Embed Size (px)
Citation preview
MOULDING YOUR WORLD WITH ENDLESS POSSIBILITIES.
Whatever it takes.taigabuilding.com
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
1
PREMIUM PRIME MOULDINGS DISTRIBUTED BY TAIGA BUILDING PRODUCTS
Taiga mouldings are manufactured from the finest, medium-density fibreboard
(MDF) available and treated with a unique coating that accepts any type of high-
quality trim paint. The process employed in the actual moulding and priming is
state-of-the-art, when compared to existing industry standards. Many hours of
research, development and laboratory tests for uniformity, strength and other
structural qualities have produced a product that is virtually unsurpassed.
LET YOUR HOME INSPIRE YOUR CREATIVITY. ADD STYLE AND BEAUTY WITH TAIGA PREMIUM PRIME MOULDINGS.
FOR MORE INFORMATION VISITTAIGABUILDING.COM
* ALL IMAGES PROVIDED BY SIMPLY IRRESISTIBLE AND SOLOMON DAVIS
PLEASE NOTE THAT NOT ALL PRODUCTS MAY BE AVAILABLE IN YOUR REGION, CONTACT YOUR LOCAL TAIGA REPRESENTATIVE FOR MORE INFORMATION.
TAIGA IS A WHOLESALE DISTRIBUTION COMPANY, WE DO NOT SELL DIRECTLY TO THE GENERAL PUBLIC.
PLEASE CONTACT THE NEAREST RETAILER FOR PRODUCT AND PRICING INFORMATION.
2
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
3
PREMIUM PRIME MDFSPECIES PROFILE
Medium Density Fibreboard (MDF) is part of a family of environmentally friendly
products known as Engineered Wood.
Typically, wood shavings, chips and sawdust that remain after a tree is milled into
lumber are collected, cleaned and refined to create uniform particles or fibres.
Excess moisture is removed and an adhesive resin is added. The combination of
92% wood and 8% resin, on average, is formed into long thick mats, which are then
compressed under intense heat and pressure. Progress at each stage is closely
monitored by computers, which can measure slight variations that even the human
eye cannot detect.
The resulting wood panels are laboratory-tested for uniformity, strength, screw-
retention and other structural qualities, as required to meet the stringent industry
standards for furniture and cabinet-grade wood panel products.
4
1
2
3
5
4
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
5
MOULDINGS GALLERYREFERENCE GUIDE
CASINGS are moulded or surfaced on all four sides in a variety of widths and
thicknesses for trimming door and window openings.
See Ultralight/Pacprime Light on pages 6 and 7, see Primed Pine on page 9.
CROWNS are used as a decorative element to connect surfaces which
meet at an angle. Installing crown mouldings is an effective way to apply
elegance and character to a traditional looking room.
See Ultralight/Pacprime Light on pages 16, see Primed Pine Finger Joint on page 17.
ARCHITRAVES are classic, Greek-style architectural elements that are used to
accent the top of a door, window or other openings.
See page 13.
BASEBOARDS are base mouldings around the perimeter of a room at
the point of intersection of the walls and finished floor.
See Ultralight/Pacprime Light on page 10 and 11, see Primed Pine Finger Joint
on page 9.
CHAIR RAILS are used as decorative elements or dividers between
wall coverings such as wallpaper, paint, or wainscoting.
See Ultralight/Pacprime Light on page 21, see Primed Pine Finger Joint
on page 20.
1
2
3
5
4
6
CASINGS
T-1113/4” X 2-3/4”15’
T-13411/16” X 3-1/4”16’
T-1001/2” X 2-1/2”7’, 8’, 14’
T-1015/8” X 2-1/2” 7’, 8’, 14’
T-1315/8” X 3”15’
T-1275/8” X 2-3/4”15’
T-1417/8” X 3-1/2”16’
T-1421” X 4-1/2” 16’
T-1291-1/4” X 4”16’
T-11291” X 3-1/4” 16’
ULTRALIGHT/PACPRIME LIGHT
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
7
CASINGS
T-144B21” X 4”16’
T-144C23/4” X 3”16’
T-1793/4” X 3-1/4” 15’
T-1915/8” X 3-1/2” 16’
T-1813/4” X 3-1/2” 15’
T-15811/16” X 3-1/2” 16’
T-1433/4” X 2-3/4”15’
T-1833/4” X 3-1/4” 15’
T-3561/2” X 2-1/4” 14’
ULTRALIGHT/PACPRIME LIGHT
8
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
9
FINGER JOINT CASINGPRIMED PINE
T-3567/16” X 2-1/4” 14’
T-30007/16” X 1-7/16” 14’
T-30027/16” X 2-1/4” 14’
FINGER JOINT BASEBOARDS
T-390 (201)1/2” X 3/4”16’
T-3051/2” X 3-1/2”16’
T-3501/2” X 5-1/2”16’
PRIMED PINE
10
BASEBOARDSULTRALIGHT/PACPRIME LIGHT
T-2735/8” X 5-1/2” 16’
T-2745/8” X 7-1/4”16’
T-3065/8” X 5-1/4” 16’
T-3075/8” X 7-1/4”16’
T-3405/8” X 4-1/8”16’
T-330A5/8” X 5-1/4”16’
T-3315/8” X 7-1/4” 16’
T-3201/2” X 3-1/4”16’
T-3095/8” X 3-1/4”16’
T-3105/8” X 4-1/8”16’
T-3115/8” X 5-1/4”16’
T-3135/8” X 6-1/2”16’
T-3161/2” X 4-1/4”16’
T-3181/2” X 5-1/4”16’
T-3191/2” X 7-1/4”16’
T-3231/2” X 3-1/4”16’
T-3125/8” X 4-1/4”16’
T-3011/2” X 3-1/4”14’
T-3021/2” X 3-1/2”16’
T-3251/2” X 4”16’
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
11
BASEBOARDSULTRALIGHT/PACPRIME LIGHT
T-3345/8” X 5-1/2” 16’
T-3473/4” X 7”16’
T-3493/4” X 9”16’
T-346A25/8” X 5-1/4” 16’
T-346B211/16” X 7-1/4” 16’
T-346C211/16” X 9” 16’
T-3615/8” X 5-1/4”16’
T-3635/8” x 7-1/4”16’
T-391A1/2” X 5”16’
T-3921/2” X 7-1/4” 16’
T-3271/2” X 4-1/2”16’
T-3571/2” X 5-1/4”16’
T-3591/2” X 5-1/2”16’
T-3621/2” X 6”16’
T-3641/2” X 7-1/4”16’
T-365E1/2” X 9-1/4”16’
T-3661/2” X 11-1/4”16’
12
FINGER JOINT WINDOW STOOLPRIMED PINE
T-34101-1/4” X 5-1/4” 16’
T-34111-1/4” X 7-1/4”16’
T-34151-1/4” X 12-7/8”16’
T-34131-3/4” X 7-1/2”16’
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
13
ARCHITRAVESULTRALIGHT/PACPRIME LIGHT
T-95321/2” X 1-3/8”10’
T-50151-1/2” X 5-1/2”12’
T-5301” X 3-1/2”16’
T-5451” X 4-1/2”16’
T-5551” X 5-1/2”16’
T-5751” X 7-1/4”16’
T-50001-1/4” x 3-3/4”16’
T-50161-1/2” X 6-1/2”12’
T-50101-1/4” x 4-1/4”16’
T-50201-1/4” X 5-1/4”16’
T-50251-1/4” X 5-1/4”16’
14
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
15
SHIPLAPPACPRIME LIGHT
1x6 SHIPLAP5/8” x 5-1/2”16’
1x8 SHIPLAP5/8” x 7-1/4”16’
3/8” 3/8”
3/16” 3/16”
5-1/8” 6-7/8”
5-1/2” 7-1/4”
16
CROWNSULTRALIGHT/PACPRIME LIGHT
T-4091-1/4” X 1-7/8”16’
T-4131-1/4” X 6-5/16”16’
T-4241” X 4-1/2”16’
T-4411-1/4” X 5-3/4”16’
T-4421-1/4” X 7-1/4”16’
T-4125/8” X 4-1/2”16’
T-4291-1/4” X 5-1/4”16’
T-4301-1/4” X 6-3/4”16’
T-451 (51)1/2” X 3-1/4”16’
T-470 (47)5/8” X 4-1/4”16’
T-4715/8” X 5-1/4”16’
T-4217/8” X 6-15/16”16’
T-4381-1/4” X 5-1/4”16’
T-4391-1/4” X 7-1/4”16’
T-4771” X 5-1/4”16’
T-4781-1/4” X 6-3/4”16’
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
17
FINGER JOINT CROWNSPRIMED PINE
T-440 (3240)3/8” X 5/8”14’
T-440L (L3240)5/16” X 1/2”14’
T-442 (3242)1/2” X 3/4”16’
T-479/16” X 4-5/8”16’
T-444 (3244)9/16” X 1-1/4”16’
T-519/16” X 3-1/4”16’
T-448 (3248)1-1/4” X 2-1/4”16’
18
FINGER JOINT T-BAR
FINGER JOINT BRICK MOULDSPRIMED PINE
PRIMED PINE
P-1801-1/4” X 2”85”, 170”
P-3031-1/4” X 1-1/2”7’, 100”, 14’
P-33221-1/4” X 2-1/4”85”, 170”
T-BAR2-1/2” X 3-1/2”7’, 98”
T-BAR3-3/16” X 3-11/16”98”
INTERIOR T-BAR2-3/8” X 2-7/8”7’
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
19
FINGER JOINT 20 MIN FIRE LABELPRIMED PINE
FINGER JOINT JAMBPRIMED PINE
EXTERIOR KERF JAMB4-9/16”1-1/4” X 4-9/16” X 2-1/8” KERF
5-3/4”1-1/4” X 5-3/4” X 2-1/8” KERF
6-9/16”1-1/4” X 6-9/16” X 2-1/8” KERF
7-3/8”1-1/4” X 7-3/8” X 2-1/8” KERF
8-7/8”1-1/4” X 8-7/8” X 2-1/8” KERF
EXTERIOR KERF JAMB4-9/16”1-1/4” X 4-9/16” X 2-1/8” KERF
5-1/4”1-1/4” X 5-1/4” X 2-1/8” KERF
6-9/16”1-1/4” X 6-9/16” X 2-1/8” KERF
7-1/4”1-1/4” X 7-1/4” X 2-1/8” KERF
8-1/2”1-1/4” X 8-1/2” X 2-1/8” KERF
8-7/8”1-1/4” X 8-7/8” X 2-1/8” KERF
INTERIOR RAB JAMB4-9/16”1-1/4” X 4-9/16” X 1-3/8” RAB
4-13/16”1-1/4” X 4-13/16” X 1-3/8” RAB
5”1-1/4” X 5” X 1-3/8” RAB
5-1/4”1-1/4” X 5-1/4” X 1-3/8” RAB
6-9/16”1-1/4” X 6-9/16” X 1-3/8” RAB
7-1/4”1-1/4” X 7-1/4” X 1-3/8” RAB
4-9/16”1-1/4” X 4-9/16” X 1-3/4” RAB
5-1/4”1-1/4” X 5-1/14” X 1/3/4” RAB
6-9/16”1-1/4” X 6-9/16” X 1-3/4” RAB
7-1/4”1-1/4” X 7-1/4” X 1-3/4” RAB
20
FINGER JOINT MOULDINGSPRIMED PINE
T-906 (606)7/16” X 2-1/4”16’
T-326411/16” X 11/16”16’
T-34281/2” X 3/4”14’
T-9703/8” X 2-1/4”14’
T-32801-1/16” X 1-1/16”16’
T-207 (107)11/16” X 1-1/4”16’
T-320611/16” X 11/16”16’
T-922 (3422)3/8” X 1-1/4”7’, 14’
T-212 (112)11/16” X 1-7/8” 16’
1/2”
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
21
FINGER JOINT MOULDINGSPRIMED PINE
CHAIR RAIL / PANEL MOULDULTRALIGHT/PACPRIME LIGHT
T-2777/8” X 1-1/4”16’
T-2781-1/16” X 1-3/4”16’
T-22111/16” X 1-1/2”16’
T-2987/8” X 2”16’
T-29711/16” X 316’
1/2” 3/4”
22
FLAT STOCKULTRALIGHT/PACPRIME LIGHT
FINGER JOINT FLATSTOCKPRIMED PINE
E2E MDF FLAT STOCK1X211/16” X 1-1/4”14’
1X311/16” X 2-1/216’
1X411/16” X 3-1/2”16’
1X511/16” X 4-9/16”16’
1X611/16” X 5-1/2”16’
1X711/16” X 6-9/16”16’
1X811/16” X 7-1/4”16’
1X1011/16” X 9-1/4”16’
1X1211/16” X 11-1/4”16’
1X211/16” X 1-3/8”14’
1X311/16” X 2-1/2”16’
1X411/16” X 3-1/2”16’
1X511/16” X 4-9/16”16’
1X611/16” X 5-1/2”16’
1X711/16” X 6-9/16”16’
1X811/16” X 7-1/4”16’
1X1011/16” X 9-1/4”16’
1X1211/16” X 11-1/14”16’
24
NOTES
T
AIGA
MOU
LDIN
GS •
201
9 CA
TALO
GUE
– BC
REG
ION
25
NOTES
MOULDINGS AS OF 2019NANAIMO4101 MOSTAR ROADNANAIMO, BC V9T 5V1PH: 1.800.667.1470
LANGLEY26848 GLOUCESTER WAYLANGLEY, BC V4W 3V6PH: 1.866.816.7741
KELOWNA2545 ACLAND ROADKELOWNA, BC V1X 7J4PH: 1.800.665.1187
We endeavour to update our product guides and informational materials on a regular basis. As design taste and technology changes we may also have new products that don’t make it into a printed piece. Please contact your Taiga representative for all the latest inventory and specials that suit your business requirements.
Whatever it takes.taigabuilding.com
