Monthly Notifications Register - 31.45.242.21831.45.242.218/pdf/MNR/200909CENmnr.pdf · I40 Industrial piping networks / 267 ... M05 Welding 44 121 ... Smoke and heat control systems

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CMC from 2009-09-01 to 2009-09-30

Register issued on : 2009-10-02

2009-08

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180

A11 Security Services / CEN/BT/TF 167

A12 Consultancy Services / 395, 381

A99 Undetermined / CEN/WS 002; CEN/WS 004

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 284; 288; 297; 340; 349

B03 Concrete 71 104; CEN/WS 003

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89

CEN/BT WG 173

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341

B15 Sanitary appliances / 163

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 307; 327; 338; CEN/WS 008

C02 Paints and related products 35 139; 298

C03 Chemistry 47 317

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 /

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 /

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C99 Undetermined / /

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN WS 010

F08 Surfaces 57 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS EBES

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007

F16 Graphical symbols 145 /

F17 Administrative documents 154 /

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC CWG/QS

F21 Value analysis and project / 279 network

F22 Logistics / /

F23 Energy 203 /

F99 Undetermined / /

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 /

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 /

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / /

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117

H99 Undetermined / 299

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits 3 /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 /

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; (including safety) 271, 337

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 /

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / /

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies / 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1; ECISS/TC 2

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335

N03 Petroleum products 28 19; 336; 343

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238

N22 Feather and related materials / 222

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001

S10 Surgical implants 150 285; CEN/CLC JWG/AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and 200 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3

S22 Energy saving / CEN/WS 005

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 /

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 /

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029

S99 Undetermined / 205; CEN/BT/TF 127

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS

T03 Road vehicles 22 301; 326

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / /

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CENELEC - ETSI

Z03 Common O.S.I. activities / CEN/CENELEC - EWOS

Z99 Undetermined / CEN/CENELEC CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/TC 353




Sector A : SERVICES


Page 3Subsector A99: UNDETERMINED.

Subsector : A99 Registration Date : 2009-09-02Organization : NENCountry : NetherlandsProject ID : 50001510/0001 Project EstablishedICS : 35.240.99National Ref : NTA 2035:2009 nlTitle : E-portfolio NL - The exchange of e-portfolios using an application profile based on the

IMS ePortfolioScope : This document makes the exchange possible of e-portfolio's between various organizations

and/or e-portfolio information systems.

Relatedness :National : New

** End of Subsector **

** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 5Subsector B01: FIRE PROTECTION.

Subsector : B01 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 70001411/0001 Project EstablishedICS : 13.220.20, 23.120National Ref : U70001411Title : Smoke and heat control systems - Part 1: Design, installation and maintenance for

natural smoke and heat exhaust ventilatorsScope : This standard gives the criteria for calculation and design, installation, commissioning, use,

routing checking and maintenance for Natural Smoke and Heat Exhaust Ventilation Systems (NSHEVS) in case of fire. This standard applies to: single-floor construction, last floor of a multi-floor construction, intermediate floor of a multi-floor construction connectable with the roof. This standard applies to NSHEVS made with roof mounted Natural Smoke and Heat Exhaust Ventilators (NSHEV) and gives indications and criteria to take into account for the design and installation of NSHEVS made with wall mounted NSHEV.

Relatedness :National : REV/AMD UNI 9494:2007


Subsector B02: STRUCTURES.

Subsector : B02 Registration Date : 2009-09-18Organization : ASICountry : AustriaProject ID : 00022554/0001 Project EstablishedICS :National Ref : ÖNORM B 1990-2Title : Eurocode - Basis of structural design - Part 2: Bridge construction - National

specifications concerning ÖNORM EN 1990:2002/A1:2006Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1990/A1 and shall be

applied jointly with ÖNORM EN 1990 and ÖNORM EN 1990/A1 for "Application for bridges" in Austria.


Subsector : B02 Registration Date : 2009-09-18Organization : ASICountry : AustriaProject ID : 00022555/0001 Project EstablishedICS :National Ref : ÖNORM B 1991-2Title : Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges - National

specifications concerning ÖNORM EN 1991-2 and national supplementsScope : This Austrian Standard specifies national parameters to ÖNORM EN 1991-2 and shall be

applied jointly with ÖNORM EN 1991-2 in Austria. EN 1991-2 defines imposed loads (models and representative values) associated with road traffic, pedestrian actions and rail traffic which include, when relevant, dynamic effects and centrifugal, braking and acceleration actions and actions for accidental design situations. Imposed loads defined in EN 1991-2 are intended to be used for the design of new bridges, including piers, abutments, upstand walls, wing walls and flank walls etc., and their foundations. The load

Page 6

Scope : models and values given in EN 1991-2 should be used for the design of retaining walls adjacent to roads and railway lines. NOTE For some models only, applicability conditions are defined in EN 1991-2. For the design of buried structures, retaining walls and tunnels, provisions other than those in EN 1990 to EN 1999 may be necessary. Possible complementary conditions may be defined in the National Annex or for the individual project. EN 1991-2 is intended to be used in conjunction with EN 1990 (especially A2) and EN 1991 to EN 1999. Section 1 gives definitions and symbols. Section 2 defines loading principles for road bridges, footbridges (or cycle-track bridges) and railway bridges. Section 3 is concerned with design situations and gives guidance on simultaneity of traffic load models and on combinations with non-traffic actions.


Subsector : B02 Registration Date : 2009-09-18Organization : ASICountry : AustriaProject ID : 00022574/0001 Project EstablishedICS :National Ref : ÖNORM B 1992-1-1Title : Eurocode 2 - Design of concrete structures - Part 1-1: General rules and rules for

buildings - National specifications concerning ÖNORM EN 1992-1-1, national commnts and national supplements

Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1992-1-1 and shall be applied jointly with ÖNORM EN 1992-1-1 in Austria. Eurocode 2 applies to the design of buildings and civil engineering works in plain, reinforced and prestressed concrete. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verifi-cation that are given in EN 1990: Basis of structural design. Eurocode 2 is only concerned with the requirements for resistance, serviceability, durability and fire resistance of concrete structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.


Subsector : B02 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610413/0001 Draft for public enquiryICS : 91.120.25National Ref : prNBN EN 1998-4 ANBTitle : Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and

pipelines - National annex

Relatedness :National : REV/AMD EN 1998-4European : Not Equivalent to EN 1998-4:2005

Subsector : B02 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610414/0001 Draft for public enquiryICS : 91.080.01National Ref : prNBN EN 1998-5 ANB

Page 7

Title : Eurocode 8 - Design of structures for earthquake resistance - Part 5: Foundations, retaining structures and geotechnical aspects - National annex


Subsector : B02 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610415/0001 Draft for public enquiryICS : 91.120.25National Ref : prNBN EN 1998-3 ANBTitle : Eurocode 8 - Design of structures for earthquake resistance - Part 3: Assessment and

retrofitting of buildings - National annex


Subsector : B02 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610416/0001 Draft for public enquiryICS : 91.120.25, 93.040National Ref : prNBN EN 1998-2 ANBTitle : Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges - National

annex


Subsector : B02 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610417/0001 Draft for public enquiryICS : 91.010.30National Ref : prNBN EN 1998-1 ANBTitle : Eurocode 8 - Design of structures for earthquake resistance - Part 1: General rules,

seismic actions and rules for buildings - National annex


Subsector : B02 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610418/0001 Draft for public enquiryICS : 91.120.25National Ref : prNBN EN 1998-6 ANBTitle : Eurocode 8 - Design of structures for earthquake resistance - Part 6: Towers, masts and

chimneys - National annex

Relatedness :National : REV/AMD EN 1998-6

Page 8

European : Not Equivalent to EN 1998-6:2005


Subsector B03: CONCRETE.

Subsector : B03 Registration Date : 2009-09-10Organization : SUTNCountry : SlovakiaProject ID : 72903809/0001 Project EstablishedICS : 91.100.60National Ref :Title : Thermal insulation products for building application – Part 1: Types and categories of

applicationScope : The standard determines types and categories of application of EPS products.

Implementation of the Czech standard CSN 72 7221-1:2008


Subsector : B03 Registration Date : 2009-09-10Organization : SUTNCountry : SlovakiaProject ID : 72903909/0001 Project EstablishedICS : 91.100.60National Ref :Title : Thermal insulation products for building application – Part 2: Factory made products of

expanded polystyrene (EPS)Scope : This standard determines required values of properties of factory made products of

expanded polystyrene (EPS) by classes, levels or threshold values. It is applied for design and execution of buildings, standard types of constructions and categories of application. Implementation of the Czech standard CSN 72 7221-2:2008


Subsector : B03 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090028/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269/2Title : Existing structures – Concrete structures



Subsector B05: FIRE TESTS.

Subsector : B05 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 39001130/0001 Project Established

Page 9

ICS : 13.220.50National Ref : U39001130Title : Combustible products which can be hit by flame on both surfaces - Reaction to fire by

applying a small flameScope : This standard describes a method for the determination of post-combustion time, of the

damaged area, of post-incandescence time and of dripping of a specimen subjected to the action of a small flame applied to its lower edge.


Subsector : B05 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 39001140/0001 Project EstablishedICS : 13.220.50National Ref : U39001140Title : Combustible products which can be hit by flame on one surface - Reaction to fire by

applying a small flameScope : This standard describes a method for the determination of post-combustion time, of post-

incandescence time, of the damaged area and of the dripping of a specimen subjected to the action of a small flame applied to one of its faces only.


Subsector : B05 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 39001150/0001 Project EstablishedICS : 13.220.50National Ref : U39001150Title : Reaction to fire of products which can be hit by flame with radiant heatingScope : This standard describes a method for the determination of the flame spread speed along a

surface, of post-incandescence of the damaged area and of the dripping on a specimen subjected to the action of an ignition flame in the presence of radiant heat.


Subsector : B05 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 39001160/0001 Project EstablishedICS : 13.220.50National Ref : U39001160Title : Reaction to fire of upholstered products by applying a small flame - Test method and

classificationScope : This standard describes a method for the assessment of combustion of product in the

presence or not of a flame and/or incandescence. The method also provides an indication about the fire reaction of a piece of product during the initial phase of a fire, under the action of an ignition source of a limited extent.

Page 10


Subsector : B05 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 39001170/0001 Project EstablishedICS : 13.220.50National Ref : U39001170Title : Reaction to fire - Preparation of materials for verification of requirementsScope : This standard describes three methods for the preparation of specimens, for the

assessment of their fire reaction characteristics. This standard applies to all materials whose fire reaction is to be determined according to standards UNI 8456, UNI 8457, UNI 9174, UNI 9175 and UNI 9796.



Subsector B08: DOORS AND WINDOWS.

Subsector : B08 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00902879/0001 Project EstablishedICS :National Ref : BS 7722Title : Surface covered PVC-U profiles for windows and doors. Specification



Subsector B09: THERMAL MATTERS.

Subsector : B09 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 02019984/0001 Project EstablishedICS : 91.120.10National Ref : E02019984Title : Energy performance of buildings - Part 4: Renewable energy and other generation

systems for space heating and domestic hot water productionScope : This technical specification specifies data and procedures for the calculation of the energy

performance of buildings relating to space heating and cooling and domestic hot water production. This technical specification is a national guideline for immediate and univocal application of technical specifications elaborated by CEN to support the Directive 2002/91/EC “Energy Performance of Buildings”. This technical specification is divided into 4 parts: Part 1 - Energy need for space heating and cooling, Part 2 - Primary energy and system efficiencies for space heating and domestic hot water production, Part 3 - Primary energy and system efficiencies for space cooling, Part 4 - Renewable energy and other generation systems for space heating and domestic hot water production. This part 4 deals

Page 11

Scope : with the following generation systems: (1) solar systems, (2) biomass combustion systems, (3) heat pumps, (4) photovoltaic systems, (5) cogeneration systems, (6) district heating systems.


Subsector : B09 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165730/0001 Project EstablishedICS :National Ref : PR NF DTU 68.3 P1-2Title : Building works - Mechanical ventilation installations - Part 1-2 : General criteria for

selection of materials

Relatedness :National : REV/AMD XP P50-410:199507 (P50-410), NF P50-411-1:199305 (P50-411-1)

Subsector : B09 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165731/0001 Project EstablishedICS :National Ref : PR NF DTU 68.3 P2Title : Building work - Mechanical ventilation installations - Part 2 : Contract bill of special

administrative model clauses

Relatedness :National : REV/AMD NF P50-411-2:199305 (P50-411-2)

Subsector : B09 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165732/0001 Project EstablishedICS :National Ref : PR NF DTU 68.3 P1-1Title : Building works - Mechanical ventilation installations - Part 1-1 : Contract bill of technical

model clauses

Relatedness :National : REV/AMD XP P50-410:199507 (P50-410), NF P50-411-1:199305 (P50-411-1)


Subsector B10: TIMBER STRUCTURES.

Subsector : B10 (Secondary Subsector)

Registration Date : 2009-09-01

Organization : BSICountry : United KingdomProject ID : 00903048/0001 Project EstablishedICS :

Page 12

National Ref : BS 8201Title : Code of practice for flooring of timber, timber products and wood based panel products


Subsector : B10 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 40005581/0001 Project EstablishedICS : 79.040National Ref : U40005581Title : Structural timber - Visual strength grading for structural timbers - Part 1: Terminology

and measurements of featuresScope : The standard specifies terminology and methods for the measurements of features relevant

to the visual strength grading of timber for load bearing structures.

Relatedness :National : REV/AMD UNI 11035-1:2003

Subsector : B10 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 40005582/0001 Project EstablishedICS : 79.040National Ref : U40005582Title : Structural timber - Visual strength grading for structural timbers - Part 2: Visual strength

grading rules and characteristics values for structural timber populationScope : The standard specifies the rules used to make the visual strength grading according to

strength of structural timber.


Subsector : B10 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090031/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269/5Title : Existing structures – Timber structures



Subsector B11: METAL STRUCTURES.

Subsector : B11 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090029/0001 Draft for public enquiry

Page 13

ICS : 91.120.01National Ref : SIA 269/3Title : Existing structures – Steel structures



Subsector B12: MASONRY.

Subsector : B12 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090032/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269/6Title : Existing structures – Natural stone masonry



Subsector B14: GEOTECHNICS.

Subsector : B14 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903055/0001 Project EstablishedICS :National Ref : BS XXXXX-2Title : Geotechnical investigation and testing. Sampling and groundwater measurements. Part

2. Qualification criteria for enterprises and personnel


Subsector : B14 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090033/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269/7Title : Existing structures – Geotechnics



Subsector B18: SCAFFOLDING.

Subsector : B18 Registration Date : 2009-09-28Organization : AFNOR

Page 14

Country : FranceProject ID : FA165722/0001 Project EstablishedICS :National Ref : PR NF P93-354Title : Building site equipment - Individual mobil plateform- Product specification and test

methods



Subsector B20: DRAINAGE EQUIPMENT.

Subsector : B20 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903049/0001 Project EstablishedICS :National Ref : BS 5911-3Title : Concrete pipes and ancillary concrete products. Part 3. Specification for unreinforced

and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)


Subsector : B20 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903056/0001 Project EstablishedICS :National Ref : BS 5911-1:2002+A2Title : Concrete pipes and ancillary concrete products. Part 1. Specification for unreinforced

and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002). Amendment


Subsector : B20 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903058/0001 Project EstablishedICS :National Ref : BS 5911-4:2002+A2Title : Concrete pipes and ancillary concrete products. Part 4. Specification for unreinforced

and reinforced concrete inspection chambers (complementary to BS EN 1917:2002). Amendment


Subsector : B20 Registration Date : 2009-09-01

Page 15

Organization : BSICountry : United KingdomProject ID : 00903059/0001 Project EstablishedICS :National Ref : BS 5911-5:2004+A1Title : Concrete pipes and ancillary concrete products. Part 5. Specification for prestressed

non-pressure pipes and fittings with flexible joints. Amendment


Subsector : B20 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903060/0001 Project EstablishedICS :National Ref : BS 5911-6:2004+A1Title : Concrete pipes and ancillary concrete products. Part 6. Specification for road gullies and

gully cover slabs. Amendment



Subsector B26: ROAD BUILDING AND MAINTENANCE.

Subsector : B26 Registration Date : 2009-09-04Organization : SUTNCountry : SlovakiaProject ID : 01906109/0001 Project EstablishedICS : 01.075, 93.080.30National Ref : STN 01 8020Title : Traffic signing and road markingScope : Harmonization of the standard with the new legislation – representation of traffic signs.

Harmonization of original standard and modifications in its content to one document.

Relatedness :National : REV/AMD STN 01 8020

Subsector : B26 Registration Date : 2009-09-16Organization : SNV Draft Issue Date : 2009-09-15Country : Switzerland Latest Date for Comments : 2009-10-20Project ID : CH090024/0001 Draft for public enquiryICS : 03.220.20National Ref : SN 507701Title : General conditions for road and traffic


Subsector : B26 Registration Date : 2009-09-07Organization : AENOR

Page 16

Country : SpainProject ID : P0029073/0001 Project EstablishedICS :National Ref : PNE 135334Title : Vertical signs. Retroreflective sheetings with glass beads. Characteristics and test

methodsScope : This standard specifies the characteristics and test methods for retroreflective sheetings

with glass beads used in vertical signs.

Relatedness :National : REV/AMD UNE 135334:2003


Subsector B27: WATERPROOFING MATERIALS.

Subsector : B27 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00902874/0001 Project EstablishedICS :National Ref : BS 5534:2003+A1Title : Code of practice for slating and tiling (including shingles). Amendment


Subsector : B27 Registration Date : 2009-09-07Organization : AENORCountry : SpainProject ID : P0034056/0001 Project EstablishedICS :National Ref : PNE 104427Title : Synthetic materials. Application. Lining systems for water reservoirs used for irrigation

purposes or water storage with waterproofing geomembranes made out of polyethylene (PE)

Scope : It defines the requirements for the installation and maintenance of the waterproofing systems for irrigation purposes of storage of water with water proofing membranes of polyethylene



Subsector B30: FLOOR AND SURFACING .

Subsector : B30 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903048/0001 Project EstablishedICS :National Ref : BS 8201Title : Code of practice for flooring of timber, timber products and wood based panel products

Page 17



Subsector B32: PRECAST CONCRETE PRODUCTS.

Subsector : B32 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610378/0001 Draft for public enquiryICS : 91.060.30, 91.100.30National Ref : prNBN B 21-605Title : Precast concrete products - Hollow core slabs - National supplement to NBN EN

1168+A2:2009

Relatedness :National : REV/AMD EN 1168European : Not Equivalent to EN 1168:2009

Subsector : B32 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610411/0001 Draft for public enquiryICS : 91.100.30National Ref : prNBN B 21-606Title : Precast concrete products - Floor plates for floor systems - National supplement to NBN

EN 13747+A1:2009

Relatedness :National : REV/AMD EN 13747European : Not Equivalent to EN 13747+A1:2009

Subsector : B32 Registration Date : 2009-09-17Organization : NBN Draft Issue Date : 2009-09-20Country : Belgium Latest Date for Comments : 2010-02-20Project ID : BE610412/0001 Draft for public enquiryICS : 91.100.30National Ref : prNBN B 21-612Title : Precast concrete products - Wall elements - National supplement to NBN EN

14992:2007

Relatedness :National : REV/AMD EN 14992European : Not Equivalent to EN 14992:2007


Subsector B99: UNDETERMINED.

Subsector : B99 Registration Date : 2009-09-28Organization : SIS Draft Issue Date : 2009-09-28Country : Sweden Latest Date for Comments : 2009-11-28Project ID : 00023301/0001 Draft for public enquiryICS :National Ref : 23301

Page 18

Title : Documents in the building and management process - TerminologyScope : The national standard SS 023301 needs to be revised in order to add new terms as well as

to remove obsolete terms and expressions


Subsector : B99 Registration Date : 2009-09-28Organization : SIS Draft Issue Date : 2009-09-28Country : Sweden Latest Date for Comments : 2009-11-28Project ID : 00023302/0001 Draft for public enquiryICS :National Ref : 23302Title : Construction drawings - Designations and abbreviationsScope : The national standard SS 023302 needs to be revised in order to add new designations and

abbreviations and remove those not in use anymore


Subsector : B99 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 00515004/0001 Project EstablishedICS :National Ref : 00515004Title : Fire behaviour of building materials and building components - Part 23: Roofs -

Application rules for test results for roofs tested to DIN V ENV 1187, test method 1, and/or DIN 4102-7




Organization : BSICountry : United KingdomProject ID : 00902953/0001 Project EstablishedICS :National Ref : BS 7291-1Title : Thermoplastics pipes and associated fittings for hot and cold water for domestic

purposes and heating installations in buildings. Part 1. General Requirements




Organization : BSICountry : United KingdomProject ID : 00902954/0001 Project EstablishedICS :

Page 19

National Ref : BS 7291-2Title : Thermoplastics pipes and associated fittings for hot and cold water for domestic

purposes and heating installations in buildings. Part 2. Specification for polybutylene (PB) pipes and associated fittings




Organization : BSICountry : United KingdomProject ID : 00902955/0001 Project EstablishedICS :National Ref : BS 7291-3Title : Thermoplastics pipes and associated fittings for hot and cold water for domestic

purposes and heating installations in buildings. Part 3. Specification for cross-linked polyethylene (PE-X) pipes and associated fittings


Subsector : B99 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903057/0001 Project EstablishedICS :National Ref : BS 8000-16:1997+A1:2009Title : Workmanship on building sites. Part 16. Code of practice for sealing joints in buildings

using sealants. Amendment


Subsector : B99 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090026/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269Title : Existing structures - Bases


Subsector : B99 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090027/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269/1Title : Existing structures – Actions

Page 20


Subsector : B99 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-18Country : Switzerland Latest Date for Comments : 2009-12-18Project ID : CH090030/0001 Draft for public enquiryICS : 91.120.01National Ref : SIA 269/4Title : Existing structures - Composite steel and concrete structures



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 22Subsector C01: Food products

Subsector : C01 Registration Date : 2009-09-18Organization : ASICountry : AustriaProject ID : 00022514/0001 Project EstablishedICS :National Ref : ONR 142000Title : Halal food - Requirements for the food chainScope : In Islam, "halal" (pure, permitted) refers to all objects and actions allowed or permissible

under Islamic law. Its opposite is "haram" (forbidden). There is a grey area between halal and haram that is referred to as "makruh". Everything that is not explicitly forbidden, but tends towards haram is makruh ("offensive" or "disliked"). Muslims should also avoid this grey area as a precaution. This classification pervades the entire sphere of life of a Muslim. In the field of nutrition, however, a distinction is essentially made between halal and haram. This ON Rule defines requirements for the food chain in order to ensure that foodstuffs are considered to be allowed or permitted ("halal") under Islamic law.


Subsector : C01 Registration Date : 2009-09-14Organization : UNMZ Draft Issue Date : 2009-08-31Country : Czech Republic Latest Date for Comments : 2009-11-01Project ID : 46000709/0001 Published StandardICS :National Ref :Title : Pulses – Common regulationsScope : This standard sets common regulations for pulses.

Relatedness :National : REV/AMD CSN 46 1300-1 (1998)

Subsector : C01 Registration Date : 2009-09-14Organization : UNMZ Draft Issue Date : 2009-08-31Country : Czech Republic Latest Date for Comments : 2009-11-01Project ID : 46000809/0001 Published StandardICS :National Ref :Title : Pulses – Beans edibleScope : This standard sets conditions for supplies of beans edible.

Relatedness :National : REV/AMD CSN 46 1300-4 (1994)

Subsector : C01 Registration Date : 2009-09-14Organization : UNMZ Draft Issue Date : 2009-08-31Country : Czech Republic Latest Date for Comments : 2009-11-01Project ID : 56002209/0001 Published StandardICS :National Ref :Title : Foodstuffs - Determination of admixtures content in pulses for direct consumption

Page 23

Scope : This standard sets method for determination of admixtures content in pulses for direct consumption.

Relatedness :National : REV/AMD

Subsector : C01 Registration Date : 2009-09-07Organization : AENORCountry : SpainProject ID : P0034070/0001 Project EstablishedICS :National Ref : PNE 155403:2008/2MTitle : Fresh vegetables. Controlled production. Pepper produced incorporating biological pest

control.Scope : It describes the general aspects of a controlled production system in which biological

control is a requirement. It is applicable to vegetables and fruits both under protection and in the open air

Relatedness :National : REV/AMD UNE 155403:2008


Subsector C03: CHEMISTRY.

Subsector : C03 Registration Date : 2009-09-01Organization : UNMZ Draft Issue Date : 2009-05-31Country : Czech Republic Latest Date for Comments : 2009-08-31Project ID : 65003909/0001 Draft for public enquiryICS :National Ref :Title : Automotive fuels – Compressed Natural Gas (CNG) – Requirements and test methodScope : This Standard specifies requirements and test methods for marketed and delivered CNG

automotive fuel.

Relatedness :National : REV/AMD CSN 65 6517

Subsector : C03 Registration Date : 2009-09-01Organization : UNMZ Draft Issue Date : 2009-08-31Country : Czech Republic Latest Date for Comments : 2009-09-30Project ID : 65004609/0001 Draft for public enquiryICS :National Ref :Title : Automotive fuels – Diesel fuel blends containing Fatty acid methyl esters (FAME) –

Requirements and test methodsScope : This Standard specifies requirements and test methods for marketed and delivered

automotive diesel fuel blends containing min. 30 % (V/V) FAME.

Relatedness :National : REV/AMD CSN 65 6508 (2003)

Page 24

Subsector : C03 Registration Date : 2009-09-01Organization : UNMZ Draft Issue Date : 2009-08-31Country : Czech Republic Latest Date for Comments : 2009-09-30Project ID : 65004709/0001 Draft for public enquiryICS :National Ref :Title : Automotive fuels – Ethanol E95 for compression ignition engines (diesel engines) –

Requirements and test methodsScope : This Standard specifies requirements and test methods for marketed and delivered Ethanol

(E95) automotive fuel.

Relatedness :National : REV/AMD CSN 65 6513 (2007)


** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 26Subsector F05: MEASURING INSTRUMENTS.

Subsector : F05 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 15201943/0001 Project EstablishedICS :National Ref : 15201943Title : Inclination measuring instruments (levels)


Subsector : F05 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 15201944/0001 Project EstablishedICS :National Ref : 15201944Title : Inclination measuring systems; cylindrical spirit level vials; dimensions and requirements


Subsector : F05 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 15201945/0001 Project EstablishedICS :National Ref : 15201945Title : Inclination measuring systems; electronic inclination measuring systems; types and

requirements



Subsector F08: SURFACES.

Subsector : F08 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA163017/0001 Project EstablishedICS :National Ref : PR XP E01-011Title : Mechatronics - Design



Subsector F09: BANKING.

Page 27

Subsector : F09 Registration Date : 2009-09-18Organization : ASICountry : AustriaProject ID : 00022534/0001 Project EstablishedICS :National Ref : ONR 142001Title : Islamic Banking - Requirements for financial products and financial servicesScope : In Islam there are different principles of law leading to a distinction between conventional

banking systems and Islamic banking system, e.g. the prohibition of interests, speculative trade in goods and the prevention of risks and uncertainties. This ONR defines requirements of financial products and financial services to be used in Islamic banking to ensure, that the design of such products and services complies with Islamic principles.



Subsector F12: INFORMATION PROCESSING SYSTEMS.

Subsector : F12 Registration Date : 2009-09-28Organization : SIS Draft Issue Date : 2009-09-07Country : Sweden Latest Date for Comments : 2009-11-07Project ID : 00637008/0001 Draft for public enquiryICS :National Ref : 637008Title : Geographic information - Water systems - Application schemaScope : We are revising the abovementioned standard from 2006 and expanding the scope to the

following: The geographic representation of water systems, defining concepts related to water systems. The standard comprises surface water, coastal water, soil water, ground water, snow, ice, glaciers, wetlands, springs and coastlines. The standard contains a UML application schema with rules to manage the hierarchical structure of water systems with different levels of detail, including flow direction, update management, versioning, metadata and reference systems. The standard will be of great help for reporting according to the EC INSPIRE and water directives



Subsector F20: QUALITY ASSURANCE.

Subsector : F20 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 27000800/0001 Project EstablishedICS : 03.120.10National Ref : U27000800Title : Quality management systems - Guidelines for the application of ISO 9001:2008 in local

governmentScope : The objective of this document is to provide local governments with guidelines for the

voluntary application of ISO 9001:2008 on an integral basis. These guidelines do not, however, add, change or modify the requirements of ISO 9001:2008. For a local government to be considered reliable, it should guarantee minimum conditions of

Page 28

Scope : reliability for the processes that are necessary to provide all the services needed by its citizens in a consistent and reliable manner. All the local government's processes, including management, core, operational and support processes, should constitute a single, integral, quality management system. The integral character of this system is important because, otherwise, although a local government could be reliable in some areas of activity, it may be unreliable in others. For a government to be considered reliable, it should guarantee minimum conditions of reliability for all key processes and services.

Relatedness :National : REV/AMD UNI/TR 11217:2007

Subsector : F20 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 27000810/0001 Project EstablishedICS : 01.040.01, 03.120.10National Ref : U27000810Title : Quality management - Meaning of main terms used in ISO 9000 family of standards Scope : This technical report is an informative national document, it furnishes additional

information on the meaning of terms used in quality management standards (ISO 9000 series) and the correlation between English and Italian terms. It doesn't furnish supplementary definitions than those given in ISO 9000, but specifies the "meaning" of terms used in standards and not yet defined.

Relatedness :National : REV/AMD UNI/TR 11220:2007


** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 30Subsector H30: EQUIPMENT FOR CHILDREN.

Subsector : H30 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903051/0001 Project EstablishedICS :National Ref : BS 1877-10Title : Domestic bedding. Part 10. Specification for mattresses and bumpers for children's cots,

perambulators and similar domestic articles



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 32Subsector I02: FASTENERS.

Subsector : I02 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 00903034/0001 Project EstablishedICS :National Ref : BS 4A 102:2002 Corrigendum 1Title : Specification for steel bolts (Unified hexagons and Unified threads) for aircraft.

Corrigendum



Subsector I09: SMALL TOOLS.

Subsector : I09 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 12800221/0001 Project EstablishedICS :National Ref : 12800221Title : Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices



Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)

Subsector : I17 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 50019200/0001 Project EstablishedICS : 13.100National Ref : U50019200Title : Effectiveness maintenance of safety of plants and machinery - Guideline for monitoringScope : The guideline provides indications to the machines and installations' users in order to

project an effective monitoring system of the safety's functions.



Subsector I20: REFRIGERATION.

Subsector : I20 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 04400164/0001 Project EstablishedICS :

Page 33

National Ref : 04400164Title : Testing of cooling equipment for insulated means of transportation - Part 5: Controlled

gas refrigerating systems with indirect evaporation



Subsector I35: LEISURE AND RECREATIONAL MACHINES.

Subsector : I35 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 11200771/0001 Project EstablishedICS :National Ref : 11200771Title : Fitness clubs



Subsector I40: INDUSTRIAL PIPING NETWORKS.

Subsector : I40 Registration Date : 2009-09-29Organization : LVS Draft Issue Date : 2009-10-01Country : Latvia Latest Date for Comments : 2009-12-01Project ID : 00001019/0001 Project EstablishedICS : 23.040.01, 91.140.40National Ref : LVS 445-1Title : Operation and maintenance of natural gas distribution and consumer supply systems

with max.operaton pressure 1,6 MPa (16 bar). Part 1: General requirementsScope : This standard establishes general requirements for legal and physical persons performing

adjustment, technical maintenance and repair of natural gas distribution system, installation pipework and gas appliances with working pressure up to 1,6 Mpa

Relatedness :National : REV/AMD LVS 445

Subsector : I40 Registration Date : 2009-09-29Organization : LVS Draft Issue Date : 2009-10-01Country : Latvia Latest Date for Comments : 2009-12-01Project ID : 00001020/0001 Project EstablishedICS : 23.040.01, 91.140.40National Ref : LVS 445-2Title : Operation and maintenance of natural gas distribution and consumer supply systems

with max.operaton pressure 1,6 MPa (16 bar). Part 2: Maintenance terms, work description and executive documentation

Scope : This standard establishes requirements for technical documentation, terms, work procedures and work content of adjusting, maintaining and repairing natural gas distribution pipeline, service line and installation pipework and equipment

Relatedness :National : REV/AMD LVS 445

Page 34


** End of Sector **




Sector M : METALLIC MATERIALS


Page 36Subsector M05: WELDING.

Subsector : M05 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903053/0001 Project EstablishedICS :National Ref : BS XXXXTitle : Welding. Recommendations for arc welding of the welding of reinforcing steel


Subsector : M05 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165646/0001 Project EstablishedICS :National Ref : PR NF A81-362Title : Welding, soldering, brazing, braze-welding - Filler metals for soldering, brazing and

braze-welding - Classification, coding, acceptance testing

Relatedness :National : REV/AMD NF A81-362:200210 (A81-362)


** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 38Subsector N04: REFRACTORIES.

Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1309C560/0001 Project EstablishedICS : 83.140.10National Ref : E1309C560Title : Plastics film and sheeting - Determination of mass per unit area and gravimetric

thicknessScope : The standard describes the methods for determining the mass per unit area and average

gravimetric thickness of films and leaves for plastics.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C131/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C131Title : Recycled plastics materials - Part 1: GeneralScope : The standard classifies recycled plastics (excluding those ones to be recovered directly from

the manufacturer), for use in the manufacture of semi-finished and finished manufactured goods. The classification is provided on the basis of the family of the polymer source, origin and destination of the technological requirements.

Relatedness :National : REV/AMD UNI 10667-1:1998 + A1:2000

Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C132/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C132Title : Recycled plastics materials - Polyethylene from industrial residue and/or from post

consumer materials to be used for general purposes - Part 2: Requirements and test methods

Scope : The standard defines the requirements and test methods for recycled polyethylene, from industrial waste and / or post-consumer materials for different uses.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C133/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C133Title : Recycled plastics materials - Polypropylene from industrial residue and/or from post

Page 39

Title : consumer materials to be used for general purposes - Part 3: Requirements and test methods

Scope : The standard defines the requirements and test methods of recycled polypropylene from industrial waste and / or post-consumer materials for different uses.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C134/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C134Title : Recycled plastics materials - Polyvinylchloride from containers for liquids to be used for

general purposes - Part 4: Requirements and test methodsScope : The standard defines the characteristics of recycled polyvinylchloride recycling, from

containers for liquids for different uses.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C135/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C135Title : Recycled plastics materials - Polyvinylchloride from plasticized products to be used for

general purposes - Part 5: Requirements and test methodsScope : The standard defines the requirements and test methods for recycled plasticized

polyvinylchloride (R PVC-P) products from various plasticized products.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C136/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C136Title : Recycled plastics materials - Polyvinylchloride from windows frames to be used for

general purposes - Part 6: Requirements and test methodsScope : The standard defines the requirements and test methods of recycled polyvinylchloride from

windows frames, for general purposes.


Subsector : N04 Registration Date : 2009-09-22Organization : UNI

Page 40

Country : ItalyProject ID : 1325C137/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C137Title : Recycled plastics materials - Polyethylenterephtalate from post consumer for the

production of fibres - Part 7: Requirements and test methodsScope : The standard defines the characteristics of recycled polyethylenterephtalate from post-

consumer for the production of fibres. (Includes updated sheet in 2000).


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C138/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C138Title : Recycled plastics materials - Polyethylenterephtalate from post- consumer to be used

for blow moulding - Part 8: Requirements and test methodsScope : The standard defines the characteristics of recycled polyethylenterephtalate from post-

consumer, for the production of hollow items. (Includes updated sheet in 2000).


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C139/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C139Title : Recycled plastics materials - Polyethylenterephtalate from post- consumer to be used

for the production of sheets and sheetings - Part 9: Requirements and test methodsScope : The standard defines the characteristics of recycled polyethylenterephtalate from post-

consumer for the production of sheets and foils. (Includes updated sheet in 2000).


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C13A/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C13ATitle : Recycled plastics materials - Polystyrene from post-consumer to be used for general

purposes - Part 10: Requirements and test methodsScope : The standard defines the requirements and test methods of recycled polystyrene for

homopolymer types (crystal) and shockproof, from industrial waste and / or post-consumer for different uses.


Page 41

Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C581/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C581Title : Recycled plastic materials from recovery of durable goods to end of life - Part 1: GeneralScope : The standard classifies the recycled plastics from the recovery of durable goods at the end

of their lives for a better use in the manufacture of semi-finished and finished products.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C582/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C582Title : Recycled plastic materials from recovery of durable goods to end of life - Polypropylene

- Part 2: Requirements and test methodsScope : The standard defines the characteristics and test methods for the characterization of

recycled polypropylene (PP REL) from the recovery of durable goods at the end of life for general use and specific uses.


Subsector : N04 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1325C593/0001 Project EstablishedICS : 13.030.50, 83.080.01National Ref : E1325C593Title : Plastics packaging from post-consumer selected as homogeneous fractions -

Assessment of conformity of the batch to the specification of homogeneity - Polyethylene (PE) films and sheeting

Scope : The standard defines a method of sampling and of the assessment of conformity to a given homogeneity specification of a batch of polyethylene films and sheeting from post-consumer polyethylene to be used to the production of recycled plastic materials from the selection processes.



Subsector N05: TEXTILES.

Subsector : N05 (Secondary Subsector)


Organization : BSI

Page 42

Country : United KingdomProject ID : 00903033/0001 Project EstablishedICS :National Ref : BS 2F 128:1992+A2Title : Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally

R 310 tex). Amendment


Subsector : N05 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165831/0001 Project EstablishedICS :National Ref : PR NF G07-079Title : Textiles - Yarns- Method for determination of twist in yarns made of combed wool

Relatedness :National : REV/AMD NF G07-079:198007 (G07-079)

Subsector : N05 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165832/0001 Project EstablishedICS :National Ref : PR NF G37-135Title : Coated fabrics - Classification of water resistant breathable coated fabrics

Relatedness :National : REV/AMD G37-135:199310 (G37-135)


Subsector N09: PLASTICS.

Subsector : N09 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1321C440/0001 Project EstablishedICS : 55.160, 83.140.01National Ref : E1321C440Title : Plastics disposable crates for fruits and vegetables - Types, requirements and test

methodsScope : The standard defines the dimensions and the minimum mechanical characteristics of the

expandable polystyrene disposable crates for the transport of fruits and vegetables and related test methods.


Subsector : N09 Registration Date : 2009-09-22Organization : UNI

Page 43

Country : ItalyProject ID : 1321C470/0001 Project EstablishedICS : 55.180, 83.140.01National Ref : E1321C470Title : Plastic trays for the production of bedders of fruits, flowers and vegetable plants -

Types, requirements and test methodsScope : The standard defines the dimensions and the minimum values of the characteristics rigid

trays in the form of parallelepiped, to be used for the production and the transport in greenhouse or in field of flowers and vegetable plants and related test methods.


Subsector : N09 Registration Date : 2009-09-07Organization : AENORCountry : SpainProject ID : P0034096/0001 Project EstablishedICS :National Ref : PNE-ISO 4593Title : Plastics -- Film and sheeting -- Determination of thickness by mechanical scanningScope : This standard specifies a method for the determination of the thickness of a sample of

plastics film or sheeting by mechanical scanning

Relatedness :National : REV/AMD UNE 53213-2:1986, UNE 53213-2/1M:2001

Subsector : N09 Registration Date : 2009-09-07Organization : AENORCountry : SpainProject ID : P0034135/0001 Project EstablishedICS :National Ref : PNE 53974Title : Plastics. Expanded polystyrene (EPS) elements for floors with concrete applied in situScope : This standard specified the classification, designation and specifications of EPS for floors

with concrete applied in situ

Relatedness :National : REV/AMD UNE 53974:1998, UNE 53976:1998


Subsector N14: PLASTICS PIPES.

Subsector : N14 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00902953/0001 Project EstablishedICS :National Ref : BS 7291-1Title : Thermoplastics pipes and associated fittings for hot and cold water for domestic

purposes and heating installations in buildings. Part 1. General Requirements


Page 44


purposes and heating installations in buildings. Part 2. Specification for polybutylene (PB) pipes and associated fittings



purposes and heating installations in buildings. Part 3. Specification for cross-linked polyethylene (PE-X) pipes and associated fittings


Subsector : N14 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 05401157/0001 Project EstablishedICS :National Ref : 05401157Title : Thermoplastics materials for fittings - Polyphenylene sulfone (PPSU) - General quality

requirements and testing


Subsector : N14 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 05401158/0001 Project EstablishedICS :National Ref : 05401158Title : Thermoplastics materials for fittings - Polysulfone (PSU) - General quality requirements

and testing


Page 45

Subsector : N14 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 05401159/0001 Project EstablishedICS :National Ref : 05401159Title : Thermoplastics materials for fittings - Polyvinylidene fluoride (PVDF) - General quality

requirements and testing



Subsector N20: CERAMICS.

Subsector : N20 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165824/0001 Project EstablishedICS :National Ref : PR XP B44-200Title : Photocatalysis - Test method for independent air purification devices for tertiary sector

and residential applications



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 47Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT.

Subsector : S04 Registration Date : 2009-09-29Organization : SIS Draft Issue Date : 2009-09-28Country : Sweden Latest Date for Comments : 2009-11-28Project ID : 08760013/0001 Draft for public enquiryICS :National Ref : 8760013Title : Determination of contact pressure on mattresses, beds an other underlay Scope : This standard is a new standard. There is currently no international standardized method to

measure pressure on mattresses and other bed components which is often required when hospitals wish to buy new mattresses


Subsector : S04 Registration Date : 2009-09-30Organization : PKNCountry : PolandProject ID : 17600177/0001 Project EstablishedICS : 13.340.20, 95.020National Ref : prPN-V-87001Title : Light ballistic armours -- Ballistic protection helmets -- General requirements and testsScope : Describes requirements and test methods of bulletproof and fragment proof helmets

Relatedness :National : REV/AMD S04

Subsector : S04 Registration Date : 2009-09-30Organization : PKNCountry : PolandProject ID : 17600178/0001 Project EstablishedICS : 13.340.99, 95.020

National Ref : prPN-V-87000

Title : Light ballistic armours -- Ballistic protection vests -- General requirements and testsScope : Gives general requirements for ballistic resistance of bullet and fragment proof vests for

marking, quality of manufakture, design, reliability. Describes the ways of packing, transportation and storage. Identifies examination testing procedures for above requirements of vests with those for internal acceptance



Subsector S09: WATER QUALITY AND WATER SUPPLY.

Subsector : S09 Registration Date : 2009-09-28Organization : AFNORCountry : FranceProject ID : FA165837/0001 Project EstablishedICS :National Ref : PR XP T90-140

Page 48

Title : Water quality - Determination of four chemical forms of arsenic: method by high-pressure liquid chromatography (CLHP) coupled with a mass spectrometer with plasma led by high frequency (ICP-MS)



Subsector S23: PERSONAL & PROPERTY PROTECTION AGAINST AGGRESSION/ BURGLARY.

Subsector : S23 (Secondary Subsector)


Organization : PKNCountry : PolandProject ID : 17600177/0001 Project EstablishedICS : 13.340.20, 95.020National Ref : prPN-V-87001Title : Light ballistic armours -- Ballistic protection helmets -- General requirements and testsScope : Describes requirements and test methods of bulletproof and fragment proof helmets


Subsector : S23 (Secondary Subsector)


Organization : PKNCountry : PolandProject ID : 17600178/0001 Project EstablishedICS : 13.340.99, 95.020

National Ref : prPN-V-87000

Title : Light ballistic armours -- Ballistic protection vests -- General requirements and testsScope : Gives general requirements for ballistic resistance of bullet and fragment proof vests for

marking, quality of manufakture, design, reliability. Describes the ways of packing, transportation and storage. Identifies examination testing procedures for above requirements of vests with those for internal acceptance



Subsector S99: UNDETERMINED.

Subsector : S99 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00902875/0001 Project EstablishedICS :National Ref : BS 6612Title : Specification for graduated compression hosiery


Page 49

Subsector : S99 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00902876/0001 Project EstablishedICS :National Ref : BS 7563Title : Specification for non-prescriptive graduated support hosiery


Subsector : S99 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00902877/0001 Project EstablishedICS :National Ref : BS 7672Title : Specification for compression, stiffness and labelling of anti-embolism hosiery



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 51Subsector T02: AEROSPACE.

Subsector : T02 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903033/0001 Project EstablishedICS :National Ref : BS 2F 128:1992+A2Title : Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally

R 310 tex). Amendment


Subsector : T02 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903034/0001 Project EstablishedICS :National Ref : BS 4A 102:2002 Corrigendum 1Title : Specification for steel bolts (Unified hexagons and Unified threads) for aircraft.

Corrigendum



Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT

Subsector : T09 Registration Date : 2009-09-01Organization : BSICountry : United KingdomProject ID : 00903045/0001 Project EstablishedICS :National Ref : BS 8438:2004+A1Title : Troughed belt conveyors. Specification. Amendment


Subsector : T09 Registration Date : 2009-09-07Organization : AENORCountry : SpainProject ID : P0034152/0001 Project EstablishedICS :National Ref : PNE 109108-1Title : Chemical storage. Control of static electricity. Part 1: Ground connection clamp.Scope : This standard defines the ground connection clip for the discharge of static electricity

during the loading and unloading operation of flammable chemical products

Relatedness :National : REV/AMD UNE 109108-1:1995

Page 52

Subsector : T09 Registration Date : 2009-09-07Organization : AENORCountry : SpainProject ID : P0034153/0001 Project EstablishedICS :National Ref : PNE 109108-2Title : Chemical storage. Control of static electricity. Part 2: Ground connection terminal.Scope : This standard defines the ground terminal clip for the discharge of static electricity during

the loading and unloading operation of flammable chemicals products

Relatedness :National : REV/AMD UNE 109108-2:1995


Subsector T14: PACKAGING.

Subsector : T14 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1321C450/0001 Project EstablishedICS : 55.180, 83.140.01National Ref : E1321C450Title : Plastics re-usable crates for fruits and vegetables - Types, requirements and test

methodsScope : The standard describes the re-usable plastics crates, to be used in the system distribution of

fruits and vegetables, from the production to to the sales.


Subsector : T14 Registration Date : 2009-09-22Organization : UNICountry : ItalyProject ID : 1321C460/0001 Project EstablishedICS : 55.180.40, 83.140National Ref : E1321C460Title : Plastics punnets for fruits and vegetables packaging - Types, requirements and test

methodsScope : The standard defines types, requirements and test methods of the light containers as

punnets fabricated by thermoforming from sheeting of thermoplastic transparent or coloured materials for the packaging of fruits and vegetables.



Subsector T19: ROAD SAFETY.

Subsector : T19 Registration Date : 2009-09-30Organization : SNV Draft Issue Date : 2009-09-22Country : Switzerland Latest Date for Comments : 2009-11-02Project ID : CH090025/0001 Draft for public enquiryICS : 93.080.30

Page 53

National Ref : SN 640803Title : Traffic management on highways and roads; variable signals



Subsector T20: TRAM- AND RAILWAY ENGINEERING.

Subsector : T20 Registration Date : 2009-09-15Organization : DINCountry : GermanyProject ID : 08700595/0001 Project EstablishedICS :National Ref : 08700595Title : Ahesive bonding of railway vehicles and parts



** End of Sector **