Upload
joneyang
View
13
Download
0
Embed Size (px)
DESCRIPTION
MORNSUN launched a higher power Din-Rail AC/DC Converter -- LI120 after LI24(24W) / LI72(72W). It acts as the power supply of industrial bus in control cabinet, can provide all units with 24V voltage and be widely used in industrial control / electric and other distributed power systems. - PowerPoint PPT Presentation
Citation preview
MORNSUN launched 120W ultra-thin Din-Rail AC-DC Converter
MORNSUN launched a higher power Din-Rail AC/DC Converter -- LI120 after LI24(24W) /
LI72(72W). It acts as the power supply of industrial bus in control cabinet, can provide all units
with 24V voltage and be widely used in industrial control / electric and other distributed power
systems.
LI series DIN-Rail mounting AC/DC converters feature a input voltage range of
85~264VAC and an operating temperature of -25℃~+70℃, and multiple protections of
input under-voltage, output short-circuit, over-current, over-voltage and over-temperature.
They are ideal for industrial control, power electronics, communication applications, etc.
Introduction:
With 35mm installation width, LI120 can save the most space for you. In addition, it can support
150% peak load capability for 3 seconds that can give full protection to your load circuit.
LI120 adopts the newest circuit design and embeds power factor correction which makes its
efficiency up to 92% and stand-by power consumption down to 0.75W. This Mornsun Din-Rail
mounting product has complete protections protect your circuit from over-voltage / over-load /
continue short-circuit.
Features:
-35mm width DIN-Rail Mounting;
-Efficiency up to 92%, power factor up to 0.98;
-Input voltage: 85~264VAC (120~370VDC);
-Meets UL60950 / EN60950 standards;
-Operating temperature: -25~70℃;
-150% peak load capability;
-Remote On/Off
-Input under-voltage, short-circuit, over-current, over-voltage, over-temperature protection.
Note:
1. Packing Information please refer to 'Product Packing Information'. Packing bag number:
58220028;
2.Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25°C,
humidity
3. All index testing methods in this datasheet are based on our Company’s corporate standards;
4.The performance indexes of the product models listed in this manual are as above, but some
indexes of non-standard model products will exceed the above-mentioned requirements, and please
directly contact our technician for specific information;
5. We can provide product customization service;
6. The product specification may be changed at any time without prior notice.