MSRP Price Book - Pythia Technologies · Liebert IGM (RS-422) to IGM ... Configurations Part Number MSRP Warranty ... Reference the chart below to help choose the right hardware platform

MSRP Price Book

Released 6/1/2016

Pythia Technologies Incorporated

(740) 936.5362

[email protected]

Copyright 2014 All rights reserved

MS0-RS24 (RS232 to RS485) Part Number MSRP WarrantySerial to RS-485 (typically Modbus) MS0-RS24 $295 $30- with K01 Kit (DIN-Rail, Outlet and XFMR) K01 $350 $35- with K01 & EN2 Enclosure (10x6x6 screw top) EN2 $550 $50

MS0 (RS485 to IP) Part NumberSerial to Network MS0-STD $425 $40Modbus RTU to Modbus TCP MS0-MBT $425 $40Liebert IGM (RS-422) to IGM (IP) MS0-IGM $425 $40- with K01 Kit (DIN-Rail, Outlet and XFMR) K01 $475 $50- with K01 & EN2 Enclosure (10x6x6 screw top) EN2 $750 $75

MS0-MBS (Modbus / BACnet / SNMP)Modbus RTU/TCPIP to BACnet IP to SNMP MS0-MBS $850 $85- with K03 Kit (DIN-Rail and Power Supply) K03 $950 $95- with K03 & EN2 Enclosure (10x6x6 screw top) EN2 $1,025 $100

MS0-MRL (Modbus 485 to Lon)Modbus RTU to LON MS0-MRL $850 $85- with K03 Kit (DIN-Rail and Power Supply) K03 $950 $95- with K03 & EN2 Enclosure (10x6x6 screw top) EN2 $1,025 $100

MS0-BR (BACnet Router) BACnet MSTP to IP (BACnet Router) MS0-BR $625 $60- with K06 Kit (DIN-Rail and Power Supply) K06 $725 $70- with K06 & EN2 Enclosure (10x6x6 screw top) EN2 $950 $95

MS0 (Generac Protocol to IP) Generac Serial to Modbus TCP MS0-GNM $425 $40Generac Serial to Generac IP MS0-GNS $425 $40- with K01 Kit (DIN-Rail, Outlet and XFMR) K01 $475 $50- with K01 & EN2 Enclosure (10x6x6 screw top) EN2 $725 $70

MicroServer (Modbus 485/IP, BACnet, SNMP and XML Large Scale)MS1 for 16 Devices MS1-DT-XXYY-16 $1,850 $180MS1 for 32 Devices MS1-DT-XXYY-32 $2,250 $225MS2 for 32 Devices MS2-DT-XXYY-32 $2,750 $275MS2 for 64 Devices MS2-DT-XXYY-64 $3,250 $325MS3 for 64 Devices MS3-DT-XXYY-64 $4,950 $495MS3 for 128 Devices MS3-DT-XXYY-128 $5,950 $595MS3 for 247 Devices MS3-DT-XXYY-247 $6,950 $695

MS1, MS2 & MS3 Configurations Part NumberMS1 for 16 Devices MS1-DM-16 $2,550 $255MS1 for 32 Devices MS1-DM-32 $3,100 $310MS2 for 32 Devices MS2-DM-32 $3,350 $335MS2 for 64 Devices MS2-DM-64 $4,350 $435MS3 for 64 Devices MS3-DM-64 $5,550 $555MS3 for 128 Devices MS3-DM-128 $6,500 $650MS3 for 247 Devices MS3-DM-247 $7,500 $750

Data Transformation Pricing (Protocol Conversion)

For Sales Contact:

[email protected]

740.936.5362

Data Monitoring Pricing (Facilities / IT Monitoring)

Configurations Part Number MSRP Warranty32 Universal CM03 $500 $508 Univ input / 13 relay out CM04 $500 $50* with K03 Kit (DIN-Rail and Power Supply) K03 $590 $60* with K03 & EN2 Enclosure (10x6x6 screw top) EN2 $700 $70

Key-hole Mount 8-Dry, 4 Analog, 1 Relay, Leak cable CM50 $895 $90Rack Mount Bracket CM50-RMB $175 $20

1U Rack Mount 8 Dry Inputs - Expandable CM500-1U $3,200 $2502U Rack Mount 8 Dry Inputs - Expandable CM500-2U $3,500 $275

AccessoriesCM500 Expansion Card 12-Universal, 8 Relay Output CM500-EXPA $1,250 $100CM500 Expansion Card 24 Dry Input CM500-EXPC $750 $70

Network Switch PricingNSD Configurations Part Number

5-Port Network Switch DIN-Rail Mount NSD-05 $250 $258-Port Network Switch DIN-Rail Mount NSD-08 $295 $3016-Port Network Switch DIN-Rail Mount NSD-16 $450 $45- with K03 Kit (DIN-Rail and Power Supply) K03 add $50- with K03 & EN2 Enclosure (10x6x6 screw top) EN2 add $330

24-Port Network Switch Rack Mount NSR-24 $475 $5048-Port Network Switch Rack Mount NSR-48 $575 $60

Stand Alone Point Monitoring

For Sales Contact:

[email protected]

740.936.5362

MSRP Warranty

295 30

350 35

550 50

Part Number

MS0-RS24 (RS232 to RS485)

The MS0-RS24 is a commercial and industrial grade converter designed to

convert RS-232 to RS-485 full-duplex signals. The RS-232 interface is a standard

DB9 female connector and the RS-485 offers a screw-terminal block for easy

connectivity. Automatic Send Data Control is enabled which means no software

drivers are needed in order to incorporate with any Point-to-point and point-to-

multipoint networks.

With its surge protected interfaces to protect your equipment, data and the

converter itself against high voltage surges, this converter is suitable for most

industrial, commercial, office, lab and network applications.

Description: RS-232 to RS-485 converter, DIN-Rail or screw mount

Description

Serial to RS-485 (typically Modbus)

- with K01 Kit (DIN-Rail, Outlet and XFMR)

- with K01 & EN2 Enclosure (10x6x6 screw top)

MS0-RS24

Application Example:

Part Number Example: MS0-RS24-K01-EN2

EN2

K01


(740) 936.5362 [email protected]


MSRP Warranty

Serial to Network 425 40

Modbus RTU to Modbus TCP 425 40

Liebert IGM (RS-422) to IGM (IP) 425 40

- with K01 Kit (DIN-Rail, Outlet and XFMR) 475 50

- with K01 & EN2 Enclosure (10x6x6 screw top) 750 75

MS0 (RS-485 to IP)Description: Serial Protocols to TCP/IP, DIN-Rail or screw mount

The MS0 is designed to transform serial to network protocols. The MS0 is

designed to connect to devices (native protocol) via physical connections of EIA-

232, EIA-422, EIA-485 (2-wire or 4-wire, serial ) and transform to TCP/IP

(network).

Protocols Supported:

* STD firmware supports true serial to TCP/IP conversion - generally good for

terminal sessions and Generac applications.

* MBT firmware supports Modbus 485 to Modbus TCP/IP conversion normally

associated to power equipment.

* IGM firmware supports Liebert IGM devices (generally 2 are required). Allows

users to extend IGMnet communications over the network, eliminating twisted-

pair wiring.

Description Part Number

K01

EN2

MS0-STD

MS0-MBT

MS0-IGM





MSRP Warranty

Modbus RTU/TCPIP to BACnet IP to SNMP 850 85

- with K03 Kit (DIN-Rail and Power Supply) 950 95


MS0-MBSDescription: Modbus, BACnet IP, SNMP Converter DIN-Rail Mount

The MS0-MBS provides stand–alone protocol transformation between Modbus

RTU / TCP, BACnet IP and SNMP based systems. Each protocol can be

configured as a client or a server, allowing users to access and share

information from differing devices or systems.

The MSO-MBS has two physical communication ports—one 10/100 Mbps

Ethernet/IP port, and another optically isolated RTU (EIA-485) port.

The device is configured through it’s web interface, where all communication

parameters can be viewed and set. Up to 500 objects are supported with a

single MS0-MBS


MS0-MBS

K03

EN2





MSRP Warranty

Modbus RTU to LON 850 85



MS0-MBSDescription: Modbus, BACnet IP, SNMP Converter DIN-Rail Mount

The MS0-MRL provides standalone protocol transformation between Modbus

RTU and Lon based systems. In most circumstances, the fundamental device is

Modbus RTU capable and is required to talk to a Lon based network. However

the MS0-ML can also be used to transform Lon protocol to Modbus RTU.

The MS0-MRL has two physical optically isolated communication ports—one

EIA-485 Modbus RTU port, and another TP/FT-10 Lon port.

DIN Rail mounting and flexible input power requirements makes the MS0-MRL

suitable for most applications.

The device is configured via USB and specific application software, where all

communication parameters can be viewed and set. Up to 400 Modbus

registers / Lon Network Variables are supported with a single MS0-MRL.


MS0-MRL

K03

EN2





MSRP Warranty

BACnet MSTP to IP (BACnet Router) 625 60



MS0-BRDescription: BACnet MSTP to BACnet TCP/IP Router DIN-Rail Mount

The MS0-BR provides stand–alone routing between BACnet networks such as

BACnet IP, BACnet MSTP, and BACnet Ethernet—thereby allowing integration

to a mixture of network topologies in order to accommodate the host BACnet

system. The device also supports BBMD and FDR (Foreign Device Registration).

The MSO-BR has two physical communication ports—one 10/100 Mbps

Ethernet/IP port, and another optically isolated MSTP (EIA-485) port.

The device is configured through it’s web interface, where all communication

parameters can be viewed and set.

The device also supports redundant power supply inputs for critical

applications.


MS0-BR

K06

EN2





MSRP Warranty

Generac Serial to Modbus TCP 425 40

Generac Serial to Generac IP 425 40

- with K01 Kit (DIN-Rail, Outlet and XFMR) 475 50


MS0 for GeneracDescription: Serial to IP interfaces for Generac Generators

The MS0-GNC is designed to transform serial to network protocols.

The MS0-GNC is designed to connect to Generac generators via physical

connection of EIA-232 (serial) and transform to Modbus TCP/IP (network).

The MS0-GNC assemble comes with a specialized serial cable ( 9-pin to 25- pin)

to accommodate Generac specific communications.

The MS0-GNC is powered by the generators battery voltage for continuous

uptime. Simple setup on the generator controls ensures virtual plug-and-play

operation.


MS0-GNM

MS0-GNS

K01

EN2





MSRP Warranty

MS1 for 16 Devices 1850 180







MS3-DT-XXYY-128

Data Transformation Application for MS1, MS2 & MS3Description: Large-scale protocol conversion for any Modbus, BACnet or SNMP device

A clear understanding of protocols for IT (NMS), Facilities (BMS) equipment and

their interaction with software is essential to the success of any consolidated

monitoring system. Data Transformation goes beyond simply converting one

protocol to another, but rather true transformation occurs when the device

looks, acts and feels like it belongs in the native system.

The MicroServer product line provides large scale protocol conversion for 16 /

32/ 64 / 128 and 247 devices.

Reference the chart below to help choose the right hardware platform to fit

your requirements.


MS1-DT-XXYY-16

MS1-DT-XXYY-32

MS2-DT-XXYY-32

MS2-DT-XXYY-64

MS3-DT-XXYY-64

MS3-DT-XXYY-247





MSRP Warranty








MS3-DM-128

Data Monitoring Application for MS1, MS2 & MS3Description: Monitoring and Event Management for any Modbus, BACnet or SNMP unit

Pythia Technologies data monitoring platform provides the fundamental

components of data center management and is one of the only products in the

marketplace to seamless integrate all Facilities and IT equipment into a single

system. Extended capabilities like smart phone and iPad integration means

that you will never be out of touch with your operations.

Standard Features include:

* Web Browser agnostic user interface

* No proprietary tool

* Interface to any Modbus, BACnet or SNMP device

* Trend Data warehousing

* Full XML inteface for any data point or trend value

* Custom Reports are available


MS1-DM-16

MS1-DM-32

MS2-DM-32

MS2-DM-64

MS3-DM-64

MS3-DM-247





MSRP Warranty

5-Port Network Switch DIN-Rail Mount 250 25



- with K03 Kit (DIN-Rail and Power Supply) add $50 0

- with K03 & EN2 Enclosure (10x6x6 screw top) add $330 0

24-Port Network Switch Rack Mount 475 50

48-Port Network Switch Rack Mount 575 60


Custom enclosure with (5) Web / SNMP Adapter cards mounted to a bracket. The network is consolidated with

an NSD-08, providing one network connection to the customers network

NSR-48

NSR-24

Network Switches 10/100Mbps DIN-Rail & Rack MountDescription: High Performace Network Switches

The NSD-x is designed for DIN-rail mounted applications. The device is housed

in a rugged metal enclosure suitable for most applications. All ports

automatically configure their data rate and duplex using the Auto-Negotiation

protocol. Each port will accommodate either a straight through or cross-over

cable by using the Auto-MDIX protocol. The NSD is available in 5, 8 and 16 port

configurations

The NSR-Series Switches are an affordable smart switch that combines powerful

network performance and reliability with the essential network management

features. These Ethernet switches provide basic management, security, and

quality-of-service (QoS) features. And with an easy-to-use web user interface,

you can deploy and configure a rock-solid network in minutes.

The NSR is available in 24 and 48 port configurations


NSD-05

NSD-08

NSD-16

K03

EN2




MSRP Warranty

500 50

500 50

590 60

* with K03 & EN2 Enclosure (10x6x6 screw top) 700 70

0

CM04

K03

EN2

* with K03 Kit (DIN-Rail and Power Supply)


Contact Modules CM03 & CM04Description: Contact and Analog sensor monitoring for BMS type systems

The CM03 and CM04 are general purpose modules designed to integration to

most equipment throughout the data center. Each analog input can be jumper

configured for 0-5V, 0-20mA, or dry contact. Relay outputs are controlled

through software external to the module and are rated for 2A @ 120VAC.

The modules are slave devices that can be easily controlled via the RS485 serial

interface using the industry standard Modbus Protocol. Standard DIN Rail

mounting allows for a wide variety of mounting options.

Highlights:

• CM03 - 32 Univeral Inputs

• CM04 - 8 Universal Inputs & 13 dry-contact relay outputs

• Communication Output: Modbus RTU Protocol via RS485


Key-hole Mount 8-Dry, 4 Analog, 1 Relay, Leak cable

8 Univ input / 13 relay out




MSRP Warranty

895 90

175 20

Contact Module CM50Description: Contact and Analog sensor monitoring for NMS and BMS type systems

Standard Features include:

Simple installation and setup. Web-accessible with a clean, easy to use, mobile-

friendly web interface. Monitors eight dry contact inputs and four temperature

or temperature/humidity sensors, plus one zone of leak detection. Single zone

leak detection supports up to 200’ of sensing cable and spot detectors. USB

power - run the CM50 from a wall outlet via included adapter or a USB port on

a computer. Multiple alarm notification configurations including audible and

visible indicators, integrated web interface, email messaging, and SNMP traps.

Relay output allows for simple control of an external device upon alarm

condition. Modbus TCP output enables simple integration to a Building

Management System (BMS). SNMP integration for Network Management

Systems (NMS). Integrated logging and trending, including CSV downloadable

trending data.


Key-hole Mount 8-Dry, 4 Analog, 1 Relay, Leak cable CM50

Rack Mount Bracket CM50-RMB





MSRP Warranty

3200 250

3500 275

1250 100

750 70

Expandable Contact Module CM500Description: Contact and Analog sensor monitoring for NMS and BMS type systems

The CM500 is a self-contained solution, providing a single integrated view of all

connected equipment. Onboard features include data trending and extended

logging, interactive graphical facility mapping, PUE/DCiE monitoring and IP

device (URL links) to other devices.

The CM500 consists of the base unit and optional expansion cards. The CM500

monitors analog and dry contact data from devices such as temperature and

humidity sensors, relays, smoke detectors, fire suppression systems,

surveillance products (IP cameras), leak detection systems, power monitoring

systems, uninterruptible power supplies (UPSs), power distribution units

(PDUs), generators, DC power plants, commercial power, HVAC units, ATS,

TVSSs and other associated equipment.

The CM500 supports Modbus, BACnet and SNMP protocols and is capable of

simultaneously integrating into an existing network management system (NMS)

or building management system (BMS).


1U Rack Mount 8 Dry Inputs - Expandable CM500-1U

2U Rack Mount 8 Dry Inputs - Expandable CM500-2U

Accessories

CM500 Expansion Card 12-Universal, 8 Relay Output

CM500 Expansion Card 24 Dry Input

CM500-EXPA

CM500-EXPC





Documents

MSRP Price Book - Pythia Technologies · Liebert IGM (RS-422) to IGM ... Configurations Part Number MSRP Warranty ... Reference the chart below to help choose the right hardware platform