D I O I N P U T ( R )

A U D I O I N P U T ( L )

A U D I O O U T P U T ( L )

G N D

G N D

B I D N C

G N D

G N C

G N D

G N D

R R G B

_ B L

CN700

CN101

CN302

V I D E O O U T

V I D E O I N P U T

G N D

G N D

G N D

CN800

9 Wi ring Diagram


51/70

9 Schematic Diagrams

9-2

Memo


52/70


10-1 RUBENS_PAL_Top Parts Schematic Diagram

RS21A* /RS24A*


53/70


10-2

+5V_M

+5V_M

+5V_M

+5V_M

+5V_M

+3.3V_A

+3.3V_A

+3.3V_A

+5V_M

+5V_M

+5V_M

+5V_M

+5V_M

+5V_M

AUDIO

1

10-2 RUBENS_PAL_M icom Parts Schematic Diagram


54/70


RS21A* /RS24A*

1


55/70


10-4

10-3 RUBENS_PAL_ADC Parts Schematic Diagram+3.3V_P1

+5V_ADC

+5V_SYNC

+3.3V_ADC1

+5V_IN +5V_IN +5V_IN

+3.3V_ADC2

+3.3V_AD2

+3.3V_P2+3.3V_P2

+3.3V

+3.3V_ADC1

+3.3V_AD2

+3.3V_P1

+3.3V_AD2+3.3V_ADC2

+5V_SYNC

+5V_ADC

+3.3V_P2

+5V_ADC

+3.3V_ADC1

+5V_ADC

+3.3V_B

+3.3V_ADC2

+3.3V_SYNC

+3.3V_SYNC

+3.3V_SYNC

+3.3V_SYNC

HSYNC_SS

HSYNC_SS

PC_HS1

HSYNC_SS

PC_HS1

HSYNC_PLL

PC_VS1

VSYNC_SS

BLUE_IN

GREEN_IN

RED_IN

RED_IN

GREEN_IN

BLUE_IN

VSYNC_SS

PC_HS1PC_VS1

VSYNC_SS

PC_HS

VSYNCB

VSYNC_SSHSYNC_PLL

OECH2

OECH2AX

MC_SCLKMC_DATA

2 3


56/70

RS21A* /RS24A*


2 3 4 5


57/70


10-6

10-4 RUBENS_PAL_Video Parts Schematic Diagram

+5V_DEC

+3.3V_TTX

+5V_DEC

+5V_TUNER

+5V_M

+5V_DEC1

+5V_DEC1

+5V_DEC

+5V_TUNER

+

+3.3V_LVDS+5V_M

+3.3V_TTX

+3.3V_TTX

+5V_DEC1

TTX_SW

CIN

YIN

MC_SCLK

MC_DATA

VID_ONB

6

7


58/70

RS21A* /RS24A*


6 7 8


59/70


10-5 RUBENS_PAL_Audio Parts Schematic Diagram

+14V_MAIN

MSP_INTCIN

YIN

VCR

9

10

11

10-8


60/70

RS21A* /RS24A*


9 10 11


61/70


62/70

RS21A* /RS24A*


12


63/70


10-12

10-7 RUBENS_PAL_V_Backend Parts Schematic Diagram

+A2.5V_FLI

13

14


64/70

RS21A* /RS24A*


13 14 15


65/70


66/70

RS21A* /RS24A*


16


67/70


10-16

10-9 RUBENS_PAL_LVDS Parts Schematic Diagram

+14V_INV+3.3V_LVDS

+3.3V_LVDS

+5V_P

+3.3V_LVDS

+5V_P

MC_DATA

BL_EN

MC_SCLK


68/70

RS21A* /RS24A*


10-10 RUBENS_PAL_POWER Parts Schematic Diagram

+A2

+5V_P

+5V_P +5V_TUNER +5V_ADC

+3.3V_SY

+5V_IN +2.5V_PC

+5V_SYNC

17 18

20


69/70


10-18

1817 19 20


70/70

Documents

Monitor LCD Samsung Model-RS24A