Upload
ronbryant
View
856
Download
3
Embed Size (px)
DESCRIPTION
Repair
Citation preview
7/14/2019 MX_2301N_2600N_3100_S3E
1/466
SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notSHARP CORPORATION
NOTE FOR SERVICING
[1] PRODUCT OUTLINE . . . . . . . . . . . .1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . .2-1
[3] CONSUMABLE PARTS . . . . . . . . . . 3-1
[4] UNPACKING AND INSTALLATION
For unpacking and installation,
refer to the installation manual
(00ZMX3100/I3E)
[5] EXTERNAL VIEW AND INTERNAL
STRUCTURE . . . . . . . . . . . . . . . . . . 5-1
[6] ADJUSTMENTS . . . . . . . . . . . . . . . .6-1
[7] SIMULATION . . . . . . . . . . . . . . . . . .7-1
[8] SELF DIAG AND TROUBLE CODE. 8-1
[9] MAINTENANCE . . . . . . . . . . . . . . . . 9-1
[10] FIRMWARE UPDATE. . . . . . . . . . .10-1
[11] ELECTRICAL SECTION. . . . . . . . . 11-1
[12] OTHERS. . . . . . . . . . . . . . . . . . . . . 12-1
DETAILS OF EACH SECTION
[A] EXTERNAL OUTFIT. . . . . . . . . . . . .A-1
[B] OPERATION PANEL . . . . . . . . . . . .B-1
[C] RSPF SECTION . . . . . . . . . . . . . . . C-1
[D] SCANNER SECTION . . . . . . . . . . . D-1
[E] PAPER FEED SECTION . . . . . . . . .E-1
[F] PAPER TRANSPORT SECTION . . .F-1
[G] LSU SECTION . . . . . . . . . . . . . . . . G-1
[H] PHOTOCONDUCTOR SECTION. . H-1
[ i ] TONER SUPPLY SECTION . . . . . . . i -1
[J] DEVELOPING SECTION . . . . . . . . . J-1
[K] TRANSFER SECTION . . . . . . . . . . .K-1
[L] FUSER SECTION. . . . . . . . . . . . . . . L-1
[M] DUPLEX/PAPER EXIT SECTION. . M-1
[N] DRIVE SECTION . . . . . . . . . . . . . . N-1
[O] PWB SECTION. . . . . . . . . . . . . . . . O-1
[P] FAN SECTION . . . . . . . . . . . . . . . . .P-1
[Q] SENSOR/SWITCH SECTION . . . . Q-1
2
CODE: 00ZMX3100/S3E
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
MODEL
MX-2301NMX-2600N/3100NMX-2600G/3100G
2
CONTENTS
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
2/466
CONTENTS
NOTE FOR SERVICING1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . .i
2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
3. Note for installing site . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
[1] PRODUCT OUTLINE
1. Article constitution (Main unit and option). . . . . .. . . . . . 1 - 12. Main function of the main unit. . . . . . . . . . . . . . .. . . . . . 1 - 2
3. Combination of options. . . . . . . . . . . . . . . . . . . .. . . . . . 1 - 2
[2] SPECIFICATIONS
1. Basic specifications . . . . . . . . . . . . . . . . . . . . . .. . . . . . 2 - 1
[3] CONSUMABLE PARTS
1. Supply system table . . . . . . . . . . . . . . . . . . . . . .. . . . . . 3 - 1
2. Maintenance parts list. . . . . . . . . . . . . . . . . . . . .. . . . . . 3 - 3
3. Definition the developer/drum life end . . . . . . . .. . . . . . 3 - 6
4. Production number identification . . . . . . . . . . . .. . . . . . 3 - 6
[4] UNPACKING AND INSTALLATION
* For unpacking and installation, refer to the installation man-
ual (00ZMX3100/I3E).
[5] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Identification of each section and functions . . . .. . . . . . 5 - 1[6] ADJUSTMENTS
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 6 - 1
2. Adjustment item list. . . . . . . . . . . . . . . . . . . . . . .. . . . . . 6 - 1
3. Details of adjustment . . . . . . . . . . . . . . . . . . . . .. . . . . . 6 - 3
[7] SIMULATION
1. General (Including basic operations) . . . . . . . . .. . . . . . 7 - 1
2. List of simulation codes . . . . . . . . . . . . . . . . . . .. . . . . . 7 - 3
3. Details of simulation . . . . . . . . . . . . . . . . . . . . . .. . . . . . 7 - 8
[8] SELF DIAG AND TROUBLE CODE
1. Self diag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 8 - 1
2. Trouble code list . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 8 - 4
3. Details of trouble code . . . . . . . . . . . . . . . . . . . .. . . . . . 8 - 7
[9] MAINTENANCE
1. Maintenance list . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 9 - 12. Details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 9 - 4
3. Other related items . . . . . . . . . . . . . . . . . . . . . . .. . . . . .9 -36
[10] FIRMWARE UPDATE
1. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 10- 1
2. Update procedure. . . . . . . . . . . . . . . . . . . . . . . .. . . . . 10- 1
[11] ELECTRICAL SECTION
1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 11 - 1
2. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . .. . . . . 11 - 11
3. Signal list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 11 -35
[12] OTHERS
1. System settings . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 12- 1
2. Paper JAM code . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 12- 5
3. Necessary works when replacing thePWB and the HDD . . . . . . . . . . . . . . . . . . . . . . .. . . . . 12- 7
DETAILS OF EACH SECTION
[A] EXTERNAL OUTFIT
1. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . A - 1
[B] OPERATION PANEL
1. Electrical and mechanism relation diagram. . . .. . . . . B - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . B - 43. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . B - 4
[C] RSPF SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . C - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . C - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . C - 8
[D] SCANNER SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . D - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . D - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . D - 3
[E] PAPER FEED SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . E - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . E - 4
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . E - 5
[F] PAPER TRANSPORT SECTION1. Electrical and mechanism relation diagram. . . .. . . . . F - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . F - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . F - 2
[G] LSU SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . G - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . G - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . G - 3
[H] PHOTOCONDUCTOR SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . H - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . H - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . H - 3
[i] TONER SUPPLY SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . .i - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . .i - 23. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . .i - 2
[J] DEVELOPING SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . J - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . J - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . J - 2
[K] TRANSFER SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . K - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . K - 3
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . K - 4
[L] FUSER SECTION
1. Electrical and mechanism relation diagram. . . .. . . . . L - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . L - 2
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . L - 3
[M] DUPLEX/PAPER EXIT SECTION1. Electrical and mechanism relation diagram. . . .. . . . . M - 1
2. Operational descriptions . . . . . . . . . . . . . . . . . .. . . . . M - 3
3. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . M - 3
[N] DRIVE SECTION
1. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . N - 1
[O] PWB SECTION
1. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . O - 1
[P] FAN SECTION
1. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . P - 1
[Q] SENSOR/SWITCH SECTION
1. Disassembly and assembly. . . . . . . . . . . . . . . .. . . . . Q - 1
2
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
3/466MX-3100N NOTE FOR SERVICING - i
MX-3100N Service ManualNOTE FOR SERVICING
This Service Manual uses some symbols to assure safe operation.
Please understand the meanings of photographs before servicing.
1. Precautions for servicing
1) When servicing, disconnect the power plug, the printer cable,
the network cable, and the telephone line from the machine,
except when performing the communication test, etc.
It may cause an injury or an electric shock.
2) There is a high temperature area inside the machine. Useextreme care when servicing.
It may cause a burn.
3) There is a high voltage section inside the machine which may
cause an electric shock. Be careful when servicing.
4) Do not disassemble the laser unit. Do not insert a reflective
material such as a screwdriver in the laser beam path.
It may damage eyes by reflection of laser beams.
5) When servicing with the machine operating, be careful not to
pinch your hands by the chain, the belt, the gear, and other
driving sections.
6) Do not leave the machine with the cabinet disassembled.
Do not allow any person other than a serviceman to touch
inside the machine. It may cause an electric shock, a burn, or
an injury.7) When servicing, do not breathe toner, developer, and ink
excessively. Do not get them in the eyes.
If toner, developer, or ink enters your eyes, wash it away with
water immediately, and consult a doctor if necessary.
Alternatively, follow the instruction of the MSDS
8) The machine has got sharp edges inside. Be careful not to
damage fingers when servicing.
9) Do not throw toner or a toner cartridge in a fire. Otherwise,
toner may pop and burn you.
10) When replacing the lithium battery of the PWB, use a specified
one only.
If a battery of different specification is used, it may be broken,
causing breakdown or malfunction of the machine.
11) When carrying a unit with PWB or electronic parts installed toit, be sure to put it in an anti-static-electricity bag.
It may cause a breakdown or malfunctions.
2. Warning for servicing
1) Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Avoid complex wiring, which may lead to a fire or an electric
shock.
It may cause a fire or an electric shock.
2) If there is any abnormality such as a smoke or an abnormal
smell, interrupt the job and disconnect the power plug.
It may cause a fire or an electric shock.
3) Be sure to connect the grounding wire. If an electric leakageoccurs without grounding, a fire or an electric shock may
result.
To protect the machine and the power unit from lightening,
grounding must be made.
4) When connecting the grounding wire, never connect it to the
following points.
It may cause an explosion, a fire or an electric shock.
Gas tube
Lightning conductor
A water pipe or a water faucet, which is not recognized as a
grounding object by the authorities.
Grounding wire for telephone line
5) Do not damage, break, or work the power cord.
Do not put heavy objects on the power cable. Do not bend it
forcibly or do not pull it extremely.
It may cause a fire or an electric shock.
6) Keep the power cable away from a heat source.
Do not insert the power plug with dust on it into a power outlet.
It may cause a fire or an electric shock.
7) Do not put a receptacle with water in it or a metal piece which
may drop inside the machine.
It may cause a fire or an electric shock.
8) With wet or oily hands, do not touch the power plug, do notinsert the telephone line jack, do not operate the machine, or
do not perform servicing.
It may cause an electric shock.
3. Note for installing site
Do not install the machine at the following sites.
1) Place of high temperature, high humidity, low tempera-
ture, low humidity, place under an extreme change in tem-
perature and humidity.
Paper may get damp and form dews inside the machine, caus-
ing paper jam or copy dirt.
For operating and storing conditions, refer to the specifications
described later.
2) Place of much vibrations
It may cause a breakdown.
3) Poorly ventilated place
An electro-static type copier will produce ozone inside it.
The quantity of ozone produced is designed to a low level so
as not to affect human bodies. However, continuous use of
such a machine may produce an odor of ozone. Install the
machine in a well ventilated place, and ventilate occasionally.
7/14/2019 MX_2301N_2600N_3100_S3E
4/466MX-3100N NOTE FOR SERVICING - ii
4) Place of direct sunlight.
Plastic parts and ink may be deformed, discolored, or may
undergo qualitative change.
It may cause a breakdown or copy dirt.
5) Place which is full of organic gases such as ammonium
The organic photoconductor (OPC) drum used in the machine
may undergo qualitative change due to organic gases such as
ammonium.
Installation of this machine near a diazo-type copier may result
in dirt copy.
6) Place of much dust
When dusts enter the machine, it may cause a breakdown or
copy dirt.
7) Place near a wall
Some machine require intake and exhaust of air.
If intake and exhaust of air are not properly performed, copy
dirt or a breakdown may be resulted.
8) Unstable or slant surface
If the machine drops or fall down, it may cause an injury or a
breakdown.
If there are optional paper desk and the copier desk specified,
it is recommendable to use them.
When using the optional desk, be sure to fix the adjuster and
lock the casters.
30cm
30cm 45cm
7/14/2019 MX_2301N_2600N_3100_S3E
5/466MX-3100N PRODUCT OUTLINE 1 1
MX-3100N Service Manual[1] PRODUCT OUTLINE
1. Article constitution (Main unit and option)
Paper exit system Document feeder system
Printer expansion
Memory
Authentication/Security Application/Solution
Image send expansion
Paper feed system
DIGITAL FULLCOLORMULTIFUNCTIONAL SYSTEM
MX-SCX112
FINISHER
MX-FNX97
LARGE CAPACITY TRAY
MX-LCX15
STAND/2 x 500 SHEET
PAPER DRAWER
MX-DEX74
PUNCH MODULE
STAPLE CARTRIDGE
MX-SCX112
STAPLE CARTRIDGE
STAPLE CA
(For saddle)
RTRIDGE
MX-PNX1A/B/C/D
10
AR-SC313
PUNCH MODULE
MX-PNX5A/B/C/D
11
PRINTER
EXPANSION KIT
MX-PBX314
EXPANSION
MEMORY BOARD
MX-SMX334
PS3 EXPANSION KIT
MX-PKX115
STAMP UNIT
AR-SU119
STAMP CARTRIDGE
AR-SV120
INTERNET FAX
EXPANSION KIT
MX-FWX121
NETWORK SCANNER
EXPANSION KIT
MX-NSX122
APPLICATION
INTEGRATION MODULE
MX-AMX123
XPS EXPANSION KIT
MX-PUX116
BARCODE FONT KIT
AR-PF117
DATA SECURITY KIT
MX-FR10U24
DATA SECURITY KIT
MX-FR1025
SHARPDESK
5 LICENSE KIT
MX-USX527
KEYBOARD
MX-KBX133
APPLICATION
COMMUNICATION MODULE
MX-AMX231
EXTERNAL
ACCOUNT MODULE
MX-AMX332
SADDLE STITCH
FINISHER
MX-FN109
PAPER PASS UNIT
MX-RBX38
REVERSING
SINGLE PASS FEEDER
MX-RPX21
DOCUMENT COVER
MX-VRX12
FACSIMILE
EXPANSION KIT
MX-FXX218
EXIT TRAY UNIT
MX-TRX16
SHARPDESK
1 LICENSE KIT
MX-USX126
SHARPDESK
10 LICENSE KIT
MX-US1028
SHARPDESK
50 LICENSE KIT
MX-US5029
SHARPDESK
100 LICENSE KIT
MX-USA030
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
STAND/1 x 500 SHEET
PAPER DRAWER
MX-DEX63
MX-2301N/2600N/3100N
MX-2600G/3100G
2
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
6/466MX-3100N PRODUCT OUTLINE 1 2
2. Main function of the main unit
STD: Standard provision. OPT: Option
OPT*1: Product key target. When PS is used, PCL function must be available.
OPT*2: Product key target.
OPT*3: When expansion for PCL printer, GDI printer is not available.
3. Combination of options
STD: Standard provision. {: Installable. ---: Cannot be connected.
* 1: Printer expansion (PCL) is required.
* 2: No support for some destinations.
* 3: Standard for North America and some destinations, option for the other destinations.
* 4: Memory expansion are required.
MX-2301N MX-2600N/3100N MX-2600G/3100G
Copier STD STD
GDI printer --- --- STD
PCL printer STD STD OPT*3
PS printer OPT*1 OPT*1
Main body LCD MONOCHROME HVGA 8.1" COLOR WVGA 8.5" MONOCHROME HVGA 8.1"
FAX OPT OPT
Scanner STD STD OPT
Filing STD STD
HDD STD STDRSPF STD STD OPT
Automatic duplex STD STD
Security --- OPT*2
Internet Fax OPT OPT
Section NameModel
name
MX-2301NMX-2600N/
3100N
MX-2600G/
3100G
Product
key target
Remarks
Document
feeder system
1 REVERSING SINGLE PASS FEEDER MX-RPX2 STD STD {
2 DOCUMENT COVER MX-VRX1 --- --- {
Paper feed
system
3 STAND/1 x 500 SHEET PAPER DRAWER MX-DEX6 { { {
4 STAND/2 x 500 SHEET PAPER DRAWER MX-DEX7 { { {
5 LARGE CAPACITY TRAY MX-LCX1 --- { { A4
Paper exit
system
6 EXIT TRAY UNIT MX-TRX1 { { {
7 FINISHER MX-FNX9 { { { Inner finisher
8 PAPER PASS UNIT MX-RBX3 --- { {
9 SADDLE STITCH FINISHER MX-FN10 --- { {
10 PUNCH MODULE MX-PNX1
A/B/C/D
{ { { For inner finisher
11 PUNCH MODULE MX-PNX5
A/B/C/D
--- { { For saddle stitch
finisher
12 STAPLE CARTRIDGE MX-SCX1 --- { { For finisher
13 STAPLE CARTRIDGE AR-SC3 --- { { For saddle
Printer
expansion
14 PRINTER EXPANSION KIT MX-PBX3 STD STD { {
15 PS3 EXPANSION KIT MX-PKX1 { { {*1 {
16 XPS EXPANSION KIT MX-PUX1 --- {*4 {*1, *4 {
17 BARCODE FONT KIT AR-PF1 { { {
Image send
expansion
18 FACSIMILE EXPANSION KIT MX-FXX2 { {*2 {*2
19 STAMP UNIT AR-SU1 --- { {
20 STAMP CARTRIDGE AR-SV1 --- { {
21 INTERNET FAX EXPANSION KIT MX-FWX1 { { { {
22 NETWORK SCANNER EXPANSION KIT MX-NSX1 STD STD { { Includes the
Sharpdesk.
23 APPLICATION INTEGRATION MODULE MX-AMX1 { { { {
Authentication/
Security
24 DATA SECURITY KIT MX-FR10U --- { { { Commercial version
25 DATA SECURITY KIT MX-FR10 --- { { { Authentication
version
Application/
Solution
26 SHARPDESK 1 LICENSE KIT MX-USX1 { { {
27 SHARPDESK 5 LICENSE KIT MX-USX5 { { {28 SHARPDESK 10 LICENSE KIT MX-US10 { { {
29 SHARPDESK 50 LICENSE KIT MX-US50 { { {
30 SHARPDESK 100 LICENSE KIT MX-USA0 { { {
31 APPLICATION COMMUNICATION
MODULE
MX-AMX2 { { { {
32 EXTERNAL ACCOUNT MODULE MX-AMX3 { { { {
33 KEYBOARD MX-KBX1 --- STD/{*3 ---
Memory 34 EXPANSION MEMORY BOARD MX-SMX3 --- { { 1GB
22
2
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
7/466MX-3100N SPECIFICATIONS 2 1
: '09/Sep2
MX-3100N Service Manual[2] SPECIFICATIONS
1. Basic specifications
A. Base engine
(1) Type
(2) Engine composition
(3) Dimensions / Weight
(4) Warmup
* Condition: After the door is kept open for 60 seconds, the poly-
gon motor halt.
(5) First copy time
* Measurement conditions: When paper of A4/8.5 x 11 is fed to
narrow side direction from the main unit tray 1, and the polygon
motor is rotating.
(6) Engine resolution
(7) Printable area
Full A3 / 11 X 17 dimension (299 x 450 mm) can be printed with
PCL / PS driver.
(8) Engine speed (ppm)
a. Tray (1-4, LCC) paper feeding
* LCC is not allowed the heavy paper passing.
Type Desktop
Photoconductor kind OPC (Drum diameter:30mm)Black x1, Color x 3
Copying method Electronic photo (Laser)
Deve loping system Dry, 2-component magnetic brush
development
Charging system Charged saw-tooth method
Transfer system Primary transfer belt
Cleaning system Counter blade
Fusing system Heat roller
Waste toner disposal No toner recycling system / Waste toner
bottle system
Outer dimensions
(W x D x H)
MX-2301N/2600G/3100G:
620 x 670 x 795 mm
MX-2600N/3100N: 620 x 695 x 950 mm
Dimensions occupied by
Machine (W x D)
(State of the manual paper
feed tray is expansion.)
MX-2301N/2600G/3100G: 970 x 670 mm
MX-2600N/3100N: 970 x 695 mm
Weight
(Including OPC drum/
excluding consumble parts)
MX-2301N/2600G/3100G: Approx. 102 kg
MX-2600N/3100N: Approx. 112 kg
2
2
2
Warm-up time 60 seconds or less (The value may be
increased by operating condition)
Pre-heat Yes
recovery t ime from jam * 30 sec. or less
Platen/RSPF Monochrome Color
Platen 6.0 sec. or less 8.9 sec. or less
RSPF 10.7 sec. or less 13.5 sec. or less
Writing resolution Copy: 6 00 x 600dpi
Print: 1200 x 1200dpi (26/31 ppm model)
/ 600 x 600 dpi (23 ppm model)
Smoothing No
Gradation
(Monochrome/Color)
Copy: 600 x 600dpi
Print : 600 x 600 (1bit)
/ 600 x 600 (4bit)
/ 1200 x 1200 (1bit) (Except 23 ppm model)
Max. print size 299 x 450 mm
Void area Image loss Lead edge: 4mm or less
Rear edge: 2 mm or more, and 5 mm or less
Total of the lead edge and the rear edge:
8mm or less
2
2
Paper type Paper size23-sheets model 26-sheets model 31-sheets model
Monochrome Color Monochrome Color Monochrome Color Standard paper A3 12 12 13 13 14 14
B4 14 14 15 15 17 17
A423 23 26 26 31 31
B5
A4R
16 16 18 18 20 20B5R
A5R
Extra 11 11 12 12 13 13
11 x 17 12 12 13 13 14 14
8.5 x 14
14 14 15 15 17 178.5 x 13
8.5 x 13.4
8.5 x 13.5
8.5 x 11 23 23 26 26 31 31
8.5 x 11R16 16 18 18 20 207.25 x 10.5R
5.5 x 8.5R
Heavy paper A4
12 12 12 12 12 12
B5
A5R
8.5 x 11
8.5 x 5.5R
A4R
9 9 9 9 9 9B5R
8.5 x 11R
7.25 x 10.5R
In the other sizes 7 7 7 7 7 7
2
7/14/2019 MX_2301N_2600N_3100_S3E
8/466MX-3100N SPECIFICATIONS 2 2
b. Manual paper feed tray paper feeding
*1: Engine speed in finisher output
(9) Power source
(10) Power consumption
*1: When the power supply is turned on, when the dehumidification
heater is OFF.
B. Controller board
(1) Controller board
(2) Memory, hard disk
Memory capacity, HDD capacity
* Capacity depends on procurement and sourcing status.
Paper type Paper size23-sheets model 26-sheets model 31-sheets model
Monochrome Color Monochrome Color Monochrome Color
Standard paper A3W *1 11 11 12 11 13 11
A3 12 12 13 12 14 12
B4 14 14 15 14 16 14
A423
2223
2223
22
B5 23 23 23
A4R
16 16 18
1619
16
B5R 17 17
A5R 18 20 20
Extra11 11 12 11 13 11
12 x 18 *1
11 x 17 12 12 13 12 14 12
8.5 x 14
14 14 15 14 16 148.5 x 13
8.5 x 13.4
8.5 x 13.5
8.5 x 11 23 22 23 22 23 22
8.5 x 11R
16 16 18
1619
16
7.25 x 10.5R 17 17
5.5 x 8.5R 18 20 20
OHP A4, 8.5 x 11 12 10 12 10 12 10
A4R, 8.5 x 11R 9 7 9 7 9 7
Envelope Monarch,
Com-10, DL, C58 7 8 7 8 7
Heavy paper A4
12 10 12 10 12 10
B5
A5R
8.5 x 11
8.5 x 5.5R
A4R
9 7 9 7 9 7B5R
8.5 x 11R
7.25 x 10.5R
In the other sizes 7 5 7 5 7 5
2
100V series 200V series
Voltage / Current 100 - 127V 12A 220 - 240V 8AFrequency 50/60Hz
Power source code Fixed type
(Direct connection)
Inlet
Power switch 2 switches
(Primary switch: in the front cover;
Secondary switch: the operation panel)
100V series 200V series
Max. Rated Power
Consumption *1
1.44Kw 1.84Kw
CPU Power QUICCIII-MPC8533E (800MHz)
Interface
IEEE 1284 Parallel No
Ethernet 1 port
Interface 10Base-T , 100Base-TX,
1000Base-T
Support
Protocol
TCP/IP (IPv4 IPv6), IPX/
SPX , NetBEUI , EtherTalk
USB 2.0 1 port
(Either on the front section or rear section)
For connection of USB memory, USB
keyboard, IC card reader, IC reader writer
or USB hab
USB authentication
acquisition
No
Serial I/F 1 port
Memory expansion slot 1 slot
Local Memory (Copy) Standard
Memory
1GB
System Memory (Print) Standard
Memory
512MB
Expansion
Memory
1GB (Except 23 ppm model)
Max. 1.5GB
HDD 80GB *
2
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
9/466MX-3100N SPECIFICATIONS 2 3
: '09/Sep2
C. Operation panel
(1) Display device
a. Monochrome LCD (MX-2301N/2600G/3100G)
b. Color LCD (MX-2600N/3100N)
D. Scanner section
(1) Resolution/Gradation
(2) Document table
(3) Automatic document feeder
Type Dot matrix STN LCD, touch panel
Size 8.1 inch
Display dot number 640 x 240 dots (H-VGA)
LCD drive display area 192 x 72 mm
LCD backlight Fluorescent lamp backlight system
LCD contrast adjustment Yes
Type Dot matrix TFT LCD, touch panel
Size 8.5 inch
Display dot number 800 x 480 (W-VGA)
LCD drive display area 184.8 x 110.88mm
LCD backlight Fluorescent lamp backlight system
LCD contrast adjustment Yes
2Scanning
Resolution
(dpi)
copy mode
Platen Mono-
chrome
600 x 300 dpi (Default)
600 x 400 dpi
600 x 600 dpi
Color 600 x 600dpi
RSPF Mono-
chrome
600 x 400 dpi (Default)
600 x 600 dpi
Color 600 x 600dpi
In sending
Resolution
(dpi)
ScannerInternet Fax /
Direct SMTP Fax
100dpi x 100dpi
200dpi x 100dpi
(middle tone not
allowed)
Standard
(203.2 x 97.8 dpi)
(middle tone not
allowed)
200dpi x 200dpi 200dpi x 200dpiFine
(203.2 x 195.6 dpi)
300dpi x 300dpi 200dpi x 400dpiSuper Fine
(203.2 x 391 dpi)
400dpi x 400dpi 400dpi x 400dpiUltra Fine
(406.4 x 391 dpi)
600dpi x 600dpi 600dpi x 600dpi ---
Exposure lamp Xenon
Reading
gradation
10bits
Output
gradation
B/W: 1bit
Gray scale: 8bit
Full color: RGB colors are 8bit each
Type Document table fixed system (Flat bed)
Scanning area 297 x 432mm
Original standard position Left bottom reference
Detection Yes
detection size Automatic detection
Platen
Inch-1 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5
Inch-2 11 x 17, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5
Inch-3 11 x 17, 8.5 x 13.4, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5
AB-1 A3, B4, A4, A4R, B5, B5R, A5
AB-2 A3, A4, A4R, B5, B5R, A5, 8.5 x 13AB-3 8K, 16K, 16KR, A3, B4, A4, A4R, A5
AB-4 A3, A4, A4R, B5, B5R, A5, 8.5 x 13.4
AB-5 A3, A4, A4R, B5, B5R, A5, 8.5 x 13.5
Dehumidifying heater
(Scanner section)
Supplied as a service part
DKIT-0373FCZZ
Type RSPF (Reversing single pass feeder)
Scan speed
Monochrome (A4 / 8.5 x 11) Color (A4 / 8.5 x 11)
Copy Single: 50-sheet/min. (600 x 400 dpi, 1bit)
36-sheet/min. (600 x 600 dpi, 1 bit)
Duplex: 16-page/min. (600 x 400 dpi, 1bit)
14-page/min. (600 x 600 dpi, 1bit)
Single: 36-sheet/min. (600 x 600 dpi, 4 bit)
Duplex: 14-page/min. (600 x 600 dpi, 4 bit)
FAX / Internet FAX Single: 50-sheet/min. (200 x 200 dpi, 1 bit)Duplex: 16-page/min. (200 x 200 dpi, 1 bit)
N/A
Scanner Single: 50-sheet/min. (200 x 200 dpi, 1 bit)
Duplex: 16-page/min. (200 x 200 dpi, 1 bit)
Single: 50-sheet/min. (200 x 200 dpi, 8 bit)
Duplex: 16-page/min. (200 x 200 dpi, 8 bit)
Detection Yes
Paper detection size Auto detection (Switching one type of detection unit)
RSPF
Inch-1 11 x 17, 8.5 x 14, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5, A3, A4
Inch-2 11 x 17, 8.5 x 13, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5, A3, A4
Inch-3 11 x 17, 8.5 x 13.4, 8.5 x 11, 8.5 x 11R, 5.5 x 8.5, A3, A4
AB-1 A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8.5 x 14, 8.5 x 11
AB-2 A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8.5 x 13, 8.5 x 11
AB-3 8K, 16K, 16KR, A3, B4, A4, A4R, A5, 11 x 17, 8.5 x 13, 8.5 x 11
AB-4 A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8.5 x 13.4, 8.5 x 11
AB-5 A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8.5 x 13.5, 8.5 x 11
7/14/2019 MX_2301N_2600N_3100_S3E
10/466MX-3100N SPECIFICATIONS 2 4
E. Paper feed section
(1) Type
(2) Tray 1, 2 (Main unit)
(3) Manual paper feed tray (main unit)
(4) Tray 3, 4 (2-stage paper feed tray)
(5) Tray 5 (LCC)
Original standard
position
Center standard (Rear one-side standard for random feeding)
Document size Standard size (Refer to the "paper detection size")
Long paper: 1000 mm (Monochrome binary only)
Internet FAX 600 x 600 dpi: Max. 800 mm. When scan 400 dpi or more, long paper is not available.
Mix paper feed (Same series, same width paper) enabled
Random paper feed
(The following two kinds of sizes can be combined; A3 and B4, B4 and A4R, B5 and A5, 11" and 8.5". AMS is available.)
* In random paper feeding, scanning with duplex is not available.
Original copy weight Single: (Thin paper) 9 - 13 lb bond (35 - 49 g/m2), (plain paper) 13 - 32 lb bond (50 - 128 g/m2)
Duplex: 13 - 28 lb bond (50 - 105 g/m2)
Max. loading capacity of
documents
Max. 100 sheet (21 lbs Bond, 80g/m2) or 13 mm (height limitation)
Transport disable
document
OHP, second original paper, tracing paper, carbon paper, thermal paper, paper with wrinkles, folds, or breakage, pasted paper, cutout
document, document printed with ink ribbon, documents with perforation other than 2- or 3-holes (Perforated document by punch unit
is allowed.)
Finish stamp Option
Type Standard:
2-stage paper feed tray + multi manual paper
feed tray
Full option:
4-stage paper feed tray + multi manual paper
feed + LCC
Paper type setting Yes
Dehumidifying heater Service parts (Supported by kit)
Paper capacity Plain paper: 500 sheets (80 g/m2)
Paper size A3, B4, A4, A4R, B5, B5R, A5R, 11 x 17,
8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 8.5 x 13,
8.5 x 11, 8.5 x 11R, 7.25 x 10.5R, 5.5 x 8.5R
Paper type Plain paper, re-printed paper, recycled paper,
letter head, pre-punched paper, colored paper,
heavy paper
Feedable Paper Weight Plain paper: 16 - 28 lb bond (60 - 105g/m2)
Heavy paper: 28 - 110 lb bond (106 - 209g/m2)
Paper size setting when
shipping
AB series; Tray 1: A4, Tray 2: A3
Inch series; Tray 1: 8.5 x 11, Tray 2: 11 x 17
Paper remaining
detection
Yes (Paper empty and 3 levels)
Paper capacity Plain paper: 100 sheets (80 g/m2)
envelope/OHP: 20 sheets
Tab paper, Gross paper: 20 sheets
Heavy paper: 40 sheets
Paper size A3W, A3, B4, A4, A4R, B5, B5R, A5R,
11 x 17, 8.5 x 14 , 8.5 x 13.5, 8.5 x 13.4,
8.5 x 13, 8.5 x 11, 8.5 x 11R, 7.25 x 10.5R,
5.5 x 8.5R, 12 x 18, envelope
Paper type Plain paper, re-printed paper, recycled paper,
letter head, pre-punched paper, colored paper,
heavy paper, Thin paper, envelop, OHP,
Label paper, Tab paper, Gross paper
Feedable Paper Weight Thin paper:
13 lb bond - 16 lb bond (55 - 59g/m2)
Plain paper:
16 lb bond - 28 lb bond (60 - 105g/m2)
Heavy paper:
28 lb bond - 110 lb index (106 - 209g/m2),
110 lb index - 140 lb index (210 - 256g/m2)
2
2
2
Paper capacity Plain paper: 500 sheets (80 g/m2) x 2
Paper size A3, B4, A4, A4R, B5, B5R, 11 x 17, 8.5 x 14,
8.5 x 13.5, 8.5 x 13.4, 8.5 x 13, 8.5 x 11,
8.5 x 11 R, 7.25 x 10.5R
Paper type Plain paper, re-printed paper, recycled paper,
letter head, pre-punched paper, colored paper,
heavy paper
Feedable Paper Weight Plain paper:16 lb bond - 28 lb bond (60 - 105g/m2)
Heavy paper:
28 lb bond - 110 lb index (106 - 209g/m2)
Paper size setting when
shipping
Maximum position of paper guide width
Paper remaining
detection
Yes (Paper empty and 3 levels)
Power consumption 20W (Power is supplied from main unit)
Dimensions
(W x D x H)
with adjuster 720 x 670 x 303 mm
without adjuster 590 x 670 x 303 mm
Type 3,500-Sheet Large Capacity Tray
Transport speed 124 mm/s - 360 mm/s
Paper size A4, B5, 8.5" x 11"Paper size set ting Simulation setup
Paper size setting when
shipping
A4
Paper type setting Yes
Allowable paper type
and weight for paper
feed
Plain paper, re-printed paper, recycled paper,
letter head, pre-punched paper, colored paper:
16 - 28 lb bond (60 - 105g/m2)
Paper capacity 3,500 sheets (80 g/m2)
Effective height: 385 mm
Paper remaining
detection
Yes (5 levels: 100%, 75%, 50%, 25%, none)
Driving form The transport motor (DC brush-less motor)
and control PWB are built-in to LCC.
Off-center adjustment 3mm(Move the regulation plate F/R to adjustment)
Power consumption(without heater)
Normal operationDuring lift-up
: 26.4W: 40.8W
Power source 5V5% and 24V5% are supplied from mainunit
External dimensions
(W x D x H)
370 x 550 x 520 mm
Dimensions occupied by
Machine
(W x D)
370 x 550 (mm) * Clearance with main unit:
235 mm
Weight Approx. 30 kg
Opt ional detection Auto detection system
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
11/466MX-3100N SPECIFICATIONS 2 5
F. Paper exit section
(1) Center tray of main unit
(2) Shifter
(3) Paper exit tray
G. Copy functions
(1) Copy magnification ratio
(2) Density/copy image quality process
(3) Color copy mode
(4) Duplex
(5) Copy functions
Paper exi t section Center section of the main uni t
Paper exit system Face-down paper exit sys tem
Paper exit capaci ty 500 sheets (When A4, 8.5 x 11)
(recommended paper for color)
Paper exit paper size/
weight
Thin paper:
13 lb bond - 16 lb bond (55 - 59g/m2)
Plain paper:
16 lb bond - 28 lb bond (60 - 105g/m2)
Heavy paper:
28 lb bond - 110 lb index (106 - 209g/m2),
110 lb index -140 lb index (210 - 256g/m2)
* A3W/12x8 paper exiting is not allowed.
Shifter function Yes
Paper exit full detection Yes
Paper weight 55 - 256g/m2
Paper size/type Offset mode Size:
Envelope and custom size are
not acceptable
Type:
Envelope, OHP, label paper and
tab paper are not acceptable
Offset width 30 mm
Integrity Non-offset Getting out:It doesn't fall down from tray
Offset mode Getting out: within 50 mm
FR shift: within 10 mmJOB distance: 10 mm or more
Type Exit tray unit
Paper exit position/
system
Paper exit to external in the right side of the
main unit/Paper exits in face-down
Paper exit capaci ty 100 sheets (When A4/8.5 x 11)
(recommended paer for color)
Paper exit paper size/
type
All of allowable paper for paper feed except
envelope, tab paper and gloss paper.
Paper exit paper full
detection
Yes
Shifter function No
Copy magnification ratio Normal ratio 1 :1 0.8%
AB series 25%, 50%, 70%, 81%, 86%,
100%, 115%, 122%, 141%,
200%, 400%
Inch series 25%, 50%, 64%, 77%, 100%,
121%, 129%, 200%, 400%
Zoom 25-400% (RSPF: 25-200%)
Preset magnification
ratio
4
Exposure mode Automatic, Text, Text/Pr inted Photo,
Printed Photo, Text/Photograph, Photograph,
Map, light document
Number of manual steps 9 steps
Toner save mode Yes
* Off on printed photo, photograph or light
document
Auto color selection Copy mode automatically discerning color/
monochrome.
Full color Full color copy
Two color (Red/Black mode)
Copies with one color (R/G/B/C/M/Y) that is
replaced from red color area in document, and
black color.
Single color Mode to select one color from R/G/B/C/M/Y
System Non stack system
Paper size A3, B4, A4, A4R, B5, B5R, A5R, 11 x 17,
8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 8.5 x 13,
8.5 x 11, 8.5 x 11R, 5.5 x 8.5R
Type and weight of
paper which can be
passed
Plain paper:
16 lb bond - 28 lb bond (60 - 105g/m2)
Heavy paper:
28 - 110 lb bond (106 - 209 g/m2)
Paper type Plain paper, recycled paper, colored paper,
letter head, re-printed paper, pre-punched
paper, heavy paper
Function
Automatic paper selection Job reservation (99 items)
Automatic magnification ratioselection
Tray installation priority
Paper type selection Program call/register (48 items)
Auto tray switching Document paper size input
Rotation copy Indefinite paper size input
Electronic sort Duplex copy direction switching
Special functions
Binding margin (Left and Right/Top) (Multi shot) (Centering provided,
page printing based on number
of original pages is provided)Erase (Edge/Center/center + edge/
side erase)
2 in 1
Center binding (Centering provided) Book copy
Large volume document mode Tab copy
Tandem copy Card shot
Cover paper insertion Automatic temporary save
Only insertion of tab paper.Combination with tab copy is not
allowed.
FilingTrial copy
Document count
Mixed document feeder
OHP insert paper Thin paper scanning
Document control (When the data security kit is installed)
Print menu Color adjustment
Date print Stamp RGB Color balance
Character print Page print Sharpness Brightness
adjustment
Background
removal
Vividness
adjustment
Modifying image
Photo repeat A3 wide copy Auto color calibration
(Setting with system)
Enlargement
continuous copy
Centering Registration
(Setting with system)
Mirror image Black-whitereversion
7/14/2019 MX_2301N_2600N_3100_S3E
12/466MX-3100N SPECIFICATIONS 2 6
H. Printer function
(1) Platform
(2) Support OS
(3) PDL emulation
(4) Font
(5) Print channel
(6) Environment setting
I. Image send function
(1) Mode
(2) Support system
(3) Support image
IBM PC/AT
Macintosh
OSCusto
m PCL6
Custom
PCL5c
Custo
m
PS
PPDSPLC
-c
Win-
dows
98 / Me
Yes
Yes
Yes Yes
Yes
NT 4.0 SP5 orlater
No
2000
Yes
XP
XP x 64 No
Server 2003 Yes
Server 2003
x 64No
Vista Yes
Vista x 64
NoServer 2008
Server 2008 x 64
Mac 9.2.2
No No No Yes No
X 10.2.8
X 10.3.9
10.4.11X 10.5-10.5.6
Enulation
MX-2600G/
MX-3100G
MX-2301N/
MX-2600N/
MX-3100N
PCL5c compatibility, PCL6 compatibility Option Standard
PostScript 3 compatibility Option
Emulation Built-in fonts Option font
PCL5c
copatibility,
PCL6
compatibility
Roman outline fonts = 80 fonts
Line printer font (BMP) = 1 font
Font for bar code
= 28 fonts
PostScript 3
compatibility
Roman outline fonts
= 136 fonts
Support print
channel
PSERVER/RPRINT for netware environment
LPR
IPP
PAP:EtherTalk
FTP
NetBEUI
Raw Port (Port 9100)
USB 1.1 (Windows98/Me/2000/Server2003/XP/Vista)
USB 2.0 (For Windows2000/XP/Vista only)
HTTP (Web Submit Print)
POP3 (E-Mail To Print)
Setting item General
Default setting Basic settings for using the printer such as the number
of copies and the print direction
PCL Setting of the PCL symbol and fonts
PS Setting of enabling/disabling of print in case of a PS
error, setting of binary data outputting
2
2
2
Scanner Scan to e-mail
Scan to Desktop
Scan to FTP
Scan to Folder (SMB)
Scan to USB memory
Scan to e-mail with Meta
Scan to Desktop with Meta
Scan to FTP with Meta
Scan to SMB with Meta
Scan to e-mail/FTP/Desktop/SMB(Document Admin)
Fax Fax to Fax (Manual)
Fax to e-mail/Internet Fax/Fax (Relay transfer)
Fax to e-mail/FTP/Desktop/SMB (Inbound routing)
Fax to e-mail/FTP/Desktop/SMB (Document Admin)
Internet Fax Internet Fax to Internet FAX (Manual)
Internet Fax to e-mail/FTP/Desktop/SMB
(Inbound routing)
Internet Fax to e-mail/FTP/Desktop/SMB
(Document Admin)
Mode Scanner Internet Fax Fax
Corresponding
server/protocol
SMTP
FTP (TCP / IP)
SMB
POP server
SMTP server
ESMTP server
---
Mode Scanner Internet Fax Fax
File format Monochrome:
TIFF, PDF, Encrypted
PDF, XPS
Color/
Gray scale:
Color TIFF, JPEG,
PDF, Encrypted PDF,
XPS
TIFF-FX
(TIFF-F, TIFF-S)
---
Compression
system
Monochrome:
Non-compression
G3 = MH
G4 = MMRColor / Gray scale:
JPEG
(High compression/
Middle
compression/
Low compression)
Non-compression,
MH, MMR
---
Conversion for
each page to a
file (Available
to quantity
specification)
Yes ---
: '09/Sep2
7/14/2019 MX_2301N_2600N_3100_S3E
13/466MX-3100N SPECIFICATIONS 2 7
(4) Item Number of registration items
J. PC-Fax, PC internet Fax functions
(1) Working environment
(2) Functions
K. Document filing function
(1) Basic function
(*1): When the standard document (A4 monochrome: test sheet C)
is used.
(*2): When the color document (A4, greg fruit) is used.
(2) Data operation by each function
Item No. of registration items
One-touch/ Group 999 items
Max. number of registration items for one
group (500 items)
Program 48 items
Memory box Total of bulletin board / confidential letter /
relay and broadcast: 100 items
Sender registration FAX, Internet FAX: 1 item
User list (Return address list) Scanner: 1,000 items
Transfer table list 50 items
Sender number 18 itemsItem name 30 items
File name 30 items
Fixed phrase 30 items
Meta data set list 10 items
Receive rejection address Internet FAX: 50 items, Fax: 50 items
(In total 50 items)
Polling allow number FAX: 10 items
OS Windows 98
Windows Me
Windows NT4.0 Workstation
(Service Pack5, IE4.0 or more)
Windows 2000
Windows XP
Windows server 2003
Windows Vista
PC IBM PC/AT compatible machine
CPU Pentium II 300MHz or more
Monitor Screen resolution: 640 X 480 pixel or above
Number of colors: 256 colors or above
Memory 64 MB or more
HDD Empty capacity of 50MB or above
Interface USB 2.0
10/100BASE-TX
1000BASE-T
Communication protocol LPR / lp
Port9100 (RAW)
IPP
USB2.0
PC-FAX send Yes
(When FAX is installed)
FAX number max. 64 digits
PC-Internet FAX send Yes (Internet FAX expansion kit is required)
Internet FAX address: max. 64 digits
Resolution 200 x 100dpi / 200 x 200dpi / 200 x 400dpi /
400 x 400dpi /600 x 600dpi
Send document size A3 / B4 / A4 / A5 / B5 / 11 x 17 / 8.5 x 14 /
8.5 x 11 / 5.5 x 8.5 / 8.5 x 13
Compression system MH / MMR / JBIG
Broadcast send Yes (Max. 500 items)F-code send Yes Sub address Yes
(Max. 20 digits)
Pass code Yes
(Max. 20 digits)
Telephone book
registration, Send function
Yes
Covering letter
attachment function
Yes
Covering letter making
function
Yes
Sender print Prints always
Preview Yes
Delivery confirmation
(Notification to PC by
NJR)
Yes
Document fi ling function Fil ing
Automatic temporary save
PC- FAX send log Yes
User authentication Yes
Number of files
that can be saved
in the standard
folder/user folder
38GB
Monochrome (Text): 5,500 pages or 3,000 files (*1)
Full color data (Text and Photo): 2,500 pages (*2)
Number of files
that can be saved
in temporary file
folders.
12GB
Monochrome (Text): 1,700 pages or 1,000 files (*1)
Full color data (Text and Photo): 800 pages (*2)
Number of folders
that can be made
as user folders.
Max. 1,000 folder
Number of users
which can be
registered
Same as that of account users o f the main unit
Original (Text, A4): Test Sheet C Original (Color, A4): Greg fruit
Job
Each folder in the
standard folder
/user folder
Temporary folder
Sharing
storage
Confi-
dential
storage
Sharing
storage
Confi-
dential
storage
CopyYes Yes
YesNo
Printer
Direct print (FTP pull)
No
No
Direct print (FTP push)
Direct print (USB pull)
Direct print (e-mail push) Yes
Direct print (Web push)
NoDirect print (SMB pull)
Scan to e-mail/FTP
Yes
Scan to SMB Yes
FAX sendNo
Internet FAX send
PC FAX / PC Internet
FAX send Yes
Scan to HDD No
7/14/2019 MX_2301N_2600N_3100_S3E
14/466MX-3100N SPECIFICATIONS 2 8
(3) Data operation contents
* During the above setting on the operation panel, web access is
disabled.
(4) Reprint / resend limitation items for each job
* "Color" includes "Color/BW Mixing."
L. Ambient conditions
(1) Working environmentOperation content Operation panel WEB
Reprint
Yes
Yes
Resend
Delete
Shift
Attribute change (Common/
Confidential/Protection)
Confidential file setting
Confidental folder setting
File name change
Creation of a folder
File transfer to Local PC No
Machine HDD occupying rate
displayYes
Confirmation of save data
image (Preview)
Yes
(The print data displays only
the first page.)
Retrieval
Yes
Collective print
(When the user name and the
password of target files in the
folder are the same)
Delete with the time specified
Multi file selection (print only)
ModeJob
kind
Data
save
Reprint Resend
ColorMono-
chromeColor
Mono-
chrome
Copy Copy Color Yes
Yes
Yes
YesMono-
chromeNo
NoPrinter Printer Color Yes No
NoMono-
chromeNo
Yes
Image
send
Scan
send
Color Yes Yes
Yes
Mono-
chrome
No NoFAXsend
Mono-chrome
Internet
FAX
send
Mono-
chrome
Document
filing
Scan
save
Color Yes Yes
Mono-
chromeNo No
Standard environmental
conditions
Temperature 20 25 C
Humidity 65 5 %RH
Usage environmental
conditions
Temperature 10 35 C
Humidity 20 85 %RH
Atmospheric
pressure
590 1013 hPa
(height: 0 2000m)
Quality Guarantee Period Toner and Developer: 24 months from the
production month (unopened)
Drum: 36 months from the production month
(keep packing)
85%
60%
20%
10 30 35
(Humidity)
(Temperature)
1
: '08 Oct 151
7/14/2019 MX_2301N_2600N_3100_S3E
15/466MX-3100N CONSUMABLE PARTS 3 1
MX-3100N Service Manual[3] CONSUMABLE PARTS
1. Supply system table
A. USA/Canada/South and Central America
*1: The toner life may vary depending on the document density and temperature and humidity.
B. Europe/East Europe/Russia/Australia/New Zealand
*1: The toner life may vary depending on the document density and temperature and humidity.
C. Asia/Hong Kong
*1: The toner life may vary depending on the document density and temperature and humidity.
No. Item Content Life Model Name Remarks
1 Toner Cartridge (Black) Toner Cartridge (Black) with IC Chip x 1 18K *1 MX-31NTBA * Life: A4/Letter size
at Area Coverage 5%
(Reference: 15K for A4/Letter 6%)
2 Toner Cartridge (Cyan) Toner Cartridge (Cyan) with IC Chip x 1 15K *1 MX-31NTCA * Life: A4/Letter size
at Area Coverage 5%3 Toner Cartridge (Magenta) Toner Cartridge (Magenta) with IC Chip x 1 15K *1 MX-31NTMA * Life: A4/Letter size
at Area Coverage 5%
4 Toner Cartridge (Yellow) Toner Cartridge (Yellow) with IC Chip x 1 15K *1 MX-31NTYA * Life: A4/Letter size
at Area Coverage 5%
5 Developer (Black) Developer (Black) x 1 100K MX-31NVBA
6 Developer
(Cyan/Magenta/Yellow
(3 colors/set))
Developer
(Cyan/Magenta/Yellow (3 colors / set))
x 1 60K MX-31NVSA
7 Drum OPC Drum x 1 100K (Black)
60K (Color)
MX-31NRSA
8 Drum Unit Drum Unit (Process unit + OPC Drum)
Color identification seal (B/C/M/Y) x 1 each
Charger cleaner
x 1
x 1
x 1
100K (Black)
60K (Color)
MX-31NUSA
No. Item Content Life Model Name Remarks
1 Toner Cartridge (Black) Toner Cartridge (Black) with IC Chip x 1 18K *1 MX-31GTBA * Life: A4/Letter size
at Area Coverage 5%
(Reference: 15K for A4/Letter 6%)
2 Toner Cartridge (Cyan) Toner Cartridge (Cyan) with IC Chip x 1 15K *1 MX-31GTCA * Life: A4/Letter size
at Area Coverage 5%
3 Toner Cartridge (Magenta) Toner Cartridge (Magenta) with IC Chip x 1 15K *1 MX-31GTMA * Life: A4/Letter size
at Area Coverage 5%
4 Toner Cartridge (Yellow) Toner Cartridge (Yellow) with IC Chip x 1 15K *1 MX-31GTYA * Life: A4/Letter size
at Area Coverage 5%
5 Developer (Black) Developer (Black) x 1 100K MX-31GVBA
6 Developer
(Cyan/Magenta/Yellow
(3 colors/set))
Developer
(Cyan/Magenta/Yellow (3 colors / set))
x 1 60K MX-31GVSA
7 Drum OPC Drum x 1 100K (Black)60K (Color)
MX-31GRSA
8 Drum Unit Drum Unit (Process unit + OPC Drum
Color identification seal (B/C/M/Y) x 1 each
Charger cleaner
x 1
x 1
x 1
100K (Black)
60K (Color)
MX-31GUSA
No. Item Content Life Model Name Remarks
1 Toner Cartridge (Black) Toner Cartridge (Black) with IC Chip x 1 18K *1 MX-31ATBA * Life: A4/Letter size
at Area Coverage 5%
(Reference: 15K for A4/Letter 6%)
2 Toner Cartridge (Cyan) Toner Cartridge (Cyan) with IC Chip x 1 15K *1 MX-31ATCA * Life: A4/Letter size
at Area Coverage 5%
3 Toner Cartridge (Magenta) Toner Cartridge (Magenta) with IC Chip x 1 15K *1 MX-31ATMA * Life: A4/Letter size
at Area Coverage 5%
4 Toner Cartridge (Yellow) Toner Cartridge (Yellow) with IC Chip x 1 15K *1 MX-31ATYA * Life: A4/Letter size
at Area Coverage 5%
5 Developer (Black) Developer (Black) x 1 100K MX-31AVBA
6 Developer
(Cyan/Magenta/Yellow
(3 colors/set))
Developer
(Cyan/Magenta/Yellow (3 colors / set))
x 1 60K MX-31AVSA
7 Drum OPC Drum x 1 100K (Black)
60K (Color)
MX-31ARSA
8 Drum Unit Drum Unit (OPC Drum/Unit Parts included)
Color identification seal (B/C/M/Y) x 1 each
Charger cleaner
x 1
x 1
x 1
100K (Black)
60K (Color)
MX-31AUSA
7/14/2019 MX_2301N_2600N_3100_S3E
16/466MX-3100N CONSUMABLE PARTS 3 2
D. Middle East/Taiwan/Africa/Israel/Philippines
*1: The toner life may vary depending on the document density and temperature and humidity.
E. Brazil
*1: The toner life may vary depending on the document density and temperature and humidity.
No. Item Content Life Model Name Remarks
1 Toner Cartridge (Black) Toner Cartridge (Black) with IC Chip x 1 18K *1 MX-31FTBA * Life: A4/Letter size
at Area Coverage 5%
(Reference: 15K for A4/Letter 6%)
2 Toner Cartridge (Cyan) Toner Cartridge (Cyan) with IC Chip x 1 15K *1 MX-31FTCA * Life: A4/Letter size
at Area Coverage 5%
3 Toner Cartridge (Magenta) Toner Cartridge (Magenta) with IC Chip x 1 15K *1 MX-31FTMA * Life: A4/Letter size
at Area Coverage 5%
4 Toner Cartridge (Yellow) Toner Cartridge (Yellow) with IC Chip x 1 15K *1 MX-31FTYA * Life: A4/Letter size
at Area Coverage 5%
5 Developer (Black) Developer (Black) x 1 100K MX-31FVBA6 Developer
(Cyan/Magenta/Yellow
(3 colors/set))
Developer
(Cyan/Magenta/Yellow (3 colors / set))
x 1 60K MX-31FVSA
7 Drum OPC Drum x 1 100K (Black)
60K (Color)
MX-31FRSA
8 Drum Unit Drum Unit (Process unit + OPC Drum)
Color identification seal (B/C/M/Y) x 1 each
Charger cleaner
x 1
x 1
x 1
100K (Black)
60K (Color)
MX-31FUSA
No. Item Content Life Model Name Remarks
1 Toner Cartridge (Black) Toner Cartridge (Black) with IC Chip x 1 18K *1 MX-31BTBA * Life: A4/Letter size
at Area Coverage 5%
(Reference: 15K for A4/Letter 6%)
2 Toner Cartridge (Cyan) Toner Cartridge (Cyan) with IC Chip x 1 15K *1 MX-31BTCA * Life: A4/Letter size
at Area Coverage 5%
3 Toner Cartridge (Magenta) Toner Cartridge (Magenta) with IC Chip x 1 15K *1 MX-31BTMA * Life: A4/Letter size
at Area Coverage 5%
4 Toner Cartridge (Yellow) Toner Cartridge (Yellow) with IC Chip x 1 15K *1 MX-31BTYA * Life: A4/Letter size
at Area Coverage 5%
5 Developer (Black) Developer (Black) x 1 100K MX-31NVBA
6 Developer
(Cyan/Magenta/Yellow
(3 colors/set))
Developer
(Cyan/Magenta/Yellow (3 colors / set))
x 1 60K MX-31NVSA
7 Drum OPC Drum x 1 100K (Black)
60K (Color)
MX31NRSA
8 Drum Unit Drum Unit (Process unit + OPC Drum)
Color identification seal (B/C/M/Y) x 1 each
Charger cleaner
x 1
x 1
x 1
100K (Black)
60K (Color)
MX-31NUSA
7/14/2019 MX_2301N_2600N_3100_S3E
17/466MX-3100N CONSUMABLE PARTS 3 3
2. Maintenance parts list
A. U.S.A/Canada/South and Central America
B. Europe/UK/Australia/New Zealand
No. Item Content Life Model name Remarks
1 Heat roller kit Upper heat roller unit x 1 200K MX-310HK
Upper separation pawl x 4
Upper separation pawl spring x 4
Lower separation pawl x 4
Lower separation pawl spring x 4
Upper thermistor x 1
Lower heat roller unit x 1
Lower thermistor x 12 Primary transfer kit Primary transfer belt x 1 200K MX-310Y1
Transfer cleaning blade x 1
PTC unit x 1
Primary transfer roller x 4
Belt drive gear x 1
3 Secondary transfer kit Secondary transfer belt x 1 300K MX-310Y2
Secondary transfer roller x 1
Secondary transfer idle gear x 1
Upper thermistor PA x 1
4 Filter kit Ozone filter CJ x 1 100K MX-310FL
Paper ejection filter x 2
5 PS paper dust removing unit PS paper dust removing unit x 1 100K MX-310PD
6 Waste toner box kit Waste toner box unit (with LSU cleaner x 3) x 1 50K MX-310HB 5% coverage for each
color; 25% color ratio
7 DV blade kit DV blade N kit x 1 Black: 100K,Color: 60K
MX-310DSDV side seal F (three in one) x 1
DV side seal R (three in one) x 1
Toner filter unit x 3
8 Main charger kit Main charger unit x 1 Black: 100K,
Color: 60K
MX-310MK
Drum cleaning blade x 1
Cleaning Gum P2 x 1
9 Staple cartridge Staple cartridge x 3 2000 times x 3 AR-SC3 For saddle stitch finisher
(MX-FN10)
10 Staple cartridge Staple cartridge x 3 5000 times x 3 MX-SCX1 For finisher (MX-FNX9/
MX-FN10)
11 Stamp cartridge Stamp cartridge x 2 AR-SV1
12 Primary transfer belt unit Primary transfer belt unit (For service purpose) x 1 MX-310U1
13 Secondary transfer belt unit Secondary transfer belt unit (For service purpose) x 1 MX-310U2
14 Fusing unit Fusing unit (For service purpose: Heater lamp 120V) x 1 MX-310FU1
Fusing unit (For service purpose: Heater lamp 230V) x 1 MX-310FU
15 Fuser cleaning roller kit Fuser cleaning roller x 1 100K MX-310CR
Bearing x 2
No. Item Content Life Model name Remarks
1 Upper heat roller kit Upper heat roller unit x 1 200K MX-310UH
Upper separation pawl x 4
Upper separation pawl spring x 4
Upper thermistor x 1
2 Lower heat roller kit Lower heat roller unit x 1 200K MX-310LH
Lower separation pawl x 4
Lower separation pawl spring x 4
Lower thermistor x 1
3 Primary transfer belt kit Primary transfer belt x 1 200K MX-310B1
Transfer cleaning blade x 1PTC unit x 1
4 Primary transfer roller kit Primary transfer roller x 4 200K MX-310X1
Belt drive gear x 1
5 Secondary transfer belt kit Secondary transfer belt x 1 300K MX-310B2
6 Secondary transfer roller kit Secondary transfer roller x 1 300K MX-310X2
Secondary transfer idle gear x 1
Upper thermistor PA x 1
7 PS paper dust removing unit PS paper dust removing unit x 1 100K MX-310PD
8 Filter kit Ozone filter CJ x 1 100K MX-310FL
Paper ejection filter x 2
9 Waste toner box kit Waste toner box unit (with LSU cleaner x 3) x 1 50K MX-310HB 5% coverage for each
color; 25% color ratio
7/14/2019 MX_2301N_2600N_3100_S3E
18/466MX-3100N CONSUMABLE PARTS 3 4
C. Hong Kong
10 DV blade kit DV blade N kit x 1 Black: 100K,
Color: 60K
MX-310DS
DV side seal F (three in one) x 1
DV side seal R (three in one) x 1
Toner filter unit x 3
11 Main charger kit Main charger unit x 1 Black: 100K,
Color: 60K
MX-310MK
Drum cleaning blade x 1
Cleaning Gum P2 x 1
12 Staple cartridge Staple cartridge x 3 2000 times x 3 AR-SC3 For saddle stitch finisher
(MX-FN10)
13 Staple cartridge Staple cartridge x 3 5000 times x 3 MX-SCX1 For finisher
(MX-FNX9/MX-FN10)
14 Stamp cartridge Stamp cartridge x 2 AR-SV1
15 Primary transfer belt unit Primary transfer belt unit (For service purpose) x 1 MX-310U1
16 Secondary transfer belt unit Secondary transfer belt unit (For service purpose) x 1 MX-310U2
17 Fusing unit Fusing unit (For service purpose: Heater lamp 230V) x 1 MX-310FU
18 Fuser cleaning roller kit Fuser cleaning roller x 1 100K MX-310CR
Bearing x 2
No. Item Content Life Model name Remarks
1 Heat roller kit Upper heat roller unit x 1 200K MX-310HK
Upper separation pawl x 4
Upper separation pawl spring x 4
Lower separation pawl x 4
Lower separation pawl spring x 4
Upper thermistor x 1Lower heat roller unit x 1
Lower thermistor x 1
2 Primary transfer kit Primary transfer belt x 1 200K MX-310Y1
Transfer cleaning blade x 1
PTC unit x 1
Primary transfer roller x 4
Belt drive gear x 1
3 Secondary transfer kit Secondary transfer belt x 1 300K MX-310Y2
Secondary transfer roller x 1
Secondary transfer idle gear x 1
Upper thermistor PA x 1
4 Filter kit Ozone filter CJ x 1 100K MX-310FLN
5 PS paper dust removing unit PS paper dust removing unit x 1 100K MX-310PD
6 Waste toner box kit Waste toner box unit (with LSU cleaner x 3) x 1 50K MX-310HB 5% coverage for each
color; 25% color ratio
7 DV blade kit DV blade N kit x 1 Black: 100K,
Color: 60K
MX-310DS
DV side seal F (three in one) x 1
DV side seal R (three in one) x 1
Toner filter unit x 3
8 Main charger kit Main charger unit x 1 Black: 100K,
Color: 60K
MX-310MK
Drum cleaning blade x 1
Cleaning Gum P2 x 1
9 Staple cartridge Staple cartridge x 3 2000 times x 3 AR-SC3 For saddle stitch finisher
(MX-FN10)
10 Staple cartridge Staple cartridge x 3 5000 times x 3 MX-SCX1 For finisher
(MX-FNX9/MX-FN10)
11 Stamp cartridge Stamp cartridge x 2 AR-SV1
12 Primary transfer belt unit Primary transfer belt unit (For service purpose) x 1 MX-310U1
13 Secondary transfer belt unit Secondary transfer belt unit (For service purpose) x 1 MX-310U2
14 Fusing unit Fusing unit (For service purpose: Heater lamp 230V) x 1 MX-310FU
15 Fuser cleaning roller kit Fuser cleaning roller x 1 100K MX-310CRBearing x 2
No. Item Content Life Model name Remarks
7/14/2019 MX_2301N_2600N_3100_S3E
19/466MX-3100N CONSUMABLE PARTS 3 5
D. Asia/Middle East/Agency
No. Item Content Life Model name Remarks
1 Heat roller kit Upper heat roller unit x 1 200K MX-310HK
Upper separation pawl x 4
Upper separation pawl spring x 4
Lower separation pawl x 4
Lower separation pawl spring x 4
Upper thermistor x 1
Lower heat roller unit x 1
Lower thermistor x 1
2 Primary transfer kit Primary transfer belt x 1 200K MX-310Y1
Transfer cleaning blade x 1
PTC unit x 1
Primary transfer roller x 4
Belt drive gear x 1
3 Secondary transfer kit Secondary transfer belt x 1 300K MX-310Y2
Secondary transfer roller x 1
Secondary transfer idle gear x 1
Upper thermistor PA x 1
4 Filter kit Ozone filter CJ x 1 100K MX-310FLN
5 PS paper dust removing unit PS paper dust removing unit x 1 100K MX-310PD
6 Waste toner box kit Waste toner box unit (with LSU cleaner x 3) x 1 50K MX-310HB 5% coverage for each
color; 25% color ratio
7 DV blade kit DV blade N kit x 1 Black: 100K,
Color: 60K
MX-310DS
DV side seal F (three in one) x 1
DV side seal R (three in one) x 1
Toner filter unit x 38 Main charger kit Main charger unit x 1 Black: 100K,
Color: 60K
MX-310MK
Drum cleaning blade x 1
Cleaning Gum P2 x 1
9 Staple cartridge Staple cartridge x 3 2000 times x 3 AR-SC3 For saddle stitch finisher
(MX-FN10)
10 Staple cartridge Staple cartridge x 3 5000 times x 3 MX-SCX1 For finisher (MX-FNX9/
MX-FN10)
11 Stamp cartridge Stamp cartridge x 2 AR-SV1
12 Primary transfer belt unit Primary transfer belt unit (For service purpose) x 1 MX-310U1
13 Secondary transfer belt unit Secondary transfer belt unit (For service purpose) x 1 MX-310U2
14 Fusing unit Fusing unit (For service purpose: Heater lamp 120V) x 1 MX-310FU1
Fusing unit (For service purpose: Heater lamp 230V) x 1 MX-310FU
15 Fuser cleaning roller kit Fuser cleaning roller x 1 100K MX-310CR
Bearing x 2
7/14/2019 MX_2301N_2600N_3100_S3E
20/466MX-3100N CONSUMABLE PARTS 3 6
3. Definition of developer/drum life end
When the developer/drum counter reaches the specified level.
When the developer/drum rpm reaches the specified level.
When either of the above reached the specified level, it is judged
as life end.
In an actual case, the ratio of monochrome output and color output
may differ greatly.
When data of mixed documents (monochrome and color) are out-
put, monochrome document data may be output in the color mode
in order to prevent against fall in the job efficiency. (ACS auto colorselection).
In addition, when correction or warm-up operation is performed as
well as output operation, the developer and the drum rotates.
Therefore, the developer/drum consuming level cannot be deter-
mined only by the copy/print quantity. When, therefore, the rpm
reaches the specified level, it is judged as life end.
To check the drum life, use SIM22-1/22-13.
(840K rotations = 7,916,813cm)
4. Production number identification
A. Drum cartridge
The lot number is of 10 digits. Each digit indicates the content as
follows.
The number is printed on the flange on the front side.
B. Developer
The lot number is of 8 digits. Each digit indicates the content as fol-
lows.
The number is printed on the right under side of the back surface of
the developer bag.
Developer/drum counter Developer/drum rpm
B/W Full color B/W Full color
Developer/
drum
100K 60K 840K
rotations
840K
rotations
Black developer/drum Color developer/drum
Single multi 56,000 44,000
2 sheets multi 85,000 56,000
3 sheets multi 100,000 60,000
4 sheets multi 107,000 64,000
0
20,000
40,000
60,000
80,000
100,000
120,000
Printable
counter
Single multi 2 sheets multi 3 sheets multi 4 sheets multi
Black drum
Color drum
1: Number
For this model, this digit is 2.
2: Alphabet
Indicates the model conformity code.
3: Number
Indicates the end digit of the production year.
4: Number or X, Y, Z
Indicates the production month.
X stands for October, Y November, and Z December.
5/6: Number
Indicates the day of the production date.
X stands for October, Y November, and Z December.
7: Number
Indicates the day of the month of packing.
X stands for October, Y November, and Z December.
8/9: Number
Indicates the day of the packing date.
10: Alphabet
Indicates the production factory.
1: Alphabet
Indicates the production factory.
2: Number
Indicates the production year.
3/4: Number
Indicates the production month.
5/6: Number
Indicates the production day.
7: Hyphen
8: Number
Indicates the production lot.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8
BK
C.M .Y
7/14/2019 MX_2301N_2600N_3100_S3E
21/466MX-3100N CONSUMABLE PARTS 3 7
C. Toner cartridge
The label indicating the management number is attached to the
side of the toner cartridge.
Part name
Toner col or
Productionplace
Serial No. in production day
Productionyear/month/day
Version
Destination
Incompatibility
Example: 1st of production onJune 1, 2008
7/14/2019 MX_2301N_2600N_3100_S3E
22/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 1
MX-3100N Service Manual[5] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Identification of each section and functions
A. External view
* Peripheral device.
The peripheral devices are basically options. There are some destinations that peripheral device is provided as a standard unit.
(1) (2) (3) (6)(5)(4) (7)
(8) (9) (11)(10) (14)(12) (13)
(15)
When a finisher / saddlestitch finisher is not installed
When a keyboardis installed
When a finisher is installed
No. Name function/Operation NOTE
1 Automatic document feeder This automatically feeds and scans multiple originals. Both sides of 2-sided
originals can be automatically scanned.
2 Front cover Open this cover to switch the main power switch to "On" or "Off" or to replace a
toner cartridge.
3 Paper pass unit* This transfers output to the saddle stitch finisher.
4 Operation panel This is used to select functions and enter the number of copies.
5 USB connector (A type) Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as
USB memory to the machine. For the USB cable, use a shielded cable.6 Exit tray unit (right tray)* When installed, output can be delivered to this tray.
7 Output tray (center tray) Output is delivered to this tray.
8 Keyboard* This is a keyboard that is incorporated into the machine. When not used, it can
be stored under the operation panel.
9 Saddle st itch f inisher* This can be used to staple output. The saddle stitch funct ion for folding and
stapling output and the fold function for folding output in half are also available. A
punch module can also be installed to punch holes in output.
10 Tray 1 Up to 500 sheets of paper (80 g/m2 (21 lbs.)) can be loaded in each tray.
11 Tray 2
12 Tray 3 (when a stand/1 x 500 sheet
paper drawer or a stand/2 x 500 sheet
paper drawer is installed)*
This holds paper. Up to 500 sheets of paper (80 g/m2 (21 lbs.)) can be loaded.
13 Tray 4 (when a stand/2 x 500 sheet
paper drawer is installed)*
This holds paper. Up to 500 sheets of paper (80 g/m2 (21 lbs.)) can be loaded.
14 Tray 5 (when a large capacity tray is
installed)*
Up to 3500 sheets of paper (80 g/m2 (21 lbs.)) can be loaded.
When a stand/1 x 500 sheet paper drawer is installed, this is tray 4.15 Finisher* This can be used to staple output. A punch module can also be installed to
punch holes in output.
7/14/2019 MX_2301N_2600N_3100_S3E
23/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 2
B. Internal operation parts
No. Name Function/Operation NOTE
1 Toner cartridges These contain toner for printing. When the toner runs out in a cartridge, the
cartridge of the color that ran out must be replaced.
2 Fusing unit Heat is applied here to fuse the transferred image onto the paper. Caution:
The fusing unit is hot. Take
care not to burn yourself
when removing a paper
misfeed.
3 Transfer belt During full color printing, the toner images of each of the four colors on each of
the photoconductive drums are combined together on the transfer belt. During
black and white printing, only the black toner image is transferred onto the
transfer belt.
Do not touch or damage the
transfer belt. This may cause
a defective image.
4 Right side cover Open this cover to remove a paper misfeed.
5 Paper reversing section cover This is used when 2-sided printing is performed. Open this cover to remove apaper misfeed.
6 Bypass tray Use this tray to feed paper manually. When loading paper larger than 8-1/2" x
11"R or A4R, be sure to pull out the bypass tray extension.
7 Main power switch This is used to power on the machine. When using the fax or Internet fax
functions, keep this switch in the "on" position.
8 Waste toner box This collects excess toner that remains after printing.
9 Waste toner box release button Press this button when you need to release the waste toner box lock to replace
the waste toner box or clean the laser unit.
10 Handle Pull this out and grasp it when moving the machine.
11 Right cover of stand/1 x 500 sheet
paper drawer Right cover of stand/2 x
500 sheet paper drawer (when a
stand/1 x 500 sheet paper drawer or a
stand/2 x 500 sheet paper drawer is
installed)
Open this to remove a paper misfeed in tray 3 or tray 4.
12 Paper t ray right side cover Open this to remove a paper misfeed in t ray 1 or tray 2.13 Right side cover release lever To remove a paper misfeed, pull and hold this lever up to open the right side
cover.
(1) (2) (3) (6)(5)(4)
(9)(8) (12) (13)(10) (11)(7)
7/14/2019 MX_2301N_2600N_3100_S3E
24/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 3
C. AUTOMATIC DOCUMENT FEEDER AND DOCUMENT GLASS
No. Name function/Operation NOTE
1 Paper feed roller This roller rotates to automatically feed the original.
2 Document feeding area cover Open this cover to remove an original misfeed or clean the paper feed roller.
3 Original guides These help ensure that the original is scanned correctly. Adjust the guides to the
width of the original.
4 Document feeder tray Place originals in this tray. 1-sided originals must be placed face up.
5 Original exit tray Originals are delivered to this tray after scanning.
6 Scanning area Originals placed in the document feeder tray are scanned here.
7 Original size detector This detects the size of an original placed on the document glass.
8 Reversing tray During scanning of a 2-sided original, the original is temporarily output to this
tray in order to be turned over for scanning of the reverse side.
9 Document glass Use this to scan a book or other thick original that cannot be fed through the
automatic document feeder.
(2)
(8)
(9)
(3) (4) (5) (6) (7)(1)
7/14/2019 MX_2301N_2600N_3100_S3E
25/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 4
D. Connector
No. Name function/Operation NOTE
1 USB connector (A type) Supports USB 2.0 (Hi-Speed). This is used to connect a USB device such as
USB memory to the machine. This connector is not initially available for use. If
you wish to use the connector, contact your service technician.
2 LAN connector Connect the LAN cable to this connector when the machine is used on a
network. For the LAN cable, use a shielded type cable.
3 USB connector (B type) Supports USB 2.0 (Hi-Speed). A computer can be connected to this connector to
use the machine as a printer. For the USB cable, use a shielded cable.
4 Service-only connector CAUTION: This connector is for use only by service technicians. Connecting acable to this connector may cause the machine to malfunction.
Important note for service technicians: The cable connected to the service
connector must be less than 118" (3 m) in length.
5 Power plug
6 Extension phone socket When the fax funct ion o f the machine is used, an extension phone can be
connected to this socket.
7 Telephone line socket When the fax funct ion o f the machine is used, the telephone line is connected to
this socket.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
When the fax expansion kit is installed
7/14/2019 MX_2301N_2600N_3100_S3E
26/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 5
E. Operation panel
(1) MX-2600N/3100N
No. Name function/Operation NOTE
1 Touch panel Messages and keys appear in the touch panel display. Touch the displayed keysto perform a variety of operations. When a key is touched, a beep sounds and
the selected item is highlighted. This provides confirmation as you perform an
operation.
2 [SYSTEM SETTINGS] key Press this key to display the system settings menu screen. The system settings
are used to configure paper tray settings, store addresses for transmission
operations, and adjust parameters to make the machine easier to use.
3 [JOB STATUS] key Press this key to display the job status screen. The job status screen is used to
check information on jobs and to cancel jobs.
4 PRINT mode indicators
READY indicator Print jobs can be received when this indicator is lit.
DATA indicator This blinks while print data is being received and lights steadily while printing istaking place.
5 Numeric keys These are used to enter the number of copies, fax numbers, and other numerical
values. These keys are also used to enter numeric value settings (except for thesystem settings).
6 [CLEAR] key ( ) Press this key to return the number of copies to "0".
7 [HOME] key Touch this key to display the home screen. Frequently used settings can be
registered in the home screen to enable quick and easy operation of the
machine.
8 IMAGE SEND mode indicators
LINE indicator This lights up during transmission or reception of a fax or Internet fax. This alsolights during transmission of an image in scan mode.
DATA indicator This blinks when a received fax or Internet fax cannot be printed because of aproblem such as out of paper. This lights up when there is a transmission job
that has not been sent.
9 [BLACK & WHITE START] key Press this key to copy or scan an original in black and white. This key is also
used to send a fax in fax mode.
10 [COLOR START] key Press th is key to copy or scan an orig inal in color. This key cannot be used for
fax or Internet fax.
11 [LOGOUT] key ( ) Press this key to log out after you have logged in and used the machine. When
using the fax function, this key can also be pressed to send tone signals on a
pulse dial line.
12 [#/P] key ( ) When using the copy function, press this key to use a job program. When using
the fax function, this key can be used when dialing.
13 [CLEAR ALL] key ( ) Press this key to return to the initial operation state. Use this key when you wish
to cancel all settings that have been selected and start operation from the initial
state.
14 [STOP] key ( ) Press this key to stop a copy job or scanning of an original.
15 [POWER SAVE] key ( ) / indicator Use this key to put the machine into auto power shut-off mode to save energy.
The [POWER SAVE] key ( ) blinks when the machine is in auto power shut-
off mode.
16 [POWER] key ( ) Use this key to turn the machine power on and off.
17 Main power indicator This lights up when the machine's main power switch is in the "on" position.
LOGOUT
HOME
IMAGE SEND
JOB STATUS PRINT
READY
DATA
DATA
LINE
SYSTEM
SETTINGS
(5)(4) (6)(3)(2)(1)
(8)(7) (13) (14) (15)(11) (12) (16)
(17)(9) (10)
7/14/2019 MX_2301N_2600N_3100_S3E
27/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 6
: '09/Sep2
(2) MX-2301N/2600G/3100G
No. Name function/Operation NOTE
1 Touch panel Messages and keys appear in the touch panel display.
Touch the displayed keys to perform a variety of operations.
When a key is touched, a beep sounds and the selected item is highlighted. This
provides confirmation as you perform an operation.
2 Mode select keys and indicators Use these keys to change the mode displayed in the touch panel.
The indicator of a key lights when the key is selected.
[DOCUMENT FILING] key Press this key to switch to document filing mode when you wish to store adocument as an image file on the hard drive or print or transmit an image stored
on the hard drive.
[ IMAGE SEND] key Press this key to select network scanner / fax mode to use the scanner functionor fax function.
[COPY] key Press this key to select copy mode. Hold the [COPY] key down to view themachine's total page use count and amount of toner remaining.
3 PRINT mode indicators
READY indicator Print jobs can be received when this indicator is lit.
DATA indicator This blinks while print data is being received and lights steadily while printing istaking place.
4 IMAGE SEND mode indicators
LINE indicator This lights up during transmission or reception of a fax or Internet fax. This alsolights during transmission of an image in scan mode.
DATA indicator This blinks when a received fax or Internet fax cannot be printed because of aproblem such as out of paper.
This lights up when there is a transmission job that has not been sent.
5 Numeric keys These are used to enter the number of copies, fax numbers, and other numerical
values. These keys are also used to enter numeric value settings (except for the
system settings).
6 [CLEAR] key ( ) Press this key to return the number of copies to "0".
7 [JOB STATUS] key Press this key to display the job status screen. The job status screen is used to
check information on jobs and to cancel jobs.
8 [SYSTEM SETTINGS] key Press this key to display the system settings menu screen. The system settings
are used to configure paper tray settings, store addresses for transmission
operations, and adjust parameters to make the machine easier to use.
9 Function key To use the SharpOSA function, press this key to switch to SharpOSA mode.
10 [BLACK & WHITE START] key Press this key to copy or scan an original in black and white. This key is also
used to send a fax in fax mode.
11 [COLOUR START] key Press this key to copy or scan an original in colour.
This key cannot be used for fax or Internet fax.
12 [LOGOUT] key ( ) Press this key to log out after you have logged in and used the machine. When
using the fax function, this key can also be pressed to send tone signals on a
pulse dial line.
13 [#/P] key ( ) When using the copy function, press this key to use a job program. When using
the fax function, this key can be used when dialling.
14 [CLEAR ALL] key ( ) Press this key to return to the initial operation state.
Use this key when you wish to cancel all settings that have been selected and
start operation from the initial state.
15 [STOP] key ( ) Press this key to stop a copy job or scanning of an original.
16 [POWER SAVE] key ( ) / indicator Use this key to put the machine into auto power shut-off mode to save energy.
The [POWER SAVE] key ( ) blinks when the machine is in auto power shut-
off mode.
17 [POWER] key ( ) Use this key to turn the machine power on and off.
18 Main power indicator This lights up when the machine's main power switch is in the "on" position.
2
LOGOUT
JOB STATUS
IMAGE SEND
DOCUMENTFILING
COPY
READY
DATA
DATA
LINE
SYSTEM
SETTINGS
(5)(3) (6)(4)(2)(1)
(8)(9)(7) (14) (15) (16)(12) (13) (17) (18)
(10) (11)
7/14/2019 MX_2301N_2600N_3100_S3E
28/466MX-3100N EXTERNAL VIEW AND INTERNAL STRUCTURE 5 7
F. Status display
No. Name function/Operation NOTE
1 Display selection key The status display can be switched between Job Status and MFP Status.
If the job status screen is displayed, the status display automatically changes to
"MFP Status".
2 Job Status display This shows the first 4 print jobs in the print queue (the job in progress and jobs
waiting to be printed). The type of job, the set number of copies, the number of
copies completed, and the job status appear.
Jobs cannot be manipulated in this screen. Jobs can only be manipulated in the
job status screen.
3 MFP Status display This shows machine system information.
Maintenance Information:
This shows machine maintenance information by means of codes.
Job Status
MFP Status
Job Status
Maintenance
Information
DC DC DC
DC DC DC
DC DC DC
MFP Status
020/015
Copying
020/015
Waiting
020/015
Waiting
020/015
Waiting
Color Mode Special Modes
Interrupt
2-Sided Copy
Output
File
Quick File
Copy Ratio
100%Or iginal Pape r Sel ect
Auto
8x11
Plain
Auto
8x11
Full