MSC vNastran 4D

Installation Guide <crack>

Installation is very easy if you follow the readme.txt carefully. But since you will encounter a problem, I’ll explain it.

Step-by-step follow the readme file:

MSC visualNastran Desktop 2004 SP1

1) Run install.exe and install visual Nastran Desktop 2004 Pick the Nastran 4D option when asked. 2) Run setup again and install vNFlexlm.

3) Open the license.dat in the crack directory and change "host" to your computer name. Copy the license.dat to the Flexlm instillation directory that was created in the previous step. 4) Set the environment - MSC_LICENSE_FILE = 1700@host

5) Stop and restart the "FLEXlm Service for vNDesktop". 6) Run the VN4D and got to the menu Help->licensing. Select Flexlm Licensing and the "Server" button. Type in your computer in the "Host" field and 1700 in the "Port" field. Hit apply and then okay.

Step 1

For Simulink users only

Don’t worry, this is because of incompatibility of this release with your new Matlab. You’ll do it manually later.

Step 2

Remember your compuer name from this message

Important! Leave this for a while, then do Step 3.

If you click continue, you’ll get the following error. Don’t worry, leave it as is and don’t close. Do Step 3.

Step 3

Instead of mypc or host, enter your computer name

You can remember your computer name from a previous messageOr find it in control panel>system

After copying the license.dat to e.g. C:\Program Files\vNFlexnt, return to the message you have leaved, then click Yes.

You’ll see the following nice message.

Step 4

Note: enter your computer name instead host or mypc

Step 5

For this run:C:\Program Files\vNFlexnt\lmtools.exe

Step 6 : After running MSC.visualNastran 4D 2004 from start menuYou’ll see this menu. You can also find it from Help>Licensing

Good luck

For simulink users:

Remember to add this folder

C:\Program Files\visualNastran Desktop\Matlab

To your matlab path and save it.

vNPlant block will be added to your library browser.