Monthly Notifications Register · Title : Authorized services for paper cutting machinery – Rules Scope : This standard includes rules for operating, structural feature, technical

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2013-12-01 to 2013-12-31

Register issued on : 2014-01-14

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A09: FACILITY MANAGEMENT

Subsector : A09 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst09782/0001 Project EstablishedICS : 75.160.20National Ref :Title : Facilities and equipment for receipt and delivery of liquid fuels (Stanag 3756) Scope : This standard covers the facilities and equipment for receipt and delivery of liquid fuels in

FEBA.

Relatedness :National : NewInternational : Modified STANAG 3756 ED.4:2002

** End of Subsector **

Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2013-12-02Organization : TSECountry : TurkeyProject ID : tst12420/0001 Project EstablishedICS : 03.080.30, 23.020.10, 23.040National Ref :Title : Competent services for pressured vessels and tanks – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of pressure vessels and tanks 300 liters and above, below and above ground in the used liquid or gaseous LPG, CNG, oxygen, nitrogen, acetylene, etc. gases for applications with a cryogenic.

Relatedness :National : New

Subsector : A11 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst12425/0001 Project EstablishedICS : 03.080.10National Ref :Title : Authorized services for printing machines – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of authorized services of printing machines


Subsector : A11 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst12510/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services for Earth and moving machinery – Rules

Page 4

Scope : This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of earth and moving machinery.


Subsector : A11 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst12658/0001 Project EstablishedICS : 03.080.30, 65.060.01National Ref :Title : Authorized services for Agricultural equipment and machinery - for moving and

transporting equipments - RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of authorized services of agricultural equipment and machinery - for moving and transporting equipments.


Subsector : A11 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : tst12683/0001 Project EstablishedICS : 03.080.30, 59.120.01National Ref :Title : Authorized services- For textile and clothes machines – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of authorized services of textile and clothes machines.


Subsector : A11 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst12690/0001 Project EstablishedICS : 03.080.30, 27.160National Ref :Title : Competent services for solar energy systems – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of solar energy systems.


Subsector : A11 Registration Date : 2013-12-02Organization : TSE

Page 5

Country : TurkeyProject ID : tst12849/0001 Project EstablishedICS : 03.080.30, 13.320National Ref :Title : Authorized services for alarm equipments. - Rules Scope : This standard includes rules for operating, structural characteristics, technical equipment

personal specifications and certification of competent services for alarm equipment - Rules.


Subsector : A11 Registration Date : 2013-12-20Organization : TSECountry : TurkeyProject ID : tst13150/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services for paper cutting machinery – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of authorized services of paper cutting machinery of (paper slitting machine, paper roll cutting machine, paper roll cutting machine etc.)


Subsector : A11 Registration Date : 2013-12-02Organization : TSECountry : TurkeyProject ID : tst13165/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services for topographic surveying instruments - RulesScope : This standard includes rules for managements, structural characteristics, technical

equipment and personal characteristics of topographic surveying instruments.


Subsector : A11 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : tst13273/0001 Project EstablishedICS : 03.080.30, 97.030National Ref :Title : Authorized services for sewing machines – RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of authorized services of sewing machines used in home and similar places.


Page 6

Subsector : A11 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst13288/0001 Project EstablishedICS : 03.080.30, 25.140.01National Ref :Title : Competent services for asphalt and/or concrete processing machinery - RulesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of constitutive hydraulic system all of asphalt and/or concrete processing machinery.


Subsector : A11 Registration Date : 2013-12-02Organization : TSECountry : TurkeyProject ID : tst94265/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services for automatic parking structures - RulesScope : This standard includes rules for operating, structural characteristics, technical equipment

personal specifications and certification of competent services for automatic parking structures - Rules.



Subsector A12: CONSULTANCY SERVICES

Subsector : A12 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 8300A030/0001 Project EstablishedICS : 03.080.10National Ref : U8300A030Title : Coaching - Definitions, classification, requirements and service offerScope : This standard is a guide to the characteristics of the service of Coaching ***, from quotation

to closing the path. It defines the features that are considered to constitute good practice in the management of the service. *** Coaching Service: partnership, process aimed at reaching the objectives of the client, throughout appreciation and empowerment of the client's resources and performances personal and professional


Subsector : A12 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 8300A050/0001 Project Established

Page 7

ICS : 03.080.20National Ref : U8300A050Title : Management consulting - Management control - Guideline for the design and

implementation of a management control model for SMEScope : The standard defines the guidelines on two key issues:

1. Practical Guidelines for SMEs (including micro enterprises) those want to approach and implement a effective model of management control 2. Qualification of suppliers of consultancy services in the field of management control Content of the standard • Terminology (general and specific) • normative References • Managing a project on management control • Initial analysis of the needs • Check consistency with the general ledger • Indicators and indices and their validation • Testing the Project • Review of the project • Periodic reporting • Monitoring • Qualification of supplier and team work Bibliography


Subsector : A12 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 8300A060/0001 Project EstablishedICS : 03.180National Ref : U8300A060Title : Services - Non formal education management system - Guideline for the application of

UNI ISO 29990Scope : The standard provides guidance for the application of UNI ISO 29990, in particular the

essential documents to be prepared, particular for the business plan (including economical and financial feasibility), in the medium/long period and risk assessment, with reference to the possible application of the principles of ISO 31000. The standard provides guidance for the internal audits. The standard will also include a brief list of the main topics to be evaluated and the main evidences for the verification of compliance, including the self-declaration process.



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 15900054/0001 Project EstablishedICS :National Ref : 15900054

Page 8

Title : Job related proficiency assessment


Subsector : A99 Registration Date : 2013-12-20Organization : TSECountry : TurkeyProject ID : tst10347/0001 Project EstablishedICS : 03.080.30, 91.040.10National Ref :Title : Kindergarden- General rulesScope : This standard includes general rules for physical structure, management rules and

personnel characteristics of kindergarden.


Subsector : A99 Registration Date : 2013-12-20Organization : TSECountry : TurkeyProject ID : tst12524/0001 Project EstablishedICS : 03.080.30National Ref :Title : General Rules For Cleaning ServicesScope : This standard includes rules for structural characteristics, operating, personal of cleaning

services



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 10Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 03100915/0001 Project EstablishedICS : 13.220.10National Ref : DIN 14380Title : Pressure limitation valve, nominal pressure 16


Subsector : B01 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 03100934/0001 Project EstablishedICS :National Ref : 03100934Title : Firefighting vehicles - Part 5: Group pumping appliance LF 10; Amendment A1


Subsector : B01 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 03100935/0001 Project EstablishedICS :National Ref : 03100935Title : Firefighting vehicles - Part 26: Group pumping appliance for rescue operations HLF 10;

Amendment A1



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2013-12-05Organization : SIST Draft Issue Date : 2014-05-01Country : Slovenia Latest Date for Comments : 2014-03-05Project ID : 00005467/0001 Project EstablishedICS :National Ref : dSIST 1037:2013Title : Bitumen and bituminous binders – Bitumen solutions for priming – RequirementsScope : This national standard defines national requirements which supplement the European

standard and which are not in conflict with the requirements in the European standard. The national standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country


Page 11

Subsector : B02 Registration Date : 2013-12-05Organization : SIST Draft Issue Date : 2014-05-01Country : Slovenia Latest Date for Comments : 2014-03-05Project ID : 00005468/0001 Project EstablishedICS : 91.100.50National Ref : dSIST 1039:2013Title : Flexible sheets for waterproofing - Plastic and rubber damp proof coursesScope : This national standard defines national requirements which supplement the European

standard and which are not in conflict with the requirements in the European standard. The national standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country


Subsector : B02 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026011/0001 Project EstablishedICS : 01.100.30National Ref : ÖNORM A 6241-2Title : Digital structure documentation - Part 2: Building Information Modeling (BIM) - Level 3-

iBIMScope : The present Austrian Standard specifies the technical implementation of a unified,

structured 3plus-dimensioned data model for building construction and related spatial civil engineering constructions based on Building Information Modeling (BIM). The data model represents the basis for the cooperation (technical implementation of data exchange and of a common data model as well as of data storage of information) of all those taking part in the the life time cycle management, starting from the idea, planning and execution, economic control up to demolition and disposal. This ÖNORM provides the bases for a comprehensive, unified, product-neutral, systematized exchange of graphical and meta data. The possibility of reverse compatibility with ÖNORM A 6241-1 is integrated part of the present standard.


Subsector : B02 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026019/0001 Project EstablishedICS : 01.100.30National Ref : ÖNORM A 6241-1Title : Digital structure documentation - Part 1: CAD-data structures and Building Information

Modeling (BIM) - Level 2Scope : The present Austrian Standard specifies the technical implementation of data exchange and

data storage for information on building construction and related spatial civil engineering constructions which are required during the life time cycle management of real estate property. The digital documentation and/or template file are being offered by the Austrian Standards Institute under http://www.as-institute.at/development/downloads/oenorm-a-6241.html. A complete listing of these files is given in Annex H.

Page 12



Subsector B06: GYPSUM

Subsector : B06 Registration Date : 2013-12-04Organization : AENORCountry : Spain Latest Date for Comments : 2014-01-13Project ID : P0038055/0002 Draft for public enquiryICS :National Ref : PNE 102001Title : Gypsum rock. CharacterizationScope : This standard sets the technical specifications that has to satisfy gypsum mineral to be raw

material for manufacturing plasters, in the construction sector.

Relatedness :National : REV/AMD UNE 102001:1986


Subsector B07: GLASS

Subsector : B07 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026027/0001 Project EstablishedICS : 81.040.10National Ref : ÖNORM B 3716-7Title : Glass in building - Structural glass construction - Part 7: Applications for glassScope : The present Austrian Standard provides applications for glass based on ÖNORM B 3716 (all

parts).



Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026040/0001 Project EstablishedICS : 91.060.50National Ref : ÖNORM B 5330-10Title : Internal doors - Part 10: Steel frames for gypsum plasterboard wallsScope : This Austrian Standard shall be applied jointly with ÖNORM 5330-1; it includes

complementary requirements for steel cases produced from wrought or extruded steel sheet profiles, intended to be incorporated into in gypsum plasterboard walls. It applies to cases for rebated and butt (unrebated) single leaf doors with a mass of maximum 60 kg. For the installation of steel cases, gypsum plasterboards as well as of frames, ÖNORM B 5335, ÖNORM B 3358-6 and ÖNORM B 3415 apply.

Page 13


Subsector : B08 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026042/0001 Project EstablishedICS : 91.060.50National Ref : ÖNORM B 5330-8Title : Internal doors - Part 8: Steel frames for solid wallsScope : This Austrian Standard shall be applied jointly with ÖNORM 5330-1; it includes

complementary requirements for steel cases produced from wrought or extruded steel sheet profiles, intended to be incorporated into solid walls. It applies to rebated and butt (unrebated) single leaf doors with a mass of maximum 90 kg. For steel cases installed in gypsum plasterboard walls, ÖNORM B 5330-10 applies. For the installation of steel cases, ÖNORM B 5335 shall be used; mounting instructions of the case manufacturers should also be observed.



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026030/0001 Project EstablishedICS : 91.100.60National Ref : ÖNORM B 6400-2Title : External thermal insulation composite systems (ETICS) - Part 2: ProductsScope : This Austrian Standard specifies the characteristic values and basic features of products,

which are necessary for the application of ETICS according to ÖNORM B 6400-1. Evidence of these hast to be provided within the framework of the declaration of performance. In addition, this ÖNORM includes specifications for system components, accessory products and national proofs, e.g. for wind load.


Subsector : B09 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026032/0001 Project EstablishedICS : 91.100.60National Ref : ÖNORM B 6400-1Title : External thermal insulation composite systems (ETICS) - Part 1: Planning and

processingScope : The present Austrian Standard includes basic principles for planning and processing of

external thermal insulation composite systems (ETICS) in building construction and applies to all insulating material thicknesses. This ÖNORM shall be used for external thermal

Page 14

Scope : insulation composite systems (ETICS) on external building parts, on vertical surfaces as well as on surfaces which are not directly exposed to weathering (e.g. soffits). It only applies to bonded ETICS and to bonded ETICS with additional mechanical fixing and contains the basics for the standard safety proof. The ETICS have to provide a declaration of performance and to comply with the requirements according to ÖNORM B 6400-2. The connection of ETICS to windows and door height windows is not part of this ÖNORM.



Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185567/0001 Project EstablishedICS :National Ref : PR NF DTU 31.2 P3Title : DTU 31-2. Building works. Timberframe houses and buildings construction. Part 3:

Conception rules


Subsector : B10 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185573/0001 Project EstablishedICS :National Ref : PR NF DTU 51.4 P1-1Title : DTU 51.4 - Building works - Floors of timber or wood-based panels - Part 1-1: Technical

specifications



Subsector B13: SOLAR ENERGY

Subsector : B13 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042311/0001 Project EstablishedICS :National Ref : PNE 206010Title : Tests for verification of operating parameters on solar thermal electric plants with

technology of parabolic trough collectorsScope : This standard provides procedures and guidelines to carry out tests in solar thermal electric

plants based on the technology of parabolic trough collector to determine its operating parameters with an acceptable uncertainty


Page 15


Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185491/0001 Project EstablishedICS :National Ref : PR NF P94-093Title : Soils : Investigation and testing - Determination of the compaction characteristics of a

soil - Standard Proctor Test - Modified Proctor Test



Subsector B15: SANITARY APPLIANCES

Subsector : B15 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026003/0001 Project EstablishedICS : 91.140.10National Ref : ÖNORM M 7510-6Title : Verification of heating systems - Part 6: Periodic inspection of combined heat and power

plants Scope : This Standard represents the technical basis for assessment of emissions of combined heat

and power plants.


Subsector : B15 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026021/0001 Project EstablishedICS : 91.140.10National Ref : ÖNORM M 7510-7Title : Verification of heating systems - Part 7: Periodic inspection of heat pumpsScope : The present Austrian Standard defines the technical basis for energetic assessment of heat

pumps.



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2013-12-19Organization : ASICountry : Austria

Page 16

Project ID : 00025995/0001 Project EstablishedICS : 23.040.01, 25.220.60, 93.025, 93.030National Ref : ÖNORM B 5013-3Title : Corrosion protection by organic coatings for water and waste engineering in residential

areas - Testing of protective materials and requirementsScope : This ÖNORM specifies requirements for protective materials based on organic basis and

their testing. These protective materials are applied in sanitary and industrial engineering on the carrier material of parts of tubes and plants of the water supply, sewage disposal and purification for the purposes of ÖNORMEN B 5013-1 and 5013-2.


Subsector : B20 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026024/0001 Project EstablishedICS : 23.040.01, 25.220.60, 93.025, 93.030National Ref : ÖNORM B 5013-4Title : Corrosion protection by organic coatings for water and waste engineering in residential

areas - Testing of corrosion protection and requirementsScope : This ÖNORM is used for the testing of the applied surface protection of the carrier material

of parts of tubes and plants of the water supply, sewage disposal and purification for the purposes of ÖNORMEN B 5013-1 and 5013-2. For other carrier materials, the provisions of ÖNORM B 5013-4 can be applied analogously. Excluded from testing is the surface protection of machines, machine parts and steel structures and the surface protection of pipes and tanks, which serves only the temporary protection for storage and transport.



Subsector B21: BATHS

Subsector : B21 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026012/0001 Project EstablishedICS : 13.060.01, 13.060.25, 97.220.10National Ref : ÖNORM M 6213Title : Sole tubs - Requirements for treatment, operation, maintenance and inspectionScope : This ÖNORM applies for sole tubs which are used by one person and specifies requirements

for the treatment of the sole as well as guidelines concerning operation, maintenance and inspection of the system.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2013-12-05Organization : NEN

Page 17

Country : NetherlandsProject ID : 50001856/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-1:2013 Concept nlTitle : Code of practice gas installations - Section gaspipework - Part 1: Determination of gas

tightness of the gas installation - Standard method - Guidelines for NEN 1078 and NEN 8078

Scope : With the procedures of this code of practice the tightness of a gas installation for household use can be determined.


Subsector : B25 Registration Date : 2013-12-05Organization : NENCountry : NetherlandsProject ID : 50001857/0001 Project EstablishedICS : 91.140.40National Ref : NPR 3378-2:2013 Concept nlTitle : Code of practice for gas installations - Section gas pipe work - Part 2: Supplementary

methods on the determination of gas tightness of the gas installationScope : This part applies to clause 5.3 of NEN 1078. This document giv es in addition to the

standard determination method to determine the tightness of gas installations, extra possibilities to determine if the specifications of NEN 1078 are met.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2013-12-09Organization : SNV Draft Issue Date : 2013-12-04Country : Switzerland Latest Date for Comments : 2014-01-15Project ID : CH130038/0001 Draft for public enquiryICS : 93.080.20National Ref : SN 640461Title : Concrete ceiling; Conception, design, requirements

on the built-in surfaces

Relatedness :National : REV/AMD SN 640461b (2008)

Subsector : B26 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185266/0001 Project EstablishedICS :National Ref : PR NFP98-128Title : Road foundations. Road roller compacted concretes and high performances

cementitious granular material. Definition. Composition. Classification.


Page 18

Subsector : B26 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042364/0001 Project EstablishedICS :National Ref : PNE 41250-1Title : Test methods for measurement of pavement deflection. Part 1: Benkelman beamScope : This standard describes the procedure for obtaining surface deflection in a point under the

action of a standard load, transmitted by the wheels of a single axle type with a load of 127.53 kN (13 t), using the Benkelman beam , or similar devices


Subsector : B26 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042365/0001 Project EstablishedICS :National Ref : PNE 41250-2Title : Test methods for measurement of pavement deflection. Part 2: Lacroix deflectographScope : This standard describes the test procedure to determine the deflection of bituminous

pavements using the Lacroix deflectograph


Subsector : B26 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042366/0001 Project EstablishedICS :National Ref : PNE 41250-3Title : Test methods for measurement of pavement deflection. Part 3: Falling weight

deflectometerScope : This standard describes the test procedure for determining the deflection and the radius of

curvature of the deflection basin in a surface, induced by an impact force generated by the fall of a mass on a spring system and transmitted to the surface by means of a plate


Subsector : B26 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042367/0001 Project EstablishedICS :National Ref : PNE 41250-4Title : Test methods for measurement of pavement deflection. Part 4: CurviameterScope : This standard describes the test procedure for determining the deflection and radius of

Page 19

Scope : curvature of the deflection basin in a surface at regular steps of 5 m, when of the rear twin wheels of a single axle of 127.53 kN (13 t) is passing



Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185575/0001 Project EstablishedICS :National Ref : PRXP P 34-900/CNTitle : Self-supporting double skin metal faced insulating sandwich panels - Factory made

products


Subsector : B27 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042396/0001 Project EstablishedICS :National Ref : PNE 104304Title : Synthetic materials. Application. Determination of peel resistance of joints between

installed waterproofing synthetic sheetsScope : This standard defines a test method for the onsite determination of peel resistance of joints

for installed waterproofing synthetic sheets



Subsector B29: AGGREGATES

Subsector : B29 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 96001932/0001 Project EstablishedICS : 91.100.15National Ref : U96001932Title : Aggregates for concrete - Additional provisions for the application of EN 12620 - Part 2:

RequirementsScope : This standard has to be used in conjuction with UNI EN 12620 and it contains the additional

italian provisions where they are required or permitted.

Relatedness :National : REV/AMD UNI 8520-2:2005


Page 20Subsector B30: FLOOR AND SURFACING

Subsector : B30 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185389/0001 Project EstablishedICS :National Ref : PR NF P90-113Title : Sports grounds - Natural turf sport areas - Specifications for constructions


Subsector : B30 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185390/0001 Project EstablishedICS :National Ref : PR NF P90-100Title : Surfaces for sports areas - Synthetic material surface-coated athletics tracks and run-up

areas - Construction requirements and inspections


Subsector : B30 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185391/0001 Project EstablishedICS :National Ref : PR NF P90-110Title : Sports grounds - Tennis courts - Construction conditions


Subsector : B30 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185392/0001 Project EstablishedICS :National Ref : PR NF P90-112Title : Sports grounds - Unbound mineral surfaces for outdoor sport areas - Specifications for

construction



Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2013-12-19

Page 21

Organization : ASICountry : AustriaProject ID : 00025996/0001 Project EstablishedICS : 91.140.10National Ref : ÖNORM H 7500-1Title : Heating systems in buildings - Method for calculation of the design heat load for

buildings with an average U value of at least 0,5 W/(m2 . K) - National amendment to ÖNORM EN 12831

Scope : The present Austrian Standard defines methods for the calculation of the design heat leak and the design heat load for buildings with an average U value of at least 0,5 W/(m2 . K) within design conditions.


Subsector : B31 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00025997/0001 Project EstablishedICS : 91.140.10National Ref : ÖNORM H 7500-2Title : Heating systems in buildings - Method for calculation of the design heat load for

buildings with an average U value below 0,5 W/(m2 . K)Scope : The present Austrian Standard defines methods and required national input data and

parameter for the calculation of the design heat load for buildings with an average U value of below 0,5 W/(m2 . K).


Subsector : B31 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026035/0001 Project EstablishedICS : 91.140.10National Ref : ÖNORM H 5160-1Title : Heating and cooling incorporated in building elements - Part 1: Planning and installation

for floor, ceiling and wall heating and cooling - National amendment to ÖNORM EN 1264 (all parts) and ÖNORM EN 15377 (all parts)

Scope : This Austrian Standard defines the conditions for planning and installation of surface heating and cooling systems, the heating and cooling elements of which are not embedded in the central concrete core of a building. This Austrian Standard shall be applied with ÖNORM EN 1264 (all parts) and ÖNORM EN 15377 (all parts).


Subsector : B31 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026039/0001 Project EstablishedICS : 91.140.10, 91.140.30National Ref : ÖNORM H 5160-2

Page 22

Title : Heating and cooling incorporated in building elements - Part 2: Planning and installation for building element activation - National amendment to ÖNORM EN 1264 (all parts) and ÖNORM EN 15377 (all parts)

Scope : This Austrian Standard defines the conditions for planning and installation of surface heating and cooling systems, the heating and cooling elements of which are embedded in the central concrete core of a building. These include ceilings, exterior walls, interior walls and floors. This Austrian Standard shall be applied with ÖNORM EN 1264 and ÖNORM EN 15377.


Subsector : B31 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026041/0001 Project EstablishedICS : 91.140.10, 91.140.30National Ref : ÖNORM H 5160-3Title : Heating and cooling incorporated in building elements - Part 3: Planning and installation

of heating of building elements for draining and dry keeping - National amendment to ÖNORM EN 1264 (all parts) and ÖNORM EN 15377 (all parts)

Scope : This Austrian Standard defines the conditions for planning and installation of surface heating and cooling systems, to dehumidificate and dewater elements in buildings. These include ceilings, exterior walls, interior walls and floors. This Austrian Standard shall be applied with ÖNORM EN 1264 and ÖNORM EN 15377.



Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00025999/0001 Project EstablishedICS : 03.100.01National Ref : ÖNORM A 7002Title : Facility Management - Competencies of the profession of Facility ManagementScope : This ÖNORM provides a profil of te competencies for the profession of Facility

Management and defines the requiered fields of knowledge and experience.


Subsector : B99 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026004/0001 Project EstablishedICS : 65.020.20, 65.020.40National Ref : ONR 121113Title : Greening with wild plant seeds - Examples for living space types and seed mixturesScope : This ONR applies together with ÖNORM L 1113 for the greening of land with wild plants

Page 23

Scope : seeds, which are not used for sole plant-, fodder- or food-production.


Subsector : B99 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026033/0001 Project EstablishedICS : 91.010.20National Ref : ÖNORM B 1801-5Title : Project management in construction and operation - Part 5: Recommendations for

comparisons of key figuresScope : This ÖNORM provides a practical guide for the first figures comparison of objects. This

guide provides an overview of the pre-tuning without much effort with third parties, and allows a first comparison with other properties and organizations.


Subsector : B99 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026034/0001 Project EstablishedICS : 01.040.01, 91.010.10National Ref : ÖNORM B 1802-3Title : Real estate evaluation - Part 3: residual methodScope : The residual value method is used to determine the market value of undeveloped

properties, development projects and developed property in which a fundamental revitalization is planned. The residual value method is particularly suitable for: the valuation of undeveloped properties, if no suitable reference prices are available in sufficient numbers and therefore the application of the comparative value method (according to § 4 LBG) resigns; the assessment of fair value of an imminent, concretized project development or an under construction project; the valuation of developed properties that have reached the end of their economic usefulness and for which therefore a revitalization / redevelopment is planned and to check the highest and best use of developed properties.


Subsector : B99 Registration Date : 2013-12-05Organization : NENCountry : NetherlandsProject ID : 50001855/0001 Project EstablishedICS : 91.140.01National Ref : NPR 4768:2013 Concept nlTitle : Condition assessment - Definition and pictures of decomposition and failing parts are

present. Furthermore the intensities of the failures are visualised and can be used as a reference.

Scope : This standard gives requirements for measurements, arrangement and use of materials for meter cupboards and their structural provisions for installation of pipes and cables into dwellings. This standard is not applicable for caravans.

Page 24



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 26Subsector C01: Food products

Subsector : C01 Registration Date : 2013-12-18Organization : MSZT Draft Issue Date : 2014-01-01Country : Hungary Latest Date for Comments : 2014-02-01Project ID : 60301312/0001 Project EstablishedICS : 67.160.20National Ref :Title : Soda-water

Relatedness :National : REV/AMD MSZ 8808:1995

Subsector : C01 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185551/0001 Project EstablishedICS :National Ref : PR XP V03-779Title : Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains -

Routine method with the Pohl grain cutter


Subsector : C01 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185552/0001 Project EstablishedICS :National Ref : PR XP V03-778Title : Durum wheat (T. durum Desf.) - Determination of the percentage of mitadine grains ¿

Rapid method with scalpel


Subsector : C01 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185554/0001 Project EstablishedICS :National Ref : PR XP V09-503Title : Sensory analysis - Performance measurement for panel(s) conducting conventional

sensory profiles


Page 27

Subsector : C01 Registration Date : 2013-12-04Organization : AENORCountry : Spain Latest Date for Comments : 2014-01-03Project ID : P0042038/0002 Draft for public enquiryICS :National Ref : PNE 195004:2013/1MTitle : Guide for trazability of fishery and aquaculture products.Scope : This project provides guidance to comply with correct identification requirements of fishery

products aiming at complying with legal requirements on traceability through the whole chain, from fishing to commercialization.

Relatedness :National : REV/AMD UNE 195002:2009, UNE 195004:2013

Subsector : C01 Registration Date : 2013-12-20Organization : TSECountry : TurkeyProject ID : t1001596/0001 Project EstablishedICS : 67.160.20National Ref :Title : Peach NectarScope : This standard comprise peach nectar.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t1001597/0001 Project EstablishedICS : 67.160.20National Ref :Title : Apricot NectarScope : This standard comprise apricot nectar.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t1008444/0001 Project EstablishedICS : 67.180.10National Ref :Title : Turkish DelightScope : This standard covers turkish delight


Subsector : C01 Registration Date : 2013-12-20

Page 28

Organization : TSECountry : TurkeyProject ID : t1011213/0001 Project EstablishedICS : 65.020.20National Ref :Title : Safflower FlowersScope :

This standard covers safflower flowes doesn't cover safflower seeds and proseed safflower seeds, and prossed safflower flowers.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t1013351/0001 Project EstablishedICS : 67.080.10National Ref :Title : Lemon sauceScope : This standard specifies lemon sauce.It does not specify lemon juice and lemon concentrate.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t2003036/0001 Project EstablishedICS : 65.140National Ref :Title : HoneyScope : This standard specifies honey


Subsector : C01 Registration Date : 2013-12-20Organization : TSECountry : TurkeyProject ID : t2011149/0001 Project EstablishedICS : 67.160.20National Ref :Title : Turnip JuiceScope : This standard specifies turnip juice.


Subsector : C01 Registration Date : 2013-12-23Organization : TSE

Page 29

Country : TurkeyProject ID : t3000886/0001 Project EstablishedICS : 67.200.10National Ref :Title : Edible Sunflowerseed Oil Scope : This standard covers edible sunflowerseed oil.


Subsector : C01 Registration Date : 2013-12-20Organization : TSECountry : TurkeyProject ID : t3004214/0001 Project EstablishedICS : 67.080.20National Ref :Title : Mixed PickleScope :

This standard applies to mixed pickle.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t3007800/0001 Project EstablishedICS : 67.140.30National Ref :Title : ChocolateScope : This standard specifies chocolate.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t3012720/0001 Project EstablishedICS : 67.080.10, 67.080.20, 67.160.20National Ref :Title : Traditional sour pomegranate concentrate.Scope : This standard specifies to traditional pomegranate concentrate.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t4000143/0001 Project Established

Page 30

ICS : 67.060National Ref :Title : Lentils (Whole and Decorticated)Scope : This standard, applies to whole unshelled and decorticated dry lentils. It does not apply to

lentil seeds kept for sowing.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : t4001331/0001 Project EstablishedICS : 67.100.20, 67.200.10National Ref :Title : ButterScope : This standard applies to butter which is defined in clause 0.2.


Subsector : C01 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : tst12536/0003 Project EstablishedICS : 67.160.20National Ref :Title : Cornelian cherry nectar Scope : This standard is specifiy to cornellian sherry nectar.


Subsector : C01 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : tst94543/0001 Project EstablishedICS : 67.160.20National Ref :Title : Betel nut Juice.Scope : This standard covers betel nut Juice



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2013-12-05Organization : NENCountry : Netherlands

Page 31

Project ID : 50001859/0001 Project EstablishedICS : 25.220.40, 25.220.60National Ref : NEN 5254:2013 Concept nlTitle : Industrial application of organic coatings on hot-dip zinc coated or sherardized products

(duplex-system)Scope : NEN 5254 stipulates the quality requirements for the application of paint systems, powder

coatings and plastic coatings on hot dip galvanized products in a controlled industrial process. If a good end result is to be achieved, the following aspects must be controllable: - construction and composition of materials; - zinc layer and zinc surface; - pretreatment of the zinc surface; - organic coating system; - application of organic coating system; - control of coating system. The standard is applicable to discontinuous hot dip galvanized products, galvanized in accordance with EN-ISO 1461 and EN 10240, as well as products fabricated from continuously galvanized sheet galvanized in accordance with ISO 4998, which after galvanization and/or assembly are given an organic coating.



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042250/0001 Project EstablishedICS :National Ref : PNE 84125Title : Cosmetic raw materials. Sunscreens. Purity and assay by gas chromatography.Scope : This standard determines the method for the determination of purity and assay of

sunscreens by gas chromatography.

Relatedness :National : REV/AMD UNE 84125:2000, UNE 84645:2002

Subsector : C03 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042393/0001 Project EstablishedICS :National Ref : PNE 84128Title : Cosmetic raw materials. Sunscreens.1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)-

propane-1,3-dione.Scope : This standard includes specifications required by the 1-(4-tert-butylphenyl)-3-(p-

methoxyphenyl)-propane-1,3-dione, in cosmetic uses.


Subsector : C03 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042394/0001 Project EstablishedICS :

Page 32

National Ref : PNE 84646Title : Cosmetic raw materials. Sunscreens. 2-Phenylbenzimidazole-5-sulfonic acid.Scope : This standard includes specifications required by the 2-Phenylbenzimidazole-5-sulfonic

acid, in cosmetic uses.


Subsector : C03 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042395/0001 Project EstablishedICS :National Ref : PNE 84109Title : Cosmetic raw materials. Benzophenones. Determination of the purity by liquid

chromatography.Scope : This standard specifies the method for the determination of purity and assay of

benzophenones by liquid chromatography.



Subsector C06: ESSENTIAL OILS

Subsector : C06 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042251/0001 Project EstablishedICS :National Ref : PNE 84308Title : Essential oils. Essential oil of Spanish wild marjoram (Thymus mastichina L.)Scope : This standard specifies certain characteristics of the Essential oil of Spanish wild marjoram

(Thymus mastichina L.)


Subsector : C06 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042252/0001 Project EstablishedICS :National Ref : PNE 84305Title : Essential oils. Essential oil of neroli (Citrus aurantium L. ssp. aurantium syn. Citrus

aurantium L. ssp. amara var. pumilia) from Spain.Scope : his standard specifies certain characteristics of the Oil of neroli. (Citrus aurantium L. ssp.

aurantium syn. Citrus aurantium L. ssp. amara var. pumilia) of Spain. in order to facilitate assessment of its quality.


Page 33** End of Subsector **

Subsector C13: FERTILIZERS

Subsector : C13 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026014/0001 Project EstablishedICS : 13.030.99, 65.020.40National Ref : ÖNORM S 2210Title : Compost-soilsScope : This ÖNORM refers to the development, manufacture, identification/description and

application of compost-soils that are suitable for use as topsoil or vegetation layer to be installed in lawns, vegetable gardens, shrub- and tree plantings and flower beds. It sets out the requirements which must be met by compost-soil. The aim is to achieve an optimal growth of plants. In such an application, the permissible use of compost-soil as waste takes place according to AWG.



Subsector C20: EXPLOSIVES AND FIREWORKS

Subsector : C20 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : tst11019/0001 Project EstablishedICS : 95.020National Ref :Title : Ammunition-Procedure for the statistical comparison of external ballistic performance of

shell (Stanag 4106)Scope : This standard covers the ammunition procedure for the statistical comparison of external

ballistic performance of shell

Relatedness :National : NewInternational : Modified STANAG 4106 ED 3:1995

Subsector : C20 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst11738/0001 Project EstablishedICS : 95.020National Ref :Title : Definition of pressure terms and their inter-relationship for use in the desing and proof of

cannons and ammunition (Stanag 4110) Scope : This standard covers the definition of pressure terms and inter-relation ship for use in the

design and tests of cannons and ammunition.

Relatedness :National : NewInternational : Modified STANAG 4110 ED.4:2005


** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 35Subsector F06: TERMINOLOGY PRINCIPLES

Subsector : F06 Registration Date : 2013-12-23Organization : TSECountry : TurkeyProject ID : tst05894/0001 Project EstablishedICS : 01.140.20National Ref :Title : Glossary of Abbreviations Used in Nato DocumentsScope : This standard covers the glassary of abbreviations used in NATO documents.

Relatedness :National : NewInternational : Modified AAP-15 ED.D:1990


Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026029/0001 Project EstablishedICS : 01.040.11, 01.140.20National Ref : ÖNORM K 2204Title : General data format for biomedical signalsScope : Biomedical Signals (e.g. EEG, ECG, etc.) are, in addition to laboratory results and imaging

data, another important group of patient-related diagnostic measurements. For storage of biosignals, however, no commonly accepted standard is available. Its the aim of this work to specify a format which optimally combines the features of existing standards and open specifications (including SCP-ECG, MFER, EDF, HL7aECG/FDA-XML, 11073-10101, Dicom-Waveform and other open vendor-specific formats) in a general data format.



Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES

Subsector : F14 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042371/0001 Project EstablishedICS :National Ref : PNE 54123-2Title : Guidelines for colour management systems workflow and profile application. Part 2:

Digital printing, digital cameras and LCD/TFT monitors.Scope : This standard specifies a set of recommendations to improve the performance of colour

management system profiles in reproduction process (including displaying and printing) during characterization, building of profiles and use.

Relatedness :National : REV/AMD UNE 54123-2:2008


Page 36Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2013-12-09Organization : TSECountry : TurkeyProject ID : tst04518/0001 Project EstablishedICS : 29.100.20, 31.020National Ref :Title : Test Methods for Electrical and Electronic Component Parts for Military Purpose- Test

Method for DC Resistance Scope : This standard covers the test methods for DC resistance of electrical and electronic

component parts for military purpose.

Relatedness :National : NewInternational : Modified MIL-STD-202 G (2):2013


Subsector F17: ADMINISTRATIVE DOCUMENTS

Subsector : F17 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : t1018001/0001 Project EstablishedICS : 03.100.01, 13.100National Ref :Title : Occupational health and safety management systems - RequirementsScope : This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies

requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system.


Subsector : F17 Registration Date : 2013-12-04Organization : TSECountry : TurkeyProject ID : tst90228/0002 Project EstablishedICS : 03.100.01National Ref :Title : Social Responsibility Management System-RequırementsScope : This Standard establishes requirements for defining, implementing, maintaining and

improving a social responsibility management system so as to intagrate social responsibility within all the organization and to contribute to sustainable devolopment.

Relatedness :National : NewInternational : Identical to IQNet SR 10


Subsector F19: OPTICS

Subsector : F19 Registration Date : 2013-12-18

Page 37

Organization : DINCountry : GermanyProject ID : 02702669/0001 Project EstablishedICS :National Ref : 02702669Title : Production in optical engineering - Workpiece receptions for optics - Part 2: Chucks with

membranes


Subsector : F19 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 02702670/0001 Project EstablishedICS :National Ref : 02702670Title : Production in optical engineering; diamond impregnated pellets



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026009/0001 Project EstablishedICS : 11.180.01National Ref : ÖNORM A 2616Title : Universal usability of information and transaction machines (ITM) - BasicsScope : This standard specifies the fundamental design principles of barrier-free design information

and transaction machines (ITM) and their accessibility.


Subsector : F20 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026018/0001 Project EstablishedICS : 11.020National Ref : ONR 1115224Title : Guide for implementation of ÖNORM EN 15224 in rehabilitation and cure institutesScope : This ONR is a guidance for the implementation of ÖNORM EN 15224 in rehabilitation and

cure institutes. An essential element of the ONR is the interpretation of implementation options for the 11 quality criteria according to ÖNORM EN 15224.


Page 38

Subsector : F20 (Secondary Subsector)

Registration Date : 2014-12-30

Organization : TSECountry : TurkeyProject ID : t1018001/0001 Project EstablishedICS : 03.100.01, 13.100National Ref :Title : Occupational health and safety management systems - RequirementsScope : This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies

requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system.


Subsector : F20 (Secondary Subsector)

Registration Date : 2013-12-04

Organization : TSECountry : TurkeyProject ID : tst90228/0002 Project EstablishedICS : 03.100.01National Ref :Title : Social Responsibility Management System-RequırementsScope : This Standard establishes requirements for defining, implementing, maintaining and

improving a social responsibility management system so as to intagrate social responsibility within all the organization and to contribute to sustainable devolopment.

Relatedness :National : NewInternational : Identical to IQNet SR 10


Subsector F23: ENERGY

Subsector : F23 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026036/0001 Project EstablishedICS : 01.040.27, 27.010National Ref : ÖNORM M 7109Title : Concepts of energy management - Efficient use of energyScope : The terms and definitions included in this Austrian Standard are intended to increase the

awareness of users of the different possibilities to use energy efficiently and economically for all applications as well as to create a unified terminology in this subject field.



Subsector F99: UNDETERMINED

Page 39

Subsector : F99 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 09500389/0001 Project EstablishedICS :National Ref : 09500389Title : Graphical symbols - Safety colours and safety signs - Part 4: Code of practice for the

use of safety signs



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 41Subsector H03: CONSUMER QUESTIONS

Subsector : H03 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042369/0001 Project EstablishedICS :National Ref : PNE 175001-6Title : Service quality for small retail trade. Part 6: Requirements for service stations.Scope : This UNE standard states requirements for small retail which enable to provide a quality

service in service stations.



Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026002/0001 Project EstablishedICS : 97.220.10National Ref : ÖNORM M 6219-1Title : Requirements for public and commercial sauna installations, infrared cabins, steam and

other warm chambers - Part 1: Design and operation of saunas and saunas in combination with infrared thermal source

Scope : This OENORM is applicable for all sauna baths and sauna baths in combination with infrared heat sources as well as applicable on the needed associated secondary installations and provides guidance for planning and operating for such sauna facilities.


Subsector : H04 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026017/0001 Project EstablishedICS : 97.220.10National Ref : ÖNORM M 6219-2Title : Requirements for public and commercial sauna installations, infrared cabins, steam and

other warm chambers - Part 2: Design and operation of infrared cabins Scope : This ÖNORM provides guidance for planning and operating and is applicable for all infrared

cabins with wood surfaces or surfaces made of wood layer materials and is as well applicable on the needed associated secondary installation.



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2013-12-19

Page 42

Organization : ASICountry : AustriaProject ID : 00026013/0001 Project EstablishedICS : 03.180, 97.140National Ref : ÖNORM A 1650Title : Chairs and tables for general school education - Aditional requirements to ÖNORM EN

1729-1 and ÖNORM EN 1729-2Scope : This ÖNORM applies for chairs and tables for general education in schools (eg, elementary

school, AHS, secondary school, HTL). It also applies to chairs and tables, which can be used with laptop computers or similar portable devices, but not for special jobs such as in laboratories, computer work spaces.



Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)

Subsector : H33 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185362/0001 Project EstablishedICS :National Ref : PR NF S52-010Title : Computer vision systems for drowning detection in swimming pools - Safety

requirements and test methods



Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 04000314/0001 Project EstablishedICS :National Ref : 04000314Title : Methods for measuring of the energy use from equipment for commercial kitchens - Part

15: Double jacketed boiling and quick boiling pans


Subsector : H99 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 04000316/0001 Project EstablishedICS :National Ref : 04000316Title : Equipment for commercial kitchens - Multiple deck ovens - Requirements and testing

Relatedness :

Page 43

National : New


2: Commercial coffee machines



5: Tilting frying pans and stationary frying pans



6: Tilting pressure braising pans and stationary pressure braising pans



16: Kitchen Machinery



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 45Subsector I05: IRON PIPES

Subsector : I05 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00025998/0001 Project EstablishedICS : 23.040.10National Ref : ÖNORM B 2560Title : Ductile cast iron pipes - Finishing layer of polyurethane or epoxy materials -

Requirements and test methodsScope : This ÖNORM contains requirements and test applied of finishing layer - made during the

manufacturing process - of polyurethane ("PU") or epoxy resin ("EP") for pipes made of ductile cast iron with factory-applied zinc coating ÖNORM B 2555 according to the ÖNORMEN EN 545, EN 598 and EN 969 This finishing layer is suitable for pipes, which are both above and below the water level installed in the soil with a soil resistance of more than 1500 (ohm x Zentimeter). In differentiated assessment of the soil in accordance with the procedures contained in ÖNORM B 5013-1 tubes with this finishing layer can be used to a rating number of 15.


Subsector : I05 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026008/0001 Project EstablishedICS : 23.040.10National Ref : ÖNORM B 2562Title : Ductile cast iron pipes - Factory made lining with cement mortar - Requirements and

test methodsScope : The standard contains requirements and tests for cement mortar lining - applied in the

producing factory - of pipes made of ductile cast iron according to EN 545 and EN 598. It describes specific properties of the cement mortar, the manufacturing process, the surface quality and the minimum thickness of cement mortar linings for ductile iron pipes.



Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2013-12-18Organization : LVS Draft Issue Date : 2013-12-16Country : Latvia Latest Date for Comments : 2014-01-16Project ID : 00006017/0001 Draft for public enquiryICS : 23.020.30National Ref : LVS 415:2012/prA1Title : Assemblies of pressure equipment. Safety examination of existing assembliesScope : The standard defines the order of technical checks of assemblies of pressure equipment

with purpose to define, estimate risk factors and their factors of influence to the further using. The standard concerns on the inspection organizations which according to statutory acts of Republic of Latvia perform technical checks of assemblies of pressure equipment.

Relatedness :

Page 46

National : REV/AMD LVS 415:2012

Subsector : I06 Registration Date : 2013-12-18Organization : LVS Draft Issue Date : 2013-12-16Country : Latvia Latest Date for Comments : 2014-01-16Project ID : 00006018/0001 Draft for public enquiryICS : 27.060.30National Ref : LVS 416:2012/prA1Title : Boiler equipment. Safety examination of existing assembliesScope : Standart defines the procedures of the technical supervision of the new and used boilers

installations. Standart is rrelevant relevant to the inspection`s institutions what according with the normative acts carry out the technical supervision. Sandart allows to make controls and defines the safety level of the boilers installation.

Relatedness :National : REV/AMD LVS 416:2012


Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026026/0001 Project EstablishedICS : 23.020.30National Ref : ÖNORM M 7387-1Title : Central gas distribution plants - Part 1: Gas stations with transportable pressure vessels

up to 1000 litre capacityScope : The execution, the esteblishment and operating of central gas distribution plant are

treated. This ÖNORM does not appliy for gas generationplants, extinguishing systems according to TRVB 152 S and gases that are subject to the FGV 2002 .



Subsector I16: INTERNAL COMBUSTION ENGINES

Subsector : I16 Registration Date : 2013-12-09Organization : TSECountry : TurkeyProject ID : tst05732/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test Methods Military, Engine Driven for Generator Sets Endurance Test Scope : This standard covers the endurance test for engine driven in generator sets for military

purpose.

Relatedness :National : NewInternational : Modified MIL-STD-705 C NOT1:2011

Page 47

Subsector : I16 Registration Date : 2013-12-09Organization : TSECountry : TurkeyProject ID : tst06823/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military, engine driven generator sets maximum power test Scope : This standard covers the test methods for determining the maximum power test of engine

driven penerator for military uses.


Subsector : I16 Registration Date : 2013-12-09Organization : TSECountry : TurkeyProject ID : tst07063/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military, engine driven generator sets voltage dip and rise for rated

load test Scope : This standard covers the voltage dip and rise for rated load tests of engine driven generator

sets for military uses.



Subsector I31: VALVES

Subsector : I31 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042374/0001 Project EstablishedICS :National Ref : PNE 60713:2013/1MTitle : Stainless steel flexible hoses with connections for conduction of gaseous fuels up to a

pressure of 0,4 bar with a maximal length of 2 m.Scope : This standard aims to set the dimensions, technical and operating specifications, as well as

testing to be met by stainless steel tubing with stainless steel fittings for joining reception facilities for fixed appliances that use gas as fuel.



Subsector I40: INDUSTRIAL PIPING NETWORKS

Subsector : I40 Registration Date : 2013-12-18Organization : LVS Draft Issue Date : 2013-12-16Country : Latvia Latest Date for Comments : 2014-01-16Project ID : 00001030/0001 Draft for public enquiryICS : 91.140.40

Page 48

National Ref : LVS 417:2011/prA1Title : Gas distribution and Customer systems - External gas pipelines - DesignScope : The standard defines regulations to be followed in designing the natural gas distribution

systems and the user’s external gas supply system with maximal working pressure of 1,6 MPa (16Bar)

Relatedness :National : REV/AMD LVS 417:2011


** End of Sector **




Sector M : METALLIC MATERIALS


Page 50Subsector M01: STEEL

Subsector : M01 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185262/0001 Project EstablishedICS :National Ref : PR NF A02-053Title : Heat treatment - Control of quality



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 52Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042425/0001 Project EstablishedICS :National Ref : PNE 57088Title : Paper. Tearing with waxes testScope : This standard is intended to indicate the method followed to measure the surface

resistance of papers, with exception of short compacted papers, such as blotting papers and boards used in construction, as well as coated papers containing thermoplastic resins in their formulations.


Subsector : N01 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst01119/0001 Project EstablishedICS : 55.040, 85.060National Ref :Title : Corrugated fiberboard.Scope : This standard specifies types and characteristics, sampling and testing of corrugated

fiberboard, is used for production of boxes. Not specify fluting and single faced fiberboards.

Relatedness :National : NewEuropean : Modified DIN 55468-1:2004


Subsector N02: SOLID FUELS

Subsector : N02 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026005/0001 Project EstablishedICS : 75.160.10National Ref : ÖNORM M 7132Title : Energy-economical utilization of wood and bork as fuel - Definitions and propertiesScope : This Austrian Standard defines concepts intended to facilitate the economic and legal

transactions between producers and traders as well as consumers of fuels. Furthermore, it is used for technological evaluation of wood and bark as fuel. Specifications concerning environmental pollution are not dealt with by this ÖNORM.


Page 53

Subsector : N02 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042299/0001 Project EstablishedICS :National Ref : PNE 164004Title : Solid biofuels. Fuel Specifications and classes. Graded fruit shellsScope : This standard supports the use of fruit shells for non-industrial use (residential, small

businesses, public buildings) and industrial (industrial energy generation applications), providing a classification according to its quality.


Subsector : N02 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042300/0001 Project EstablishedICS :National Ref : PNE 164003Title : Solid biofuels. Fuel Specifications and classes. Graded olive stonesScope : This standard supports the use of olive stones for non-industrial use (residential, small

businesses, public buildings) and industrial (industrial energy generation applications), providing a classification according to its quality.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 0209E400/0001 Project EstablishedICS : 75.160.10National Ref : E0209E400Title : Solid recovered fuels - Specifications of SRF prepared from mechanical treatment of

non-hazardous wasteScope : The standard provides the specifications for SRF prepared from mechanical treatment of

non-hazardous waste, in accordance with UNI EN 15359. The SRF-fuels, as defined in the current legislation, is not included in this standard.


Subsector : N03 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185363/0001 Project EstablishedICS :National Ref : PR NF T60-144

Page 54

Title : Petroleum products - Lubricating greases - Determination of the sulfated ash


Subsector : N03 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185364/0001 Project EstablishedICS :National Ref : PR NF T60-156Title : Petroleum products. Desemulsification number of new non inhibited turbine oils. Water

vapour test.


Subsector : N03 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185365/0001 Project EstablishedICS :National Ref : PR NF T60-157Title : Petroleum products. Insolubles content of lubricating oils.



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2013-12-18Organization : TSECountry : TurkeyProject ID : tst10258/0001 Project EstablishedICS : 59.080.30National Ref :Title : Textiles - Fabrics - Determination of Pilling Resistance and Other Related Surface

Changes - Random Tumble Method Scope : This standard covers the determination of pilling resistance and other related surface

changes of fabrics by means of random tumble method.

Relatedness :National : NewInternational : Modified ASTM D 3512:2010


Subsector N06: RUBBER

Page 55

Subsector : N06 Registration Date : 2013-12-04Organization : AENORCountry : Spain Latest Date for Comments : 2014-01-13Project ID : P0041753/0001 Draft for public enquiryICS :National Ref : PNE 53572Title : Elastomers. Determination of weather resistance exposure of rubber articles used by

the automotive industryScope : This standard aims to evaluate the resistance to the surface cracking of the rubber in an

ozone environment



Subsector N07: SAWN TIMBER

Subsector : N07 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185393/0001 Project EstablishedICS :National Ref : PR NF X41-580-11Title : Wood preservatives - Physicochemical testing - Part 11 : low stability testing


Subsector : N07 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185394/0001 Project EstablishedICS :National Ref : PR NF X40-101Title : Wood preservatives - Identification criteria



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 05401514/0001 Project EstablishedICS : 17.180.20National Ref : DIN 6162Title : Determination of iodine colour number


Page 56** End of Subsector **

Subsector N11: WOOD-BASED PANELS

Subsector : N11 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00025994/0001 Project EstablishedICS : 01.100.99, 79.020National Ref : ÖNORM A 6210Title : Technical drawing for manufactoring of woodworkScope : This ÖNORM contains specifications for dimensions registrations and characters in

engineering drawings, which are necessary with other materials in the planning and processing of wood and brands of wood and / or wood materials or their compounds. Similarly, the technical diagrams and dimensions for space-forming structures and furnishings to be considered for the interior.


Subsector : N11 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185562/0001 Project EstablishedICS :National Ref : PR XP B54-202Title : Decorative wood-veneered panels. Specification.



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026001/0001 Project EstablishedICS : 23.040.20, 23.040.45, 91.140.80National Ref : ÖNORM EN 1455-1/ATitle : Plastics piping systems for soil and waste discharge (low and high temperature) within

the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system

Scope : This European standard specifies the requirements for pipes, fittings and the system of acrylonitrilebutadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) - inside buildings (marked with "B") - for both inside buildings and buried in ground within the building structure (marked with "BD").


Subsector : N14 Registration Date : 2013-12-19Organization : ASI

Page 57

Country : AustriaProject ID : 00026010/0001 Project EstablishedICS : 23.040.20, 23.040.45, 91.140.80National Ref : ÖNORM EN 1566-1/ATitle : Plastics piping systems for soil and waste discharge (low and high temperature) within

the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system

Scope : This European Standard specifies the requirements for pipes, fittings and the system of chlorinated poly(vinyl chloride) (PVC-C)solid-wall piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B") and for soil and waste discharge systems for both inside buildings and buried in ground within the building structure (marked with "BD").


Subsector : N14 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026016/0001 Project EstablishedICS : 23.040.20, 23.040.45, 91.140.80National Ref : ÖNORM EN 1565-1/ATitle : Plastics piping systems for soil and waste discharge (low and high temperature) within

the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system

Scope : This European Standard specifies the requirements for pipes, fittings and the system of styrene copolymer blends (SAN+PVC) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) inside buildings (marked with "B") and for soil and waste discharge systems for both inside buildings and buried in ground within the building structure (marked with "BD").


Subsector : N14 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026023/0001 Project EstablishedICS : 23.040.20, 91.140.40National Ref : ÖNORM EN 1555-1/ATitle : Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1:

GeneralScope : EN 1555-1 specifies general requirements for piping systems made of polyethylene (PE), to

be used for the gas supply.


Subsector : N14 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026025/0001 Project EstablishedICS : 23.040.20, 93.025, 93.030

Page 58

National Ref : ÖNORM EN 12201-1/ATitle : Plastics piping systems for water supply, and for drainage and sewerage under pressure

- Polyethylene (PE) - Part 1: GeneralScope : This Part of EN 12201 specifies the general aspects of polyethylene (PE) pressure piping

systems (mains and service pipes) for buried or above ground applications, intended for the conveyance of water for human consumption, including raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes.


Subsector : N14 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026028/0001 Project EstablishedICS : 23.040.20, 23.040.45, 93.030National Ref : ÖNORM B 5156-2Title : Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)

manholes and inspection chambers in traffic areas and deep underground installations - Part 2: Complementary provisions to ÖNORM EN 13598-2

Scope : This ÖNORM shall be used together with the ÖNORM EN 13598-2. It specifies the requirements for underground manholes and inspection chambers up to a depth of up to 6 m, measured between the ground surface and bottom of the main shaft, consisting of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) or Polypropylene with mineral modifiers (PP-MD) or polyethylene (PE). These products are designed for use in traffic areas for pedestrian and vehicular traffic and for buried applications in accordance with the general requirements of ÖNORM EN 476 as well as in applications outside of buildings (application area code "U").


Subsector : N14 Registration Date : 2013-12-04Organization : NBNCountry : BelgiumProject ID : BE059201/0001 Project EstablishedICS : 23.040.20National Ref : NBN T 42-116, ed 1Title : Plastics piping systems - PE 100 pipes with high resistance against slow crack

propagation (PE 100-RC pipes) - Specifications and methods of test


Subsector : N14 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042375/0001 Project EstablishedICS :National Ref : PNE 53394 INTitle : Plastics. Code for the installation and handling of polyethylene (PE) pipes for water

piping under pressure. Recommended techniques

Page 59

Scope : This standard provides recommendation on installation and handling of polyethylene (PE) pipes for water piping under pressure

Relatedness :National : REV/AMD UNE 53394:2006 IN


** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 61Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 20002530/0001 Project EstablishedICS : 13.160National Ref : U20002530Title : Acoustics - Review of methods for the assessment of noise from fixed sources to

ascertain its acceptability reported in technical standards or national legislationScope : The technical report is a collection of methods for the assessment of noise from fixed

sources to ascertain its acceptability reported in national standards or international standards or national legislation in force. It aims to provide a document base useful for the evaluations mentioned above.



Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2013-12-23Organization : UNICountry : ItalyProject ID : 20022560/0001 Project EstablishedICS : 17.160National Ref : U20022560Title : Elastomeric pads for railway/tramway tracks - Qualification and check tests to determine

their mechanical characteristics and performance parametersScope : This standard defines procedures to be followed for qualification and for check elastomeric

pads, used for track construction for train, metro, tram. The standard shall apply to all those pads elastomeric or similar, of any material simple and compound, used in the construction of rail track.



Subsector S08: AIR QUALITY

Subsector : S08 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026015/0001 Project EstablishedICS : 13.040.40, 91.140.10National Ref : ÖNORM M 7537Title : Periodic inspection of portable measuring instruments for the determination of exhaust

gas parameters of firing systems - Requirements for inspection bodies, testing procedure and test report for CO and relevant flue gas parameters

Scope : This ÖNORM specifies requirements for the periodic inspection of portable measuring instruments for the determination of NO, NO2 concentration and further relevant flue gas parameters, the exhaust gas and combustion air temperature, the discharge pressure and the smoke number in exhaust gases of combustion plants.

Relatedness :

Page 62

National : New

Subsector : S08 Registration Date : 2013-12-05Organization : NENCountry : NetherlandsProject ID : 50001860/0001 Project EstablishedICS : 13.040.20National Ref : NVN 2818:2013 Concept nlTitle : Odour quality - Sensory determination of the hedonic tone of an odour using an

olfactometerScope : This prestandard describes a method for the determination of the hedonic value of an

odour using an olfactometer and a panel of observers.


Subsector : S08 Registration Date : 2013-12-04Organization : AENORCountry : Spain Latest Date for Comments : 2014-01-13Project ID : P0041894/0002 Draft for public enquiryICS :National Ref : PNE 81599Title : Workplace exposure. Determination of airborne particles (inhalable, thoracic and

respirable fractions). Gravimetric method.Scope : This standard describes the procedure and equipment for the determination of the

airborne particles at the workplace through the sampling on an appropriate collection substrate and their gravimetric quantification. The standard is applicable to all of the airborne particles whose analysis requires gravimetric determination and it allows the determination of the health related fractions defined in UNE-EN 481 when the appropriate aerosol samplers were used. The procedure of measurement described can be used to carry out measurements to determine the occupational exposure concentration, measurements for comparison with limit values (occupational) to evaluate the exposition via inhalation and periodic measurements. It may also be used to carry out screening measurements of time weighted average concentration (see UNE-EN 481, 4.2) and screening measurements of variation of concentration in time and/or space (see UNE-EN 481, 4.3).



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026006/0001 Project EstablishedICS : 13.060.10, 93.025National Ref : ÖNORM B 2602Title : Water prospection - Spring water systems - Planning, construction and operationScope : This ÖNORM contains requirements for the design, construction and operation of spring

water systems. A spring water system consists usually of the source facility and room, the corresponding connection system and the overflow and drain pipe. This ÖNORM is also

Page 63

Scope : applicable for the conservation, restoration and decommissioning.


Subsector : S09 Registration Date : 2013-12-19Organization : ASICountry : Austria

Project ID : 00026020/0001Project

Established

ICS :13.060.20, 91.140.60, 91.140.65, 93.025

National Ref : ONR 22531Title : Water supply - Piping systems inside buildings - Standards and Guidelines Scope : This ONR provides an overview of the most important standards and guidelines, which are

taken into account in planning, execution, operation and maintenance of piping systems within buildings. Aspects of hygiene are also mentioned as fire protection aspects (fire services).


Subsector : S09 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026022/0001 Project EstablishedICS : 13.060.10, 93.025National Ref : ÖNORM B 2601Title : Water prospection - Wells - Planning, construction and operationScope : This ÖNORM contains requirements for the design, construction and operation of different

kinds of wells (eg boreholes, drilled wells, dug wells, horizontal filter wells) and other types of groundwater wells and for foreshafts for artesian well, which can serve the water extraction and respectively or the introduction of water. It also applies to all types of groundwater measuring points, for wells for groundwater conservation, for the rehabilitation and decommissioning.


Subsector : S09 Registration Date : 2013-12-18Organization : MSZT Draft Issue Date : 2014-01-18Country : Hungary Latest Date for Comments : 2014-03-18Project ID : 20135113/0001 Project EstablishedICS : 55.120National Ref :Title : Autosiphon apparatus. Part 2: Siphon-apparatus. 25-litre tank for aerated-drinks

Relatedness :National : REV/AMD MSZ 10138-2

Subsector : S09 Registration Date : 2013-12-18

Page 64

Organization : MSZT Draft Issue Date : 2014-01-18Country : Hungary Latest Date for Comments : 2014-03-18Project ID : 20135114/0001 Project EstablishedICS : 55.120National Ref :Title : Autosiphon apparatus. Part 3: Metal containers for domestic appliances


Subsector : S09 Registration Date : 2013-12-18Organization : MSZT Draft Issue Date : 2014-01-18Country : Hungary Latest Date for Comments : 2014-03-18Project ID : 20135115/0001 Project EstablishedICS : 55.120National Ref :Title : Autosiphon apparatus. Part 5: Autosíphon cartridges


Subsector : S09 Registration Date : 2013-12-18Organization : MSZT Draft Issue Date : 2014-01-18Country : Hungary Latest Date for Comments : 2014-03-18Project ID : 20135116/0001 Project EstablishedICS : 55.120National Ref :Title : Soda water bottle

Relatedness :National : REV/AMD MSZ 8078

Subsector : S09 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042258/0001 Project EstablishedICS :National Ref : PNE 27905Title : Bioassay for the characterization of the ecotoxicity of oil pollution response products by

the bioluminescent bacterium Vibrio fischeriScope : This standard describes procedures for obtaining laboratory data concerning the acute

toxicity of oil pollution response products such as dispersants, bioremediation agents and sorbents released into marine waters. Acute toxicity is measured by exposing Vibrio fischeri to a series of product concentrations under controlled conditions.


Subsector : S09 Registration Date : 2014-12-30Organization : AENORCountry : Spain

Page 65

Project ID : P0042259/0001 Project EstablishedICS :National Ref : PNE 27906Title : Bioassay for the characterization of the ecotoxicity of dispersants by the crustacean

species Palaemon serratus or Palaemon elegansScope : This standard describes procedures for obtaining laboratory data concerning the acute

toxicity of dispersants released into marine waters. Acute toxicity is measured by exposing Palaemon serratus or Palaemon elegans to a series of dispersant concentrations under controlled conditions.


Subsector : S09 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042260/0001 Project EstablishedICS :National Ref : PNE 27907Title : Bioassay for the characterization of the ecotoxicity of dispersants by the marine rotifer

Brachionus plicatilisScope : This standard describes procedures for obtaining laboratory data concerning the acute

toxicity of o dispersants released into marine waters. Acute toxicity is measured by exposing Brachionus plicatilis to a series of dispersant concentrations under controlled conditions.



Subsector S16: AIDS FOR THE DISABLED

Subsector : S16 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026007/0001 Project EstablishedICS : 03.120.10, 11.180.10National Ref : ONR 111107-6Title : Quality management for supply with medical devices for rehabilitation - Part 6: Walking

aids - Selection and adaptationScope : This ONR is the sixth part of a serie of ONR. It stipulates minimum standards for the

selection and adaptation of walking aids for an individual user. It is used when supplying a user who is not totally unable to walk with the appropriate walking aid. This includes walking aids to learn and train the walking process. Machines that initiate and perform the walking process are not included.



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2013-12-18Organization : DIN

Page 66

Country : GermanyProject ID : 08000206/0001 Project EstablishedICS :National Ref : 08000206Title : Special radiotherapy equipments - Part 20: Proton therapy - Rules for construction of

structural radiation protection


Subsector : S99 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185194/0001 Project EstablishedICS :National Ref : PR NF X30-500Title : complement of EN ISO 23907


Subsector : S99 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185255/0001 Project EstablishedICS :National Ref : PR NF S97-160-4Title : External orthoses - Part 4 : cervical orthosis : durability tests


Subsector : S99 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185256/0001 Project EstablishedICS :National Ref : PR NF S97-160-3Title : External orthoses - Part 3 : leg and ankle orthosis : durability tests


Subsector : S99 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185257/0001 Project EstablishedICS :National Ref : PR NF S97-160-2Title : External orthoses - Part 2 : dorso-lombo-sacral and abdominal orthosis : durability tests

Relatedness :

Page 67

National : New


** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 69Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 13202546/0001 Project EstablishedICS :National Ref : 13202546Title : Replenishment with operating materials and disposal of fluid waste from seagoing

vessels - Part 1: Hose fittings for hose assemblies up to PN 10; Texte in German and English


Subsector : T01 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 13202547/0001 Project EstablishedICS :National Ref : 13202547Title : Replenishment with operating materials and disposal of fluid waste from seagoing

vessels - Part 2: Emergency release couplings up to PN 10; Text in German and English



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2013-12-02Organization : TSECountry : TurkeyProject ID : tst04771/0001 Project EstablishedICS : 29.100.20, 31.020National Ref :Title : Test Methods for Electrical and Electronic Compoonent Parts for Military Purpose, Test

Method for Resistance-Temperature CharacteristicScope : This standard covers the test method for resistance temperature characteristic in electrical

and electronic component parts for military purposes.

Relatedness :National : NewInternational : Modified MIL-STD-202 G Notice 1 Change 2:2013

Subsector : T02 Registration Date : 2013-12-02Organization : TSECountry : TurkeyProject ID : tst08160/0001 Project EstablishedICS : 49.040National Ref :Title : General requirements for aerospace bolts and nuts of tensile strength not exceeding

1250 N/mm2Scope : This standard covers the general requirements for aerospace baolts and nuts of tensile

stherngth not exceeding 1250 N/mmı

Page 70

Relatedness :National : NewEuropean : Modified BS 4A 100:2003

Subsector : T02 Registration Date : 2013-12-02Organization : TSECountry : TurkeyProject ID : tst08999/0001 Project EstablishedICS : 71.100.30, 95.020National Ref :Title : Propellant test methodsScope : This standard covers general test methods for solid propellants.

Relatedness :National : NewInternational : Modified MIL-STD 286C Notice 1 Change 2:2010


Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 05202583/0001 Project EstablishedICS : 43.040.10National Ref : DIN 72552-2Title : Terminal markings for vehicles - Part 2: Codes


Subsector : T03 Registration Date : 2013-12-18Organization : DINCountry : GermanyProject ID : 05202595/0001 Project EstablishedICS :National Ref : 05202595Title : Fuel hoses lines - functional requirements


Subsector : T03 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : tst00663/0001 Project EstablishedICS : 43.040.99National Ref :Title : Road Vehicles – Tyre chainsScope : This standard covers tyre chains for use on road vehicles.


Page 71

International : Modified JIS D 4241:2000


Relatedness :National : NewInternational : Modified UNORM V 5117:2007


Relatedness :National : NewInternational : Modified UNORM V 5119:2008 (STB'de 5197 olarak verilmiş, kontrol edelim)

Subsector : T03 Registration Date : 2013-12-04Organization : TSECountry : TurkeyProject ID : tst01405/0001 Project EstablishedICS : 01.040.43, 43.020National Ref :Title : Road Vehicles - Masses - VocabularyScope : This standard covers masses vocabulary for road vehicles.

Relatedness :National : NewInternational : Modified ISO 1176:1990

Subsector : T03 Registration Date : 2013-12-04Organization : TSECountry : TurkeyProject ID : tst04599/0001 Project EstablishedICS : 01.040.43, 43.040.40National Ref :Title : Road Vehicles- Braking of Automotive Vehicles and Their Trailers- VocabularyScope : This standard covers principal terms of braking and of braking equipment for motor

vehicles and their trailers.


Page 72

Subsector : T03 Registration Date : 2013-12-09Organization : TSECountry : TurkeyProject ID : tst05386/0001 Project EstablishedICS : 01.040.43, 43.020National Ref :Title : Road Vehicles-Collisions-TerminologyScope : This standard covers the terminology relating to collosions for road vehicles except

motorcycles.


Subsector : T03 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : tst06208/0001 Project EstablishedICS : 01.040.43, 43.140National Ref :Title : Road Vehicles-Weights of Mopeds and Motorcycles With two Wheels VocabularyScope : This standard covers vocabulary related to weights of mopeds and motorcycles with two

wheels.


Subsector : T03 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : tst07223/0001 Project EstablishedICS : 43.140National Ref :Title : Road Vehicles - Mopeds - Symbols for Control, Indicators and Tell - TalesScope : This standard covers symbols for control, indicators and tell-tales for mopeds.


Subsector : T03 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : tst08245/0001 Project EstablishedICS : 43.020National Ref :Title : Rood Vehicles-Measurement Techniques In Impact Tests-Optical InstrumentationScope : This standard covers performance criteria for an optical data channel used in impact tests

on road vehicles, when numerical time and space data are taken from the images.



Page 73Subsector T06: METAL AND PLASTIC CONTAINERS

Subsector : T06 Registration Date : 2014-12-30Organization : AENORCountry : SpainProject ID : P0042432/0001 Project EstablishedICS :National Ref : PNE 62423Title : Standardized Procedure for the performance evaluation of mobile systems used for

verification of tightness and in-tank leak detection in single-wall tanks and associated piping utilized for storage of liquid hydrocarbons

Scope : This standard establishes standardized procedures to evaluate the performance of mobile systems to be utilized for the verification of tightness and in-tank leak detection for storage tanks for liquid petroleum products under the conditions stated and taking into account the water table. It also includes standardized procedures to evaluate associated (connected) to the tank under test. This standard excludes explicitly any procedure to verify the tightness of any piping not associated to the tank under test



Subsector T07: GLASS CONTAINERS

Subsector : T07 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185488/0001 Project EstablishedICS :National Ref : PR NF H35-078Title : Bottling industry - Glass bottles - Containers for carbonated beverages - Mechanical

strength requirements


Subsector : T07 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185489/0001 Project EstablishedICS :National Ref : PR NF H35-027Title : Bottling industry - Port wine finish


Subsector : T07 Registration Date : 2013-12-26Organization : AFNORCountry : FranceProject ID : FA185490/0001 Project EstablishedICS :

Page 74

National Ref : PR NF H35-022Title : Bottling industry - Glass bottles - Glass finishes - 26 to 43 mm crown cord - Construction

of the external profile and of the «P» hooking point - Geometry and dimensions



Subsector T08: CRANES

Subsector : T08 Registration Date : 2014-12-30Organization : TSECountry : TurkeyProject ID : tst10116/0001 Project EstablishedICS : 53.020.20National Ref :Title : Cranes - Test Code and ProceduresScope : This standard specifies the tests and procedures to be applied for the following cranes:

Overhead travelling cranes, travelling bridge cranes, portal cranes, mobile cranes, tower cranes, railway cranes, cable cranes and others to be determined.



Subsector T10: FREIGHT CONTAINERS

Subsector : T10 Registration Date : 2013-12-04Organization : TSECountry : TurkeyProject ID : tst01357/0001 Project EstablishedICS : 01.040.55, 55.180.10National Ref :Title : Freight Containers TerminologyScope : This standard covers series-1 freight containers terminology.



Subsector T12: INDUSTRIAL TRUCKS

Subsector : T12 Registration Date : 2013-12-19Organization : ASICountry : AustriaProject ID : 00026031/0001 Project EstablishedICS : 53.060National Ref : ÖNORM M 9806Title : Industrial trucks - Prohibition, command and indication signs - Configuration and

dispositionScope : This ÖNORM specifies requirements for the configuration and disposition of prohibition,

command and indication signs for industrial trucks.

Page 75



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2013-12-11Organization : SIS Draft Issue Date : 2013-12-11Country : Sweden Latest Date for Comments : 2014-02-11Project ID : 00763525/0001 Project EstablishedICS :National Ref : 763525Title : Lift, Escalators and moving walks - INSTA accident recording system for Lifts (IRASL)

and Escalators and Moving walks (IAREW)Scope : This INSTA standard sets up a method of registration of data on user and worker incidents,

accidents and near accidents with lifts, lifting platforms, escalators, moving walks and similar in a uniform way of describing and recording data. NOTE In this standard incidents, accidents and near accidents are recorded as accidents. The method can assist member states to fulfill the requirement in EU regulation 765/2008 by implementing suitable measures to survey accidents and impact on health from products. By this method of registration it will be possible to compare and evaluate data on incidents, accidents and near accidents on lifting equipment as defined in this standard.



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2013-12-04Organization : AENORCountry : Spain Latest Date for Comments : 2014-01-13Project ID : P0041626/0003 Draft for public enquiryICS :National Ref : PNE 199071-5Title : Road traffic management equipment. Environmental sensors on roads. Atmospheric

sensors in roads. Part 5: Conservation and maintenanceScope : This standard defines the conservation and maintenance for atmospheric sensors to be

installed in roads

Relatedness :National : REV/AMD UNE 135441-5:2006

Subsector : T19 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042325/0001 Project EstablishedICS :National Ref : PNE 135312Title : Vertical signs. Fixing systems for metallic plates, signals and directional signs type

arrow. Characteristics and test methods.

Page 76

Scope : This standard revises the previous version defining the characteristics and tests methods for the fixing systems for vertical signs.


Subsector : T19 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042328/0001 Project EstablishedICS :National Ref : PNE 135313Title : Vertical signs. Plates of galvanized steel sheet. Characteristics and tests methodsScope : This standard specifies the characteristics and test methods for the galvanized steel sheet

plates used for the vertical signs.


Subsector : T19 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042329/0001 Project EstablishedICS :National Ref : PNE 135333Title : Vertical signs. Plates and sheet slats of the signs, side posters and directional panels

used for metallic and permanent signs. Materials. Tests for verification.Scope : This standard specifies the test methods to verify some essential requirements of the

vertical signs.


Subsector : T19 Registration Date : 2013-12-02Organization : AENORCountry : SpainProject ID : P0042330/0001 Project EstablishedICS :National Ref : PNE 135336Title : Vertical signs. Plates and sheet slats of the signs, side posters and directional panels

used for metallic temporary signs. Materials. Characteristics and test methods.Scope : This standard specifies the characteristics and test methods of the different elements that

vertical signs, side posters and directional signs used as temporary roadsigns are composed of.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR