Multifamily Building Operator Job/Task Analysis and Report:
September 2013Multifamily Building Operator Job/Task Analysis and
Report September 2013 Corina M. Owens, Ph.D. Professional Testing
Inc. Orlando, Florida
NREL Technical Monitor: Christina Larney
NREL is a national laboratory of the U.S. Department of Energy
Office of Energy Efficiency & Renewable Energy Operated by the
Alliance for Sustainable Energy, LLC This report is available at no
cost from the National Renewable Energy Laboratory (NREL) at
www.nrel.gov/publications.
Subcontract Report NREL/SR-7A40-60536 September 2013
Contract No. DE-AC36-08GO28308
Multifamily Building Operator Job/Task Analysis and Report
September 2013 Corina M. Owens, Ph.D. Professional Testing Inc.
Orlando, Florida
NREL Technical Monitor: Christina Larney Prepared under Subcontract
No. AXL-3-23317-01
NREL is a national laboratory of the U.S. Department of Energy
Office of Energy Efficiency & Renewable Energy Operated by the
Alliance for Sustainable Energy, LLC This report is available at no
cost from the National Renewable Energy Laboratory (NREL) at
www.nrel.gov/publications.
Subcontract Report NREL/SR-7A40-60536 September 2013
Contract No. DE-AC36-08GO28308
NOTICE
This report was prepared as an account of work sponsored by an
agency of the United States government. Neither the United States
government nor any agency thereof, nor any of their employees,
makes any warranty, express or implied, or assumes any legal
liability or responsibility for the accuracy, completeness, or
usefulness of any information, apparatus, product, or process
disclosed, or represents that its use would not infringe privately
owned rights. Reference herein to any specific commercial product,
process, or service by trade name, trademark, manufacturer, or
otherwise does not necessarily constitute or imply its endorsement,
recommendation, or favoring by the United States government or any
agency thereof. The views and opinions of authors expressed herein
do not necessarily state or reflect those of the United States
government or any agency thereof.
This report is available at no cost from the National Renewable
Energy Laboratory (NREL) at www.nrel.gov/publications.
Available electronically at http://www.osti.gov/bridge
Available for a processing fee to U.S. Department of Energy and its
contractors, in paper, from:
U.S. Department of Energy Office of Scientific and Technical
Information P.O. Box 62 Oak Ridge, TN 37831-0062 phone:
865.576.8401 fax: 865.576.5728 email:
mailto:
[email protected]
Available for sale to the public, in paper, from:
U.S. Department of Commerce National Technical Information Service
5285 Port Royal Road Springfield, VA 22161 phone: 800.553.6847 fax:
703.605.6900 email:
[email protected] online ordering:
http://www.ntis.gov/help/ordermethods.aspx
Cover Photos: (left to right) photo by Pat Corkery, NREL 16416,
photo from SunEdison, NREL 17423, photo by Pat Corkery, NREL 16560,
photo by Dennis Schroeder, NREL 17613, photo by Dean Armstrong,
NREL 17436, photo by Pat Corkery, NREL 17721.
Printed on paper containing at least 50% wastepaper, including 10%
post consumer waste.
The development of job/task analyses (JTAs) is one of three
components of the Guidelines project, and it will allow industry to
leverage these components to develop training resources, quality
assurance protocols, accredited training programs, and professional
certifications. The development of these foundational materials for
the WAP, and for the home performance industry, will facilitate a
growing, skilled home energy upgrade workforce that is able to meet
the increasing demand for energy upgrade work while maintaining
quality assurance for homeowners and employers.
NREL secured the services of Professional Testing, Inc. to develop
JTAs and specifically to identify and catalog all of the tasks
performed by individuals in each of the multifamily specific job
categories listed below, as well as the knowledge, skills, and
abilities (KSAs) needed to perform the identified tasks.
• Multifamily Energy Auditor
• Multifamily Building Operator
• Multifamily Retrofit Project Manager
• Multifamily Quality Control Inspector
This report describes the JTA development process, provides a
summary of the JTA validation study and an analysis of the study
data, and contains a content outline and “developing a curriculum”
(DACUM) chart for multifamily building operators.
This report is available at no cost from the iiiNational Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Process for Selecting Subject Matter Expert
..........................................................................................
1
Methods........................................................................................................................................................
3
Overview of Job Analysis Process
.........................................................................................................
3 Job/Tasks Analysis Workshop
...............................................................................................................
3
JTA Workshop Attendees
.............................................................................................................
5 Job/Task Analysis Validation Study
......................................................................................................
5
Development of Demographic Questions for the Online Validation
Study.................................. 6 Development of
Task-Rating Scales for the Online Validation
Study.......................................... 6 Administration of
the Online Validation
Study.............................................................................
7
Results
.........................................................................................................................................................
9 Online Validation
Study.........................................................................................................................
9
Study Respondent Demographics
.................................................................................................
9 Overview of Study Respondents Ratings for Task Statements
................................................... 17 Reliability
of Tasks Ratings
........................................................................................................
19
Results of Post-Validation Review Meeting
........................................................................................
19 Review of Study Respondent Demographics
..............................................................................
20 Review of Low-Rated Tasks
.......................................................................................................
20 Review of Missing Tasks and Additional Comments
.................................................................
22 Final Weighting of Task List and Proposed Content Outline
..................................................... 24
References.................................................................................................................................................
28 Appendix A. Opportunity Announcement
..............................................................................................
29 Appendix B. Job/Task Analysis for a Multifamily Building
Operator ..................................................
30
Multifamily Building Operator Job Description
..................................................................................
30 Introduction
..........................................................................................................................................
30 Subject Matter Expert Selection
Process..............................................................................................
31 Job/Task Analysis Workshop
...............................................................................................................
31 Results
..................................................................................................................................................
32 References
............................................................................................................................................
32 Nomenclature
.......................................................................................................................................
32 Proposed Content
Outline.....................................................................................................................
33
Knowledge............................................................................................................................................
35 Skills, Abilities, and Attributes
............................................................................................................
37 Physical
Conditions..............................................................................................................................
39 Tools, Equipment, and Resources
........................................................................................................
40 DACUM Chart
.....................................................................................................................................
43
Appendix D. Validation
Study..................................................................................................................
60
This report is available at no cost from the iv National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
List of Tables Table 1. Rating Scales
............................................................................................................................
7 Table 2. States in which Respondents Reported Working
...................................................................
10 Table 3. Professional Societies and Organizations to which
Respondents Belonged .......................... 14 Table 4.
Multifamily Building Credentials of
Respondents.................................................................
15 Table 5. Means and Standard Errors of Frequency and Importance
Task Ratings .............................. 18 Table 6. Combined
Means and Frequencies of Duties and
Tasks........................................................ 21
Table 7. Tasks Identified by Study Respondents as Missing from the
JTA Task Lista........................ 23 Table 8. Additional
Comments Identified by Study Respondentsa
...................................................... 23 Table 9.
Comparison of Validation Study Results with JTA SME Panelists
Weights......................... 24 Table 10. Final Content Outline
for Multifamily Building
Operators.................................................. 26
Table B-1. List of Acronyms and Abbreviations
.................................................................................
33 Table B-2. Proposed Content Outline for Multifamily Building
Operators......................................... 33 Table B-3.
Specialized Knowledge Required of Multifamily Building Operators
.............................. 35 Table B-4. General Knowledge
Required of Multifamily Building Operators
.................................... 36 Table B-5. Skills,
Abilities, and Attributes Required of Multifamily Building
Operators................... 38 Table B-6. Physical Conditions
Recommended for Multifamily Building Operators
......................... 39 Table B-7. Tools, Equipment, and
Resources Used by Multifamily Building Operators
.................... 41 Table B-8. DACUM Chart for Multifamily
Building
Operators..........................................................
44
This report is available at no cost from the National Renewable
Energy Laboratory (NREL) v at www.nrel.gov/publications.
Introduction Job/task analysis (JTA) is a procedure for analyzing
the tasks performed by individuals in an occupation, as well as the
knowledge, skills, and abilities (KSAs) necessary to perform those
tasks. Specifically, a JTA can be defined as “any systematic
procedure for collecting and analyzing job-related information to
meet a particular purpose” (Raymond 2001, p. 372).
The use of JTAs (also known as job analysis, task analysis,
practice analysis or role delineation) to define the content domain
is a critical component in establishing the content validity of a
training or examination program. Content validity refers to the
extent to which the domain outline of the training or examination
program overlaps with the important components (i.e., KSAs) of a
job.
A well-defined JTA includes participation by a representative group
of subject matter experts (SMEs) who reflect as much diversity as
possible within the job. Diversity refers to regional or job
context factors and to SME factors, such as years of experience,
education, and industry perspective. JTAs are a valuable resource
for multiple development and evaluation purposes including, but not
limited to, job descriptions, job classifications, job evaluations,
performance appraisals, trainings, worker mobility, workforce
planning, efficiency, safety, and legal and quasi-legal
requirements (Brannick et al. 2007). Job analyses are traditionally
used by secondary and post-secondary educators, business or
industry trainers, government or military trainers, and test
developers. Although there are multiple methods for conducting
JTAs, this project used the “developing a curriculum” (DACUM)
method.
DACUM is an occupational analysis led by a trained facilitator, in
which practitioners and SMEs in a specific occupation come together
for a multiday workshop to provide input about the specific tasks,
knowledge, and skills needed to perform their job. Modified
small-group brainstorming techniques are used to obtain the
collective expertise and consensus of the group. DACUM has proven
to be a very effective method of quickly determining, at relatively
low cost, the competencies or tasks that must be performed by
persons employed in a given job or occupational area.
The DACUM chart that results from the DACUM analysis is a detailed
portrayal of the skills and competencies involved in the occupation
being studied. The DACUM analysis can be used as a basis for
various aspects of education, training, and certification programs,
including curriculum development, student learning, training needs
assessments, worker performance evaluations, and competency test
development.
Process for Selecting Subject Matter Expert Professional Testing,
Inc. helped establish the criteria for selecting the panel of SMEs
and practitioners. Active practitioners and SMEs interested in
participating in the study were invited to submit their credentials
through a publically announced online submission process. To be
eligible for participation in the JTA workshop, applicants had to
be current, active practitioners and available to attend the entire
workshop session in person.
A total of 136 applications were received for participation in the
multifamily JTA workshops and of these, 126 were qualified as
current practitioners in the multifamily energy upgrade
industry.
This report is available at no cost from the 1National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
To create a representative panel of participants, Professional
Testing, Inc. used specific ranking criteria, including:
• Geographic (including regional/climatic) diversity
• Representation of a wide range of experience levels (novice to
expert)
• No single organization or organization size dominated the
group
• All sectors were represented with no single sector dominating
(public versus private)
• Diversity of industry-related credentials, represented by the
panelists.
Twelve applicants meeting the above criteria were selected to
create the multifamily building operator SME panel.
A copy of the opportunity announcement that solicited applications
for the multifamily JTA workshops is included in Appendix A.
This report is available at no cost from the 2National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Methods Overview of Job Analysis Process A job analysis or practice
analysis is a foundational requirement of any valid credentialing
program; it helps define the core knowledge areas, critical work
functions, and skills that are common across a representative
sampling of current practitioners or incumbent workers. Empirical
results from the job analysis provide examinees and the public the
basis of a valid, reliable, fair and realistic assessment that
reflects the KSAs required for competent job performance. For
existing credentials, a job analysis should be performed
periodically to maintain the validity of the content on the
exam.
Professional Testing, Inc. conducted a JTA workshop with a group of
twelve SMEs to identify the duties, tasks, steps and essential
knowledge, skills, and attributes associated with the job performed
by a multifamily building operator.
Following the JTA workshop, Professional Testing, Inc. developed an
online study to validate the initial results of the study and
finalize a content outline. The online study was started by 57
participants and completed by 39 multifamily building operators
across the United States.
Job/Tasks Analysis Workshop The multifamily building operator JTA
workshop was held in Lakewood, Colorado, May 9–11, 2013.
The first day of the workshop consisted of an introduction to the
DACUM process. A trained DACUM facilitator explained the JTA
process and provided the SME panel with duty and task statement
definitions. A duty reflects a large area of work for a specific
profession; multiple tasks describe how to perform each duty. The
introduction was followed by a discussion about multifamily
building operators, more specifically the “who, how, what, and why”
of the profession. The SME panelists compiled this information into
a comprehensive list to capture key multifamily building operator
job components.
The next step was to identify duty (or domain) areas. The SME
panelists identified duty areas, and facilitators wrote the duty
areas on large index cards and placed the duty areas on a wall for
the whole group to see. Once panelists reached consensus on the
duty areas, they delineated each duty by identifying the required
tasks. After all the tasks were identified, they were ordered
sequentially and entered onto a spreadsheet.
On the second day of the workshop, the facilitators projected a
spreadsheet that contained the identified duty areas and
corresponding task
The DACUM Philosophy
• Practitioners can describe and define their jobs more accurately
than anyone else.
• One of the most effective ways to define a job is to describe the
tasks that practitioners perform.
• All jobs can be effectively and sufficiently described in the
terms of the tasks that successful workers perform.
• All tasks, to be performed correctly, demand certain
This report is available at no cost from the 3National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
statements. The facilitators asked the SMEs, while looking at the
projected task list, to list the steps that occur under each task
and to identify the KSAs, tools, equipment, and resources required
to perform each task. This component of the job analysis process
occupied the majority of time on the second day.
On the last day of the workshop, the SMEs finalized the remaining
task statements. And, the SMEs were asked to report how much of
their time they spent on each of the duty and task areas. The SMEs
rated each duty and task on the two-dimensional scale shown in
Figure 1.
Figure 1. Two-dimensional scale for rating duties and tasks
The SMEs were asked to consider each task in terms of frequency and
importance. For frequency, they considered whether they did the
task more or less often and for importance they considered whether
the task was more or less important to perform successfully as a
minimally competent multifamily building operator. The SMEs were
asked to select a number from zero to two based on the two
dimensions of frequency and importance. The mean frequency and
importance ratings were calculated for all of the SME panelists and
a preliminary content outline was developed at the end of the 3-day
workshop.
As a final activity, the SMEs reviewed and finalized the following
overarching job description for multifamily building
operators.
A multifamily building operator efficiently operates and maintains
building systems, addresses tenant concerns, improves building
performance, and complies with regulations to support a
comfortable, healthy, and safe living environment.
The job profile that results from the JTA workshop is a detailed
and graphical portrayal of a multifamily building operator and was
initially documented in the form of a draft job and task analyses
report. The draft JTA report appears in Appendix B.
This report is available at no cost from the 4National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
JTA Workshop Attendees SME Panelists
Clifford E. Babson CEM, CMVP, CEA, LEED AP Principal Four Points
Energy Solutions Lansing, NY
Renardon Calhoun Single/Multifamily Energy Auditor KB Energy, Inc.
South Holland, IL
Howard Feldman Principal Coastal Green Building Solutions Hilton
Head, SC
Matthew Holden, P.E. President Sparhawk Group Yarmouth, ME
Thomas Holmes Director, Energy Performance Group Remediation
Specialists, Inc. Hamilton, NJ
Luke Ilderton Director of Energy Efficiency Programs Energy
Outreach Colorado Denver, CO
Meeting Facilitation Professional Testing, Inc.
Andrew Kinaci Senior Energy Analyst CNT Energy Chicago, IL
Rick Meinking Business Program Manager Efficiency Maine Trust
Augusta, ME
F.L. Andrew Padian Vice President for Energy Initiatives The
Community Preservation Corporation New York City, NY
Asit Patel President ANP Energy Consulting Services Corp. Bellmore,
NY
Andy Wildenberg President e3 Power Denver, CO
Chris Wolken Principal Peninsula Group Menlo Park, CA
Corina Owens, Ph.D. Merrianne Bryan
Job/Task Analysis Validation Study Validation of the JTA workshop
outcome is perhaps the single most important component of the JTA
development process. It provides an opportunity for other industry
experts to verify the accuracy of the job profile as defined by the
representative sample of practitioners (SME panelists).
This report is available at no cost from the 5National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Once the JTA document formulated at the workshop had been reviewed
by NREL, the online study validation was launched to collect
feedback on the frequency and importance ratings of the job tasks
identified by the JTA workshop panelists and to capture any
additional tasks and comments believed by respondents to pertain to
the job of a multifamily building operator.
A copy of the validation study announcement is included in Appendix
C.
Development of Demographic Questions for the Online Validation
Study The first step in developing the online validation study was
to identify key demographic questions to capture the
representativeness of respondents and help evaluate the validity of
responses. Each participant was asked ten demographic
questions:
1. What is the size of your organization?
2. In which state do you work?
3. In which sector do you currently work?
4. Which of the following jobs have you held in the multifamily
(MF) building sector?
5. Which of the following categories best describes your current
position?
6. How many years of experience have you had working as a
multifamily building operator (total combined years)?
7. How many years of total experience do you have in the
multifamily building industry (all jobs)?
8. What is your highest completed level of education?
9. To what professional societies/organizations do you
belong?
10. What building performance credentials do you currently
hold?
Development of Task-Rating Scales for the Online Validation Study
The second step in developing the online validation study was to
identify the rating scales that survey participants use to rate the
tasks performed by a multifamily building operator. There are
multiple models of rating scales used in job analyses; however, for
the purposes of this study, two study scales were used: task
frequency and importance.
Task frequency was chosen because tasks performed more often should
receive more emphasis, as reported by Newman, Slaughter, and
Taranath (1999). Task importance was chosen because it is the most
common scale used to evaluate tasks for licensure or certification
job analysis (Newman et al. 1999); moreover, as illustrated in the
Standards for Educational and Psychological Testing (American
Educational Research Association 1999), “the content domain to be
covered by a credentialing test should be defined clearly and
justified in terms of the importance of the content for
credential-worthy performance in an occupation or profession”
(AERA, APA, NCME, 1999, p. 161). The two rating scales used in the
online validation study are illustrated in Table 1.
This report is available at no cost from the 6National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Table 1. Rating Scales
Frequency—How frequently is this task performed?
Importance—How important is this task to the performance of the
job?
1: Never 1: Not important
2: Perform occasionally 2: Somewhat important
3: Perform fairly often 3: Important
4: Perform very often 4: Very important
An overall rating scale was calculated using the following
formula:
Overall rating scale = 2*Importance + Frequency
The overall rating scale was used to develop weights for the duties
and tasks within the content outline.
Administration of the Online Validation Study Study participants
received an email invitation (with a URL link to the study) from
NREL that (1) invited them to participate in a nationwide research
study investigating the practices, characteristics, and activities
of four multifamily building job categories and (2) encouraged them
to take this opportunity to directly contribute to the development
of the workforce for multifamily home energy upgrades.
The initial email invitation was sent June 19, 2013 to
approximately 3,290 multifamily SMEs either directly from NREL,
through the Guidelines e-newsletter mailing list, or through a
Building Performance Institute, Inc. (BPI) mailing list. The
announcement was also posted to DOE’s Weatherization and
Intergovernmental Program news website1 (which received 25 page
views during the validation study) and the Home Energy Pros Forum
on July 1, 2013 (which received 235 page views on the Home Energy
Pros Blog & Forum during the validation study).
Reminder notices were staggered and sent the weeks of July 8, 2013
and July 15, 2013, announcing the closing date of July 19, 2013.
Approximately 1,450 reminder emails were sent directly to the
multifamily SMEs. In addition, Economic Opportunities Studies, Inc.
(EOS) posted the announcement on its Facebook page, and it received
194 “likes” and an announcement was made during a DOE/EOS webinar
on July 12, 2013 that was attended by 150 individuals.
NREL also made approximately 150 phone calls to the multifamily JTA
workshop participants, applicants, and SME list members,
encouraging people to participate and to inform other multifamily
professionals. These calls were made on Thursday, July 11, 2013 and
Friday, July 12, 2013 and on Monday, July 15, 2013 and Tuesday,
July 16, 2013.
1 http://www1.eere.energy.gov/wip/news.html
Notices announcing an extension of the validation study were sent
on July 22, 2013 and July 23, 2013. These 6,363 emails were sent
directly to SMEs, and several partnering organizations were asked
to forward the extension notice; only SPEER (30), BPI (1,964), and
EOS (4,300) confirmed they had forwarded the notice (their
estimated numbers are included in the total above).
In addition to NREL’s outreach, the Association for Energy
Affordability, Inc. (AEA) made approximately 10 phone calls
specifically to building operators asking for their participation;
AEA’s direct links to those working in the multifamily industry
drove up the number of participants in the extended week of the
study, enabling the minimum participation mark of 40 to be attained
in the job designations of building operator, retrofit project
manager, and quality control inspector.
In total, approximately 8,667 emails were sent to multifamily SMEs
and to industry association members and mailing list affiliated
with the multifamily retrofit industry over the course of the
validation study. In addition, 604 contacts were made via page
views, Facebook “likes,” and the DOE/EOS webinar announcement.
There is potential for significant overlap in these lists, and the
multifamily SME contacts that NREL used are likely to be on at
least one or two of the other lists and possibly more.
All of the study participants had access to internet-capable
computers via their homes, places of employment, or public
libraries. Any computer with a Web browser and a Web connection
could be used to access the study.
The online validation study for multifamily building operators
consisted of 33 job tasks separated into 6 content domains (or duty
areas). A copy of the online study is included in Appendix D.
This report is available at no cost from the 8National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Results Online Validation Study Study Respondent Demographics The
validation study respondents make up the study sample. The
background and demographic portions of the online validation study
help determine how representative the study sample is of the
population of interest. The multifamily building operator study
sample consisted of 57 respondents, with 39 completing the
survey.
Fifty-seven participants answered the question about the size of
their organizations. Of the 57 participants, 67% worked at
organizations with less than 50 people while 23% worked at
organizations having 51–500 people, and 10% worked at organizations
with more than 500 people. Figure 2 visually displays these
results.
39%
28%
23%
10%
1-10 people
11-50 people
51-500 people
Figure 2. Sizes of organizations of respondents
The 57 study respondents represented 10 states, with 4 respondents
indicating they worked in multiple states. Despite a lower than
desired number of states being represented, it was determined these
states resulted in an adequate representation for the industry as 5
of the 8 U.S. mainland climate regions were represented by
respondents. Table 2 shows the geographic distribution of study
respondents.
This report is available at no cost from the 9National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
States Number of Respondents
Multiple States 4
Grand Total 57
Next, study respondents were asked to report the sector in which
they worked at the time of the survey. Most respondents (77%)
reported they worked in the private sector. Figure 3 shows the
results of this question.
In which sector do you currently work?
77%
Figure 3. Sectors in which respondents were working
Study respondents were then asked what jobs they had held in the
multifamily building sector. Most respondents (61%) indicated they
had worked as building operators in the multifamily building
sector. The distribution of different jobs is displayed in Figure
4. (Note that respondents could select multiple jobs, so the total
percentage exceeds 100%).
This report is available at no cost from the 10National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
32%
MF Quality Control Inspector
Figure 4. Jobs held by respondents in the multifamily building
sector
When respondents were asked to categorize their current positions,
most (47%) selected “MF Building Operator Practitioner.” The
distribution of job categories is displayed in Figure 5.
Which of the following categories best describes your current
position?
MF Building Operator Curriculum Developer
MF Building Operator Practitioner
MF Building Operator Trainer/Proctor
Figure 5. Categories of current jobs held by respondents
The study results suggest a wide range of experience from the
participants working as multifamily building operators. While the
largest percentage of study respondents (52%) reported working 10
years or fewer as multifamily building operators there was
considerable experience represented with 23% of respondents stating
that they had over 20 years of experience as multifamily building
operators. Figure 6 displays these results.
This report is available at no cost from the 11National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
combined)?
None
16%
23%
Figure 6. Years of experience respondents had as multifamily
building operators
The largest number of respondents (32%) indicated they had more
than 20 years of total experience in the multifamily building
industry (all jobs). However, study respondents were well
represented across all levels of experience in the multifamily
building industry as a whole. Figure 7 displays these
results.
This report is available at no cost from the 12National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
3% 5%
Figure 7. Years of experience respondents had in industry
Next, study respondents were asked to report their highest levels
of completed education. The largest percentage of study respondents
(35%) indicated a bachelor’s degree was their highest level of
education; this category was closely followed by the “some college”
category (27%). Figure 8 displays these results.
What is your highest completed level of education?
5%
21%
27%
35%
12%
Figure 8. Highest levels of education completed by
respondents
Study respondents were asked to report the professional societies
and organizations they belonged to, and they were allowed to select
more than one. The largest number of respondents (15) indicated
they belonged to the U.S. Green Building Council while 11
respondents indicated they belonged to the Association of Energy
Engineers, as illustrated by Table 3.
This report is available at no cost from the 13National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Society or Organization Number of Respondents
None 21
American Institute of Architects (AIA) 0
American Society of Civil Engineers (ASCE) 0
American Society of Mechanical Engineers (ASME) 1
American Society of Heating, Refrigerating and Air-Conditioning
Engineers (ASHRAE) 7
APPA 0
Association for Facilities Engineering 0
Association of Energy Engineers (AEE) 11
Building Commissioning Association (BCA) 1
Building Owners and Managers Association (BOMA) 2
Construction Specifications Institute (CSI) 1
International Association of Plumbing and Mechanical Officials
(IAPMO) 0
International Building Performance Simulation Association (IBPSA)
1
International Code Council (ICC) 1
International Facility Management Association (IFMA) 0
International Union of Operating Engineers (IUOE) 0
Institute of Electrical and Electronics Engineers (IEEE) 0
Laborers’ International Union of North America (LIUNA) 0
National Fire Protection Association (NFPA) 2
National Institute of Building Sciences (NIBS) 0
Service Employees International Union 5
Sheet Metal Workers’ International Association (SMWIA) 0
United Association of Journeymen and Apprentices of the Plumbing
and Pipe Fitting Industry of the United States and Canada (UA)
1
United Brotherhood of Carpenters 0
United Steelworkers (USW) 0
Other Professional Organizations 13
Study respondents were also asked about their current building
credentials. The largest number of respondents (29) indicated they
held the BPI Building Analyst credential, and 28 candidates
indicated they held the BPI Multifamily Professional credential.
Table 4 provides the complete list of credentials and number of
respondents who held each.
This report is available at no cost from the 14National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Credential Number of Respondents
American Society of Heating, Refrigerating and Air- Conditioning
Engineers Building Energy Modeling Professional (BEMP) 0
American Society of Heating, Refrigerating and Air- Conditioning
Engineers Commissioning Process Management Professional (CPMP)
0
American Society of Heating, Refrigerating and Air- Conditioning
Engineers Operations and Performance Management Professional (OPMP)
1
Association for Facilities Engineering Certified Plant Engineer
(CPE) 0
Association for Facilities Engineering Certified Plant Maintenance
Manager (CPMM) 0
Association for Facilities Engineering Certified Plant Supervisor
0
Association of Energy Engineers Certified Building Energy
Simulation Analyst (BESA) 1
Association of Energy Engineers Certified Building Commissioning
Professional (CBCP) 0
Association of Energy Engineers Certified Energy Auditor (CEA)
2
Association of Energy Engineers Certified Energy Manager (CEM)
5
Association of Energy Engineers Existing Building Commissioning
Professional (EBCP) 1
Association of Energy Engineers Energy Manager in Training (EMIT)
0
Association of Energy Engineers/Efficiency Valuation Organization
Certified Measurement and Verification Professional 1
BOMI International Facilities Management Administrator (FMA)
0
BOMI International Real Property Administrator (RPA) 0
BOMI International Systems Maintenance Administrator (SMA) 0
BOMI International Systems Maintenance Technician (SMT) 0
Building Commissioning Association Certified Commissioning
Professional (CCP) 0
BPI Energy Auditor 9
BPI Retrofit Installer 2
BPI Crew Leader 2
BPI Building Analyst 29
BPI Envelope Professional 10
BPI Residential Building Envelope Whole House Air Leakage Control
Installer 6
BPI Manufactured Housing Professional 0
BPI Heating Professional 3
This report is available at no cost from the 15National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
BPI Multifamily Professional 28
Building Operator Certification – Level I (BOC Level I) 11
Building Operator Certification – Level II (BOC Level II) 3
The City University of New York Energy Management and Indoor Air
Quality Certification 0
Energy Audit Institute Commercial Energy Audit Certification
1
General Professional Accreditations Licensed Architect 0
General Professional Accreditations Professional Engineer (PE)
0
International Facility Management Association Facility Management
Professional (FMP) 0
International Facility Management Association Certified Facility
Manager (CFM) 0
National Energy and Sustainability Institute Commercial Energy
Auditor Certification 0
National Environmental Balancing Bureau Building Systems
Commissioning Certified Professional 0
National Environmental Balancing Bureau Retro Commissioning
Certified Professional 0
Northwest Energy Education Institute Energy Management
Certification (EMC) 0
Testing, Adjusting, and Balancing Bureau Certified Commissioning
Contractor (CCC) 0
Testing, Adjusting, and Balancing Bureau Certified Commissioning
Supervisor (CCS) 0
University of California, Davis Professional Certification in
Energy Resource Management 0
The University of Wisconsin, Madison Commissioning Process
Certification 0
U.S. Green Building Council LEED AP BD+C 2
U.S. Green Building Council LEED AP Homes 0
U.S. Green Building Council LEED AP ID+C 0
U.S. Green Building Council LEED AP ND 1
U.S. Green Building Council LEED AP O+M 5
U.S. Green Building Council LEED Green Associate 8
Other Building performance credential 10
This report is available at no cost from the 16National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
82%
2%
Direct email invitation
Website
Figure 9. How respondents heard about the study
Overview of Study Respondents Ratings for Task Statements The mean
ratings for task frequency ranged from 1.68 to 3.45, and the mean
importance ratings ranged from 2.14 to 3.59. The standard deviation
(SD) of the mean was calculated for each task to illustrate how
closely the study responses tracked to each task mean. The smaller
the SD, the more clustered the study responses are in relation to
the mean and conversely, the greater the SD, the less clustered the
study responses are in relation to the mean.
The standard error of the mean (SEM) was also computed for each of
the task statements. The average ratings of all tasks had a
standard error of 0.15 (frequency ratings) and 0.16 (importance
ratings), indicating that if the study were repeated with a
different sample of study respondents similar results would be
expected. Table 5 contains the results of the frequency and
importance ratings as well as associated standard error of the
means.
This report is available at no cost from the 17National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Duties and Tasks Frequency Importance
Mean SD SEM Mean SD SEM
Facilitating Stakeholder Communication
Respond to Building Decision Maker Expectations 3.11 1.04 0.16 3.39
0.97 0.15
Respond to Tenants' Concerns 3.45 0.90 0.14 3.59 0.82 0.12
Develop an Operations and Maintenance Communication Plan 2.07 0.87
0.13 2.57 1.15 0.17
Manage Vendor Relations 2.89 1.10 0.17 2.67 0.99 0.15
Manage Contractor Relations 2.84 1.10 0.17 2.79 1.06 0.16
Establish Community Connections 2.14 1.05 0.16 2.14 0.85 0.13
Coordinate Building Access 3.18 1.06 0.16 3.00 1.01 0.15
Monitoring Current Building Performance
Establish Water Management Plan 1.98 0.85 0.13 2.53 1.01 0.15
Inspect Current Building Condition 3.41 0.92 0.14 3.45 0.90
0.14
Operating and Maintaining Building Systems
Create Operations and Maintenance Plan 2.23 0.91 0.14 2.70 1.00
0.15
Create Waste Management Plan 1.89 0.81 0.12 2.50 0.95 0.14
Procure Goods and Services 2.75 1.08 0.16 2.67 0.99 0.15
Train Operations and Maintenance Staff 2.61 1.10 0.17 2.84 1.16
0.17
Implement Work Order Systems 2.66 1.12 0.17 2.70 1.04 0.16
Implement Sustainability Site Plan 1.93 0.87 0.13 2.21 0.95
0.15
Ensuring Regulatory Compliance
Identify Regulatory Compliance Requirements 2.24 1.00 0.16 2.57
1.04 0.17
Educate Stakeholders about Regulatory Compliance 1.92 0.94 0.15
2.32 0.94 0.16
Ensure Regulatory Compliance 2.32 1.02 0.16 2.65 1.03 0.17
Improving Health and Safety
Create Workplace Safety Plan 2.33 1.06 0.17 2.84 1.15 0.19
Implement Workplace Safety Plan 2.59 1.12 0.18 2.89 1.16 0.19
Meet Occupational Safety and Health Administration (OSHA)
requirements 2.79 1.10 0.18 2.74 1.06 0.17
Test Personal Protective Equipment 1.68 0.74 0.12 2.22 0.95
0.16
Establish Building Security Plan 2.18 1.02 0.16 2.66 0.99
0.16
Develop Indoor Environmental Quality Plan 1.82 0.88 0.14 2.45 1.06
0.17
This report is available at no cost from the 18National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Mean SD SEM Mean SD SEM
Implement Integrated Pest Management Plan 2.38 1.02 0.16 2.82 1.04
0.17
Establish Emergency Preparedness Plan 2.10 0.99 0.16 2.79 1.07
0.17
Improving Building Performance
Manage Operations and Maintenance Budget 2.11 1.16 0.19 2.70 1.05
0.17
Review Building Operations Benchmarks 1.92 0.85 0.14 2.49 0.96
0.16
Identify Building Performance Improvement Measures 2.13 0.80 0.13
2.87 1.00 0.16
Support Capital Needs Assessment 1.84 0.79 0.13 2.27 0.99
0.16
Manage Unit Turn-Overs 2.97 1.26 0.20 3.11 1.09 0.18
Reliability of Tasks Ratings To determine the reliability of the
frequency and importance task ratings, Cronbach’s alpha was
computed for both the frequency and importance scales. Cronbach’s
alpha ranges from zero to one and is affected by the number of
questions and the number of respondents. An alpha value greater
than 0.70 is considered acceptable, one greater than 0.80 is
considered good, and one greater than 0.90 is considered excellent.
For this study, the frequency scales had an alpha of 0.90, and the
alpha for the importance scale was 0.93. These values indicate that
the frequency and importance ratings for each of the tasks have
excellent reliability and we can be confident that, as a whole, if
these tasks were rated again by the same respondents the same
results would be obtained.
Results of Post-Validation Review Meeting A subgroup of the
original SME panel that attended the multifamily building operator
workshop was convened via webinar and conference call on August 8,
2013 to conduct the following activities:
• Ensure that appropriate and representative individuals responded
to the study as understood by the SME panel subgroup
• Review the tasks identified as having lower combined ratings
(thus indicating they were ranked low in frequency, importance, or
both) to determine whether the tasks should be removed
• Review study respondent comments to determine whether any tasks
were missed during the JTA meeting
• Determine the final content outline.
The post-validation study participants were as follows:
• Babson, Clifford
• Calhoun, Renardon
This report is available at no cost from the 19National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
• Holden, Matthew
• Ilderton, Luke
• Kinaci, Andrew
• Meinking, Rick
• Patel, Asit
• Wildenberg, Andy
• Wolken, Chris.
Review of Study Respondent Demographics The post-validation study
meeting participants reviewed the demographic information
associated with the study participants and determined that a
representative sample of individuals responded to the study. In
other words, the post-validation study meeting participants—after
reviewing summarized demographic data for the respondents—felt that
the group of respondents adequately reflected the profession.
Review of Low-Rated Tasks The purpose of this activity was to
direct SME attention to the tasks that were rated lower by the
study respondents and to discuss those tasks to ensure they
belonged on the final content outline. Tasks that had a combined
mean frequency and importance rating below 8.00 (implying that the
task is performed less than “occasionally” and is less important)
were flagged for review during the post-study webinar.
The frequency and importance data was combined to form a single
scale using the formula below:
Overall rating scale = 2*Importance + Frequency
Importance ratings were given extra weight in the combined scale.
This is because while both frequency of task performance and task
importance are both valuable rankings in certification
credentialing examinations, importance is often thought of as
having more bearing and therefore, should receive greater emphasis
in the content outline. Nineteen tasks received a criteria rating
below 8 (listed in italics in Table 6) and were reviewed by the
reconvened SME panelists.
Based on the frequency and importance ratings of the validation
study, the post-validation study meeting participants decided to
delete one task (noted with strike-through), edit the wording of
six tasks (edits noted), and keep the other twelve low ranked
tasks, as they were determined to be important to the job of a
multifamily building operator and should therefore remain in the
final content outline.
Duties and Tasks Frequency Mean
Facilitating Stakeholder Communication
Respond to Tenants' Concerns 10.64
Develop an Operations and Maintenance Communication Plan Edit =
“Assist in the development of an Operations and Maintenance
Communication Plan”
7.20
Establish Water Management Plan 7.05
Inspect Current Building Condition 10.32
Operating and Maintaining Building Systems
Create Operations and Maintenance Plan Edit= “Assist with creation
of an Operations and Maintenance Plan” 7.64
Create Waste Management Plan Edit = “Assist with creation of a
Waste Management Plan”
6.89
Train Operations and Maintenance Staff 8.30
Implement Work Order Systems 8.05
Implement Sustainability Site Plan 6.36
Ensuring Regulatory Compliance
Educate Stakeholders about Regulatory Compliance 6.57
Ensure Regulatory Compliance 7.61
Improving Health and Safety
Meet Occupational Safety and Health Administration (OSHA)
requirements 8.27
Test Personal Protective Equipment 6.12
Establish Building Security Plan 7.50
This report is available at no cost from the 21National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Duties and Tasks Frequency Mean
Edit= “Assist with implementing a Building Security Plan”
Develop Indoor Environmental Quality Plan Edit= “Monitor indoor
environmental quality”
6.72
Establish Emergency Preparedness Plan Edit= “Comply with Emergency
Preparedness Plan”
7.68
Review Building Operations Benchmarks 6.89
Identify Building Performance Improvement Measures 7.87
Support Capital Needs Assessment 6.38
Manage Unit Turn-Overs 9.18
Review of Missing Tasks and Additional Comments Study respondents
were given an opportunity to identify tasks they felt were missing
from the content provided in the online validation study. Six
respondents submitted tasks, and all such items are included in
Table 7. The post-validation study meeting participants reviewed
each task and determined whether the content was already covered in
the existing DACUM chart or whether it was outside the scope of
professional practice. If it was not covered, the SMEs were asked
to add the task to the job description. All missing tasks
identified by the study respondents were already addressed or
outside the scope of the profession. To that end, no additional
tasks were added.
Missing Tasks
General Contractor
There needs to be more focus on the traditional building operator
role.
I did not see the bulk of the tasks a TYPICAL building operator
would need to perform: - Are they knowledgeable of the proper way
to repair the various components in the building that require
routine maintenance so as to ensure expected lifetime/durability? -
Do they understand BASIC building science (heat, moisture, airflow
properties) as it relates to the no-no's of building repair and
maintenance? - Do they understand material choices from a green
building/indoor air quality/durability perspective (low-emitting
carpet vs standard, recycled content, etc)? - Do they understand
how building systems operate and the required maintenance items of
those systems (this can be high level where maintenance is
typically performed by an outside contractor, such as elevator
maintenance). - Ability to oversee outside maintenance contractors'
work (did the boiler mechanic actually do what he said he did?) -
They need to understand basic building code, and be knowledgeable
of what they can/can't repair given their experience and licensing
(ie: can replace light fixture but shouldn't run new electrical) -
Do they understand what typical conservation measures are, how to
implement, and how to maintain those measures? - Are they familiar
with hazardous materials handling/storage and disposal (paints,
fluorescent bulbs)? - Do they understand what can/can't be
recycled, thrown away, composted? - Do they know how to read and
interpret a utility bill? - Etc.
Tenant Relations Manager; Community Relations Manager; Public
Relations Manager; Govt Relations Manager
O & M of building systems, particularly heating and
cooling.
jobs clasifications a Tasks are noted in their original format,
without edits, to maintain their integrity.
Lastly, study respondents were given an opportunity to provide
additional comments. Seven respondents submitted comments, and all
such items are included in Table 8. Upon reviewing the submissions,
the post-validation study meeting participants determined that the
comments specifically related to duties and tasks were already
addressed by the proposed content outline.
Table 8. Additional Comments Identified by Study Respondentsa
Additional Comments
The tasks described in this survey are not as targeted to building
operators as they should be. It seems the tasks described here are
a mixture of building operators, property mangers, resident
managers, and asset managers.
Building operator staff are very busy and dedicated personnel. The
industry does not value their time enough to support many of these
tasks. Better to focus effort on property management and
organization operations staff.
So far, the preceding items very clearly describe an ASSET MANAGER
role, not a building operator. However, the building operator may
be responsible for implementing, working under, and usually giving
feedback for some of the items developed by the asset manager.
Note, where the role did not seem appropriate for the operator, I
said it was never or occasionally performed but that it was
important or somewhat important. I want this to be interpreted that
it is important to happen, and the operator needs to understand at
least some of these aspects, but the operator is NOT responsible
for these aspects. Remember, in most multifamily buildings the
operator is the person replacing light bulbs, fixing toilets, and
doing routine maintenance. This is not the operator you find in a
large commercial building who is creating and implementing
strategic plans.
This report is available at no cost from the 23National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Most of the tasks in the Validation study seem better suited for a
Asset and/or Property Manager, and less so for an on-site MF
Building Operator. Development of Plans and Budgets is rarely the
responsibility of an onsite MF Building Operator
While all of these tasks are elements of providing O & M
services in a Multifamily Building, as building operators we are
the doers/implementers. Building Operators don't really function as
"Managers" so the tasks are not done by Building Operators, but the
tasks are valid and important.
The job tasks are performed almost daily, but the plans are
occasionally reviewed. Because the Bldg Operator juggles many
tasks/jobs and wears many hats, has little support, few resources,
etc, the plans are reviewed only occasionally, less frequently
mostly according to whenever problems arise or a crisis
occurs.
Here in NYC what you call a Building Operator we call a Building
Superintendent or a Resident Manager. Overall, your questions
betray a singular lack of understanding of what such a person has
as his daily job requirements. You need someone like me who is very
familiar with such things as one of your SMEs in order to bring
some reality to the proceedings.
Comments are noted in their original format, without edits, to
maintain their integrity.
Final Weighting of Task List and Proposed Content Outline The
post-validation study meeting participants reviewed the results of
the study and compared them to the proposed content outline that
resulted from the original JTA meeting. Table 9 contains the
content outline and task weights proposed by the JTA panelists
(column labeled SME Weights) and the content outline resulting from
the validation study (column labeled Study Weights). The
strike-through text indicates tasks that were re-worded or deleted,
or for which task weights were changed.
Table 9. Comparison of Validation Study Results with JTA SME
Panelists Weights
Duties and Tasks Overall Study SME Ratings Weights Weights
Facilitating Stakeholder Communication 21.4% 25%
Respond to Building Decision Maker Expectations 9.89 3.9% 5%
Respond to Tenants' Concerns 10.64 4.2% 5%
Develop an Operations and Maintenance Communication Plan Assist in
the Development of an Operations and Maintenance Communication
Plan
7.20 2.9% 3%
Establish Community Connections 2%
Establish Water Management Plan 7.05 2.8% 2%
Inspect Current Building Condition 10.32 4.1% 4%
This report is available at no cost from the 24National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Duties and Tasks Overall Ratings
Study Weights
SME Weights
Create Operations and Maintenance Plan 7.64 3.1% 5%
Create Waste Management Plan Assist with Creation of a Waste
Management Plan
6.89 2.8% 4%
Train Operations and Maintenance Staff 8.30 3.3% 5%
Implement Work Order Systems 8.05 3.2% 6%
Implement Sustainability Site Plan 6.36 2.5% 4%
Ensuring Regulatory Compliance 8.6% 10%
Identify Regulatory Compliance Requirements 7.37 3.0% 3%
Educate Stakeholders about Regulatory Compliance 6.57 2.6% 3%
Ensure Regulatory Compliance 7.61 3.0% 4%
Improving Health and Safety 24.3% 10%
Create Workplace Safety Plan 8.02 3.2% 1%
Implement Workplace Safety Plan 8.38 3.3% 2%
Meet Occupational Safety and Health Administration (OSHA)
requirements 8.27 3.3% 2%
Test Personal Protective Equipment 6.12 2.5% 1%
Establish Building Security Plan Assist with Implementing a
Building Security Plan
7.50 3.0% 1%
6.72 2.7% 1%
Establish Emergency Preparedness Plan Comply with Emergency
Preparedness Plan
7.68 3.1% 1%
Manage Operations and Maintenance Budget 7.51 3.0% 4%
Review Building Operations Benchmarks 6.89 2.8% 2%
Identify Building Performance Improvement Measures 7.87 3.1%
2%
Support Capital Needs Assessment 6.38 2.5% 2%
Manage Unit Turnovers 9.18 3.7% 5%
After much discussion, the content outline was finalized, taking
into consideration the results of the JTA meeting and the weighting
and comments from the validation study. The SMEs decided to keep
the SME weighting while adjusting the percentages in the duty area,
“Facilitating
Table 10. Final Content Outline for Multifamily Building
Operators
Duties and Tasks Weighting
Facilitating Stakeholder Communication 25%
Respond to Tenants' Concerns 5%
Assist in the development of an Operations and Maintenance
Communication Plan 3%
Manage Vendor Relations 4%
Manage Contractor Relations 4%
Coordinate Building Access 4%
Perform Resource Accounting 2%
Evaluate Operating Parameters 2%
Operating and Maintaining Building Systems 30%
Create Operations and Maintenance Plan 5%
Assist with creation of a Waste Management Plan 4%
Procure Goods and Services 6%
Train Operations and Maintenance Staff 5%
Implement Work Order Systems 6%
Implement Sustainability Site Plan 4%
Ensuring Regulatory Compliance 10%
Educate Stakeholders about Regulatory Compliance 3%
Ensure Regulatory Compliance 4%
Meet Occupational Safety and Health Administration (OSHA)
requirements 2%
Test Personal Protective Equipment 1%
Assist with implementing a Building Security plan 1%
This report is available at no cost from the 26National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Duties and Tasks Weighting
Implement Integrated Pest Management Plan 1%
Comply with emergency preparedness plan 1%
Improving Building Performance 15%
Review Building Operations Benchmarks 2%
Identify Building Performance Improvement Measures 2%
Support Capital Needs Assessment 2%
Manage Unit Turn-Overs 5%
Total 100%
The validation study confirmed that the job description for a
multifamily building operator developed and compiled by the 12 SME
panelists was accurate and thorough. Specifically, the study
validated the job-related tasks for a multifamily building operator
that had been identified by the SME panelist during the 3-day
workshop.
Analysis of the study data (study respondents’ frequency and
importance ratings of these job- related tasks) also provides a
benchmark to evaluate the weighting of the content outline that had
been developed by the SME panelists. This analysis provides greater
assurance that the final content outline produced as part of this
multifamily building operator JTA process can be used with
confidence to develop credentialing programs and/or
curriculum.
Brannick, M.T.; Levine, E.L.; Morgeson, F.P. (2007). Job and Work
Analysis: Methods, Research and Applications for Human resource
management. Thousand Oaks, CA: Sage.
Newman, L.S.; Slaughter, R.C.; Taranath, S.N. (1999, April). The
selection and use of rating scales in task studies: A review of
current job analysis practice. Paper presented at the annual
meeting of the National Council of Measurement in Education,
Montreal, Canada.
American Educational Research Association, American Psychological
Association, & National council on Measurement in Education.
(1999). Standards for educational and psychological testing.
Washington, DC: American Educational Research Association.
This report is available at no cost from the 28National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
To facilitate development of these multifamily-specific JTAs/KSAs,
Professional Testing, Inc. is seeking current industry
practitioners who have the experience and vision to help define and
promote energy efficiency in the multifamily housing sector by
participating in these JTA/KSA development workshops. Interested
individuals are invited to submit their credentials by Monday,
April 1st.
Please note that each JTA/KSA workshop is anticipated to last three
full days (excluding travel). Reimbursement for travel costs up to
a fixed amount, a travel per diem, and an honorarium will be
awarded to individuals selected for participation. Please visit
http://proftesting.rapidinsites.com for additional project details,
including how practitioners will be selected and where to direct
project-related questions.
NREL and Professional Testing, Inc. are excited to facilitate this
unique, foundational opportunity for industry practitioners to
provide their expertise and insight during this important
development process. Thank you for your time.
Sincerely, The NREL Home Energy Professionals Project Team
If you have any questions or comments about this email bulletin,
please contact
[email protected].
This report is available at no cost from the 29National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Appendix B. Job/Task Analysis for a Multifamily Building Operator
This appendix was developed as a result of the JTA workshop and
served as the foundation for building the online validation
study.
In addition to providing historical reference, this initial product
of the JTA process profiles the job of a multifamily building
operator, and may also be used to develop training or examination
content.
Multifamily Building Operator Job Description A multifamily
building operator efficiently operates and maintains building
systems, addresses tenant concerns, improves building performance,
and complies with regulations to support a comfortable, healthy,
and safe living environment.
A proposed content outline resulting from this Job/Task Analysis
follows.
Multifamily Building Operator Duty Areas A Facilitating Stakeholder
Communication B Monitoring Current Building Performance C Operating
and Maintaining Building Systems D Ensuring Regulatory Compliance E
Improving Health and Safety F Improving Building Performance
This Job/Task Analysis used input from a broad group of industry
practitioners and was facilitated by Professional Testing, Inc. for
the National Renewable Energy Laboratory (NREL) and funded by DOE’s
Weatherization Assistance Program (WAP).
Introduction The National Renewable Energy Laboratory secured the
services of Professional Testing to help develop a job/task
analysis (JTA) for multifamily building operators.
JTA is a procedure for analyzing the tasks performed by individuals
in an occupation, as well as the knowledge, skills, and abilities
required to perform those tasks. Specifically, a JTA can be defined
as “any systematic procedure for collecting and analyzing
job-related information to meet a particular purpose” (Raymond
2001). JTA can be used to describe, classify, and evaluate jobs;
ensure compliance with legal and quasi-legal requirements; develop
training, promote worker mobility, plan workforces, increase
efficiency and safety, and appraise performance (Brannick et al.
2007).
JTA is traditionally used by secondary and postsecondary educators,
test developers, and business, industry, government, and military
trainers to help identify core knowledge areas, critical work
functions, and skills that are common across a representative
sampling of current practitioners.
This report is available at no cost from the 30National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
This project used the “developing a curriculum” (DACUM) method to
conduct a JTA. DACUM is an occupational analysis led by a trained
facilitator, where practitioners in a specific occupation come
together for a multiday workshop to provide input about the
specific tasks, knowledge, and skills needed to perform their
job.
This appendix provides draft results of the analysis and will form
the basis for a subsequent “industry validation” phase, where a
larger group of industry practitioners will evaluate the list of
job-related tasks. This group will ensure that the identified tasks
and weighting factors accurately represent the job of a multifamily
building operator. This step will also provide an opportunity for
industry to identify any missed tasks or any that were included
erroneously.
The content presented in this appendix was created by industry
practitioners and is intended to portray the job of a multifamily
building operator as currently practiced.
Subject Matter Expert Selection Process Professional Testing helped
to establish the criteria for selecting the DACUM panel of subject
matter experts (SMEs). To be eligible for the workshop panel,
applicants were required to submit an electronic application and to
demonstrate that they were active practitioners in their field. To
create a representative panel of practitioners, Professional
Testing, with NREL, established criteria to select SMEs from a
larger applicant pool to ensure:
• Geographic (including regional/climatic) diversity
• Representation of a wide range of experience levels (novice to
expert)
• No single organization or organization size dominated the
group
The DACUM Philosophy
Practitioners can describe and define their jobs more accurately
than anyone else. One of the most effective ways to define a job is
to describe the tasks practitioners perform.
All jobs can be effectively and sufficiently described in terms of
the tasks successful workers perform.
All tasks, to be performed correctly, demand certain knowledge,
skills, abilities, attributes, and tools.
• All sectors were represented with no single sector dominating
(public versus private)
• Diversity of industry-related credentials, represented by the
panelists.
Twelve applicants meeting the above criteria were selected to
create the multifamily building operator SME panel.
Job/Task Analysis Workshop The multifamily building operator JTA
workshop was held in Lakewood, Colorado, May 9-11, 2013.
Day 1 consisted of an introduction to the DACUM process. The
trained DACUM facilitator explained the JTA process and provided
the SME panel with duty and task statement definitions. A duty
reflects a large area of work for a specific profession; multiple
tasks describe how to perform each duty.
This report is available at no cost from the 31National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
The presentation then shifted to a discussion about multifamily
building operators, more specifically the “who, how, what, and why”
of the profession. The SME panelists compiled this information into
a comprehensive list to capture key multifamily building operator
job components.
The next step was to identify duty (or domain) areas. Once the SME
panelists reached consensus on the duty areas, they delineated each
duty by identifying the required tasks.
On Day 2, the facilitator projected a spreadsheet that contained
the identified duty areas and corresponding task statements. The
SMEs were asked to list the steps under each task and to identify
the knowledge, skills, abilities, and tools needed to complete each
task.
On Day 3, work concluded with the SMEs finalizing an overarching
job description for multifamily building operators.
Results This appendix presents aspects of a multifamily building
operator, as captured by the 12-member panel during the May 9-11,
2013 JTA workshop in Lakewood, Colorado. The tables that follow
reflect job requirements and are meant to provide a clear
understanding and detailed description of the work performed.
References Brannick, M. T.; Levine, E. L.; Morgeson, F. P. (2007).
Job and work analysis: Methods, research and applications for human
resource management. Thousand Oaks, CA: Sage.
Raymond, M.R. (2001). Job analysis and the specification of content
for licensure and certification examinations. Applied Measurement
in Education 14(4), 369-415.
Nomenclature Table B-1 provides a list of the acronyms and
abbreviations used in this appendix. In addition to increasing the
efficiency of communications, many technical and process acronyms
are useful in memory retention and learning. Occupational acronyms
are therefore of interest to trainers and curriculum
designers.
This report is available at no cost from the 32National Renewable
Energy Laboratory (NREL)
at www.nrel.gov/publications.
Table B-1. List of Acronyms and Abbreviations
Nomenclature Definition
ASHRAE American Society of Heating, Refrigeration, and Air
Conditioning Engineers
CBA Cost benefit analysis
DACUM Developing a curriculum
EPA Environmental protection agency
HUD Department of Housing and Urban Development
IEQ Indoor environmental quality
IPM Integrated pest management
MSDS Material safety data sheets
NFPA National Fire Protection Association
O&M Operations and Maintenance
OSHA Occupational Safety & Health Administration
PPE Personal protective equipment
SME Subject matter expert
Proposed Content Outline The SMEs rated the list of job-related
tasks composing duties defined during the JTA workshop based on a
two-factor scale: the importance of the duty area to overall job
performance and the frequency with which duties are performed. The
result is a weighted ranking of the duties and tasks known as a
content outline. After reviewing the results of their ratings, the
SMEs made qualitative judgments as to how they would adjust the
rating to reflect their practice.
The proposed content outline provides an initial basis from which
an assessment (e.g., a certification or licensure examination) may
be constructed and provides curriculum developers with a model to
align training to the core needs of the occupation.
Table B-2. Proposed Content Outline for Multifamily Building
Operators
Duties and Tasks Weighting
1 Respond to Building Decision Maker Expectations 4.59% 5%
Duties and Tasks Weighting
3 Develop an Operations and Maintenance Communication Plan 3.20%
3%
4 Manage Vendor Relations 3.80% 3%
5 Manage Contractor Relations 3.80% 3%
6 Establish Community Connections 1.80% 2%
7 Coordinate Building Access 4.39% 4%
B Monitoring Current Building Performance 11.19% 10%
1 Perform Resource Accounting 2.40% 2%
2 Evaluate Operating Parameters 2.20% 2%
3 Establish Water Management Plan 2.00% 2%
4 Inspect Current Building Condition 4.59% 4%
C Operating and Maintaining Building Systems 18.23% 30%
1 Create Operations and Maintenance Plan 3.20% 5%
2 Create Waste Management Plan 2.40% 4%
3 Procure Goods and Services 3.99% 6%
4 Train Operations and Maintenance Staff 3.20% 5%
5 Implement Work Order Systems 3.70% 6%
6 Implement Sustainability Site Plan 1.74% 4%
D Ensuring Regulatory Compliance 9.79% 10%
1 Identify Regulatory Compliance Requirements 3.00% 3%
2 Educate Stakeholders about Regulatory Compliance 2.60% 3%
3 Ensure Regulatory Compliance 4.19% 4%
E Improving Health and Safety 19.85% 10%
1 Create Workplace Safety Plan 2.40% 1%
2 Implement Workplace Safety Plan 3.30% 2%
3 Meet Occupational Safety & Health Administration (OSHA)
requirements 3.40% 2%
4 Test Personal Protective Equipment (PPE) 2.40% 1%
5 Establish Building Security Plan 2.60% 1%
6 Develop Indoor Environmental Quality Plan 1.55% 1%
7 Implement Integrated Pest Management Plan 1.80% 1%
8 Establish Emergency Preparedness Plan 2.40% 1%
F Improving Building Performance 14.77% 15%
1 Manage Operations and Maintenance Budget 3.60% 4%
Duties and Tasks Weighting
3 Identify Building Performance Improvement Measures 2.40% 2%
4 Support Capital Needs Assessment 2.40% 2%
5 Manage Unit Turn-Overs 3.97% 5%
100.00% 100%
Knowledge The SMEs identified and categorized specific types of
knowledge needed to be a proficient multifamily building operator
(Table B-3). General knowledge areas (calculations, basic
measurements, and communications), although not exclusive to this
occupation, were also identified using a group consensus process
(Table B-4). The panelists concluded that a practitioner must
master the knowledge in both tables to be competent as a
multifamily building operator.
Table B-3. Specialized Knowledge Required of Multifamily Building
Operators
Specialized Knowledge Analyze water usage ASHRAE ventilation Basic
accounting Building automation systems Building management Building
resilience plan Building science Building systems Business
management Cost benefit analysis Certification requirement Codes,
standards, and regulations Community culture Company culture
Condition indicators Construction management Cost benefit analysis
Cultural context of building tenants Data normalization Emergency
management Energy efficiency Energy efficient measures Energy
improvement measures Environmentally friendly products EPA Fair
housing law Finance General building General construction General
operations of a multifamily building General security Hazardous
materials Hazardous waste Human resources HVAC Integrated pest
management references Irrigation reduction Landscaping Level-1
audit Life cycle analysis Local regulatory requirements Local
vendor market conditions Marketing Moisture control
Specialized Knowledge OSHA regulations Pests PPE Procurement
policies Purchasing contracts Rain water harvesting Regulatory
compliance Regulatory requirements Risk hazard analysis Space
heating Supply chain Tenant/owner law Typical apartment water usage
Utility rate structure Waste management Water conservation measures
Xeriscaping
Table B-4. General Knowledge Required of Multifamily Building
Operators
General Knowledge
Figure averages Make rough estimates
Perform math operations using signed (positive and negative)
numbers
Perform math operations using single and multiple digit
numbers
Perform mathematical operations with decimals Perform mathematical
operations with fractions
Perform simple math operations of addition Perform simple math
operations of division
Perform simple math operations of multiplication Perform simple
math operations of subtraction
Solve percent problems Solve ratio problems
Transfer number sequences from a source into a column Use a
calculator
Basic Measurements
Calculate the perimeter and areas of common figures
Convert measurements from one unit to another (English to Metric,
etc.)
Estimate and approximate measurements Find the dimensions of an
object from a scale drawing
Measure area (square inches, square centimeters, etc.) Measure
board feet
Measure length to 1/32 of an inch Measure linear distances (length,
width, etc.)
Measure temperature to within 1 degree Fahrenheit Measure volume
(cubic inches, liters, etc.)
Measure weights using devices calibrated in ounces
Measure weights using devices calibrated in pounds
Read and use the scale of a drawing Read measurements taken with
common measuring tools
Read, interpret, and use size-scale relationships Record
measurements, using appropriate unit notations (feet, yards,
etc.)
General Knowledge
Use tools to measure quantities and solve problems involving
measurements
Communications
Communicate with co-workers and/or business people in writing
(letters, memos)
Communicate with co-workers and/or business people verbally
(face-to-face)
Communicate with co-workers and/or business people verbally
(telephone, radio)
Compare names Evaluate options/alternatives
Evaluate solutions Explain procedures
Find information in catalogs Find information in references
(Machinery handbook, tap/drill charts, etc.)
Follow verbal job instructions Listen
Participate in brainstorming Present to others
Read and follow a map, chart, plan, etc. Read and follow directions
found in equipment manuals and code books
Communications
Read and interpret directions found on labels, packages, or
instruction sheets
Read codes (building codes, electrical codes, standards,
etc.)
Read drawings and specifications sheets Read drawings and
specifications sheets
Read information from tables and graphs (bar, circle, etc.) Read
flowcharts
Read information from tables and graphs (bar, circle, etc.)
Research information
Summarize information Write reports
Write words and numbers legibly
Skills, Abilities, and Attributes A proficient worker possesses key
skills, abilities, and attributes that influence job success.
Skills are developed through experience and training and may apply
to a wide range of tasks; proper skills enable workers to perform
their tasks with precision and quality.
Abilities and attributes are more fundamental than knowledge and
skills; they represent underlying, enduring traits, both cognitive
and physical, that support the successful performance of a wide
range of job tasks.
The panelists identified task-specific skills and abilities, as
well as broad attributes (e.g., analytic, creative, patient), to
define the recommended traits a multifamily building operator
should possess (Table B-5).
Human Resource professionals and job analysts often analyze skills,
abilities, and attributes to compare jobs in terms of worker
characteristics.
Table B-5. Skills, Abilities, and Attributes Required of
Multifamily Building Operators
Skills, Abilities, and Attributes
Empathetic Enthusiasm
Ethical Focused
Goal-oriented Helpful
Honest Industrious
Initiative Integrity
Leader Listening
Skills, Abilities, and Attributes
Tactful Team player
Work in teams Written communication
Physical Conditions In any job, the environment in which tasks are
completed and the specific physical requirements necessary to
complete each task must be understood. Awareness of physical
conditions is useful for a variety of purposes, including ergonomic
design, safety analysis, and the identification of job elements
that are deemed essential functions for compliance with The
Americans with Disabilities Act.
Table B-6 contains the list of panelist-recommended physical
conditions a multifamily building operator should possess.
Table B-6. Physical Conditions Recommended for Multifamily Building
Operators
Physical Conditions
Bend forward frequently Carry heavy objects while climbing
(ladders, scaffolding, etc.)
Carry Objects of up to 50 pounds Climb ladders, stairs, poles, etc.
using legs and/or arms
Crawl or creep Detect abnormal noises
Feel size, shape and temperature or texture of objects with the
hands Handle hot or cold objects
Handle toxic materials Hear speech
Hold or move objects using the fingers Hold or move objects using
the hands but not the fingers
Judge depth (the position and distance of objects) with the eyes
Lay on back
Lift 50 pounds maximum Lift objects from ground to overhead
level
Lift objects from ground to waist level Lift objects from waist to
overhead level
Physical Conditions
Pull objects with arms or hands Push objects with arms or
hands
Reach with arms and hands in any direction See and discriminate
colors
See clearly at 20 feet or more (with/without optical
assistance)
See clearly at 20 inches or less (with/without optical
assistance)
Sit part of the time Stand all of the time
Stand at all (could the work be performed from a sitting position?)
Stand part of the time
Stoop kneel or crouch Talk
Use digging or chopping motion while working Walk
Work around or near high voltage power sources or equipment
Work around or near magnetic equipment or materials
Work at heights of 1 to 25 feet above ground or floor level
Work in a squatting position for more than 5 minutes per hour
Work in changing temperatures (in and out of buildings repeatedly)
Work in confined spaces
Work in damp places (high humidity, some standing water)
Work in dry places (lacking any natural moisture or humidity)
Work in dust, oils, fumes, or smells Work in high temperatures (85
to 130 degrees Fahrenheit)
Work in low temperatures (0 to 45 degrees Fahrenheit)
Work in noisy places (85 decibels or higher with ear
protection)
Work in one place (no change of work location) Work in stale air
(with some oxygen depletion)
Work in sub-zero temperatures (0 and lower) Work inside
Work on slippery surfaces Work outside
Work while sitting or standing on high roofs, overhangs, or I-beams
Work while standing on portable ladders
Work while standing on scaffolding Work while wearing protective
equipment (respirators, hoods, etc.)
Work with hands and arms over head level Work with or near
fiberglass or asbestos materials
Work with or near plastic resins
Tools, Equipment, and Resources Each occupation requires a unique
set of support materials. It is important to identify the tools,
equipment, and other tangible objects, as well as the resources
(e.g., information technologies, codes and standards) required for
a worker to effectively accomplish tasks. Table B-7 lists the
panelist-identified inventory of tools, equipment, and resources
necessary to perform the identified tasks.
Table B-7. Tools, Equipment, and Resources Used by Multifamily
Building Operators
Tools, Equipment, and Resources
ADA ASHRAE
Building decision maker's goals Building organizational flow
chart
Building plans Building system logs
Camera Capital budget
Communication device Community outreach programs
Computer Contract
HUD IPM Guidebook HUD IPM manual
Human resources IEQ manual
Inspection instruments Inspection schedules
Labor agreements Lease
LEED Lobbying organizations
Medical facilities MSDS sheets
Office supplies Operational budget
Organization's health and safety plan Organization's policies and
procedures
Organization's procurement policy OSHA
Tools, Equipment, and Resources
OSHA handbook OSHA training
OSHA training facilities OSHA training publications
Pest control equipment Phone
PPE Printed materials from regulatory agencies
Printed materials from trade associations Procurement policy
Professional network Recycling resources
Related signage Security company
Security systems Site IPM
Trade associations Trend data
Utility data Vendor logs
Vendor schedules Visitor logs
Work order log Workplace safety plan
www.dsireusa.org www.waterworks.org
Inspection Tools
Anemometers Binoculars
Combustion analyzers Contact thermometer
Data loggers Digital multimeter
Flashlight Gas leak detector
Smoke stick Tape measure
Tools, Equipment, and Resources
Structural Systems Telecommunication Systems
Dust Mask Respirator mask
Kneepads Tyvek suit
DACUM Chart The DACUM chart (Table B-8) is a tabular representation
of the JTA. Capital letters identify major job duty areas. Numbers
identify tasks, and lowercase letters identify the steps required
to accomplish each task. Moving horizontally across the chart,
adjacent columns detail (1) specialized knowledge, (2) skills and
abilities, and (3) tools, equipment, and resources required to
perform each task. The information contained in these columns is
related to each task and does not necessarily correspond to a
specific step.
The importance of the DACUM chart is to show the relationship
between job tasks and the specialized knowledge, skills and
abilities, and tools, equipment, and resources required to perform
each task. This concept, called job-relatedness, is essential to
compliance with key legal and professional validity standards
pertaining to the use of JTA information in employee selection.
Such information is also critical to the development of high-stakes
assessments for occupational licensing and certification
examinations.
The DACUM chart depicts the job element relationships associated
with each task, and can therefore easily be used to assess the
relevance of current programs (curriculum), develop instructional
objectives and training content, sequence instructional materials,
and develop examination, competency, and performance evaluation
instruments.
Table B-8. DACUM Chart for Multifamily Building Operators
Duties, Tasks, and Steps Special Knowledge Skills and Abilities
Tools, Equipment, and Resources
A
a Obtain building decision maker's goals General operations of
a
multifamily building Basic accounting Management Negotiating Verbal
communication Written communication
Computer Phone
communication protocol
and responsibilities
involvement
responsibilities
maker
response expectations
review process
2
tenants Fair housing law Tenant/owner law
Interpersonal Negotiating Problem solving Verbal
communication
Computer Lease Maintenance management system Phone Work order
log
b Create response timeline protocol
c Communicate level of service offered to
tenants
Duties, Tasks, and Steps Special Knowledge Skills and Abilities
Tools, Equipment, and Resources
3
a Formalize organizational flow chart Company culture Verbal
communication
Written communication Building decision maker Building
organizational flow chart
b Create a phone tree
c Designate emergency contacts
operations and maintenance staff
f Update communication plan
conditions Purchasing contracts Supply chain
Negotiating Verbal communication Written communication
Organization's health and safety plan Organization's procurement
policy OSHA handbook MSDS sheets
b Identify vendor terms and conditions
c Review vendor performance
General construction Regulatory compliance
Building plans Camera Codes, standards, and regulations Contract
Equipment manuals Health and safety