IMPORTANT - THE BED MUST STAY SECURED TO THE WALL FOR STEPS 1 TO 5 - IMPORTANT

You can be killed or seriously injured if you don’t follow these instructions

TIP OVER HAZARD

#1

# 2

# 3

Step 2

Step 3 Step 4 Step 5 Step 6Step 1

Have a 2nd personhold the front panel in place

Ease the panel up and rotate the silver bracket over the top

nut on the mechanism to prevent the door from closing.

• Loosen the right bolt located in the #1 position.

• Loosen the bolt in the #3 position.

• Remove the bolt in the #2 position.

• Repeat on the left side.

Carefully slide the front panel upwards

respectingthe locked angle.This step requires

2 people.

Sit on the ground andbase your foot against the

front edge of the side panel.Use a PVC tube and pullthe arm towards you to free the silver blockingbracket. Ease the arm

back slowly.

DANGER: Beware of the strong tension on

the springs.

Open the bed and remove the mattress

Disassemble the bedcasement.

First remove it from thewall by unscrewing

the secured attachments.

Place the casementface down on the floor to

disassemble..

Note: Leave the mechanismon the side panels

HELP LINE

1-855-925-5233The door is very heavy,

do not put your feet under to support

Instructions for disassembling the Murphy Bed MechanismMURPHY BEDHARDWARE .c

om

MURPHY BEDHARDWARE .c

om