Monthly Notifications Register - unmz.i-servis.infounmz.i-servis.info/cz/50/n/200807_register_IP729.pdf · B33 Building design 205 315; 325 B34 ... I40 Industrial piping networks

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CMC from 2008-07-01 to 2008-07-31

Register issued on : 2008-08-01

2007-10

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC reference reference

A01 Tourist services / 329

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180

A11 Security Services / CEN/BT/TF 167

A99 Undetermined / CEN/WS 002; CEN/WS 004

Sector B: Building and construction


B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 284; 288; 297; 340; 349

B03 Concrete 71 104; CEN/WS 003

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89

CEN/BT WG 173

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341

B15 Sanitary appliances / 163

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined /

Sector C: Chemicals, chemical engineering and food products


C01 Food products 34 174; 275; 302; 307; 327; 338; CEN/WS 008

C02 Paints and related products 35 139; 298

C03 Chemistry 47 317

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 /

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 /

C20 Explosives and firework / 212; 321

C99 Undetermined / /

Sector F: Fundamental standards


F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN WS 010

F08 Surfaces 57 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS EBES

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007

F16 Graphical symbols 145 /

F17 Administrative documents 154 /

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC CWG/QS

F21 Value analysis and project / 279 network

F22 Logistics / /

F23 Energy 203 /

F99 Undetermined / /

Sector H: Products for household and leisure use


H01 Cinematography 36 /

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 /

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / /

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117

H99 Undetermined / 299

Sector I: Mechanical engineering


I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits 3 /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 /

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; (including safety) 271, 337

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 /

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / /

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies / 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2

Sector M: Metallic materials


M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1; ECISS/TC 2

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30 CEN/BT/TF 196

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


N01 Paper and board 6 172

N02 Solid fuels 27 335

N03 Petroleum products 28 19; 336; 343

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238

N22 Feather and related materials / 222

N99 Undetermined / /

Sector S: Health, environment and medical equipment


S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001

S10 Surgical implants 150 285; CEN/CLC JWG/AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and 200 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316 CEN/CLC/TC 3

S22 Energy saving / CEN/WS 005

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 /

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 /

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S99 Undetermined / 205; CEN/BT/TF 127

Sector T: Transport, mechanical handling and packaging


T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS

T03 Road vehicles 22 301; 326

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC WG/FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / /

Sector Z: Information technology

Subsector Title ISO/TC CEN/TC

Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CENELEC - ETSI

Z03 Common O.S.I. activities / CEN/CENELEC - EWOS

Z99 Undetermined / CEN/CENELEC CEN/WS DFA CEN/WS DIR CEN/WS EBES CEN/WS ECH CEN/WS ECO CEN/ES EFI CEN/WS ESI CEN/WS FAS CEN/WS FUN CEN/WS IEC CEN/WS JXF CEN/WS LCT CEN/WS LTS CEN/WS MDC CEN/WS MET CEN/WS POR CEN/WS URI CEN/WS XFS CEN/TC 353




Sector B : BUILDING AND CONSTRUCTION


Page 3Subsector B01: FIRE PROTECTION.

Subsector : B01 Registration Date : 2008-07-03Organization : BSICountry : United KingdomProject ID : 00801891/0001 Project EstablishedICS :

National Ref : BS 7863Title : Recommendations for colour coding to indicate the extinguishing media contained in

portable fire extinguishers

Relatedness :National : New


National Ref : BS 6643-1Title : Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire

extinguishers'). Part 1. Specification for procedure and materials



National Ref : BS 6643-2Title : Recharging fire extinguishers (manufactured to BS 5423 'Specification for portable fire

extinguishers'). Part 2. Specification for powder refill charges


Subsector : B01 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001381/0001 Project EstablishedICS : 13.220.50

National Ref : NPR 6091:2008 Ontw. nlTitle : Resistance against external fire spreadScope : This code of practice give guidelines and calculations for a simple estimation of

transmission of fire by flying brand. This code of practice is limited to flying brand from openings in facades and roofs to opening in facades in other fire compartments in the same or another building.


Page 4** End of Subsector **

Subsector B02: STRUCTURES.

Subsector : B02 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 00514470/0001 Project EstablishedICS :

National Ref : 00514470Title : Waterproofing of roofs - Sealings for non-utilized roofs - Part 3: Design, handling of

materials, execution of sealings



National Ref : 00514471Title : Floor screeds in building construction - Part 1: General requirements, testing and

construction



National Ref : 00514472Title : Floor screeds in building construction - Part 2: Floor screeds and heating floor screeds on

insulation layers



National Ref : 00514494Title : German construction contract procedures - Part C: General technical specifications for

building works - Automation installations in buildings


Subsector : B02 Registration Date : 2008-07-14

Page 5Organization : DINCountry : GermanyProject ID : 00514495/0001 Project EstablishedICS :


building works - Asphalt flooring works




building works - Floor screed works




building works - Earthworks




building works - Construction works for traffic lines, stone and tile pavements without binders, kerbs


Page 6Subsector : B02 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 00514499/0001 Project EstablishedICS :

National Ref : 00514499Title : Contract procedures for building works - Part C: General technical specifications for

building works; pipe drilling works




building works - Air-placed concrete works



National Ref : NEN 6700:2005/A1:2008 Concept nlTitle : Technical principles for building structures - TGB 1990 - General principlesScope : This amendment clarifies ambiguities by distinguishing notes and normative text.



National Ref : NEN 6702:2007/A1:2008 Concept nlTitle : Technical principles for building structures - TGB 1990 - Loadings and deformationsScope : This document amends NEN 6702:2007.


Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06Project ID : BE609900/0001 Project Established

Page 7ICS : 13.220.50, 91.010.30, 91.080.10

National Ref : NBN EN 1993-1-2-ANB:2008,ed1Title : Eurocode 3 - Design of steel structures - Part 1-2:General rules - Structural fire design -

National annex

Relatedness :National : REV/AMD NBN EN 1993-1-2:2005European : Not Equivalent to EN 1993-1-2:2005

Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06Project ID : BE609901/0001 Project EstablishedICS : 91.010.30, 91.080.10

National Ref : NBN EN 1993-1-12 ANB:2008, ed1Title : Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN

1993 up to steel grades S 700 - National annex


Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06Project ID : BE609905/0001 Project EstablishedICS : 91.010.30

National Ref : NBN EN 1993-1-8-ANB:2008,ed1Title : Eurocode 3 - Design of steel structures - Part 1-8:Design of joints - National annex



National Ref : NBN EN 1993-1-9 ANB:2008, ed1Title : Eurocode 3 : Design of steel structures - Part 1-9: Fatigue-National annex


Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06

Project ID : BE609907/0001Project

Established

ICS :13.220.50, 91.010.30, 91.080.10, 91.080.40

National Ref : NBN EN 1994-1-2-ANB:2008,ed1Title : Eurocode 4 - Design of composite steel and concrete structures - Part 1-2:General rules -

Page 8

Title : Structural fire design - National annex


Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06Project ID : BE609908/0001 Project EstablishedICS : 91.010.30, 91.080.10, 93.040

National Ref : NBN EN 1993-1-11-ANB:2008,ed1Title : Eurocode 3 - Design of steel structures - Part 1-11 - Design of structures with tension

components - National annex



National Ref : NBN EN 1993-1-10-ANB:2008,ed1Title : Eurocode 3 - Design of steel structures - Part 1-10:Material toughness and through-

thickness properties - National annex


Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06Project ID : BE609910/0001 Project EstablishedICS : 91.010.30, 91.080.20

National Ref : NBN EN 1995-1-1-ANB:2008, ed1Title : Eurocode 5 : Design of timber structures - Part 1-1: General - Common rules and rules for

buildings - National annex


Subsector : B02 Registration Date : 2008-07-14Organization : NBN Draft Issue Date : 2008-07-07Country : Belgium Latest Date for Comments : 2008-12-06Project ID : BE609912/0001 Project EstablishedICS : 91.010.30, 91.080.20, 93.040

National Ref : NBN EN 1995-2-ANB:2008, ed1Title : Eurocode 5: Design of timber structures - Part 2: Bridges - National annex

Relatedness :National : REV/AMD NBN EN 1995-2:2005European : Not Equivalent to EN 1995-2:2005

Page 9Subsector : B02 Registration Date : 2008-07-29Organization : AFNORCountry : FranceProject ID : FA160352/0001 Project EstablishedICS :

National Ref : PR NF P06-014/A2Title : Earthquake resistant construction rules - Earthquake resistant construction of individual

houses and related buildings - 1992 revised PS-MI 89 rules - Field of application - Design - Construction

Relatedness :National : REV/AMD NF P06-014:199503 (P06-014), NF P06-014/A1:200102 (P06-014/A1)

Subsector : B02 Registration Date : 2008-07-01Organization : AENORCountry : SpainProject ID : P0031711/0001 Project EstablishedICS :

National Ref : PNE 123001Title : Calculation and design of chimneys. Application guideScope : This standard defines the calculation of metal chimneys not covered by the European

standards and some design criteria. It also includes a guidance of application of European standards. It revises a previous version.

Relatedness :

National :REV/AMD UNE 123001:2005, UNE 123001:2005/1M:2006, UNE 123001:2005/1M:2006 ERRATUM:2006

** End of Subsector **

Subsector B03: CONCRETE.

Subsector : B03 Registration Date : 2008-07-29Organization : AFNORCountry : FranceProject ID : FA160729/0001 Project EstablishedICS :

National Ref : PR NF P18-459Title : Concrete - Testing hardened concrete - Testing porosity and density


Subsector : B03 Registration Date : 2008-07-01Organization : AENORCountry : SpainProject ID : P0031710/0001 Project EstablishedICS :

National Ref : PNE 83151-2 INTitle : Concreting in special climatic conditions. Part 2: Concreting in drying conditions.Scope : This report includes the special procedures to follow and the necessary precautions when

concreting in climatic drying conditions.

Relatedness :

Page 10

National : New


Subsector B08: DOORS AND WINDOWS.

Subsector : B08 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001392/0001 Project EstablishedICS : 81.040.20, 91.060.50

National Ref : NEN 3576:2008 Concept nlTitle : Glazing of windowframes, windows and doors - Functional requirementsScope : This standard gives functional specifications and testing methods for glazing of window

frames, windows and doors for facades. This standard is applicable to vertical glazing to a level up to a maximum of 40 m.



Subsector B14: GEOTECHNICS.

Subsector : B14 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 00512831/0001 Draft for public enquiryICS : 93.020

National Ref : DIN 4107-1Title : Geotechnical measurements - Part 1: Principles



Subsector B20: DRAINAGE EQUIPMENT.


National Ref : BS 8525-1Title : Greywater treatment systems. Part 1. Code of practice for installation




Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT.

Subsector : B25 Registration Date : 2008-07-25Organization : UNICountry : ItalyProject ID : 01089370/0001 Project EstablishedICS : 91.140.40

National Ref : E01089370Title : Gas plants for domestic use fed by network distribution - Terms and definitionsScope : The Standard specifies the terms and definitions of gas plants for domestic use fed by

network distribution.

Relatedness :National : REV/AMD UNI 7128:1990

Subsector : B25 Registration Date : 2008-07-09Organization : AENORCountry : Spain Latest Date for Comments : 2008-08-08Project ID : P0019050/0002 Draft for public enquiryICS :

National Ref : PNE 60404-3Title : Gaseous fuels. Regulation pressure and /or measurement packages with a maximum

operating pressure up to 5 bar. Part 3: Packages to built in, attach or place in enclosures with an equivalent nominal volume of flow from 100 m3(n)/h to 250m3(n)/h of natural gas.

Scope : This standard applies to packages to built in, attach or place in enclosures with an equivalent nominal volume of flow from 100 m3(n)/h to 250m3(n)/h of natural gas.



Subsector B26: ROAD BUILDING AND MAINTENANCE.

Subsector : B26 Registration Date : 2008-07-10Organization : PKNCountry : PolandProject ID : 02750089/0001 Project EstablishedICS : 73.100.10

National Ref : prPN-G-15011Title : Roadway support with susceptible frames made of special section - Clamps - RequirementsScope : Specifies requirements of clamps for roadway support with susceptible frames made of

special section


Subsector : B26 Registration Date : 2008-07-31Organization : CNI Draft Issue Date : 2008-05-31Country : Czech Republic Latest Date for Comments : 2008-09-01Project ID : 73224306/0001 Draft for public enquiryICS :

Page 12

National Ref : 73/2243/06Title : Terminology of road communications - Part 1: Basic terminologyScope : This standard includes terms and definitions specific for the sector of roads, highways,

village and tertiary roads. Goal of the revision is to update obsolete terminology standards and develop separate part that will include basic terms and definitions

Relatedness :National : REV/AMD CSN 73 6100:1983

National Ref : BS 8525-2Title : Greywater treatment systems. Part 2. Specification for type testing treatment equipment


Subsector : B26 Registration Date : 2008-07-03Organization : SNV Draft Issue Date : 2008-07-02Country : Switzerland Latest Date for Comments : 2008-08-20Project ID : CH080021/0001 Draft for public enquiryICS : 03.220.20

National Ref : SN 641828Title : Cost benefit analyses in road traffic - external costs



National Ref : SN 640070Title : Foot Traffic - Principles



National Ref : SN 670090Title : Geosynthetics, basic standard



Subsector B27: WATERPROOFING MATERIALS.

Subsector : B27 Registration Date : 2008-07-24Organization : SNV Draft Issue Date : 2008-07-11

Page 13Country : Switzerland Latest Date for Comments : 2008-09-15

Project ID : CH080023/0001Draft for public

enquiryICS : 91.120.30

National Ref : SIA 282Title : Liquid sealings - product and material testing, attestation of conformity



Subsector B99: UNDETERMINED.


National Ref : NEN 7170:2008 Concept nlTitle : Structuring underground networks - CriteriaScope : Structuring underground networks is an interactive proces between parties. Bottlenecks can

arise during this proces. Participating parties have to solve these bottlenecks together. The proces is described in order to contribute to a good development. A several stadia are distinguished.



National Ref : NEN 7171:2008 Concept nlTitle : Structuring underground networks - ProcessScope : This standard gives criteria for the organization of underground networks in public ground

near new estate. This standard is normative for new estate situations. The criteria for organization can also be used for existing works or addtion of works.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 15Subsector C01: Food products

Subsector : C01 Registration Date : 2008-07-24Organization : NSAI Draft Issue Date : 2008-07-24Country : Ireland Latest Date for Comments : 2008-07-26Project ID : 01078863/0001 Project EstablishedICS :

National Ref : I.S. 350:Title : Requirements for the development of food quality assurance schemes.Scope : The Scope of this Irish Standard is to provide a framework for the development of food

quality assurance schemes for use in conformity assessment.

Relatedness :National : REV/AMD I.S. 350

Subsector : C01 Registration Date : 2008-07-10Organization : LST Draft Issue Date : 2008-07-15Country : Lithuania Latest Date for Comments : 2008-09-15Project ID : 01100007/0001 Draft for public enquiryICS : 67.160.10

National Ref :Title : Beer. Determination of alcohol content, real and original extractScope : The standard specifies methods for the determination of alcohol content, real and original

extract in beer.


Subsector : C01 Registration Date : 2008-07-10Organization : LST Draft Issue Date : 2008-07-15Country : Lithuania Latest Date for Comments : 2008-09-15Project ID : 01500005/0001 Draft for public enquiryICS : 67.060

National Ref :Title : Oats - Requirements for purchase and suplpyScope : The standard specifies requirements for oats purchased and supplied for food and feeding

stuffs



National Ref :Title : Maize- Requirements for purchase and supplyScope : The standard specifies requirements for maize purchased and supplied for food and

feeding stuffs


Page 16


National Ref :Title : Peas - Requirements for purchase and supplyScope : The standard specifies requirements for peas purchased and supllied for food and feeding

stuffs



National Ref :Title : Triticale - Requirements for purchase and supplyScope : The standard specifies requirements for triticale purchased and supplied for food and

feeding stuffs



National Ref :Title : Barley - Requirements for purchase and supplyScope : This standard specifies requirements for barley purchased and supplied for food and

feeding stuffs



National Ref :Title : Buckwheat - Requirements for purchase and supplyScope : The standard specifies requirements for purchased and supplied buckweat


Page 17


National Ref :Title : Rye- Requirements for purchase and supplyScope : The standard specifies requirements for purchased and supplied rye for food and feeding

stuffs



National Ref :Title : Wheat - Requirements for purchase and supplyScope : This standard specifies requirements for wheat purchased and supplied for food and

feeding stuffs


Subsector : C01 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001391/0001 Project EstablishedICS : 07.100.30, 67.100.01

National Ref : NEN 6877:2008 Concept nlTitle : Milk and milk products - Detection of spores of butyric acid bacteria and determination of

the content of spores of butyric acid bacteria by MPN techniqueScope : This standard describes a method for the detection of spores of butyric acid bacteria in

milk and milkproducts. The results of this method give an indication for the spurs of Clostridium tyrobutyricum that can cause butyric acid fermentation in cheese.


Subsector : C01 Registration Date : 2008-07-29Organization : AFNORCountry : FranceProject ID : FA160464/0001 Project EstablishedICS :

National Ref : PR NF V08-061Title : Microbiologye of food and animal feeding stuffs - Anaerobic enumeration of sulfito-

reducing bacteria by colony count technique at 46°C - Routine method

Page 18

Relatedness :National : REV/AMD XP V08-061:200505 (V08-061)


National Ref : PR NF V08-060Title : Microbiology of food and animal feeding stuffs - Enumeration of thermotolerant coliforms

by colony-count technique at 44°C - Routine method

Relatedness :National : REV/AMD NF V08-060:199603 (V08-060)


National Ref : PR NFV08-050Title : Microbiology of food and animal feeding stuffs - Enumeration of coliforms by colony-count

technique at 30°C - Routine method

Relatedness :National : REV/AMD NF V08-050:199902 (V08-050)


Subsector C02: PAINTS AND RELATED PRODUCTS.


National Ref : PR NF T34-554-1Title : Paints and varnishes - Anticorrosion paint systems - Stability in the time of the colorimetric

properties of a finishing coat for a metallic structure - Part 1 : criterias of requirements

Relatedness :National : REV/AMD NF T34-554-1:200103 (T34-554-1)


Subsector C03: CHEMISTRY.

Subsector : C03 Registration Date : 2008-07-01Organization : AENORCountry : SpainProject ID : P0031634/0001 Project EstablishedICS :

Page 19

National Ref : PNE 84727Title : Cosmetic raw materials. Cetearyl glucoside.Scope : This standard describes the specifications required by cetearyl glucoside used in cosmetic

products.



Subsector C04: LABORATORY GLASSWARE.

Subsector : C04 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 05500106/0001 Project EstablishedICS :

National Ref : 05500106Title : Laboratory glassware - Three-neck bottles (Woulff bottles)



Subsector C06: ESSENTIAL OILS.

Subsector : C06 Registration Date : 2008-07-09Organization : AENORCountry : Spain Latest Date for Comments : 2008-08-18Project ID : P0030932/0002 Draft for public enquiryICS :

National Ref : PNE 84713Title : Cosmetic raw materials. Ethylenediamino tetracetic acid and its salts.Scope : This standard describes the physic-chemical characteristics of ethylenediamino tetracetic

acid and its salts for cosmetic use.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 21Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2008-07-03Organization : BSICountry : United KingdomProject ID : 00801964/0001 Project EstablishedICS :

National Ref : BS XXXXXTitle : Specification for submission of digital evidence for examination coursework


Subsector : F07 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 00900051/0001 Project EstablishedICS :

National Ref : 00900051Title : Information and documentation - Transliteration of the Armenian alphabet



National Ref : 00900052Title : Information and documentation - Transliteration of the Georgian alphabet



Subsector F16: GRAPHICAL SYMBOLS.

Subsector : F16 (Secondary Subsector)

Registration Date : 2008-07-03

Organization : BSICountry : United KingdomProject ID : 00801891/0001 Project EstablishedICS :

National Ref : BS 7863Title : Recommendations for colour coding to indicate the extinguishing media contained in

portable fire extinguishers



Page 22Subsector F99: UNDETERMINED.


National Ref : 15201858Title : Manufacturing processes removal operations - Classification, subdivision, terms and

definitions


Subsector : F99 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001386/0001 Project EstablishedICS : 03.100.01

National Ref : NEN 7131:2008 Concept enTitle : Security, preparedness and continuity management systems - Requirements with guidance

for useScope : This standard of best practices specifies requirements for a security, preparedness and

continuity (SPC) management system to anable an organization to develop and implement a policy, objectives and programms taking into account legal requirements and other requirements to which the organization subscribes and information about significant hazards and threats that might impact it , and its stakeholders, critical assets (physical, intangible, environmental and human). It applies to risks and/or their impacts that the organization identifies as those it can control and those which it can influence or reduce their impact.


Subsector : F99 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001387/0001 Project EstablishedICS : 03.100.01

National Ref : NEN 7132:2008 Concept enTitle : Guidelines for auditing security, preparedness and continuity managementsystems with

guidance for applicationScope : This Guidance Standard provides guidance on the principles of auditing, managing audit

programmes, conducting audits of security, preparedness, and continuity management system, as well as guidance on the competence of security, preparedness, continuity, and emergency management system auditors. It is applicable to all organizations needing to conduct internal or external audits of security, preparedness, and continuity management systems or to manage an audit programme. The application of this Guidance Standard to other types of audit is possible in principle, provided that special consideration is paid to identifying the competence needed by the audit team members in such cases.



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 25Subsector H05: OIL AND GAS BURNERS.

Subsector : H05 Registration Date : 2008-07-29Organization : AFNORCountry : FranceProject ID : FA160728/0001 Project EstablishedICS :

National Ref : PR NF D35-386Title : Intermittent operating appliances for domestic use fired by fuel on base of ethanol



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 27Subsector I02: FASTENERS.

Subsector : I02 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 15201849/0001 Project EstablishedICS :

National Ref : 15201849Title : Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external

measurements; limits for error



Subsector I06: PRESSURE VESSELS.

Subsector : I06 Registration Date : 2008-07-30Organization : CNI Draft Issue Date : 2008-06-30Country : Czech Republic Latest Date for Comments : 2008-07-01Project ID : 69039308/0001 Draft for public enquiryICS : 23.020.30

National Ref : 69/0993/08Title : Operation of stationary pressure vessels

Relatedness :National : REV/AMD Amendment 4 of CSN 69 0012


Subsector I09: SMALL TOOLS.

Subsector : I09 Registration Date : 2008-07-01Organization : AENORCountry : SpainProject ID : P0031489/0001 Project EstablishedICS :

National Ref : PNE 16534-1Title : Hacksaw blades. Part 1: Dimensions for hand blades.Scope : This standard specifies the dimensions of hand hacksaw blades

Relatedness :National : REV/AMD UNE 16534-1:1998


National Ref : PNE 16591-2Title : Mason picks, picks and similar tools. Part 2: Mason picks. Technical specifications, head

geometry, types and dimensions.Scope : This standard specifies head geometry, types and dimensions of mason picks.

Page 28



National Ref : PNE 16591-3Title : Mason picks, picks and similar tools. Part 3: Picks. Technical specifications, head geometry,

types and dimensions.Scope : This standard specifies head geometry, types and dimensions of picks.



National Ref : PNE 16536Title : Pliers and nippers. Construction worker's pincers. Dimensions and test values.Scope : This standard fixes the main dimensions and test valves in order to verify their ability. It

collects and construction worker's pincers corresponding to number 306 of UNE Standard 16524.

Relatedness :National : REV/AMD UNE 16536:1998International : Not Equivalent to ISO 9242:1988


Subsector I11: MACHINE TOOLS.

Subsector : I11 Registration Date : 2008-07-09Organization : AENORCountry : Spain Latest Date for Comments : 2008-08-08Project ID : P0028010/0002 Draft for public enquiryICS :

National Ref : PNE 15330Title : Underfloor wheel lathe for the reprofiling of railway wheels. Test conditions. Testing of the

accuracy.Scope : This standard specifies the reprofiling of railway wheels by underfloor wheel lathe and the

testing of the accuracy.

Relatedness :National : REV/AMD UNE 15330:2004


Subsector I18: MINING.

Subsector : I18 Registration Date : 2008-07-01

Page 29Organization : AENORCountry : SpainProject ID : P0030925/0001 Project EstablishedICS :

National Ref : PNE 22470Title : Sustainable mining management indicators.Scope : This draft standard establishes indicators to be considered in a sustainable mining

management.



Subsector I99: UNDETERMINED.

Subsector : I99 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 06002237/0001 Project EstablishedICS :

National Ref : 06002237Title : Interference fits Part 2 - Calculation and design rules for cone-shaped, self-locking press fits



** End of Sector **




Sector M : METALLIC MATERIALS


Page 31Subsector M01: STEEL.

Subsector : M01 Registration Date : 2008-07-10Organization : PKNCountry : PolandProject ID : 01460039/0001 Project EstablishedICS : 77.140.70

National Ref : prPN-H-93419:2006/Az1Title : Hot-rolled parallel-flange steel -- DimensionsScope : Changes IPE...AA index into IPE...A

Relatedness :National : REV/AMD PN-H-93419:2006

Subsector : M01 Registration Date : 2008-07-01Organization : AENORCountry : SpainProject ID : P0031666/0001 Project EstablishedICS :

National Ref : PNE 36523Title : Steel products. Section UPE. Dimensions.Scope : This standard specifies the dimensions of hot rolled steel section UPE produced with steel

grades in accordance with UNE-EN 10025. Tolerances on shape, dimensions and mass are specified in UNE-EN 10279



Subsector M08: LIGHT ALLOYS.

Subsector : M08 Registration Date : 2008-07-25Organization : UNICountry : ItalyProject ID : 12043440/0001 Project EstablishedICS : 77.120.50

National Ref : E12043440Title : Titanium and titanium alloys - Surface treatments - Tests and requirementsScope : This Standard specifies criteria and procedures of treatments and tests to be performed

with relevant acceptability requirements.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 33Subsector N01: PAPER AND BOARD.

Subsector : N01 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 06232925/0001 Project EstablishedICS :

National Ref : 06232925Title : Testing of paper and board; determination of the waterrepellent properties



National Ref : 06232926Title : Testing of board; short span test of solid board



Subsector N03: PETROLEUM PRODUCTS.


National Ref : 06232940Title : Liquid petroleum products - Determination of storage stability of fuel oil EL



National Ref : 06232947Title : Testing of lubricants - Determination of elements content in additives, wear and other

contaminations - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF)


Subsector : N03 Registration Date : 2008-07-29Organization : AFNORCountry : France

Page 34Project ID : FA160567/0001 Project EstablishedICS :

National Ref : PR FD T66-029Title : Hydrocarbon binders - Pure tars - Determination of naphtalene content

Relatedness :National : REV/AMD NF T66-029:199601 (T66-029)


Subsector N09: PLASTICS.

Subsector : N09 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 00802076/0001 Draft for public enquiryICS : 53.040.20

National Ref : DIN 22100-1Title : Synthetic materials for use in underground mines - Part 1: Conveyor belts - Hygienic

requirements, testing, marking



National Ref : 00802087Title : Articles and materials from synthetic for use in underground mines - Part 3: Spiral air ducts

- Safety requirements, testing, marking



National Ref : 00802088Title : Articles and materials from synthetic for use in underground mines - Part 4: Flat air ducts -

Safety requirements, testing, marking



Page 35Subsector : N09 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 00802090/0001 Project EstablishedICS :

National Ref : 00802090Title : Articles and materials from synthetic for use in underground mines - Part 6: Sheeting,

coated/uncoated tissue, brattice materials and lagging mats - Safety requirements, testing, marking



National Ref : 05401063Title : Plastics - Extruded hoses of plasticized polyvinylchloride (PVC-P) - Permissable deviations

for dimensions for which tolerances are not indicated



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 37Subsector S01: ACOUSTICS AND SOUND INSULATION.

Subsector : S01 Registration Date : 2008-07-29Organization : AFNORCountry : FranceProject ID : FA160350/0001 Project EstablishedICS :

National Ref : PR NF S31-010/A1Title : Acoustics - Environmental noise characterization and measurement - Special measuring

methods

Relatedness :National : REV/AMD NF S31-010:199612 (S31-010)


Subsector S05: DENTISTRY.

Subsector : S05 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 01402054/0001 Project EstablishedICS :

National Ref : 01402054Title : Dentistry - Terminology of process series for CAD/CAM-systems



Subsector S08: AIR QUALITY.

Subsector : S08 Registration Date : 2008-07-10Organization : PKNCountry : PolandProject ID : 15900170/0001 Project EstablishedICS : 13.040.30

National Ref : prPN-Z-04381Title : Air purity protection -- Determination of propene in workplaces by gas chromatographyScope : Gives the method consisting in collection of air samples in a special plastic material bags (or

glass pipette) and direct gas chromatographic determination with flame-ionization detection. The lowest concentration of propene which can be determined by this method is 300 mg/m3



National Ref : prPN-Z-04379Title : Air purity protection -- Determination of paraffin in workplaces by gas chromatography

Page 38

Scope : Gives the method consisting in the collection of paraffin on glass fibre filter, extraction with carbon disulfide and analysis of the obtained solution by gas chromatography. The lowest possible concentration of paraffin, that can be determined by this method is 0,4 mg/m3


National Ref : 00802089Title : Articles and materials from synthetic for use in underground mines - Part 5: Tubes, tube

isolations and hoses - Safety requirements, testing, marking



National Ref : prPN-Z-04052-4Title : Air purity protection -- Tests for chlorophenols -- Part 4: Determination of 4-chlorophenol

in workplaces by high performance liquid chromatographyScope : Gives the method consisting in the collection of 4-chlorophenol on silica gel, ultrasonic

extraction of the compound with acetonitryle and analysis of the obtained extract by high performance liquid chromatography. The lowest concentration of 4-chlorophenol which can be determined by this method is 0,025 mg/m3



National Ref : prPN-Z-04108-6:2006/Az1Title : Air purity protection -- Tests for content of oils -- Part 6: Determination of mineral oil

(liquid phase of aerosol) in workplaces by absorption spectrometry method in ultra-violetScope : The parameters of method have been changed in Clauses 7 and 10, so that the lowest

concentration of mineral oils which can be determined by this method was 0,5 mg/m3

Relatedness :National : REV/AMD PN-Z-04108-6:2006


National Ref : prPN-Z-04417Title : Air purity protection -- Determination of n-pentanal in workplaces by high performance

liquid chromatography

Page 39

Scope : Gives the method consisting in the collection of n-pentanal on silica gel coated with dinitrophenylhydrazine, extraction of the formed derivative with acetonitrile and analysis of the obtained extract by high performance liquid chromatography. The lowest concentration of n-pentanal which can be determined by this method is 2 mg/m3



National Ref : prPN-Z-04393Title : Air purity protection -- Determination of 3a,4,7,7a-tetrahydro-4,7-methanoindene in

workplaces by gas chromatographyScope : Gives the method consisting in the adsorption vapours of 3a,4,7,7a-tetrahydro-4,7-

methanoindene on activated charcoal, desorption of the compound by carbon disulphide and analysis of the obtained solution by gas chromatography. The lowest concentration of 3a,4,7,7a-tetrahydro-4,7-methanoindene which can be determined by this method is 1,25 mg/m3



National Ref : prPN-Z-04388Title : Air purity protection -- Determination of isooctane-1-ol in workplaces by gas

chromatographyScope : Gives the method consisting in the adsorption of isooctane-1-ol vapour on activated

charcoal, desorption of the compound with solution of carbon disulphide and dimethylformamide and analysis of the obtained solution by gas chromatography. The lowest concentration of isooctane-1-ol which can be determined by this method is 22 mg/m3



National Ref : prPN-Z-04376Title : Air purity protection -- Determination of isopentane in workplaces by gas chromatographyScope : Gives the method consisting in the adsorption of isopentane vapour on activated charcoal

desorption of the compound by carbon disulphide and analysis of the obtained solution by gas chromatography. The lowest possible concentration of isopentane witch can be

Page 40

Scope : determined by this method is 150 mg/m3



National Ref : prPN-Z-04396Title : Air purity protection -- Determination of 4,4'-methylenedianiline in workplaces by high

performance liquid chromatographyScope : Gives the method consisting in passing the analysed air through a polipropylene filter,

extraction with chloroform and methanol mixture and determination of the created compound in the obtained solution by high performance liquid chromatography. The lowest concentration of 4,4'-methylenedianiline which can be determined by this method is 0,02 mg/m3



National Ref : prPN-Z-04409Title : Air purity protection - Determination of buthyl benzyl phthalate in workplaces by gas

chromatographyScope : Gives the method consisting in passing the analysed air through a glass fibre filter,

extraction with carbon disulfide and analysis of the obtained solution by gas chromatography. The lowest concentration of buthyl benzyl phthalate which can be determined by this method is 0,5 mg/m3



National Ref : prPN-Z-04414Title : Air purity protection - Determination of dimethyl ether in workplaces by gas

chromatographyScope : Gives the method consisting in the collection of air samples in a special plastic material bag

(or glass pipette) and direct gas chromatographic determination with flame-ionization detection. The lowest concentration of dimethyl ether which can be determined by this method is 100 mg/m3

Relatedness :

Page 41

National : New


National Ref : prPN-Z-04045-14Title : Air purity protection -- Tests for content of aldehydes -- Part 14: Determination of n-

hexanal in workplaces by high performance liquid chromatographyScope : Gives the method consisting in the collection of n-hexanal on glass filter coated with

dinitrophenylhydrazine, extraction of the formed derivative with acetonitrile and analysis of the obtained extract by high performance liquid chromatography. The lowest concentration of n-hexanal which can be determined by this method is 4 mg/m3



Subsector S09: WATER QUALITY AND WATER SUPPLY.

Subsector : S09 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001382/0001 Project EstablishedICS : 13.080.05

National Ref : NVN 5720:2000/A2:2008 Concept nlTitle : Soil - Sediment - Investigation for exploratory surveyScope : Amendment to NVN 5720:2000


Subsector : S09 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001388/0001 Project EstablishedICS : 07.100.20, 13.060.70

National Ref : NEN 6253:2008 Concept nlTitle : Water - Detection and enumeration of Legionella pneumophilia - Method using selective

culture mediaScope : This standard describes methods for the establishment and quantification of Legionella

pneumophilia in water using selective culture media. This standard is applicable to bacteriological examination of all sorts of water.


Subsector : S09 Registration Date : 2008-07-11Organization : NENCountry : NetherlandsProject ID : 50001389/0001 Project Established

Page 42ICS : 07.100.20, 13.060.70

National Ref : NEN 6254:2008 Concept nlTitle : Water - Detection and quantification of Legionella pneumophilia - Method using

polymerase chain reaction (PCR)Scope : This standard describes a method for the establishment and quantification of Legionella

pneumophilia in water using polymerase chain reaction (PCR). This standard is applicable to all sorts of water unless the nature or the content of suspended particulate matter and/or attendant flora disrupts the determination.


Subsector : S09 Registration Date : 2008-07-29Organization : AFNORCountry : FranceProject ID : FA160221/0001 Project EstablishedICS :

National Ref : PR XP T90-210Title : Water quality - Protocol for the intial method performance assesment in a laboratory

Relatedness :National : REV/AMD XP T90-210:199912 (T90-210)


Subsector S15: SURGICAL INSTRUMENTS.


National Ref : 02702125Title : Medical instruments; ear hook type Lucae



National Ref : 02702126Title : Medical instruments; brain spatula type Olivecrona


Page 43Subsector : S15 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 02702127/0001 Project EstablishedICS :

National Ref : 02702127Title : Medical instruments; tongue depressor, double-ended



Subsector S18: STERILIZATION OF EQUIPMENT.


National Ref : 06301275Title : Sterilization - Steam sterilizers for pharmaceutical products - Part 1: Terminology



National Ref : 06301276Title : Sterilization - Steam-sterilizers for pharmaceutical products - Part 2: Apparatus

requirements



National Ref : 06301277Title : Sterilization - Steam sterilizers for pharmaceutical products - Part 3: Tests


Page 44Subsector : S18 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 06301278/0001 Project EstablishedICS :

National Ref : 06301278Title : Sterilization - Steam sterilizers for pharmaceutical products - Part 6: Operation



National Ref : 06301279Title : Sterilization - Steam sterilizers for pharmaceutical products - Part 7: Requirements on

services and installation



Subsector S22: ENERGY SAVING.


National Ref : NTA 8080:2008 Concept nlTitle : Durability criteria for biomass for energy purposesScope : The purpose of this project is to set up a technical agreement with specifications durable

produced biomass for energy purposes (electricity, warmth,cold, transportation fuels)



Subsector S24: SOIL QUALITY.

Subsector : S24 (Secondary Subsector)


Organization : NENCountry : NetherlandsProject ID : 50001382/0001 Project EstablishedICS : 13.080.05

National Ref : NVN 5720:2000/A2:2008 Concept nlTitle : Soil - Sediment - Investigation for exploratory surveyScope : Amendment to NVN 5720:2000

Relatedness :

Page 45

National : New


National Ref : NTA 5755:2008 Concept nlTitle : Soil quality - Strategy for further investigation - Investigation of the type, concentration and

extend of pollution of soil and soil lotsScope : This technical agreement describes the procedure for setting up an investigation strategy

for further investigation of soil. This further investigation is based on the results of the preliminary study and the exploratory survey. The purpose of further investigation is to gather more and more accurate data of the extent of pollution.



National Ref : NEN 5737:2008 Concept nlTitle : Soil quality - Ecological risk analysisScope : This standard support a transparant assessment of stress by pollution of the soil system. The

results o the assessment can be used to give decontamination measures a solid basis.



Subsector S99: UNDETERMINED.

Subsector : S99 Registration Date : 2008-07-10Organization : PKNCountry : PolandProject ID : 00276005/0001 Project EstablishedICS : 03.100.01, 13.100

National Ref : prPN-N-18004Title : Occupational health and safety management - GuidelinesScope : Gives guidelines on the development, implementation, maintenance and improvement of

occupational health and safety management systems. The guidelines are intended for use as a voluntary, internal management tool and not to be used for conformity and effectivenes assessment of the systems. Guidelines on estimation of costs related to occupational health and safety are also given

Relatedness :National : REV/AMD PN-N-18004:2001

Subsector : S99 Registration Date : 2008-07-01Organization : AENOR

Page 46Country : SpainProject ID : P0031613/0001 Project EstablishedICS :

National Ref : PNE 179003Title : Health services. Risk management of patient safety.Scope : This standard establishes a methodology for risk management of patient safety.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 48Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES.

Subsector : T01 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 13202046/0001 Project EstablishedICS :

National Ref : 13202046Title : Inland navigation vessels - Detachable railings - Stanchion, holder for stanchion


Subsector : T01 Registration Date : 2008-07-14Organization : DINCountry : GermanyProject ID : 13202047/0001 Project EstablishedICS :

National Ref : 13202047Title : Inland navigation vessels - Tiltable railings - Stanchion



Subsector T14: PACKAGING.

Subsector : T14 Registration Date : 2008-07-09Organization : AENORCountry : Spain Latest Date for Comments : 2008-08-08Project ID : P0031013/0002 Draft for public enquiryICS :

National Ref : PNE 126203Title : Glass containers. Glass bottles Rhin type. General characteristics.Scope : This UNE standard specifies the main characteristics of the glass bottles called Rhin.

Relatedness :National : REV/AMD UNE 126203:2007


Subsector T20: TRAM- AND RAILWAY ENGINEERING.

Subsector : T20 Registration Date : 2008-07-09Organization : LSTCountry : LithuaniaProject ID : 04300001/0001 Project EstablishedICS : 45.020, 45.040, 45.080

National Ref :Title : Railway applications. Passenger platforms for 1 520 mm railway linesScope : The standard specifies general requirements for the design and construction of new and

currently used platforms for 1 520 mm railway lines. These platforms shall be built in railway stations and stops where passangers get on and off. This standard includes requirements for overall dimensions, information, lighting, lay out of refuse collectors and

Page 49

Scope : benches, hazardous zones or electrical ground where required. This standard is related to the Latvian standard LVS 448:2006.



** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Page 55Subsector Z99: UNDETERMINED.

Subsector : Z99 (Secondary Subsector)


Organization : BSICountry : United KingdomProject ID : 00801964/0001 Project EstablishedICS :

National Ref : BS XXXXXTitle : Specification for submission of digital evidence for examination coursework



** End of Sector **

Documents

Monthly Notifications Register - unmz.i-servis.infounmz.i-servis.info/cz/50/n/200807_register_IP729.pdf · B33 Building design 205 315; 325 B34 ... I40 Industrial piping networks