Photos: Robert J. Settich70 woodcraftmagazine.com June 2009

Problem-Solving Products

As far as machine-setting jigs go, Oneway's Multi-Gauge isn’t new, but its problem-solving promises still turn heads. Somehow, this simple cast-iron corner can maximize the accuracy of your shop’s stationary

tools not only by checking and adjusting your jointer’s tables, knives, and fence, but also by helping replicate table saw and router table setups and checking stock thickness and joinery.

To determine if the Multi-Gauge is more workshop Swiss Army knife or just some one-trick pony, I agreed to bring one into my shop to find out.

The setupThe gauge is a substantial 31/4 lbs. of cast iron that, like most rust-prone tools, comes slathered in grease. You’ll want to clean it

and give it a protective coat of wax before putting it to use.

The body has three reference surfaces ground at 90° to each other, so the casting itself serves as a precision gauge to check adjacent surfaces for square. There’s also a hole drilled through the casting at 90° to the base so you can attach the dial indicator (included) to expand the gauge’s versatility. The indicator has an interchangeable round and flat foot to match the measuring task. The 2"-diameter dial is

Multi-Gauge maximizes machine accuracyOneway Multi-Gauge

Continued on page 72

®

(A) VC6-2 (B) VC2-1

Vapor Capsules Zerust® Vapor Capsules provide easy-to-use corrosion protection inside any type of enclosure. The capsules release an invisible, odorless, non-toxic rust and corrosion inhibiting vapor into the air. These Zerust® vapor molecules will settle on exposed metal surfaces in an enclosure and protect them from rust and corrosion for up to 1-2 years.

Non-Slip Drawer LinersZerust® Non-Slip Drawer Liners do double duty: keeping shelves, drawers and tools from damaging each other while protecting the store items from corrosion for up to 5 years. Liners can be trimmed to fit, washed and reused.

Liner Sizes: 12" x 72" or 22.5" x 118"

Corrosion Inhibiting

(B) VC2-1 Covers a 2'- radius from capsule placement up to 1 year. Great for tool boxes, safe deposit boxes, small safes and drawers.

(A) VC6-2 Covers a 6'- radius from capsule placement up to 2 years. Great for larger areas like cabinets and closets.

Available At Woodcraft. To Find Your Local Woodcraft Store, Visit woodcraft.com Or Call 800-225-1153.

09WD06Q Zerust ad.indd 1 4/27/2009 11:08:00 AM

Whiteside Machine Co.Claremont, North Carolina

800-225-3982whitesiderouterbits.com

“American Made for the American Woodworker”

A STRONG CASE FOR AMERICAN

CRAFTSMANSHIP

•Made from solid alloy steel•Precision ground for proper balance at high rpms•Uses the highest quality American made micrograin carbide•High hook and relief angles make for better chip ejection•Made with thick carbide for extra sharpenings•Superior edge quality compared to other manufacturers•Made with only high quality American made grinding wheels•Even the storage cases are made in the U.S.A.!

Basic 7 pc. Router Bit Set #401

Tested #1 by Fine Woodworking Magazine in a head to head router bit test of 17 different brands.

Whiteside full page1.6.indd 1 8/23/2005 11:26:46 AM

72 woodcraftmagazine.com June 2009

graduated in .001 increments and has a 11/32" travel range.

Trial runDespite, or perhaps because of, its simple design, the gauge performs an impressive array of tasks. The most basic function—essential for table saw and jointer fences—is checking adjacent surfaces for square shown at right. Insert the dial indicator to set the height of your jointer knives and to check the infeed and outfeed tables for parallel.

At the thickness planer, you’ll use the indicator upside down to ensure an identical setting and parallelism of the blades.

Reposition it right side up, and you can set the roller heights.

Once my tools were set, I found myself reaching for the gauge to measure the height of bits and blades, as shown on page 70. You can also measure the thickness of lumber and sheet goods and confirm the depth of grooves, rabbets, and dadoes.

Best applicationsThe Multi-Gauge really excels at jointer tune-up. It enabled me to measure the height of the knives and check the parallelism of the infeed and outfeed table. This helped me find a problem that had gone undetected until this test.

The exact-height function is also useful for duplicating setups

at the router table, such as cope-and-stick door-making bits.

Tester’s takeThe Multi-Gauge earned its keep at the jointer, but the quantifiable accuracy it provided my other machinery makes it a smart buy.Woodcraft #126979 $94.99Tester: Robert J. Settich

Problem-Solving Products

Continued from page 70

Experienced woodworkers know that Forrest blades are ideal for remodeling high-end kitchens and baths.

Forrest blades deliver smooth, quiet cuts without splintering, scratching, or tearouts. Our proprietary manufacturing process, hand straightening, and unique grade of C-4 micrograin carbide are perfect for cabinets, countertops, and fl ooring. In fact, independent tests rate us #1 for rip cuts and crosscuts.

“Your blades are without question the best by miles, and I have tried them all.” Bob Jensen, Fridley, MN

Forrest Quality ShowsDuraline Hi-AT—Great for cutting two-sided veneers and low pres-sure laminates.

Woodworker II—Best rated, all- purpose blade for rips and crosscuts.

Order from any Forrest dealer or retailer, online, or by calling directly. Our blades are manu-factured in the U.S.A. and backed by our 30-day, money-back guarantee.

www.ForrestBlades.com1-800-733-7111 (In NJ, call 973-473-5236)

Woodworker IIFine Woodworking

Chop MasterWoodshop News

Duraline Hi-ATWoodshop News

Dado KingWood Magazine

© 2

009

Forre

st M

anuf

actu

ring

C

ode

WC

The Tormek T-7 sharpening system will sharpen virtually every edge tool in your shop and home to a razor’s edge.

Tormek jigs and accessories deliver exactly the same profile on your tools every time you touch them up. Even complicated shapes like woodturning gouges and skews can be easily sharpened to exactly the profile you choose, time and time again. Tormek’s utility isn’t limited to the work shop. You can also sharpen your cooking knives, scissors, gardening tools, and camping equipment.

Get an Edge

SPECIAL OFFER Purchase a Tormek T-7 between May 1 and July 31 and get a free hand axe from the famous Swedish axe maker Gränsfors ( value $ 110 ). Visit www.tormek.com for details.

Available at www.woodcraft.com and participating stores.

74 woodcraftmagazine.com June 2009

Problem Solving Products

Every woodworker lucky enough to remember high school shop class has wrapped his or her hands around a dowelling jig. These power drill partners worked well enough for a dowel or two, but minor inaccuracies stemming from jig placement or the jig itself would multiply with each successive hole, making assemblies impossible to pull together. Struggle with a few multi-dowel glue-ups, and it’s little wonder that fudge-factor-friendly biscuits and loose tenons have gained such popularity.

The Dowelmax costs more than other jigs, but it promises not only that it can produce perfect joints

and but also that the resulting joints are stronger than those produced by other popular (and more expensive) joinery systems.

The setupI assumed that all I needed to do was open the box, grab a drill, and put the tool to work. The Dowelmax does come ready to center 3/8"-diameter holes across the width of 3/4" stock, but the collection of spacers, brackets, gauges, and pins indicated that this was less “jig” and more “joinery system.” Luckily, the kit comes with a manual and an instructional DVD. To

avoid information overload, I suggest skimming the book and making a few test joints before watching the DVD.

The Dowelmax didn’t miss any details. Starting from the carefully-machined jig core unit, all of the parts attach using comfortable, knurled brass

More than a dowelling jigDowelmax

June 2009 woodcraftmagazine.com 75

knobs. The only time you’ll need to use the included Allen wrench is when setting the drill stop and distance gauge.

Trial runI used this jig to make every kind of butt joint I could think of (edge-to-edge, edge-to-end, miters, offset).

I wasn’t surprised that the joints fit perfectly, but was impressed by how fast and easy the jig was to use, especially with multi-dowel joints. The five hardened-steel bushings enabled me to drill a row of holes without repositioning the jig. The other winning detail is the P engraved into the fence and core of the jig. Simply make corresponding checks on the reference faces

of your stock and match up the marks to position the jig.

In terms of strength, I support common sense over small-sample scientific tests. Strong glue joints are dependent upon just a few basic factors: surface area for glue (minus the sloppiness of the joint), the amount of wood removed, and the strength of the fastener. It’s easy to appreciate that dowel joints are stronger than biscuit or stub-tenon joints. For more demanding joints, I'll bet that two or more rows of dowels would be as strong as a loose or traditional tenon.

Best applicationsFace frames, drawers, cabinet and interior/exterior doors...you name it.

Tester’s takeThey say, “you get what you pay for,” and the Dowelmax is no exception. Compare it to other loose-tenon systems and the price falls right in the ballpark. But without a motor, there’s little doubt that this tool will outlive me.

I’ll keep my biscuit joiner for quick joinery, but I no longer feel the need for some other plug-and-plunge tool. I’m convinced that dowels can serve as a suitable solution for substantial joinery.Woodcraft #412425 $309.99Tester: Joe Hurst-Wajszczuk

Thomas Flinn & Co.“Manufacturers of the finest saws since 1923”

The Lynx Saw Range...Made Exclusively for Woodcraft

by Thomas Flinn & Co.

www.flinn-garlick-saws.co.uk • info@flinn-garlick-saws.co.uk

Thomas Flinn & Co.114 Harvest Lane

Sheffield, S3 8EG, England

Tel: +44 114 2725387 • Fax: +44 114 2725389

FREE YEAR!

go to woodcraftmagazine.comand click SUBSCRIBE

Complete the form below and mail in an envelope addressed to:

-or-

WOODCRAFT MAGAZINEPO BOX 7020

PARKERSBURG WV 26102-9916

2 YEARS for $29.99!

Outside of the U.S and Canada add $30 for postage. Foreign orders must be prepaid. Payment in U.S. Funds only.

By providing my e-mail address, I am indicating I’d like to receive information about my subscription and other offers from Woodcraft Magazine via e-mail.

□ Payment Enclosed □ Bill Me

Name

Address

City

State Zip

Country

E-mail

Send in now to get

2 Years for $29.99!Projects, Techniques and Products

n Dovetail a casen Divide a cabinet into

compartmentsn Create a cornice

n 4 more projectsn Famous furniture

And learn how to…

Plus…

Best-everLUMBER RACK

DECORATIVE FINISHES Done Right

Build Betterwith a CUT LIST

SPICE BOXBuild this classic

or go to woodcraftmagazine.com and click SUBSCRIBE