Embed Size (px)
Citation preview
Pavilion View, Newby Rd
Stockport SK7 5DAT + 44 (0) 161 482 7000
F + 44 (0) 161 482 [email protected]
Multi-feed Soap Dispenser System
The Multi-Feed soap feed system is designed to be used with the Lovair range of sensor operated liquid soap dispensers. The system will simply convert up to 6 standard single-feed dispensers to a system where the same dispensers are all drawing from one reservoir.
Codes
L150038 Multi-feed pump; push-fit connector 1 per dispenser
L150050 Multi-feed soap reservoir with top fill for sensor soap dispensers – up to 6 dispensers
L150051 Sensor operated soap dispenser multi-feed soap reservoir – up to 6 dispensers
L150
038
/ L150050 / L150051 Multi-feed Soap Dispenser System Rev 1–04/
07/1
8
Technical Datasheet
Compatibility
Multi-feed system is to replace single-feed pump and 1 litre reservoir supplied as standard with all sensor operated liquid soap dispensers
Pavilion View, Newby Rd
Stockport SK7 5DAT + 44 (0) 161 482 7000
F + 44 (0) 161 482 [email protected]
L150
038
/ L150050 / L150051 Multi-feed Soap Dispenser System Rev 1–04/
07/1
8
Multi-feed Soap Dispenser System
Technical Data
L150050 – Reservoir – with top-fill hose
Dimensions 224 x 144 x 273mm (reservoir only)
Weight 1.4Kg
Soap feed connection Multi-way cap to accommodate up to 6 dispense supply pipes
Filler cap Chrome plated filler cap to fill tube to be mounted in basin / countertop above reservoir
Fill hose 800mm
Compatible dispensers L699 deck mounted sensor operated dispenser L799 deck mounted sensor operated dispenser L899 deck mounted sensor operated dispenser L460 wall mounted sensor operated dispenser
Technical Data
L150051 – Reservoir
Dimensions 224 x 144 x 273mm
Weight 1Kg
Soap feed connection Multi-way cap to accommodate up to 6 dispense supply pipes
Filler cap Removeable cap on reservoir
Compatible dispensers L699 deck mounted sensor operated dispenser L799 deck mounted sensor operated dispenser L899 deck mounted sensor operated dispenser L460 wall mounted sensor operated dispenser
Technical Data
L150038 – Pump unit
Dimensions 129 x 74 x 103mm
Weight 0.2Kg
Recommended soap viscosity 100-3800cPs For liquid soap only. Not for use with foam soap, alcohol gel or hand sanitizer.
Standard discharge 0.8cc adjustable
Body Black ABS plastic
Power connection Mains power (IP68 rated 12V transformer with push-fit cabling to dispenser)
Soap pipe connection Push-fit connector to soap dispenser head; 3m PVC pipe to connect to reservoir
Compatible dispensers L699 deck mounted sensor operated dispenser L799 deck mounted sensor operated dispenser L899 deck mounted sensor operated dispenser L460 wall mounted sensor operated dispenser
Pavilion View, Newby Rd
Stockport SK7 5DAT + 44 (0) 161 482 7000
F + 44 (0) 161 482 [email protected]
L150
038
/ L150050 / L150051 Multi-feed Soap Dispenser System Rev 1–04/
07/1
8
Multi-feed Soap Dispenser System
Installation requirements
L150050 – Reservoir
Access requirements Allow sufficient space in wall void or under-basin cabinet to conceal reservoir Ensure that filler cap is not obstructed for refilling
Installation requirements
L150051 – Reservoir
Access requirements Allow sufficient space in wall void or under-basin cabinet to conceal reservoir Ensure that reservoir is easily accessible for refilling
Compliance
CE
Related Documents
Installation & maintenance manual email: [email protected]
Warranty document email: [email protected]
Installation requirements
L150038 – Pump unit
Access requirements Pump to be accessible for servicing (access panel to wall void is sufficient)
Power supply Must be installed on its own power circuit to avoid interference from other power demands
Cabling 3 amp fused spur to IP68 rated transformer; low voltage push fit connector to dispenser.
Distance from dispenser See soap dispenser datasheet
Distance from reservoir 3 metres maximum
Pavilion View, Newby Rd
Stockport SK7 5DAT + 44 (0) 161 482 7000
F + 44 (0) 161 482 [email protected]
L150
038
/ L150050 / L150051 Multi-feed Soap Dispenser System Rev 1–04/
07/1
8
273.
5
[694
513 16]
224
[56881116]
[31
1/2"
]80
0 m
m[2
"]51
mm
Recommended hole sizemin Ø 32.5mm[1 1/4"]max Ø 35.2mm[1 3/8']
4
[101
9 16]
Ø44.8
[113734]
144 [3657]
90
[228
55 8]
130
[330
11 2]
273.
5
[694
513 16]
224
[56881116]
144 [3657]
90
[228
55 8]
130
[330
11 2]
1000mm[39 38]
Transformer
4700mm[185 1
16]
3000mm[118 18]TRIM TO FIT
Mains
620mm[24 7
16] 800mm[31 12]
1430mm[52 34]
1430mm[52 34]
150mm[5 29
32]
150mm[5 29
32]
52
[13201316]
30 [762] 10
[241
5 16]
103
[261
63 16
]
74
[187258]
129
[32811116]
Technical Drawing
Multi-feed Soap Dispenser System
273.
5
[694
513 16]
224
[56881116]
[31
1/2"
]80
0 m
m[2
"]51
mm
Recommended hole sizemin Ø 32.5mm[1 1/4"]max Ø 35.2mm[1 3/8']
4
[101
9 16]
Ø44.8
[113734]
144 [3657]
90
[228
55 8]
130
[330
11 2]
273.
5
[694
513 16]
224
[56881116]
144 [3657]
90
[228
55 8]
130
[330
11 2]
1000mm[39 38]
Transformer
4700mm[185 1
16]
3000mm[118 18]TRIM TO FIT
Mains
620mm[24 7
16] 800mm[31 12]
1430mm[52 34]
1430mm[52 34]
150mm[5 29
32]
150mm[5 29
32]
52
[13201316]
30 [762] 10
[241
5 16]
103
[261
63 16
]
74
[187258]
129
[32811116]
Typical Schematic Layout
L-460 wall mounted dispenser shown for illustration purposes. Deck mounted versions are also compatible
Pavilion View, Newby Rd
Stockport SK7 5DAT + 44 (0) 161 482 7000
F + 44 (0) 161 482 [email protected]
L150
038
/ L150050 / L150051 Multi-feed Soap Dispenser System Rev 1–04/
07/1
8
Technical Drawing
Multi-feed Soap Dispenser System
273.
5
[694
513 16]
224
[56881116]
[31
1/2"
]80
0 m
m[2
"]51
mm
Recommended hole sizemin Ø 32.5mm[1 1/4"]max Ø 35.2mm[1 3/8']
4
[101
9 16]
Ø44.8
[113734]
144 [3657]
90
[228
55 8]
130
[330
11 2]
273.
5
[694
513 16]
224
[56881116]
144 [3657]
90
[228
55 8]
130
[330
11 2]
1000mm[39 38]
Transformer
4700mm[185 1
16]
3000mm[118 18]TRIM TO FIT
Mains
620mm[24 7
16] 800mm[31 12]
1430mm[52 34]
1430mm[52 34]
150mm[5 29
32]
150mm[5 29
32]
52
[13201316]
30 [762] 10
[241
5 16]
103
[261
63 16
]
74
[187258]
129
[32811116]
273.
5
[694
513 16]
224
[56881116]
[31
1/2"
]80
0 m
m[2
"]51
mm
Recommended hole sizemin Ø 32.5mm[1 1/4"]max Ø 35.2mm[1 3/8']
4
[101
9 16]
Ø44.8
[113734]
144 [3657]
90
[228
55 8]
130
[330
11 2]
273.
5
[694
513 16]
224
[56881116]
144 [3657]
90
[228
55 8]
130
[330
11 2]
1000mm[39 38]
Transformer
4700mm[185 1
16]
3000mm[118 18]TRIM TO FIT
Mains
620mm[24 7
16] 800mm[31 12]
1430mm[52 34]
1430mm[52 34]
150mm[5 29
32]
150mm[5 29
32]
52
[13201316]
30 [762] 10
[241
5 16]
103
[261
63 16
]
74
[187258]
129
[32811116]
273.
5
[694
513 16]
224
[56881116]
[31
1/2"
]80
0 m
m[2
"]51
mm
Recommended hole sizemin Ø 32.5mm[1 1/4"]max Ø 35.2mm[1 3/8']
4
[101
9 16]
Ø44.8
[113734]
144 [3657]
90
[228
55 8]
130
[330
11 2]
273.
5
[694
513 16]
224
[56881116]
144 [3657]
90
[228
55 8]
130
[330
11 2]
1000mm[39 38]
Transformer
4700mm[185 1
16]
3000mm[118 18]TRIM TO FIT
Mains
620mm[24 7
16] 800mm[31 12]
1430mm[52 34]
1430mm[52 34]
150mm[5 29
32]
150mm[5 29
32]
52
[13201316]
30 [762] 10
[241
5 16]
103
[261
63 16
]
74
[187258]
129
[32811116]
L150038 – Pump unit
L150050 – Reservoir with top-fill hose
L150051 – Reservoir
