Multihog Brochure

One Machine, One Driver, Endless Applications ‘12

HIGHWAYS

■ Patch Planer■ Surface and Line

Removal Planer■ Barrier Mower■ Pallet Forks and Mast■ Bucket■ Flail Deck Mower■ Hedge Cutter■ Verge Mower■ Stump Grinder■ Wood Chipper■ Rear Mounted Signage

MUNICIPAL

■ Patch Planer■ Surface and Line

Removal Planer■ Bucket■ Flail Deck Mower■ Verge Mower■ Rotary Mower■ Cylinder Mower■ Barrier Mower■ Stump Grinder■ Wood Chipper ■ Snow Plough■ Gritter■ High Capacity De-Icing

Chemical Sprayer – Standard■ High Capacity De-Icing

Chemical Sprayer – With Pressure Washer

■ Chemical Sprayer ■ Pallet Forks and Mast■ Sweeper■ Rear Mounted Signage

WINTERMAINTENANCE

■ Snow Plough■ Snow Brush■ Snow Plough & Brush■ Gritter■ Snow Blower■ High Capacity De-Icing



AIRPORTS ANDAIRFIELDS

■ Snow Plough■ Snow Brush■ Snow Plough and Brush■ Gritter■ Snow Blower■ High Capacity De-Icing



■ Hedge Cutter■ Rotary Mower■ Pallet Forks and Mast■ Surface and Line

Removal Planer■ Patch Planer

GROUNDCAREAND FORESTRY

■ Hedge Cutter■ Flail Deck■ Rotary Mower■ Cylinder Mower■ Chemical Sprayer■ Wood Chipper■ Stump Grinder■ Bucket

DISTRIBUTIONCENTRES

■ Pallet Forks and Mast■ Hedge Cutter■ Flail Deck■ Sweeper■ Snow Plough■ Gritter■ Towing

CONTENTS

3

04 08 12 16 20 24

4 5

BUCKET

This universal heavy duty 1300mm bucket attachment with heat treated cutting edge can be used to lift, grade and tip a variety of debris. The bucket’s 91° dual assisted high tipping action and large 0.3m³ capacity enables quick transportation and depositing of large quantities of material to where it is required. Bucket placement is a very simple operation thanks to standard features such as lift, tilt and 450mm side shift. The long life cycle and maximum uptime of this straightforward attachment is further extended by the 2 pack powder coat process which minimises the risk of corrosion.

PALLET FORKS AND MAST

Carriage mounted pallet forks in a range of sizes also incorporating side shift make an effective all round attachment for general yard duties. Various lift height options using simplex, duplex and triplex masts with full free lift are available for the loading and unloading of vehicles.

We also offer the option of telescopic forks where required.

BARRIER MOWER

This niche attachment has two independently hydraulically driven mower discs that give a combined cutting width of 1200mm. This unit can operate both sides of the carriageway by using the quick changeover assembly function.

The barrier mower’s spring loaded cutting heads give a fast and effective � nish to what is the most intricate of cutting applications.

PATCH PLANER

With our road planer attachment you can plane the surfaces to a width of 400mm and a depth of 125mm. This planer will save time as well as the cost of in� ll materials by accurately removing only what you need. This helps to produce a sound base for reinstatement and reduces transport and recycling costs by creating a re-usable material.

Overall it’s faster, cleaner and quieter than many other machines available on the market, reducing costs whilst increasing productivity due to the excellent visibility and control.

HIGHWAYS

SURFACE AND LINE REMOVAL PLANER

The surface line remover has an effective cutting width of 300mm + 50mm x 2 taper edges so you can erase lines from asphalt or concrete quickly. Surface level adjustment is carried out by 2 manually operated screws allowing adjustments of 0.25mm increments. This attachment is ideal for use on highways, car parks and air� elds.

“OUR PROGRAMME OF PERMANENT PATCHING REPAIRS USING THE MULTIHOG ENABLES US TO BE FOUR TIMES MORE PRODUCTIVE THAN WITH PREVIOUS METHODS AND HAS MADE A GREAT CONTRIBUTION TOWARDS RECTIFYING THE SITUATION.”

—DAVID RUSSELL, ROAD OPERATIONS MANAGER, GLASGOW CITY COUNCIL

76

REAR MOUNTED SIGNAGE

Numerous options are available for traf� c control, direction of working and lane closure etc. Both standard and LED con� gurations can complement the machine when working.

A fully programmable display allows you to customise each sign to suit the demands of your changing operation.

STUMP GRINDER

This heavy duty MM530XR stump grinder attachment offers unmatched performance, speed and operator comfort. The extending power arm covers a large working area of around 1.8m² so that once the machine is in position most jobs can be � nished without the need to move it, saving time and improving site safety. All functions are controlled from within the cab via the joystick, eliminating any risk of hand arm vibration. Using the Multihog’s power source delivers up to 53 HP and increased torque for quicker cutting operations. The cutting wheel is designed for easy maintenance and quick and straightforward teeth replacement. Standard � nger teeth can also be replaced with heavier duty green teeth if required.

VERGE MOWER

High visibility, front mounted � ail arm with interchangeable heads.

This side shifting and traversing attachment allows the cutting of a variety of vegetation on both sides of the machine. It will also comfortably cut around an obstruction without steering the machine in the opposite direction.

This attachment also folds � at for 100% visibility when in the travelling position. Standard speci� cation is 4000mm arm and 1250mm � ail head.

HEDGE CUTTER

Heavy duty 4000mm reach mower combined with 1250mm � ail head. This front mounted attachment increases productivity and safety by allowing the operator to look ahead at all times.

This attachment can be used for all types of grass and hedge cutting.

HIGHWAYS

FLAIL DECK MOWER

The � ail deck comes in a variety of cutting widths of up to 2m and also has the added bene� t of an integrated side shift.

This unit is most suited to heavy grass and thick shrubbery. A driver friendly � oat mechanism makes this attachment a joy to use.

WOOD CHIPPER

The new 9" x 9" DFR twin hydraulic feed roller chipper offers powerful performance, value for money and low maintenance unmatched by other machines on the market. It is remarkably easy and straightforward to operate and has two double sided blades for long life operation. The design features a wide access easy feed hopper, which is angled to increase operator safety when working in roadside applications. An added extra is a high rise spout to direct the chips over the cab into a trailer.

8 9

SNOW BLOWER

An extremely heavy duty attachment designed for deep snow removal.

This is a two stage rotary snow plough and thrower with a cylinder diameter of 650mm and a throwing wheel diameter of 700mm. Total clearing depth of 940mm and overall working width of 2200mm make this attachment extremely versatile. The hydraulically operated chute allows the operator to direct the snow from within the cab into the chosen direction at the touch of a button.

GRITTER

Hydraulically operated rear mounted gritter unit. With a total capacity of 1m3, this gritter mounts and de-mounts the Multihog in minutes.

The spreading width is adjustable from between 1 and 8m and the material quantity is adjustable from between 5g/m2 and 250g/m2. The compact design coupled to the Multihog allows access to the most restricted areas.

SNOW PLOUGH AND BRUSH

This combined plough and brush attachment is perfect for all types of snow clearance and removal. The plough is easily changed to brush and vice versa at the touch of a button – you don’t even have to leave the comfort of your cab.

SNOW BRUSH

Hydraulically operated snow brush with a total working width of 2100mm, � tted with a 600mm diameter open � ight, polypropylene brush. The operator can move the brush from left to right by 30 degrees in each direction via the joystick inside the cabin, giving full mechanical control of this winter attachment.

SNOW PLOUGH

Heavy duty hydraulic lift, tilt and angle snow plough with a 2400mm blade which can swivel 30 degrees to each side. The snow plough is spring loaded and comes complete with nylon wear strip for trouble free snow clearance in hard to reach areas such as narrow lanes, cul-de-sacs and town centres.

Note: overall width of 2100mm when plough is angled to 30 degrees.

WINTERMAINTENANCE

WINTERMAINTENANCE

“BY AUGMENTING OUR EXISTING WINTER RESILIENCE FLEET WITH THE TWO MULTIHOGS, WE HAVE BEEN ABLE TO IMPROVE THE EFFECTIVENESS OF OUR SNOW CLEARING SERVICE ACROSS WEST LOTHIAN.”

—TOM WARD, SUPERVISOR OF ROAD SERVICES, WEST LOTHIAN COUNCIL

1110

HIGH CAPACITY DE-ICING CHEMICAL SPRAYER – STANDARD

A 1200Ltr low level � ll stainless steel tank with in-cab controller incorporating pressure control, main on/off and 3 sectional controls.

The 3 sectional boom includes a middle boom which sprays to the width of the Multihog. Two outer nozzles give a 4m width on both sides for a total spray width of up to 10m.

The sprayer can be mounted or demounted from the Multihog within minutes.

HIGH CAPACITY DE-ICING CHEMICAL SPRAYER – WITH PRESSURE WASHER ATTACHMENTS

The speci� cation is exactly the same as the standard de-icing sprayer but incorporates 2 extra functions as follows:

1) A low pressure lance with a 10m reach hose which enables the operator to spray de-icing � uid into extremely con� ned areas inaccessible to the Multihog.

2) A high pressure 10m hose which allows the tank to be used to hold water for the cleaning of signs, road markings, vehicles etc.

MUNICIPAL

12 13

PATCH PLANER

With our road planer attachment you can plane the surfaces to a width of 400mm and a depth of 125mm. This planer will save time as well as the cost of in� ll materials by accurately removing only what you need. This helps to produce a sound base for reinstatement and reduces transport and recycling costs by creating a re-usable material.

Overall it’s faster, cleaner and quieter than many other machines available on the market, reducing costs whilst increasing productivity due to the excellent visibility and control.

BUCKET


FLAIL DECK MOWER



VERGE MOWER

High visibility, front mounted � ail arm with interchangeable heads.

This side shifting and traversing attachment allows the cutting of a variety of vegetation on both sides of the machine. It will also comfortably cut around an obstruction without steering the machine in the opposite direction.

This attachment also folds � at for 100% visibility when in the travelling position. Standard speci� cation is 4000mm arm and 1250mm � ail head.

ROTARY MOWER

This 3.4m wide area rotary mower is excellent for increasing productivity in grass cutting operations. Covering large areas in a short space of time combined with different cutting lengths mean that a variety of tasks can be completed with this single attachment.



MUNICIPAL

1514

WOOD CHIPPER


SNOW PLOUGH

Heavy duty hydraulic lift, tilt and angle snow plough with a 2400mm blade which can swivel 30 degrees to each side. The snow plough is spring loaded and comes complete with nylon wear strip for trouble free snow clearance in hard to reach areas such as narrow lanes, cul-de-sacs and town centres.

Note: overall width of 2100mm when Plough is angled to 30 degrees.

GRITTER


The spreading width is adjustable from between 1 and 8m and the material quantity is adjustable from between 5g/m2 and 250g/m2. The compact design coupled to the Multihog allows access to the most restricted areas.




BARRIER MOWER

This niche attachment has two independently hydraulically driven mower discs that give a combined cutting width of 1200mm. This unit can operate both sides of the carriageway by using the quick changeover assembly function.

The barrier mower’s spring loaded cutting heads give a fast and effective � nish to what is the most intricate of cutting applications.

STUMP GRINDER

This heavy duty MM530XR stump grinder offers unmatched performance, speed and operator comfort. The extending power arm covers a working area of ca. 1.8m² enabling most jobs to be � nished without moving the Multihog, saving time and improving site safety. In-cab function control eliminates any risk of hand arm vibration. The Multihog’s power source delivers up to 53 HP and increased torque for quicker cutting operations. The easy maintenance cutting wheel comes with standard � nger teeth, with an option of heavier duty green teeth.

CHEMICAL SPRAYER

This universal 500Ltr capacity water unit is available with 4m and 6m spray arms. The arms fold conveniently for travel and the additional hoppers enable the use of individual chemical mixes and dilution rates required for each speci� c job.

This attachment also suits a variety of ‘pre-spraying’ operations using any dilution rate of salt water / brine solution. As with all Multihog attachments this unit can be mounted and demounted in minutes.




The Sprayer can be mounted or demounted from the Multihog within minutes.

REAR MOUNTED SIGNAGE

Numerous options are available for traf� c control, direction of working and lane closure etc. Both standard and LED con� gurations can complement the machine when working.

A fully programmable display allows you to customise each sign to suit the demands of your changing operation.

SWEEPER

This 2300mm wide sweeper has a quick change adaptor complete with roller levelling system, hydraulic opening waste collector and a water spray system. The broom can be adjusted to sweep waste into a gulley or to be collected into the hopper.

The 200Ltr water spray system minimises dust while the hydraulic operating side brush allows the sweeping of areas with limited access.


The speci� cation is exactly the same as the standard de-icing sprayer but incorporates 2 extra functions as follows:

1) A low pressure lance with a 10m reach hose which enables the operator to spray de-icing � uid into extremely con� ned areas inaccessible to the Multihog.

2) A high pressure 10m hose which allows the tank to be used to hold water for the cleaning of signs, road markings, vehicles etc.

CYLINDER MOWER

This hydraulically operated 7 gang cylinder mower is used for a � ne � nish for applications such as golf courses and � ner park lands.

Each mower unit can be operated independently allowing operation in even the tightest of areas – this is complemented by the pivot steer of the Multihog MH90.

AIRPORTSAND AIRFIELDS

16 17

SNOW PLOUGH

Heavy duty hydraulic lift, tilt and angle snow plough with a 2400mm blade which can swivel 30 degrees to each side giving an overall width of 2100mm. The snow plough is spring loaded which allows de� ection of pressure over any raised objects and the tension can be set to suit the required application. The nylon wear strip helps to maintain the plough’s ef� ciency for trouble free snow clearance both in landside or airside operations.

SNOW BRUSH

Hydraulically operated snow brush with a total working width of 2100mm, � tted with a 600mm diameter open � ight, polypropylene brush. The operator can move the brush from left to right by 30 degrees in each direction via the joystick inside the cabin, giving full mechanical control of this back to black winter attachment. Excellent visibility from the cab enables the Multihog to get up close to the aircraft for a safe and thorough clean sweep.

SNOW PLOUGH AND BRUSH

This combined plough and brush attachment is perfect for all types of snow clearance and removal. The plough is easily changed to brush and vice versa at the touch of a button – you don’t even have to leave the comfort of your cab!

Together with the articulated Multihog base unit this attachment is in� nitely more manoeuvrable than other machines for accessing the tight spaces around aircraft on occupied stands. It is therefore the ideal tool for safe and productive stand clearance.

GRITTER


The spreading width is adjustable from between 1 and 8 metres and the material quantity is adjustable from between 5g/m2 and 250g/m2. The compact design coupled to the Multihog allows access to the most restricted areas landside or airside.

SNOW BLOWER

An extremely heavy duty attachment designed for deep snow removal. This is a two stage rotary snow plough and thrower with a cylinder diameter of 650mm and a throwing wheel diameter of 700mm. Total clearing depth of 940mm and overall working width of 2200mm make this attachment extremely versatile.

The hydraulically operated chute allows the operator to direct the snow from within the heated cab into the chosen direction at the touch of a button.

AIRPORTSAND AIRFIELDS

1918

ROTARY MOWER

This 3.4m wide area rotary mower is excellent for increasing productivity in grass cutting operations. Covering large areas in a short space of time combined with different cutting lengths means that a variety of tasks can be completed with this single attachment. The batwing design, operated by the in cab joystick, allows easy access through gates and tight areas to facilitate both landside and airside operations.

HEDGE CUTTER

Heavy duty 4000mm reach mower combined with 1250mm � ail head. This attachment can be used for all types of grass and hedge cutting and as it is front mounted this increases productivity and safety by allowing the operator to look ahead at all times.


An option of carriage mounted pallet forks, available in various sizes, is a very cost effective way of manoeuvring pallets, IBC’s etc., from one area to another with very little hassle. Attach the pallet forks to the optional mast supplied in various lift heights and/or with side shift to make this a very effective all round attachment.

Telescopic forks are also available.






The Sprayer can be mounted or demounted from the Multihog within minutes.


The speci� cation is the same as the standard de-icing sprayer but incorporates 2 extra functions as follows:

A low pressure lance with 10m hose which enables the operator to spray de-icing � uid into extremely con� ned areas inaccessible to the Multihog base unit.

A high pressure 10m hose which allows the tank to be used to hold water for power spraying operations.

“OUR MULTIHOG FLEET MINIMISES DISRUPTION TO OPERATIONS AND ENSURES CLEAR WORKING CONDITIONS FOR AIRSIDE PERSONNEL IN THE EVENT OF BAD WEATHER. OUR LANDSIDE MULTIHOGS ALSO ENABLE US TO OFFER AN ENHANCED CUSTOMER SERVICE.”

—DAVID CHARMAN, AIRFIELD OPERATIONS SAFETY STANDARDS AND TRAINING MANAGER, GATWICK AIRPORT

PATCH PLANER

With our road planer attachment you can plane damaged surfaces to a width of 400mm and a depth of 125mm. This planer will save time as well as the cost of in� ll materials by accurately removing only what you need. This helps to produce a sound base for reinstatement and reduces transport and recycling costs by creating a re-usable material.

The ideal accompaniment to the Multihog’s attachment range to enable airport authorities to repair pot holes quickly and ef� ciently all year round.

GROUNDCARE AND FORESTRY

20 21

HEDGE CUTTER



FLAIL DECK MOWER



ROTARY MOWER

This 3.4m wide area rotary mower is excellent for increasing productivity in grass cutting operations. Covering large areas in a short space of time combined with different cutting lengths mean that a variety of tasks can be completed with this single attachment.

CYLINDER MOWER

This hydraulically operated 7 gang cylinder mower is used for a � ne � nish for applications such as golf courses and � ner park lands.

Each mower unit can be operated independently allowing operation in even the tightest of areas – this is complemented by the pivot steer of the Multihog MH90.

CHEMICAL SPRAYER

This universal 500Ltr capacity water unit is available with 4m and 6m spray arms. The arms fold conveniently for travel and the additional hoppers enable the use of individual chemical mixes and dilution rates required for each speci� c job.

This attachment also suits a variety of ‘pre-spraying’ operations using any dilution rate of salt water / brine solution. As with all Multihog attachments this unit can be mounted and demounted in minutes.

GROUNDCARE AND FORESTRY

22

WOOD CHIPPER


STUMP GRINDER

This heavy duty MM530XR stump grinder attachment offers unmatched performance, speed and operator comfort. The extending power arm covers a large working area of around 1.8m² so that once the machine is in position most jobs can be � nished without the need to move it, saving time and improving site safety. All functions are controlled from within the cab via the joystick, eliminating any risk of hand arm vibration. Using the Multihog’s power source delivers up to 53 HP and increased torque for quicker cutting operations. The cutting wheel is designed for easy maintenance and quick and straightforward teeth replacement. Standard � nger teeth can also be replaced with heavier duty green teeth if required.

BUCKET


23

252524

DISTRIBUTIONCENTRES




HEDGE CUTTER



FLAIL DECK MOWER



SNOW PLOUGH

Heavy duty hydraulic lift, tilt and angle snow plough with a 2400mm blade which can swivel 30 degrees to each side featuring nylon wear strip. The unique spring brake system enables trouble free snow clearance over hidden raised iron works and where concealed obstacles pose a potential problem. Compact dimensions of 2100mm when angled to 30 degrees allows easy access to hard to reach areas such as around parked vehicles and trailers.

SWEEPER

This 2300mm wide sweeper has a quick change adaptor complete with roller levelling system, hydraulic opening waste collector and a water spray system. The broom can be adjusted to sweep waste into a gulley or to be collected into the hopper.

The 200Ltr water spray system minimises dust while the hydraulic operating side brush allows the sweeping of areas with limited access.

DISTRIBUTIONCENTRES

26

GRITTER


The spreading width is adjustable from between 1 and 8 metres and the material quantity is adjustable from between 5g/m2 and 250g/m2. The compact design coupled to the Multihog allows access to the most restricted areas and around obstacles.

TOWING

The Multihog MH90 is capable of towing up to 3000kgs giving the option of carrying additional attachments, tools and materials from one part of the operation to the next.

This, coupled to an excellent road speed of 40km/h guarantees productive and pro� table operations.

Please let us know of any attachments not listed that would bene� t your business as we would be happy to consider these in future.

For further details please contact the Multihog sales team.

?

COMINGSOON…

BRUSH BUCKET

DIMENSIONS / WEIGHTS

Length 3400mm Wheel Base 1760mm Max Rear Axle Weight 4000kg

Width 1730mm – 1960mm Unladen Weight 3080kg Gross Train Weight 6000kg

Height 2400mm Max Front Axle Weight 3500kg Turning Radius 3000mm

ENGINE

Manufacturer Yanmar

Power 87.5HP / 61.7kW 3.3L

Emissions Tier 3 interim tier 4

POWER TRAIN

Drive 4 Wheel drive with 2 stage differential lock

Transmission 2 Speed heavy duty hydrostatic drive

Drive Controls Full automotive control for normal drive

Fixed engine speed variable travel speed when operating an implement

Parking Brake Automatic multidisc parking brake on rear wheels

STANDARD UK HYDRAULIC FUNCTIONS

Load Sensing PTO Hydraulics Fully adjustable Flow: 30 ltrs – 115 ltrs

Hydraulic Front PTO Flow: 115 ltrs Operating pressure: 220 bar

Rear PTO Hydraulics Flow : 115 ltrs Operating pressure: 220 bar

Front Hydraulic Functions 3 Double acting section Flow 30 ltrs

2 Single acting section Operating pressure: 220 bar

Rear Hydraulic Functions 2 Single acting section Flow 30 ltrs

3 Double acting section Operating pressure: 220 bar

STANDARD UK EQUIPMENT

Road Lights Radio / CD / Aux

LED Work Lights Tow bar and trailer socket

Flashing Beacons LED � ashing warning lights

Rear View Mirrors Multifunction joystick for hydraulic controls

Air Suspension Driver’s Seat Air conditioning

Adjustable Steering Column 12v electrical socket

TYRES AND STEERING

Steering Type

Tyres

Hydrostatic pivot power steering

Continental all ground

OPTIONAL EQUIPMENT

Corporate colour scheme

Reversing camera with in-cab colour monitor

Buddy seat, tow bar

Multihog have a policy of continuous improvement. These speci� cations may change without prior notice.

Attachments can be front and rear mounted – signi� cantly increasing year round versatility.

Same track pivot steer – increased manoeuvrability and reduced ground disturbance.

Fully road legal with a top road speed of 40km/h.

Fully enclosed cab including air suspension seat – maximum driver comfort, reduced driver fatigue.

360º visibility – increased safety whilst working in urban areas.

Quick release attachment mechanism – allows the operator to change the attachments in minutes eliminating the need for tools and manual handling.

Powerful hydraulics for driving heavy duty attachments – eradicating hand and arm vibration of hand held equipment.

Patented ‘Sure Drive’ 4-wheel drive system complete with 2 stage differential lock

www.multihog.co.uk

KEY MODEL FEATURES AND BENEFITSOne Machine, One Driver,Endless Applications.

Multihog UK Ltd – One Machine, One Driver, Endless Applications20 – 22 Queens Square, Hoddlesden, Darwen, Lancashire BB3 3NQTel: 01254 703 212 E: [email protected] W: www.multihog.co.uk

Documents

Multihog Brochure