MUELLER LINESEAL III , LINESEAL XP , LINESEAL XPII 11.1

11.1

❏ Chevron V-Type Packing-isself-adjusting,longlastingandshouldneverneedreplacementbecausequarter-turnvalveoperationcauseslittleornowear.Packingbearsonturned,groundandpolishedstainlesssteel.

❏ Corrosion Resistant Shaft-isconstuctedofstainlesssteel.Shaftisone-piece,through-shaftconstructionsizedtomeetorexceedrequirementsofAWWAStandardC504forClass150BorClass250Bservice.

❏ Heavy-Duty Body-isextraheavywithflangesfullyfacedanddrilledperANSIB16.1Class125standard**.Otherendsavailableincludeintegrallycastmechanicaljointandslip-on(forDIandPVCC900).Operatormountingtrunnionismachinedanddrilledforfour-boltconnection.

❏ Tamper-Proof Disc Centering-providedbyprecisionmoldedflatsinthebondedseatatthebodytrunnionmatewithmachinedflatsonthedisctoprovidetamperproofcenteringofthediscinthebody.Positivediscalignment,withoutplay,assureslongseatlife.

Mueller LINESEAL III® (Class 150B), LINESEAL XP™*, LINESEAL XPII® (Class 250B), and LINESEAL 350® (Class 350B) Butterfly Valve Features

*Lineseal XP™ Valves 3" and 4" only.**Lineseal XP™ and Lineseal 350 Valve flanges drilled to ANSI B16.1 Class 250 standard.

❏ Self-Lubricating Bearings-areliberallysized,chemicallyinertbearingsthatareself-lubricatingandshouldoutlastthelifeofthepipeline.

❏ Streamlined Disc-haslens-shapeddesigntominimizepressuredropandturbulence.Fullopenvalvecreatesnomorefrictionlossthana45˚elbow.Discissecuredtotheshaftbystainlesssteelpinssizedtotransmittorquesrequiredandwithstandstressesimposedundersevereoperatingconditions.Dischasstainlesssteeldiscedge.

❏ Elastomeric Body Seat-ismadeofaspecialrubbercompound(BunaN)thatisbondedtothebodybyapatentedprocess.Theseatcannotbetornfromthebodyundernormalpipelineconditions.Theprecisionmoldingprocessalsoensuresthatthedisc-seatindentationcannotcauseexcessivewearorabrasionuponclosing.

MUELLER® LINESEAL III®, LINESEAL XP™, LINESEAL XPII®, LINESEAL 350® BUTTERFLY VALVES 3"-20" DESIGN*

ShadedareaindicateschangeRev.8-17

11.2

Mueller LINESEAL III® (Class 150B), LINESEAL XP™, LINESEAL XPII® (Class 250B), & LINESEAL 350® (Class 350B) Butterfly Valve Features

* Contact your Mueller representative for valves sizes larger than 48"and for Lineseal XP and Lineseal 350 Valves with Class 250 flanges, this page applies to 24"-48" sizes.

❏ Corrosion Resistant Shaft-isconstuctedofstainlesssteel.Two-piece,stub-typeshaftsaresizedperAWWAStandardC504,Class150BorClass250.

❏ Chevron V-Type Packing -isself-adjustingpackingintoptrunnionofvalvebodywhereshaftprotrudes.

❏ Strong Disc & Shaft Connections-withgenerouslysizedstainlesssteelpinsdesignedtotransmittorquesrequiredandwithstandstressesimposedundersevereoperatingconditions.

❏ Preset Two-Way Thrust Bearing Assembly-ispresetatfactory.Onvalves30"andlarger,assemblyconsistsofstainlesssteelstudfastenedtothebottomofthevalveshaft.Studextendsbeyondthebottomcover.Thrustcollaristhreadedtothestudandpinned.On24"valvesthrustcollarispinnedtoshaftandadjustmentprovidedbybronzespacers.Thrustcollarcavityispackedwithgreaseandfullygasketedtopreventleakage.

❏ Heavy-Duty Body-isextraheavywithflangesfullyfacedanddrilledperANSIB16.1Class250orMechanicalJointendsarealsoavailable.

❏ Self-Lubricating, Sleeve-Type Bearings-areusedinbothtrunnionsofthevalvebody.PTFElinedwithspecialnon-metallicbacking.Provideelectricalinsulationbetweendiscandshafttopreventgalvaniccorrosion.Lowercoefficientoffrictionreducesoperatingtorquerequirements.

❏ Flow-Through Disc*-provideslesspressuredropinfull-openpositionthanconventionaldiscshapes.(On24"sizevalvesthearchsideofdiscisclosedandtheflatsideisopen,formingaslightlyconcavesurface.)Discstructurehasnointernalcoresthatcanshiftduringcasting,nohollowchambersthatcancollectwater,freezeandfracturethedisc.Discedgehasstainlesssteelsphericallyshapedseatingsurface.

❏ Elastomeric Body Seat-ismadeofaspecialrubbercompound(BunaN)thatsealsafull360againstastainlesssteelsphericaldiscedge.Uniquegrooved-sealdesign,coupledwiththewidesphericallyshapedseatingedgeofthedisc,allowsgreaterdiscclosuretolerance(upto1˚offcenterinclosedpositionwithoutleakage).Seatismechanicallyretainedinbodywithoutmetalhardwarebyacastepoxycompoundthatensurestheseatconformstotheexactradiusofthediscwithuniformcontactpressure.Itisfullyfieldadjustableandreplaceable.

MUELLER® LINESEAL III®, LINESEAL XP™, LINESEAL XPII®, LINESEAL 350® BUTTERFLY VALVES 24"-48" DESIGN

Rev.8-17Shadedareaindicateschanges

11.3

❏ Handleverfor3"-10"valves

❏ 200psitest

❏ EPDMRubberseatandseals

❏ 316Stainlesssteelfasteners

❏ Catalognumber3211-6FlangedEndsClass125 Sizes--3",4",6",8",10",12",14",16",18",20",24",30",36",42",48"3211-20Mechanicaljointends(withmechanicaljointunassembledaccessories) Sizes--4",6",8",10",12",14",16",18",20",24",30",36",42",48"3211-23Mechanicaljointends(withoutmechanicaljointaccessories) Sizes--4",6",8",10",12",14",16",18",20",24",30",36",42",48"3211-16FlangedClass125bymechanicaljointends(withmechanicaljointunassembledaccessories) Sizes--6",8",10",12",14",16",18",20",24",30",363211-19FlangedClass125bymechanicaljointends(withoutmechanicaljointunassembledaccessories) Sizes--6",8",10",12",14",16",18",20",24",30",36

❏ MeetsorexceedsallapplicablerequirementsofANSI/AWWAC504StandardClass150B;NSF61certified

❏ Buriedservicevalves:I.D.andO.D.coated

❏ Body-CastIronASTMA-126

❏ FlangesdrilledperANSIB16.1Class125

❏ Abovegroundvalves(orderedwitheitherahandwheel,positionindicatorontheactuator,orlever):minimum8millsepoxycoatedinteriorandexterior;meetsAWWAC504standard.

❏ Seat-in-bodydesignreducesseatfailureduetocorrosivebuildupinthevalveandpipeline

❏ Through-discpinningprovidesatightdisc-to-shaftpinconnection,greatlyreducingthepossibilityoflooseningthroughvibration

❏ Discedgeis316StainlessSteel

❏ Disc–StainlessSteelASTMA-351(3”-6”);CastIronASTMA-126(8”-20”);DuctileIronASTMA-536(24”-48”)

❏ SymmetricaldiscforhigherCvandlowerheadloss

❏ Nonmetallicbearingspreventgalvaniccorrosionandprovideslowercoefficientoffriction

❏ Cheveron"V"typepackingisself-adjustingtolastthelifeofthevalve

❏ 3"-24"Standard304SShardware.

Standard Buried Service ActuatorsNote: Actuator size subject to change based on actual pipeline conditions.

Options ❏ MDTActuatorwithhandwheel

orchainwheelandpositionindicator

❏ MDTActuatorwithcylinderactuator(alsoavailablewithmanualoverride,handjackand4-waysolenoidvalve)

❏ AdditionalmilsavailableEpoxyinteriorand/orexterior

❏ Holidaytesting

❏ Groundlevelpositionindicator

Slotted-Lever (3"-12")

*ContactyourMuellerrepresentativeforvalvesizeslargerthan48".

3"-20"

30"-48"

Valve size Actuator Number of turns3"-12" MDT-2S 3214"-16" MDT-3S 3018"-24" MDT-4S 4030"-36" MDT-5 4442" MDT-5S 13648" MDT-6S 215

MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 3" - 48"*


11.4 MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 3"-48"*-FLANGED ENDS

Dimensions - for Lineseal III® Valves Flanged (Class 125) Ends, 3"-20" Sizes.

Dimensions - for Lineseal III® Valves Flanged (Class 125) Ends, 24"-48" Sizes.

* Larger sizes available upon request. + All dimensions are in inches. † -+1/16" for 10" valves, and -+1/8" for 12"-48" valves per Flange Standard ANSI B16.1.

Notes: These dimensions are correct at time of publication but are not to be construed as certified drawings. Certified drawings available upon request. Actuator size subject to change based on actual pipeline conditions.

Dimension+Nominal size*

3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 4.75 5.50 6.50 7.75 9.00 10.5 11.88 13.50 14.38 16.00 18.63 21.50 25.44 29.88 34.06

B 3.88 4.13 5.13 6.50 9.88 11.38 12.63 14.50 15.38 17.00 18.63 24.38 28.25 32.88 37.13

C 7.50 9.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 38.75 46.00 53.00 59.50

D† 5.00 5.00 5.00 6.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 12.00 12.00 12.00 15.00

E .75 .94 1.00 1.13 1.19 1.25 1.38 1.44 1.56 1.69 1.88 2.13 2.38 2.63 2.75F(numberandsizeofholes) 4--.63 8--.63 8--.75 8--.75 12--.88 12--.88 12--1 16--1 16--1.13 20--1.13 20--1.25 28--1.25 32--1.50 36--1.50 44--1.50

G 6.00 7.50 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 29.50 36.00 42.75 49.50 56.00

J 4.69 4.69 4.69 4.69 4.69 4.69 5.63 5.63 6.38 6.38 6.38 7.56 7.56 8.31 9.88

L 2.00 2.00 2.00 2.00 2.00 2.00 2.44 2.44 2.84 2.84 2.84 3.47 3.47 3.94 5.06

Q 4.50 4.50 4.50 4.50 4.50 4.50 5.38 5.38 6.75 6.75 6.75 10.00 10.00 15.94 14.19

R 8.25 8.25 8.25 8.25 8.25 8.25 10.38 10.38 11.31 11.31 11.31 17.00 17.00 19.88 26.50

Turnstoopen 32 32 32 32 32 32 30 30 40 40 40 44 44 136 215

Actuator(seenotes) MDT-2S MDT-2S MDT-2S MDT-2S MDT-2S MDT-2S MDT-3S MDT-3S MDT-4S MDT-4S MDT-4S MDT-5 MDT-5 MDT-5S MDT-6S


11.5MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 6"-20" - M.J. X FL.

Dimensions - for Lineseal III® Valves Mechanical Joint by Flange (Class 125) Ends, 6"-20" Sizes.

+ All dimensions are in inches.


Dimension+Nominal size

6" 8" 10" 12" 14" 16" 18" 20"

A 6.50 7.75 9.00 10.50 11.88 13.50 14.38 16

B 5.13 6.50 9.88 11.38 12.75 14.38 15.25 16.88

C 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50

CC 11.00 13.25 15.56 17.94 20.31 22.56 24.69 27.09

D† 6.75 7.31 8.62 8.63 9.75 10.00 10.13 10.25

DD 4.25 4.31 4.62 4.63 5.75 6.00 6.13 6.25

E 1.06 1.13 1.25 1.25 1.38 1.44 1.56 1.69

EE 1.06 1.13 1.19 1.25 1.31 1.38 1.44 1.50

F(numberandsizeofholes) 8--.75 8--.75 12--.88 12--.88 12--1.00 16--1.00 16--1.13 20--1.13FF(numberandsizeofholes) 6--.75 6--.75 8--.75 8--.75 10--.75 12--.75 12--.75 14.75

G 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00

GG 9.50 11.75 14.00 16.25 18.75 21.00 23.25 25.50

J 4.69 4.69 4.69 4.69 5.63 5.63 6.38 6.38

L 2.00 2.00 2.00 2.00 2.44 2.44 2.84 2.84

Q 4.50 4.50 4.50 4.50 5.38 5.38 6.75 6.75

R 8.75 8.25 8.25 8.25 10.38 10.38 11.31 11.31

X 4.25 4.81 6.13 6.13 6.25 6.50 6.63 6.75

Turnstoopen 32 32 32 32 30 30 40 40

Actuator(seenotes) MDT-2S MDT-2S MDT-2S MDT-2S MDT-3S MDT-3S MDT-4S MDT-4S


11.6 MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 4"-48" - M.J. ENDS

Dimensions - for Lineseal III® Valves M.J. Ends, 4"-20" Sizes.

Dimensions - for Mueller Lineseal III® Butterfly Valves M.J. Ends, 24"-48" Sizes.

+ All dimensions are in inches.



4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 5.50 6.50 7.75 9.00 10.50 11.88 13.50 14.38 16.00 18.63 21.50 25.44 29.88 34.06

B 4.13 5.13 6.50 9.75 11.38 12.75 14.50 15.38 17.00 18.38 24.13 28.00 32.75 36.88

C 9.00 11.00 13.25 15.56 17.94 20.31 22.56 24.69 27.09 31.56 39.00 45.88 53.00 59.88

D 8.13 8.50 8.63 9.25 9.25 11.50 12.00 12.25 12.50 13.25 18.00 22.00 22.00 24.00

E 1.00 1.06 1.13 1.19 1.25 1.31 1.38 1.38 1.50 1.63 1.81 2.00 2.00 2.00F(numberandsizeofholes) 4--.75 6--.75 6--.75 8--.75 8--.875 10--.875 12--.875 12--.875 14--.875 16--.875 20--1.13 24--1.13 28--1.38 32--1.38

G 7.50 9.50 11.75 14.00 16.25 18.75 21.00 23.25 25.25 30.00 36.88 43.75 50.63 57.50

J 4.69 4.69 4.69 4.69 4.69 5.63 5.63 6.38 6.38 6.38 7.56 7.56 8.31 11.19

L 2.00 2.00 2.00 2.00 2.00 2.44 2.44 2.84 2.84 2.84 3.47 3.47 3.94 5.06

Q 4.50 4.50 4.50 4.50 4.50 5.44 5.44 6.75 6.75 6.75 10.13 10.13 15.94 18.56

R 8.25 8.25 8.25 8.25 8.25 10.38 10.38 11.31 11.31 11.31 17.00 17.00 19.88 26.50

X 3.12 3.50 3.63 4.25 4.25 4.50 5.00 5.25 5.50 6.38 10.00 14.00 14.00 16.00

Turnstoopen 32 32 32 32 32 30 30 40 40 40 44 44 136 215

Actuator(seenotes) MDT-2S MDT-2S MDT-2S MDT-2S MDT-2S MDT-3S MDT-3S MDT-4S MDT-4S MDT-4S MDT-5 MDT-5 MDT-5S MDT-6S


11.7MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 12", 16" - SL. X FL.

Dimensions - for Lineseal III® Valves Slip-on by Flanged Ends (Class 125), 12", 16" Sizes.

+ All dimensions are in inches. IMPORTANT:1. Slip On end of this valve NOT FOR USE with IPS O.D. Pipe. 2. Slip On end of this valve for use with Tyton™ Rubber Ring Gasket (Tyton is a registered Trade Mark of U.S. Pipe & Foundry Co.).



12" 16"

A 10.50 13.50

B 11.38 13.88

C(Sliponend) 16.38 21.25

CC(Flangedend) 19.00 23.50

D 11.50 11.50

DD 4.00 4.00

E 1.25 1.44

F(numberandsizeofholes) 12--.88 16--1.00

G 17.00 21.25

J 4.69 5.63

L 2.00 2.44

Q 4.50 5.38

R 8.25 10.38

X(Layinglength) 6.56 9.19

Turnstoopen 32 30

Actuator(seenotes) MDT-2S MDT-3S

Pipe size

12" 16"

PipeO.D. 13.20 17.40


11.8 MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 12", 16" - SLIP-ON

Dimensions - for Mueller® Lineseal III® Butterfly Valves Slip-on Ends, 12", 16" Sizes.

+All dimensions are in inches.

IMPORTANT:1. This valve NOT FOR USE with IPS O.D. Pipe.



12" 16"

A 10.50 13.50

B 11.38 14.50

C 16.38 21.25

D 15.00 15.00

J 4.69 5.63

L 2.00 244

Q 4.50 5.38

R 8.25 10.38

X(Layinglength) 5.13 4.75

Turnstoopen 32 30

Actuator(seenotes) MDT-2S MDT-3S

Pipe size

12" 16"

PipeO.D. 13.20 17.40


11.9MUELLER® LINESEAL III® BUTTERFLY VALVES (CLASS 150B) 3"-48"* PARTS

* Contact you Mueller representative for sizes larger than 48".**3", 4", 6" is ASTM A-351 CF8M Stainless Steel.

BF106

BF105

BF100

BF104

BF103

BF102

BF101

BF110

BF104

BF105

BF107

BF108

BF109

BF104

BF111

10" THRU 20"

3" AND 8" VALVES

Catalog Part No. Description Material

BF100 Body CastironASTMA126CL.B

BF101 Disc** CastironASTMA126,ClassBwith316Edge

BF102 Shaft StainlessSteelType304ASTMA-276

BF103 Squeezepin StainlessSteelType304ASTMA-276

BF104 Bearing NylatronGS

BF105 Packing ChevronV-Type

BF106 Key CarbonSteelC-1045

BF107 Cover CastIronASTMA-48Class40

BF108 Lockwasher StainlessSteelType304

BF109 CapScrew StainlessSteelType304

BF110 Seat BunaN

BF111 Plug StainlessSteelType304

BF112 Bearings PTFELined,FiberglassBacked

BF113 Disc DuctileIronASTMA-536Grade65-45-12

BF114 Discedge StainlessSteelType316ASTMA-240

BF115 Topstubshaft StainlessSteelType304ASTMA-276(Standard)StainlessSteelType316ASTMA-276

BF116 Bottomstubshaft StainlessSteelType304ASTMA-276(Standard)StainlessSteelType316ASTMA-276

BF117 Packing BunaN

BF118 Bottomcover CastIronASTMA-48Class40

BF119 Capscrews CarbonSteel

BF120 Squeezepins StainlessSteelType304ASTMA-479

BF121 Thrustcollar StainlessSteelType420

BF122 Thrustcollarshims Bronze

BF123 Springpin StainlessSteelType420

BF124 O-ring BunaN

BF125 Packingretainer Nylon

BF126 Bearings PTFELined,FiberglassBacked

BF127 Disc DuctileIronASTMA-536Grade65-45-12

BF128 Topstubshaft StainlessSteelType304ASTMA-276

BF129 Bottomstubshaft StainlessSteelType304ASTMA-276

BF130 Bottomcover CastIronASTMA-126ClassB

BF131 Bottomcovercap CastIronASTMA-126ClassB

BF132 Taperpins StainlessSteelType630ASTMA-564Cond.H-1150

BF133 Lockwashers StainlessSteelType304

BF134 Hexnuts StainlessSteelType304

BF135 O-rings BunaN

BF136 Thrustbearingstud StainlessSteelType304

BF137 Thrustcollar BronzeASTMB-505AlloyC93200

BF138 Dowelpin AlloySteel

BF139 Bottomcovergasket BlendedFiber,CuredNitrilBinder

BF140 O-ring BunaN

Lineseal III® Butterfly Valve Replacement Parts


11.10

❏ EPDMrubberseatandseals

❏ 304/316StainlessSteelFasteners

❏ Additional4milsminimumEpoxyinteriorand/orexterior

❏ Catalognumber--5227-6Flanged(Class250)Ends;ANSI 250lb Drilling B16.1 Sizes--3",4",6",8",10",12",14",16",18",20",24",30",36",42",48"*

❏ 250psig(1723kPa)maximumworkingpressure

❏ MeetsorexceedsallapplicablerequirementsofANSI/AWWAC504StandardClass250B;NSF61certified

❏ Body-DuctileIronASTMA-536(65-45-12)

❏ Buriedservicevalves:I.D.andO.D.coated

❏ Abovegroundvalves(orderedwitheitherahandwheel,positionindicatorontheactuator,orlever);minimum8millsepoxycoatedinteriorandexterior;meetsAWWAC-504standards.

❏ Seat-in-bodydesignreducesseatfailureduetocorrosivebuildupinthevalveandpipeline

❏ Discedgeis316StainlessSteel

❏ Disc-DuctileIronASTMA-536(65-45-12)(3"-4"StainlessSteelASTMA351CF8M)

❏ Nonmetallicbearingspreventgalvaniccorrosionandprovideslowercoefficientoffriction

❏ Chevron"V"typepackingisself-adjustingtolastthelifeofthevalve

❏ 3"-24"Standard304SShardware.


❏ Holidaytesting


Options❏ MDTActuatorwithhandwheel



Slotted-Lever (3"-8") Link-Lever (10"-48")

Valve size Actuator Number of turns3"-8" MDT-2S 3210"-14" MDT-3S 3016"-18" MDT-4S 4020"-24" MDT-5 4430"-36" MDT-5S 13642"-48" MDT-6S 215

MUELLER® LINESEAL XP™ BUTTERFLY VALVES (CLASS 250B) 3" - 48"*


3" & 4"

30"-48"

6"-24"

11.11


3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 4.75 5.50 7.25 8.50 9.75 11.50 12.75 14.00 15.25 17.00 19.75 25.63 28.13 32.13 36.25

B 3.25 3.50 8.38 9.63 11.00 12.63 13.88 15.13 16.38 17.63 20.25 26.00 31.13 35.13 39.63

C 8.25 10.00 12.50 15.00 17.50 20.50 23.00 25.50 28.00 30.50 36.00 43.00 50.00 57.00 65.00

D 5.00 5.00 6.00 8.00 8.00 8.00 12.00 12.00 12.00 12.00 12.00 12.00 15.00 15.00 15.00

E 1.13 1.25 1.44 1.63 1.88 2.00 2.13 2.25 2.38 2.50 2.75 3.00 3.38 3.69 4.00

F(numberandsizeofholes)**

8--.88 8--.88 12--.88 12--1.00 16--1.12 16--1.25 20--1.25 20--1.38 20--1.38 20--1.38 24--1.62 20--2.00 24--2.25 28--2.25 32--2.25

-- -- -- -- -- -- -- -- 4--1.25 4--1.25 -- 8--1.50 8--2.00 8--2.00 8--2.00

G 6.63 7.88 10.63 13.00 15.25 17.75 20.25 22.50 24.75 27.00 32.00 39.25 46.00 52.75 60.75

J 4.69 4.69 4.69 4.69 5.63 5.63 5.63 6.38 6.38 7.56 7.56 7.56 8.31 11.13

L 2.00 2.00 2.00 2.00 2.44 2.44 2.44 2.84 2.84 3.49 3.49 3.49 3.94 5.06

Q 4.50 4.50 4.50 4.50 5.38 5.38 5.38 6.75 6.75 10.00 10.00 10.00 15.94 14.19

R 8.25 8.25 8.25 8.25 10.38 10.38 10.38 11.31 11.31 17.00 17.00 17.00 19.88 26.50

Turnsto

Open32 32 32 32 30 30 30 40 40 44 44 44 136 215

Actuator(seenotes) MDT-2S MDT-2S MDT-2S MDT-2S MDT-3S MDT-3S MDT-3S MDT-4S MDT-4S MDT-5 MDT-5 MDT-5 MDT-5S MDT-6S

MUELLER® LINESEAL XP™ BUTTERFLY VALVES (CLASS 250B) 3"-48"* - FLANGE ENDS

Dimensions - for Lineseal XP™ Valves - Flange (ANSI B16.1 Class 250) Ends, 3"-48"* Sizes.

+All dimensions are in inches. *Consult your Mueller representative for sizes larger than 48". **Top row: number and size of clearance holes for bolts; bottom row: number and size of threaded holes for studs.

NOTES: These dimensions are correct at time of publication but are not to be construed as certified drawings. Certified drawings are available upon request. Actuator size subject to change based on actual pipeline conditions.

CO

NTA

CT

FAC

TORY

TAPPEDHOLES UNC2BXEDEEPVALVE NO.TAPPEDHOLESSIZE (EACHFLANGE)18"-20" 4(2OVERBOTHSHAFTAREAS)30"-48" 8(4OVERBOTHSHAFTAREAS)


11.12

❏ EPDMrubberseatandseals

❏ 304/316StainlessSteelFasteners

❏ AdditionalmilsavailableEpoxyinteriorand/orexterior

❏ Catalognumber--5227-6Flanged(Class250)Ends*;ANSI B16.1 Class 125 Sizes--3",4",6",8",10",12",14",16",18",20",24",30",36",42",48"*5227-20Mechanicaljointends(withmechanicaljointunassembledaccessories) Sizes--4",6",8",10",12",14",16",18",20",24",30",36",42",48"*5227-23Mechanicaljointends(withoutmechanicaljointaccessories) Sizes--4",6",8",10",12",14",16",18",20",24",30",36",42",48"*

5227-16FlangedxMechanicaljointends(withmechanicaljointaccessories) Sizes--6",8",10",12",14",16",18",20",24",30",36"

5227-19FlangedxMechanicaljointends(withoutmechanicaljointaccessories) Sizes--6",8",10",12",14",16",18",20",24",30",36"

❏ 250psig(1723kPa)maximumworkingpressure❏ MeetsorexceedsallapplicablerequirementsofANSI/AWWAC504StandardClass250B;

NSF61certified❏ Body-DuctileIronASTMA-536(65-45-12)❏ Buriedservicevalves:I.D.andO.D.coated❏ Abovegroundvalves(orderedwitheitherahandwheel,positionindicatorontheactuator,

orlever);minimum8millsepoxycoatedinteriorandexterior.❏ Seat-in-bodydesignreducesseatfailureduetocorrosivebuildupinthevalveandpipeline(24"-48")❏ Discedgeis316StainlessSteel❏ Disc-DuctileIronASTMA-536(65-45-12)(3",4",6"StainlessSteelASTMA351CF8M)

❏ Through-discpinningprovidesatightdisc-to-shaftpinconnection,greatlyreducingthepossibilityoflooseningthroughvibration

❏ SymetricaldiscforhigherCvandlowerheadloss(3"-20")❏ Nonmetallicbearingspreventgalvaniccorrosionandprovideslowercoefficientoffriction

(Only6"&8"valvesfurnishedwithPTFElined,stainlesssteelbackedbearing).

❏ Chevron"V"typepackingisself-adjustingtolastthelifeofthevalve

* Consult your Mueller representative for sizes larger than 48" or for valves with Class 125 flanges.


❏ Holidaytesting


Options❏ MDTActuatorwithhandwheel



Slotted-Lever (3"-8")

3" & 4"

30"-48"

Valve size Actuator Number of turns

3"-8" MDT-2S 3210"-14" MDT-3S 3016"-18" MDT-4S 4020"-24" MDT-5 4430"-36" MDT-5S 13642"-48" MDT-6S 215

MUELLER® LINESEAL XPII® BUTTERFLY VALVES (CLASS 250B) 3" - 48"*

6"-24"


11.13


3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 4.75 5.50 6.50 7.75 9.00 10.50 11.88 13.50 14.38 16.00 18.63 21.50 25.44 29.88 34.06

B 3.25 3.50 5.13 6.50 9.88 11.38 12.75 14.38 15.25 16.88 18.38 24.13 28.00 32.69 36.88

C 7.50 9.00 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 38.75 46.00 53.00 59.50

D 5.00 5.00 5.00 6.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 12.00 12.00 12.00 15.00

E .75 .94 1.00 1.13 1.19 1.25 1.38 1.44 1.56 1.69 1.88 2.13 2.38 2.63 2.75

F(numberandsizeofholes)

4--.63 8--.63 8--.75 8--.75 12--.88 12--.88 12--1.00 16--1.00 16--1.13 20--1.13 20--1.25 28--1.25 32--1.50 36--1.50 44--1.50

G 6.00 7.50 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 29.50 36.00 42.75 49.50 56.00

J 4.69 4.69 4.69 4.69 5.63 5.63 5.63 6.38 6.38 7.56 7.56 8.31 8.31 9.88 9.88

L 2.00 2.00 2.00 2.00 2.44 2.44 2.44 2.84 2.84 3.47 3.47 3.47 3.47 5.06 5.06

Q 4.25 4.25 4.25 4.25 5.38 5.38 5.38 6.75 6.75 10.00 10.00 15.94 15.94 14.19 14.19

R 8.25 8.25 8.25 8.25 10.38 10.38 10.38 11.31 11.31 17.00 17.00 19.88 19.88 26.50 26.50

TurnstoOpen 32 32 32 32 30 30 30 40 40 44 44 44 136 215 215

Actuator(seenotes) MDT-2S MDT-2S MDT-2S MDT-2S MDT-3S MDT-3S MDT-3S MDT-4S MDT-4S MDT-5 MDT-5 MDT-5 MDT-5S MDT-6S MDT-6S

MUELLER® LINESEAL XPII® BUTTERFLY VALVES (CLASS 250B) 3"-48" - FLANGE ENDS

Dimensions - for Lineseal XPII® Valves - Flange (ANSI B16.1 Class 125) Ends, 3"-48"* Sizes.




11.14 MUELLER® LINESEAL XPII® BUTTERFLY VALVES (CLASS 250B) 4"-48" - M.J. ENDS

Dimensions - for Lineseal XPII® Valves - Mechanical Joint Ends, 4"-48" Sizes.



consult installation instructions supplied with valve for specific

installation procedures.

CAUTION

Dimension+Nomnal Size

4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 5.50 6.50 7.75 9.00 10.50 11.88 13.50 14.38 16.00 18.63 21.50 25.44 29.88 34.06

B 3.50 5.13 6.50 9.88 11.38 12.75 14.38 15.25 16.88 18.38 24.13 28.00 32.75 36.88

C 9.00 11.00 13.25 15.56 17.94 20.31 22.56 24.69 27.09 31.56 39.00 45.88 53.00 59.88

D 8.13 8.50 8.63 9.25 9.25 11.50 12.00 12.25 12.50 13.25 18.00 22.00 22.00 24.00

E 1.00 1.00 1.13 1.19 1.25 1.31 1.38 1.38 1.50 1.63 1.81 2.00 2.00 2.00

F(numberandsizeofholes 4--.75 6--.75 6--.75 8--3/4 8--.75 10--.75 12--.75 12--.75 14--.75 16--.75 20--1.00 24--1.00 28--1.25 32--1.25

G 7.50 9.50 11.75 14.00 16.25 18.75 21.00 23.25 25.50 30.00 36.88 43.75 50.63 57.50

J 4.69 4.69 4.69 5.63 5.63 5.63 6.38 6.38 7.56 7.56 8.31 8.31 10.19 10.19

L 2.00 2.00 2.00 2.44 2.44 2.44 2.84 2.84 3.47 3.47 3.94 3.94 5.06 5.06

Q 4.25 4.25 4.25 5.38 5.38 5.38 6.75 6.75 10.00 10.00 15.94 15.94 14.19 14.19

R 8.25 8.25 8.25 10.38 10.38 10.38 11.31 11.31 17.00 17.00 19.88 19.88 26.50 26.50

X 3.13 3.50 3.63 4.25 4.25 4.50 5.00 5.25 5.50 6.38 10.00 14.00 14.00 16.00

TurnstoOpen 32 32 32 30 30 30 40 40 44 44 136 136 215 215

Actuator(seenotes) MDT-2S MDT-2S MDT-2S MDT-3S MDT-3S MDT-3S MDT-4S MDT-4S MDT-5 MDT-5 MDT-5S MDT-5S MDT-6S MDT-6S


11.15MUELLER® LINESEAL XPII® BUTTERFLY VALVES (CLASS 250B) 6"-36" - FL x M.J. ENDS

Dimension+Nomnal Size

6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36"A 6.50 7.75 9.00 10.50 11.88 13.50 14.38 16.00 18.63 21.50 25.44B 5.13 6.50 9.88 11.38 12.75 14.38 15.25 16.88 18.63 24.38 28.25C 11.00 13.50 16.00 19.00 21.00 23.50 25.00 27.50 32.00 38.75 46.00CC 11.00 13.25 15.56 17.94 20.31 22.56 24.69 27.09 31.56 39.00 45.88D 6.75 7.31 8.63 8.63 9.75 10.00 10.13 10.25 10.63 15.00 17.00DD 4.25 4.31 4.63 4.63 5.75 6.00 6.13 6.25 6.63 9.00 11.00E 1.06 1.13 1.25 1.25 1.38 1.44 1.56 1.69 1.88 2.13 2.38EE 1.06 1.13 1.19 1.25 1.31 1.38 1.44 1.50 1.63 1.81 2.00F(numberandsizeofholes 8--.75 8--.75 12--.88 12--.88 12--1.00 16--1.00 16--1.13 20--1.13 20--1.25 28--1.25 32--1.50

FF 6--.75 6--.75 8--.75 8--.75 10--.75 12--.75 12--.75 14--.75 16--.75 20--1.00 24--1.00

G 9.50 11.75 14.25 17.00 18.75 21.25 22.75 25.00 29.50 36.00 42.75

GG 9.50 11.75 14.00 16.25 18.75 21.00 23.25 25.50 30.00 36.88 43.75

J 4.69 4.69 5.63 5.63 5.63 6.38 6.38 7.56 7.56 8.31 8.31

L 2.00 2.00 2.44 2.44 2.44 2.84 2.84 3.47 3.47 3.94 3.94

Q 4.25 4.25 5.38 5.38 5.38 6.75 6.75 10.00 10.00 15.94 15.94

R 8.25 8.25 10.38 10.38 10.38 11.31 11.31 17.00 17.00 19.88 19.88

X 4.25 4.81 6.13 6.13 6.25 6.50 6.63 6.75 7.13 11.00 13.00

TurnstoOpen 32 32 30 30 30 40 40 44 44 136 136Actuator(seenotes) MDT-2S MDT-2S MDT-3S MDT-3S MDT-3S MDT-4S MDT-4S MDT-5 MDT-5 MDT-5S MDT-5S

F

Q

LJ

FF

G(BOLT

CIRCLE)

C

EEEDD

D

RGG(BOLT

CIRCLE)

CC

A B

X

FFE EE

DDD

J

F

2 SQ AWWA NUT

SPUR GEAR FURNISHEDON MDT-6S

X

C

G(BOLT

CIRCLE)

4 1/2 MAX

A

Q

R

3 1/2 SPACEREQUIRED FOR

THRUST BEARINGCOVER REMOVAL

GG(BOLT

CIRCLE)

CC

LB

Dimensions - for Lineseal XPII® Valves - Flange Ends x Mechanical Joint Ends 6"-20" Sizes.



Dimensions - for Lineseal XPII® Valves - Flange Ends x Mechanical Joint Ends 24"-36" Sizes.


11.16 MUELLER® LINESEAL 350® BUTTERFLY VALVES 6"-36" - MJ ENDS & 6"-48" - FL ENDS

❏ Catalognumber-- 5227-6FlangedEnds;ANSI 250lb Drilling B16.1 Sizes--6",8",10",12",14",16",18",20",24",30",36",42",48

5227-23MechanicalJointEnds;ANSI 250lb Drilling B16.1 Sizes--6",8",10",12",14",16",18",20",24",30",36"

❏ 350psig(2415kPa/24barg)maximumworkingpressurewithtemperaturesto250°F❏ MeetsorexceedsallapplicablerequirementsofANSI/AWWAC504

StandardClass250B;NSF61/372certified❏ Body-DuctileIronASTMA-536(65-45-12)❏ Availableinsizes6"-48"(FLxFL)&6"-36"(MJxMJ)❏ 17-4stainlesssteelshaft

❏ Disc-DuctileIronASTMA-536(65-45-12)❏ Nonmetallicbearingspreventgalvaniccorrosion&provideslowercoefficientoffriction❏ Chevron"V"typepackingisself-adjustingtolastthelifeofthevalve

Options❏ Manualtravelingnutorwormgear❏ Electricalmotororcylinderactuator

30"-48" (FLxFL)30"-36" (MJxMJ)

❏ Fullrangeofextensions,indicators,positioners,remotecontrols,andotheraccessoriesavailable

❏ Actuatoroptions:Nut;Handwheel;Burriedservice

Dim.Valve Size

6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36"

A 7.25 8.50 9.75 11.50 12.75 14 15.25 17 19.75 25.63 28.13

B 8.38 9.63 13.31 12.63 13.88 15.13 16.38 17.63 20.25 25.50 30.63

C 11.06 13.31 15.63 17.88 20.25 22.50 24.75 27 31.50 39 45.88

D 10 10 10 10 12.50 12.50 13.25 13.25 13.25 18 22

E 1.06 1.13 1.19 1.25 1.31 1.38 1.44 1.50 1.63 1.81 2

F 6-0.75 6-0.75 8-0.75 8-0.75 10-0.75 12-0.75 12-0.75 14-0.75 16-0.75 20-1.13 24-1.13

G 9.50 11.75 14 16.25 18.75 21 23.25 25.50 30 36-0.88 43.75

X 5 5 5 5 5.50 5.50 6.25 6.25 6.25 10 14

Dimensions - 6"-36" Mechanical Joint Ends, Manual Actuator

Dimensions - MDT Manual Actuator Dimensional Data

Dim.MDT Size

MDT-2S MDT-3S MDT-4S MDT-5 MDT-5S MDT-6S

J 4.69 5.63 6.38 7.56 8.31 10.19

L 2 2.44 2.84 3.47 3.94 5.06

M 2.13 3.25 3.38 4.50 5.50 7

N 2 3.16 4 5.50 3.63 8.25

P 4.50 5.63 7.31 8.75 10.50 12.63

Q 4.25 5.38 6.75 10 15.94 18.56

R 8.25 10.38 11.31 17 18.63 26.50

#TurnstoClose 32 30 40 44 136 215

NOTES:• All dimensions shown are in inches• Furnished in standard positionContact factory for other mounting positions


6"-24" (FLxFL)6"-24" (MJxMJ)

11.17ShadedareaindicateschangeRev.8-17

MUELLER® LINESEAL 350® BUTTERFLY VALVES 6"-48" - FL ENDS

Dimensions - 6"-48" Flanded Ends - Manual Actuator

Dimensions - 6"-48" Flanded Ends - Burried Service Actuator

DimensionValve Size

6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 7.25 8.50 9.75 11.50 12.75 14 15.25 17 19.75 25.63 28.13 32.13 36.25

B 8.38 9.63 11 12.63 13.88 15.13 16.38 17.63 20.25 26 31.13 35.13 39.63

C 12.50 15 17.50 20.50 23 25.50 28 30.50 36 43 50 57 65

D 6 8 8 8 12 12 12 12 12 12 15 15 15

E 1.44 1.63 1.88 2 2.13 2.25 2.38 2.50 2.75 3 3.38 3.69 4

F 12-0.75 12-0.88 16-1.00 16-1.13 20-1.13 20-1.25 24-1.25 24-1.25 24-1.50 28-1.75 32-2.00 36-2.00 40-2.00

G 10.63 13 15.25 17.75 20.25 22.50 24.75 27 32 39.25 46 52.75 60.75

DimensionValve Size

6" 8" 10" 12" 14" 16" 18" 20" 24" 30" 36" 42" 48"

A 7.25 8.50 9.75 11.50 12.75 14 15.25 17 19.75 25.63 28.13 32.13 36.25

B 8.38 9.63 11 12.63 13.88 15.13 16.38 17.63 20.25 26 31.13 35.13 39.63

C 12.50 15 17.50 20.50 23 25.50 28 30.50 36 43 50 57 65

D 6 8 8 8 12 12 12 12 12 12 15 15 15

E 1.44 1.63 1.88 2 2.13 2.25 2.38 2.50 2.75 3 3.38 3.69 4

F 12-0.75 12-0.88 16-1.00 16-1.13 20-1.13 20-1.25 24-1.25 24-1.25 24-1.50 28-1.75 32-2.00 36-2.00 40-2.00

G 10.63 13 15.25 17.50 20.25 22.50 24.75 27 32 39.25 46 52.75 60.75

11.18Rev.10-17Shadedareaindicateschanges

* Contact your Mueller representative for sizes larger than 48".

BF106

BF117

BF100

BF112

BF103

BF102

BF101

BF110

BF112

BF105

BF107

BF108

BF109

BF111

BF112

3” and 4” XP10"–20" XPII

3"–8" VALVES XPII

BF157

BF150

BF126

BF134

BF133

BF100 BF126

BF114

BF153

BF145

BF119 BF156

BF130

BF154

BF117

BF125

BF110

BF132

BF135

BF127

BF151

24” XPII VALVES

Catalog Part No. Description MaterialBF100 Body DuctileIronASTMA-536(65-45-12)

BF101 Disc DuctileIronASTMA-536(65-45-12),EdgeType316StainlessSteel(3"and4"CastStainlessSteelGradeCF8M)

BF102 Shaft StainlessSteelASTMA-564Type630Cond.H-1150

BF103 SqueezePin StainlessSteelASTMA-564Type630Cond.H-1150

BF106 Key SteelAISIC-1045BF107 Cover CastironASTMA-48Class40BF108 Lockwasher StainlessASTMA-276Type304BF109 Capscrew StainlessASTMA-276Type304BF110 Seat BunaN(EPDMoptional)BF111 Plug StainlessSteel

BF112 Bearings PTFELinedStainlessSteelbacked(6"&8",XPIIonly)NylatronGS

BF114 Discedge StainlessSteelASTMA-240Type316BF117 Packing BunaNChevronVTypeBF119 Capscrews StainlessSteelType304BF125 Packingretainer NylonBF126 Bearings PTFELined,FiberglassbackedBF127 Disc DuctileIronASTMA-536Grade65-45-12BF130 Bottomcover CastIronASTMA-126ClassBBF131 Bottomcovercap CastIronASTMA-126ClassBBF132 Taperpins StainlessSteelType630ASTMA-564Cond.H-1150BF133 Lockwashers StainlessSteelType304BF134 Hexnuts StainlessSteelType304BF135 O-rings BunaN(EPDMOptional)BF136 Thrustbearingstud StainlessSteelASTMA-564Type630Cond.H-1150BF137 Thrustcollar BronzeASTMB-505AlloyC93200BF138 Groovepin AlloySteelBF139 Bottomcovergasket NonAsbestosmaterialASTMF104BF140 O-ring BunaN(EPDMoptional)BF150 Topstubshaft StainlessSteelType630ASTMA-564Cond.H1150BF151 Bottomstubshaft StainlessSteelType630ASTMA-564Cond.H1150BF152 SqueezePins StainlessSteelBF153 O-ring BunaN(EPDMOptional)BF154 Thrustcollar BronzeASTMB-505AlloyC93200BF156 Thrustshim BrassAlloyC26000HalfHard(HO2)BF157 Key CarbonSteelANSI1018

Lineseal XP™ & XPII® Butterfly Valve Replacement Parts

BF150BF117

BF125

BF110

BF132BF135

BF106

BF127

BF112BF134

BF133 BF151BF100

BF114

BF140BF130

BF137

BF131

BF119BF138

BF112BF139BF136

30” THRU 48”VALVES

6"-20"XPVALVES

MUELLER® LINESEAL XP™, LINESEAL XPII® & LINESEAL 350® BUTTERFLY VALVES

(CLASS 250B) 3"- 48"*-PARTS

11.19ShadedareaindicateschangeRev.8-17

MUELLER® LINESEAL III®, LINESEAL XP™, LINESEAL XPII®, LINESEAL 350® BUTTERFLY VALVE ORDERING INSTRUCTIONS

1.Quantity:________________________________

2.SizeofValve:____________________________

3.BodyStyle:

_____FLGxFLG(3"-48"ANSIB16.1Class125)


_____MJxMJ(4"-48")

_____FLGxMJ(6"-36")

_____SLPxSLP(12"or16")

_____FLGxSLP(12"or16")

Other:___________________________________Note: MJ valves are supplied without accessory kits standard.

4.Classofvalve_______(150B,250B,or350B)

5.Pleaseprovidethefollowinginformationinadditiontothevalveclass(ifknown)listedinquestion4.PRESSURE:Normal______psigMaximum_____psig

FLOW:Normal_______psigMaximum______psig

6.Typeofservice:Water_____Air______

7.Typeofoperation:_____Handwheel_____Chainwheel_____2"Squarenut____Integraldiscpositionindicator______Extensionstem(stemlength)____

8.Directionofopening:_____Counterclockwise____Clockwise

9.CoatingRequirement*:________milsofAmeron370(4or8standard)

10.NumberofcertificatesofcompliancetoAWWAC504required:____________________________________________________________________________

Ordering Instructions for MUELLER® LINESEAL III ®, LINESEAL XP™, LINESEAL XPII® & LINESEAL 350® Butterfly Valves with Manual Actuators

Pleasenotebelowanyadditionalinformationorrequirementssuchasextendedbonnetsandtorquetubes,floorstandmountedactuators,specialactuatorpositioning,andspecialcoatings.

PLEASEPROVIDEASMUCHDESCRIPTIVEINFORMATIONAND/ORSPECIFICATIONSASPOSSIBLETOENABLEUSTOPROVIDETHEMOSTSUITABLEVALVEFORYOURNEEDS.DONOTHESITATETOATTACHADDITIONALPAGES._______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Accessoryitemsrequired(StemsGuides,GroundLinePositionIndicators,FloorStands,etc.)**

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

*In order to provide valves that meet NSF 61 requirements and certify to that, Ameron 370 will be the paint supplied between 4-24mils thickness. Other paints or mil thickness greater 24 mils will not be NSF 61 compliant. ** Accessory items are listed on pages 11.3, 11.10 and 11.12

11.20

1.Quantity:________________________________

2.SizeofValve:____________________________

3.BodyStyle:



_____MJxMJ(4"-48")

_____FLGxMJ(6"-36")

Other:___________________________________Note: MJ valves are supplied without accessorty kits standard.

4.Classofvalve_______(150B,250B,or350B)

5.Pleaseprovidethefollowinginformationinadditiontothevalveclass(ifknown)listedinquestion4.PRESSURE:Normal______psigMaximum_____psig

FLOW:Normal_______psigMaximum______psig

6.Typeofservice:Water_____Air______

7.MaximumFluidLineTemperature____________°F.

8.DirectionofOpening:CounterClockwise_______Clockwise_______

9.PowersourceAvailable:Volts_____Phase_____HZ_______

10.OperatingTimefromFullOpentoFullClose:Min.________Sec.________

11.EnclosureClassification:Weatherproof_________ExplosionProof__________Submersible_________

12.PushButtonStationRequired:Yes_____No_____

_______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

MUELLER® LINESEAL III®, LINESEAL XP™, LINESEAL XPII®, LINESEAL 350® BUTTERFLY

VALVE ORDERING INSTRUCTIONS

Ordering Instructions for Mueller® LINESEAL III ®, LINESEAL XP™, LINESEAL XPII® & LINESEAL 350® Butterfly Valves with Electric Actuators

13.Accessories:ManualOverride_____LimitSwitches_____Potentiometer_____ReversingStarter________MotorHeater_____ExtendedDutyMotor______Other_________________

14.ValveFunction:Open/Close_______Modulating______

15.Application:Buried________Submerged_____In-plant________AboveGround_________

16.CoatingRequirement*:

________milsofAmeron370(4or8standard)

17.NumberofCertificatesofCompliancetoAWWAC-504required.________________


PLEASEPROVIDEASMUCHDESCRIPTIVEINFORMATIONAND/ORSPECIFICATIONSASPOSSIBLETOENABLEUSTOPROVIDETHEMOSTSUITABLEVALVEFORYOURNEEDS.DONOTHESITATETOATTACHADDITIONALPAGES.___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Accessoryitemsrequired(StemsGuides,GroundLinePositionIndicators,FloorStands,etc.):**________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

*In order to provide valves that meet NSF 61 requirements and certify to that, Ameron 370 will be the paint supplied between 4-24mils thickness. Other paints or mil thickness greater 24 mils will not be NSF 61 compliant. ** Accessory items are listed on pages 11.3, 11.10 and 11.12.


11.21MUELLER® LINESEAL III®, LINESEAL XP™, LINESEAL XPII®, LINESEAL 350® BUTTERFLY VALVE ORDERING INSTRUCTIONS

1.Quantity:___________________________________

2.SizeofValve:________________________________

3.BodyStyle:



_____MJxMJ(4"-48")

_____FLGxMJ(6"-36")

Other:_____________________________________Note: MJ valves are supplied without accessorty kits standard.

4.Classofvalve_______

5.Pleaseprovidethefollowinginformationinadditiontothevalveclass(ifknown)listedinquestion4.PRESSURE:Normal_____psigMaximum_____psigFLOW:Normal_____psigMaximum____psig

6.Typeofservice:Water____Air______

7.CylinderSupplyAvailable:Water____Air____Air/Oil____Oil____

8.MinimumSupplyPressureAvailabletoActuateCylinder:__________________________psig

9.FailSafeSpringReturnRequired?Yes____No____

10.ManualOverrideRequired?Yes____No____

11.Accessories:SpeedControl____Positioner

____Solenoid____LimitSwitches(qty)____Other_______________________________________________________________________________

12.CylinderMaterial:Non-Metallic____Metallic____

13.ValveFunction:Open/Close___Modulating____

14.MaximumFluidLineTemperature_________°F.

15.CoatingRequirement*:

________milsofAmeron370(4or8standard)

16.NumberofCertificatesofCompliancetoAWWAC-504required.______________________


PLEASEPROVIDEASMUCHDESCRIPTIVEINFORMATIONAND/ORSPECIFICATIONSASPOSSIBLETOENABLEUSTOPROVIDETHEMOSTSUITABLEVALVEFORYOURNEEDS.DONOTHESITATETOATTACHADDITIONALPAGES.__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Accessoryitemsrequired(StemsGuides,GroundLinePositionIndicators,FloorStands,etc.):**______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

*In order to provide valves that meet NSF 61 requirements and certify to that, Ameron 370 will be the paint supplied between 4-24mils thickness. Other paints or mil thickness greater 24 mils will not be NSF 61 compliant. **Accessory items are listed on pages 11.3, 11.10, and 11.12.†Please provide Cylinder Specifications if available.

Ordering Instructions for Mueller® LINESEAL III ®, LINESEAL XP™, LINESEAL XPII® & LINESEAL 350® Butterfly Valves with Cylinder Actuators†


11.22

[email protected]


Documents

MUELLER LINESEAL III , LINESEAL XP , LINESEAL XPII 11.1