Upload
yuncyd
View
295
Download
0
Tags:
Embed Size (px)
Citation preview
MULTICUTN O N - W A T E R - M I S C I B L E C O O L I N G L U B R I C A N T S
MULTICUT
Your advantages:
A wide range of cooling lubricantsfor most diverse uses
Multifunctional oils for universal use
Chlorine and zinc free types that may replace certain chlorine containing products
Products low in oil mist and evap-oration
Types free of or low in aromatics Odourless and low-odour oils Thus, harmful effects on human
health and the environment are reduced as a whole
Products with high oxidation stability
high protection against corrosion and wear
Compatibility to usual seals and cable materials in machine tools
Preventive health and safety protection requirements are fulfilled.
Additionally we offer you full service:Technical support concerning lubri-cation and machining, laboratorymonitoring and advicing on questionson disposal.
On the following pages you will find a considerable selection of MULTICUT non-water-miscible cooling lubricants. Further productsfor special purposes can be suppliedupon request. Our technical service is available for advice concerningusage.
page 3 to 8
page 5
page 7
page 9
page 11
page 12
page 12
page 13
page 14
page 15
page 15
Cutting oils
Cutting oils multifunctional basic system
Thread cutting paste
Micro spraying technology
Grinding oils
Hard metal grinding oils
Deep hole drilling oils
Honing oils
Punching and precision blanking oils
Electrical discharge machining oils
Lapping and polishing oils and MULTICUT concentrates
Non-water-miscible cooling lubricants made by Zeller+GmelinPerformance, precision and efficiencyincreasingly demanded by a modernmetal processing industry are therequirements which our product lineMULTICUT is developed for. Theseproducts are usable for a broad andmost diverse range of applications.Zeller+Gmelin knows the technicaldifficulties clients are confrontedwith: In order to meet their technicalrequirements we develop coolinglubricants in cooperation with ourcustomers in conditions closest topractical use. Using oils and raw materials of constant high qualityensures most stable and safestpossible production processes. MULTICUT non-water-miscible cooling lubricants are our proven contribution to a more efficient and economical production.Zeller+Gmelin is certified according to DIN EN ISO 9001:2000.
3suitable
partly suitable
not suitable
Cutting oils
MULTICUT
STANDARD 3
MULTICUT
STANDARD 10
MULTICUT
STANDARD 20
MULTICUT
STANDARD 30
MULTICUT
STANDARD 40
MULTICUT
STANDARD HP 10
3
10
21
30
42
10
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
Cutting oils free from chlorine and zinc, low in aromatics and oil mist
Cutting oils free from chlorine and zinc, low in aromatics and oil mist
MULTICUT
SPEZIAL 4
MULTICUT
SPEZIAL 10
MULTICUT
SPEZIAL 20
MULTICUT
SPEZIAL 30
5,3
11
20
30
MULTICUT SPEZIAL 4 is mainly used
for rough machining of aluminium
and non-ferrous heavy metals e.g.
for turning, milling and thread cutting.
Cutting oils for universal use for
medium to high requirements in
machining processes.
MULTICUT SPEZIAL 4, SPEZIAL 10
and SPEZIAL 20 have a high rinsing
and cooling effect due to their
low viscosity.
The MULTICUT STANDARD range is
suitable for easy to moderate machining
work on non-ferrous heavy metals and
light alloys as well as for conventional
free-cutting mild steels. Also usable for
simple grinding operations.
The MULTICUT STANDARD 3,
STANDARD 10 and STANDARD
20 possess a high rinsing and cooling
efficiency due to their low viscosity.
MULTICUT STANDARD 30 and
STANDARD 40 may also be used for
machining building steels up to approx.
500 N/mm2 tensile strength.
A low viscosity cutting oil for easy to
medium metal removing operations on
non-ferrous heavy metals and light
alloys as well as steels: As MULTICUT
STANDARD 10, but formulated on the
base of an hydroformed hydrocrack
oil, free from aromatics and with a
very low oil mist and evaporation
tendency (HP oil).
suitable
partly suitable
not suitable
4
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
5
12
19
30
40
15
MULTICUT
EXTRA 5
MULTICUT
EXTRA 10
MULTICUT
EXTRA 20
MULTICUT
EXTRA 30
MULTICUT
EXTRA 40
MULTICUT HP 15
The MULTICUT EXTRA range can be used
for processing all kinds of steel. This
product range have a high proportion of
additives and in many cases can be
substituted for the types previously
used containing chlorine. May also be
used for broaching, deep hole drilling
and thread cutting.
The MULTICUT EXTRA range is not
suitable for non-ferrous heavy metals.
Due to their low viscosity MULTICUT
EXTRA 5, EXTRA 10 and EXTRA 20 have
a high rinsing and cooling efficiency.
MULTICUT EXTRA 5 can be used as
viscosity stabilizer in case of dragging-in
of foreign oils.
High-performance cutting oil for work-
ing all kinds of steel. The high degree
of additives means that this product is
excellently suitable for the most difficult
metal removing work. Can also be used
for deep hole drilling. An alternative
to products containing chlorine. Not
suitable for non-ferrous heavy metals.
Corresponds to the performance profile
of the MULTICUT EXTRA range, however,
MULTICUT HP 15 is formulated on the
base of an hydroformed hydrocrack
oil, is free from aromatics and has a
low oil mist and evaporation tendency
(HP oil).
Cutting oils free from chlorine and zinc, low in aromatics and oil mist
Cutting oils
5suitable
partly suitable
not suitable
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
32
46
68
MULTICUT
BASIC 32
MULTICUT
BASIC 46
MULTICUT
BASIC 68
Multifunctional oils free from chlorine and zinc, low in aromatics, oil mist and evaporation.
Cutting oils multifunctional basic system
Cutting oils chlorine free
22
32
MULTICUT
22
MULTICUT
32
Zinc free, chemically activated cooling
lubricants for general machining tasks.
This product range can also be
delivered containing zinc.
The products in our MULTICUT BASIC
range can be used for easy to moder-
ately complicated machining tasks on
steel, cast iron and non-ferrous metals.
They fulfil the requirements for hydraulic
oils HLP according to DIN 51 524 part 2
and due to their CLP-Legierung are
suitable for use as gear oils according
to DIN 51 517 part 3.
Furthermore, MULTICUT BASIC 68
fulfils the requirements according to
DIN 51502 CGLP for guideway- and
glideway oils.
The products in our multifunctional
basic system are suitable both for
machining and for machine lubrication.
Using highly refined basic oil with
specially chosen additives means that
the MULTICUT BASIC range achieves
maximum compatibility. Any mixing
and this is unavoidable when using in
machine tools due to leakage does not
adversely affect the manufacturing
process. If, however, the machine design
requires different viscosities, we recom-
mend monitoring the viscosity of the
machining oil.
Using the products of our MULTICUT
BASIC range cuts down on the types
of oils you have to stock.
suitable
partly suitable
not suitable
6
Cutting oils
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
11
23
32
21
32
38
11
15
20
19
MULTICUT
UNIVERSAL 10
MULTICUT
UNIVERSAL 20
MULTICUT
UNIVERSAL 40
MULTICUT
SUPER 20
MULTICUT
SUPER 30
MULTICUT
SUPER 40
MULTICUT
ULTRA 10
MULTICUT
ULTRA 15
MULTICUT
ULTRA 20
MULTICUT
EXTRA 17
Cutting oils chlorine free
Cutting oils for highly alloyed steels and non-ferrous heavy metals - chlorine free, low in aromatics and oil mist
Universal cutting oils for moderate
requirements when machining.
Due to their low viscosity MULTICUT
UNIVERSAL 10 and UNIVERSAL 20 have a
high rinsing and cooling effect.
MULTICUT SUPER 20, SUPER 30 and SUPER
40 are proven cutting oils for a wide range
of applications. These products are especial-
ly suitable for turning and milling. Especially
on multi spindle machines MULTICUT
SUPER has led to excellent results.
MULTICUT SUPER 40 may also be used for
thread rolling.
The MULTICUT ULTRA range is suitable for
all heavy machining operations. Especially
when high-alloyed cutting oils and com-
patibility to non-ferrous heavy metal are
needed at the same time. It can be used for
machining of all kinds of steels such as
free-cutting mild steels, case hardened and
tempered steels, stainless and acid resistant
steels, aluminium and non-ferrous heavy
metals. MULTICUT ULTRA is ideal for all
machining operations e.g. turning, milling,
thread cutting and deep hole drilling.
Practical experiences have shown that
MULTICUT ULTRA is also especially suitable
for processing of titanium alloys.
MULTICUT EXTRA 17 is also used in
applications where the machining processes
require oils proportionately high in additives
and where they also have to be compatible
to non-ferrous heavy metal. Examples of
uses for this product: milling, broaching,
deep hole drilling and thread working.
7suitable
partly suitable
not suitable
Cutting oils
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
27
80
*
MULTICUT
A 755
MULTICUT
953
MULTICUT
RAPID
*run out time in a DIN beaker 6 mm/20C
34-50 Sec. (approx.
280 mm2/s/20C)
corresponds to
DIN EN ISO 2431
DIVINOL
GEWINDESCHNEID-
PASTE CF
High alloy cooling lubricant for machining
all types of steel, also for stainless and
acid resistant chrome-nickel steels.
MULTICUT A 755 is a tried-and-tested
cutting oil and can be used universally
for high requirements. It is used for
turning, milling, thread moulding,
broaching and thread cutting amongst
other applications.
High alloy cutting and thread pro-
cessing oil for all types of steel, even
for materials difficult to machine. Used
for machining, mainly for difficult
machining processes such as gear
shaping, hobbing gears and thread
working (thread moulding and cutting).
This red dyed lubricant is an appropriate
substitute for chlorine containing types.
It can be applied by rolling, brushing,
immersion or spraying.
Metal working oils on the basis of
a compounded mineral oil and
colloid sulphur. Recommended for
thread working. Application with
a brush straight from the container.
It is not suitable for oil circulation.
Stir before use.
Chlorine-free thread cutting paste for
all kinds of thread work. The product
is excellently suitable for example for
internal and external thread cutting,
thread moulding and thread forming.
For processing all kinds of steels,
especially hard and tough materials
that are difficult to machine.
DIVINOL thread cutting paste is also
available with chlorine.
Cutting oils chlorine free
suitable
partly suitable
not suitable
8
Cutting oils
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
25
27
18
250
79
MULTICUT
AIF
MULTICUT
AS 6
MULTICUT
821
MULTICUT
CL 220
MULTICUT
KONZENTRAT
Highly chemically active high-
performance cooling lubricant for
machining tasks on all types of steel,
especially stainless and acid-resistent
steels, as well as non-ferrous heavy
metals and light alloys.
Highly chemically active high-
performance cooling lubricant for
metal removal machining on all types
of steel, especially stainless and acid-
resistant steels. May also be used for
thread and profile grinding.
A highly activated cooling lubricant with
low viscosity for non-cutting processing
of materials that are difficult to machine.
Also suitable for external and internal
thread working.
High-alloyed thread forming oil used for
processing of stainless steels as well as
materials difficult to machine. Applied
manually or by brush.
High-pressure lubricant (concentrate) for
external and internal thread working and
also for other difficult machining tasks
on hard or tough steel and light alloys. It
is especially suitable for thread moulding.
Use:
Apply with a brush or oil spray can
directly onto the cutting edge straight
from the container or as cutting oil
additive for a stronger activation and
increase in performance of the normal
cooling and cutting oils in machines
with a cooling lubricant circulation.
The amount to be added is dependent
upon the machining degree of difficulty.
Dosages of between 5% up to max.
30% normally cover all machining tasks.
Cutting oils containing chlorine
9suitable
partly suitable
not suitable
Micro spraying technology
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
1,8
2,0
2,0
20
30
43
85
4,1
MULTICUT
ALK 1
MULTICUT
ALK 2
MULTICUT
ALK 2 EP
MULTICUT
ALK 20
MULTICUT
ALK 30
MULTICUT
ALK 45
MULTICUT
ALK 80
MULTICUT
ALK 4
MULTICUT ALK 1, ALK 2 and ALK 2 EP
are products on the basis of synthetic
hydrocarbon mixtures with additives.
The products evaporate leaving nearly
no residue. The products are used for
sawing,milling, punching and trimming
aluminium. Furthermore, they are
suitable for punching steel sheets up
to approx. 1 mm thick.
The MULTICUT ALK range is fully
synthetic. The products leave nearly no
residue after thermal treatment upwards
of >300C. In this manner machining
procedures such as welding which follow
are not affected.
MULTICUT ALK 20, ALK 30, ALK 45 and
ALK 80 are used mainly for machining
aluminium, e.g. sawing all kinds of
aluminium profiles with band and
circular saws, whereby the kinds with
higher viscosity are used for larger
profiles. Furthermore, MULTICUT ALK 45
is used for general machining of alu-
minium engine blocks as well as for
bending steel tubes. The product fulfils
the requirements of DBL 6768.25 from
Daimler AG.
Low-viscosity metal working oil
with mineral oil base mainly for
aluminium. Suitable for easy to
medium metal removing work and
for punching. Creation of aluminium
fines is significantly reduced and
deformation and welding beads on
tools are minimised.
Micro spraying technology chlorine free
suitable
partly suitable
not suitable
10
Micro spraying technology
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
48
110
35
18
21
MULTICUT
MICRO SP 51
MULTICUT
MICRO 110
MULTICUT
MICRO R 40
MULTICUT
MICRO 15
MULTICUT
MICRO 20
A fully synthetic product with
extreme pressure active ingredients.
This type is used for machining steel as
well as aluminium. Excellent results for
example are attained when deep drilling
aluminium. The product is used for
metal removal as well as noncutting
machining procedures are carried out.
MULTICUT MICRO SP 51 fulfils the
requirements of the DBL BQF 6768.15
from DaimlerChrysler AG.
MULTICUT MICRO 110 is a full synthetic
oil developed for demanding require-
ments and in use with micro spraying
systems. Alloyed with extreme pressure
additives it is optimised for machining
of steels and aluminium. Special
components provide an optimal drop
size distribution.
MULTICUT MICRO R 40 is an alloyed
product on native basis for demanding
requirements. Due to its alloy layer this
product is used for aluminium and steel
processing, e.g. when sawing steel
tubes or for thread rolling in steel.
Fully synthetic products used mainly
for aluminium working, e.g. sawing
and milling of aluminium profiles or
aluminium cylinder heads in the
automotive industry.
MULTICUT MICRO 15 is also used for
lubrication and working of glass
materials as well as for lubricating micro
measuring equipment. Even at high tem-
peratures the product does not resinify.
MULTICUT MICRO 20 is also used in
steel processing. The product evaporates
at temperatures above 190 C.
Micro spraying technology chlorine free
11
suitable
partly suitable
not suitable
Grinding oils
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
10
19
25
8,6
17
26
4,7
MULTICUT
GRIND 8
MULTICUT
GRIND 17
MULTICUT
GRIND 25
MULTICUT
GRIND HP 8
MULTICUT
GRIND B 17
MULTICUT
9229/1
MULTICUT
STANDARD FP 4
Grinding oils for the moderate
and high-speed range
Additives: very high. Recommended for
CBN and diamond grinding discs.
Examples of product use: grinding
profiles, mould grinding, plunge-cut
grinding, centerless grinding or for
internal or external cylindrical grinding.
MULTICUT GRIND 8 is approved for
Kapp, Junker and Wendt.
High-performance grinding oil for the
medium and high-speed areas. As
MULTICUT GRIND 8, but formulated
on the base of an hydroformed
hydrocrack oil, is free from aromatics
and has a very low oil mist and eva-
poration tendency (HP oil).
Additives: moderate. Recommended for
CBN and diamond grinding discs,
in some circumstances for silicon and
corundum grinding disc. Grinding pro-
cesses such as plane grinding, profile
grinding or circular grinding present
absolutely no problem.
MULTICUT 9229/1 is mainly used
for profile or thread grinding when
machining all qualities of steel as
well as non-ferrous heavy metals.
Metalworking oil with low viscosity
applicable for grinding steels, cast-
irons and aluminium. MULTICUT
STANDARD FP 4 is mainly used for
e.g. internal or external, for cylindrical
or surface grinding operations.
Appropriate concentrates are available for later addition of additives to our grinding oils.
Grinding oils free from chlorine and zinc, low in aromatics and oil mist
suitable
partly suitable
not suitable
12
Hard metal grinding oils
Designation Vis
cosi
tym
m2 /s
/40
C
App
licat
ions
Designation
Hard metal grinding oils free from chlorine
4,2
9,0
15
MULTICUT
GRIND HM 4
MULTICUT
GRIND HM 8
MULTICUT
HM KONZENTRAT
MULTICUT
TIBO 10
MULTICUT
TIBO 20
MULTICUT GRIND HM 4 and GRIND HM 8 are spezial hard metal
grinding oils inhibited against dissolving out of cobalt. Formulated on
base of an hydroformed hydrocrack oil it is free of aromatics and
posseses a very low oil mist and evaporation tendency.
We recommend use of MULTICUT HM KONZENTRAT for refreshing the
cobalt inhibition.
Deep hole drilling oils - free from chlorine
Highly chemically active deep hole
drilling oils for all kinds of deep drilling
procedures. MULTICUT TIBO 20 for
example can partly replace products
containing chlorine. MULTICUT TIBO 10
has an especially good rinsing efficiency.
MULTICUT TIBO 20 has been proven in
toothed disc machining as well as deep
drilling work.
Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
peer
ed s
teel
sSt
ainl
ess
+ ac
id-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
9,2
20
Deep hole drilling oils
13
5,0MULTICUT
HONOLIT A
Chlorine containing product with a high machining performance for achieving
the best quality surfaces and long honing stone lifetimes. May be used for all
qualities of steel as well as for non-ferrous heavy metals.
Honing oils containing chlorine
Honing oils
Designation Vis
cosi
tym
m2 /s
/40
C
App
licat
ions
3,2
4,0
5,1
4,6
5,1
15
20
MULTICUT
HONOLIT UNIVERSAL 3
MULTICUT
HONOLIT PLUS 4
MULTICUT
HONOLIT UNIVERSAL 4
MULTICUT
HONOLIT SPEZIAL 4
MULTICUT
HONOLIT 4
MULTICUT
HONOLIT EXTRA 15
MULTICUT
HONOLIT EXTRA 20
Mainly used for grinding and honing processes in machining of ceramics, e.g.
aluminium oxide, aluminium nitride and silicon carbide.
Alloyed honing oil, specially for machining castings.
For honing tough, hard steels, nickel alloys etc. and for achieving
particularly high surface quality, mainly used for super finishing.
For honing toughened and nitrided steels as well as hard chrome plated
components using corundum - or diamond stones for example. The product
is also suitable for machining aluminium and aluminium alloys as well as non-
ferrous metals.
Honing oil for short and long stroke honing of tough, hard workpieces and
non-ferrous metals with high machining performance. Examples of uses:
honing and grinding of high alloy tool steel as well as the finishing of shafts,
cylinders or tooth profiles on toothed wheels, even when working with
ceramic tools. Honing of gun barrels.
EP-alloyed honing oils. Used in honing machines for which higher viscosity
oils are prescribed. Suitable for all kinds of steel and grey cast iron, not
suitable for non-ferrous heavy metals. Examples of uses: honing brake
cylinders, drilling holes in grey cast iron valve blocks as well as honing
toughened sinter steel.
Honing oils free from chlorine
suitable
partly suitable
not suitable
14
Punching and precision blanking oils
Designation Vis
cosi
tym
m2 /s
/40
CFr
ee-c
utti
ng
mild
ste
els
Case
har
dene
d +
tem
pere
d st
eels
Stai
nles
s +
acid
-
resi
stan
t st
eels
A
lum
iniu
m
Non
-fer
rous
he
avy
met
als
App
licat
ions
60
130
80
60
140
MULTICUT
STAMP 60
MULTICUT
STAMP 130
MULTICUT
STAMP E 80
MULTICUT
STAMP CL 60
MULTICUT
STAMP CL 140
Punching and precision blanking oils free from chlorine
Punching and precision blanking oils containing chlorine
Positive experiences have been made with the products of our MULTIDRAW AL range when
punching mainly aluminium, steel and non-ferrous heavy metals with thickness up to
approx. 2 mm. These are fully synthetic punching and drawing oils, which evaporate rapidly
after the machining process and leave a dry or thin lubricated film depending upon the type.
Please ask for the corresponding documentation on these products. They are
MULTIDRAW AL 2094 MULTIDRAW AL 2066 MULTIDRAW AL 65
MULTIDRAW AL 2474
MULTIDRAW AL 9068 MULTIDRAW AL 9635 MULTIDRAW AL 73
Punching and precision blanking oil for
all kinds of steel sheets , also for thicker
materials.
Highly alloyed punching and precision
blanking oil for processing thicker
steels and medium to difficult part
geometries.
Punching and precision blanking oil
with a high degree of additives for pro-
cessing highly alloyed steels with
greater material thicknesses and
difficult part geometries. This red col-
oured product is free from mineral oil.
Chlorine containing products can be
replaced by MULTICUT STAMP E 80.
Punching and precision blanking oils
with a high degree of additives for
highest requirements. Suitable for
highly alloyed steels with greater
material thicknesses and difficult part
geometries.
15
Electrical discharge machining oils
Electrical discharge machining oils free from chlorine
1,3
1,9
3,3
MULTICUT FU 13
MULTICUT FU 19
MULTICUT FU 33
An extra light dielectric low in aromatics especially for use in finish machining.
A multi-range dielectric low in aromatics that can be used for rough working as
well as fine machining.
A dielectric low in aromatics that is mainly used for rough working.
Electrical discharge machining oils are used as dielectrics for the electrical discharge
machining of components with difficult geometry. The main task of the dielectric and
the requirements are:
Upon demand
good insulation
Cooling of tool and component
high breakdown voltage
low evaporation tendency
Oxidation stability
Skin and seal compatibility
chemical neutrality
high rinsing efficiency
Designation Vis
cosi
tym
m2 /s
/40
C
App
licat
ions
MULTICUT concentrates
Lapping and polishing oils
There are replenishing concentrates available for increasing the performance or for
supplementary additives of thinned-out machining oils. Please contact us if you require
these.
Z e l l e r + G m e l i n G m b H & C o . K GSchlossstrae 20 73054 Eislingen, GermanyFon +49 71 61 8 02-0 Fax +49 71 61 8 [email protected] www.zeller-gmelin.de
PROGRAM
Industrial lubricants
MULTICAL calibration lubricants
MULTICOR anti-corrosion agents
MULTICUT non-water-miscible cooling lubricants
MULTIDRAW wire drawing lubricants
MULTIDRAW deep-drawing lubricants
MULTIPRESS extrusion oils
TEXTOL lubricants for the textile industry
ZUBORA water-miscible cooling lubricants
FETTE high performance lubricating greases
DIVINOL guideway and slideway oils, hardening oils,
adhesive oils, hydraulic oils, industrial gear oils,
commercial white oils, compressor oils,
cylinder oils
You can find our products in over 100 countries world-wide .
1P34
5018
-110
7-0