Mounting ETS-Lindgren Antenna - ARF Japan · 2020. 5. 29. · BiConiLog™ Antennas 3140B 7-TR refers to 109042, 106328, and 108197 booms: Mast refers to 2070 Series, 2075, and 2175

www.ets-lindgren.com399807, Rev D

Warranty Information

For complete warranty information, see the user manual for your ETS-Lindgren antenna.

Mounting ETS-Lindgren Antennas

This guide describes the hardware required to mount your ETS-Lindgren antenna to a tripod, mast, or boom,

and is intended to be used in conjunction with the antenna user manual. This guide does not replace the

antenna user manual.

These antennas and mount destinations are included:

© Copyright 2008–2010 by ETS-Lindgren L.P. All Rights Reserved. No part of this document may be copied by any meanswithout written permission from ETS-Lindgren L.P.

The logo and are trademarks of ETS-Lindgren L.P.ETS-Lindgren BiConiLog

USA Headquarters1301 Arrow Point DriveCedar Park, TX 78613Phone: [email protected]

Please see fwww.ets-lindgren.com or a list of all ETS-Lindgren offices.

WARRANTYONLY QUALIFIED PERSONNEL should install, operate, or service this equipment.

CONTACT ETS-LINDGREN PRIOR TO SERVICING. Servicing (or modifying) the unit by yourself may voidyour warranty. If you attempt to service the unit by yourself, disconnect all electrical power before starting.There are voltages at many points in the instrument that could, if contacted, cause personal injury.Only trained service personnel should perform adjustments and/or service procedures upon this instrument.Capacitors inside this instrument may still be CHARGED even when instrument is disconnected from its power source.

Safety Information

Before mounting an antenna, see .Safety Information For complete safety, regulatory, and

other product marking information, see the user manual for your ETS-Lindgren antenna.

BiConiLog Antennas –™ 3140B, 3149, 3142C, 3142D

Biconical Antennas –

Mini-Bicon Antennas –

Log Periodic Antennas –

Double-Ridged Waveguide Horns –

3164 Series Horns –

Pyramidal Horn Antennas –

Dipoles –

Loop Antennas and Rod Antennas –

Conical Log Spirals –

High Gain Conical Horns –

3109, 3104C, 3110B, 3110C

3180, 3181, 3182, 3183, 3184

3144, 3147, 3148, 3148B

3106B, 3115, 3116, 3117

Quad-Ridge Horns (–05, –06, –07, –08), Dual-Polarized Horns (–03, –04)

3160 Series, 3161 Series

3121C, 3121D

loop antennas, rod antennas

3101, 3102, 3103

3163 Series (–03, –04, –05, –06)

Antenna Type

Mount Destination

Revision/Date:

B, Updates–February, 2009

A, Initial Release–June, 2008 C, Added mini-bicons, 3301C–November, 2009

D, Updated 3149 mounting, added 3163–March, 2010

Model 4-TR Tripod –

Model

ETS-Lindgren 4-TR tripod

7-TR Tripod Positioner –

109042 –

106328 –

108197 –

108507 –

Mast –

2x2 Boom –

includes 109042, 106328, 108197, and 108507 booms:

straight; for general antenna mounting on a 7-TR

offset; for general antenna mounting on a 7-TR with pneumatic or manual polarization

center rotate; for rear-mount stinger-type antennas only

for the 3106 and 3106B only

2070 Series, 2075, and 2175 Antenna Towers

typical 2-inch by 2-inch boom; non-ETS-Lindgren and previous generation EMCO positioning systems

www.ets-lindgren.com

BiConiLog™ Antennas

3140B

7-TR refers to 109042, 106328,and 108197 booms:

Mast refers to 2070 Series, 2075,and 2175 Antenna Towers

2x2 Boom refers to a typical2-inch by 2-inch boom;non-ETS-Lindgren and previousgeneration EMCO positioning systems

– straight; for generalantenna mounting on a 7-TR

offset; for generalantenna mounting on a7-TR with pneumatic or manualpolarization

center rotate; forrear-mount stinger-typeantennas only

109042

106328

108197

–

–


4-TR: Do not mount toa 4-TR

7-TR: Mounts directly toa 7-TR without additionalhardware

Mast: Additional hardwarerequired to mount to a mast

Stinger Mounts4-TR

Do not mountto a 4-TR.

OR

7-TR, Mast 2x2 BoomNotes

Standard Parts

105861B Thread Insert(3140B ships with two)

100989 Polarizing Antenna Adapter(3140B ships with two)

Antennas shown here ship with thesestandard parts:

Antennas include mounting bracket(attached) and mounting knob(s)

101913Fixed

AntennaMount

105861BThreadInsert

100989 PolarizingAntenna Adapter

OR106470 Non-Polarizing

Antenna Adapter

Toantenna

mountingbracket,

insertknob

100989 PolarizingAntenna Adapter (2)


Antenna Adapter (2)

Toantenna

mountingbracket,

insertknob

104136Boom

AntennaMountKnob

(2)

Through boomon 7-TR, Mast

104169Boom

AntennaMountKnob

(2)


105861BThread

Insert (2)

100989 PolarizingAntenna Adapter (2)


Antenna Adapter (2)

Toantenna

mountingbracket,

insertknob

Insert boom through

4-TR

OR OR


BiConiLog™ Antennas, continued







109042

106328

108197

–

–





Stinger Mounts Notes

Standard Parts

105861B Thread Insert(3140B ships with two)

100989 Polarizing Antenna Adapter(3140B ships with two)





Antenna Adapter

Toantenna

mountingbracket,

insertknob

104169Boom

AntennaMountKnob

105861BThreadInsert


2x2 Boom

101913Fixed

AntennaMount

105861BThreadInsert



Antenna Adapter

Toantenna

mountingbracket,

insertknob

3149, 3142D, 3142C

3149 101950Support Rod

101942BSupport

Base

To 4-TR

Toantenna

mountingbracket,

insertknob

100989Polarizing

Antenna Adapter

Toantenna

mountingbracket,

insertknob

105861BThread Insert

To 4-TR


The 3149 can mount directly to a 4-TR.Use of a 102308 Swivel Antenna Mountsimplifies polarization, and is optional.

102308Swivel

AntennaMount

To 4-TR



Antenna Adapter

Toantenna

mountingbracket,

insertknob

7-TR, Mast

OR100989 PolarizingAntenna Adapter


Antenna Adapter

Toantenna

mountingbracket,

insertknob

104136Boom

AntennaMountKnob


3142C

3142D

Stinger

Stinger

Insert boom through


Biconical Antennas

3109







109042

106328

108197

–

–


3109

3110C, 3110B, 3104C

3104C

3110B

3110C




Stinger Mounts

Standard Parts

100733 Support Rod

102108 Clamp Block

3110C, 3110B, and 3104C antennasship with these standard parts:

101942B Support Base

4-TR

OR OR

Notes4-TR

Can mount directly to a 4-TR.Use of a 102308 Swivel Antenna Mountsimplifies polarization, and is optional.

102308Swivel Antenna Mount

To 4-TR

Toantenna

mountinghole

7-TR, Mast

104169 Boom AntennaMount Knob


Toantenna

mountinghole

2x2 Boom

106102 UniversalAntenna Mount

104136Boom

AntennaMountKnob

Through boom

Antennabalun

100733Support Rod

101942BSupport

Base

To 4-TR

102108Clamp Block

Antennashaft


102308Swivel

AntennaMount

To 4-TR

102108Clamp Block

Antennashaft


To 4-TR

102108Clamp Block

Antennashaft

7-TR, Mast

OR

104169Boom

AntennaMountKnob


102108Clamp Block

Antennashaft



104136Boom

AntennaMountKnob


Antennabalun

2x2 Boom

OR

101913Fixed

AntennaMount

102108Clamp Block

Antennashaft

105861BThreadInsert

101937Swivel

AntennaMount

102108Clamp Block

Antennashaft

105861BThreadInsert

Stinger

Insert boom through Insert boom through

7-TR, Mast


Mini-Bicon Antennas

3109







109042

106328

108197

–

–


3181, 3183, 3184Notes

3180, 3182

Stinger Mounts

4-TR: SeeAbout Mounts for3181/3183/3184

7-TR, Mast, 2x2 Boom:Additional hardwarerequired

3181, 3183, 3184

Mast: Additional hardwarerequired

3180, 3182

Standard Parts

4-TR / 7-TR: Mountsdirectly to a 4-TR or 7-TRwithout additional hardware

4-TR

OR OR

100733Support Rod

101942BSupport

Base

To 4-TR

102108Clamp Block

Stinger


102308Swivel

AntennaMount

To 4-TR

102108Clamp Block

Stinger


To 4-TR

102108Clamp Block

Stinger

104169Boom

AntennaMountKnob


102108Clamp Block

Stinger


2x2 Boom

OR

Stinger

3180

3182

Stinger

101913Fixed

AntennaMount

102108Clamp Block

Stinger

105861BThreadInsert

Insert boom through

101937Swivel

AntennaMount

102108Clamp Block

105861BThreadInsert

Insert boom through

3181, 3183, and 3184 ship

with 113956 Antenna Mount

Assembly, which includes the

114669 Spacer; no additional

hardware required to mount

to 4-TR

About Mountsfor 3181/3183/3184

3180 and 3182 antennasship with these standard parts:

102108 Clamp Block


100733 Support Rod

Stinger

3181, 3184

3183

3180 withmini-cageelements 3180 with

solid conicalelements

Stinger

4-TR

113956 AntennaMount Assembly

To4-TR forverticalmount

To4-TR for

horizontalmount

(extensionoptional)

Stinger

2x2 Boom


101937Swivel

AntennaMount

Insert boom through

Stinger

For verticalmount

Forhorizontal

mount(extensionoptional)

7-TR, Mast


Stinger

104169Boom

AntennaMountKnob

Through boom

For verticalmount place

114669 spacerover extension

Forhorizontal

mount(extensionoptional)

Stinger

Standard Parts


Log Periodic Antennas







109042

106328

108197

–

–


105861B Thread Insert

100989 Polarizing Antenna Adapter


3148B

3148, 3147, 3144




Stinger Mounts Notes4-TR

OR OR100989Polarizing

Antenna Adapter

Toantenna

mountingbracket,

insertknob

105861BThreadInsert

To 4-TR

101950Support Rod

101942BSupport

Base

To 4-TR

Toantenna

mountingbracket,

insertknob



102308Swivel

AntennaMount

To 4-TR



Antenna Adapter

Toantenna

mountingbracket,

insertknob


7-TR, Mast

OR

104136Boom

AntennaMountKnob




Antenna Adapter

Toantenna

mountingbracket,

insertknob



Antenna Adapter

Toantenna

mountingbracket,

insertknob

104169Boom

AntennaMountKnob

105861BThreadInsert


2x2 Boom

OR100989 PolarizingAntenna Adapter


Antenna Adapter

Toantenna

mountingbracket,

insertknob

101913Fixed

AntennaMount



Antenna Adapter

Toantenna

mountingbracket,

insertknob

101937Swivel

AntennaMount

Stinger


3147

3148

Notes7-TR, Mast


Double-Ridged Waveguide Horns

3115

3106B

3116

3117

4-TR

The 3115, 3116, and 3117mount directly to a 4-TR.

Mounting hardware isincluded; no additional

hardware required.

Do not mount the3106B to a 4-TR.





Stinger Mounts2x2 Boom

OR

2x2 Boom

104169Boom

AntennaMountKnob


Toantenna

mountinghole

101913Fixed

AntennaMount

101937Swivel

AntennaMount

Toantenna

mountinghole

Toantenna

mountinghole

7-TR refers to these booms:






109042

106328

108197

–

–

–c(for 3106/B only)enterline rotation boom;

when changing polarization,maintains centerline rotation

108507

Stinger


Mounted onto 4-TR

MountE

xam

ple

Model 3106B

Mounted onto 7-TR

with 3106B centerline rotation boom

4-TR 7-TR, Mast 2x2 Boom


3164 Series Horns







109042

106328

108197

–

–


Quad-Ridge Horns

3164-05, -06, -07, -082x2 Boom4-TR

Do not mount3164-06, -07, or -08antennas to a 4-TR.

See .About 3164 Mounts

7-TR, Mast

See .About 3164 Mounts See .About 3164 Mounts

Dual-Polarized Horns

3164-03, -04

Notes

Standard Parts

105861B Thread Insert–ships with3164-08

106974 Mount–ships with 3164-06and 3164-07

3164-05–ships withmounting hardware; noadditional hardware requiredto mount to 4-TR, 7-TR,mast, or 2x2 boom

106974 Mount–only for3164-03, -04, -06, and -07

112859 Mount–only for3164-08

About 3164 Mounts

OR

104136Boom

AntennaMountKnob


Toantenna

mountinghole

106974 Mount

105861BThreadInsert

104169Boom

AntennaMountKnob

106974 or 112859Mount


Toantenna

mountinghole

106974 or 112859Mount

105861BThreadInsert

101913Fixed

AntennaMount

Toantenna

mountinghole

105861BThreadInsert

106974 Mount

To 4-TR

Toantenna

mountinghole

106974 Mount

105861BThreadInsert

101913Fixed

AntennaMount

Toantenna

mountinghole

104136Boom

AntennaMountKnob


Toantenna

mountinghole

106974 or 112859Mount

Insert boom through

Insert boom through


Pyramidal Horn Antennas

3160 Series, 3161 Series

4-TR: Do not mount large pyramidalhorn antennas to a 4-TR.







109042

106328

108197

–

–

Notes


3160-09 3160-10–and shipwith a supplementalmount that may be usedwith the 4-TR, 7-TR, mast,and 2x2 boom

About 3160 Mounts7-TR, Mast

Pyramidal horn antennasmount directly to a 4-TR;no additional hardware

required.

Do not mount 3160-01,3160-02, and 3161-01antennas to a 4-TR.

See .About 3160 Mounts See .About 3160 MountsSee .About 3160 Mounts

4-TR 2x2 Boom

OR

2x2 Boom

104169Boom

AntennaMountKnob


Toantenna

mountinghole

101913Fixed

AntennaMount

101937Swivel

AntennaMount

Toantenna

mountinghole

Toantenna

mountinghole


4-TR

OR OR

Standard Parts


Dipoles







109042

106328

108197

–

–


3121D

3121C




Stinger Mounts

100733 Support Rod

102108 Clamp Block


Antennas shown here ship with theseantenna adapters:

Notes

100733Support Rod

101942BSupport

Base

To 4-TR

102108Clamp Block

Antennashaft


102308Swivel

AntennaMount

To 4-TR

102108Clamp Block

Antennashaft


To 4-TR

102108Clamp Block

Antennashaft

7-TR, Mast

OR

104169Boom

AntennaMountKnob


102108Clamp Block

Antennashaft



104136Boom

AntennaMountKnob


Antennabalun

2x2 Boom

OR

101913Fixed

AntennaMount

102108Clamp Block

Antennashaft

105861BThreadInsert

101937Swivel

AntennaMount

102108Clamp Block

Antennashaft

105861BThreadInsert

Stinger



Loop Antennas and Rod Antennas

Loop Antennas

Rod Antennas







109042

106328

108197

–

–


Notes7-TR, Mast4-TR

Loop antennas androd antennas mount

directly to a 4-TR;no additional hardware

required.

2x2 Boom

OR

2x2 Boom

104169Boom

AntennaMountKnob


Toantenna

mountinghole

101913Fixed

AntennaMount

101937Swivel

AntennaMount

Toantenna

mountinghole

Toantenna

mountinghole


MIL-STD-461F Kit–Tocomply with the standard,a cable and groundingkit (113359) is includedwith the 3301C.

4-TR Light Tripod–Tocomply with theMIL-STD-461F standard,a smaller tripod (4-TR,1ML)is available (optional).

About 3301C

See About 3301C3301C

Standard Parts


Conical Log Spirals

Conical log spiralsnot intended

for 2x2 boom.

3101

3102

3103







109042

106328

108197

–

–

Conical log spiralsmount directly to a 7-TR.

Mounting hardware isincluded; no additional

hardware required.


Conical log spirals mountdirectly to a 4-TR;

no additional hardwarerequired.

101941 Support Rod–ships with3101

101943B Support Rod–ships with3102

101944 Support Rod–ships with3103

101942B Support Base–ships with3101, 3102, and 3103

Notes4-TR 7-TR, Mast 2x2 Boom


High Gain Conical Horns







109042

106328

108197

–

–


Notes

Model 3163 Serieshorn antennas

mount directly to a 4-TR;no additional hardware

required.

4-TR 7-TR, Mast

104169Boom

AntennaMountKnob


Toantenna

mountinghole

2x2 Boom

OR

2x2 Boom

101913Fixed

AntennaMount

101937Swivel

AntennaMount

Toantenna

mountinghole

Toantenna

mountinghole


3163 Series

-03, -04, -05, -06

3163-03

3163-04

3163-05

3163-06

About 3163 Series

The backplate on each

Model 3163 Series provides

threaded holes for

mounting directly into the

feed section of

a tapered chamber.

Additionally, you can use

the threaded holes

to create your own custom

mounting solution. See the

3163 manual for a diagram

of each backplate.

Each Model 3163 Series

includes a built-in

1/4–20 thread mount.


Mount Examples


3181, 3184

Stinger-mounted

onto 4-TR tripod with the

113956 antenna mount assembly

Stinger-mounted onto a 4-TR tripod

with a 102108 clamp block

3180

Stinger-mounted onto 4-TR tripod

with a 102108 clamp block and 100733 support rod

(101942B support base not shown)

3182 3183

Stinger-mounted onto 4-TR tripod

with a 102108 clamp block

3301C

Mounted onto tripod

Documents

Mounting ETS-Lindgren Antenna - ARF Japan · 2020. 5. 29. · BiConiLog™ Antennas 3140B 7-TR refers to 109042, 106328, and 108197 booms: Mast refers to 2070 Series, 2075, and 2175