MWF & Lube Brochure

Lubricants & Metalworking Fluid AdditivesMay 2015 Edition

Tradename Primary Description CAS # Use/Benefit Base

Flu

id

Lubr

icity

Ant

iwea

r Add

itive

Emul

sifie

r

Chem

ical

Inte

rmed

iate

Form

@ 2

5°C

Solu

bilit

y in

Wat

er1

HLB

Clou

d Pt

., °C

(1%

aq.

)

Pour

Pt.

, °C

ERUCICAL H-102 High erucic acid rapeseed (HEAR) oil

8002-13-9 Higher molecular weight vegetable oil that offers improved lubricity compared to other vegetable oils.

• • •Yellow liquid

I -12

ERUCICAL H-107 Erucic acid 68002-87-9 Higher molecular weight fatty acid that compatibilizes formulations and adds lubricity.

• • Yellow liquid

I 11

LAMCHEM PE-108 K Phosphated mono- and diglycerides

Proprietary Food grade phosphorous-based AW/EP additive that imparts lubricity without leaving tacky, discolored residue.

•Opaque liquid

D 5-7

LAMCHEM PE-130 K Phosphated mono- and diglycerides

455943-22-3 Food grade, phosphorous-based EP additive that imparts lubricity without leaving tacky, discolored residue. NSF HX-1 Reg. #128723.

•Opaque liquid

I 3.0 -8

LUBEADD 1307 Amine phosphate Proprietary Low acid value antiwear additive.•

Amber liquid

I

LUMISORB SMO I Sorbitan monooelate 1338-43-8 Oil soluble emulsifier that provides lubricity and rust protection.• •

Amber liquid

I 4.3 -22

LUMULSE 1061-L EO/PO block copolymer 9003-11-6 Low HLB, low foaming w/o emulsifier used in cutting fluids, rinse aids and metal cleaning.

• • •Clear liquid

S 3.0 24 -30



S 7.0 32 -4

LUMULSE 2017-R EO/PO reverse block copolymer

9003-11-6 High cloud point, low foaming w/o emulsifier used as lubricity additive in machining applications.


S 8.0 35 -25




S 6.3 29 -5




S 7-12 46 10



I 4 15 -23

LUMULSE 40-L PEG 400 monolaurate 9004-81-3 Secondary emulsifier that provides emulsion stability.• •

Yellow liquid

S 12.8 32 12

LUMULSE 42- LV PEG 400 dilaurate 9005-02-01 Secondary emulsifier that provides emulsion stability.• •

Yellow liquid

D 9.7 29 18

LUMULSE 40-L V PEG 400 monolaurate 9004-81-3 Secondary emulsifier that provides emulsion stability.• •

Yellow liquid

D 12.8 68 12

LUMULSE 40-O I PEG 400 monooleate 9004-96-0 Secondary emulsifier that provides emulsion stability.• •

Yellow liquid

D 11.8 65 5

LUMULSE 40-O K PEG 400 monooleate 9004-96-0 Secondary emulsifier that provides emulsion stability.• •

Yellow liquid

D 11.8 5

LUMULSE CO-25 POE (25) castor oil 61791-12-6 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions.

• •Yellow liquid

S 10.8 5

LUMULSE CO-40 POE (40) castor oil 61791-12-6 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions.


S 13.0 82 14

LUMULSE CO-5 POE (5) castor oil 61791-12-6 Oil-soluble emulsifier used in wide pH ranges to stabilize emulsions.• •

Yellow liquid

I 4.0 -26

LUMULSE EST-300 High erucic acid rapeseed alkoxylate

253685-23-3 Low foaming, low misting, high HLB emulsifier that adds lubricity to ferrous and non-ferrous MWF formulations.


S 16.0 85 -5

LUMULSE EST-430 MPEG laurate 9006-27-3 Thermally stable monoester that acts as a secondary emulsifier and provides emulsion stability.


S 9.2

LUMULSE EST-500 LF Alkoxylated linear alcohol Proprietary Low foaming, low cloud point surfactant which offers excellent detergency, wetting and emulsification.

•Clear liquid

D 10.0 12 -9

LUMULSE EST-520 Alkoxylated lauryl alcohol 68238-81-3 Low foaming surfactant which offers excellent detergency, wetting and emulsification.

• •Clear liquid

D

LUMULSE EST-610 EO/PO block copolymer dioleate

67167-17-3 Low foaming surfactant that offers excellent lubrication on all metals while coupling formulations together.


D 5.0

LUMULSE GML K Glycerol monolaurate 61789-05-7 Oil-soluble emulsifier that provides lubricity and rust protection.• •

Yellow solid

I 5.2 26

Lubricants & Metalworking Fluid Additives

1 Solubility in Water: I = Insoluble S = Soluble D = Dispersible. * Cloud points were run on products “as-is”.

Typical properTies

Tradename Primary Description CAS # Use/Benefit Base

Flu

id

Lubr

icity

Ant

iwea

r Add

itive

Emul

sifie

r

Chem

ical

Inte

rmed

iate

Form

@ 2

5°C

Solu

bilit

y in

Wat

er1

HLB

Clou

d Pt

., °C

(1%

aq.

)

Pour

Pt.

, °C

LUMULSE GMO K Glycerol monooleate

37220-82-9 Oil-soluble emulsifier that provides lubricity and rust protection.• •

Yellow liquid

I 2.8 8

LUMULSE GMR K Glycerol monoricinoleate

1323-38-2 Oil-soluble emulsifier that provides lubricity and rust protection.• •

Viscous liquid

I 2.6 -21

LUMULSE GMT K Glycerol monotallate 61789-12-6 Oil-soluble emulsifier that provides lubricity and rust protection.• •

Amber liquid

I 2.8 -18

LUMULSE GMT-40 Glycerol monotallate 61789-12-6 Oil-soluble emulsifier that provides lubricity and rust protection.• •

Amber liquid

I 2.8 -18

LUMULSE HCO-16T POE (16) hydrogenated castor oil

61788-85-0 Water-soluble emulsifier used in wide pH ranges to stabilize emulsions. • •

Yellow liquid

S 9.1

LUMULSE HCO-25 POE (25) hydrogenated castor oil


Yellow liquid

S 10.8 88 5

LUMULSE HCO-40 POE (40) hydrogenated castor oil


Yellow liquid

S 14.0 100

LUMULSE MPEG 350 Polyethylene glycol 350 methyl ether

9004-74-4 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •

Clear liquid

S 19.3 3

LUMULSE MPEG 550 Polyethylene glycol 550 methyl ether

9004-74-4 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •

Clear liquid

S 19.5 20

LUMULSE PEG 200 Polyethylene glycol 200 25322-68-3 Low toxicity, water soluble and non-staining lubricant that can be used as an intermediate. • •

Clear liquid

S 20.0


Clear liquid

S 20.0 -11


Clear liquid

S 20.0 6


Clear liquid

S 20.0 20

OLEOCAL C-102 Canola oil 8002-13-9 Food grade, environmentally friendly base oil and lubricity additive for applications where the lubricant is used repeatedly for long periods of time. NSF HX-1 Reg. #128724.


I -18

OLEOCAL C-104 High oleic canola oil 120962-03-0 75% oleic vegetable oil for applications where low pour point and high oxidative stability are necessary.


I -15

OLEOCAL IVO-114 K Soybean oil 8001-22-7 Environmentally friendly base oil and lubricity additive for applications where the lubricant is not used repeatedly.


I -7

OLEOCAL ME-112 Methyl canolate 67762-38-3 Low viscosity lubricity additive and chemical intermediate. Base fluid in environmentally friendly solvents and cleaning products.


I -5* -15

OLEOCAL ME-130 Methyl soyate 67784-80-9 Low viscosity lubricity additive and chemical intermediate. Base fluid in environmentally friendly solvents and cleaning products.


I -2* -6

OLEOCAL ME-70 V Methyl oleate 67762-26-9 Low viscosity lubricity additive and chemical intermediate.• •

Yellow liquid

I 11* 7

POLYCAL 1265 Proprietary ester blend Proprietary Food grade, high temperature stability and non-staining to alumi-num during machining operations. NSF HX-1 Reg. #136557.

• •Clear liquid

I 5

POLYCAL PGI-285 Polyalkylene glycol, water insoluble

9003-13-8 Base fluid for high performance lubricants.•

Clear liquid

I

POLYCAL PGS-260 Polyalkylene glycol, water soluble


Clear liquid

S



Clear liquid

S



Clear liquid

S

POLYCAL TMP 18-1 TMP trioleate 68002-79-9 Environmentally friendly base oil and lubricity additive for applica-tions where the lubricant is used repeatedly for long periods of time.

• •Amber liquid

I -42

Lubricants & Metalworking Fluid AdditivesTypical properTies

Vantage Specialty Chemicals, Inc.3938 Porett Drive

Gurnee, Illinois 60038 USAT +1 847 244 3410 or +1 800 432 7187

F +1 847 249 6792www.vantagegrp.com

ERUCICAL, OLEOCAL and POLYCAL are registered trademarks of VantageLUMULSE, LUMISORB and LAMCHEM are trademarks of Vantage

Documents

MWF & Lube Brochure