MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid® · Discipline guide. 5 ... Modeling using MultiGrid in our PDMS or SP3D catalogues in the detailed design stage can generate ... Whatever

1

MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid®

Being first is good, being smart is better, being both is Simply the Best!

2

PRODUCT PORTFOLIOOglaend System offer a broad range of cable support systems for all applications, e.g. cabIe Iadders, cable trays, junction box racks, tubing clamps, cable cleats, heating cables, control systems etc.

If you need further information, please do not hesitate to contact us!

Company presentation

Download our latest version of product catalogues from: www.oglaend-system.com

3

Contents:–––––––––––––––––––––––––––––––––––––––– Catalogue Portfolio 2–––––––––––––––––––––––––––––––––––––––– Explanation of symbols 3–––––––––––––––––––––––––––––––––––––––– MultiGrid™: Multidiscipline support introduction 4–––––––––––––––––––––––––––––––––––––––– Starting Brackets (Welded and bolted) 12–––––––––––––––––––––––––––––––––––––––– Mekano™ Channels 14–––––––––––––––––––––––––––––––––––––––– Mekano™ Channels Data Sheets 18–––––––––––––––––––––––––––––––––––––––– MultiGrid™: Electro, Instrumentation & Telecom 56–––––––––––––––––––––––––––––––––––––––– Angle Brackets and Various Items Brackets for Cable Trays Accessories Earth “Jumpers” and Lug Splice Connectors for Channels 66–––––––––––––––––––––––––––––––––––––––– Beam Clamps 68–––––––––––––––––––––––––––––––––––––––– Instrument and other E, I & T products ETIN tubing clamps, SmartCleat, Lighting, Rack, Instrument stands and equipment plates Ask for our special catalogues: 69–––––––––––––––––––––––––––––––––––––––– MultiGrid™: HVAC 70–––––––––––––––––––––––––––––––––––––––– MultiGrid™: Pipe Support Standard Details 72–––––––––––––––––––––––––––––––––––––––– MultiGrid™: Ships 75–––––––––––––––––––––––––––––––––––––––– Multidiscipline for Concrete Constructions Brackets and Channels solutions 76–––––––––––––––––––––––––––––––––––––––– Multidiscipline support system in FRP 78–––––––––––––––––––––––––––––––––––––––– Miscellaneous Products UNO, U-Bolts, Safety-Hooks, El-Insulation details 79–––––––––––––––––––––––––––––––––––––––– Self-Locking Bolt Sets Bolts & Fixing items 80–––––––––––––––––––––––––––––––––––––––– Other Perforated Channels 82–––––––––––––––––––––––––––––––––––––––– Sales Locations 83––––––––––––––––––––––––––––––––––––––––

MultiGrid™ Support System Electro / Instrument / Telecom HVAC Piping

MultiGrid™ Support SystemElectro / Instrument / Telecom HVAC Piping

Discipline guide:

Patents and design applicationsMany of Oglaend System´s products are patented or protected by design applications.

Mekano Channels

Low weight, full system compatibility and considerable torsion strength. Material thickness from 1,5-5 mm.Surface treatmentStandard: Pickled and passivated.Study the new patented 125 mm design on page 17.

HVAC

E, I & T

Channels

Starters

MultiGrid™

www.oglaend-system.com

SYMBOLS FOR MATERIAL TYPES:PG = Pre galvanized steel 20 my zinkHDG = Hot Dip Galvanized NS/ISO 1461*SS = Stainless Steel AISI 316L**AL = Aluminium 5052 H22/H32*) Steel quality for HDG: Steel grade EN 10130 Grade DC01**) Steel quality for SS: EN 1.4404Other material qualities on request.

2(4)M10x25

SYMBOLS FOR SCREWS:

2M10x60

1M10x20

2(4)M6x12

64x25

This symbol shows type of screw, the number needed and name.For order no.– see page 81.

Standard: Screws are included! The number of screws and nuts before the brackets are included when ordering the part.

(4) Screws in brackets areNOT included! The number in brackets represents the number of screws that can be fitted to fix the part. These must be ordered separately.

Screws NOTIncluded! SNI: Screws not included.

SYMBOL EXAMPLES:

Expansion bolts 2 pcs. needed. Type M10x60.

Locking screws 1 pcs. needed. Type M10x20.

Hexagonal screws Minimum 2 pcs. needed. (4) May be used*. Type M6x12.

Self tapping screw 6 pcs. needed. Type 4x25.

SNI

Subject to minor changes without notice. Check our website for latest issues.

Piping

for Ships

for Concrete

in FRP

––––––––––––– MultiGrid™ ––––––––––––– Starters ––––––––––––– Channels

––––––––––––– E, I & T

––––––––––––– HVAC––––––––––––– Piping––––––––––––– for Ships––––––––––––– for Concrete

––––––––––––– in FRP–––––––––––––

–––––––––––––

4

Mekano®

Mekano is the concept name of all channels and fixing acces-sories for MultiGrid. The Mekano channels are multidiscipline and used for creating support and support frames. All Mekanoparts are marked in red in the following system drawings.

Discipline Parts

Discipline parts for Electro/Instrument/ Telecom are marked ingreen, HVAC are marked in blue and Piping parts are marked in yellow.

Multidiscipline Support

MultiGrid® is an integrated support system for all main disciplines such as electrical,instrumentation, telecom, HVAC and piping.A key feature is the compatible components which gives you maximum support flexibility across the disciplines. This offers you thefreedom to use the system for one or twodisciplines, or three or four if you like. The system provides a bolted solutionfor supporting all disciplines.

MultiGrid®

MultiGrid is the concept name of the entire multidiscipline support system. The MultiGrid concept covers all welded and bolted starter brackets, all channels and frames.

MultiGrid®MultiGrid® Support System for:Electro / Instrument / Telecom HVAC Piping

Discipline guide

5

Design & Engineering

MultiGrid® is available in Aveva’s PDMS format along with our cable ladders, trays and Intergraph’s Smart Plant 3D. See page 74.

Modeling using MultiGrid in our PDMS or SP3D catalogues in the detailed design stage can generate Total System Cost savings of up to 35% in an EPC contract.

Reduce Total System Cost

MultiGrid® is designed to optimize all factors contributing to the Total System Cost of a construction project. The Total System Cost can be reduced by up to 30 percent.

Our value proposition:

Quick Installation

Our patented system and product solutions make the installation work very simple and quick.

In co-operation with your engineering and installation team we can tailor an installation manual that will secure the quality and the time schedule of the installation.

Installation time reduction up to 60 percent.

Less Weight & Volume

The combination of an integrated support system for all disciplines and patented component solutions generates approximately 30 percent weight savings and 15 percent volume savings.

Improved Safety Performance

Our system and product solutions reduces the installation time significantly through the constuction phase of an EPC contract. Fewer manhours on site minimize the safety risk.

Long Life & Integrity

A key feature of MultiGrid® is the compatibility of the components across the disciplines.

The compatibility and flexibility of this system has been the same for over 30 years. This makes your future investment secure and guarantees that modifications will be straight forward.

MultiGrid® is compatible with our FRP product line.

Material Qualities

Supplied in both Stainless SteelAISI 316L and Hot Dip Galvanized Carbon Steel.Other material qualities can be made available on request.

Cross section data from:MultiGrid™ included:

MultiGrid® Support System

1 2

TW!The utmost use of Mul-tiGrid™

Start by welding starter brackets in a grid pattern before painting the main structure.

For increased flexibility a horizontal Mekano channel can be bolted to the starters.

6

The idea behind MultiGrid® is that welding brackets are welded in a square pattern (e.g. 1200 x 600 cm).

These are welded early in the construction phase, and later sandblasted and painted along with the steel structure.

The broad range of starter brackets and channels provide excellent support for any discipline.

MultiGrid® delivers modification flexiblity, and eliminates need for hot work. No shut down required.

MultiGrid® bolted support for the future

No welding No sand blastingNo painting

Above: Grid system and ”starters” welded & ready for area painting.

3 4

Provide lowest possible Total System Cost

Vertical and horizontal Mekano® channels can be bolted to the starters to support any discipline.

MultiGrid®: Your flexible low weight support system, safe and easy to install and flexible in terms of future modifications.

7

The broad range of brackets in the Mul-tiGrid® system enable support for dif-ferent loads. The starters should always be selected based on the load capacity needed.

The grid pattern is decided through a dia-logue between the engineering experts.

All grid starters and Mekano® channels are fully compatible in order to provide flexibility and deliver lowest possible Total System Cost.

Whatever support you decide, the solution may be preassembled before installation.

We offer welded starters

for whatever support solution

you need!

How to get started:

Welded Starters See full range page 10-11

Increased load capacity

The Mekano® Support Channels See the full range page 14-17

Choose channels according to the required load capacity

Choose starters according to the required load capacity

FOR HOT WORK


HOT WORK

Page 12

8

We offer bolted starters

for whatever support solution

you need!

Bolted Starters See full range page 12-13

FOR COLD WORK


Increased load capacityChoose starters according to the required load capacity

COLD WORK

Page 14

9

The FRP Support Channelscombined with FRP or Steel Starters

give required load capacity.See page 78.

111 111

200

300

10

Welded Starters – Typical support for Electrical, Instrumentation & HVACType states length and recommended channel

FOR HOT WORK

S-M WB-200-CH100-1

S-M WB-200-CH50-1

Used with Mekano Channel Type S-M CH50-1

S-M WB-125-CH50-1*

125 20

0

4040

Type T Weight Art. no. Art. no. mm kg CS** SSS-M WB-125-CH50-1* 6 0,2 1302511 1371695S-M WB-200-CH50-1 6 0.3 1302512 1371696*) Welding Brackets L = 125 mm normally not in stock**) CS steel quality: S235JR

50-1

S-M CH100-2T2

S-M WB-ST-220-CH100-2T

S-M WB-ST-200-CH50-2

S-M CH50-2T

S-M WB-200-CH50-2

S-M CH100-1

S-M CH50-2T

S-M CH100-2T2

S-M WB-300-CH100-1

S-M WB-200-CH100-1

S-M WB-125-CH100-1*

125

200

300

90 90 90

Type T Weight Art. no. Art. no. mm kg CS* SSS-M WB-125-CH100-1 6 0.5 1302507 1371691S-M WB-200-CH100-1 6 0.8 1302508 1371692S-M WB-300-CH100-1 6 1.2 1302509 1371693 Used with Mekano Channel Type S-M CH100-1 S-M CH100-2T *) CS steel quality: S355J2-Y05

100-1 100-2T

S-M WB-ST-175-CH100-3 S-M WB-150-CH100-3

120

175 150

114 109 91 93

100-3

*) Check for online updates

Type T Weight Art. no. Art. no. mm kg CS* SSS-M WB-200-CH100-2T 4 1,6 Contact us 1301024S-M WB-300-CH100-2T 4 2,5 Contact us 1301061S-M WB-ST-220-CH100-2T 4 1,2 Contact us 1301073S-M WB-300-CH100-2T3 4 2,3 Contact us 1302061(only for 100-2T3 channel)S-M WB-IN-225-CH100-2T 5 1,4 Contact us 1301059

111 111

100-2T2 100-2T3

Used with Mekano Channel Type

99114

220

111 111

300

225

9090

Type T Weight Art. no. Art. no. mm kg CS* SSS-M WB-ST-175-CH100-3 4 1.3 1372516 1372517S-M WB-150-CH100-3 4 1.2 1372514 1372515 Used with Mekano Channel Type S-M CH100-3

*) CS steel quality: S235JR

S-M WB-ST-175-CH100-3

S-M CH100-3

11

Welded Starters – Typical for Piping & heavy loads Type states length and recommended channel

FOR HOT WORK

S-M WB-300-CH50-2

S-M WB-200-CH50-2

S-M WB-125-CH50-2

S-M WB-ST-200-CH50-2

300

125

200

170

250

61 61 61 61 61 61 61 61

50-2 60-2 50-2T

Type T Weight Art. no. Art. no. mm kg CS* SSS-M WB-125-CH50-2 6 0.6 82210 82211S-M WB-200-CH50-2 6 1.0 1302514 1371698S-M WB-300-CH50-2 6 1.5 1302599 1371699S-M WB-ST-250-CH50-2 6 0.9 84287 84283 Used with Mekano Channel Type S-M CH50-2 S-M CH60-2 S-M CH50-2T *) CS steel quality: S355J2-Y05

CS brackets are uncoated and not available in HDG.

S-M CH100-4

S-M CH100-3

S-M CH100-2T3

S-M WB-CH100-4

S-M WB-200-CH100-2T

S-M WB-150-CH100-3

S-M WB-PL-CH100-4

S-M WB-FP-CH100-4

S-M WB-CH100-4

240

240

240

250

200

200

200200

113 113 150 150

8

6

100-4

Type T Weight Art. no. Art. no. mm kg CS SSS-M WB-CH100-4 6 3 1372606 1372601S-M WB-PL-CH100-4 6 5.5 N/A 1372552S-M WB-FP-CH100-4 6 12 N/A 1372602 Used with Mekano Channel Type S-M CH100-4

*) CS steel quality: S355J2-Y05

S-M WB-300-CH100-2T3

S-M CH100-2T

S-M CH100-1

S-M CH50-2T

S-M BC-240

S-M BS-CH100-4

S-M BS-CH100-1

S-M BS-CH100-1

160

105

Type T Weight Art. # Art. no. mm HDG SSS-M BS-CH100-1 3 1.2 61092 1371707

Used with Mekano Channel Type S-M CH100-1

S-M CH100-2T

100-1 100-2T

S-M BC-ST-HD

S-M CH100-3

12

Bolted Starters – Typical support for Electrical, Instrument & HVACType states recommended channel

FOR COLD WORK

Type T Weight Art. # Art. no. mm kg HDG* SSS-M BS-CH100-4-C 6 4.5 1372522 1372523S-M BS-CH100-4-B 6 4.9 1372554 1372555S-M BS-CH100-4 6 5.5 1372603 1372550 Used with Mekano Channel Type S-M CH100-4 100-4

*) CS steel quality: S355J2-Y05

S-M BS-CH100-4 S-M BS-CH100-4-C

240

240

240

150200120200 200200

8

113

M12 bolts

88

S-M BS-CH100-4-B

S-M BC-300

S-M BC-FC

S-M BC-160

(x2)

See page 68 forfurther details

50-1 50-2 50-2T

Type T Weight Art. no. Art. no. mm kg HDG SSS-M BC-FC 4 0.37 85196 85197S-M BC-160 3 1.16 85621 85622S-M BC-300 3 1.7 85623 85624 Used with Mekano Channel Type S-M CH50-1 S-M CH50-2 S-M CH50-2T1,5 S-M CH50-2T2

S-M BS-CH100-3

M12 bolts

172

150

110

90

76

S-M BC-ST-HD

Type T Weight Art. # Art. no. mm kg HDG SSS-M BC-ST-HD 4 2,4 N/A 86887S-M BS-CH100-3 4 3,6 1372493 1372492 Used with Mekano Channel Type S-M CH100-3 S-M CH100-4

100-3 100-4

Bolted solutions for concrete, see page 77.

S-M CH100-4

S-M CH100-3

S-M CH60-2

S-M BC-CH100-3

S-M BS-CH60-2

S-M BC-MS-CH100-4

13

Bolted Starters – Typical for Piping & heavy loadsType states recommended channel

FOR COLD WORK

100-2T2 100-2T3 100-3

S-M BC-CH100-3

S-M BT-CH100-3

S-M MG-CA

See page 68for further details

109.5

500 95

Type T Weight Art. no. Art. no. mm HDG SSS-M BC-CH100-3 4 3 1372490 1372491S-M BT-CH100-3 4 3.5 1372494 1372495S-M MG-CA 3 80926 1372497 Used with Mekano Channel Type S-M CH100-2T2 S-M CH100-2T3 S-M CH100-3

400

415

100

120

M16 bolts

S-M BC-MS-CH100-4

(See Page 63 for details.)Fit-range HE240-1000A/B

100-4

Type T Weight Art. # Art. no. mm kg HDG SSS-M BC-MS-CH100-4 5 16 1372519 1372520 Used with Mekano Channel Type S-M CH100-4

S-M BS-CH60-2 103

96 Type T Weight Art. # Art. no. mm HDG SSS-M BS-CH60-2 4 2.5 1371424 1371423 Used with Mekano Channel Type S-M CH60-2 S-M CH50-2T1.5 S-M CH50-2T2 S-M CH100-2T2 S-M CH100-2T3

60-2 50-2T 100-2T

Type T Weight Art. no. Art. no. mm kg HDG* SSS-M BS-200-CH100-2T 4 4,2 1371426 1371425S-M BS-300-CH100-2T 4 5,0 1371428 1371427S-M BS-300-CH100-2T3 4 4,9 1303359 1303358(For CH100-2T3 channel)

*) CS steel quality: S355J2-Y05 100-2T2 100-2T3

200

200200200

300

300

200 200200

888

14

S-M CH100-1S-M CH50-2 S-M CH50-1

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

Mekano 50-2Mekano 50-1 Mekano 100-1

S-M CH50-2T S-M CH100-2T

Mekano 50-2T Mekano 100-2TSingle and DoubleSingle and Double

Support Channels for Electrical, Instrument & HVAC

DW = Dead Weight KN = Kilo Newton

Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SSS-M CH50-1-3 1371684 1371687 S-M CH50-2-3 1302506 1371689 S-M CH100-1-3 1371649 1371685 S-M CH50-2T1,5-3 1372186 1372181 S-M CH50-2T2,5-3 1372188 1372183 Double perforated S-M CH100-3-0.5 80912 80267 3mm thickness S-M CH50-2T2-3 1372187 1372182 S-M CH100-2T3-3 1372190 1372185 S-M CH60-2-A-3 1371432 1371430 S-M CH100-3-1 80913 80268 S-M CH100-4-3-6 1372525 1372526 S-M CH100-2T2-3 1372189 1372184 Single perforated S-M CH100-3-1.25 80914 80460 5mm thickness S-M CH60-2-B-3 1371431 1371429 S-M CH100-3-2.5 1372504 1372505 S-M CH100-4-5-6 1372530 1372531

AE - Effective cross-section area (mm2) ITE - Effective moment of inertia, torsion (mm4)IXE - Effective moment of inertia, bending about X-axis (mm4)IYE - Effective moment of inertia, bending about Y-axis (mm4)

WXP - Moment of resistance, bending about X-axis, perforated (mm3) WYP - Moment of resistance, bending about Y-axis, perforated (mm3)CTP - Moment of resistance, torsion, perforated (mm3)

Calculation basis Channel material thickness (mm)

Ordering list: Type states width, material Type states width, material Type states width, material Type states width, material Type states width, material Type states width and length Type states width and length Type states width and length thickness and length thickness and length thickness and length thickness and length thickness and length

Data:

Channel Type: CH50-1 (1.5) CH50-2 CH100-1 (1.5) CH100-1 (1.5) CH50-2T CH50-2T CH100-2T CH50-2T CH100-2T CH60-2 CH100-3 CH100-4 CH100-4 Double (1.5mm) Single Double (1.5mm) (2mm) (2mm) (2.5mm) (3mm) (6mm) (2.5mm) (3mm) (5mm)AE 305 215 214 427 222 222 461 240 722 633 777 1023 1 642ITE 237 169 160 319 33 853 41 015 273 205 54 474 449 902 7 524 1 619 2 516 957 3 972 831 IXE 127 000 81 598 31 4961 629 922 35 062 71 015 521 996 88 245 789 750 220 797 1 073 537 1 596 639 2 428 086IYE 44 790 81 598 11 960 40 000 55 062 71 015 521 996 88 245 789 750 220 797 1 347 007 1 596 639 2 428 086WXP 5 082 2 663 6 299 12 599 1 682 2 168 7 844 26 278 11 792 4 902 17 267 28 016 42 284WYP 1 991 2 663 762 1 850 1 682 2 168 7 844 26 278 11 792 4 902 23 961 28 016 42 284CTP 158 113 106 213 2 492 3 101 12 217 4 171 19 343 1 121 578 44 467 70 680

Electro / Instrument / Telecom HVAC Piping



Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. WeightType mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/mS-M CH50-1-3 1.5 1.3 S-M CH50-2-3 1.5 1.7 S-M CH100-1-3 1.5 1.7 S-M CH50-2T1,5-3 1.5 1.4 S-M CH50-2T2,5-3 2.5 2.4 S-M CH60-2-A-3 6 5.3 S-M CH100-3-2.5 2.5 5.3 S-M CH100-4-3-6 3 8.5 S-M CH50-2T2-3 2.0 1.8 S-M CH100-2T3-3 3.0 6.0 S-M CH100-4-5-6 5 13.7 S-M CH100-2T2-3 2.0 3.8

15

Mekano 50-2T Mekano 100-2T

Support Channels for Piping & heavy loads

S-M CH100-4-3 S-M CH100-4-5

S-M CH100-3**) Made to order only

S-M CH60-2**) Made to order only

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

�

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

��

��

�

��

��

��

��

�

��

��

��

��

��

��

�

��

��

��

Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Art. no. Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SS Type HDG SSS-M CH50-1-3 1371684 1371687 S-M CH50-2-3 1302506 1371689 S-M CH100-1-3 1371649 1371685 S-M CH50-2T1,5-3 1372186 1372181 S-M CH50-2T2,5-3 1372188 1372183 Double perforated S-M CH100-3-0.5 80912 80267 3mm thickness S-M CH50-2T2-3 1372187 1372182 S-M CH100-2T3-3 1372190 1372185 S-M CH60-2-A-3 1371432 1371430 S-M CH100-3-1 80913 80268 S-M CH100-4-3-6 1372525 1372526 S-M CH100-2T2-3 1372189 1372184 Single perforated S-M CH100-3-1.25 80914 80460 5mm thickness S-M CH60-2-B-3 1371431 1371429 S-M CH100-3-2.5 1372504 1372505 S-M CH100-4-5-6 1372530 1372531

Mekano 100-4Mekano 100-3Mekano 60-2Double and Single Perforated

Ordering list: Type states width, material Type states width, material Type states width, material Type states width, material Type states width, material Type states width and length Type states width and length Type states width and length thickness and length thickness and length thickness and length thickness and length thickness and length

Channels are included in Staad.Pro (contact us for library)

by Bentley by EDR

Channel Type: CH50-1 (1.5) CH50-2 CH100-1 (1.5) CH100-1 (1.5) CH50-2T CH50-2T CH100-2T CH50-2T CH100-2T CH60-2 CH100-3 CH100-4 CH100-4 Double (1.5mm) Single Double (1.5mm) (2mm) (2mm) (2.5mm) (3mm) (6mm) (2.5mm) (3mm) (5mm)AE 305 215 214 427 222 222 461 240 722 633 777 1023 1 642ITE 237 169 160 319 33 853 41 015 273 205 54 474 449 902 7 524 1 619 2 516 957 3 972 831 IXE 127 000 81 598 31 4961 629 922 35 062 71 015 521 996 88 245 789 750 220 797 1 073 537 1 596 639 2 428 086IYE 44 790 81 598 11 960 40 000 55 062 71 015 521 996 88 245 789 750 220 797 1 347 007 1 596 639 2 428 086WXP 5 082 2 663 6 299 12 599 1 682 2 168 7 844 26 278 11 792 4 902 17 267 28 016 42 284WYP 1 991 2 663 762 1 850 1 682 2 168 7 844 26 278 11 792 4 902 23 961 28 016 42 284CTP 158 113 106 213 2 492 3 101 12 217 4 171 19 343 1 121 578 44 467 70 680




Thickness 2,5mm 3mm

S-M CH50-2T S-M CH100-2T

Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. Weight Thickn. WeightType mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/m Type mm kg/mS-M CH50-1-3 1.5 1.3 S-M CH50-2-3 1.5 1.7 S-M CH100-1-3 1.5 1.7 S-M CH50-2T1,5-3 1.5 1.4 S-M CH50-2T2,5-3 2.5 2.4 S-M CH60-2-A-3 6 5.3 S-M CH100-3-2.5 2.5 5.3 S-M CH100-4-3-6 3 8.5 S-M CH50-2T2-3 2.0 1.8 S-M CH100-2T3-3 3.0 6.0 S-M CH100-4-5-6 5 13.7 S-M CH100-2T2-3 2.0 3.8

16

Art. no. Art. no. Type HDG SSS-M CH50-1-3 1371684 1371687

T: 1.5 mm T: 1.5 mm

T: 2 mm T: 1.5 mmT: 1.5 & 2 mm



Art. no. Art. no.Type HDG SSS-M CH50-2T1,5-3 1372186 1372181S-M CH50-2T2-3 1372187 1372182

Art. no. Art. no.Type HDG SSS-M CH100-2T2-3 1372189 1372184

Support Channels for Electrical, Instrument & HVAC

Standard length = 3 m.

Other lengths as per your specific material take off requirement (MTO) can be provided as speci-alty products.

Mekano 50-2

Mekano 50-1 Mekano 100-1

Mekano 100-2T Mekano 50-2T

17

T: 3 & 5 mm Art. no. Art. no.Type HDG SSS-M CH100-3-0.5 80912 80267S-M CH100-3-1 80913 80268S-M CH100-3-1.25 80914 80460S-M CH100-3-2.5 1372504 1372505

Art. no. Art. no. Type HDG SSS-M CH100-4-3-6 1372525 1372526S-M CH100-4-5-6 1372530 1372531

T: 2.5 mm

Support Channels for Piping & heavy loads

Mekano 100-4Mekano 100-3**) Made to order only

T: 6 mm A Art. no. Art. no. Type HDG SS S-M CH60-2-A-3 1371432 1371430 S-M CH60-2-B-3 1371431 1371429

Mekano 60-2**) Made to order only

Mekano 100-2T


T: 2.5 mm Art. no. Art. no.Type HDG SS-M CH50-2T2,5-3 1372188 1372183

Mekano 50-2T

T: 5 mm

Mekano 125-2T


BT: 3 mm

NEW!NEW!

18

Using Channels:

Choose starters and Channels according to the required load capacity

A guide to standard U- , L- , T- and Cantilever support

For complete spesifications and ordering list see data sheet page up to:

U: 09

CH100-2T2

88

CH60-2

C: 01

CH50-2T1,5

C: 02

CH50-2T2

C: 04

CH50-2T2,5

C: 05

CH60-2

CH100-3-2,5CH100-3-2,5

C: 07

CH100-2T3CH100-2T3CH100-2T3

C: 08CH100-4-3CH100-4-3

CH100-4-5 C: 09CH100-4-5

C: 03

CH100-2T2

T: 02

CH60-2

T: 03CH100-3

T: 01

CH100-2T2

U: 01

p 19 p 20

p 21

p 22

p 23

p 27

U: 10

CH100-2T2

p 28

U: 11

CH100-2T2

p 29

CH50-2-1,5

U: 02

CH50-2T2

U: 04

CH50-2T2

U: 05U: 03

CH50-2T1,5

U: 12

U: 13

CH100-1

CH50-2T1,5

CH100-1

p 24

U: 07

CH50-2T1,5

CH100-1

U: 08

CH50-2T1,5

p 26

U: 06

CH50-2T2

CH100-1

U: 15

CH50-2T2,5

U: 16

U: 14 L: 02

L: 03

L: 04

L: 05

L: 01CH100-2T2

T: 04

CH100-2T3

T: 05CH100-4-3

T: 06CH100-4-5

U: 17CH100-4-5

CH100-4-3

CH100-3-2,5

p 31

p 30

p 32

p 33

p 34 p 35

p 36

p 37

p 38

p 30 p 40

p 41

p 42

p 43

p 44

p 45

p 46

p 47

p 48 p 49

p 50

p 51

p 52

p 53

p 54 p 55

C: 06

p 25CH100-1

p 19 p 55

Mekano 100-4 VerticalMekano 100-4 Horizontal

Mekano 100-2T3 VerticalMekano 100-2T3 Horizontal



Mekano 50-2 VerticalMekano 50-2 HorizontalMekano 100-1 Horizontal

Mekano 50-2T-1,5 VerticalMekano 50-2T-1,5 HorizontalMekano 100-1 Horizontal

Mekano 100-2T-2 VerticalMekano 100-2T-2 Horizontal

Mekano 50-2T2,5 VerticalMekano 50-2T2,5 Horizontal

Mekano 50-2T2 VerticalMekano 50-2T2 HorizontalMekano 100-1 Horizontal

MG-U: 01

19

Items list:

Function Type Thickness (mm) Weight (kg) Art # HDG Art # SS # of Parts

A) Welded Starter S-M WB-200-CH50-2 6 0,9 1302514** 1371698 2

B) Mekano Channel S-M CH50-2 (*kg/m) 1,5 1,7* 1302506 1371689 1

C) Angle Bracket S-M AB 55x55-10 4 0,2 1302494 1371712 2

D) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 14

**) S-M WB-200-CH50-2 is delivered in carbon steel quality.

Load Capacity: Mekano Channel CH 50-2 (vertical) & CH 50-2 (horizontal)

Height(mm) Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 5.5 1.8 1000 500 3.2 1.1 1000 750 2.3 0.8 1000 1000 1.8 0.6 1000 1250 1.5 0.5

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.• We do not recommend to use channel CH50-2-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm.

U-SUPPORT: CH 50-2 -1,5mm

Thickness1.5 mm

A)

B)

C)Py(KN)

D)Width

Hei

ght

Px(KN)

S-M WB-200-CH50-2

20

S-M WB-200-CH50-2

Items list:

Function Type Thickness (.mm) Weight(kg) Art # HDG Art # SS #of Parts


B) Mekano Channel S-M CH50-2(*kg/m) 1,5 1,7* 1302506 1371689 1

C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1



Load Capacity: Mekano Channel CH 50-2 (v) & CH 100-1 (h)



U-SUPPORT: CH 50-2-1,5mm & CH100-1-1,5mm MG-U: 02

Thickness1.5 mm

A)

B)

C)

D)

Width

Hei

ght

Py(KN)

Px(KN)

MG-U: 03

21

Thickness1.5 mm

S-M WB-200-CH50-2

D)

Items list:



B) Mekano Channel S-M CH50-2T1,5(*kg/m) 1,5 1,4* 1372186 1372181 1




Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 50-2T1,5 (h)


• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.• We do not recommend to use channel CH50-2T-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm.

U-SUPPORT: CH 50-2T-1,5mm

A)

B)

C)

Width

Hei

ght

Py(KN)

Px(KN)

22

MG-U: 04

Thickness2 mm

Items list:



B) Mekano Channel S-M CH50-2T2(*kg/m) 2 1,8* 1372187 1372182 1




Load Capacity: Mekano Channel CH 50-2T2 (v) & CH 50-2T2 (h)

Height(mm) Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 7.3 2.4 1000 500 4.7 1.6 1000 750 3.5 1.2 1000 1000 2.8 0.9 1000 1250 2 0.7

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.• We do not recommend to use channel CH50-2T-2 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm.

U-SUPPORT: CH 50-2T-2mm

A)

B)

C)

Width

Hei

ght

D)

S-M WB-200-CH50-2

Py(KN)

Px(KN)

23

Items list:







Load Capacity: Mekano Channel CH 50-2T1,5 (v) & CH 100-1 (h)



U-SUPPORT: CH 50-2T-1,5mm & CH100-1-1,5mm MG-U: 05

Thickness1.5 mm

A)

B)

C)

Width

Hei

ght

D)

S-M WB-200-CH50-2

Py(KN)

Px(KN)

24

Items list:








Height(mm) Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 13,5 4,5 1000 500 9 3 1000 750 6,6 2,2 1000 1000 5,3 2,4 1000 1250 4,5 1,5


U-SUPPORT: CH 50-2T-2mm & CH100-1-1,5mm MG-U: 06

Thickness2 mm

A)

B)

C)

Width

Hei

ght

D)

S-M WB-200-CH50-2

Py(KN)

Px(KN)

Thickness1,5 mm

25

Items list:








Height(mm) H1 Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 13 4,3 1000 500 8,6 3,8 1000 750 6,2 2,0 1000 1000 4,2 1,4 1000 1250 4,0 1,3



A)

B)

C)

Width

Hei

ght

D)

S-M WB-200-CH50-2

Py(KN)

Py(KN)

Px(KN)

Thickness2 mm

Thickness1,5 mm

H1

H1

26

Items list:

Function Type Thickness (mm) Weight SS (kg) Art # HDG Art # SS #of Parts



C) Mekano Channel S-M CH100-1(*kg/m) 1,5 1,7* 1371649 1371685 1(2)




Height(mm) H1 Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 12 4 1000 500 8 2,6 1000 750 6 2 1000 1000 4 1,3 1000 1250 3,5 1,5



Thickness2 mm

Thickness1,5 mm

A)

B)

C)

Width

Hei

ght

D)

S-M WB-200-CH50-2

Py(KN)

Px(KN)

Py(KN)

Py(KN)H1

H1

H1

27

S-M WB-200-CH100-2T

Items list:


A) Welded Starter S-M WB-200-CH100-2T 4 1,6 Contact us 1301024 2

B) Mekano Channel S-M CH100-2T2 (*kg/m) 2 3,8* 1372189 1372184 1

C) Self Lock Boltset S-M LS-NU-M10x20 10 0,05 1371980 1371983 16

Mekano Channel CH 100-2T2 (v) & CH 100-2T2 (h)

Height(mm) Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 22.5 7.5 1000 500 14.2 4.7 1000 750 10.5 3.5 1000 1000 8 2.7 1000 1250 7 2.31000 2000 4.7 1.5

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.

U-SUPPORT: CH100-2T-2mm MG-U: 09

Thickness2 mm

A)

B)

C)

Width

Hei

ght

Py(KN)

Px(KN)

28

S-M WB-200-CH100-2T

Items list:






Height(mm) Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 21 7 1000 500 12,8 4,3 1000 750 9,4 3,4 1000 1000 7,4 2,4 1000 1250 6,2 2,11000 2000 4,0 1,3



Thickness2 mm

A)

B)

C)

Width

Hei

ght

Py(KN)

Py(KN)

Px(KN)

H1

H1

29

S-M WB-200-CH100-2T

Items list:






Height(mm) Width(mm) Capacity Py(KN) Capacity Px(KN) 1000 250 19,6 6,5 1000 500 12,0 4,0 1000 750 8,8 2,9 1000 1000 7,0 2,3 1000 1250 5,8 1,91000 2000 3,1 1,0



Thickness2 mm

A)

B)

C)

Width

Hei

ght

Py(KN)

Py(KN)

Py(KN)

Px(KN)

H1

H1

H1

30

MG-U: 12

Thickness2.5 mm

Items list:



B) Mekano Channel S-M CH50-2T2,5 (*kg/m) 2,5 5,3* 1372188 1372183 1




Load Capacity: Mekano Channel CH 50-2T2,5 (v) & CH 50-2T2,5 (h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1000 250 8.5 3.8 1.1 10 3 1000 500 5 3.3 1 9 3 1000 750 3.6 2.5 0.8 8 3 1000 1000 2.8 2.2 0.66 5 3 1000 1250 2.4 1.8 0.54 4 2.5

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation a P(y)=70% of capacity load is used to estimate max blast in x-direction.• We do not recommend to use channel CH100-1-1,5 as horizontal support for widths > 1,2 m. For these applications please substitute to either CH100-1 double or CH100-2T-2mm.

U-SUPPORT: CH 50-2T-2,5mm

A)

B)

C)

Width

Hei

ght

D)

S-M WB-200-CH50-2

Py(KN)

Px(KN)

31

MG-U: 13

Items list:



B) Mekano Channel S-M CH60-2 (*kg/m) 6 5,1* 1371432 1371430 1

C) Angle Bracket S-M AC CH60-2 4 1,7 1371436 1371435 4



Load Capacity: Mekano Channel CH 60-2(v) & CH 60-2(h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1000 250 15.5 4.6 1.38 8 7 1000 500 9 4.4 1.32 7 6 1000 750 6.5 3.8 1.14 7 6 1000 1000 5 3.3 0.99 5 6 1000 1250 4.2 2.8 0.69 3 6

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation r=450N/mm².

U-SUPPORT: CH 60-2-6mm

A)

B)

C)

D)

Width

Hei

ght

Thickness6 mm

S-M WB-200-CH50-2

Py(KN)

Px(KN)

32

MG-U: 14

Items list:




C) Splice Connector L S-M SC-L-CH100-3 4 0,8 1372510 1372511 4


E) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 2


Load Capacity: Mekano Channel 100-3 & CH100-3

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1000 250 20.4 11 3.3 12 12 1000 500 18 11.4 3.5 11 12 1000 750 13.2 9.8 2.5 11 12 1000 1000 10.8 8.1 2.4 10 12 1000 1250 9 6.7 2.0 9 11 1000 2000 7 4.2 1.3 4 10


U-SUPPORT: CH 100-3-2,5mm

E)

Thickness2,5 mm

A)

B)

C)

D)

Width

Hei

ght

S-M WB-150-CH100-3

Py(KN)

Px(KN)

33

MG-U: 15

Items list:



B) Mekano Channel S-M CH100-2T3 (*kg/m) 3 6* 1372190 1372185 1


Load Capacity: Mekano Channel CH 100-2T3 & CH100-2T3

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1000 250 30 13.1 4.0 12 14 1000 500 20.3 12.5 3.8 14 15 1000 750 15.2 11.1 3.3 14 14 1000 1000 12.4 9 2.7 13 14 1000 1250 10.4 7.8 2.3 12 13 1000 2000 7.0 4.5 1.35 11 12


U-SUPPORT: CH 100-2T-3mm

Thickness3 mm

A)

B)

C)

Width

Hei

ght

S-M WB-200-CH100-2T

Py(KN)

Px(KN)

34

MG-U: 18

Items list:


A) Welded Starter S-M WB-CH100-4 3 3 1372606** 1372601 2

B) Mekano Channel S-M CH100-4-3 (*kg/m) 3 8,3* 1372525 1372526 1


D) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 32

**) S-M WB-CH100-4 is delivered in carbon steel quality.

Load Capacity: Mekano Channel CH 100-4-3 & CH100-4-3

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1000 250 44 16 4.8 20 20 1000 500 36 20 6 25 25 1000 750 30 20 6 30 30 1000 1000 26 18 5.4 30 30 1000 1250 22 16 4.8 28 28 1000 2000 15 9 2.7 15 21



Thickness3 mm

A)

B)

C)

D)

Width

Hei

ght

S-M WB-CH100-4

Py(KN)

Px(KN)

35

MG-U: 19

Items list:







Load Capacity: Mekano Channel CH 100-4-5 & CH100-4-5

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1000 250 69 26 7.8 45 45 1000 500 57 32 9.6 50 45 1000 750 47 31 9.3 55 45 1000 1000 39 28 8.4 50 45 1000 1250 34 25 7.5 49 43 1000 2000 23 18 5.4 38 37 • Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on r = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on r = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation r=450N/mm².


Thickness5 mm

A)

B)

C)

D)Width

Hei

ght

S-M WB-CH100-4

Py(KN)

Px(KN)

36

Items list:


A) Welded Starter S-M WS-300-CH100-2T 4 2,5 Contact us 1301061 1

B) Mekano Channel S-M CH1002T2 (*kg/m) 2 3,8* 1372189 1372184 1


D) Gusset Plate S-M GP-CH-100-2T 5 1,2 59507 59506 1


Height(mm) Width(mm) Capacity DW Py(KN) Capacity Px(KN) 600 200 6,7 2,2 600 400 3,4 1,15 600 600 2,3 1,6 • Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.

L-SUPPORT: CH100-2T-2mm MG-L: 01

Thickness2 mm

A)

B)

Width

Hei

ght

C)

S-M WS-300-CH100-2T

Py(KN)

Px(KN)D)

37

Thickness2,5 mm

MG-L: 02

Items list:








Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 600 200 10,8 4,0 1,6 12 6 600 400 6 2,7 0,9 8 5,4 600 600 3,3 1,7 0,6 5 5,4

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation p=450N/mm².

L-SUPPORT: CH 100-3-2,5mm

A)

B)

C)

D)Width

Hei

ght

E)

S-M WB-150-CH100-3

Py(KN)

Px(KN)

38

Items list:





D) Gusset Plate S-M GP-CH-100-2T 5 1,2 59507 59506 1

Mekano Channel CH100-2T3 (v) & CH100-2T3 (h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 600 200 10 4,1 1,3 6 7 600 400 5 2,6 0,85 4 6 600 600 3,5 1,7 0,55 3 6


L-SUPPORT: CH100-2T-3mm MG-L: 03

Thickness3 mm

A)

B)

C)

Width

Hei

ght

Py(KN)

Px(KN)

S-M WB-300-CH100-2T

D)

39

MG-L: 04

Items list:



B) Mekano Channel S-M-CH100-4-3 (*kg/m) 3 8,5* 1372525 1372526 1



E) End Protection A-CH100-4 EP Plastic: PS60018 1


Load Capacity: Mekano Channel CH 100-4-3 (v) & CH100-4-3 (h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 600 200 22 9 3 20 15 600 400 12 6 2 10 14 600 600 7 3,5 1,1 7 14


L-SUPPORT: CH 100-4-3mm

Thickness3 mm

A)

B)

C)

D)

Width

Hei

ght

S-M WB-CH100-4

E)

Py(KN)

Px(KN)

40

Items list:









Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 600 200 34 14 4,5 25 23 600 400 17 8 2,5 14 22 600 600 10,5 5,4 1,5 11 22


MG-L: 05L-SUPPORT: CH 100-4-5mm

Thickness3 mm

A)

B)

C)

D)

Width

Hei

ght

S-M WB-CH100-4

E)

Py(KN)

Px(KN)

41

Thickness1.5 mm

MG-C: 01

Items list:



B) Mekano Channel S-M CH50-2T (*kg/m) 1,5 1,4* 1372186 1372181 1



Load Capacity: Mekano Channel CH 50-2T1,5

Lenght(mm) Capacity DW Py(KN) Piping Px(KN) 200 1,5 1 400 0,8 0,6 600 0,5 0,2 • Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.

CANTILEVER SUPPORT: CH 50-2T-1,5mm

Width

B)

A)

C)

Py(KN)

Px(KN)

S-M WB-200-CH50-2

42

MG-C: 02

Items list:






Load Capacity: Mekano Channel CH 50-2T2

Lenght(mm) Capacity DW Py(KN) Piping Px(KN) 200 2,0 0,65 400 1,0 0,35 600 0,7 0,21

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.

CANTILEVER SUPPORT: CH 50-2T-2mm

Thickness1.5 mm

Width

B)

A)

C)

Py(KN)

Px(KN)

S-M WB-200-CH50-2

43

Thickness2 mm

MG-C: 03

Items list:


A) Welded Starter S-M WB-IN-225-CH100-2T 5 1,4 Contact us 1301059 1



Load Capacity: Mekano Channel CH100-2T2

Lenght(mm) Capacity DW Py(KN) Piping Px(KN) 200 7,0 2,3 400 3,6 1,2 600 2,3 0,7 800 1,8 0,6 1000 1,4 0,5 • Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Max loads Y(KN) and X(KN) are non-concurrent loads.

CANTILEVER SUPPORT: CH100-2T-2mm

B)

Width

A)

C)

S-M WB-IN-225-CH100-2TPy(KN)

Px(KN)

44

Thickness2.5 mm

MG-C: 04

Items list:






Load Capacity: Mekano Channel CH50-2T2,5

Lenght(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 200 2,4 1,9 0,6 5,5 10,0 400 1,2 0,9 0,3 2,5 10,0 600 0,8 0,6 0,2 1,8 10,0 • Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation p=450N/mm².

CANTILEVER SUPPORT: CH50-2T-2,5mm

B)

Width

A)

C)

Py(KN)

Px(KN)

S-M WB-200-CH50-2

45

Thickness6 mm

MG-C: 05

Items list:



B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1



Load Capacity: Mekano Channel CH60-2

Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 200 4,4 3,4 1,1 10,5 10,0 400 2,2 1,7 0,6 5,5 10,0 600 1,5 1,1 0,4 3,5 10,0 • Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation p=450N/mm².

CANTILEVER SUPPORT: CH60-2-6mm

Width

A)

B)

C)

Py(KN)

Px(KN)

S-M WB-200-CH50-2

46

S-M WB-150-CH100-3

Thickness2,5 mm

MG-C: 06

Items list:



B) Mekano Channel S-M CH100-3-2,5 (*kg/m) 2,5 5,7* 1372504 1372505 1


D) End Protection A-CH100-3 EP 2 0,1 1372506 1372507 1


Load Capacity: Mekano Channel CH100-3-2,5

Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 200 12,0 9,0 3,0 30 15 400 6,0 4,2 1,6 15 15 600 4,3 3,2 1,0 10 15 800 3,3 2,7 0,8 7,5 15 1000 2,2 2,0 0,7 6 15

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation p=450N/mm².

CANTILEVER SUPPORT: CH100-3-2,5mm

Width

A)

B)

C)

D)

Py(KN)

Px(KN)

47

Thickness3 mm

Thickness3 mm

MG-C: 07

Items list:


A) Welded Starter S-M WB-IN-225-CH100-2T 5 1,4 Contact us 1301059 1



Load Capacity: Mekano Channel CH100-2T3

Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 200 11,0 8,0 2,6 25,0 25,0 400 5,4 4,0 1,3 12,2 25,0 600 3,6 2,7 0,9 8,0 25,0 800 2,7 2,0 0,7 6,0 25,0 1000 2,1 1,6 0,6 5,0 25,0


CANTILEVER SUPPORT: CH100-2T-3mm

Width

A)

B)

C)

Py(KN)

Px(KN)

S-M WB-IN-225-CH100-2T

48

S-M WB-CH100-4

Thickness3 mm

MG-C: 08

Items list:



B) Mekano Channel S-M CH100-4-3(*kg/m) 3 8,5* 1372525 1372526 1

C) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 8

D) End Protection A-CH100-4 EP Plastic: PS60018 1


Load Capacity: Mekano Channel CH100-4-3




Width

A)

B)

C)

Py(KN)

Px(KN)

49

S-M WB-CH100-4

Thickness3 mm

MG-C: 09

Items list:




C) Self Lock Boltset S-M HE-NU-M10x130 10 0,05 N/A 1372950 8

D) End Protection A-CH100-4 EP Plastic: PS60018 1


Load Capacity: Mekano Channel CH100-4-5




Width

A)

B)

C)

Py(KN)

Px(KN)

50

Items list:






Height(mm) Width(mm) Capacity DW Py(KN) Piping Px(KN) 600 200 3,10 1,0 600 400 2,30 0,7 600 600 1,60 0,5 600 800 1,20 0,4

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• Please note that the capacity calculation for T-support is for even loading on both sides.• Max loads Y(KN) and X(KN) are non-concurrent loads.

T-SUPPORT: CH100-2T-2mm MG-T: 01

Thickness2 mm

A)

B)

Width

Hei

ght

C)

S-M WB-200-CH100-2T

Py(KN)Py(KN)

Px(KN)Px(KN)

51

S-M WB-200-CH50-2

MG-T: 02

Items list:



B) Mekano Channel S-M CH60-2(*kg/m) 6 5,3* 1371432 1371430 1

C) Angle Bracket S-M AC CH60-2 4 1,7 1371436 1371435 2



Load Capacity: Mekano Channel CH 60-2 & CH 60-2

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1500 300 3,00 2,10 0,70 6,00 2,20 1500 600 1,50 1,20 0,40 3,90 1,30 1500 900 1,00 0,75 0,25 2,40 0,90 1500 1200 0,75 0,50 0,13 1,80 0,60

• Norsk Standard code NS3472/Eurocode 03/Norsok.• Capacity (KN) is calculated using point load on the centre of the horizontal support.• Piping: ULS – Ultimate Limit state – Load factor 1,3 – Material factor 1,15 on p = 210N/mm².• Other disciplines: SLS -. Load factor 1,0 – Material factor 1,15 on p = 210N/mm².• Deflection allowance piping: L/300 or 3 mm. Most conservative used.• Deflection allowance other disciplines: L/200• Section properties are based on effective values reduced for perforations.• For blast calculation p=450N/mm².• Please note that the capacity calculation for T-support is for even loading on both sides.

T-SUPPORT: CH 60-2-6mm

A)

Width

Hei

ght

Thickness6 mm

B)

C)

D)Py(KN)Py(KN)

Px(KN)Px(KN)

52

Width

MG-T: 03

Items list:



B) Mekano Channel S-M CH100-3-2,5 (*kg/m) 2,5 5,7* 1372504 1372505 1

C) Splice Connector T S-M SC-T-CH100-3 4 1,1 80976 80470 2




Load Capacity: Mekano Channel CH100-3-2,5(v) & CH100-3-2,5(h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1500 300 3,5 2,7 0,9 4,9 1,6 1500 600 3 2,5 0,8 4,9 1,6 1500 900 2,8 2,2 0,7 4,9 1,6 1500 1200 2,2 1,6 0,5 4,8 1,6


T-SUPPORT: CH 100-3-2,5mm

Thickness2.5 mm

Hei

ght

A)

S-M WB-150-CH100-3

B)

D)

C)

E)

Py(KN)Py(KN)

Px(KN)Px(KN)

Width

53

Items list:





Mekano Channel CH100-2T3 (v) & CH100-2T3 (h)

Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1500 300 4,9 4,7 1,4 7,5 2,5 1500 600 3,6 2,7 0,9 7,5 2,5 1500 900 2,4 1,8 0,6 6 2 1500 1200 1,8 1,3 0,43 4,5 1,5


T-SUPPORT: CH100-2T-3mm MG-T: 04

Width

Thickness3 mm

S-M WB-200-CH100-2T

Hei

ght

A)

B)

C)

Py(KN)Py(KN)

Px(KN)Px(KN)

54

MG-T: 05

Items list:




C) Splice Connector T S-M SC-T-CH100-4 6 1.2 1372542 1372543 2





Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1500 300 7,1 6 3 11 3,5 1500 600 6,9 6 3 11 3,5 1500 900 5,7 4,2 1,4 10,5 3,4 1500 1200 4,25 3,6 1,2 10,5 3,4



Thickness3 mm

A)

B)

C)

D)

Width

Hei

ght

S-M WB-CH100-4

E)

Py(KN)Py(KN)

Px(KN)Px(KN)

55

MG-T: 06

Items list:




C) Splice Connector T S-M SC-T-CH100-4 6 1,2 1372542 1372543 2





Height(mm) Width(mm) Capacity DW Py(KN) Piping Py(KN) Piping Px(KN) Blast Py(KN) Blast Px(KN) 1500 300 11 9,9 3,3 17,5 6 1500 600 10,8 9,6 3,2 17,5 6 1500 900 8,6 6,6 2,3 17,5 6 1500 1200 6,5 4,9 1,6 16 5,5



Thickness3 mm

A)

B)

C)

D) Hei

ght

S-M WB-CH100-4

E)

Py(KN)Py(KN)

Px(KN)Px(KN)

Width

56

Mekano 100-1

Mekano 50-1

Mekano 50-2

Typical use for supporting E, I & T and HVAC

Splice Connectors for channelsFor Mekano channel S-M CH50-2 and CH50-1

HDG SS Weight Type Art. no. Art. no. SS (kg)S-M SC-CH50-2 84824 81992 0.4S-M SC-CH50-1 1372763 1302595 0.3

195

Holes 11 x 35

9019

5

90 105

105

300

Holes 11 x 35

9019

5

90 105

105

105

250

Holes 11 x 35

145

105

105

105

40

40

145

Holes 11 x 35

145

105

105

40

40

Holes 11 x 35

30° 40

Holes 11 x 35

45° 40

Holes 11 x 3560°

40

200

40

4M10x20

2(4)M10x20

Fits CH50-2CH50-2T

Fits CH50-1

HDG SS Weight Type Art. no. Art. no. SS (kg)OE100 SC-NO 1371681 0,3OE100 SC* 1371678 1371683 0.5*) Without notches.

Splice Connectors for channels For Mekano channel S-M CH100-1

Fits CH100-1

4(6-8)M10x20 Without

notches.

Order no. see also page 14 +15.

HOT WORK

Page 12

COLD WORK

Page 14

2M10x20

Material thickness: 4 mm.

40

Holes11 x 35

55

55

Angle Bracket Fit all channels. See also page 64. HDG SS Weight Type Art. no. Art. no. SS (kg)S-M AB 55x55-10 1302494 1371712 0.1

Mekano 100-2T bolted to Mekano 100-1. The bolts can be mounted from both sides.

Two Mekano 100-2T: Because of the large holes the

channels are easy to assemble.

57

Use 1 part

Compare the load data for Mekano 50-2T and 100-2Twith other channels! Page 14-15.

Mekano 50-2T bolted to Mekano 100-1. The bolts can be mounted from both sides.

Nuts and bolts fit through slots for easy fastening

The large holes make it easy to bolt other parts to the channel.

•

Ø 2232 mm

Splice Connectors for channel HDG SS Weight Type Art. no Art. no. SS (kg)S-M SC-100-5 1372535 1372534 1.2

New Channels

Mekano 50-2T and 100-2T are the first perforated triangle shaped channels in the marketplace.

Mekano 50-2T and 100-2T are lightweight channel system with improved load capacity and torsion strength.

NEW: Mekano 125-2T is the newest addition to the patented family of triangular perforated channels. It is suitable for heavier loads and for piping. Please contact us for deals.

Standard locking bolts M10x20 are to be used.The large holes on one side of the triangle make the channel easy to assemble, much like a regular angle channel.

The Mekano 50-2T and 100-2T complete the MultiGrid system, offering even more opportunities in order to optimize our system to fit your requirements.

Patented design

•

•

•

•

•

NEW!NEW!

Mekano 125-2T

Mekano 100-2T

Mekano 50-2T

58

Mekano 60-2

Connection L60 to existing HE– Main Steel(when drilling is prohibited)

Slide-step 25mm to fit.

Preferred solution where the area directly underneath is occupied.

Order no. see page 15.

Mekano 60-2 solutions on Ula (BP Norway) Mekano 60-2 solutions on Ula (BP Norway)

Angle Connector HDG SS Weight Type Art. no. Art. no. SS (kg)S-M AC-CH60-2 1371436 1371435 0.33

Beam Clamp-set for ”Main & Secondary steel” HDG SS Weight Type Art. no. Art. no. SS (kg)S-M BC-CH60-2 1371421 1371420 1.66

59

Mekano 60-2 & Details

Connection L60 to Deck Stringers

Connection L60 to RHS(when drilling is prohibited)

Please ask for our MultiGrid™Site Support Solution for Small Bore Pipes(Best Practice / Work Instruction) and ourPipe Support Standard Parts catalogue or download fromwww.oglaend-system.com

HOT WORK

Page 12

COLD WORK

Page 14

60

Mekano 100-3

MultiGrid™ Bracing EquipmentThe unique flexibility in MultiGrid makes bracing a simple bolt job. Various standard brackets in combination with channels or threaded rods are tailored to fit the requirements. Ask for alternatives.

Threaded Rod

Type Art. no. SSS-M TR-06-1000 1900290S-M TR-10-1000 1371416

8M10x20

Splice Connectors for 100-3 HDG SS Weight Type Art. no. Art. no. SS (kg)S-M SC-CH100-3 1372509 1372508 1.2

Supplied in pairs

Nyhamna Power StationAukra, NorwayIn 2006 it was decided that Norwegian main grid owner Statnett was to build two gas turbine driven power plants on the north-west coast of Norway. The three production units were expected to produce 150 MW.

Late 2007 Oglaend System was contacted by E&I Contractor Siemens Installation, and based on their sketch our R&D department developed a solution including MultiGrid™ support, cable ladders Type OE, trefoil cable cleats Type SmartCleat and earth links.

The Mekano 100-3 channel along with accessories was the best choice for the 4.5 meter tall towers. The channels were easy to handle and assemble due to the light weight of the 2.5 mm thick non-magnetic AISI 316 L stainless steel. Even if none of the items exceeded the maximum man-handling weight of 25 kg the final construction was firm and strong.

HINGE OE100-HHArt. no. 1371680 SS


61


Splice Connector L 4 mmS-M SC-L-CH100-3 1372511 SS 1372510 HDG

Patented, study the Nonie principle below.

Splice Connector T 4mmS-M SC-T-CH100-3 80470 SS 80976 HDG

90

90195

215

195

350

Channel BracketS-M CB-100-500 1372503 SS 1372502 HDG Max load 500 kg

Channel BracketS-M CB-100-200 1372499 SS 1372498 HDGMax load 600 kg Channel BracketS-M CB-100-350 1372501 SS 1372500 HDGMax load 500 kg

200

350

500

The Nonie-principle = Enhanced Flexibility

The slots in combination with our self-lock bolt-sets en-sure precise levels and eliminates risk of sliding.

Oglaend System´s patented Nonie-principle enables adjustments in step of 5 mm, utilizing the hole combinations between the Mekano Channel and the L-connector.

CC 25 mm

0 mm

+5 mm

+10 mm

CC

100

CC

100

CC

100

CC 20

Square slots (10.3x10.3mm) for CH 100-3

End ProtectionA-CH100-3 EP 1372507 SS1372506 HDG90

Bolted starter bracket S-M BS-CH100-3 1372492 SS 1372493 HDG

Goal post

HOT WORK

Page 12

COLD WORK

Page 14

CH100-3 wth CC 25 mm against Splice L with CC 20mm bolt-holes = 5mm steps

Splice Connector U 4 mmS-M SC-U-CH100-3 1372513 SS 1372512 HDG

150

200 150

62

Bracing Connector set for 15-60°Type: S-M SC-V-CH100-4-AArt.No. 1372546 SS

Splice Connector T Type: S-M SC-T-CH100-4Art. No. 1372543 SS

Plastic End ProtectionType: A-CH100-4 EPArt. No. PS60018

Mekano 100-4

Notches for positioning

Mekano 100-4 Cut marking toolMeasuring tool. Aid for cutting of Mekano 100-4. It is important that 90° cuts are done exactly between 2 holes. Cut tolerance: 25mm +0 / -1mm (both sides of cut) Type: S-M CD-CH100-4. 316L Art. No: 1372533

All cutting of profile Mekano 100-4 to be by 25mm steps. (L1 = Always ending with ..00,-..25,-..50 or ..75mm)

Recommended exstra length for adjustments on site (dim. L): ”L” = round up ”L1” ~ 25mm and add 25mm = L min. 25 to L max. 50mm.

Example L1= 717mm = (717 + 25 ~ 25) = 750mm cut Length. - Result “L” = 33mm

How to cut Mekano CH 100-4

LL1

CC 20

Circle slots (Ø 10.3mm) for CH 100-4

CC 25 mm

NONIE = Simple flexibility. Study the Nonie principle on page 61.


8 x M10x130mmSNI

4 x M10x130mmSNI

63

Bracing Connector for 15-60°Type: S-M SC-V-CH100-4-BArt. No. 1372549 SS

4 x M10x130mm

Splice Connector L Type: S-M SC-L-CH100-4316L Art.No. 1372540HDG Art No. 1372539 (NA Stock)

Patented, study the Nonie principle page 61.

Splice ConnectorType: S-M SC-CH100-5 SSArt. No. SS 1372534 / HDG 1372535

Order two to splice one channel


Bolted Main Steel connection

Fit all sizes from HE240A/B to HE1000A/B(& similar beam with 240-300mm flange-width)

Range: HE240A/B – HE1000A/B

Shim plates setup:

20mm – Thickness = mm shim-plates needed. (Shim Size: 2 a 3, 2 & 1mm)

Thickness

Bolts 6 x M16x65

6 x M16x65

Adjustable by 5mm step sideways

(HE240B)

Mekano CH 100-4 as alternative starter between stringersStep 1. Plates (110x110x6mm x 2 ) to be welded to stringer. Step 2. CH 100-4 to be placed and welded to plates.Step 3. Apply masking tape. (Not covering welds!)

Minimum clearence 25mm

To splice connect CH100-4 use 8 through bolts.Type: S-M HE-NU-M10x130. Art. no.: 1372950 as bolt set with nut.

Splice Connectors for channel HDG SS Weight Type Art. no Art. no. SS (kg)S-M SC-CH100-5 1372535 1372534 1.2

Bolted StarterType: BC-MS-CH100-4316L Art. No. 1372520

HOT WORK

Page 10

COLD WORK

Page 12

SNI

8 x M10x130mmSNI

8 x M10x130mmSNI

SNI

64

Various Angle Brackets fits all channelsAlso see page 66.

11x35 6x35

Type HDG SS Weight Art. no. Art. no. SS (kg)S-M AB 55x55-10 1302494 1371712 0.11OE-FC-A40x33-10/10 89908 89907 0.14OE-FC-A40x23-10/6 89917 89916 0.05

Fixing ClampsFor fastening ladders to brackets and supports.Gives a safe earth connection between ladder and bracket.

Other Fixing Clamps for Lad-ders and Trays see our pro-duct catalogues.

HDG SS Weight Type Art. no. Art. no. SS (kg)OE FC-CHM10 1302482 1371705 0.3

Fixing Clamp for channel-traverse. Supplied in pairs.

HDG SS Weight Type Art. no. Art. no. SS (kg)S-M FC-CH 1302483 1302598 0.07


11x35

Fits all


Fixing Clamp for traverse channels

11x35

MultiGrid®: Electro, Instrumentation & Telecom

Channel Bracket for LOE, RZE ladders and SPB trays. Type no. indicates ladder width. Safety factor 2.

HDG SS Maks last Weight Type H + L Art. no. Art. no. Max. load SS S-M CB-30-100 38 + 129 1302437 1371791 180 kg 0.36 kg S-M CB-30-150 38 + 179 1302438 1371792 180 kg 0.42 kg S-M CB-30-200 38 + 229 1302439 1371793 200 kg 0.48 kg S-M CB-30-300 50 + 329 1302440 1371794 200 kg 0.67 kg S-M CB-30-400 50 + 429 1302441 1371799 200 kg 0.81 kg

L

H

How to use:Fits both Mekano and UNO

40

40

33

40

23

Holes11 x 35

55

55


Fits all

Fixed back to back with two bolts M10 giving shear strength pr. bolt: 2000kg

Safety-factor = 2Single Double

Traverse Support

Kg

65

SC-TW 40/290

213 290

5 mm

SC-TW 90/213

4 mm

SC-TW 40/390

Choose channels according to the required load capacity.

390

HDG SS Weight Type Art. no. Art. no. SS (kg) S-OE/SPB-RF-IF-97 85082 0.04 S-OE/SPB-RF-IF-177 60381 0.06

Interface between tray and OE-ladder

11x11

7x7

97

177

HDG SS Weight Type Art. no. Art. no. SS (kg) S-SPB CB-TW 1302172 1371818 0.27

Channel Bracket Twisted

Gives a clean and professional installation with no descenders. Fits all Mekano Channels.

HDG SS Weight Type Art. no. Art. no. SS (kg) S-M SC-TW 90/213 1302515 1371700 0.5S-M SC-TW 40/290 1302517 1371702 0.4S-M SC-TW 40/390 84167 84168 0.6

Directional adjustors

66

HDG SS Weight Type Art. no. Art. no. SS (kg)

S-M AB 50x50-10/6 1372761 1371817 0.1

S-M AB 50x50-6 83410 84386 0.1

S-M AB 55x55-10/6 1302170 1371816 0.2

S-M AB 55x55-10 1302494 1371712 0.2

S-M AB 65x80-10/12 1372759 1371713 0.2

S-M AB 65x80-10/12B 1372762 1371714 0.3

S-M AB 65x60-Z 1302501 1371715 0.3

S-M AB 110x120-10/6 1302503 1371717 0.5

End piece for Channel S-M CH100-1-3000

HDG SS Weight Type Art. no. Art. no. SS (kg)S-M AB 60x60-10/12 1302502 1371716 0.3

Angle Brackets Fit all channels

3M10x20

To combine 6 and 10mm bolts.

2M10x20

2M10x20

2M6x12

2M10x20

2M10x20

2M10x20

1M6x12









1M6x12

+1M10x20

Holes11 x 20 7 x 22

Holes7 x 30

Holes11 x 35 7 x 20

Holes11 x 20 7 x 20Ø 11

14 x 2511 x 25

50

25

52

5250

40

40

40

30

50

50

55

55


Holes11 x 35

Holes11 x 3513 x 25

80

65

55

55

60

Holes11 x 3513 x 24

Holes13 x 2511 x 35

80

65

60

60

60

80

60

115

125

65

65

2(4)M6x12

Tray Wall SHS

B

B

67

Miscellaneous Items

A: Cantilever Arm for 100 mm trayB: Channel Bracket for 100 mm tray

BA

2M10x20

2M6x12

HDG SS AL Weight Type Art. no. Art. no. Art. no. SS (kg) S-SPB CA-100 1302320 1302323 0.4 kg S-SPB CB-100 1302216 1302218 0.3 kg

7 x 20

11 x 35

5 mm material 11 x 20

62

4040

2M6x12

Tray Bracket for SPBE/SPB-RF-100

HDG SS AL Weight Type Art. no. Art. no. Art. no. SS S-SPB SB-STUD 1372902 1372903

SPB Wall Support BracketType states tray width B and type SHS it will fit using a square U-bolt. See page 79 ordering U-bolts. SHS: Square Hollow Section. Can also be mounted directly to a wall.

HDG SS Weight Type Fits SHS Art. no. Art. no. SS (kg)S-SPB SB-85-SHS-50 1302150 1371795 0.12S-SPB SB-111-SHS-80* 1302154 1371800 0.15S-SPB SB-135-SHS-100 1302151 1371796 0.18S-SPB SB-155-SHS-120 1302152 1371797 0.40S-SPB SB-175-SHS-140 1302153 1371798 0.45*) Fits tray width 100-150

Earth Link “Jumpers” Art. L Ø Type no. Length mm Screw A-M EL-100/6-4 85813 100 6 4 A-M EL-100/6-6 85814 100 6 6 A-M EL-100/10-10 85815 100 10 10 A-M EL-300/10-10 85816 300 10 10 A-M EL-100/10-16 85817 100 10 16 A-M EL-300/10-16 85818 300 10 16Other dimensions on request.

L

Ø 13

75

50

50M12

75

T = 5mmWelding zone to be repainted

Ø

Earthing Lug SS SS Type Art.no. WeightA-M WB-EL 87640 0.2 kg

Earthing Boss CS SS SS Type Art.no. Art.no. Weight A-M EB-EL-50x50x12 83427 83428 0.8 kg

90

50

310

205

105

90

Holes 11 x 35

905060°

Holes 11 x 35

9050

45°

Holes 11 x 35

9050

30°

200

9050

90

110

225

9050

Holes 11 x 35

9050

225

7750

3515

119 mm

35

119 109

90

50

310

205

105

90

Holes 11 x 35

905060°

Holes 11 x 35

9050

45°

Holes 11 x 35

9050

30°

200

9050

90

110

225

9050

Holes 11 x 35

9050

225

7750

3515

119 mm

35

119 109

2(4-8)M10x20

OE100 SA-VE

Fits CH100-1

Fits CH100-1

4(6-8)M10x20

SPLICE ANGLE VERTICAL

SPLICE ANGLE HORIZONTAL

HDG SS Weight Type Art. no. Art. no. SS (kg)OE100 SA-VE 1302493 1371711 0.8


HDG SS Weight Type Art. no. Art. no. SS (kg)OE100 SA-HO 1302534 1371682 0.7


657 x 30

11 x 20

100

30

11 x 35

Crosssection

mm2

Pressure Plate (sleeve) on request. Type: S-M BC-U-PP Art. no. 1371804

SS Max Weigth Type Art. no. load (kg) SS (kg) S-M BC-U-25/6 1371801 350 S-M BC-U-25/10 1371802 350 S-M BC-U-35/10 1371803 350

Beam Clamp Tapered M10 screw included

Y

Press Clamp for Beam ClampSupplied in pairs.

Materialtykkelse HDG SS Type Material thickness Art. no. Art. no.S-M BC-FC 4 mm 85196 85197

Beam ClampMaks. belastning / Max. load weight = 800 kg.

For various tasks and for combination with channels

A

D max

D min

D

min/max 48

24

Load600 kg

A For D HDG SS Type mm min/max Art. no. Art. no. mm S-M BC-160 260 88 - 160 85621 85622 S-M BC-300 390 102 - 300 85623 85624

68

Beam Traverse For D HDG SS Max Type min/max Art. no. Art. no. Load (kg) mm S-M BT-CH100-3 100 - 350 1372494 1372495 1000

Channel Angle For directional adjustment (t = 3mm)

HDG SS Max Type Art. no. Art. no. Load (kg) S-M MG-CA 80926 1372497 1000

Beam Clamp for Beam Traverse HDG SS Type Art. no. Art. no. S-M BC-CH100-3 1372490 1372491

4

19

M 10

25/35

M6/M10

Load1000 kg

Load350 kg

FOR COLD WORK

Beam Clamp for Stringer HDG SS Max Type Art. no. Art. no. Load (kg) S-M BC-ST-HD 86889 86877 350

Y

Y

YLoad350 kg

D

min/max

Pressure Plate (sleeve) on request. Type: S-M BC-U-PP Art. no. 1371804

69

Please study the catalogue range page 2. Contact us or simply download on:


MultiGrid® offers you the freedom in choice of discipline support

SS Weight Type Art. no. SS A-H HC-UN 1302393 0.5 kgPlastic pad: Art. no.: 1302394

Prepared for circular

channels.

Note the different use of the plastic pad.

Prepared for square

channels.

Universal Strap-BracketA pair of brackets and levasint coated cable ties are all you need to fix both square and circular HVAC pipes of all sizes to the support system. Plastic pads insulate against both noise and corrosion.

MultiGrid®: HVAC

70

SS Weight Type (H) Art. no. SS (kg) A-H HC-LI-125 87613 0.2 A-H HC-LI-160 87614 0.3 A-H HC-LI-180 87615 0.3 A-H HC-LI-200 87616 0.3 A-H HC-LI-230 87617 0.4 A-H HC-LI-250 87618 0.4 A-H HC-LI-315 87619 0.5 A-H HC-LI-400 87620 0.6 A-H HC-LI-500 87621 1.0 A-H HC-LI-600 87622 1.2 A-H HC-LI-630 87877 1.2 A-H HC-LI-800 87623 1.5

HVAC Clamps When ordering, add H = Outside duct diameter + insulation if relevant. HVAC clamp is supplied for duct dimensions from 160 - 850 mm / perforated 125-800mm.

Levasint coated cable ties: Use for example 19mm Band-it AE-416/ AE-436 and the lock AE 456

HDG SS Weight Type (H) Art. no. Art. no. SS (kg) A-H HC-160 79167 79168 0.6 A-H HC-200 78684 78689 0.7 A-H HC-250 78685 78690 0.8 A-H HC-315 78686 78691 1.1 A-H HC-355 78703 78707 1.2 A-H HC-400 78687 78692 1.3 A-H HC-450 78704 78708 1.5 A-H HC-500 78688 78693 16 A-H HC-600 78705 78709 1.6 A-H HC-850 78706 78710 2.7

Based on our standard MultiGrid® details we offer custom made

HVAC solutions

71

I.V.A.R. waste water plant in Mekjarvik, Randaberg

Choose channels according to the required load capacity. Optimised use of Mekano® channels give minimum weight and cost.

Adjustable to fit 25mm vertical -Perforated angle.

Pre-set hight = 100mm (range = +25/ -15mm)

Slide or/and rotate 180° to fit 25mm perforated angle.

Please ask for our MultiGrid®

Pipe Support Standard Parts

Catalogue

MultiGrid®Pipe Support Standard Details

72

Bolted Line Guide/Hold down (LG & HD) Type: OPS-SD LG05Range: Pipe Shoes 2”– 8”HDG 355 & SS 316L

Clamped Shoe (2) Adjustable Type: OPS-SD PS02Range Pipe 2”– 8”HDG 355 & SS 316L

Pipe Clamp Perforated and Adjustable Type: OPS-SD PC13Range Pipe 1/2”– 2”HDG 355 & SS 316L

Bolted Line Guide/Hold down Type: OPS-SD PG01Range: Pipe Shoes 2”– 8”HDG 355 & SS 316L

Pipe Clamps perforated and adjustable Dim. ID Clamps HDG SS WeightType inch mm Art.no. Art.no. SS (kg)OPS SD-PC13-015 1/2 141 PS43755 PS43750 0.7OPS SD-PC13-020 3/4 170 PS43756 PS43751 0.7OPS SD-PC13-025 1 222 PS43757 PS43752 0.8OPS SD-PC13-030 1 1/4 222 PS43758 PS43753 0.8OPS SD-PC13-040 1 1/2 222 PS43759 PS43754 0.8OPS SD-PC13-050 2 222 PS43761 PS43760 0.9

OPS SD-PC13 – Pipe Clamp With Adjustable Bolted Bracket

Sleeves to be removed for Grip function(pre-set Non-Grip)

NOTE: Req. bolt torque for M10 Self-Lock nuts= 30Nm

Clamped Shoe (2) Type: OPS-SD PS05Range Pipe 2”– 8”HDG 355 & SS 316L

U-BOLTS ordering list: Type/ For Ø Art. no. dim: mm: HDG SS 1/2’’ M6 23 1302347 1302403 1/2’’ M8 23 1302348 1302404 3/4’’ M8 28 1302349 1302405 3/4’’ M10 28 1302350 1302396 1’’ M8 36 1302351 1302406 11/4’’ M10 44 1302352 1302407 11/2’’ M10 50 1302353 1302408

Type/ For Ø Art. no. dim: mm: HDG SS 2’’ M10 62 1302354 1302409 2’’ M12 62 1302355 1302410 21/2’’ M10 78 1302356 1302411 21/2’’ M12 78 1302357 1302412 3” M12 91 1302358 1302413 31/2’’ M12 102 1302359 1302414 4’’ M12 117 1302360 1302415

73

Pipe Clamp with Perforatet Base Plate Type: OPS SD-PC21Range Pipe 1/2”– 2”. HDG 355 & SS 316L

Pipe Clamp With Perforatet Base Plate Type: OPS-SD PC23Range Pipe 3”– 4”HDG 355 & SS 316L

Type: OPS-SD PC23

with 50mm longer

base plate

Type: OPS-SD PC21

with 50mm longer base plate

U-Bolt Grip Type: OPS-SD PC04Range Pipe 1/2”– 8”HDG 355 & SS 316L

U-Bolt Non-GripType: OPS-SD PC03Range Pipe 1/2”– 8”HDG 355 & SS 316L

MultiGrid U-Strap Adapter Type: OPS-SD AD01-BRange : U-Strap 2” & 5”HDG 355 & SS 316L

MultiGrid AdapterU-Bolt & U-StrapType: OPS-SD AD01-ARange: U-Bolt 1/2”– 2”Range : U-Strap 6” & 8”HDG 355 & SS 316L

Pipe Clamps for stdr. ST-pipes. For Cu/Ni on request.

Dim. B HDG SS WeightType inch mm Art. no. Art. no. SS (kg)OPS SD-PC21-015 1/2 30 PS44105 PS44100 0,5OPS SD-PC21-020 3/4 30 PS44106 PS44101 0,5OPS SD-PC21-025 1’ 30 PS44107 PS44102 0,6OPS SD-PC21-030 11/4 30 PS44108 PS44103 0,6OPS SD-PC21-040 11/2 30 PS44109 PS44104 0,7OPS SD-PC21-50 2 30 PS44111 PS44110 0,8OPS SD-PC23-050 2 30 PS43905 PS43900 OPS SD-PC23-065 21/2 30 PS43906 PS43901 OPS SD-PC23-080 3 30 PS43907 PS43902 1,2OPS SD-PC23-090 31/2 30 PS43908 PS43903 1,5OPS SD-PC23-100 4 30 PS43909 PS43904 1,8

B

U-Bolt and U-Strap Adapters HDG SS WeightType Art. no. Art. no. SS (kg)OPS SD-AD01-A PS60053 PS60051 0,3OPS SD-AD01-B PS60052 PS60050 0,8

U-Strap Non-GripType: OPS-SD PC01Range Pipe 2”– 8”HDG 355 & SS 316L

U-Bolt Grip(Vibro-damping)Type: OPS-SD PC05Range Pipe 1/2”– 8”HDG 355 & SS 316L

U-Bolt Non-Grip(Vibro-damping)Type: OPS-SD PC06Range Pipe 1/2”– 8”HDG 355 & SS 316L

U-Strap GripType: OPS-SD PC02Range Pipe 2”– 8”HDG 355 & SS 316L

74

Oglaend System have commissioned Aveva to produce our Cable Tray, Ladder and Supports catalogue within their PDMS format. This has been done to ensure that our equipment codes are produced in a way that is fully compatible with PDMS and that Aveva will fully support the software with their existing client base.

Our Supports, Cable Trays and Ladders can be downloaded from our web page.

Intergraph PDS is a comprehensive, intelligent computer-aided design/engineering (CAD/CAE) application.

Production-driven, PDS delivers the best design possible - and does it more efficiently to reduce the total installed cost of the project. It enhances value and minimizes risk while preserving the value of data.

Intergraph PDS provides seamless integration with the design tools and catalogues of Oglaend System.

SmartPlant® 3D is an advanced plant design software and Intergraph Process, Power & Marine’s next-generation, data-centric, rule-driven solution for streamlining engineering design processes while preserving existing data and making it more usable/re-usable.

A fundamental component of Intergraph’s SmartPlant Enterprise, SmartPlant 3D is a complementary, full-suite solution that provides all the capabilities needed to design a plant, and then keep it as-built throughout its life cycle.


SmartPlant® 3D and PDS®

Contact us for SP3D and PDS catalogue.

Simplified support planOnly the welding brackets are installed by the fabricator. Then the installation contractor can fit the equipment without need of repainting.

The brackets combined with channels give fixing points for cable ladders

and small pipes throughout the equipment route.

75

MultiGrid®: ShipsFlexible Support Plan and a Simplified support plan

For full range Please ask for our catalogue; Cable Ladders and Accessories for Ships or download fromwww.oglaend-system.com

Flexible support planOnly the welding channels are fixed in the construction yard by the fabricator. Then the installation contractor can fit the equipment without need of repainting. The channels provide multiple fixing points for cable ladders and small pipes, and also function as stif-

feners for the stringers. The flexibility makes it easy to install and adjust E, I&T and piping, making

this a very cost efficient solution.

Use our low weight versatile Mekano Channels instead of the heavy welded traditional solutions.

76

FOR COLD WORK

Foam included. Type states length in mm

Cast the Concrete Insert Rail into the concrete construction for full Multidiscipline Support.

Additional concrete clamps for all our Mekano Channels and Support Equipment complete the MultiGrid® system.

Concrete Insert Rail as MultiGrid Ceiling on Ormen Lange.

Multidiscipline support system for concrete constructions

Order Code for Concrete Insert Rail:

Please ask for our special folder describingthe use of our Insert Rail

HDG SS Type: Art. no. Art. no. S-M CIC-V-50-1-3000 1303393 1303390 S-M CIC-V-50-1-2500 1303394 1303391 S-M CIC-V-50-1-1250 1303395 1303392 Nail plate: S-M CIC-V-FC 79717C Nail box 500 pcs.:S-M CIC-V-NA 79717H T-bolt M10x30: S-M CIC-V-TS 80911 80910

77

Ceiling Bracket for single or double CH100-1

For wider ladders and trays we recommend U-frames. Choose starters according to the required load capacity.

Fixing brackets for concrete

Page 81

Page 81

Holes:7 x 209 x 30

12.5 x 25

94

c/c 53

Fix with: 1 bolt max Ø 12mm

Fix with: 1 bolt max Ø 12mm

L

L

Cantilever Arm for LOE, RZE ladders and SPB trays.Type states width. Safety factor 2.

HDG SS Max. WeightType L Art. no. Art. no. load (kg) SS (kg)S-M CA-30-100 86275 86270 150 0.35S-M CA-30-150 86276 86271 100 0.42S-M CA-30-200 86277 86272 80 0.48S-M CA-30-300 86278 86273 60 0.67S-M CA-30-400 86279 86274 50 0.81

Cantilever Arm for LOE, RZE ladders and SPB trays.Type states ladder width. Safety factor 2.

L = Type length + 40mm

L = Type length + 29mm

Ceiling Bracket for Concrete Insert Rail.

HDG SS Max. Weight Type L Art. no. Art. no. load (kg) SS (kg)S-M BS-CH50-2 80134 80133 1000 0.5S-M BS-125-CH50-2T (B) 1303397 1303396 1000 0,5

Choose starters according to the required load capacity.

For order details and load capacities see page 12-13.Also study Angle Brackets on page 68.

HDG SS Maks last Weight Type L Art. no. Art. no. Max. load (kg) SS (kg)S-M CA-35-100 1372689 1302442 350 0,4S-M CA-35-200 1372690 1302443 250 0,5S-M CA-35-300 1372691 1302444 200 0,6S-M CA-35-400 1372692 1302445 175 0,8S-M CA-35-500 1372693 1302446 150 0,9S-M CA-35-600 1372694 1302447 125 1,1

Ceiling Bracket (B) for Concrete or steel.

Safety factor 2.

78

Oglaend System’s enhanced FRP system con-sists of a multidicipline heavy duty support sys-tem and a full range of cable trays and cable ladders. All made from Fiber Reinforced Plastic.

Multidiscipline support system in FRP

Ask for our special catalogue!

FRP CABLE LADDERS, TRAYS AND SUPPORT SYSTEM

Being first is good, being smart is better, being both is Simply the Best!

ISO 9001 2008 CERTIFIED

• A light-weight Multidiscipline support system

• Corrosion resistant

• Simple hand tools used for cutting and drilling

• Modifications are easily done on site

The FRP Support Systemis simple, smart and fast, whatever solution you require

Our FRP support system with ladders and trays installed in a highly corrosive environment at the Elkem Solar Silicium production facilities in Norway.

79

Miscellaneous products:

Constructed to support loads from all kinds of cables. Made of synthetic, none conductive material. Available in three different sizes:

Safety hook (Temporary solution)

Type (white) Safe (kg)Approved by DNV Art. no. Length Working Load Weight A-M HT-6 1372893 160mm (6”) 60 A-M HT-9 1372894 230mm (9”) 55 A-M HT-12 1372895 310mm(12”) 190Type (LI=green) Light version is not approved by DNV. For some less load. A-M HT-LI-6 80902 160mm (6”) A-M HT-LI-9 80903 230mm (9”) A-M HT-LI-12 80904 310mm(12”)

The white hook is approved by DNV

Type UNOAsk for special catalogue

RHS U-bolts for UNO: Ordering list in the UNO catalogue

UNO channel fixed to RHS 80 with Square U- bolt type M8-RHS-80.The UNO channels support equipment plate and cable tray.

Cantilever console fixed to RHS with UNO 3-hole brackets and Square U- bolts.

Square U- bolts used to fix weather house bracket.

Square U-bolt for RHS beams ordering list:

A complete range of UNO support channels

and accessories along with best practice

examples.

SSType states dim. Bolt/RHS Art. no.S-M UB-SQ-M8-SHS-50 1372590S-M UB-SQ-M8-SHS-80 1372591S-M UB-SQ-M8-SHS-100 1372592S-M UB-SQ-M10-SHS-120 1372593S-M UB-SQ-M10-SHS-140 1372594M10 supplies from stock.

80

SELF-LOCKING BOLT SETS with pan head and flange nutsSelf-Lock system is supplied in stainless steel.Other bolts & fixing items see below and next page.

Self-Lock System includes Vibration-proof fasteners

Old-fashioned:The nut is moveable during vibrations bacause of sidewards thread gap.

New standard:The nut is locked during vibrations because all

thread contact stops sidewards movement.

Self-Lock, a unique pretension thread locking system.Ask for separate brochure.

SSDescription Type Art. no.M10x25mm locking bolts A4 DIN 603 S-M LS-M10x25 84352M10x30mm locking bolts A4 DIN 603 S-M LS-M10x30 89821M10x35mm locking bolts A4 DIN 603 S-M LS-M10x35 82709M10x50mm locking bolts A4 DIN 603 S-M LS-M10x50 89822M10x70mm locking bolts A4 DIN 603 S-M LS-M10x70 81396M10x1000mm Threaded rod A4-80 DIN 975 S-M TR-M10x1000 87995M10 Self-Lock Nuts A4-80 DIN 6923 S-M NU-FL-M10 1371973

SSDescription Type Art. no.M10x130 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X130 1372950M10x130 HEX Bolt A4 80 DIN 931 S-M HE-M10X130 1372572M10x140 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X140 1372951M10x140 HEX Bolt A4 80 DIN 931 S-M HE-M10X140 1372573M10x150 HEX Bolt-Set A4-80 Self-Lock Nut S-M HE-NU-M10X150 1372952M10x150 HEX Bolt A4 80 DIN 931 S-M HE-M10X150 1372574M10x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M10X1000 1372953M10x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M10X1000 87995M10 Self-Lock Nut A4-80 (L=10mm) DIN 6923 S-M NU-FL-M10 1371973 M12x1000mm Rod-Set A4-80 Self-Lock nut (2) S-M TR-NU-M12X1000 1372954M12x1000mm Threaded Rod A4-80 DIN 975 S-M TR-M12X1000 87996M12 Self-Lock Nut A4-80 (L=12mm) DIN 6923 S-M NU-FL-M12 1371343 M16x50 HEX Bolt-Set A4-80 S-M HE-NU-M16X50 1372970M16x50 HEX Bolt A4 80 DIN 933 S-M HE-M16X50 1372926M16x65 HEX Bolt-Set A4-80 S-M HE-NU-M16X65 1372971M16x65 HEX Bolt A4 80 DIN 933 S-M HE-M16X65 1372927M16x70 HEX Bolt-Set A4-80 S-M HE-NU-M16X70 1372972M16x70 HEX Bolt A4 80 DIN 933 S-M HE-M16X70 1372928M16x80 HEX Bolt-Set A4-80 S-M HE-NU-M16X80 1372973M16x80 HEX Bolt A4 80 DIN 933 S-M HE-M16X80 1372929M16x90 HEX Bolt-Set A4-80 S-M HE-NU-M16X90 1372974M16x90 HEX Bolt A4 80 DIN 933 S-M HE-M16X90 1372930M16 Full Metal Lock Nut A4-80 (L=13mm) DIN 980 S-M NU-FL-M16 1372969

M20x130 HEX Bolt-Set A4-80 S-M HE-NU-M20X130 1372975M20x130 HEX Bolt A4 80 DIN 931 S-M HE-M20X130 1372580M20 Full Metal Lock Nut A4-80 (L=16mm) DIN 980 S-M NU-FL-M20 1372581

Descrition Height Key size Torque STD SS Type (mm) (mm) (Nm) Packs Art. no. DIN 6923 S-M NU-FL-M6 5,8 10 8-10 200 1371971DIN 6923 S-M NU-FL-M8 7,9 13 20-23 200 1371972DIN 6923 S-M NU-FL-M10 9,6 15 40-45 200 1371973DIN 6923 S-M NU-FL-M12 11,8 18 80-85 200 1371343

Descrition Height Key size Torque STD SS Type (mm) (mm) (Nm) Packs Art. no. DIN 934 S-M NU-M6 4,8 10 6-7 200 1372781DIN 934 S-M NU-M8 6,4 13 15-17 200 1371340DIN 934 S-M NU-M10 7,9 17 30-33 200 1371341DIN 934 S-M NU-M12 10 19 60-62 200 1371342

Bolt details for Mekano 60-2 system (Channel S-M CH60-2)

Standard Nut details (A4-80)

Self-Lock Nut details (A4-80)

Bolt details for Mekano 100-4 system (Channel S-M CH100-4)Various use:Dimensions M10 is for splice connections e.g.: Type: S-M SC-L-CH100-4Use: 8 x M10x130mm

Other dimensions is for various items e.g.: Type: BC-MS-CH100-4Use: 6 x M16x65mm

For Bracing ConnectionType: S-M SC-V-CH100-4-Aand S-M SC-V-CH100-4-BUse: 4 x M10x130mm for spliceand 1 x M20x130mm for hinge function

81

82

Perforated ChannelsFor other support of trays, ladders and electrical installations. Available in 3m lengths.

PR = PrimedHDG = Hot Dip Galvan AISI 316 (L)ALU = Aluminium

Flat IronCrosswise perforated PR HDG SS ALU WeightType Art. no. Art. no. Art. no. Art. no. HDG (kg)Fl-CW-7x20-30x5x3000 1372104 1372130 2,6Fl-CW-7x20-40x5x3000 1372105 1372131 3,8Fl-CW-7x20-50x4x3000 1372101 1372103 4,0Lengthwise perforated SS (kg)Fl-LW-7x35-25x5x3000 1372107 1372111 1371930 2,4Fl-LW-7x35-30x5x3000 1372108 1372112 1371931 78173 3,0Fl-LW-7x35-40x5x3000 1372109 1372113 1371932 78229 4,2Fl-LW-7x35-50x5x3000 1372110 1372114 1371933 5,5Fl-LW-11x35-40x5x3000 81477 81484 86858 3,9Fl-LW-11x30-50x5x3000 81485 1371935 5,4Fl-LW-11x30-40x6x3000 1371984 5,0Fl-LW-11x30-40x8x3000 1372100 1372102 6,6

Angle IronCrosswise perforated PR HDG SS ALU WeightType Art. no. Art. no. Art. no. Art. no. HDG (kg)AI-CW-7x16-30x30x3x3000 1372132 1372134 1371942 78228 3,9AI-CW-7x16-40x40x4x3000 1372133 1372140 1371943 6,9Lengthwise perforatedAI-LW-7x30-30x30x3x3000 1372115 1372117 1371939 3,9AI-LW-7x30-40x40x4x3000 1372116 1372118 1371940 6,9AI-LW-7x30-50x50x3x2000 78045 1,5*AI-LW-11x30-50x50x5x3000 1372119 1372120 1371941 10,7Double lengthwise perforatedAI-LW-7x30-40x40x4x3000 1371945 6,6AI-LW-11x30-50x50x5x3000 78662 1371946 10,1AI-LW-11x35-49x49x4x3000 88349 88348 7,4AI-LW-7x35-49x49x4x3000 88347 88342 7,9 AI-LW-7x35/11x35-49x49x4x3000** 88346 88344 7,7 AI-LW-13x40-54x54x4x3000 88351 7,8Predefined lengths up to 1,5m are supplied on request. *) Weight in ALU

Welding Channel for tubing clampsFor quick and easy tubing installation with ETIN tubing clamp. Available in 3m lengths. PG HDG SS ALU WeightType Art. no. Art. no. Art. no. Art. no. SS (kg/m)RZ- WB 78463 78497 1

50

15

25

7

36,5

28,525

35

3515

15

5

50

3515

11 mm

30

7 mm

15

30

11 mm

30

30

7 mm

15

7

16 mm

107

7

20 mm

10 7

30

11 mm

30

30

11 mm

30

35

7 mm

15

35

11 mm

15

��

��

��

��

��

��

��

��

��

3515

11 mm

30

7 mm

15

30

11 mm

30

30

7 mm

15

7

16 mm

107

7

20 mm

10 7

30

11 mm

30

30

11 mm

30

35

7 mm

15

35

11 mm

15

LOCATIONS

HOLDING COMPANYØglænd Industrier AS P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 www.oglaend-system.com

SUBSIDIARYNorway Øglænd System ASP.O. Box 133NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 Fax sales office: + 47 51 78 81 61 Email: [email protected] www.oglaend-system.com

DenmarkØglænd System ASTel.: +45 86 88 66 66Fax: +45 86 88 66 67Email: [email protected]

Dubai (Middle East)Oglaend Industries Middle East Tel.: + 971 4 887 8134Fax: + 971 4 887 8143Mobile: + 971 50 55 86 183Email: [email protected]

MalaysiaOglaend Industries SDN BHDTel.: + 60 3 51 922 049Fax: + 60 3 51 922 039Mobile: + 60 1 26 85 57 65Email: [email protected]@oglaendind.com

The Netherlands Oglaend System BV Tel.: + 31 1804 14 204 Fax: + 31 1804 19 395 Email: [email protected]

Russia (St. Petersburg)Oglaend System RussiaTel.: +7(812) 313 1580Fax: +7(812) 313 1580Email: [email protected]

Singapore (South East Asia)Oglaend System Singapore Pte. Ltd.Tel.: + 65 67 48 82 78Fax: + 65 67 48 86 15 Email: [email protected]

SwedenÖgländ System ABTel.: + 46 40 45 74 60 Fax: + 46 40 45 67 25 Email: [email protected]

UKOglaend System UK Ltd.Tel.: + 44 121 552 9662Fax: + 44 121 544 6627Email: [email protected]

USAOglaend System USA Tel.: +1 832 288 4452Email: [email protected]

KoreaOglaend System Korea Co LtdTel.: + 82 518 320 761Fax: + 82 518 320 762Email: [email protected]

SALES OFFICESNorwayØglænd System AS, Division Oslo:Tel.:+ 47 22 25 15 10 Fax: + 47 22 25 25 21

Øglænd System AS, Division Ålesund:Tel.: + 47 70 19 09 50 Fax: + 47 70 19 09 51

Øglænd System AS, Division Trondheim:Tel.: + 47 73 80 99 70Fax: + 47 73 80 99 77

AGENTS - DlSTRlBUTORSAbu DhabiProserv Albadie LLCTel.: + 971 26 27 73 70Fax: + 971 29 27 79 72Email: [email protected]

AustraliaJ. T. Day Pty. Ltd.Tel.: + 61 8 9303 2248Fax: + 61 8 9303 2446Email: [email protected]

BrazilM.O.TECH do BrazilTel.: + 55 21 2532 2101Fax: + 55 21 2517 2437Email: [email protected]

Brunei Shinba Integrated Engineering ServicesTel.: + 673 333-1489Fax: + 675 333-6333Email: [email protected]

Canada Source Energy AtlanticTel.: + 1 (709) 739-8003Fax: + 1 (709) 739-5973Email: [email protected]

NOSO Ltd.Tel.: + 1 709 782 2645 Fax: + 1 709 782 0534 Email: [email protected] www.noso.ca

FinlandElmarino - Shipping OYTel.: +358 22 54 61 00Fax: +358 22 54 62 76

IcelandSmith & NorlandTel.: + 354 52 03 000Fax: + 354 52 03 011Email: [email protected]

lndonesiaPT. Multi Tarex MuIia Tel.: + 62 21 3983 5337Fax: + 62 21 3983 5340Email: [email protected] www.multitarex.com

ItalyPiemme Broker S.R.L.Tel.:+39 02 906 33621Fax +39 02 906 32036Email: [email protected]

MalaysiaOffshore Industries Sdn BhdTel.: + 60 3-9284 0613Fax: + 60 3-9284 1051Email: [email protected]

MexicoEsteban De Leon AlbaiteroTel.: + 52 (55) 2690 5963E-mail: [email protected]

MBP International Trade Inc. Tel.: + 52 155 40169985 E-mail : [email protected]

ThailandProbity International Co Ltd.Tel.: + 66 2 710 6146 Ext. 107Fax: + 66 2 710 6147Email: [email protected]

The Baltic StatesBastini OÜTel.: + 372 660 5811 Fax: + 372 660 5812Email: [email protected]

USASource IECTel.: + 1 281 88 28 300Fax: + 1 281 88 28 305E-mail: [email protected]

VietnamMT Corp.Tel.: + 848 821 0373Fax: + 848 821 0358Email: [email protected] - Agent

NigeriaZYCUS West Africa Ltd. Engineering & Procurement Solutions Tel. + 234 803 704 6242 E-mail [email protected] www.zwal.com.ng

ChinaOglaend Industries (Suzhou) Co., LtdTel.: + 86 512 62625453Fax.:+ 86 512 62805553

*

••

•

•

•

•••

•

•

X

*•

X

HEAD OFFICE AND FACTORY

SUBSIDIARIES

AGENTS – DISTRIBUTORS

SALES OFFICES

FABRICATION FACILITIES

X

84

Konsern/Holding company: Øglænd Industrier AS

Datterselskap/Subsidiary: Øglænd System ASHovedkontor fabrikk/Head Office factory: P.O. box 133, N-4358 Kleppe, Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60 Fax sales office: +47 51 78 81 61

SIMPLY THE BEST! This has been our motto since the company was founded in 1977. By living up

to the motto we have become the market leader in our field – worldwide.

Oglaend System´s goal is to develop systems that are better, simpler and more

economic overall.

www.oglaend-system.com Email: [email protected] 01.15

Details may be subject to change without prior notice.

Documents

MULTIDISCIPLINE SUPPORT SYSTEM Type MultiGrid® · Discipline guide. 5 ... Modeling using MultiGrid in our PDMS or SP3D catalogues in the detailed design stage can generate ... Whatever