Call Management

Firmware

Touch 3,5” & 10” Control

Product Description

Via G.Toniolo, 28

30030 Vigonovo (VE)

www.stitalia.com – info@stitalia.com

Take the advantage of Bticino technology :

Using a simple touch screen Bticino Model H4684

or H4690, after installing the firmware "Call Mana-

gement", you can give a valid and simple solution

to managing calls, in environments like schools,

hotels or communities.

Using an intuitive graphical interface you can

monitor the status of calls made by the tie rods,

generate audible alarms, mute them, and turn on

a tranquilization light, all leveraging the proven

qualities of solidity and reliability of a system Bticino

My Home.

The additional functionality provided by this

firmware expand the capabilities, flexibility and

offer of supply facilities Bticino My Home, making

the call management easy and inexpensive, ex-

ploiting the present system.

A concrete example of this can be easily under-

stood in the case of an hotel, the centralization of

alarms, the ability to record them with date, time

and number of room allows to certify the plant for

use of the new DPR thus allowing to obtain a more

one star in the evaluation of the structure, with a

low cost.

What is necessary to use with My Home :

In order to realize the potential benefits the follo-

wing physical components must be present in the

installation, as shown by the diagram at bottom of

page.

It uses a command 3477 with the rod attached to

it that generates the call and the reset button of

the call.

As a visual signal is used an F411 / 2 that turn on

the light of tranquillisation within inside the room

affected and the light detection alarm outside the

environment from which the call originated.

When an event will appear in the H4684 and

H4690 touch, that has been installed and configu-

red the firmware "Call Management", the screen

show you the call pages, which will be accompa-

nied by a two-tone differently alarm, depending

on the type of call (room or bathroom).

This will be represented with the number and de-

scription of the environment on, accompanied the

hour and date of the event.

It present a red band which, if present more than

one events, displayed alarms contemporaries as

long as alarms will be reset to disappear from the

list.

F411/2

3477

H4684

Call Management

Firmware

Touch 3,5” & 10” Control

Product Description

Via G.Toniolo, 28

30030 Vigonovo (VE)

www.stitalia.com – info@stitalia.com

Record the event log :

Thanks to a download software the log events

can be exported automatically to a single XML da-

tabase.

With the firmware "Call Management" you can

generate reports very accurate and configurable,

allowing to obtain a clear and detailed work, and

an assessment of the viability and efficiency of the

operators.

The archiving of events to the XML database is

simple and transparent. The GUI Firmware "Call Ma-

nagement" with a warning icon will indicate that

the memory is full of reports (about 3020 events

logged) and that we must proceed to download

on a personal computer.

The physical connection that allows the down-

loading of data is the ethernet port in the back of

the touch screen, connected on a present net-

work or directly to PC with Cross cable.

This allows you to downloading without moving or

removing the touch from the wall.

The software to download data on personal

computers running only on Windows platform. Example of Firmware “Call Management” for

Touch 3,5” & 10”

F411/2

3477